Database Develop

Cyanogenmod to Stock

Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks

did you use PIT and check REPARTITION when you flashed back to JPY ??

azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar

azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....

right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.

probably samfirmare.com ?

yeah just been looking on there they all seem to be 1 file

Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?

install another firmware like jpjpa with 3 files and then flash xxjpy on it

Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?

Will kies be of any help if i put phone in download mode and attach it with kies?

well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,

zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA

How to get three files as it is only 1 exe file?

exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??

azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????

zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on

ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?

http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit

azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.

[Q] cant find correct pit/tar files for odin

I'm trying to use full odin(1.7) to go back to stock an at&t captivate. I've used odin one click before without a problem, but i would like to do this with the full version of odin. I watched the tutorial video from the stickies in this forum.
I downloaded an odin+pit file I found here on xda. odin recognizes my phone, but when i go to pit I have three pit file choices(S1_odin_20100512.pit, S1_odin_20100513.pit, S1_odin_20100512.pit) and no matter which one I click, I cant find a rar file when I click pda.
I've now downloaded a couple of different rar files: I897UCJH7.rar, and I897UCJH2.rar
I dont know which one to use, or even if I'm choosing the right pit file.

You have to unrar them first... The .pit and .tar should be in there.
A nice easy way to do this is explained in: http://forum.xda-developers.com/showthread.php?t=995143

venomio said:
You have to unrar them first... The .pit and .tar should be in there.
Click to expand...
Click to collapse
which one should i use? I don't know what the difference is

I've just modified my first post. Follow the instructions there

Stock .tar firmware?

i am looking for completely stock .tar files to flash through odin
i bricked my tablets and i need to revert to stock. I have the stock recovery file but i can't find a stock rom or a .pit file

You can find it here,
http://forum.xda-developers.com/showthread.php?t=1582943
and make sure you got the correct stock rom for your tab version.
Installation guide is there too.
also when using odin, make sure KIES is not running on tray
(for windows: [ctrl + alt + del] > Processes tab > terminate KiesTrayAgent.exe)

it doesn't have the US model listed

It doesn't really matter,As long as it has english language.
Because you're only going to use it to get the recovery back working to flash another rom.
Just grab the latest firmware for the 8.9 wifi only model, P7310XWKI2

one last question? any idea where i can get the .pit file?

There isn't a need in using .pit file.
and i don't know where to get it.
The *.tar.md5 file you found after unzipping it will just do.
load is to the PDA in odin3.

MrHome said:
There isn't a need in using .pit file.
and i don't know where to get it.
The *.tar.md5 file you found after unzipping it will just do.
load is to the PDA in odin3.
Click to expand...
Click to collapse
Someone help me out.... when I unzip, I don't have a .tar or a .md5 file.

to many stock roms...
http://www.sammobile.com/firmware/
best regards

gerickt said:
to many stock roms...
http://www.sammobile.com/firmware/
best regards
Click to expand...
Click to collapse
No help at all.

SmittyRN said:
No help at all.
Click to expand...
Click to collapse
There is a thread for that. Redownload your desired firmware.

[Q] How to flash a firmware downloaded from Samfirmware?

Hi,
I'm looking to update my Samsung Galaxy S GT-I9000 to the latest official Gingerbread released here in Australia. I have gone here to find and download the firmware. In all the videos I've watched, you're required to use multiple files in Odin to flash a firmware(pda, phone, csc, pit). My problem is though when I opened the downloaded firmware there was only one file, a .tar file. How would I go about flashing this?
Thanks.

smithchipz said:
Hi,
I'm looking to update my Samsung Galaxy S GT-I9000 to the latest official Gingerbread released here in Australia. I have gone here to find and download the firmware. In all the videos I've watched, you're required to use multiple files in Odin to flash a firmware(pda, phone, csc, pit). My problem is though when I opened the downloaded firmware there was only one file, a .tar file. How would I go about flashing this?
Thanks.
Click to expand...
Click to collapse
Don't flash that. You may run into a problem. I recommend you use GB flashing kit from here: http://d-h.st/4np and flash it. Its for galaxy s. Its got everything you need. If you want a step by step instruction go here: http://forum.xda-developers.com/showthread.php?t=1637966. That is how to use it. I hope I helped! It worked for me!

smithchipz said:
Hi,
I'm looking to update my Samsung Galaxy S GT-I9000 to the latest official Gingerbread released here in Australia. I have gone here to find and download the firmware. In all the videos I've watched, you're required to use multiple files in Odin to flash a firmware(pda, phone, csc, pit). My problem is though when I opened the downloaded firmware there was only one file, a .tar file. How would I go about flashing this?
Thanks.
Click to expand...
Click to collapse
Just use Odin.. it's quick and easy...
Just put .tar file in PDA and flash.. don't tick repartition..
If my post helped, don't mind hitting THANKS

drakester20 said:
Just use Odin.. it's quick and easy...
Just put .tar file in PDA and flash.. don't tick repartition..
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
It contains a pit file so it should auto tick repartition

slaphead20 said:
It contains a pit file so it should auto tick repartition
Click to expand...
Click to collapse
When I add the tar file in the PDA section it doesn't auto tick repartition though?
Sent from my Transformer TF101 using xda app-developers app

smithchipz said:
When I add the tar file in the PDA section it doesn't auto tick repartition though?
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
I would just flash in pda , should be ok

How flash a kernel with odin?

Hello. how do it?
my kernel is zip
kernel-2.6.35.7-I9000ZSJW4-CL1147074-20120612
and odin on pda just can flash .tar
i extract zip and make zimage to a new .tar file but odin don't flash it
also with CWM recovery i want install zip file kernel but don't install and show install abort

no answer me?

...
jest put the file in PDA!!!

moh3en said:
Hello. how do it?
my kernel is zip
kernel-2.6.35.7-I9000ZSJW4-CL1147074-20120612
and odin on pda just can flash .tar
i extract zip and make zimage to a new .tar file but odin don't flash it
also with CWM recovery i want install zip file kernel but don't install and show install abort
Click to expand...
Click to collapse
what do you get if you unzip the file?
If you get a .tar file, just put it in the PDA in odin and start.
Or maybe look for another .zip or .tar file of the JW4 kernel.

moh3en said:
Hello. how do it?
my kernel is zip
kernel-2.6.35.7-I9000ZSJW4-CL1147074-20120612
and odin on pda just can flash .tar
i extract zip and make zimage to a new .tar file but odin don't flash it
also with CWM recovery i want install zip file kernel but don't install and show install abort
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1570488
this should be usefull...dont make your own tar files like that...better use the one`s u can download from the threads, here u have a guide what to do ,and donwload files, hope it helps...
gl :highfive:

flash without extracting zip file
moh3en said:
Hello. how do it?
my kernel is zip
kernel-2.6.35.7-I9000ZSJW4-CL1147074-20120612
and odin on pda just can flash .tar
i extract zip and make zimage to a new .tar file but odin don't flash it
also with CWM recovery i want install zip file kernel but don't install and show install abort
Click to expand...
Click to collapse
flash without extracting zip file in pda

Dear
When you download a kernel it's in 2 type one type is for flash with cwm and once for Odin if be zip is for cwm if be in tar extension is for Odin for Odin you should download tar and don't extract it. Just put it in pda section and finish
Sent from my GT-I9000 using xda premium

If the kernel is a zip file I would use SGS Kernel flasher app (on Google Play).
It backs up your current kernel before flashing.

if it is tar flash with odin.

ssregitoss said:
if it is tar flash with odin.
Click to expand...
Click to collapse
LOL check dates of the posts before answering, new forum mate!
The one you answered was half year old :fingers-crossed:

But i haven`t seen it :silly:
tetakpatak said:
LOL check dates of the posts before answering, new forum mate!
The one you answered was half year old :fingers-crossed:
Click to expand...
Click to collapse