Database Develop

[Recovery] ClockworkMod 5.0.2.0 Official

I just noticed it now, grab it here:
S-OFF
recovery-clockwork-5.0.2.0-buzz.img
S-ON / fake-flash
recovery-clockwork-5.0.2.0-buzz.zip
Haven't tested it, try it at your own risk but should be safe
S-OFF: flash with fastboot with
Code:
fastboot flash recovery recovery-clockwork-5.0.2.0-buzz.img
S-ON: simply rename to update.zip and put it on your SD card

Eh!!! Confused!!!!! cwm 5.0.2.0 been around for ages????
"sent from me2u"

I just didn't see it posted lol, did a search and didn't see the official 5.0.2.0, only older and customized versions

Can anyone help me install it?
I've installed v4.0.1.4, but I can't install it
I want install from Ubuntu please...
Regards!!

Cwm can be flashed when s-on?
I don't have wildfire... my friend has...
If it works ill flash it from his s on hboot...
Edit: his hboot is 1.01.0002
Sent from my MB525 using xda premium

So...what's new in this version?
(Also, is there a way to change the color of text in the recoveries, I want the orange color back )

Qarl said:
Can anyone help me install it?
I've installed v4.0.1.4, but I can't install it
I want install from Ubuntu please...
Regards!!
Click to expand...
Click to collapse
Assuming you have S-OFF, install the Android SDK and just boot into the bootloader, then select fastboot and use the command in the first post...
nogoodusername said:
Cwm can be flashed when s-on?
I don't have wildfire... my friend has...
If it works ill flash it from his s on hboot...
Edit: his hboot is 1.01.0002
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
With S-ON, you can only use the fake flash by renaming the .zip to update.zip and "flash" it from the stock recovery to launch CWM...
nejc121 said:
So...what's new in this version?
(Also, is there a way to change the color of text in the recoveries, I want the orange color back )
Click to expand...
Click to collapse
No idea

Kwen said:
Assuming you have S-OFF, install the Android SDK and just boot into the bootloader, then select fastboot and use the command in the first post...
Click to expand...
Click to collapse
Yes, I've S-OFF.
Turn ON my device on Fastboot, it's connected to computer obviously!
If I run:
Code:
fastboot flash recovery recovery-clockwork-5.0.2.0-legend.img
The console says that "fastboot" isn't a valid command.
If I am in Android SDK directory and run:
Code:
./adb devices
The console don't found any device.
Where is the problem?? Is this usable on Ubuntu? I'm use it.
Regards and sorry my bad English

See http://developer.android.com/guide/developing/device.html
"If you're developing on Ubuntu Linux, you need to add a udev rules file that contains a USB configuration for each type of device you want to use for development. In the rules file, each device manufacturer is identified by a unique vendor ID, as specified by the ATTR{idVendor} property. For a list of vendor IDs, see USB Vendor IDs, below. To set up device detection on Ubuntu Linux:"

Qarl said:
Yes, I've S-OFF.
Turn ON my device on Fastboot, it's connected to computer obviously!
If I run:
Code:
fastboot flash recovery recovery-clockwork-5.0.2.0-legend.img
The console says that "fastboot" isn't a valid command.
If I am in Android SDK directory and run:
Code:
./adb devices
The console don't found any device.
Where is the problem?? Is this usable on Ubuntu? I'm use it.
Regards and sorry my bad English
Click to expand...
Click to collapse
This word in'valid
Change Legend to buzz
fastboot flash recovery recovery-clockwork-5.0.2.0-buzz.img
Click to expand...
Click to collapse

If you're on Windows, have you that in the recovery installation folder?:
AdbWinApi.dll, adb.exe, fastboot.exe and recovery-X.img

Good call, copy paste error
Also if you don't have the fastboot command, you'll need to download the "Android SDK Platform Tools" (under "Tools") from the SDK manager (how did you get adb working though without the platform tools?!)
Should be under the same directory...

Just rename the zip to pc49img.zip making sure you DONT name it pc49img.zip.zip place it on the root of your sdcard (ie.not in any folders) boot your phone into hboot via volume down and power whilst phone is off and when prompted press volume up to update then reboot into recovery to see your new cwm. SIMPLES.
"sent from me2u"

First, I go to "android-sdk/platform-tools" with the terminal.
Then, run this command:
Code:
fastboot flash recovery recovery-clockwork-5.0.2.0-buzz.img
And the terminal return this:
Code:
< waiting for device >
What's happen? If I run "adb devices", my HTC Wildfire is founded.
Regards!

Did you highlight fastboot in the bootloader/hboot and pressed power to select it?
It should say fastboot usb plug or something like that

Kwen said:
Did you highlight fastboot in the bootloader/hboot and pressed power to select it?
It should say fastboot usb plug or something like that
Click to expand...
Click to collapse
Problem solved!!!
I believed that the device reboots to fastboot when the command executed it.
Sorry ¬¬
Thank you very much!

slymobi said:
Just rename the zip to pc49img.zip making sure you DONT name it pc49img.zip.zip place it on the root of your sdcard (ie.not in any folders) boot your phone into hboot via volume down and power whilst phone is off and when prompted press volume up to update then reboot into recovery to see your new cwm. SIMPLES.
"sent from me2u"
Click to expand...
Click to collapse
I think you'll need a flashable zip, the one koush provides is just a img and a fake flash .zip

@Kwen, yes copy/past error xD

how can i call the yes/no event in this recovery with an updater-script?
other phones have recovery that have a list of comand,that you can add to an updater-script to call some recovery functions.
also this?

slymobi said:
Just rename the zip to pc49img.zip making sure you DONT name it pc49img.zip.zip place it on the root of your sdcard (ie.not in any folders) boot your phone into hboot via volume down and power whilst phone is off and when prompted press volume up to update then reboot into recovery to see your new cwm. SIMPLES.
"sent from me2u"
Click to expand...
Click to collapse
How do I do this if the OS itself is crashed and I get a white screen and HTC logo???

Stuck while updating N1 to TexasICS.Phone not booting.

Hello All,
I am a noob and recently learned how to root, unlock or re-partition, install blackrose etc but using your blogs and wikicynogemod.
I am trying to update my phone to Texas ICS using blog by OP- http://forum.xda-developers.com/showthread.php?t=1366897
I was able to reach till the step mentioned below :
i.e.
fastboot flash hboot hboot_brcrust_220-10-206-ICS.nb0
fastboot reboot-bootloader
fastboot -w
and now my phone shows TexasICS on the second line that mans it flashed correctly.
I downloaded the tar file "Evervolv-Perdo-2.2.0a6" but I am clueless about the next steps.
1. To build Evervol --> How and where as repo command doesnt work on my computer undert android sdk directory
2. tar xjf --> I am using windows 7 and hence no tar on my laptop.Meanwhile I am downloading the zip file also and see if unzip works.
But I am curious where to run these commands- either on cmd prompt under android-sdk directory or the phone emulator.
And interestingly, android-sdk dont have unzip/tar command and I have no access to phone now, its not booting.
Also I cant login to my phone now, when I boot it, its stuck at the Nexus One startup logo, not going further, so I believe I can't put anything in the SD card now.
Kindly help as my phone is not accessible now and I am kind of handicapped because of that
FYI : Recently I upgraded the phone to 2.3.7 using Cynogenmod, clock recovery.

you might have lost ur recovery
so fastboot any preffered recovery.img . put .zip in sd and flash it
or you can fastboot system.img, boot.img n recovery.img
Sent from my Nexus One using Tapatalk

If you have a custom recovery like clockworkmod just turn on your device holding trackball or something (I don't remember exactly) and you'll be in recovery or fastboot. Anyway, go to recovery and restore your nand backup. After that you can keep trying (or read below).
If you don't have a backup you can insert the SD card directly into the computer and copy the Evervolv latest version (.ZIP). Then go to recovery and wipe data & cache then install the zip from sd card.
You don't need to pay attention to the building Evervolv part of the post as it's not needed for the install. Don't forget to flash gapps later if you want to.
Sorry for my English and I hope this helps as I'm a bit noob also
Sent from my GT-P7510 using xda app-developers app

flash recovery
Flash recovery by
booting in fastboot
fastboot flash recovery recoveryNAME.img
then reboot to recovery u will get recovery the flash ICS.zip rom

Complete Installation Guide for JB or ICS on a Nexus One (Updated 12/29/12)

I initially looked for a complete update guide on here and eventually found all the information I needed, but it was in multiple places and sometimes hard to find. After getting everything installed on my N1 I thought I would write a guide for other noobs like me that want to try out ICS or JB but would like a step-by-step guide. I hope that it is helpful. SpazeDog ROMs (both ICS and JB) are working wonderfully on my N1 - its a very nice update from CM7 with only minor issues so far.
Note: this was initially written specifically for SpazeDog roms, but as they have not been updated in a while I have provided links to other popular roms as well. If you would like to try a different ICS or JB rom this guide should work, just substitute with the appropriate rom and depending on the one you choose, you may also need to install Google apps.
If you looking at this guide and don't know the basics yet, check out the Newbie Friendly thread first.
Links to popular roms that will work using this guide:
Evervolv JB 4.2
Evervolv JB 4.1
CM 10, JB 4.1.2 by vijendrahs
CM 10, JB 4.2.1 by vijendrahs
Spazedog ICS/JB
Disclaimer: This guide involves making changes to your phone that potentially could brick your phone leaving it unusable. I am not liable for any changes you make or problems you may have with your phone. You should at least be familiar with entering commands using command prompt. This procedure will erase ALL the data on your phone. Make sure you have a backup of everything. A nandroid backup is highly recommended. Proceed at your own risk.
Before we get started make sure you have the following: a rooted Nexus One, a USB cable to attach your phone to a computer, and the Android SDK. If you are just now installing the Android SDK, open the SDK manager and make sure to install the "Tools" and in "Extras" the "Google USB Driver" are checked off and download them. Alternatively, you just download ADB and Fastboot (search this forum or google). If you have a Mac see this thread to get started with ADB and Fastboot.
If you Nexus One is NOT already rooted, then follow this guide from Cyanogenmod to root your phone. If you plan to use the adb commands below (they are optional) make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Step 1 - Download everything you will need:
4EXTRecovery Updater - the first link will download the .apk to your computer or phone.
BlackRose - go down to bottom of the first post to "Attached Files" and download the latest BlackRose zip file. If you don't want to do it yourself, check out this thread to flash a pre-made partition scheme. Often the developers (Evervolv) will also have a partition schemes that you can flash via Fastboot from your PC as well.
Your rom of choice - go to the downloads section and choose which rom you would like to try. Download the zip installation file.
Since you will be decreasing the size of your partition that apps can be stored on consider something like Mounts2SD or AD2SDX to move apps to your SD card.
Step 2 - Install and use 4EXTRecovery Updater on your phone:
The easiest thing to do is go to the 4ext link above, download and install it, directly from your nexus one. You can also install it by copying the APK file to your SD card, then using a file manager to find it and install it or you can use command prompt by opening command prompt, cd to the location of the Android SDK tools, and then type in the following command (replacing "path" with the path to where the APK is located on your computer):
Code:
adb install /path/4EXTRecoveryUpdater.apk
After you have installed 4ext open the 4EXT Recovery Updater. Tap "Settings" → "Allow" superuser request → "Yes" to connect to 4ext to get new data. Now select "Online install/upgrade" → "Yes" assuming it detects your nexus one correctly → select and install the latest 4ext recovery (at the top of the list).
After 4ext has installed, it will have placed a recovery image on your SD card - find it (its called recover.img) and it should be located in SD/Download/4EXT_Recovery_Touch/ folder. Copy this to your computer in case something goes wrong later and you need to re-flash the recovery image!
After installation of the 4ext recovery turn off your phone and boot into recovery by turning off your phone, turning it on again while holding the trackball down. This will boot into the bootloader, then press the power button once, use Volume Down to select "recovery" and press the trackball to select. Alternatively you can use the command prompt:
Code:
adb reboot recovery
Your phone should now boot into the 4ext recovery menu. Before moving on make sure you have any important stuff backed up because you are about to erase your entire SD card! Select "tools" →“partition sd card” → “remove all partitions and start from scratch.” Then for the 1st partition select “1024″ for a 1GB partition (this will be where ICS will be able to put your applications & data). Select "skip" for the 2nd partition and for the swap partition. Finally select the system “ext4″.
Step 3 - Copy the Evervolv, SpazeDog, or whatever zip installation file you have chosen to your phone's SD card
Download the ICS or JB zip file above and copy it to the root of your newly formatted SD card.
Step 4 - Installing and using BlackRose to resize the system partition:
Download the BlackRose application and install it on your computer. (Alternatively people have made flash-able partition schemes that you can just flash from your PC - usually links and instructions are provided in the installation rom's thread, Evervolv's here. If you do have access to a computer you can check out this thread).
Make sure your nexus one is attached via USB to your computer.
Open the BlackRose application - it will install and reboot your phone. Then follow along as shown in this video to resize your partitions for a JB ROM.
If you plan to install the ICS rom then use the video above as a guide but use the numbers (sizes) for the different partitions as indicated below.
After BlackRose has installed you will need to restart the application. After it has started up and recognized your device select "apply stock/custom blackrose" by typing in 1 and enter.
Then select "custom blackrose" by typing in 2.
Then type "resize" when prompted.
Now you will need to change the sizes of the system partition to 220 for ICS or 260 for JB.
Change the cache size to 8.
Finally name the new system partition, either "ICS" or "JB" depending on what you plan to install.
Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip.
Step 5 - Install JB or ICS:
Now turn your phone off and boot into recovery as you did in step 2.
4ext will load. Select "wipe/format" → "format all partitions (except sdcard)" and then also "wipe data/factory reset."
Now go back and select "install from sdcard" → "choose zip from sdcard" → and then select the ICS or JB zip you copied to the SD card in step 3.
Now either the ICS/JB installer will load or it will just install in one step. Just follow the prompts to install and enjoy.
Depending on the ROM you chose you may need to install Google apps (see the specific ROM thread for details) and will also likely want to flash an apps-to-SD script as mentioned above so you do not run out of space.
This method worked perfectly for me, hopefully it will work well for you as well. Enjoy.

Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!

diegolm said:
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
Click to expand...
Click to collapse
I am sorry to hear that. Can you boot into recovery or is that broken as well? If you can boot into ext recovery try selecting "wipe/restore" → "wipe data/factory reset" and then try to install BCM again. I probably should have added that above, I will do that now.
If your recovery is broken but you can get into the bootloader (holding down trackball while starting up), you should be ok. You will probably need to flash Amon_Ra's Recovery using Hboot as was described in the guide from cyanogenmod link above. If there is a way to directly hboot flash 4ext recovery I don't know how to do it. Then you can try installing BCM again from the Amon_Ra's recovery and re-install 4ext after you get everything working.

I tried the Texasice ROM and it worked, but I didn't like it! Later I tried again BCM and It worked! I dont know, maybe I did something wrong... Anyway thanks again for the guide!!

Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2

intel415 said:
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I am not sure which part you are referring to, but, yes, a few of the above instructions could be replaced with fastboot commands.

The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2

intel415 said:
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I used the adb commands above because you can use adb to reboot directly into recovery (fastboot you can only reboot normally or into the bootloader) and you can also use adb to directly install apk files - fastboot cannot do those two things - it is more for flashing images (recovery, roms, etc). In order for adb to work make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Note that adb commands are not required - you can reboot into recovery and install the 4ext manually.
It won't let me post a link right now, but just google "adb commands" to find a list of all the commands you can use.
Hope that helps.

Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2

intel415 said:
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
Yeah, its not bad - glad you got it working! ICS has been smoother than cm 7.2 for me as well.
Blackrose didn't ask me about userdata - it just assumed that automatically after putting in 220 system and 16 cache... I'll make note of that in the guide so its clearer. Thanks.

Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.

Look for "recovery.img"
bobbyphoenix said:
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Click to expand...
Click to collapse
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.

c2med said:
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
Click to expand...
Click to collapse
OK I'm stuck on what the path name is suppose to be. I tried it every way I can think of. Can you take a look at my screen shot, and tell me where I'm going wrong? The recovery image is on my desktop, so I'm not sure what exactly I should be replacing "path" with. I tried it from the link, and how you have it in your note. You don't have the "/to/" after path as in the CM link.

Well I tried a couple more times, and I can get it to seemingly do it, but it just hangs on this: (see screen shot) I get no error, and if I try to enter recovery on the phone I still get the reboot to the android and triangle with the ! in it.

place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk

And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".

n1newbie said:
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
tommert38 said:
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
Click to expand...
Click to collapse
WOW Thank you both. I spent literally hours yesterday trying to get it to work. Tried your suggestions, and in five minutes it was up and running!
---------- Post added at 12:31 PM ---------- Previous post was at 11:33 AM ----------
I may have spoke too soon. I followed the instructions to the end. Installed the ROM, and rebooted, but now after the X I get the Spazdog splash screen with the big Z in the middle and green dots moving, but it stays there forever. I waited 20 minutes one time. Tried reflashing, but I get the same thing.
---------- Post added at 01:17 PM ---------- Previous post was at 12:31 PM ----------
Just giving an update on progress (in case someone else is in my boat too) Flashed back to stock GB. Reinstalled recovery, and reflashed Spaz. Got past the X, and the splash screen, but now it's stuck on the Android logo that looks like the night rider beam that goes across the word. Been there now for about 10 minutes.

You do have Blackrose, right?

Yep. Installed everything according to OP. I think it may be the partition sizes as I think flashing back to GB messed with them. It says 220 and 10, but after checking some threads, it looks like there is one missing (userdata). I tried flashing a custom GB from here http://forum.xda-developers.com/showthread.php?t=1214543&page=98 and I was able to install everything. Got it up and running, so I'm going to start over for ICS, or do you think I can flash one of these for ICS http://forum.xda-developers.com/showthread.php?t=1637166 , and then just flash the ROM after?

220/10 means that you have 220MB for system and 10MB for cache, everything that's left will be userdata, so it doesn't ask (total is ~436MB, so userdata will be ~206MB in that case).
In HBOOT you can check how large your partitions are, or you could use the FreeSpace app for example. Always make sure your system partition is large enough before flashing a ROM.

tried to install JB, used Blackrose = can't get into recovery

Hello Folks,
I'm still stuck with my nexus one since I don't care that much about phones.
I've seen that jelly bean roms have made a significant progress. Thus I decided to give it a shot.
I started with installing adb and fastboot. :good: After that I rooted the nexus one :good: I've used this how to:
c2med blog, can't post links...
Next, I ran blackrose. :good: I saved the rom on the micro sd. Having done all the preperations I wanted to flash the JB rom.
I started the phone in bootloader mode but - unfortunately - couldn't access the recovery mode (ext4). I only get the Android figure and an exclamation mark.
In the how-to it sais i should use fastboot to flash the recovery made by ext 4.
Problem # 1: Ext4 generated a .zip, not a .img file
Problem # 2: I connect the device in fastboot mode, navigate to the adb/fastboot folder and use ./fastboot devices. The phone is recognized and I see the serial number. Next I try "flash recovery...." but I only get "command not found". Now, I basically have no idea what to do.
Which recovery should I flash? And how?
I'm so looking forward to your answers.

Androdicct said:
Hello Folks,
I only get the Android figure and an exclamation mark.
Which recovery should I flash? And how?
Click to expand...
Click to collapse
What you get is the stock recovery.
Flash 4Ext recovery or Amon RA recovery ( fastboot flash recovery recovery-RA-passion-v2.2.1.img)
Among the several guides to install JB, I suggest you to look at the following post:
http://forum.xda-developers.com/showthread.php?t=1804571
I just finished this morning the following process:
install RA recovery,
install Blackrose and resize partition,
install from SD card Evervolv-Perdo-3.2.0-Nightly-2013.01.13-passion.zip
install from SD card gapps-ev-jb-20120816.zip
I spent a lot of times reading and trying. I had an issue after installing Evervolv-perdo-3.1.0final-passion zip. That's why I switched to the Nightly (JB 4.2).
Once you are set install a2sd from within the terminal emulator on your N1.
In my opinion this is so far the best ROM I ever have had on my Nexus 1.:good:
I am impressed to the extend that I offer to my wife to do the same on her N1. She said no. No to unlock, no to root and of course no to custom ROM.
Good luck

Hi,
thanks for your reply. Thats basically what i did as well. But after using Blackrose i can't go into the recovery mode.
I used the same tutorial. The problem lies here:
"Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip."
It seems like I am unable to understand what I am supposed to do. Could somebody give me a step by step advice? I would prefer using some other recovery.img than mine...

Androdicct said:
Hi,
thanks for your reply. Thats basically what i did as well. But after using Blackrose i can't go into the recovery mode.
I used the same tutorial. The problem lies here:
"Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip."
It seems like I am unable to understand what I am supposed to do. Could somebody give me a step by step advice? I would prefer using some other recovery.img than mine...
Click to expand...
Click to collapse
It happened to me. I just re-flashed Amon RA recovery from the fastboot mode. Maybe somewhere you missed a step?

gunner1937 said:
It happened to me. I just re-flashed Amon RA recovery from the fastboot mode. Maybe somewhere you missed a step?
Click to expand...
Click to collapse
Okay I see. Could you give me the exact steps for the fastbood method? :angel: And where did you get the recovery?
Cheers!

Androdicct said:
Okay I see. Could you give me the exact steps for the fastbood method? :angel: And where did you get the recovery?
Cheers!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611829 : read posts #15 and #16.
In other words open your folder android-sdk-windows installed on the root of your C: hd. Click on the folder platform-tools and download Amon RA recovery in this folder. Left click anywhere on a blank area of this folder then press the key Shift (keyboard) and right click your mouse. In the drop down menu select Open command window. In the CMD, to be sure that the N1 is recognized by the pc (meaning the right drivers are installed) type ADB devices and press enter. You should see a string of numbers like HT9C......
Type adb reboot bootloader and press enter. You are in the fastboot mode ( and mood if I may say so) and the phone shows that it is in the bootloader. You can check again that N1 is recognized by the pc by typing fastboot devices. Same string appears.
Type fastboot flash recovery recovery-RA-passion-v2.2.1.img.
After the installation is completed boot in recovery, select Flash zip from sdcard, select the ROM you have dropped on the card. When the installation is completed go back to Flash zip from sdcard ( you are still in recovery mode) and select the gapps you have dropped on the sdcard.
Go back to Reboot system now. You are then out of the recovery and it takes some times for the N1 to boot to this beautiful JB
Edit:
http://forum.xda-developers.com/showthread.php?t=1804571 this is for posts #15 & #16

Androdicct said:
Okay I see. Could you give me the exact steps for the fastbood method? :angel: And where did you get the recovery?
Cheers!
Click to expand...
Click to collapse
As c2med posted in his guide, sometimes, people lose their recovery when they repartition using Black Rose. Hence, its always best to have Amon-RA or 4EXT flashable .img file in your PC so that incase you lose recovery, you can always flash it back.
Once you are in bootloader ( also called FASTBOOT mode) you can flash your recovery.
Then reboot into recovery from FASTBOOT (Shutdown and then restart using the recovery combination)
Once you are in recovery, follow the steps in c2med's guide (wipe cache/dalvik/etc - except sd-card ofcourse) and flash your ROM from sd card.
Then reboot into JayBee

In the screenshot you type:
$ ./fastboot devices
then you type:
$ flash recovery ......../recovery.img
Command not found.... Sure, flash it's not a command...
You need to type fastboot command first!
$ ./fastboot flash recovery ......../recovery.img

jolinnard said:
In the screenshot you type:
$ ./fastboot devices
then you type:
$ flash recovery ......../recovery.img
Command not found.... Sure, flash it's not a command...
You need to type fastboot command first!
$ ./fastboot flash recovery ......../recovery.img
Click to expand...
Click to collapse
Thank You! That's what I figuered out last night. Of course I also tried "fastboot flash" but forgot the "./". That was the key. Now the JB ROM works like a charm.
New Problem:
I can't install google apps. In fact I don't really need them. I only use a few apps and found the .apk files with google. Unfortunately the "official" Google apps like chrome don't work.
Plus, I wanted to install the camera (laggy in the evervolv - rom) and keyboard from here.
http://forum.xda-developers.com/showthread.php?t=1965290&page=38
When I try to install the .zip files in recovery mode I always get an error because of the signing... any help?

Androdicct said:
When I try to install the .zip files in recovery mode I always get an error because of the signing... any help?
Click to expand...
Click to collapse
When you're in recovery, select "Flash zip from SD card" and then select "Toggle signature verification" to disable signature verification, and then "Choose zip from SD card" and navigate to the zip file that you want to flash.

How to Root Android 5.0 (LRX21O) for Nexus 5

Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
_______________________________________________________________________________
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...

Thank you for posting this. I tried three other methods to get root back before this, and none of them worked. This one did the trick without any problems at all. Thanks again!

Wug's Nexus Root Toolkit 1.9.4

kyoshiro22 said:
Wug's Nexus Root Toolkit 1.9.4
Click to expand...
Click to collapse
I know there's Toolkit's out there, but this is for those who choose to take the "Fastboot" approach.

gestevez1213 said:
Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP[ - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...
Click to expand...
Click to collapse
This is NOT working.... I tried it 3 times on 2 devices

papayayoghurt said:
This is NOT working.... I tried it 3 times on 2 devices
Click to expand...
Click to collapse
What part are you stuck at?

For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.

I used chainfires auto root for the N5 (stock lollipop Boot loader). Worked great. Just download to a PC put phone into boot loader and run the bat file. I can't link but a quick google will find it for you.
Sent from my Nexus 5 using Tapatalk

andrelessa said:
For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.
Click to expand...
Click to collapse
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?

Personally, I'm using the autoroot from chainfire. Works like a charm, no custom recovery is needed (I have the stock recovery).

gestevez1213 said:
What part are you stuck at?
Click to expand...
Click to collapse
Everything is working, but then SuperSU can´t find a Binary.

gestevez1213 said:
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?
Click to expand...
Click to collapse
Yes, I read somewhere that TWRP need this...

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Are you running the official lollipop release? It should work with that. Delete the app, and try again.

Just put your phone in bootloader and run cf-autoroot from windows if you dont want twrp.

I have twrp but its not working like that

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Had the same issue and needed to flash the updated kernel from chainfire : https://www.androidfilehost.com/?fid=95747613655047375

Why are you trying to do this the hard way? Just use chainfire's autoroot.
It works perfect and it's literally one command
fastboot boot CHautoroot.img (or whatever the file name is)

cf-auto-root is the way
I agree, just use cf-auto-root. You should be good to go in no time.
Just for FYI, if you already have unlocked bootloader, it won't wipe your data, if you are concerned.
CF-auto-root roots N5 without modifying your kernel. I believe, if you flash the SuperSU in TWRP, it would modify the kernel. It's nothing bad, but if you want to remain "stock" and don't want to reflash stock ROM later to get the OTA, just use "Full unroot" from SuperSU app and you are stock and ready for next OTA.

I have encrypted the storage on my Nexus 5. Will CF-Auto-Root wipe my storage?

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
I have the same error.