Features:
-based on JB sources
-used MaxFu initramfs
-DISABLED CAP_ERASE (safe kernel)
-All-in-1kernel because it supports CM9, CM10, Samsung, MIUI and CM10.1 ROMs with a single kernel image.
-CWM recovery from legacy
-CPU Overclock/Undervolt support (Overclock to 1.6GHz)
-CPU governor optimizations
-Reduced boot time
-Better touch sensitivity
-Available CPU Governors: Pegasusq , Ondemand, Interactive and Conservative, Performance, Adaptive, Powersave
-CIFS as module
-Available I/O schedulers: CFQ, noop, Deadline, SIO
-J4FS as module
-Lots of I/O tweaks and filesystem optimizations .
-USB Mass Storage mode is working in CWM Recovery and you can mount both internal and external sdcard as a disk drive
-NTFS automounting for USB sticks. When you plug in an NTFS formatted USB flash it will be automatically mounted to /mnt/ntfs folder.
-Adjustable mDNIe settings
Click to expand...
Click to collapse
ROM Support:
- ICS (4.0.X):
TouchWiz Based: TouchWiz, MIUI
AOSP Based: CM9, AOKP, PA...
- JB (4.1.X):
TouchWiz Based: experimental support for TouchWiz JB Leak
AOSP Based: CM 10, 10.1, SlimBean, AOKP
Click to expand...
Click to collapse
Bugs:
-64GB cards.
-Vibration Strength not alterable on AOSP roms.
-Camera Service not work on TouchWiz JB Leaks.
-HOME button not work on TouchWiz JB Leak XXLSC.
-Phone.apk maybe FC in CM10.1
-An empty symlink /d to disabled debugfs found, didn't see any problem with this.
Click to expand...
Click to collapse
Features to be added in next builds:
-BLN support
-CPU/GPU Boost (will be avaible in 2nd build)
-Slide2wake
-GPU OC
-others...
Click to expand...
Click to collapse
I'm not responsable for any damage on your phone.U take the risk.
Source Code: http://sourceforge.net/projects/kangbangkernel/files/N7000/Build#1/?
Credits:
-Adi_Pat (many thanks bro!)
-MaxFu for the Initramfs
-Samsung
-Sakindia123
-dr.ketan
Donators
aftnoon2
Thanks a lot for supporting me !
Downloads:
-Build #1
-STD version
Kang-Bang-STD-B#1.zip
Kang-Bang-STD-B#1.tar
-OC version
Kang-Bang-OC-B#1.zip
Kang-Bang-OC-B#1.tar
Changelog
Build#1:
-initial build
PA 2.57 benchmark test:
Kang-Bang 1.4 ghz Ondemand
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hydracore N4 1.4 GHz Ondemand
Great news!
Sent from my GT-N7000 using xda app-developers app
Looks good, will be keeping my eye on this! BLN support will be brilliant!
keep it up...this is a great start:good:
Nice work alx !
R: [KERNEL][20JAN]Kang-Bang Kernel Build#1 [TW-CM9-CM10-CM10.1-PA]
Wow! Good news for our note!!!
Inviato dal mio GT-N7000 con Tapatalk 2
Thanks guys BTW press thanks button not only say thanks
Sent from my GT-N7000 using Tapatalk 2
Good work mate!
Keep going !
Sent from my GT-I9003 using xda app-developers app
can you implement cpu clocksteps into 12 steps or maybe 18 steps just like the badass siyah kernel? it would be a blast on our note.:laugh:
Ok,i will try,thanks for suggestion
Sent from my GT-N7000 using Tapatalk 2
Just flashed over SlimBean RC1 but getting error message on boot saying "process com.android.phone has stopped". Any suggestions?
Is a bug for 4.2.1...phone.apk FC...will fix in next build
Sent from my GT-N7000 using Tapatalk 2
Cool, cheers
Sent from my Nexus 7 using XDA Premium HD app
You should try Utacka PA 2.57 and this kernel, best performance
Sent from my GT-N7000 using Tapatalk 2
Who want 1.8 GHz OC?
Sent from my GT-N7000 using Tapatalk 2
AW: [KERNEL][20JAN]Kang-Bang Kernel Build#1 [TW-CM9-CM10-CM10.1-PA]
Sorry to say that, but I have no WiFi on the latest 4.1.2 paranoid ROM. And after I've flashed Thor kernel again it was available again...
Sent from my GT-N7000 using xda app-developers app
I can demonstrate to you that I got wifi working make sure u flashed correctly
Sent from my GT-N7000 using Tapatalk 2
AW: [KERNEL][20JAN]Kang-Bang Kernel Build#1 [TW-CM9-CM10-CM10.1-PA]
oblikas said:
I can demonstrate to you that I got wifi working make sure u flashed correctly
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
What do you mean with "right"?
Flashed via mobile Odin + wiped cache and dalvik.
I believe, your WiFi is working, but I tried several times to restart my note, but it won't help
Sent from my GT-N7000 using xda app-developers app
Related
I absolutely take no creative credit in making this kernel as all I have done is putting the patches together and build based on the Atrix kernel tree. The real credit goes to them.
Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this Kernel!!!
Click to expand...
Click to collapse
Please use the CMW to update the kernel.
CIFS and nls_utf8 kernel modules are in system/lib/modules directory
My friend's atrix is experiencing some random reboot with 1.0.1 kernel (which is undervolt by default). I have added another kernel which is the same build with stock voltage. So if you are experiencing random reboot, please use the stock voltage version.
UV: under-volt by default
SV: Stock voltage, you can under volt it by stepcpu or other similar software
SF: Stock AVP(266MHz), 3D(300MHz), SDRAM(300MHz) frequency and stock voltage
Click to expand...
Click to collapse
Change log (for detailed change please visit My Kernel source ):
Code:
Version 1.0.2 (unified kernel for tegrapart):
> [B][URL="http://www.multiupload.com/WPX5AICGG4"]Version 1.0.2 -SV download link[/URL][/B]
> [B][URL="http://www.multiupload.com/XSYOTV2KL7"]Version 1.0.2 -SF download link[/URL][/B]
> [B][URL="http://www.multiupload.com/7J437AOZ6D"]Version 1.0.2 -UV download link[/URL][/B]
- update kernel to 2.6.32.44
- VFP patch (please see gitorious for log)
- unified kernel patch (thanks to eval-)
[B][SIZE="4"]Kernel version older than 1.0.1(inculding) are for [COLOR="Red"]AT&T[/COLOR] only[/SIZE][/B]
Version 1.0.1 (AT&T GB only):
> [B][URL="http://www.multiupload.com/QQRPJVM90Q"]Version 1.0.1 -UV download link[/URL][/B]
> [B][URL="http://www.multiupload.com/K955K7IQ6W"]Version 1.0.1 -SV download link[/URL][/B]
* OC/UV based on faux123's code. Big thanks to faux123 (this also fixes the 6mV on 1100Mhz)
- 3D engine clock at 350MHz (300MHz)
- Overclocked SDRAM from 300MHz to 333MHz
- Overclocked AVP 266MHz to 280MHz
Version 1.0.0 (AT&T GB only):
* JRCU: An RCU for SMP with a single CPU garbage collector
* BFQ (default), Vr and Simple I/O scheduler.
* SLQB memory allocator
* [URL="http://forum.xda-developers.com/showthread.php?t=1165938"]OC/UV based on edgan's patch[/URL] ~1.1G
* Kernel optimization
* Update to 2.6.32.43 kernel
* EXT4
* CIFS and nls_utf8 kernel modules are in system/lib/modules
* kernel based on ATT Atrix Stock GB source
Version 0.0.1 (AT&T froyo only):
* BFQ I/O scheduler (v2-r1)
* SLQB memory allocator
* Optimized ARM RWSEM algorithm
* Update to 2.6.32.42 kernel
* EXT4
* kernel based on ATT Atrix Stock FROYO source (v1.2.6)
Kernel source
Thanks, I'll try it out and post back.
Sent from my MB860 using XDA Premium App
And we have another custom kernel for the Atrix. Cool man .. the devs are back in business on the Atrix.
will we be able to use this kernel for OCing?
I think we need to grab/recruit bigrush from the Xoom community for oc'n tegra 2
Sent from my MB860 using XDA App
foreverzero89 said:
will we be able to use this kernel for OCing?
Click to expand...
Click to collapse
Not yet... I have not patch the OC yet.
Sent from my MB860 using XDA Premium App
release version 1.0.0 based on GB source code.
huanyu said:
release version 1.0.0 based on GB source code.
Click to expand...
Click to collapse
Giving it a go!
Sent from my MB860 using Tapatalk
Testing it now. Kernel seems very fast. 3500 both on quadrant and smartbench. Will continue to test to see battery drain.
Sent from my MB860 using XDA Premium App
Did anyone tried with Cherry Crust 0.6 Rom yet?
I'm on cherry pie v.5.
Sent from my Inspire 4G using XDA Premium App
Flashed on Alien 3 with Alien theme.
7 minutes after flash for reboot. Phone rebooted a second time on it's own.
Lost all my widgets, so have to set those up again which is nothing serious. That only takes 5 minutes.
Min clock speed available now is 300MHz. Currently at 1100/300 and stable.
Will watch battery life, and report back on stability later today after I have a few beers at the bar!
Nice work on this!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Most stable kernel I've used so far
Sent from my MB860 using XDA App
Lightning quick! I agree with neer, def most stable. No reboots as of yet and CPU seems to run slightly cooler.
Sent from my MB860 using XDA Premium App
Why is the min frequency 300 and not 216?
What are some good undervolt settings for this? I tried -75 on 300mhz and phone locked up/rebooted.
Just realized this broke my WiFi.
Going back to Faux's to see if that fixes it, otherwise it's a wipe and flash a ROM again.
CaelanT said:
Just realized this broke my WiFi.
Going back to Faux's to see if that fixes it, otherwise it's a wipe and flash a ROM again.
Click to expand...
Click to collapse
Since faux use a custom wifi module, before flash other kernel, its good idea to restore to stock kernel (faux has a zip to restore), so the new kernel use the standar wifi module.
It happens to me going from faux to edgan's kernel.
Im going to test now!
@huanyu
does this kernel includes tun.ko and advanced routing?
Also, why on 1100, setCPU shows 6mv?
Thanks
This is a custom kernel for Galaxy Ace GT-S5830 (not CyanogenMod)
Features :
2.6.37.6 improvement kernel
Overclockable > 800MHz above
Underclockable (672, 748, 768, 787)
Clock @800MHz for first
Support ext3 & ext4 internal system ROM
Swap support (a2sd GUI)
Cifs & Tun support
added scaling governor (interactifve, smartass, smartassV1, smartassV2, savagedzen, scary, minmax, interactiveX, superbad, DARKSIDE, lazy, virtuous, msm7k, smoothass, lagfree, brazilianwax, ondemandX, lulzactive, lionheart, greaselightning, etc)
added 4 i/o schedulling for better i/o (bfq, cfq, vr, sio)
Added cf-root kernel (with BLN, wifi compatible)
Busybox pre-installed
pre-rooted (updated su binary & app)
Screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Tested by SpaceCaker)
known bug:
- Haven't found yet, plz tell me! Cz I have no this device hehe
Download links :
Cooper_Kernel v1.2.1-exp-version [NEW] **
http://d-h.st/NrC
md5sum
d7621fc1ae488d6fe3fb222af3ea5c53
Cooper_Kernel v1.2 exp-version**
http://d-h.st/CHV
md5sum
0037e4c9e69bf0fdd84d80a53b1b44fe
Cooper Kernel #Delano v1.1 exp-version** ---> here
Cooper_Kernel_#Delano v1.0 ---> here
md5sum
0ca232f3a81ab7b557a750097a71d5c0
*Do nanbackup first before try this kernel update.
This kernel update is include no-frills application. it's used for change maximum & minimum cpu speed, governor, and i/o scheduler.
If get an error while u were setting maximum & minimum cpu clock, please set it to a normal freq (800MHz).
If u feel freak to No-frills CPU, just do delete it!
And, use SetCPU ^_^
**For this version, u don't be shocked at booting time. . Cz it's ok, not bricked your phone I did an experimental for this one . . backport the updated adreno drivers from 3.x kernel to my 2.6.37.6 kernel. and, many more features
Steps to install :
Go to recovery mode (press Home+Power on/off button while your phone's off)
Go to mount and storage | mount menu
Mount system, go back
Choose Install zip from sdcard | install menu
And choose file u've downloaded
Reboot and Enjoy!
Credits & Thx to :
Amarullz
Ketut Kumajaya
Chainfire
Samsung
Dev-host (for hosting )
CodeAurora
Phiexz
Jangs_momoi & Spacecaker (for helping me testing these kernels)
CyanogenMod Kernel (i've based this one and merged)
Source :
https://github.com/delanoister-Andro-ID/samsung_kernel_msm7x27
if u have problem with this kernel, report me, plz!
Do With Your Own RIsk!
For Changelogs
CHANGELOG 16/05/2012:
kernel 2.6.37.6 improvement
update features
use console_earlysuspend instead of fb_*
remove a few governors
fix screen black issue while it's turned on
etc
CHANGELOG 12/05/2012:
-kernel 2.6.37.6 improvement-
-update features
-Include Undervoltage Module for Cooper
-update to tegrak lulzactive
-backport adreno 3.x kernel
-enable cleancache & frontswap
-comes with new adreno libs
-etc
*NOTE: Change & apply your cpufreq or clock from CpuControl, to make this work properly ^_^
.-reserved-.
This is a custom kernel for Galaxy Gio GT-S5830
Click to expand...
Click to collapse
Gio?
Yay,you are working for Ace
Your title say and i quote:
[Kernel] Delano Custom Kernel GT-S5830
Click to expand...
Click to collapse
But in first post you say and i quote:
This is a custom kernel for Galaxy Gio GT-S5830 (not CyanogenMod)
Click to expand...
Click to collapse
So my question is: Can i install this in s5830 or not
Wow!!u said u working in morning and now u release it!!!
Sent from my GT-S5830 using xda premium
The.Keeper said:
Your title say and i quote:
But in first post you say and i quote:
So my question is: Can i install this in s5830 or not
Click to expand...
Click to collapse
It might have been a mistake by him
Awesome
Awesome Work dude continue your great Work!!
I'll try it.
Great work bro!
Delanoister said:
This is a custom kernel for Galaxy Gio GT-S5830 (not CyanogenMod)
Click to expand...
Click to collapse
Dude kernel for Ace not GIO correct the thread Please!!
This kernel can overclock until ?
Sorry for my bad english ..
Sent from my GT-S5830 using Tapatalk 2 with jumpstyle v.1 rom ..
ardidroid said:
This kernel can overclock until ?
Sorry for my bad english ..
Sent from my GT-S5830 using Tapatalk 2 with jumpstyle v.1 rom ..
Click to expand...
Click to collapse
Simply Read First Post!
slaid480 said:
Dude kernel for Ace not GIO correct the thread Please!!
Click to expand...
Click to collapse
Hehe sorry for the 1st sentence of paragrap.
I mean Cooper device hhe.
SpaceCaker has tested this yesterday.
Sry for lately reply.
Cz I made a thread at 2:00 a.m lol
Im sorry xixixi.
Thx for suppprt anyway hehe.
OC to 902/921/940.
It also depends to your handphone condition, too
Sent from my GT-S5660 using Tapatalk
For me since i flashed its stable ofcourse
And still using it
Delano
U already changed the name of *youknowwhat*
Lol
unwritten sentance
Rushabh25 said:
Wow!!u said u working in morning and now u release it!!!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Hehe.
Sent from my GT-S5660 using Tapatalk
Prawesome said:
Yay,you are working for Ace
Click to expand...
Click to collapse
Hihi.
Yay.
Sent from my GT-S5660 using Tapatalk
spacecaker said:
For me since i flashed its stable ofcourse
And still using it
Delano
U already changed the name of *youknowwhat*
Lol
unwritten sentance
Click to expand...
Click to collapse
What roms u have tested anyway?
Lol. Why could u say that?
Sent from my GT-S5660 using Tapatalk
Delanoister said:
What roms u have tested anyway?
Lol. Why could u say that?
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
I tested on 4 stock roms
Xwks2
Kt5
Xwkt7
Ddkq8
unwritten sentance
Hello. Flashed on imaginary v4 a while ago. No problems yet. Working good so far..
Sent from my GT-S5830 using XDA
Hi guys after some time i finally got my own kernel compiled
first kernels didnt booted but latest ones thanks to An0nym0us_ bootimgtools they work fine now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Feautures of the Kernel
OC
122 MHZ
200 MHZ
245 MHZ
320 MHZ
480 MHZ
614 MHZ
787 MHZ
806 MHZ
825 MHZ
844 MHZ
864 MHZ
883 MHZ
902 MHZ
921 MHZ
940 MHZ
960 MHZ
Only use these frequencies if you are experienced user with OC
Click to expand...
Click to collapse
UV
Governors:
smartassV2
smartass
interactiveX
interactive
conservative
ondemand
userspace
powersave
performance
RamZwap
Swap
rZwap
Cifs
tun
EXT4 EXT 3 EXT 2 RFS Support
I/O Schedulers
noop
deadline
SIO
good Battery Life
Custom BootLogo
Custom BootAnimation
Thanks to :
Nims11
An0nym0us_
LibiSC
Zcop
side_effect for some extra help
OldDroid For fixing my bootanimation resizer ( he signed it with special program so it worked )
AOKP for original bootanim mine is instead of colorfull BW
and Ketut.kumayaya for rle to png png to rle tool
Sources
My Github Sources are Here :- https://github.com/spacecaker/Stock_spacecaker_kernel
Downloads
V2:-http://www.mediafire.com/download.php?3mx05sf63lcl52m
V3 http://www.mediafire.com/?pj4466f66kr4o89
VV4.0:- *NEW* http://www.mediafire.com/?zcmt6c8bigrs7sh
How to Install ?
download the zip file
go to install zip from sdcard and flash the zip u downloaded
Done
Reboot and check about phone if it worked
u will see something like this in kernel version
Changelog :-
Code:
V4- Change CPUfreq
edited every Volt frequence to reduce battery usage
governor tweaks
Phone more stable thanks to the cpufreq hack
V3- Deleted RamZwap Caused some unstability / LAG
V2 - Renamed to Space-Kernel * is my name thats why :p *
Fixed EXT4 support thanks to Nims
V1 - Initial Build some bugs like NO EXT4 system crashes
Well done job friend..:thumbup:
Waiting for this since long time..
KranTi said:
Well done job friend..:thumbup:
Waiting for this since long time..
Click to expand...
Click to collapse
thanks
i was waiting for this a long time to
So are you a dev or a themer
BTW Nice job!
Finally!
It compiled huh?
Great job!
masterex567 said:
Finally!
It compiled huh?
Great job!
Click to expand...
Click to collapse
it always compiled
only first i was using wrong device configs i was using beni ( aka mini )
instead of cooper
and since the latest ones booted fine i moddified the kernel
next up is fixing my pc for building cm10 from sources
Sent from my GT-S5830 using xda premium
Finally after i got some help from BNC Dev Gio Team
Ukie Tux
ive forced my sources to be updated to git with git push -f
thanks mate
Source Now available
now the themer who's becoming a dev
great work space...:gud luck
will you make kernel for CM rom too ?
LepayDS said:
will you make kernel for CM rom too ?
Click to expand...
Click to collapse
Later
I will try to compile for cm7 /9 /10
But now enjoiying my free time
Sent from my GT-S5830 using xda premium
SpaceCaker said:
it always compiled
only first i was using wrong device configs i was using beni ( aka mini )
instead of cooper
and since the latest ones booted fine i moddified the kernel
next up is fixing my pc for building cm10 from sources
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Beni is Galaxy Fit lol...
BTW great job! I will use this as soon as I go to stock! :good:
(SWAG)ger ->Secretly We Are G*y.. DAFUQ dude?!
Nice work though, needs a better name
SpaceCaker said:
Later
I will try to compile for cm7 /9 /10
But now enjoiying my free time
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
what rom are you using? is just stock or a stock custom rom? i'm waiting for your sgs3 rom
gonna try this later, already downloaded
I was using stock rfs xwktr rom
And also tried on xwktr deodexed + ext4 custom rom
Sent from my GT-S5830 using xda premium
can u tell us what u did in the kernel which improves battery?
zeeshanhassan said:
can u tell us what u did in the kernel which improves battery?
Click to expand...
Click to collapse
I used parts of battery extender source for battery files
Sent from my GT-S5830 using xda premium
Soo any respons of users of this kernel?
My own respons
On RFS
Oc to 940 mhz gives System Freeze
Sent from my GT-S5830 using xda premium
Hi!
Nice kernel!
can you make possibility to set the maximum frequency to 800?
thanks
iron86 said:
Hi!
Nice kernel!
can you make possibility to set the maximum frequency to 800?
thanks
Click to expand...
Click to collapse
Will look into that
Sent from my GT-S5830 using xda premium
DETAILS:
-Build from siyah S3 1.9.1 kernel source.
-Enabled kernel KSM support.
-Enabled cleancache support.
-supports STweaks v1.1
-enabled 500MB Zram with zcache
-zram with SNAPPY compression as first swap priority
(LOW CPU LOAD FOR COMPRESSION of ram memory blocks with little loss of compression ratio compared to default LZO compression)
-swappiness set to 100
-optional script to enable preloadSWAP as second swap priority (dont use this if you use dualboot else you will lose /cache of second rom)
(preloadSWAP is making use of /preload as swap partition)
source: https://github.com/psndna88/AGNi-pureKERNEL-I9300
BUGS: d:
- wifi hotspot not working on CM ... (i havent looked at this yet)
- no support for Sammy 4.2.1 rom unless its kernel souce released !
SCREENSHOT:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> < Zram with preloadSWAP >
CREDITS:
gokhanmoral for siyah source
CM team
adishakthi for 'AGNi'
R: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) STILL WIP
Sorry but where is the download link
Sent from my GT-I9300 using xda premium
valerio.tosti said:
Sorry but where is the download link
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
its still WIP=work in progress... i dont wish to publish a half tested kernel...
edit: ive put it up for brave users !
psndna88 said:
its still WIP=work in progress... i dont wish to publish a half tested kernel...
Click to expand...
Click to collapse
At this forum, we don't like placeholders. Post what you have or this thread will be locked.
Theshawty said:
At this forum, we don't like placeholders. Post what you have or this thread will be locked.
Click to expand...
Click to collapse
alright I hav put it....
brave users can test it
psndna88 said:
alright I hav put it....
brave users can test it
Click to expand...
Click to collapse
It does not boot on MIUI_Polymorph's MIUI v5 (Which I assume is Sammy Based with a CM10 Base Rom)
It functions fully on CM 10.1 except mounting (mentioned in op)
I did not test anything else.
sewer56lol said:
It does not boot on MIUI_Polymorph's MIUI v5 (Which I assume is Sammy Based with a CM10 Base Rom)
It functions fully on CM 10.1 except mounting (mentioned in op)
I did not test anything else.
Click to expand...
Click to collapse
Curent versions of _miui.polimorph_ are CM10 (4.1.x) based. This kernel is for CM10.1 (4.2.x). That might be one reason for not booting.
@psndna: By the way, is there any possibility to also make this compatible with CM10?
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
cm 4.2.2 looks good with this kernel but boot sucessful with sammy 4.1.2 rom?
Sent from my SHW-M440S using Tapatalk 2
thanks for the kernel.. works great as im able to overclock and use previous siyah's kernel settings again.. just worth noting, there seems to be an issue with the backlight buttons as they stay enabled even when disabling the option in advanced menu..
(CM10.1 4.2.2)
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
Polimorph, the kernel is described to be based on Siyah sources and only improved for latest CM10.1 meaning it is multiboot.
Siyah supports Sammy 4.1.1-4.1.2 and CM10/10.1
Sent from my GT-I9300 using xda app-developers app
Awesome work, thanks!
I've always said that a Multi-Boot kernel (even if its only for CM roms) is very important.
BTW, have any benchmarks about the new Mali drivers? What's the big difference?
Thanks PSN!
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
it doesn't work with sammy rom regardless of 4.1.x and 4.2.x...I got always black screen.
Sent from my SHW-M440S using Tapatalk 2
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
So the kernel is working for a single rom but not for dual boot?
Enviado de meu GT-I9300 usando o Tapatalk 2
R: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
Work whit Temasek rom v82
Sent from my GT-I9300 using xda app-developers app
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
Nice temp fix! even the GPU overclocking works with carbon ROM 1.5. Well, at least the first 4 steps hope gm comes back on soon!
Sent from my GT-I9300 using Tapatalk 2
sungc007 said:
it doesn't work with sammy rom regardless of 4.1.x and 4.2.x...I got always black screen.
Sent from my SHW-M440S using Tapatalk 2
Click to expand...
Click to collapse
same here...
4.1.2 official won't boot with this kernel.
It gives black screen.
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
sungc007 said:
it doesn't work with sammy rom regardless of 4.1.x and 4.2.x...I got always black screen.
Sent from my SHW-M440S using Tapatalk 2
Click to expand...
Click to collapse
Where did u get 4.2.x Samsung rom?
Sent from my GT-I9300 using Tapatalk 2
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
I'm yet to test on Sammy 4.2.1 ....
I'm in process of applying changes to siyah initramfs structure in code where it applies rom-type specific initramfs...
Info: as this kernel has new Mali drivers... It will work only in ROMs using kernels with new Mali drivers. Old Mali roms will not work.
Sent from I9300 Stock based Ultimarom v11 4.1.2 + my compiled Siyah Kernel v1.8.9 with KSM & cleancache support.
th3g0d said:
Where did u get 4.2.x Samsung rom?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
You're outdated. Please search it yourself at sammobile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello all, before I get into kernel features I would like to say that I am new to kernel development no knowledge at all ..just a weebie passing by to know some stuff. Changelogs in green
Kernel Features:
* Governors :
- SmartassH3
- Lulzactive
- Smartassv2
- HotPlug (Caused Several issues)
* IO Schedulers:
- SIO
- SIOPLUS
* Kernel Features:
- Only upto 1.3ghz (stock CM)
- Add SWAP support
- Add UKSM
- Added Seperate OC Kernel upto 1.6ghz[FOR ALL]
- Add CPU Boost Drivers
- Support for Lollipop
NOTE: The features listed above are same to all android versions of this kernel.
* Tested On :
- AOGP Nightlies
** Using SmartassH3/SIO runs smooth with great battery life.
***Post your reviews by trying this on other ROMs to make it better.
- Cosmic CM
** Using SmartassH3/SIO runs smooth with great battery life.
- CM12
** Using Lulzactive/SIO-PLUS runs smooth with great battery life.
How to Install :
- Flash it via CWM/TWRP/PHILZ etc.
Downloads :
Stock version will have "stock" Tag to it.
DOWNLOAD
Latest version will be on thread title
* Credits :
- pawitp for Kernel Tree
- k2wl my mentor
- xenon92 for inspiration with his nebula kernel
- koush for his flashable zip
HAIL HYDRA !!!!
XDA:DevDB Information
Frost, Kernel for the Samsung Galaxy Grand Duos i9082
Contributors
codekidX
Source Code: https://github.com/codekidX/android_kernel_frost_i9082
Kernel Special Features:
Version Information
Status: Stable
Created 2014-11-03
Last Updated 2016-02-19
Fabulous buddy.!!
Sent from my MI 3W using XDA Free mobile app
2nd to reply..... Awesome features........ Will try in some time .... Keep up the awesome work !!!
Ow, great work. : )
4th to reply ...superb Bro.
Governors & I/O schedulers explanation!
for those of u who don't understand what opting those "random texts" under Governors and I/O schedulers (that's what i USED to call them) will do to your device , head over here! Everything about governors and I/O schedulers and their respective features are explained in great detail!!
http://forum.xda-developers.com/showthread.php?t=1663809
Gr8 Job @codekidX Awesome So many Development On our Grand Duos Keep Up The Good Work
Question
Supports SWAP function or not???? Btw Working Fine awesome Kernel Brotha
Can I install on COSMIC CM 5.6 ????????
Memo Yasso said:
Can I install on COSMIC CM 5.6 ????????
Click to expand...
Click to collapse
Yep.
freakynexx said:
Supports SWAP function or not???? Btw Working Fine awesome Kernel Brotha
Click to expand...
Click to collapse
Thanks ...no I'll enable it in the next version
codekidX said:
Thanks ...no I'll enable it in the next version
Click to expand...
Click to collapse
Great work @codekidX
Amazing battery life on aogp
BTW can you optimize your kernel with linero toolchain??
Sent from my GT-I9082 using XDA Premium 4 mobile app
Reboots 9082L when trying to place a call. (4.2.2, Stock)
Paul_Days said:
Reboots 9082L when trying to place a call. (4.2.2, Stock)
Click to expand...
Click to collapse
Can you change the governor to something else and try to call again ?
To anyone ...
@codekidX...thanks brotha for this excellent kernel..I am using the one meant for Stock Rom..I found the OC to be 1.2 Ghz instead of 1.3...am I right? ?? Just asking...Though I don't think overclocking always helps thanks a lot again..
EDIT: I am also getting reboot as soon as i try to make any call..tried to change the governers but the result is the same
After I flashed the kernal for stock rom.the phone reboots when I try to make a call and recive a call
Sent from my GT-I9082 using Tapatalk
PROBLEM with this kernel
Can't make call and receive call on stock 4.2.2 rom.?
Please fix it as well as possible, this kernel is execellent?????????????:victory:t
Paul_Days said:
Reboots 9082L when trying to place a call. (4.2.2, Stock)
Click to expand...
Click to collapse
chinyeww said:
Can't make call and receive call on stock 4.2.2 rom.?
Please fix it as well as possible, this kernel is execellent�??????????:victory:t
Click to expand...
Click to collapse
wild firefire said:
After I flashed the kernal for stock rom.the phone reboots when I try to make a call and recive a call
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
SACHIN SHUKLA said:
@codekidX...thanks brotha for this excellent kernel..I am using the one meant for Stock Rom..I found the OC to be 1.2 Ghz instead of 1.3...am I right? ?? Just asking...Though I don't think overclocking always helps thanks a lot again..
EDIT: I am also getting reboot as soon as i try to make any call..tried to change the governers but the result is the same
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=2799524&d=1402834928
Flash the above file through recovery.
codekidX said:
Can you change the governor to something else and try to call again ?
To anyone ...
Click to expand...
Click to collapse
You forgot to include the prebuilt VoiceSolution.ko module to /system/libs/modules.
Attaching it here.
Can i install it in Touchwiz V8 ???
ADAWYA said:
Can i install it in Touchwiz V8 ???
Click to expand...
Click to collapse
As it's based on Stock. Yes. Just as precaution take backup before flashing.