Related
Guys I am trying to update the device from original ROM to official OTA ICS 4.0 with sense 3.6
I've downloaded the ROM successfully, but when the device restarted to to install the update it shows the bootloader menu !
my device is s-on with recovery installed.
SOMEONE HELP ME !
micho119 said:
Guys I am trying to update the device from original ROM to official OTA ICS 4.0 with sense 3.6
I've downloaded the ROM successfully, but when the device restarted to to install the update it shows the bootloader menu !
my device is s-on with recovery installed.
SOMEONE HELP ME !
Click to expand...
Click to collapse
I think i read your post regarding the same yesterday.
you did not that you have a custom recovery installed...
in this case you will not be able to flash the ruu as you are required to be stock with s-on
head over to arhd thread to get the closest experience to the stock rom.
download the arhd rom, flash in recovery
letmedanz said:
I think i read your post regarding the same yesterday.
you did not that you have a custom recovery installed...
in this case you will not be able to flash the ruu as you are required to be stock with s-on
head over to arhd thread to get the closest experience to the stock rom.
download the arhd rom, flash in recovery
Click to expand...
Click to collapse
But I remember that I've did this before and reinstalled a stock ROM using RUU exe file, can't I do this now?
Does WWE ROM have Arabic language?
I am very depressed because of this problem, I want to have official HTC ICS ROM.
micho119 said:
But I remember that I've did this before and reinstalled a stock ROM using RUU exe file, can't I do this now?
Does WWE ROM have Arabic language?
I am very depressed because of this problem, I want to have official HTC ICS ROM.
Click to expand...
Click to collapse
In order to install the ICS OTA after it has been downloaded, you will need to restore the stock HTC recovery and then relock your bootloader.
tpbklake said:
In order to install the ICS OTA after it has been downloaded, you will need to restore the stock HTC recovery and then relock your bootloader.
Click to expand...
Click to collapse
thanks tpbklake, i could relock the bootloader but I don't know how to have the HTC Recovery back instead of the current one, any guide to do this?
am quoting tpbklake here, listen to him, he's the best around here
Grab a RUU and extract the recovery.img file from the ROM.zip. Then flash the recovery image in FASTBOOT USB mode using
fastboot flash recovery recovery.img
micho119 said:
thanks tpbklake, i could relock the bootloader but I don't know how to have the HTC Recovery back instead of the current one, any guide to do this?
Click to expand...
Click to collapse
Extract it from an official RUU/ROM.zip file and then flash it in FASTBOOT USB mode using the following command:
fastboot flash recovery [path to recovery.img]
micho119 said:
thanks tpbklake, i could relock the bootloader but I don't know how to have the HTC Recovery back instead of the current one, any guide to do this?
Click to expand...
Click to collapse
tpbklake said:
Extract it from an official RUU/ROM.zip file and then flash it in FASTBOOT USB mode using the following command:
fastboot flash recovery [path to recovery.img]
Click to expand...
Click to collapse
LOL. beat you to it
tpbklake said:
Extract it from an official RUU/ROM.zip file and then flash it in FASTBOOT USB mode using the following command:
fastboot flash recovery [path to recovery.img]
Click to expand...
Click to collapse
can't thank you enough man !, can you do me a final favor and send me a zip file with the recovery img? or at least give me a link to original rom because I am completely lost?
Thanks again mate.
micho119 said:
can't thank you enough man !, can you do me a final favor and send me a zip file with the recovery img? or at least give me a link to original rom because I am completely lost?
Thanks again mate.
Click to expand...
Click to collapse
Try the attached file in this post
http://forum.xda-developers.com/showpost.php?p=25088846&postcount=4
tpbklake said:
Try the attached file in this post
http://forum.xda-developers.com/showpost.php?p=25088846&postcount=4
Click to expand...
Click to collapse
when i am trying to flash anything it gives me the message
<bootloader> signature checking...
FAILED (remote: signature verify fail)
any idea on this?
micho119 said:
when i am trying to flash anything it gives me the message
<bootloader> signature checking...
FAILED (remote: signature verify fail)
any idea on this?
Click to expand...
Click to collapse
Did you already relock the bootloader? You need to flash the stock recovery first, then relock the bootloader.
Did you extract the recovery.img file from the PG32IMG.zip file or are you just trying to have the bootloader flash the PG32IMG.zip?
The signature checking failure leads me to believe that the bootloader is locked/relocked.
tpbklake said:
Did you already relock the bootloader? You need to flash the stock recovery first, then relock the bootloader.
Did you extract the recovery.img file from the PG32IMG.zip file or are you just trying to have the bootloader flash the PG32IMG.zip?
The signature checking failure leads me to believe that the bootloader is locked/relocked.
Click to expand...
Click to collapse
I've flashed the recovery, relock the bootloader using fastboot oem lock, downloaded the update OTA, when it turns off the bootloader screen is showing up without continuing the update !!, any advice?
micho119 said:
I've flashed the recovery, relock the bootloader using fastboot oem lock, downloaded the update OTA, when it turns off the bootloader screen is showing up without continuing the update !!, any advice?
Click to expand...
Click to collapse
Did it update the bootloader to 2.02.0002 or is it still 2.00.0000?
tpbklake said:
Did it update the bootloader to 2.02.0002 or is it still 2.00.0000?
Click to expand...
Click to collapse
Still 2.00.0000
micho119 said:
Still 2.00.0000
Click to expand...
Click to collapse
So there was no indication on the HBOOT screen to press the Volume Up to apply the update or anything like that?
no, nothing at all like this !
micho119 said:
no, nothing at all like this !
Click to expand...
Click to collapse
How did you end up flashing the recovery? Did you use the PG32IMG.zip and copy it to your sd card or did you extract the recovery.img file and manually flash it?
If you used the PG32IMG.zip file then that probably changed the mainver value and that's why the OTA is not running.
Well guess what, my device is now crashed !, it is stock at the green HTC logo, I can not access anything except for the bootloader !.
i've installed the Android Revolution HD but it didn't work as well, my device is now in mess.
micho119 said:
Well guess what, my device is now crashed !, it is stock at the green HTC logo, I can not access anything except for the bootloader !.
i've installed the Android Revolution HD but it didn't work as well, my device is now in mess.
Click to expand...
Click to collapse
You never did answer my question about how you flashed the HTC stock recovery.
Anyway, If you unlocked your bootloader and reinstalled a custom Recovery and then attempted to install ARHD, did you manually extract and flash the boot.img file in FASTBOOT USB mode?
That may be all you need to do to get the phone booted.
Hey guys, I'm about to cry :crying: - hope somebody knows a fix :highfive:
To keep it short, what I've done:
Unlocked my bootloader and installed CWM Recovery.
Everything worked.
Then... lastly I wanted to remove the "Bootloader Unlocked message/image"... and flashed a different logo using following this guide http://forum.xda-developers.com/showthread.php?t=1980139 (which was not intended for the XT890 and JB - rolleyes)
Code:
fastboot flash logo [path to the logo.bin i downloaded]
and it returned
Code:
[B]"None signed image detected. Fastboot command failed.[/B]
Now my XT890 JB 4.1.2 EU stays at the "Bootloader Unlocked Screen" when i try to boot (choosing Recovery, Factory etc from AP).
I'm - as you probably can tell already - NOT an expert, but my hope is: I can "fix" it by flashing the logo again with the original/or compatible logo.bin. (incase this should be possible please provide me with a link to it)
Thanks in advance for any input.
Everything works again
I downloaded the proper stock firmware from here http://forum.xda-developers.com/showthread.php?t=2239706, extracted the logo_signed and ulogo_signed, and then "reflashed" the logo_signed using (again)
Code:
fastboot flash logo [path to the logo_signed file]
My next try would have been flashing the ulogo_signed file, but since everything worked out, I'll surely skip that.
PS: Unless someone suggests, that I also should flash the ulogo_signed file (which somehow I doubt)
Pinky-swear: From now on I'll read the whole threads before doing "anything" and I try to avoid doing "anything" on top
Cheers.
Hi everyone,
I have a problem with my Moto G 2014:
Many times the screen locks, and when i try to slide to open it, it will not open but gets locked again and again and I can't use the phone.
I had this issue with 4.4.4 and also after i updated to 5.0.2.
I tried:
1) factory reset.
2) clear cache partition.
3) I try to slide the option bar ad get to the settings but its not alway working to bypass the lock.
4) I tried also to cancel the "slide" option in the security setting to "none" but it still get locked..
what causes the issue? problem with the system? with some sensors? is it a fixable problem?
Did you try to flash stock/ custom rom?
Is your bootloader unlocked?
Have you tried re flashing the firmware. It's just a guess but your system partition may be corrupted.
Thanks you both
I never tried flash custom rom or anything, and I don't know if my bootloader is unlocked.
To flash ROM I need to unlock the bootloader? the only way to fix system partition is to flash new ROM/reflash frimware?
gifnooky said:
I never tried flash custom rom or anything, and I don't know if my bootloader is unlocked.
To flash ROM I need to unlock the bootloader? the only way to fix system partition is to flash new ROM/reflash frimware?
Click to expand...
Click to collapse
Well, restore to stock firmware with adb and mfastboot at it should be fixed.
Which model are you using? (XT1064 usa single sim, XT1068 international dual sim etc. etc)
The site for the official moto g stock firmwares is down so it is pretty hard to find a legit stock firmware file these days.
Here is one for the xt1064 http://www.rootjunkysdl.com/files/M...AWS_XT1064_4.4.4_KXB21.85-17_cid9_CFC.xml.zip
and one for XT1068
http://d-h.st/VOw (use the BLUE download now button not the orange download button. the orange one tries to get you to use dev host's bad download manager)
You can flash it by installing this 15 second adb installer by Snoop5
http://forum.xda-developers.com/showthread.php?t=2588979
If the latest version does not work then use 1.3
After you have everything downloaded open a terminal at the location you extracted the firmware. Reboot you device into bootloader mode by powering it on while pressing both volume buttons. Plug it into the computer and let the drivers install.
Run these commands. It is normal that the first two give you error if you are currently on 5.x firmware.
Code:
fastboot.exe flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.sparsechunk.0
fastboot flash system system.img.sparsechunk.1
fastboot flash system system.img.sparsechunk.2
fastboot flash system system.img.sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
My model is XT1063
Is there a trusted original firmware to this version?
No solution found yet after searching for 2 months .
http://forum.xda-developers.com/showpost.php?p=61901608&postcount=65
gifnooky said:
Is there a trusted original firmware to this version?
Click to expand...
Click to collapse
sumondhk1 said:
http://forum.xda-developers.com/showpost.php?p=61901608&postcount=65
Click to expand...
Click to collapse
Yep. https://mega.nz/#F!pxxUyIDI!zjgWxdJzrZrjTum9xBpfCg Not my work, thank them from the original thread here http://forum.xda-developers.com/mot...riginal-motorola-firmware-collection-t3153533
ethanchow said:
Yep. https://mega.nz/#F!pxxUyIDI!zjgWxdJzrZrjTum9xBpfCg Not my work, thank them from the original thread here http://forum.xda-developers.com/mot...riginal-motorola-firmware-collection-t3153533
Click to expand...
Click to collapse
You did not get it, See my screen shot , its a hardware issue .
Nothing gonna change with stock rom.
sumondhk1 said:
You did not get it, See my screen shot , its a hardware issue .
Nothing gonna change with stock rom.
Click to expand...
Click to collapse
I know the screen ghost touches is hw problem but u asked for the original firmware.
Can anyone tell me what this (remote: Flashing is not allowed in Lock State).
What exactly is locked? Is my cell OEM unlocked?
I flashed the wrong TWRP (for the 2017 Red Magic-NX209J) and even though I have been able to unlock my cell via CMD commands; it remains permanently in fastboot mode?
If I send a CMD command to reboot it reboots straight back to fastboot mode.
No form of ADB connect seems to work an my windows PC cannot see/show the cell?
How the hell do I fix this? It's been in this state for a week.
Can anyone help?
Meaby try this?
Then, to unlock your bootloader, enter "fastboot oem nubia_unlock NUBIA_NX629J"
And meaby try the recovery backup instead of TWRP.
xronaldx said:
Meaby try this?
Then, to unlock your bootloader, enter "fastboot oem nubia_unlock NUBIA_NX629J"
And meaby try the recovery backup instead of TWRP.
Click to expand...
Click to collapse
Thanks for the suggestion. I have no recovery back up Is it possible to get past TWRP being locked and use CMD to flash the International or chinese ROM? Or recovery image?
Unless tools are developed to unbrick this device I am scared this problem might be permanent
Download this twrp, and then upload it to google drive or something so the rest of us can download it too .
Password is: 6i3i
https://pan.baidu.com/s/1ZdMPjm2fEwt...06770439204444
Secretcow said:
Download this twrp, and then upload it to google drive or something so the rest of us can download it too .
Password is: 6i3i
https://pan.baidu.com/s/1ZdMPjm2fEwt...06770439204444
Click to expand...
Click to collapse
Thanks but what do i do with it? Its all in an asain language?
Link not open bro
The TWRP does not work
Sorry. That link to the twrp does not result in a bootable twrp recovery for me.
I am starting to think my cell is not fixable.
I did not do that much wrong I just flashed the twrp for 2 models of red magic earlier. It only has a fastboot mode. I either get a boot screen then fastboot mode or a warning about the bootloader being unlocked.
Whatever is wrong with my cell prevents ADB connect an the cell is not able to be seen by windows.
This $1100 New Zealand dollar cellphone may be permanently bricked by my mistake.
I might just need to bin it an buy another one.
Lesson learned.
It confusing....
My cell acts like it has a softbrick (can turn off an on an has fastboot options and I have erased it an OEm an bootloader unlocked it)
And also behaves like a hard brick (resists every method of repair).
I just do not understand it or Nubia products. I am unfamiliar with this phone.
Does anyone have any clue how I can see this cell on my windows pc or ADB connect it an boot into TWRP?
Are there any Nubia repair software tools?
I already share nubia red magic 3 twrp check my all post
sandeepkhatri said:
I already share nubia red magic 3 twrp check my all post
Click to expand...
Click to collapse
Thanks for that. I'm talking about using CMD to totally wipe everything in the cell an reflash the Chinese ROM that came with it. Repair software. Might take months to develop software like that.
sandeepkhatri said:
I already share nubia red magic 3 twrp check my all post
Click to expand...
Click to collapse
Also it isn't a zip. It's some other kind of file. And does not boot into TWRP on my unit
So are you able to unlock your bootloader in its current state?
If you have an older TWRP installed maybe try changing the model on your bootloader command to match it:
fastboot oem nubia_unlock NUBIA_NX209J
If this works then flash the correct TWRP and the boot IMG from your original rom
fastboot flash recovery <new recovery>
fastboot reboot bootloader
Sent from my NX629J using Tapatalk
terrapin4 said:
So are you able to unlock your bootloader in its current state?
If you have an older TWRP installed maybe try changing the model on your bootloader command to match it:
fastboot oem nubia_unlock NUBIA_NX209J
If this works then flash the correct TWRP and the boot IMG from your original rom
fastboot flash recovery <new recovery>
fastboot reboot bootloader
Click to expand...
Click to collapse
Terrapin. Absolutely nothing worked. I am the 3rd person who has had this issue I know of. 2 other xda members had the same issue. One with TWRP like me an the other got stuck in fastboot mode after trying g to flash an apk of Gapps? I think these cells do not like tinkering. But your advice enabled me to be OEM and bootloader unlocked. But always.....straight back to fastboot mode no matter what I flash? My red magic 3 device is currently at a service center with a technician trying to solve the problem. I have 3 repayments left on my Xiaomi Mi9 that has zero flashing issues. O admit i.may be ignorant of the ways of Nubia ?
I did it
I extracted the file system.img
this is what I did ....
starting from the Chinese ROM http://ui.nubia.cn/rom/detail/62
Download download necessary files https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
enter recovery, use a FAT32 pendrive format, add Chinese ROM, rename it (update.zip) to OTG flash.
Everything works again.
good luck.
emmegitony said:
I did it
I extracted the file system.img
this is what I did ....
starting from the Chinese ROM http://ui.nubia.cn/rom/detail/62
Download download necessary files https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
enter recovery, use a FAT32 pendrive format, add Chinese ROM, rename it (update.zip) to OTG flash.
Everything works again.
good luck.
Click to expand...
Click to collapse
Thank God. Maybe the Chinese service guy I'm paying will get on xda an try your idea. I'm being lazy saying that lol. Thanks very very much. I will show your post to the service guy who has my red magic 3 or try it myself.
There's no way your a junior member working all this out. I'm a junior member listed as a senior member who makes rookie flashing errors with Chinese cellphones lol.
I will share if I can implement your ideas successfully. Thanks buddy my missus really loved this phone I felt really bad when I incapacitated it.
Fingers crossed.....
I have no idea how did you managed to flash the system.img
C:\adb>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magi
LE: After this error, somehow it manages to continue and flash all partitions of the system, but after above tutorial, the phone still reboots in fastboot mode and cannot access recovery
The solution is here:
https://forum.xda-developers.com/re...tboot-mode-t3937527/post79715050#post79715050
sakilxda said:
The solution is here:
https://forum.xda-developers.com/re...tboot-mode-t3937527/post79715050#post79715050
Click to expand...
Click to collapse
Thanks for the help. I do not understand some of the commands an cannot seem to get them right? And I do not understand why the instructions say to cmd flash the image (IMG) via command prompt (which just errors like the strange NON-HLOS command?) Then the instructions say to flash the Chinese rom via otg?
Are you supposed to flash the ROM twice?
Can someone please give me some more detailed instructions as this cell has been non functional about 2 months now.
Planning to fix it an give it to my partner
Bryceicle1971 said:
Thanks for the help. I do not understand some of the commands an cannot seem to get them right? And I do not understand why the instructions say to cmd flash the image (IMG) via command prompt (which just errors like the strange NON-HLOS command?) Then the instructions say to flash the Chinese rom via otg?
Are you supposed to flash the ROM twice?
Can someone please give me some more detailed instructions as this cell has been non functional about 2 months now.
Planning to fix it an give it to my partner
Click to expand...
Click to collapse
Hane you fixed the phone or not?
JerryYin said:
Hane you fixed the phone or not?
Click to expand...
Click to collapse
No still not working. Might try again when I have spare time. Very hard cellphone to fix
Bryceicle1971 said:
No still not working. Might try again when I have spare time. Very hard cellphone to fix
Click to expand...
Click to collapse
My suggestions is, download a full sd card update package, unlock the bootloader temporarily,extract the update file and flash the vbmeta.img to vbmeta partion, then flash the recovery.img to recovery partition, after that, try to boot into recovery through bootloader. You have to make sure that you use all the same file from same package, if you are use a low version vbmeta file to boot a high version system (or recovery ) it will not boot. the vbmeta is very important on this phone.
Can't even fastboot flash boot recovery system...and thats all folks...waste of money.
Failed attempt to unlock the bootloader and instal TWRP ?
Hi guys, visit this link. We had similar problems and we could solved that.
Read all and you would get the solution
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
roadworker said:
Failed attempt to unlock the bootloader and instal TWRP ?
Click to expand...
Click to collapse
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Just flash the ROM again..It will be back lm
mhex said:
Just flash the ROM again..It will be back lm
Click to expand...
Click to collapse
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
SuperDroidMe said:
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
Click to expand...
Click to collapse
Every time you restart back to the bootloader you need to do: "fastboot oem nubia_unlock NUBIA_NX629J" first
SuperDroidMe said:
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Click to expand...
Click to collapse
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
xphyle1971 said:
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
Click to expand...
Click to collapse
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
SuperDroidMe said:
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
Click to expand...
Click to collapse
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
mswl04 said:
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
SuperDroidMe said:
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
Click to expand...
Click to collapse
btw did you rooted the phone?
mswl04 said:
btw did you rooted the phone?
Click to expand...
Click to collapse
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
SuperDroidMe said:
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
Click to expand...
Click to collapse
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
mswl04 said:
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
Click to expand...
Click to collapse
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
SuperDroidMe said:
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
Click to expand...
Click to collapse
all you need to do is to fix the corrupt image so later once you finish the first step of booting to the phone then you can flash to global rom. if you have the cn version 2.27 boot.img then you can download the adb and use the command to fix the phone
Shouldn't have messed with something that wasn't broken. Now you have a nice brick to use as a paperweight. Hope you get it fixed tho. Good luck.
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
SuperDroidMe said:
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
Click to expand...
Click to collapse
Congrat you finally fix it
Hows your phone?..Did it work.