Hello here I come,
I've made my own kernel first (ZeroGravityKernel) then i was thinking to make my own ROM, and here you go, i made it and i wanna share it with you
~~CREDITS~~
-rrgrrg
-nooby
-androguide.fr
-zeppelinrox
-AcrosDev
-eagleeyetom
-Mick2K
-nicholaschw
-Huexxx
-nunogil
-DooMLorD
-gabwerkz
-N00BY0815
~~ROM SPEC~~
Code:
-deodexed
-zippaligned
-init.d tweaks
-bravia engine 2
-Xlaud+Clear Sound
-Beats Audio libraries
Also i've included my kernel
~~KERNEL SPECS~~
Code:
-Gpu OC (275 mhz)
-Cpu OC ( 1100 mhz , with those freq: 200/400/700/1000/1100 mhz)
-Compiled with linaro ( a plus of optimization's/performace)
-Governors: smartassV2/interactiveX/ondemandX/ondemand/performance/lionheart/savagedzen/lagfree/aggressive/conservative)
-I/O Scheldulers: CFQ/DEADLINE/NOOP/SIO/VR
-undervolted
-wifi undervolted
-LED's Dimmed
~~TIPS~~
1) If setup winzard is not showing just press HOME button
2) Use this kernel settings for best balance performance/battery:
Max cpu freq: 1100 mhz ( or 1000 )
Min cpu freq: 200 mhz
Governor: SmartAssV2
I/O: VR
3)If deep sleed is not working the use " Deep Sleep Battery Saver" from market
~~DOWLOAD~~
v1.0 -DOWNLOAD
For my kernel for CM10/CM10.1 go here
i've tried many of your kernels so i'm definately going to try your rom.
wil give feedback in some time.
Pollie81 said:
i've tried many of your kernels so i'm definately going to try your rom.
wil give feedback in some time.
Click to expand...
Click to collapse
thnaks
xLoud, beats and BE working? Are you sure about it? I just req a pic with BE and without BE on lgp970
pkb_always4u said:
xLoud, beats and BE working? Are you sure about it? I just req a pic with BE and without BE on lgp970
Click to expand...
Click to collapse
yes, they should work
edit:
i can't get a pic now...
does the kernel in this ROM same with ZGK v1.0? If it different, can you share the kernel only?
suggestion: can you implement G-recovery for next version?
Can you delete 1000 mhz? And why VR is default?
Odp: {ROM}[STOCK-ICS-V30B]ZGRom
What is your battery and antutu results?
Wysłane z mojego LG-P970
t0g3 said:
does the kernel in this ROM same with ZGK v1.0? If it different, can you share the kernel only?
suggestion: can you implement G-recovery for next version?
Click to expand...
Click to collapse
Yes is diff
matbla91 said:
Can you delete 1000 mhz? And why VR is default?
Click to expand...
Click to collapse
Why to disable it?....yeah is default
Sent from my LG-P970 using xda premium
andr00ib said:
Yes is diff
Why to disable it?....yeah is default
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
Can you share kernel only? Coz ZGK v1.0 still not stable for me, it reboot to recovery if I set max 1200, and 3D test only around 600 on antutu
If it stable for me, I'm gonna try this ROM
Sent from my LG-P970 using Tapatalk
Sounds cool but I saw in your footer that you don't use it yourselfe:
Device: LG Optimus Black
ROM: CM10
KERNEL: ZeroGravityKernel (by me)
CWM: CWM v6.0.1.4
Is that right or did you just forgot to update it?
What about your kernels . will you continue to develop ics kernel ?
Can you add some screens for us?
matbla91 said:
Can you delete 1000 mhz? And why VR is default?
Click to expand...
Click to collapse
damn boy, you got some realy great questions..
d1rekt0r said:
What about your kernels . will you continue to develop ics kernel ?
Click to expand...
Click to collapse
why don't ask in the right topic?
Tigress said:
Can you add some screens for us?
Click to expand...
Click to collapse
why? it's not themed, it's just stock rom..
d1rekt0r said:
What about your kernels . will you continue to develop ics kernel ?
Click to expand...
Click to collapse
I think he just did, OK that is a ROM with a kernel and not just the kernel but ask him in his other thread and he might release the kernel alone.
SaschaKH said:
Sounds cool but I saw in your footer that you don't use it yourselfe:
Device: LG Optimus Black
ROM: CM10
KERNEL: ZeroGravityKernel (by me)
CWM: CWM v6.0.1.4
Is that right or did you just forgot to update it?
Click to expand...
Click to collapse
I forgott to update it...lol..
Yes i will release kernel tonight....
edit
i've arrived from school now, and i will upload kernel now.
Sent from my LG-P970 using xda premium
here it is,
kernel only :
download me, i'm the kernel lol
EDI:
starting from the ground on V30b/V30C open source kernel code, a new build, with all previous features....
suggestion ; adding more freq levels (800, 850...)
Q ; do you plan to theme it ?
Ilko said:
suggestion ; adding more freq levels (800, 850...)
Q ; do you plan to theme it ?
Click to expand...
Click to collapse
it's a little bit hard to add more freq, i tried alot off time's and i can't get just 1 more freq...1100 one...:| if i add more freq it will not boot, is a segmentation fault...:|
about theming, i don't think so, but if you want, you could create theme's, ad i will post it there, and give to you proper credit's...
AW: {ROM}[STOCK-ICS-V30B]ZGRom
andr00ib said:
it's a little bit hard to add more freq, i tried alot off time's and i can't get just 1 more freq...1100 one...:| if i add more freq it will not boot, is a segmentation fault...:|
about theming, i don't think so, but if you want, you could create theme's, ad i will post it there, and give to you proper credit's...
Click to expand...
Click to collapse
im not a dev and i dont know anything about developing
but why zeus has add more freq without problems on his gb rom?
Gesendet von meinem LG-P970 mit Tapatalk 2
Related
░█░ [Tweaks] To improve the speed and stability [flashable] ░█░ V08░█░
After a lot of testing, i came with these tweaks to improve the speed and stability for the Arc.
i collect these tweaks inside flashable file: ( thx to knzo )
Increase overall touch responsiveness
internet speed tweaks
microSD card speed tweak
825 mV for the first freq ( -75mV for all freq )
875mV(for devices not stable with 825mV)
zipalign on boot.
Render UI with GPU
Disable debugging notify icon on statusbar
VR I/O Scheduler as default
interactive CPU governor as default
Max speed - screen off 576 MHz
The Best RAM Optimization by Juwe.
Stereo sound in Video record
3G tweaks ( receiving become better )
& more...
Download V8:
(v08) small fix + support 2.3.4
(v07a) nothing new but no bootloop for some people they have already my old patch
(v07) i just remove some lines making the phone lagy after a heavy use
http://www.mediafire.com/?ni6ot0cwcdk4k
Installing :
Via Clockwork Recovery
make a backup before flashing.
if you put any file in system\etc\init.d\ *make sure to delete it before flashing.
How do you revert if you need to ?
Sent from my LT15i using Tapatalk
If i use this patch, then i dont need anymore SetCpu? Right...
dondavis007 said:
How do you revert if you need to ?
Sent from my LT15i using Tapatalk
Click to expand...
Click to collapse
do a backup first and if it doesnt work recover it
dondavis007 said:
How do you revert if you need to ?
Sent from my LT15i using Tapatalk
Click to expand...
Click to collapse
Most of the patch are added to Build.prop so make a backup of your Build.prop you you can revert it back. Rest are the scripts that goes under Init.d folder. So you could deleted the script and reboot the device.
Hope this helps!
Tried both of them and both of them give me problems
My phone restarts especially in between phone calls
Sent from my LT15i using XDA App
Tried replacing the prop file and removing the scripts from init.d folder
Still having probs wid da constant reboots
Any solution.?
Sent from my LT15i using XDA App
lil_devil said:
Tried replacing the prop file and removing the scripts from init.d folder
Still having probs wid da constant reboots
Any solution.?
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
It might be the voltages, check this out http://forum.xda-developers.com/showpost.php?p=16735211&postcount=524 and try to adjust the voltages.
ShyamSasi said:
It might be the voltages, check this out http://forum.xda-developers.com/showpost.php?p=16735211&postcount=524 and try to adjust the voltages.
Click to expand...
Click to collapse
Is there any way to undo all the changes instead...Atleast if i know what else has been changed maybe i can revert to my original files
lil_devil said:
Is there any way to undo all the changes instead...Atleast if i know what else has been changed maybe i can revert to my original files
Click to expand...
Click to collapse
do a backup from recovery first then try this tweek..i also have prob with this and constant reboot...so i restore back to my backup after that...the backup will restore back to your original setting at the time you made the backup...
click thanka if this help....
lil_devil said:
Is there any way to undo all the changes instead...Atleast if i know what else has been changed maybe i can revert to my original files
Click to expand...
Click to collapse
i think if some one flash the the last boot.img again it's will reset the voltage to default .
i will checl that !
taaviu said:
If i use this patch, then i dont need anymore SetCpu? Right...
Click to expand...
Click to collapse
yes, you don't need for it . only if you want to do somthing else .
if i may ask : whats the benefit of rendering the UI with the GPU? lol
realfelix said:
if i may ask : whats the benefit of rendering the UI with the GPU? lol
Click to expand...
Click to collapse
frees up your RAM if I remember right.
hanifh said:
frees up your RAM if I remember right.
Click to expand...
Click to collapse
More flow I presume? Isnt this why the iPhone doesnt stutter?
Sent from my LT15i using Tapatalk
The 825 seems stable at first glance for my Arc. Still use SetCPU btw to set the speeds to 0.122/1.5GHz and Smartassv2 governor. Will try the package for a few days to see speed/battery/memory.
Btw, does this make the v6 supercharger memory management obsolete? Or does is still work?
UPDATE: I can say the phone is stable at the above speeds. I don't really notice a difference in battery/speed/memory, but maybe it's due to irregular usage. I had no speed or memory issues before so maybe it can't be better.
I haven't done any flashing of rom (still afraid to do that hehehe) but i would like to share the things i added on my build.prop
I'm in Singapore - Singtel Carrier
(no more dropping the 3G signal while on call)
ro.ril.enable.dtm=1
(faster lock of gps satellite in my exp)
ro.ril.def.agps.mode=1
ro.ril.def.agps.feature=1
(not for speed hehe just to add 3g prefix somewhere. couldn't find any diff)
ro.ril.enable.3g.prefix=1
Is it will work with neo?
Sent from my MT15i using Tapatalk
skupi20 said:
Is it will work with neo?
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Yes. But I recommend to add the manually. Because in the the Build.prop might be for Arc. Check this thread http://forum.xda-developers.com/showthread.php?t=1233878
How on earth do you even get recovery on ARC in the first place ?
or this is some other recovery you guys are talking about ?
why didn't anyone post up their experiences with this yet ?
Disclaimer :
I am not responsible if you brick, break, blow up, drop, lose, or get your device pregnant. Everything you do is your responsibility.
This kernel is only made for the GT-P6810 WiFi only Tablet, It is not compatible with Locerra CM9 nor CM10, and it may not work on everyone's device. I'm not a real developer and I don't know how to fix your device if you break it!
This kernel is forked (a direct copy to be more specific) from the EzyICS Kernel v1 and I thank again Ezynow for his hard work. I took his changes from his topic and adapt this kernel to the P6810. Actually, I took the .config and compare line by line which was for the P6800 and which was for the P6810. So, I disabled all the gsm/modem devices.
This kernel is not perfect and needs be to improved so don't be harsh if there's some kind of problem. I've tested it again tonight and I did not brick or whatsoever other problem... I'll list on the features which one are working and tested and others which don't.
There's only one file to download and flash it with the locerra's cwm. So, you have to install locerra's cmw first ! See below
Bugs
None known yet
Features
Removed MMC_CAP_ERASE (BrickBug) (tested ok) like Dedrak's one I did this :
Code:
//mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
mmc->caps |= MMC_CAP_SDIO_IRQ; // Brick Bug Fix
Built from GT-P6810_ICS_Opensource_Update1.zip;
Support for bootanimation. Place the bootanimation.zip in /system/media folder.
Various compiler optimizations (neon, cflags :-O2 -fomit-frame-pointer etc.) (Debug stuff remains for now but will be taken after some more mods are added);
Mali state tracking disabled;
/etc/init.d/S* script support (Add here your tweaks / ramscripts from custom roms etc.) (tested ok)
Added Governor :
Pegasusq (by default) - (recommend as it deals better with multi-cpu devices like our tabs but may require some tweaking)(tested ok)
interactive;
lulzactive;
lulzactiveq;
smartassV2;
hotplug.
I don't know if these governors will suit to our tab and they need to be tested.
Overclocking Support up to : 1600 mhz. It test further but the tab was not stable enough and as Ezynow said : ICS changes how frequency control is implemented so not as easily overclockable as honeycomb was. Fixed CPU Boot Up frequencies to default values / not overclocked settings (tested ok)
Undervolting Support:
Same frequencies as Eznow used : 200 / 500 / 16000 hz (As these are the most used)
So far running pretty stable on:
Code:
1600 mhz -------------------> 1300mv
1400 mhz -------------------> 1250mv
1200 mhz -------------------> 1175mv
1000 mhz -------------------> 1075mv
800 mhz ---------------------> 1000mv
500 mhz ---------------------> 875mv
200 mhz ---------------------> 875mv
ALL DEVICES will have different values but these values gave by Ezynow worked for me. Use SetCpu to change voltages or cpu overclocks. (tested ok)
Slightly undervolted GPU voltages and thus reduced by 50mv for default GPU levels. (tested ok)
in built CIFS support. Changed Max_BUFFER Size to max 130084 (Thanks to Pinkowl for first supporting this).
In cifs options put: rsize=130048. (tested ok)
NFS share mounting. (not tested)
UDF & ISO support - i.e native bluray disk support. (not tested)
Here is information on it This is configurable using a tool known as NSTools on the PlayStore. When using this 100% means the bus frequency is at 100% try not to get confused. So 100% of 100MHz would be 100MHz so if you increase it to 120% so it would be 120% of 100MHz would be 120MHz and this value applies to all CPU frequencies, GPU ect.
Compatibility listIt seems to work on all stock ICS releases or derived custom ROMs.
CM9 - Not working;
CM10 - Not working;
XXLPL - Tested: (tested ok)
InstallGo into CWM.
Make a nandroid backup.
Install zip from sdcard.
ProblemsGo into CWM-> Advanced restore -> restore boot.
Changelog:v1.1
Default cpu scaling governor set to pegasusq (siyahkernel version).
Enabled bootanimation;
pegasusq cpu scalling governor added (siyahkernel version : more stable);
interactive cpu scalling governor added;
lulzactive cpu scalling governor added;
lulzactiveq cpu scalling governor added;
smartassV2 cpu scalling governor added;
hotplug cpu scalling governor added.
v1
First release (see features)
DownloadsP6810 wifi only
Stock Kernel XXLPM : Download
v1: Download (2012-08-23)
v1.1: Download (2012-09-24)
Special Thanks
Ezynow (of course)
Chainfire for his work
Locerra to be the first on the 7.7
UpInTheAir (who was very supportive)
Dedrak to be the first user of my tutorial
gokhanmoral for his governor's tweaks
And others on this forum
If you want to add features or just want to ask questions feel free to do it
Oh nooo I on P6800..
If I on P6810...will whack this on my Tab
Nice...keep it up mengpo, any chance for P6800?
I have a suggestion for the Pegasusq governor. You could perhaps tweak it according to siyah kernel like on the sgs2?
Astrix Ashburn said:
Oh nooo I on P6800..
If I on P6810...will whack this on my Tab
Nice...keep it up mengpo, any chance for P6800?
Click to expand...
Click to collapse
The P6800 is available for a while now see this thread and have a good flash : http://forum.xda-developers.com/showthread.php?t=1807193
lambstone said:
I have a suggestion for the Pegasusq governor. You could perhaps tweak it according to siyah kernel like on the sgs2?
Click to expand...
Click to collapse
Ok I'll seek into this Have you got any link where I can read some stuff ?
Thanks
mengpo said:
The P6800 is available for a while now see this thread and have a good flash : http://forum.xda-developers.com/showthread.php?t=1807193
Click to expand...
Click to collapse
Yup..I been using it since it release till now
Thinking you can put up more tweak..etc? I will flash it
mengpo said:
Ok I'll seek into this Have you got any link where I can read some stuff ?
Thanks
Click to expand...
Click to collapse
I really can't remember if there was any link describing the pegasusq governor when it was first introduced but however, the link below is for the sources. not really sure if it will be of any use to you though. perhaps some features could be implemented over?
https://github.com/gokhanmoral/siyahkernel3
there are also some information about the ICS kernel for sgs2
http://forum.xda-developers.com/showthread.php?t=1572937
lambstone said:
I really can't remember if there was any link describing the pegasusq governor when it was first introduced but however, the link below is for the sources. not really sure if it will be of any use to you though. perhaps some features could be implemented over?
https://github.com/gokhanmoral/siyahkernel3
there are also some information about the ICS kernel for sgs2
http://forum.xda-developers.com/showthread.php?t=1572937
Click to expand...
Click to collapse
Thanks for the links I'll try to tweak a bit more this kernel to do the same the SGS2
Hi Mate,
Great to see the development you've made! Excellent work :good:
Still away right now and hopefully missus will have sorted out a place to stay (and ADSL) by the time I return.
Need to (want) to get started on a new ROM build for P6810 (P6810XXLPM), but that won't happen for 2 weeks.
Would love to take your kernel for a run then
Keep it up
I have many self-reboots with this kernel... What can I do?
diamond_lover said:
I have many self-reboots with this kernel... What can I do?
Click to expand...
Click to collapse
Simple. Don't use it. This is just the first version created by Mengpo and is bound to have issues here and there. I'll wait for him to post an update (whenever that happens) before evaluating and trying it.
diamond_lover said:
I have many self-reboots with this kernel... What can I do?
Click to expand...
Click to collapse
Are there just random or when you use a specific app ?
lambstone said:
Simple. Don't use it. This is just the first version created by Mengpo and is bound to have issues here and there. I'll wait for him to post an update (whenever that happens) before evaluating and trying it.
Click to expand...
Click to collapse
I got some issue with my internet connexion and got some problem with my computer too... The update could take a while... Well I'll see with dedraks if I could use some help
wrong post.
mengpo said:
Are there just random or when you use a specific app ?
I got some issue with my internet connexion and got some problem with my computer too... The update could take a while... Well I'll see with dedraks if I could use some help
Click to expand...
Click to collapse
Just installed stock -> CWM -> kernel, then I boot up, then I have random reboots (and the speakers make a little sound like click click click..)
diamond_lover said:
Just installed stock -> CWM -> kernel, then I boot up, then I have random reboots (and the speakers make a little sound like click click click..)
Click to expand...
Click to collapse
Did you undervolt or overclock the tab with that kernel ? (using setcpu or else)
mengpo said:
Did you undervolt or overclock the tab with that kernel ? (using setcpu or else)
Click to expand...
Click to collapse
nope, just fresh installed... that's weird..
diamond_lover said:
nope, just fresh installed... that's weird..
Click to expand...
Click to collapse
Hummm yup that's weird... I'm looking into it
diamond_lover said:
nope, just fresh installed... that's weird..
Click to expand...
Click to collapse
I did an update and changed the scalling governor (pegasusq with pagasusq (siyah version). I think the problem went from there and thus you won't have this random reboot issue.
good luck !
The v1.1 download link seems bad; says file is deleted.
Also anyone use this on Skyfire Rom, which seems based on the same stock firmware?
mengpo said:
I did an update and changed the scalling governor (pegasusq with pagasusq (siyah version). I think the problem went from there and thus you won't have this random reboot issue.
good luck !
Click to expand...
Click to collapse
Nice, I'll try, but I can't download, could you check the link?
Thanks in advance.
diamond_lover said:
Nice, I'll try, but I can't download, could you check the link?
Thanks in advance.
Click to expand...
Click to collapse
I don't know what happened... I've updated the link
Version
0.30 (beta): Mediafire | Dropbox
1.0 (initial relesae): Mediafire
1.25 (i'm released with my custom rom) [ROM][GT-S5300] ELASYS ROM For Samsung Galaxy Pocket
1.50:Dropbox
1.50 overclock: Mediafire
PLEASE DON'T MIRROR LINK
Changelog
Changelog
version 1.50
remove smartass governor
add bootsplash
add 936 MHz and 1.2GHz Frequencies
fix backup and restore vMOO CWM
version 1.25
add zRAM support
remove ramzswap
add random bootanimation, random bootsound and CWM
other feature can you find on elasys cusrom thread
version 1.00
init.d support
add 5 i/o scheduler
add more governor
version 0.30
Droidwall support
Swap suupport
Credit
Allah SWT
My Family and my girlfriend
alfyian.sys
savie, for governor module
Maroc-OS, for source
Elasys Developer Team
Galaxy Pocket FB Community
vMOO, for his CWM
and you
Source
See My Github Foe souce Code
Reserved for any update
great job buddy
berlangganan thread
narindra.ibay said:
great job buddy
Click to expand...
Click to collapse
thx bro
cleverior.ipul said:
berlangganan thread
Click to expand...
Click to collapse
okey..
Thanks
thnks for the kernel sir :good:
anyway.. good job
keep up the good work !
Nice work
nice man! overclock for sgp! great job, thanks
amaaaaaaaaaaaazing
iamflip said:
nice man! overclock for sgp! great job, thanks
Click to expand...
Click to collapse
My friend say, overclock is not working
AndikaTedja said:
My friend say, overclock is not working
Click to expand...
Click to collapse
overclock is working, i mean the value is working but not the performance though..
and my sgp shutdown frequently with this kernel when i'm not using my phone, i have to turn it on always, so i uninstall it and problem solved no automatic shutdown hehe
maybe i will use it again after some updates thanks..
iamflip said:
overclock is working, i mean the value is working but not the performance though..
and my sgp shutdown frequently with this kernel when i'm not using my phone, i have to turn it on always, so i uninstall it and problem solved no automatic shutdown hehe
maybe i will use it again after some updates thanks..
Click to expand...
Click to collapse
haahahah my friend said that too, just value is working
Is this really tweaking the performance? Btw, thanks for the kernel!
nice kernel, but the problem here is the autoshutdown my brother was using the phone and suddenly turned off. my brother was really furious.
Sent from my GT-I9300 using xda-developers
iAlexander said:
nice kernel, but the problem here is the autoshutdown my brother was using the phone and suddenly turned off. my brother was really furious.
Sent from my GT-I9300 using xda-developers
Click to expand...
Click to collapse
iamflip said:
overclock is working, i mean the value is working but not the performance though..
and my sgp shutdown frequently with this kernel when i'm not using my phone, i have to turn it on always, so i uninstall it and problem solved no automatic shutdown hehe
maybe i will use it again after some updates thanks..
Click to expand...
Click to collapse
just set governor to lionheart if you got 'dead' phone
Sent from my GT-S5300 using Tapatalk 2
Sir ,, hats off!!!
riskey95 said:
Version
0.30 (beta): Mediafire | Dropbox
1.0 (initial relesae): Mediafire
1.25 (i'm released with my custom rom) [ROM][GT-S5300] ELASYS ROM For Samsung Galaxy Pocket
1.50:Dropbox
1.50 overclock: Mediafire
PLEASE DON'T MIRROR LINK
Click to expand...
Click to collapse
You sir are a ROCKSTAR!!!!!,, thank you,,,,
just a doubt,, overclocking will not overheat and destroy my phone right
mvsdroid said:
You sir are a ROCKSTAR!!!!!,, thank you,,,,
just a doubt,, overclocking will not overheat and destroy my phone right
Click to expand...
Click to collapse
If you are using OC is not too often, I guess it's not a problem.
cleverior.ipul said:
If you are using OC is not too often, I guess it's not a problem.
Click to expand...
Click to collapse
if you OC your phone untill 1.2 GHz
if u use it for 3 hour and your phone will boooommmmmm
AndikaTedja said:
if you OC your phone untill 1.2 GHz
if u use it for 3 hour and your phone will boooommmmmm
Click to expand...
Click to collapse
wkwkwkwkwkwk
LOL
kernels work properly on both IZS & ICS
main features: swap & zram support, undervolting, wided frequencies' scale 200Mhz-1.1Ghz
swap usage is strongly not recommended, as it causes lags in UI, zetram, otherwise, is almost a musthave.
wonna announce in advance, that dafna_v4.* would be (soon, i hope) on the latest 3.9.4 stable linux sources.
dafna _v3.3:
haven't changed a byte in code - only trickstering with linaro's commandline parameters.
results could be seen by eye; according to tests dafna_v3.3 makes now on lionheart even larger figures than diana_0.3 did on performance.
necessary tunings (without them rom would lag or even become unstable/freezed): lionheart, bfq, cache 2Mb, aggressive OOM, seeder, zram.
sicdezmond (from 4pda.ru) suggests that it may be usefull before installing this version to wipe cache & dalvik.
dafna_v3.2:
v 3.1 + additional undervolting of 800 Mhz.
rebuilt on the latest versions - android-ndk-r8e & gcc 4.7, theoretical and/or practical achivements of this rebuilding had to be finded yet.
due to the widely known gcc 4.7 bug, wifi module does not compile properly (any help or ideas for any workaround would be greatly appreciated), but module from the previous version of dafna could be just copied to /etc/wifi (proper permissions 755 had to be checked/set, of course).
overall feeling: it's much quicker and has lower power consumption than dafna_3.1.
necessary tunings (without them rom would lag or even become unstable/freezed): lionheart, bfq, cache 2Mb, aggressive OOM, seeder, zram.
dafna_v3.1:
v3 + upper limit changed to undervolted 1.1 Ghz according to lgeob's (from 4pda.ru) idea of frequency's changeling.
necessary tunings (without them rom would lag or even become unstable/freezed): lionheart, bfq, cache 2Mb, aggressive OOM, seeder, zram.
dafna_v3:
v2 + tuned undervolting + changing of lowest frequency to 20Mhz (also added upper limit 1.1Ghz is recognized, but not used by the system).
necessary tunings (without them rom would lag or even become unstable/freezed): lionheart, bfq, cache 2Mb, aggressive OOM, seeder, zram.
Historical review:
dafna_v2:
v1+ undervolting of wifi + disabling ipv6 + disabling ethernet in company with a pair of not needed TCP protocols.
dafna_v1:
based on diana_v.3 by Huexxx, swap + zram, light undervolting after lgeob's ideas, disabling of most of the kernel's debugging.
Does this work on izs (4.0.4)?
Sent from my IZS Black with XDA App.
thanks for showing a missing point in description, edited.
kernels were tested on izs 0.2, izs 0.4, ics 30b-f.
Will give a try...
Sent from my IZS Black with XDA App.
It works on trasmusic ics rom too.
Btw how to set up those tunables?
I know about governors but dunno which app is compatible with the kernel.
Edit: nvm I just tried trickster mod and it works ok for now.
Grakel said:
It works on trasmusic ics rom too.
Btw how to set up those tunables?
I know about governors but dunno which app is compatible with the kernel.
Click to expand...
Click to collapse
any app you like.
the simpliest and easiest way is to set it up with the init.d scripts (seeder, of course, had to be only installed).
as to the apps - android tuner, android trickster, no-frills CPU (for example) - most of them can tune partly required, but none can tune all mentioned.
Great job mate.I'll test it on Trasmusic v30f.Hope that oc is stable
Edit: Instable for me.Games are force closing and some apps too
Sent from my LG-P970 using Tapatalk 4 Beta
adm_ said:
any app you like.
the simpliest and easiest way is to set it up with the init.d scripts (seeder, of course, had to be only installed).
as to the apps - android tuner, android tricster, no-frills CPU (for example) - most of them can tune partly required, but none can tune all mentioned.
Click to expand...
Click to collapse
On my izs worked 100% with all tunes...
Thanks man, great job,:laugh:
Please, share your sources. It's mandatory, even more if you are using my repo.
Regards.
Huexxx said:
Please, share your sources. It's mandatory, even more if you are using my repo.
Regards.
Click to expand...
Click to collapse
Oh my.
Sent from my LG-P970 using xda app-developers app
Huexxx said:
Please, share your sources. It's mandatory, even more if you are using my repo.
Click to expand...
Click to collapse
they were already shared - it's just a two-move problem, shocked a little that you didn't solved it yourself. ;-P
adm_ said:
they were already shared - it's just a two-move problem, a little shocked that you didn't solved it yourself. ;-P
Click to expand...
Click to collapse
Sorry but I don't catch you...
Can U put the link on OP?
Huexxx said:
Sorry but I don't catch you...
Can U put the link on OP?
Click to expand...
Click to collapse
The kernel source is published in the original thread, on those russian forums.
I grabbed the link, here it is:
https://github.com/admzzz/dafna
Huexxx said:
Sorry but I don't catch you...
Can U put the link on OP?
Click to expand...
Click to collapse
Hey ur back!
Sent from my LG-P970g using Tapatalk 4 Beta
Huexxx said:
Sorry but I don't catch you...
Can U put the link on OP?
Click to expand...
Click to collapse
just guessing, what you do not know how to use - hyperlinks or browsers? ;-P
there is one already (it's there from the beginning of my post, btw), try to follow it and read carefully - URLs are in plain english, if you haven't heard it before. ;-P
adm_ said:
just guessing, what you do not know how to use - hyperlinks or browsers? ;-P
there is one already (it's there from the beginning of my post, btw), try to follow it and read carefully - URLs are in plain english, if you haven't heard it before. ;-P
Click to expand...
Click to collapse
No need to be so sarcastic.
And no, there is no direct link to github in your OP.
The only link present in your OP is a russian webpage, where there IS a link to github.
So I know, it was just two clicks to get the github link, but could you post it also in the xda thread OP? Its not such a hard task, isnt it? =)
Grakel said:
So I know, it was just two clicks to get the github link, but could you post it also in the xda thread OP? Its not such a hard task, isnt it? =)
Click to expand...
Click to collapse
no, it is, if you wonna check some mental abilities of others. ;-P
have a nice day, folks, as i just got one.
adm_ said:
no, it is, if you wonna check some mental abilities of others. ;-P
have a nice day, folks, as i just got one.
Click to expand...
Click to collapse
Wth dude... are you on your period?
Halleluja he is alive
Gesendet von meinem LG-P970
Please leave the fights,and give feedback about the kernel to people interested.
N-KERNEL for Xperia™ T
an advanced stock based kernelMAIN FEATURES
BASE
LATEST 9.1.A.1.145 KERNEL SOURCE
LATEST 9.1.A.1.145 RAMDISK
KERNEL:
FREQUENCIES
GPU
128,200,300,400
450
480
CPU
192
270
384,432,486,540,594,648,702,756,810,864,918,972,1026,1080,1134,1188,1242,1296,1350,1404,1458,1512
1674
1728
1809
1890
SOUND
Support for faux123's Sound Control
I/O SCHEDULERS
ZEN
V(R)
SIOPLUS
SIO
FIOPS
DEADLINE
NOOP
CFQ
CPU GOVERNORS
Smartmax (combined ondemand & smartassv2)
Hyper (tweaked ondemand based smart and smooth optimized governor)
Lazy
Dancedance
Intellidemand
Badass
Lionheart
Lagfree
Wheatley
Interactive,Conservative,Userspace,Powersave,Ondemand,Performance
GPU GOVERNORS
Simple
Interactive
Ondemand, Performance
POWER
Force USB Fast Charge (will disable sdcard mount to PC when enabled)
Undervolting support (voltage control)
RAMDISK:
RECOVERY (after vibration or LED light up)
TWRP Recoverey 2.5.0.0
VOL+ at boot
CWM-based Recovery 6.0.2.7
VOL- at boot
BOOT LOGO
Custom text with the original SONY logo
DEFAULT.PROP
Debuggable
Insecured
INIT.D
Execution of custom scripts in /system/etc/init.d/* during boot
- Custom features & values will normally not be applied at boot. Unless you configure init.d or an app of course.
CHANGELOG
v1.4.0
No changelog..
BUGS
USB storage mount in recovery does not work..
REQUIREMENTS
Xperia T on official 4.1.2 or any ROM based on it
Unlocked Bootloader (from here)
Optional:
An app for kernel management (Trickster MOD (recommended), SetCPU, etc.)
INSTALLATION
Copy to sdcard
Flash the .zip via any recovery
- If you don't have recovery, or if you prefer via fastboot-
Extract kernel.elf from the .zip
Move to a folder including fastboot
Shift + Right click the folder and open it in command prompt
Connect your phone, turned off, while holding VOL+ button. Blue LED should appear now.
Code:
fastboot flash boot kernel.elf
Code:
fastboot reboot
DOWNLOAD
v1.4.0
https://www.mediafire.com/?ef5b6u4kq0c5fcz
SOURCES
kernel: sony_kernel_msm8960
ramdisk: unpack kernel.elf from the .zip
CREDITS- DooMLoRD for his handle multiple recoverys based on volume keypress script!
- And for his perl script for kernel.sin extraction!
- gokhanmoral for undervolting.
- TeamWin, Dees_Troy (and championswimmer) for TWRP.
- championswimmer for his kernel kitchen, making it easy to convert PNG to RLE
- $Reserved_for_people_i_forgotXDA:DevDB Information
NK for Xperia™ T, a Kernel for the Sony Xperia T
Contributors
NuriJ, peetr_
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: v1.4.0
Stable Release Date: 2013-11-20
Created 2013-12-16
Last Updated 2013-12-16
Mine
Really glad to be the first.
Nice work. Thanks.
This kernel seems nice
Could make kernel for tx?
Very awesome..
Sent from my LT29i using xda app-developers app
wow cool, thank you very much. didn't expect a new kernel, will test tomorrow
Gesendet von meinem LT30p mit Tapatalk 2
Thank you for a version of T. We should expect to TX?
Could you make a CM10.1 version of this Kernel?
Would be great:thumbup:
Sent from my Xperia T using xda app
Duvel999 said:
Could you make a CM10.1 version of this Kernel?
Would be great:thumbup:
Sent from my Xperia T using xda app
Click to expand...
Click to collapse
And for cm10 and MIUI. Please!
Отправленные с моего Xperia T с помощью Tapatalk 4 Beta
Could make kernel for TX?
Many thanks
Nurij, can I bother you with some requests?
I am not going to overclock gpu, because it's the main source of heating, but there are some things I would like to try.
First thing is, that 325MHz breaks sysmon gpu perflevel switching, because default step is 300MHz. I could change it in sysmon.cfg but I want to leave it compatible with stock kernel.
But as I've tested these frequencies much, I know that two extra steps would be really usefull. Except of 128/200/300/400 steps, adding 250 and 350 would be nice.
Especially 250 MHz, because 300 is enough, but 200 is slow.
What do you think?
sinnadla said:
This kernel seems nice
Could make kernel for tx?
Very awesome..
Sent from my LT29i using xda app-developers app
Click to expand...
Click to collapse
nnmka said:
Thank you for a version of T. We should expect to TX?
Click to expand...
Click to collapse
lucky92 said:
Could make kernel for TX?
Many thanks
Click to expand...
Click to collapse
I will consider it.. What's the latest firmware version for TX?
peetr_ said:
Nurij, can I bother you with some requests?
I am not going to overclock gpu, because it's the main source of heating, but there are some things I would like to try.
First thing is, that 325MHz breaks sysmon gpu perflevel switching, because default step is 300MHz. I could change it in sysmon.cfg but I want to leave it compatible with stock kernel.
But as I've tested these frequencies much, I know that two extra steps would be really usefull. Except of 128/200/300/400 steps, adding 250 and 350 would be nice.
Especially 250 MHz, because 300 is enough, but 200 is slow.
What do you think?
Click to expand...
Click to collapse
I see... So this is the table you have in mind?
128
200
250
300
325
350 (or 365 would be better?)
400
(and overclocked ones)
I think 325 is not needed, but the frequency table can look exactly like that (with 350).
Thank you.
peetr_ said:
I think 325 is not needed, but the frequency table can look exactly like that (with 350).
Thank you.
Click to expand...
Click to collapse
Looks like we already got 266MHz in the 8960 table, its just not in use
Im testing the values atm..
Great. You don't have to hurry. Tomorrow will be fine.
NuriJ said:
I will consider it.. What's the latest firmware version for TX?
9.1.B.1.67 is latest FW
Thx.
Sent from my LT29i using xda app-developers app
Click to expand...
Click to collapse
NuriJ said:
I will consider it.. What's the latest firmware version for TX?
Click to expand...
Click to collapse
Latest version of TX firmware is 9.1.B.1.67
NuriJ said:
I will consider it.. What's the latest firmware version for TX?
I see... So this is the table you have in mind?
128
200
250
300
325
350 (or 365 would be better?)
400
(and overclocked ones)
Click to expand...
Click to collapse
I think your kernel is one of the best ever. We, Xperia TX (LT29i) community, suffers of a lack of developpement. We'll be glad if you could make a similar kernel for the last 9.1.B.1.67 FW for Xperia TX. If it is useful, here is original 9.1.B.1.67 kernel: http://d-h.st/SCS Thanks in advance for your kindness.
Thanks for your work! I'm trying the kernel this night. The hyper governor seems to be nice...
really nice kernel, no wifi drops as with doomkernel and it also feels smoother, even with many apps.
using the dancedance governor, thanks for your work
Gesendet von meinem LT30p mit Tapatalk 2
After a day using this kernel, i can say by the momment works perfectly, very smooth and i have noticed absolutely no lag.
I was using the doomkernel that was very nice as well, but this is simply awesome.
Good job!:good: