Hey, I just wanted to ask is it possible to lower the vibrations? Since I moved to ICS/JB i just can' t get used to it. In 2.3 roms they were much lower or i even could set them in settings.
So, is it possible to lower vibrations on JB?
Magic Stick said:
Hey, I just wanted to ask is it possible to lower the vibrations? Since I moved to ICS/JB i just can' t get used to it. In 2.3 roms they were much lower or i even could set them in settings.
So, is it possible to lower vibrations on JB?
Click to expand...
Click to collapse
I think the kernel semaphore has that option
Alexis0o said:
I think the kernel semaphore has that option
Click to expand...
Click to collapse
Thanks for reply, but as u can see from thread name, i do not own i9000, i have i9001 so this kernel would brick my device
Magic Stick said:
Thanks for reply, but as u can see from thread name, i do not own i9000, i have i9001 so this kernel would brick my device
Click to expand...
Click to collapse
Ops im sorry, i didn't see this..
What rom are you on? CM has vibration settings in system settings
Sent from my GT-I9000 using xda premium
Hr Kristian said:
What rom are you on? CM has vibration settings in system settings
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I' m using unofficial port of CM10 by ivendor, and looking in settings --> system i don' t see vibrations option.
If your kernel have a kernel manager, like:
Devil kernel - devil kernel manager
Semaphore - semaphore manager
You can look at your's if your kernel have one, google it
Sent from my GT-I9000 using xda premium
Under "about phone" you can see your kernel info, the stock CM10 kernel allows vibration control, and the setting is located in system settings somewhere, so you'll have to check your kernel, and then if the one you have isn't the stock, if it has a management app.
Sent from my GT-I9000 using xda premium
Related
Hi
I'm running GALNET MIUI v6 VERSION, BASED ON OFFICIAL 1.7.22 - 22/07/11 - STABLE. http://forum.xda-developers.com/showthread.php?t=1134583
Earlier the soft keys (menu and back) used to lit up when I had a notification, like a LED light. Now this doesn't happen anymore. Is this a setting, or is it simply not possible anymore?
Any fix to make this happend would be greatly appreciated!
I'm posting this here, because I don't have enough posts to post it in the galnet thread.
Try using the app - BLN
Sent from my GT-I9000 using XDA App
Thanks a lot for the suggestion! Sadly, my kernel doesn't seem to support this :/
Bln is neldars script for sammy roms, try using glitch kernel, that h has it
Sent from my GT-I9000 using XDA Premium App
Prateek G. said:
Try using the app - BLN
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Read the question, duff advice!
Sent from my GT-I9000 using XDA Premium App
slaphead20 said:
Bln is neldars script for sammy roms, try using glitch kernel, that h has it
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
If I switch to the glitch kernel, will I loose any features, or would the battery drain increase etc? Is it a complex procedure to switch kernels?
klikka said:
If I switch to the glitch kernel, will I loose any features, or would the battery drain increase etc? Is it a complex procedure to switch kernels?
Click to expand...
Click to collapse
Very easy on the insanity cm rom but don't know about miui. Glitch can be oc/uv, so battery is better, if your chip allows it, but read up thoroughly before you start messing
Sent from my GT-I9000 using XDA Premium App
I use Team ICSSGS RC4.2 with Semaphore 0.9 (and 0.8.x before) for quite some time now, and very happy with it.
I even have BLN working with enabling it in NSTools.
My problem is that every time I have the phone restarted for ever reason there is, I get a boot loop, until I clear NSTools settings in recovery mode.
Does anyone have any other way to have BLN without the use of NSTools?
Bln control - free app from market
Sent from my GT-P7500 using xda premium
scubadude said:
Bln control - free app from market
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
I did try it at first before NSTools and it didn't work.
But I'll give it another try...
ulituan said:
I did try it at first before NSTools and it didn't work.
But I'll give it another try...
Click to expand...
Click to collapse
hallelujah...
Removed NStools and cleared its settings in recovery mode.
Installed BLN control app again. and... it works now.
Strange but true.
10x
Glad its working.
Sent from my GT-P7500 using xda premium
the Sema 0.9.0 is very buggy the 0.8.1 is better it is stabel and fast and bln is working for me
There is a update 0.9.1 which is better than 0.9.0
Sent from my GT-P7500 using xda premium
sorry, bur how do I install this kernel in the same ROM as you? i know its easy, but you know, a noob is a noob xd.
And how does Semaphore feel in this ROM?
Sent from my GT-I9000 using XDA App
pixelexip said:
sorry, bur how do I install this kernel in the same ROM as you? i know its easy, but you know, a noob is a noob xd.
And how does Semaphore feel in this ROM?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
just:
Download the kernel file (ZIP)
Place it on the phone
boot to recovery mode
apply the update by choosing the file
hi,
i've a galaxy s with Cyanogen Mod 10.1 Nightly intalled and currently up to date.
but i have a problem, my phone sometime reboot and i can't discover the cause of this.
i try to uninstall my apps one by one but with no positive results.
i thought the problem was the CM10.1 because is a nightly rom, so i've installed the stable version of CM10 but the problem appears again.
so now i have installed again the CM10.1 .
can someone help me with this problem ?
thanks a lot and sorry for my bad english
None can help me?
Deep idle enabled?
Sent from my GT-I9000 using xda app-developers app
Latrop said:
Deep idle enabled?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
hi, thanks for the answer.
i don't know it deep idle is enabled. how can i do to see this?
thanks
Check the nstools app if you don't have it, its on play store
Sent from my GT-I9000 using xda premium
maybe you flash the ROM something wrong and break the system
Sent from my GT-I9001 using xda premium
lomba91 said:
hi,
i've a galaxy s with Cyanogen Mod 10.1 Nightly intalled and currently up to date.
but i have a problem, my phone sometime reboot and i can't discover the cause of this.
i try to uninstall my apps one by one but with no positive results.
i thought the problem was the CM10.1 because is a nightly rom, so i've installed the stable version of CM10 but the problem appears again.
so now i have installed again the CM10.1 .
can someone help me with this problem ?
thanks a lot and sorry for my bad english
Click to expand...
Click to collapse
Which kernel you are using?
you may try this,
1) reflash the rom with full wipe.
2) if you are overclock the OC clear int.d and NStool setting or using kernel cleaning script
note: only use one kernel setting apps ( e.g NStool , semaphore manager and +++)
If you are using semaphore kernel try not to use NStool setting and semaphore manager.
Hope this will help. :fingers-crossed:
Samtan4326 said:
Which kernel you are using?
you may try this,
1) reflash the rom with full wipe.
2) if you are overclock the OC clear int.d and NStool setting or using kernel cleaning script
note: only use one kernel setting apps ( e.g NStool , semaphore manager and +++)
If you are using semaphore kernel try not to use NStool setting and semaphore manager.
Hope this will help. :fingers-crossed:
Click to expand...
Click to collapse
i've already flashed the rom with full wipe but nothing change.
i use the the cm10.1 kernel without overclock.
Latrop said:
Check the nstools app if you don't have it, its on play store
Click to expand...
Click to collapse
i've installed the nstools app and i have min CPU on 100mhz, max Cpu on 1000mhz and the ondemand governor.
Try a different kernel
Sent from my GT-I9000 using xda premium
Latrop said:
Try a different kernel
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
what kernel you think i sould try?
Semaphore if that don't work there's Mackay and devil as well
Sent from my GT-I9000 using xda premium
i've flashed semaphore kernel and reinstalled the cm 10.1 rom.
but there is always the same problem
In not sure mate sorry
Sent from my GT-I9000 using xda premium
i think the problem is the app of the sim card, because sometime it disappear from the drawer. This app is named "kit strumenti sim" (in italian) and is a default app...
I kinda have a similar problem with the OP. Except, my SGS (running CM10.1) only random reboots if I'm using another kernel, other than stock (mostly, I tried with Semaphore, diff builds). Any ideas anyone?
I would really like to use Semaphore, due to its deep idle and other options.
Sorry if I off-topic'ed here!
lomba91 said:
i've flashed semaphore kernel and reinstalled the cm 10.1 rom.
but there is always the same problem
Click to expand...
Click to collapse
if you flash semaphore kernel(2.9.++ is for 4.2.++ ROM) and reflash the cm10.1 rom yor kernel will change to cm10.1 stock kernel.
so the step should be flash the rom and reboot to recovery and flash the kernel you like. for me flash a new kernel i will clear the NStools settings and init.d directory from advanced clear before i flash any new kernel.
Hello guys.
I am about to use cm10.1. I would like to make my phone faster but overclock is rebooting my phone too often, also it gets hot really easily. Is there anything 'speed kernel compatible with cm10 / up ?
Sent from my GT-I9000 using xda premium
Zahovay said:
Hello guys.
I am about to use cm10.1. I would like to make my phone faster but overclock is rebooting my phone too often, also it gets hot really easily. Is there anything 'speed kernel compatible with cm10 / up ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Semaphore kernel is compatible and fast
however, you have to play with the governors and scheduler to change speed without overclocking (also in stock kernel)
look your best configuration
Overclock
quack75 said:
Semaphore kernel is compatible and fast
however, you have to play with the governors and scheduler to change speed without overclocking (also in stock kernel)
look your best configuration
Click to expand...
Click to collapse
Could u give me a link about a thread that includes the kernel and the way how to set it up? I haven't done kernel change for ages..
And amm.. I don't mind overclocking but if I have to, I need one that does not reboot every 3rd minute...
Zahovay said:
Could u give me a link about a thread that includes the kernel and the way how to set it up? I haven't done kernel change for ages..
And amm.. I don't mind overclocking but if I have to, I need one that does not reboot every 3rd minute...
Click to expand...
Click to collapse
here it is
http://forum.xda-developers.com/showthread.php?t=1786220
and a tread for the app to manage the kernel ( is in a play store)
http://forum.xda-developers.com/showthread.php?t=1886686
quack75 said:
here it is
http://forum.xda-developers.com/showthread.php?t=1786220
and a tread for the app to manage the kernel ( is in a play store)
http://forum.xda-developers.com/showthread.php?t=1886686
Click to expand...
Click to collapse
I have to flash the kernel right after the flashed rom?
Zahovay said:
I have to flash the kernel right after the flashed rom?
Click to expand...
Click to collapse
yes
So i just flashed a custom kernel (iodak) and i went into the software information and saw the kernel version is the same. Is it supposed to be like this or should it have the custom kernel name?
theofficialpimp said:
So i just flashed a custom kernel (iodak) and i went into the software information and saw the kernel version is the same. Is it supposed to be like this or should it have the custom kernel name?
Click to expand...
Click to collapse
Download "no frills CPU" from play store and see if you can overclock the device to 1700mhz
Sent from my LG-P880 using Tapatalk 2
lol i dont think you get what im saying, is it supposed to say the name of my custom kernel (iodak v07) under software information in stock rom?
theofficialpimp said:
lol i dont think you get what im saying, is it supposed to say the name of my custom kernel (iodak v07) under software information in stock rom?
Click to expand...
Click to collapse
no it shouldnt it just says 3.1.10 ...you should find out by installing trickstermod from play store for free ... u find kernel name includes ([email protected]) thats it u got iodak kernel
Thanks just one more q, is there an app out there that shows the cores that are running?
I wanna know if my low power core is working with this kernel because the 'Show CPU Usage' option under hidden menu just says 0mhz.
Sent from my LG-P880 using xda app-developers app
theofficialpimp said:
Thanks just one more q, is there an app out there that shows the cores that are running?
I wanna know if my low power core is working with this kernel because the 'Show CPU Usage' option under hidden menu just says 0mhz.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Trickster MOD shows running cores.