Hey everyone, I recently bought an OTG cable off amazon along with a ps2 controller to USB adapter. Well, while waiting for my ps2 adapter to come in(OTG is already in my possession), I wanted a temporary solution.
I used to mod original xbox's and even make adapters to convert controllers to USB(Original xbox uses USB, just different shaped ports). Well, on windows you have to download special drivers that you have to find yourself due to your computer not being able to automatically install the controller. So, I figured the controller would be the same way on Android.
Well, I was wrong. what you do is strip an xbox controller's cable, or the break away cable(this is smarter due to the fact you can still use your controller later with another break away cable), and strip a usb cable (the male end still in tact) and simply wire the corresponding colors together(Green to green, red to red, black to black, white to white). Now the xbox controller has a 5th wire which is yellow, you can ignore that one.
So far this controller has been a good temporary solution for my wait. The L & R triggers don't work, but im not sure if that's an android issue or my controller just funked. Anyways if anyone has a spare xbox controller laying around and about 10-20 minutes of spare time, give this trick a go! Would love to see other people's results!
Games tested on:
GTA III
Modern Combat 3
Dead Trigger
Dslrocks10 said:
Hey everyone, I recently bought an OTG cable off amazon along with a ps2 controller to USB adapter. Well, while waiting for my ps2 adapter to come in(OTG is already in my possession), I wanted a temporary solution.
I used to mod original xbox's and even make adapters to convert controllers to USB(Original xbox uses USB, just different shaped ports). Well, on windows you have to download special drivers that you have to find yourself due to your computer not being able to automatically install the controller. So, I figured the controller would be the same way on Android.
Well, I was wrong. what you do is strip an xbox controller's cable, or the break away cable(this is smarter due to the fact you can still use your controller later with another break away cable), and strip a usb cable (the male end still in tact) and simply wire the corresponding colors together(Green to green, red to red, black to black, white to white). Now the xbox controller has a 5th wire which is yellow, you can ignore that one.
So far this controller has been a good temporary solution for my wait. The L & R triggers don't work, but im not sure if that's an android issue or my controller just funked. Anyways if anyone has a spare xbox controller laying around and about 10-20 minutes of spare time, give this trick a go! Would love to see other people's results!
Games tested on:
GTA III
Modern Combat 3
Dead Trigger
Click to expand...
Click to collapse
I may try this.. Just curious, what did you snip to use as the male USB part?
opz187 said:
I may try this.. Just curious, what did you snip to use as the male USB part?
Click to expand...
Click to collapse
A spare mini usb cable but any should work as long as it's a data cable,
Sent from my Nexus 7 using Tapatalk HD
Dslrocks10 said:
Hey everyone, I recently bought an OTG cable off amazon along with a ps2 controller to USB adapter. Well, while waiting for my ps2 adapter to come in(OTG is already in my possession), I wanted a temporary solution.
I used to mod original xbox's and even make adapters to convert controllers to USB(Original xbox uses USB, just different shaped ports). Well, on windows you have to download special drivers that you have to find yourself due to your computer not being able to automatically install the controller. So, I figured the controller would be the same way on Android.
Well, I was wrong. what you do is strip an xbox controller's cable, or the break away cable(this is smarter due to the fact you can still use your controller later with another break away cable), and strip a usb cable (the male end still in tact) and simply wire the corresponding colors together(Green to green, red to red, black to black, white to white). Now the xbox controller has a 5th wire which is yellow, you can ignore that one.
So far this controller has been a good temporary solution for my wait. The L & R triggers don't work, but im not sure if that's an android issue or my controller just funked. Anyways if anyone has a spare xbox controller laying around and about 10-20 minutes of spare time, give this trick a go! Would love to see other people's results!
Games tested on:
GTA III
Modern Combat 3
Dead Trigger
Click to expand...
Click to collapse
Well I already have a XBOX to USB adapter, I guess that would save me the stripping right? (I'm at work, cant test it myself yet)
Anyone try this with ICS?
silcharde said:
Well I already have a XBOX to USB adapter, I guess that would save me the stripping right? (I'm at work, cant test it myself yet)
Click to expand...
Click to collapse
Yup!
sega dude said:
Anyone try this with ICS?
Click to expand...
Click to collapse
It should work! If my Evo 3D had otg compatibilities I'd try it but it should work.
Sent from my Nexus 7 using Tapatalk HD
I too have an xbox to USB adapter from the old Xbox modding days. Plugged into my OT G adapter for the note 2 tonight, and no love on riptide GP or dead trigger.
is there anywhere where you can check to see if the Android is even detecting it?
do you need to help 6 axis controller or something installed?
Would this work on for the Motola Atrix Lapdock's full USB port? That would be pretty sick...
well i always wanted to know whether this would work but never tried it, i have a xbox controller that i did the usb mod with and a asus transformer tf101 with 2xUSB host and a SGS3 with otg adapter. but when i made the transistion from windows 7 gaming to windows 8 i later realised the driver would never be supported, so i was left with windows 8 games all installed and ready but no controller to play them with. so i bought an official xbox360 wired controller new off ebay, i knew it would work with android if i needed it to but it is perfect for me and my pc. btw the windows 7 driver for xbox controller is called XBCD and works well with x360 button mapping software.
This sounds pretty awesome. I modded the break away cable on one of my original Xbox controllers years ago so I could use it as a PC controller because I had extras. Now I just need to get an OTG cable.:cyclops:
I used this tutorial to mod my Xbox 1 controller a few days before: http://www.ocmodshop.com/how-to-use-an-xbox-controller-as-a-usb-pc-gamepad/
It works perfekt with my i9305 including the L & R triggers if you build you own driver with USB/BT Joystick Center 6: https://play.google.com/store/apps/details?id=com.poke64738.usbjoy
You also can copy my config file to your folder USBJoyData and import it with USB/BT Joystick Center 6: http://dl.dropbox.com/u/56411924/Xboxcontroller/Xbox1Controller_JoyPrefsFile_1118_645_0.zip
Tested with: Shadowgun
Using an original Xbox controller with USB adapter to OTG cable. GTA 3 doesn't work for me, sadly. I just get camera spin and some buttons do odd things.
Sent from my Nexus 7
Telemachus said:
I too have an xbox to USB adapter from the old Xbox modding days. Plugged into my OT G adapter for the note 2 tonight, and no love on riptide GP or dead trigger.
is there anywhere where you can check to see if the Android is even detecting it?
do you need to help 6 axis controller or something installed?
Click to expand...
Click to collapse
You shouldn't need any third party software installed. As long as your devices supports usb hosting it should work. What Os version are you on?
jeffreygtab said:
Would this work on for the Motola Atrix Lapdock's full USB port? That would be pretty sick...
Click to expand...
Click to collapse
It should work! What Os version are you running?
Sent from my Nexus 7 using Tapatalk HD
WAAITTT!!
Stop! I got an idea: buy a extension cable instead of doing it with the original breakawy if you want to use it on the xbox again... something like this
I dont know if someone pointed tha out yet, I dont have time to read it now...
Brigaid said:
Using an original Xbox controller with USB adapter to OTG cable. GTA 3 doesn't work for me, sadly. I just get camera spin and some buttons do odd things
Click to expand...
Click to collapse
That's normal. All you need to do is install USB/BT Joystick Center 6 and map the buttons to your needs. It also works perfectly on my rooted Galaxy Nexus
360porcento said:
Stop! I got an idea: buy a extension cable instead of doing it with the original breakawy if you want to use it on the xbox again... something like this
I dont know if someone pointed tha out yet, I dont have time to read it now...
Click to expand...
Click to collapse
Why? Use this tut and you have both: http://www.ocmodshop.com/how-to-use-an-xbox-controller-as-a-usb-pc-gamepad/
Would this work on other phones such as sony xperia p
Simple question, but you are using the micro-usb slot right? Is it possible to charge and connect a controller at the same time?
Because well, I can't play games for any longer then 2hours, then my battery is dead.
Mr_Jongenelen said:
Simple question, but you are using the micro-usb slot right? Is it possible to charge and connect a controller at the same time?
Because well, I can't play games for any longer then 2hours, then my battery is dead.
Click to expand...
Click to collapse
There is a y cable I believe that can help you achieve this. I don't have the link or anything though
muzab a said:
Would this work on other phones such as sony xperia p
Click to expand...
Click to collapse
As long as it supports otg!
Sent from my Nexus 7 using Tapatalk HD
Mr_Jongenelen said:
Simple question, but you are using the micro-usb slot right? Is it possible to charge and connect a controller at the same time?
Because well, I can't play games for any longer then 2hours, then my battery is dead.
Click to expand...
Click to collapse
Charging with otg is kernal specific. If you have a usb extender cable, cut it where you want the charging port to be and solder in a 'y' with a male end. Only red and black need be connected. Leave green and white alone for the charging plug in.
Plug power in first, then the controller, then attach to your device.
I made one to use thumb drive and charge while traveling.
Works great on galaxy s3 with lean kernal.
More about nexus 7 here:http://forum.xda-developers.com/showthread.php?t=1934722
Related
Saw this on Reddit
http://www.reddit.com/r/Android/comments/kcphf/full_xbox_360_controller_support_app_triggers_and/
AND N64 Controller adapters exist?! I'm in ecstasy right now..
Does the XOOM need the OTG cable to make this work?
I'm curious to know if this works for the Xoom. I'd assume that OTG cable is required.
great find!
BlazinGTI said:
Saw this on Reddit
http://www.reddit.com/r/Android/comments/kcphf/full_xbox_360_controller_support_app_triggers_and/
AND N64 Controller adapters exist?! I'm in ecstasy right now..
Does the XOOM need the OTG cable to make this work?
Click to expand...
Click to collapse
Yes it would need an otg cable i had my 360 wireless controller working on mine without any program however, if i tried to use 2 wireless controllers it kinda confused the emulator and both controllers moved both players so im assuming this app would fix that.
Anyone have issues purchasing app?
Anyone have issues purchasing app? Mine errors and says contact Google or "pending", but will not bill me or allow download.
So, has anyone given this a try yet? I've ordered all the accessories (HDMI cable, Xbox Adapter, Angled OTG Cable) all I've got left is to purchase the app itself.
I'd love to hear from anyone that's tried it.
I'll be sure to update!
well the app is gone from the play store
any one has any idea on how to get multiple wireless xbox controllers to work with an android device?
Hi everyone.
I'm about to buy a powered USB hub with 4 ports... it's a hub that draws its own power from a wall socket, so it doesn't have to draw current from the Galaxy Note.
Would it work? I'd connect it to the note via an USB OTG cable, and plug it in a wall socket... then connect my A4Tech mouse and flexible keyboard (both wired, of course) to it... It should work, right?
For what it's worth, the USB Hub I'm going to buy is this one. Not really famous . Oh yeah, the page is in Romanian language...
Just did a google search and found these.. Link, and link 2
So i think it should work..
ravi_buz said:
Just did a google search and found these.. Link, and link 2
So i think it should work..
Click to expand...
Click to collapse
Saw that video... was surprised to see an external storage device works in parallel with a wireless mouse receiver! Didn't know the latter would even be supported!
Oh well, I've seen people saying that the S2 provides a bit more power through OTG... hence it would work with multiple devices.
Guess I'll see for myself tomorrow... will get a chance to test the hub before I buy it. Fingers crossed . I'm one step closer to turning my phone into a real computer, haha .
If it draws power from the wall socket it means that your portable hard drives should work as well.
little-vince said:
If it draws power from the wall socket it means that your portable hard drives should work as well.
Click to expand...
Click to collapse
No matter the hub... It just needs additional separate power. Okay
Scribbled from my Note coupled with the best (CleaNote) ROM and (NoteCore) kernel by g.lewarne
Let's keep our fingers crossed. Please let us know if it works.
Good Luck!!
Did it work?
Sent from my GT-N7000 using XDA Premium HD app
Alright, so I bought an USB OTG cable and the above mentioned USB hub.
The USB hub has one mini-USB port, one 5V power supply port, and 4 different USB 2.0 ports.
I have a lot of Nokia chargers... neither fit in the 5V power supply port!
So... since I don't own a USB 2.0 A-A cable, I cannot connect the hub to a mini-USB charger and the OTG cable at the same time.
I figured I could use a USB 2.0 A-A cable to connect the OTG cable to one of the 4 ports of the Hub, while it is drawing current from a mini-USB charger, but... I don't have such a cable.
I'll return the USB hub tomorrow.
I found a PlayStation 3 bluetooth keyboard which also has a mouse (tiny track"ball") and I think I'm going to buy that...
I wish there were USB hubs with their own power adapters / chargers on the market... that would NOT cost $100 .
Yup. I'm done.
I returned the USB Hub, and I sold the USB OTG cable to a friend (instead of returning it to the seller, who would probably be stunned by the fact that I'd have wanted to return such a simple thing, lol).
I guess I'm done with these sorts of things, at least for the time being.
Instead of hooking up a mouse & keyboard with insanely long wires and get entangled in them and choke myself to death... (if I get to make it work)... I'll rather buy a $30 PS3 bluetooth keyboard with a mouse track"ball".
Oh well...
Formhault said:
Instead of hooking up a mouse & keyboard with insanely long wires and get entangled in them and choke myself to death... (if I get to make it work)... I'll rather buy a $30 PS3 bluetooth keyboard with a mouse track"ball".
Click to expand...
Click to collapse
Why didn't you consider doing that to begin with? XD
little-vince said:
Why didn't you consider doing that to begin with? XD
Click to expand...
Click to collapse
Just didn't thought I could find such things... for this cheap
I have everything planed out for my tab install for my Dodge Magnum. But since the Nexus 7 doesnt have a sd slot I need to find a cable that can charge the tablet and use my flash drive at same time.
My flash drive(Usb on dash, so its easily removable)
http://www.amazon.com/gp/product/B00812F7O8/ref=ox_sc_act_title_4?ie=UTF8&smid=ATVPDKIKX0DER
Plugging this into the usb otg cable
http://www.amazon.com/Black-4-Port-...qid=1348442221&sr=8-3&keywords=4+port+usb+hub
I would love host cable with 2 usb inputs but cant seem to find it and dont know if its even possible.
Any help would be appreciated.
I found this on the bay : item # 140839631580 (Can't post link I'm too new... I was a lurker for a while -_-)
i didn't think the N7 could support power and OTG
You want it for video or audio? You could try a wifi solution for audio. Or be the guy that gets the pins to work.
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
I have no clue what im doing but this is what im playing with at the moment. Its a old dock for sgs2 i believe but it has a dc and usb input on the back of it.
Im about to this because i have very little patience for china.
http://www.amazon.com/gp/product/B008CQKM2U/ref=ox_sc_act_title_1?ie=UTF8&smid=A24Y22QERZZ9SS
Would get the cheaper one but the juiced one has a flexible cable vs the fixed usb on the other one. Would this be pointless though?
Unfortunately OTG sends ground up the sense pin to trigger host mode. Once activated it sends 5V DOWN the USB cable to power your USB devices. Trying to send voltage up the cable at the same time to the Nexus would not be a good idea. The only way around it I can think of would be to hack the firmware to only activate the data pins in host mode and keep the power circuit seperate, then you could power the USB device from a modified dock/hub which sends power up the USB cable to the device.
A lot of work, and without the powered hub, OTG would be useless!
In the long run wouldn't it be easier to just plug in the power lead when needed and have the otg in the rest of the time? (or vice versa). It would mean you having to have easy access to the usb port but I can't see an easy non technical solution to connecting both at once.
Don't use the Nexus 7 for a car install. You can get an Acer Iconia A100 with a full-size USB port to connect to whatever external storage solution you want, and it's usually about the same price or cheaper than the Nexus 7.
earlyberd said:
Don't use the Nexus 7 for a car install. You can get an Acer Iconia A100 with a full-size USB port to connect to whatever external storage solution you want, and it's usually about the same price or cheaper than the Nexus 7.
Click to expand...
Click to collapse
Trying to sell tablet now. Going for galaxy tab 2
Sent from my SAMSUNG-SGH-I747 using xda premium
Wouldn't this work?
http://tobuygoods.com/product_info.php?language=en¤cy=USD&products_id=131
I have galaxy tab 2 for sale. Pm me for details...
erica_renee said:
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
Click to expand...
Click to collapse
Would it be possible to charge while using an OTG Cable for Keyboard/Mouse or does the same principle apply as inn data via OTG & charge?
Roland
Sent from my Nexus 7 using Tapatalk 2
Rolandh said:
Would it be possible to charge while using an OTG Cable for Keyboard/Mouse or does the same principle apply as inn data via OTG & charge?
Roland
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Same principle. In normal OTG host mode the tablet powers the peripherals. A USB keyboard/mouse will be no exception to that.
intruda119 said:
I have no clue what im doing but this is what im playing with at the moment. Its a old dock for sgs2 i believe but it has a dc and usb input on the back of it.
Im about to this because i have very little patience for china.
http://www.amazon.com/gp/product/B008CQKM2U/ref=ox_sc_act_title_1?ie=UTF8&smid=A24Y22QERZZ9SS
Would get the cheaper one but the juiced one has a flexible cable vs the fixed usb on the other one. Would this be pointless though?
Click to expand...
Click to collapse
Sorry to resurrect an old thread but was wondering if you ever ended up getting that Juiced systems adapter and if it worked well with the N7. Been looking at it but haven't found any success stories on XDA with the N7, just the few Amazon reviews...
That cable would work but u need specific kernel tweaks for otg + charge to work. Pm me if anyone needs it.
Sent from my Nexus 7 using xda app-developers app
sadde said:
That cable would work but u need specific kernel tweaks for otg + charge to work. Pm me if anyone needs it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Why PM you, why not just put it up here, Anyway here you guys go
http://forum.xda-developers.com/showthread.php?t=1835720
I am interested in this kernel patch quite a bit. I have a galaxy note 2 (sprint version). What are the odds someone has figured out how to get power and otg working on the note 2?
erica_renee said:
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
Click to expand...
Click to collapse
Ofcourse there is charge and otg at the same time by just simply shorting pins 4 and 5 with a resistor,in my case for xperia p , a 100k resistor does it.
Timurs USB ROM from another site is what you want. Has links and everything you need.
I was going to do a car install as well but after sourceing parts and work estimates ( I want clean install, like stock) just more hassle than its worth for me. Please post pics if you get an install going.
Sent from my Nexus 7 using XDA Premium HD app
Has anyone tried this accessory with the GN2? Looks pretty useful, just want to make sure it works without rooting.
amazon . com/Samsung-S2-Multi-functional-Connection-Kit/dp/B006MJZOMW/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353387405&sr=1-2&keywords=Micro+USB+OTG
I have one and it works great. I've only used it for transferring in photos from my digicam and some files from a few thumbdrives, but it's worked perfectly thus far.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
benchi86 said:
Has anyone tried this accessory with the GN2? Looks pretty useful, just want to make sure it works without rooting.
amazon.com/Samsung-S2-Multi-functional-Connection-Kit/dp/B006MJZOMW/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353387405&sr=1-2&keywords=Micro+USB+OTG
Click to expand...
Click to collapse
I have one. No need to root as stock OTG support is fine, but will not read NTFS.
There are a couple issues I have with it used with Note2:
- it will not act as a dock... it will not charge your phone while it powers memory or USB devices.
- it cannot be used with a case, unless you also buy an extension cable... M/F micro USB
- mine feels a little weak, like it might break off in the micro USB port & is intermittent if moved.
It's easier & cheaper to use a OTG cable unless you need to power USB devices... then you could add a hub. If you use a smart dock, you get charging, 3x USB, audio, HDMI.
For the cost, it would have been nice to have it charge as stated for S2.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Thanks for the very helpful info!
benchi86 said:
Has anyone tried this accessory with the GN2? Looks pretty useful, just want to make sure it works without rooting.
amazon . com/Samsung-S2-Multi-functional-Connection-Kit/dp/B006MJZOMW/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353387405&sr=1-2&keywords=Micro+USB+OTG
Click to expand...
Click to collapse
Bought it for use with my Galaxy Note and now use it for my Galaxy Note 2.
Works great (yeah, not with a case on unless you have an extension cable), have used it with SD cards, Keyboard, mouse (yup, puts a mouse pointer on your screen!), external hard drive (but you have to plug in power (usb or wall charger) for that), I have even plugged in my Creative USB headphones and they work great! Awesome device.
If I was to make it, I would put a little sturdier plug on it (see other post for "flimsy feel") and make it so it had a VERY short plug (like a 1/4 inch longer) so it could be used without popping the bottom out of my TPU case).
If someone has a link to a SHORT m-f micro usb extender, SHARE please !!
:good:
rrackman said:
Bought it for use with my Galaxy Note and now use it for my Galaxy Note 2.
Works great (yeah, not with a case on unless you have an extension cable), have used it with SD cards, Keyboard, mouse (yup, puts a mouse pointer on your screen!), external hard drive (but you have to plug in power (usb or wall charger) for that), I have even plugged in my Creative USB headphones and they work great! Awesome device.
If I was to make it, I would put a little sturdier plug on it (see other post for "flimsy feel") and make it so it had a VERY short plug (like a 1/4 inch longer) so it could be used without popping the bottom out of my TPU case).
If someone has a link to a SHORT m-f micro usb extender, SHARE please !!
:good:
Click to expand...
Click to collapse
http://www.amazon.com/Juiced-Systems-MHL-Adapter-MicroSDHC/dp/B008CQKM2U/ref=wl_it_dp_o_pC_nS_nC
HDMI added, and the short extender you want.
Did anyone tried the version with the hdmi?If it works,it could be a good alternative to official smart dock (100$)
It seems that it doesn't charge the note, as per the reviews, when the usb host is used.
I want something that charges it, to use it in the car, sending video to my headrest screens FROM a USB thumb drive. So I'd need USB+HDMI out, plus charging. That would be great to have. But only playing videos from USB drive WHILE CHARGING it would be enough for me. Although there are dongles for the Note 2 that would allow HDMI+Charging, there is nothing AT ALL in the market that would allow USB HOST+Charging capabities. Not an Android phone, not a tablet (other than Toshiba/Acer with USB ports on the side).
johnko1 said:
Did anyone tried the version with the hdmi?If it works,it could be a good alternative to official smart dock (100$)
Click to expand...
Click to collapse
I think MHL will not work because the 11 pin vs 5 pin connector we have like the Galaxy S3
Found this comment on amazon:
This thing is magic! All of these different ports in one simple accessory is brilliant! They don't claim that MHL on this unit works with the Samsung Galaxy S3 and sure enough MHL does not. Everything else does though. Having all of these ports on one small accessory makes the most of any compatible smart phone.
Click to expand...
Click to collapse
But if you also use a Micro USB 5 Pin To 11 Pin (4$ from ebay) I guess it would work
SyCoQC said:
But if you also use a Micro USB 5 Pin To 11 Pin (4$ from ebay) I guess it would work
Click to expand...
Click to collapse
Yes, I'd think so. Still curious about using the USB host while charging.
---------- Post added at 10:52 AM ---------- Previous post was at 10:33 AM ----------
RipplingHurst said:
Yes, I'd think so. Still curious about using the USB host while charging.
Click to expand...
Click to collapse
Maybe not, from the Amazon reviews:
cannot charge and use usb device at the same time.
plug in charger and usb device is disabled.
fails on nexus 7 and galaxy note.
Click to expand...
Click to collapse
Chances that it would work on the Note 2 are slim I fear.
Anyway I will probably get the older version with the card reader and usb port,it is more portable!
http://www.amazon.com/Samsung-S2-Mu...qid=1354305907&sr=1-2&keywords=Juiced+Systems
and when the official smart dock will get cheaper,I will buy it for sure
Found this on amazon for the Vivo tab, which uses the same 36-pin connector as the TF701. So I bought it for $20US hoping it would work with the 701 and it does! Plugged in the OTG adapter and attached my sandisk extreme usb 3 thumbdrive. Used the included SD/uSD card adapter to connect a couple SD cards and had no problems. Didn't do any speed tests or anything, just wanted to make sure they worked, and they did.
ASUS Extension Kit for VivoTab-Series Tablets
Aaroneious said:
Found this on amazon for the Vivo tab, which uses the same 36-pin connector as the TF701. So I bought it for $20US hoping it would work with the 701 and it does! Plugged in the OTG adapter and attached my sandisk extreme usb 3 thumbdrive. Used the included SD/uSD card adapter to connect a couple SD cards and had no problems. Didn't do any speed tests or anything, just wanted to make sure they worked, and they did.
ASUS Extension Kit for VivoTab-Series Tablets
Click to expand...
Click to collapse
Wow... Great find!
Hey - happen to have a PS3 controller you could test with? Almost bought the dock purely for this purpose, so I'm dying to know if plugging a controller in through USB would work...
If this really is fully supported by the tf701t, I'm seriously questioning why they didn't say so?
Sent from my K00C using Tapatalk
Trevor_g said:
Wow... Great find!
Hey - happen to have a PS3 controller you could test with? Almost bought the dock purely for this purpose, so I'm dying to know if plugging a controller in through USB would work...
If this really is fully supported by the tf701t, I'm seriously questioning why they didn't say so?
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Sorry, no, I don't have a PS3 controller.
Aaroneious said:
Sorry, no, I don't have a PS3 controller.
Click to expand...
Click to collapse
No problem. There is another way to find out. Do you have a USB mouse and/or keyboard handy? If you wouldn't mind testing these basic peripherals, we could really verify if this thing provides host mode for more than disk drives.
If so, I'm buying!
Sent from my K00C using Tapatalk
Trevor_g said:
No problem. There is another way to find out. Do you have a USB mouse and/or keyboard handy? If you wouldn't mind testing these basic peripherals, we could really verify if this thing provides host mode for more than disk drives.
If so, I'm buying!
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Standard mouse and keyboard both work fine when plugged into the OTG adapter.
Shocking. Why in the world would Asus not bother marketing this toward the TF community too?!
Glad you found this. Thanks for sharing and testing... Off to buy!
Sent from my K00C using Tapatalk
In 4 one. 9 left in stock. Now all I need is an extra usb cable. Can anyone point me to one?
Sent from my SCH-I545 using Tapatalk
guho said:
In 4 one. 9 left in stock. Now all I need is an extra usb cable. Can anyone point me to one?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Yeah I just want the extra cable - assume any vivo tab one works?
OTG USB adapter
I have ordered one too. Thanks for the link. :cyclops:
OTG USB Adapter
That's good idea, but unfortunately I can't buy this thing. There are blutooth usb-hub, for example _ttp://usb.brando.com/prod_detail.php?prod_id=00142
Will it work?
can someone find me the right product on the german amazon site? or uk?
i cant find
Can you charge and use USB with this?
Nice
Finaly, i recieved my OTG USB adapter today, and it works perfectly.
Thanks for the link.
or you can just buy the one meant for the transformer and it's a few dollars cheaper if you can't get the other one. Just doesn't come with the SD card adapter. This is the one that I intend to buy once I get my tablet
evodev said:
or you can just buy the one meant for the transformer and it's a few dollars cheaper if you can't get the other one. Just doesn't come with the SD card adapter. This is the one that I intend to buy once I get my tablet
Click to expand...
Click to collapse
Warning: This will not work with our TF701!!!!!! Read the Q&A below the product description !!
should the one for the tf700t also work?
The adapters mentioned that work with the 701 are all usb-2.
Does anyone know of a usb-3 adapter that will work?
matthelm said:
Can you charge and use USB with this?
Click to expand...
Click to collapse
I'm considering getting a TF701T, does anyone know if you could use this to charge the device? It'd be nice to know I have a backup if the proprietary USB cable fails.
nop- said:
I'm considering getting a TF701T, does anyone know if you could use this to charge the device? It'd be nice to know I have a backup if the proprietary USB cable fails.
Click to expand...
Click to collapse
Also can you simultaneously power the device and provide input using a usb hub(plug in keyboard and mouse for example)?
I went to the computer store. Bought the following:
The adapter which is 2.0 by the way.
USB 3.0 HUB with Power Adaper.
A male to A male cable.
While connected to a the HUB, and while the device is on its says "NOT CHARGING". I turn it off(tablet), Not getting a charge while connected to a the hub. It also drained it while the tablet is off. Nevermind the hub for power.
NO CHARGE FROM HUB
While connected to the PC it drained the power down to 6% then went back up to 50%. Not sure about that because it seemed to charge while it was off.
NO CHARGE FROM PC
As for the power adapter that comes with the tablet to it. Not charging while ON. Turn it off and no charge.
NO CHARGE FROM ASUS POWER ADAPTER
SO no it doesnt charge in any practical sense from this VIVO adapter as far as i can tell. Maybe its the MALE to MALE cable. I dont know. But its not worth trying if there a chance of drain killing it.
Unfortunately from the adapter there is no media connection or usb debugging to pc or usb hub afiak.
NO MEDIA CONNECTION OR USB DEBUGGING
The good news is that the device can connect to the USB HUB and the keyboard , mouse and thumb drive work flawlessly together.