Review of Asus Nexus 7 Travel Case - Slimmest case with best fit - Nexus 7 Accessories

Here is my review http://smartphoneblogging.com/2012/...-its-not-half-as-bad-as-many-reviews-suggest/
Even with all of its shortcomings I prefer this to all those huge and ugly leather cases. Its slim, light and has great grip...I don't care much about the missing magnet, but I do miss the stand function though...

I agree with the review, but they could have done better in designing it. I found a lot of the cases don't look to nice, so I just keep mine in a neoprene case for when I take it out, the tablet is naked.

I have also been thinking to live without a case but at the end I need something which completely wraps around my nexus 7 without adding bulk. I had a pouch too but it was too cumbersome to take it out of it all the time...at the moment there is no better solution for me than the nexus travel case...

Mine, like every phone I've owned lately, lives in a TPU skin, and I just pop it in the lovely Portal-themed felt sleeve my girlfriend made me when I'm out of the house. I don't really trust myself using a naked device at all. The times my devices come out of their TPU skins are almost certainly the time I will drop them... lol

Lack of magnet sleep and magnetic close could have made the case a lot better, but I think. I don't have it yet so I might try to mod it a little with some relatively weak magnets and some tape if I can help not taking the away from its sleekness.
Sent from my SAMSUNG-SGH-I747 using xda premium

I agree 100%. Just bought original case in light gray and it is fantastic. Such a nice look, looks good quality and feels great in hand. I don't mind the stand, I don't mind that the cover can flip open because there's no security button or something (I have it in my pocket anyway so there's not much room to flap open) what I mind is the magnet because the power and volume buttons are a bit awkwared to press since they're covered with silicone. I mean, it's easy to press, no problems there, it just works - but there is no "click" feeling to it. Even though it is pretty expensive here in the Czech rep (500 Crowns, that;s like 20 Euros) I don't have regrets - the build quality is great and it looks and feels fantastic.
cheers,
D.

dalanik said:
I agree 100%. Just bought original case in light gray and it is fantastic. Such a nice look, looks good quality and feels great in hand. I don't mind the stand, I don't mind that the cover can flip open because there's no security button or something (I have it in my pocket anyway so there's not much room to flap open) what I mind is the magnet because the power and volume buttons are a bit awkwared to press since they're covered with silicone. I mean, it's easy to press, no problems there, it just works - but there is no "click" feeling to it. Even though it is pretty expensive here in the Czech rep (500 Crowns, that;s like 20 Euros) I don't have regrets - the build quality is great and it looks and feels fantastic.
cheers,
D.
Click to expand...
Click to collapse
Thanks, that's exactly my opinion. I wonder why Asus didn't support at least the magnet...

what i'd really want is a bumper case, with a cover for the screen. The back really doesn't need protection from scratches and stuff like the iPad. Still caseless and waiting

ace9988 said:
what i'd really want is a bumper case, with a cover for the screen. The back really doesn't need protection from scratches and stuff like the iPad. Still caseless and waiting
Click to expand...
Click to collapse
True. Basically I'd love to have a smart cover like Apple provides. It only covers the screen. I also think that the Nexus 7 doesn't need an additional back cover.
A small bumper with a screen cover is really a nice idea.

What I like about the original Asus cover is that it changes the color of your Nexus - I have light gray color and it is almost white, so the Nexus looks completely different Yes, no need for back cover, but kinda nice to see it it light gray or any other color they offer

I hear this was a flop to. I was considering accessories for m N7.
But I dont want to loose the back rubber with I love. and the Damn N7 will slip right in my back pocket if I need to go make a tech call.
I'm hereby going caseless.

{StatuSCheckA} said:
I hear this was a flop to. I was considering accessories for m N7.
But I dont want to loose the back rubber with I love. and the Damn N7 will slip right in my back pocket if I need to go make a tech call.
I'm hereby going caseless.
Click to expand...
Click to collapse
The official travel case has a nice rubber back with similar feel to the real nexus back...

If just it had a magnet and were able to be folded as a stand, it would be great!
Sendt fra min Nexus 7

Actually I wonder why no 3rd party just copied the material and fit of the official case and added magnet+stand feature...or at least one of those two features...

AW: Review of Asus Nexus 7 Travel Case - Slimmest case with best fit
I ordered the latest fashion cover from nillkin, which looks good but feels cheap.
http://item.mobileweb.ebay.de/viewitem?itemId=200853493504
After some days of usage I switched back to the travel case, which still just feels the best overall. It has more grip and is slimmer than the eBay smart covers...

Shahpur.Azizpour said:
Here is my review http://smartphoneblogging.com/2012/...-its-not-half-as-bad-as-many-reviews-suggest/
Even with all of its shortcomings I prefer this to all those huge and ugly leather cases. Its slim, light and has great grip...I don't care much about the missing magnet, but I do miss the stand function though...
Click to expand...
Click to collapse
Ok at first I thought no auto sleep, a person can deal. Then I read no way to keep it closed. Since the glass is not gorilla glass this is a deal breaker. Scratch scratch scratch.
So they are going to make a premium case too?

Raech said:
Ok at first I thought no auto sleep, a person can deal. Then I read no way to keep it closed. Since the glass is not gorilla glass this is a deal breaker. Scratch scratch scratch.
So they are going to make a premium case too?
Click to expand...
Click to collapse
Here's my solution:
http://forum.xda-developers.com/showpost.php?p=36803793&postcount=18
https://www.dropbox.com/s/08q86hzkthnkqts/2013-01-10 21.26.44.mp4

AW: Review of Asus Nexus 7 Travel Case - Slimmest case with best fit
Raech said:
Ok at first I thought no auto sleep, a person can deal. Then I read no way to keep it closed. Since the glass is not gorilla glass this is a deal breaker. Scratch scratch scratch.
So they are going to make a premium case too?
Click to expand...
Click to collapse
The premium case is all but vanished. After the initial leaks there have been no further news regarding the premium asus cover.

AW: Review of Asus Nexus 7 Travel Case - Slimmest case with best fit
Aleemz said:
Here's my solution:
http://forum.xda-developers.com/showpost.php?p=36803793&postcount=18
https://www.dropbox.com/s/08q86hzkthnkqts/2013-01-10 21.26.44.mp4
Click to expand...
Click to collapse
I don't want to manually mod the case, that's not my job. Your solution is nice, but its ridiculous that Google or Asus let it come to this. They should give us a premium case.

Picked one up tonight at Walmart. Was looking for a generic case and I was happily suprised to see one. $29.88. By the time Google gets tax and shipping it was worth the extra.
I really like it so far.

Related

Devicewear The Ridge Case

I was just surfing amazon and found a case available that i hadn't seen before. It's by Devicewear, called The Ridge. I can't link to it as it's my first post, though i thought i'd give everyone a heads up.
Seems like an awesome case, with everything that I was looking for:
Slim profile, hard backing, folio cover, auto sleep/start, microfiber lining, decent price, available.
I ordered it and should be arriving tomorrow, i'll try to take some pics and have a short review soon if people are interested. I already have the poetic hardback, which is nice, but this one seems to be the perfect case for me.
That looks pretty nice, looking forward to your review.
Just registered and first post. Free advertisement?
Looks like a sleek case. How much did you spend?
Sent from my Nexus 7 using Tapatalk 2
All the reviews on Amazon by users with just one review and all posted within a few days. Lots of similarity in text (it snaps in!) For what it's worth.
nm8 said:
Just registered and first post. Free advertisement?
Click to expand...
Click to collapse
Hahaha no it's just a coincidence this is my first post. Now that I read back on it, it does sound like i'm advertising lol. I've been perusing the posts on here for a little and hadn't seen anything on this particular case.
ticktak said:
Looks like a sleek case. How much did you spend?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
It was $25, which I didn't think was too bad, it seems like a decent case.
the case looks nice I'll be waiting to hear what you think when you receive it
Looks very nice.
The thing I don't like are the two things on the front flap to keep closed.
Decent price.
I really like this - wish it came in more colors
Looks nice, very convenient marketing scheme as well.
GatorsUF said:
Looks nice, very convenient marketing scheme as well.
Click to expand...
Click to collapse
Totally is a good marketing scheme. Made me realize that this case is in the market and I bought it because it looks like the best one for my needs available.
I looked up a review of their iPad case and they check out:
http://www.youtube.com/watch?v=rOsH-owEJv0
Quick Review and pics
Wow, I had no idea that me posting that would make it seem like I'm schilling for them. Not sure what I can say to have you guys believe otherwise, but oh well. I'm not affiliated with them in any sense.
Anyways, for those that would care, it came in today (yay Amazon next-day shipping!) and I took some ****ty cell-phone pics and have some initial impressions.
The Good:
Very slim profile, doesn't add much bulk at all.
While not real, the "vegan leather" does feel pretty good and grippy in the hand. Definitely better than the pu leather stuff.
The inner lining of the front cover has some sort of rubbery, felt-ish material that seems like it will protect pretty well against scratches n such.
All buttons, ports and speakers are well-exposed and have easy access.
I love the combo of hard case to protect the back and cover for the front.
Auto sleep/awake seems to work pretty well.
The Nexus does fit pretty snugly in the case, doesn't seem like it will pop out unless coaxed.
The little ridges in the front cover line up with a ridge on the inside edge of the case to prop it up at multiple angles. It seems really sturdy, and a lot less bulky than the giant deep ridges i have in my poetic hardback.
It also flips over for a pretty good typing angle.
The not so good:
The PU backing seems a little flimsy, I've never had one of these hard cases before so I'm not sure how sturdy they normally are, but it seems like it flexes kind of easily.
While the clamps on the top and bottom edges of the cover hold it in place pretty well, they are definitely pretty flimsy and don't "snap" like you would like them to. I can also see them getting in the way, it would have been nice if they would have found another way to keep the cover shut against the tablet, like a magnet or a clamp on the right side. At least it stays in place though.
Because the case is synthetic leather, it does have a chemical smell to it, which i'm sure will dissipate over time.
Overall, I'm pretty impressed with the case. I really wish the plastic was a bit sturdier, the poetic slimline from the pictures I have seen looks a little thicker. I really do like it, and I'm happy I made the purchase. If anybody wants more pics let me know and I'll do what I can.
Looks like the clips would get in the way if the front flap was folded all the way back like a book and then set on a flat surface. Correct?
Sent from my Nexus 7 using xda premium
Looks nice, but the $57 shipping tag to Australia is bloody steep. Although you have a regular $11 mail service to here its not tracked, and after having 6 things lost in the post over the years I can't trust it.
Sent from my Nexus 7 using Tapatalk 2
$57 to Australia? I'll look elsewhere for a case.
Sent from my Nexus 7 using XDA Premium HD app
kam14132 said:
Looks like the clips would get in the way if the front flap was folded all the way back like a book and then set on a flat surface. Correct?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
They are noticable, but don't get in the way nearly as much as I would have thought. I have noticed, however, that with the back folded all the way back the magnet is strong enough to put the tablet back to sleep, so I have to put a finger in between to keep it on. Definitely annoying.
This is definitely one of the better looking cases for the N7. Its a little pricey though.
Nice review.
Sent from my Nexus 7 using XDA Premium App
DrBunsen said:
I have noticed, however, that with the back folded all the way back the magnet is strong enough to put the tablet back to sleep, so I have to put a finger in between to keep it on. Definitely annoying.
Click to expand...
Click to collapse
Looks like a great case except for this point, definitely a problem. I wonder if it's possible to take out the magnet somehow, I don't even care about the wake/sleep function much.
DrBunsen said:
While the clamps on the top and bottom edges of the cover hold it in place pretty well, they are definitely pretty flimsy and don't "snap" like you would like them to. I can also see them getting in the way, it would have been nice if they would have found another way to keep the cover shut against the tablet, like a magnet or a clamp on the right side. At least it stays in place though.
Click to expand...
Click to collapse
Is it possible to fold it in such a way that the clamps are facing up the back case (when folded back for reading), so that maybe they can snap onto the PU backing?
I guess it's a bit hard to explain but since the front cover extends all the way to the middle of the back case, is it possible to fold that part to an opposite direction (instead of folding the usual line along on the left edge of the case)
If this works, maybe it can avoid the problem you mentioned in another post, about the magnet being too strong and put the device to sleep when the front is folded back.
xthaox said:
Is it possible to fold it in such a way that the clamps are facing up the back case (when folded back for reading), so that maybe they can snap onto the PU backing?
I guess it's a bit hard to explain but since the front cover extends all the way to the middle of the back case, is it possible to fold that part to an opposite direction (instead of folding the usual line along on the left edge of the case)
If this works, maybe it can avoid the problem you mentioned in another post, about the magnet being too strong and put the device to sleep when the front is folded back.
Click to expand...
Click to collapse
I don't think there's any way you can get the clips to face that direction, but I have found that if you keep the cover folded along the natural crease, forming a little triangle, I've been able to avoid the problem as well as giving you a nice little grip to hold onto. Thus far I am really enjoying the case. Although now part of me wants one of the Portenzo or Treegloo cases, they look really nice.

Case needed

Hi all
This is the only case I've seen so far, not in stock yet.
http://www.mobilefun.co.uk/sony-xperia-t-sma6122b-hard-shell-black-p36161.htm
Any more about ?
There are a few on Amazon UK, you seem to need to search for ""xperia t" case" to get them to come up, perhaps because they are so new and not ranked correctly in search
Ordered a TPU one.
Sent from my Nexus 7 using Tapatalk 2
I got mine on eBay.
Check This, http://www.krusell.se/en/products/mse
Could you guys that have already got cases, post a review/some pictures?
I'm on the look out for a good case and I'm sure others would appreciate it too.
LadFromWales85 said:
There are a few on Amazon UK, you seem to need to search for ""xperia t" case" to get them to come up, perhaps because they are so new and not ranked correctly in search
Ordered a TPU one.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Many thanks, ordered the smoke black TPU case from Amazon. Will let people know what it's like when I get it.
jonsmith709 said:
Many thanks, ordered the smoke black TPU case from Amazon. Will let people know what it's like when I get it.
Click to expand...
Click to collapse
Ordered this so far..
http://www.ebay.co.uk/itm/TPU-GEL-RUBBER-CASE-FOR-SONY-XPERIA-T-CLEAR-BLACK-/290774906437?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item43b388f645
got a black S line case as well..though it seems bit flimsy on the sides and constantly snapping around when u use the screen.
powerhdlte said:
ROCK Naked shell Case For Xperia T
Click to expand...
Click to collapse
This looks like it may be the best of the bunch thus far. Gonna order one this weekend.
Got this one also from MobileFun.
I'm hoping a better quality TPU case will come along.
The one I mentioned above from Amazon does the job but its not a good fit. There is a clear gap near the headphone socket viewed from the front, and it doesn't sit flush along the front bottom.
Will keep it safe for now though
Sent from my Nexus 7 using Tapatalk 2
Just reposting something I posted in another thread.
I bought a Terrapin Solid Black Hybrid Rubberised Back Cover / Case / Shell / Shield + 6-in-1 Screen Protector Pack for Xperia T from Amazon and it arrived almost a week earlier than estimated (2 days delivery!)
Best bit is it was only £4 so it's amazing value for money. It doesn't feel cheap at all and the material feels very smooth with a matte finish. Almost the same texture as the T's back case. The fit is perfect too - it snaps on to either sides of the phone with only openings at the top and bottom and the device feels very secure in the case.
The aforementioned sides of the case also raise slightly higher (about a mm or so) than the screen so if you were to rest the phone on a flat surface face down the screen never touches. In regards to accessing the side buttons (Power, Volume controls and Camera button) they're all very easy to press - unless you have fat fingers or overgrown nails.
I highly recommend getting one from Amazon since the delivery came earlier than expected and even if you want something more protective (leather flip case, bumper etc) this is only £4 and makes a great temporary case.
Link to the case can be found herehttp://www.amazon.co.uk/gp/aw/d/B009HRVW7W/ref=mp_s_a_4?pi=SL75&qid=1350000465&sr=8-4
Links to photos I took can be found here.
https://www.box.com/shared/cdk3hwzm0s9tkx98cubb
My apologies if the photos aren't very clear. They were taken with my girlfriend's iPhone 4 - at night - in the kitchen. If you want I can take a few outside tomorrow morning in the sunlight at whatever angles you want. As you can see the case hardly adds any bulk to the phone - about 1.5 mm either side and 1.5 mm on the back.
The Rock naked case is really nice, have no issues with it so far and looks great.
Just bought the Krussel one, very handsome, well fiting and comfortable touch...I really like it and don't regret my money...
Next week i gonna get my Xperia T and i gonna order this case
http://www.ebay.nl/itm/Protect-Sili..._PDA_Taschen_Schutzhüllen&hash=item3f1caf26d3
love the design :good:
Quick question: What kind of case is best for impact protection, a hard case or a TPU case? Also, how badly will each type affect the phone's ability to cool itself? I've never used a case for my phones before, and I'm kind of worried about exposing the softer TPU case to the hot afternoon sun when I use my phone as a GPS, so I would like some advice if possible.
Anderone said:
Just reposting something I posted in another thread.
I bought a Terrapin Solid Black Hybrid Rubberised Back Cover / Case / Shell / Shield + 6-in-1 Screen Protector Pack for Xperia T from Amazon and it arrived almost a week earlier than estimated (2 days delivery!)
Best bit is it was only £4 so it's amazing value for money. It doesn't feel cheap at all and the material feels very smooth with a matte finish. Almost the same texture as the T's back case. The fit is perfect too - it snaps on to either sides of the phone with only openings at the top and bottom and the device feels very secure in the case.
The aforementioned sides of the case also raise slightly higher (about a mm or so) than the screen so if you were to rest the phone on a flat surface face down the screen never touches. In regards to accessing the side buttons (Power, Volume controls and Camera button) they're all very easy to press - unless you have fat fingers or overgrown nails.
I highly recommend getting one from Amazon since the delivery came earlier than expected and even if you want something more protective (leather flip case, bumper etc) this is only £4 and makes a great temporary case.
Link to the case can be found herehttp://www.amazon.co.uk/gp/aw/d/B009HRVW7W/ref=mp_s_a_4?pi=SL75&qid=1350000465&sr=8-4
Links to photos I took can be found here.
https://www.box.com/shared/cdk3hwzm0s9tkx98cubb
My apologies if the photos aren't very clear. They were taken with my girlfriend's iPhone 4 - at night - in the kitchen. If you want I can take a few outside tomorrow morning in the sunlight at whatever angles you want. As you can see the case hardly adds any bulk to the phone - about 1.5 mm either side and 1.5 mm on the back.
Click to expand...
Click to collapse
Got this today and its fantastic, well made and really suits the phone
Glad you like it. I haven't found anything better yet, which could be a good thing - it really is a nice case.
That said, I sent a message to Incipio on their facebook site and I got a response to keep an eye out on their company website in the next 2 weeks or so... I like their other Sony smartphone cases. Another great company is Krusell, they already have cases for Xperia T but they don't seem to deliver to the UK.
Sent from my LT30p using xda app-developers app
http://www.ebay.com/itm/SONY-XPERIA..._MobilePhonesCasesPouches&hash=item19d5f54b80
http://www.obostore.com/rock-big-ci...xperia-t-case-p-10396-c-238.html#.UIYwGrT9Fss
http://www.ebay.com/itm/NEW-GENUINE..._MobilePhonesCasesPouches&hash=item2a247aca69
I got my Rock case last week, and I have to say I love it. It feels tough, while not being obtuse or overbearing size wise. The edges on the screen side are tall enough to prevent the phone from resting on the screen itself when turned over, but don't stick up too much to be in the way.
Yeah I have the white Rock case and it's easily one of the nicest cases I've seen

Looking for a "grippy" protective case with non slip back

I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome
opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html
I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.
I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app
I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.

LUVVITT Clear Grip (Case Review)

I don't know if this case has been reviewed yet or not but I just got it today. I had to find a case quick and it needed to be cheap since I don't know if I'll be getting the HTC 10 or LG G5. It also needed to be available for same day Amazon shipping since I couldn't go another day without a case. Don't get me wrong, I would have loved to use this phone without a case but it's design makes it a little difficult for me. My palm is always touching the screen which causes some minor issues but my biggest complaint is while playing a game such as Trials Frontier. When playing a game like this, it starts to become uncomfortable after just 5 minutes of play. It's most likely due to the phones thin edges which are rounded but still sharp when holding it horizontally.
Anyway, this case fixed all of my issues. It still keeps the phone very thing but it provides just enough thickness to the edges to make the phone feel more comfortable when using. The case itself feels well made but I suppose there isn't much to screw up with a TPU case. All of the cutouts match up and the buttons stay very crisp. The case provides a nice grip without providing to much grip to where it becomes an issue sliding your phone in and out of your pockets. The actual fit of the case is very snug but it's still easy to remove. I suppose if you keep on removing it and installing it, there is a possibility it could become loose.
In regards to protection it's not going to work any miracles but I'm sure it would provide some kind of protection during drops. It's a super thin case that has the corners slightly raised. They are raised just enough to keep the display off of a hard surface if the phone falls face down or if you like keeping your phone face down on the table. These raised corners however only slightly sit above the front glass so dropping it on an uneven surface such as asphalt could have dire consequences. The back is no problem at all as the raised corners give the back glass more clearance.
If you're looking for a crystal clear super thin case that offers nice grip, decent protection and allows you to showcase this nice looking phone then you might be interested in it. If you care more about protection than the way your phone looks and feels then this probably isn't the case for you.
You can pick it up on Amazon for $12.99 (PRIME Eligible.)
Side Note: The Edge display keeps full functionality if that's important to you.
Where are all the "Real" pictures?
felloffthetruck said:
Where are all the "Real" pictures?
Click to expand...
Click to collapse
I did this late last night. I'll take some pictures today and add them.
i bought 4 luvvitt cases when they were like $4-5 on slickdeals including this one. haven't opened this one yet, but will. thanks for the review.
Does the back have texture? Does part of the phones glass back stick to it at all?
Also btw the sale on these cases (including the normal clear one) are still going on with the code SLICK007
johnnyz86 said:
Does the back have texture? Does part of the phones glass back stick to it at all?
Also btw the sale on these cases (including the normal clear one) are still going on with the code SLICK007
Click to expand...
Click to collapse
Yes. The back sides are textured. I also just removed it to see if it stuck and no it doesn't.
I don't know what kind of deal that coupon code gets you but it its $10 or less then I'd definitely get one. I needed the case same day shipped through Amazon Prime so I just paid full price.
Sent from my SM-G935T using Tapatalk
Actual pics?
Sent from my SM-G935T using Tapatalk
I also got one as well during the SD promo as well, Posted some pictures of it bellow and sorry if the quality is not up to par.
Just wanted to help out on the real pictures. It's fine I've been using the Spigen Tough Armor for now. Just wanted a clear one for home or if show of how nice the phone looks while still on case.
Thanks from the real pictures. I knew I was forgetting something today. My wife had me running around like a chicken with my head cut off today since we are having family over our house for Easter tomorrow.
Sent from my SM-G935T using Tapatalk
cmart4 said:
i bought 4 luvvitt cases when they were like $4-5 on slickdeals including this one. haven't opened this one yet, but will. thanks for the review.
Click to expand...
Click to collapse
can you detail your opinions about the build and pros cons of the Luvvitt cases.
Bought sleek armor and aside from the lack of lip it seems like a nice low profile case with some protection. Just dont like the fact that the phone when face down with the case does not have enough lip to protect the screen.
The home button rest directly on the surface.Testing this out I caused micro scratches on the home button which is naturally a bit raised.
Would love pics and opinions on what yours are like...

[Review] Noreve Ambition Leather Pouch

Hi guys and gals, it's been a while since I've done a case review and this time it's a case from French manufacturer Noreve, who are known for their hand made, premium and genuine leather cases.
This time around I decided to go for a pouch, as I wanted something different, and was also curious as to how it was going to be crafted, since these are all hand made. Why the pouch, you ask? Well I just think they look great. While not the most practical of cases maybe, as you have to take the device out each and every time you want to use it, and you can't use the always on display, I just think it looks elegant. Going out for the night? Throw this case on. I've found it to be great since you're not distracted when any notifications come in, and when you put it on a table, it just looks elegant like most other phone cases simply do not. I'm not a big fan of plastic cases because they make the device look cheap. Think about it, you buy a phone for nearly $800, then you put a $5 plastic case on it, which just looks terrible. In my opinion, it totally takes away from the phones metal and glass construction. Also with the S7 Edge, I love the way it feels in the hand naked, and with this case you always have that experience.
As always, this case from Noreve is also exceptionally well made. It took a few weeks for it to arrive, since they only start making them once you order one, and depending on the finish, it can take longer or shorter. But normally it's about two weeks, which is perfectly fine for a custom made, leather case.
Unboxing a Noreve case is always an event. It comes in a very handsome red box, which is sealed by plastic wrap. Inside the box, you'll find a protective red pouch for your case - this is a very nice touch, and I love that they do this, when they really don't have to. But the devil is in the details. Inside the pouch, you'll find your case - and the first thing that you'll probably notice is the brilliant smell of genuine leather. It just adds something to the overall experience that I enjoy.
The case is made exceptionally well. Noreve cases have always been constructed with very high attention to detail, but I believe it's even higher now as there are no flaws with the case whatsoever. Because this is a pouch style case, there are no cut outs for the camera, power or volume rocker buttons. None for the micro USB or headphone jack, either. The only cut outs are for the speakers on the bottom. I think this is perfectly fine, and whenever I wanted to charge the phone or plug in some headphones, I'd just reverse the phone and put it into the pouch in reverse. I found this to be a practical and easy solution.
In conclusion, I am pretty much blown away by this company yet again. Never received a bad case from them, they only seem to get better. Mine is in the Ambition (grained leather) finish, but Norever offer a whole bunch of different finishes which you can also then customize. Basically, the sky is the limit. These guys can do whatever you want. They're a bit on the pricey side (my case was $45.40 - free shipping with DHL) but as we all know, you get what you pay for. This is not one of those Chinese made, fake leather cases which will rip and tear after a few months. Hell, I'm still using the one I have for my Galaxy Nexus, which should say something.
Here are some pictures below of this beauty. Thank you all for reading, and here's a link to their product page.
Cheers.
Can you elaborate on the inner material? How screen friendly is it?
Sent from my SM-G935F using Tapatalk
antisp1n said:
Can you elaborate on the inner material? How screen friendly is it?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
The inner material is also leather, but more of a matte leather with the company logo branded into it. I'll try to get a picture up for you, but I haven't had any problems with it scratching the screen.
Laventura said:
looks good , where can you get it ? u.S ?
Click to expand...
Click to collapse
You can just order online from their site here, I believe they have worldwide free shipping with DHL.
Honestly to me that looks like a recipe for disaster. If anything like a grain of sand gets in it, you are running the screen down the inside material and it could scratch it.
Chilinmichael said:
Honestly to me that looks like a recipe for disaster. If anything like a grain of sand gets in it, you are running the screen down the inside material and it could scratch it.
Click to expand...
Click to collapse
Depends on where you live and what you do I guess. Last time I was in contact with actual sand was like 4 years ago.
Nice review and beautiful pictures.
Great review and photos, but it's not for me personally.
Sent from my SM-G935F using XDA-Developers mobile app
Chris_c81 said:
Great review and photos, but it's not for me personally.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Cheers, thanks for reading. Just want to provide options :good:

Categories

Resources