Related
I have been testing the N1 for a few days, and just making sure there aren't any hardware issues before I void the warranty (possibly) through unlocking the bootloader and flashing a ROM. I would like to know if it is possible to revert to a factory settings ROM with exactly the "out of the box" settings and OS.
Backup: Unlock, install a RA-nexus recovery, save current ROM to SD, save settings with a backup app.
Restore: Start RA-nexus, recover ROM from SD, do factory settings wipe.
Is this correct?
Currently you can't relock the bootloader, you can revert everything apart from this. It does void your warranty but apparently HTC have been decent about fixing rooted N1s with hardware defects anyhow.
justin2net said:
I have been testing the N1 for a few days, and just making sure there aren't any hardware issues before I void the warranty (possibly) through unlocking the bootloader and flashing a ROM. I would like to know if it is possible to revert to a factory settings ROM with exactly the "out of the box" settings and OS.
Backup: Unlock, install a RA-nexus recovery, save current ROM to SD, save settings with a backup app.
Restore: Start RA-nexus, recover ROM from SD, do factory settings wipe.
Is this correct?
Click to expand...
Click to collapse
As @nDrg said, you can't relock the bootloader, but you can restore the phone completely to the stock ROM... download the EPE54B stock ROM, rename it to PASSIMG.zip, copy it to the SD card, enter bootloader mode. The phone will find the zip and ask you if you want to apply the update... this will restore everything to the stock EPE54B ROM
Didn't work for me, please help...
Hello,
I tried to place the above listed file on my SD (tried the one from the link on your sig, and one from another source) and could not get it to recognize the file from bootloader, nor could I flash it from zip (via recovery).
I have been searching for a way to revert to stock ROM for days now (and I have been researching) and I can't seem to find a way that I can get to work. (I am running both cyanogenmod 5.06, and modaco's sense - switch back and forth with the RA revovery screen). I can't connect reliably to wifi on either, and want the option to go back to stock.
I'm very much new to Android (and the Nexus) thus I'm probably just missing some things that are obvious to more advanced users.
I was hoping that you might be willing to post a step by step guide to reverting to stock for newbies? (Explain each step, eg. I barely know what fastboot is). Or, do you know of a guide that you could point me (and others I'm sure) to?
One might ask why I rooted and modded my device when I did not understand enough of what I was undertaking to reverse the process. One would be absolutely correct in such a question! That being said, if anyone is willing to help, it would be much appreciated.
Thanks so much,
Randy
Just curious why you'd want to go back to stock?
prettyboy85712 said:
Just curious why you'd want to go back to stock?
Click to expand...
Click to collapse
@prettyboy85712:
I do love both cyanogenmod and modaco's sense rom, but I haven't been able to connect via wifi on either for quite awhile (though normal network connection works fine). To be more specific, if I have been able to connect via wifi without the sim card in the phone, but not with it inserted.
As well, it seems like a good idea to be able to revert to stock if I did need to (stock updates, etc.) and I'd like to try wifi with stock, to see if it's the phone or the ROM. (My fault for not figuring out how to do this before I modded )
Thanks so much,
Randy
if u want to go completely back where u still receive ota (minus the locked bootloader that u can't change that its unlocked) u can download the signed secure nexus 1 Rom from modaco and then flash the boot,system,and recovery.img though fast boot go to nexus one forum and search rolling back to stock Rom it gives detailed instructions on how to do it I did it to make sure it works and was simple it is and u even get ota updates from Google hope this helps if u need any help just send me a pm good luck let us know how it goes
-------------------------------------
Sent from my Nexus One
Ok so I got my hero about a month ago and upgraded to 2.1 last week. Terrible decision...wish I could take it back...but I hear that if you root your phone and use a custom ROM you can actually have a pretty decent experience with your phone using 2.1 I can't even list how many problems and how slow 2.1 is.
I do not know a lot at all about rooting a phone, I never have before, and the tutorials on unlocker seem to be out-dated with the 1.5 software so nothing is working for me. I have the ADP setup on my computer, I'm just wondering what's the easiest and most up to date way to root my Sprint HTC Hero so I can use a custom ROM. Any help is appreciated, thank you.
**If your software/build number (2.27.651.X) ends in 6, you must download and run this RUU first to be able to use the root exploit on your phone. If it ends in .5, skip this and click the link in the next sentence.**
Try this and if you follow it correctly, you'll be able to root your phone and be able to nandroid, and flash custom roms and what not.
Final note, all of the user data/settings on your phone will be reset, so it will be like having a brand new phone out of the box. Just an FYI.
Thank you I have successfully rooted my phone...but I'm having trouble connecting to the internet now. I cannot receive any weather data and have no internet connection at all.
I"m having the same problem, even after I set back to factory default. Not sure what I did wrong.
Gnfghtr said:
I"m having the same problem, even after I set back to factory default. Not sure what I did wrong.
Click to expand...
Click to collapse
What problem(s) are you having in particular? Not being able to root?
Hi All,
Before I ask my question, I just wanted to clear up that I've searched the forums (both on the s3 i9300 and i9305 sub forums,) and there's so much info that I got a little more confused and lost my confidence, which is why I'm asking here before I start the procedure.
I've just realized that my power button is starting to wear causing a 'bootloop' when I press it 7 times out of 10, and I have the opportunity to get it fixed under warranty.
Now, I've been running custom software since June 2013 and my phone is an Australian Telstra i9305T, and I have made a backup on the ROM pre-rooted when I installed CWM (although I'm not sure that it may work, as the bootloop have corrupted my SD card, there's a few backups that didn't have the same MD5 and can't be run.)
I wanted to make sure that the steps I unroot and reset counter to 0 for warranty would be:
1) Go to CWM
2) Wipe the cache/memory.(factory reset.)
3) Install the rom I backed up in May 2013
4) Triangle Away to set counter to 0.
5) Use the Unified Android tookit's unroot function.
Does that sound right? Or have I missed any steps.
FYI I had the phone inspected at the Samsung Experience store but the lady had threw a tantrum as she noticed I was running custom software, and pretty much refused to talk to me, (she wasn't even a tech, but I guess got upset on tampering principle,) so I want to make sure when it goes back to the techs it's ok to get fixed.
Any help I can get here would be appreciated.
Thanks in advance folks.
grungypoo said:
Hi All,
Before I ask my question, I just wanted to clear up that I've searched the forums (both on the s3 i9300 and i9305 sub forums,) and there's so much info that I got a little more confused and lost my confidence, which is why I'm asking here before I start the procedure.
I've just realized that my power button is starting to wear causing a 'bootloop' when I press it 7 times out of 10, and I have the opportunity to get it fixed under warranty.
Now, I've been running custom software since June 2013 and my phone is an Australian Telstra i9305T, and I have made a backup on the ROM pre-rooted when I installed CWM (although I'm not sure that it may work, as the bootloop have corrupted my SD card, there's a few backups that didn't have the same MD5 and can't be run.)
I wanted to make sure that the steps I unroot and reset counter to 0 for warranty would be:
1) Go to CWM
2) Wipe the cache/memory.(factory reset.)
3) Install the rom I backed up in May 2013
4) Triangle Away to set counter to 0.
5) Use the Unified Android tookit's unroot function.
Does that sound right? Or have I missed any steps.
FYI I had the phone inspected at the Samsung Experience store but the lady had threw a tantrum as she noticed I was running custom software, and pretty much refused to talk to me, (she wasn't even a tech, but I guess got upset on tampering principle,) so I want to make sure when it goes back to the techs it's ok to get fixed.
Any help I can get here would be appreciated.
Thanks in advance folks.
Click to expand...
Click to collapse
the steps are quite in good order. you dont have the new bootloader with knox i guess.. cause that would be a problem if the knox counter is triggered you cant set it back to 0, there is still no way found to restore knox counter for devices with new bootloader. everyone who has void knox warranty status can forget about sending device to samsung for repair for any reason!
if you havent flashed recently a new 4.3 firmware from sammobile or samsung-updates.com, you probably have the old bootloader which is good.
if you were not rooted when you made the backup in may 2013, then you will automatically be unrooted when restoring backup otherwise you would need to unroot after the backup restore. the backup will restore it to its state exactly how it was in may 2013. after the restore of backup go in odin downloadmode and check what info does it give in the left upper corner about system and binary status, should be both showing official and for the flash counter use triangle away indeed but keep in mind that it does not always restore to 0, sometimes it restores to 1 and thats no good.
MaHo_66 said:
the steps are quite in good order. you dont have the new bootloader with knox i guess.. cause that would be a problem if the knox counter is triggered you cant set it back to 0, there is still no way found to restore knox counter for devices with new bootloader. everyone who has void knox warranty status can forget about sending device to samsung for repair for any reason!
if you havent flashed recently a new 4.3 firmware from sammobile or samsung-updates.com, you probably have the old bootloader which is good.
if you were not rooted when you made the backup in may 2013, then you will automatically be unrooted when restoring backup otherwise you would need to unroot after the backup restore. the backup will restore it to its state exactly how it was in may 2013. after the restore of backup go in odin downloadmode and check what info does it give in the left upper corner about system and binary status, should be both showing official and for the flash counter use triangle away indeed but keep in mind that it does not always restore to 0, sometimes it restores to 1 and thats no good.
Click to expand...
Click to collapse
Yeah.. I think I rooted the phone before the knox bootloader came out for my phone, although I can't remember as it was a year ago.
So I guess at this stage the steps I'd take here would be:
1) Triangle away to reset counter to 0
2) Go into CWM clear the memory, and put in the unrooted image.
I've now got another question on the steps:
1) Currently using Triangle away, the counter only stays at 1, and every time I boots it shows the red '!' on the top left corner. That's not knox is it? And if it isn't, when I flash the unrooted image, will it get rid of it?
2) How do to revert to the regular stock recovery, as I've installed CWM. Or will the unrooted image handle that... if I recall the steps to rooting is installing custom recovery (CWM in my case) then taking the image with CWM then rooting then installing custom software.....
Again thanks for you help, I hope you can see where I get confused, I love this forums it's got so much help but sometimes it's hard to work out what to filter to make things go smoother.
grungypoo said:
Yeah.. I think I rooted the phone before the knox bootloader came out for my phone, although I can't remember as it was a year ago.
So I guess at this stage the steps I'd take here would be:
1) Triangle away to reset counter to 0
2) Go into CWM clear the memory, and put in the unrooted image.
I've now got another question on the steps:
1) Currently using Triangle away, the counter only stays at 1, and every time I boots it shows the red '!' on the top left corner. That's not knox is it? And if it isn't, when I flash the unrooted image, will it get rid of it?
2) How do to revert to the regular stock recovery, as I've installed CWM. Or will the unrooted image handle that... if I recall the steps to rooting is installing custom recovery (CWM in my case) then taking the image with CWM then rooting then installing custom software.....
Again thanks for you help, I hope you can see where I get confused, I love this forums it's got so much help but sometimes it's hard to work out what to filter to make things go smoother.
Click to expand...
Click to collapse
1. i dont know about the ''red !'' but it seems like you have done something wrong, it shouldnt show something like that..
the backup img might solve it, but dont now for sure
2. to revert back to stock recovery you could do this: flash official firmware with odin OR find a flashable stock recovery .img or .tar md5 file to flash in recovery. easiest way is to flash official firmware, that will restore everything to ''out of the box state'' and for the counter using triangle away (only thing is it restore's it to 1 instead of 0 )
if you ask me how i would make this whole thing ready and steady for sending to samsung, i would do this:
assuming here that i have old bootloader without knox, the steps would be for me in this order:
- put every personal stuff in internal or external sd to my pc temporary
- reset flash counter with triangle away
- go in cwm recovery and wipe everything, i mean really EVERYTHING. after that put phone off and go in downloadmode
- download the official firmware that my phone came with (for me that was android 4.1.2 no KNOX!) when first bought, and flash that with odin. now i have installed official firmware with stock recovery and device status is official and counter reset to 0 or 1
everything restored back to normal except the counter that stays on 1 unfortunately ready to send for repair, but i doubt they will accept it
i do understand your confusion about what to do, as in many threads people telling their own way of handling and taking steps to get things done and that can be very confusing as there are many things one could do. when trying to help people, i always try to provide the most common solutions and most easy one, but no matter how i tell and explain if you are someone who does not know much about android development kind of things, you will have always difficulties. the key for understanding is lots of READING and RESEARCH followed finally by executing what you have learned with proper tools. im just a member for couple of months now but i have followed these forums for many years and im glad i did..
MaHo_66 said:
1. i dont know about the ''red !'' but it seems like you have done something wrong, it shouldnt show something like that..
the backup img might solve it, but dont now for sure
2. to revert back to stock recovery you could do this: flash official firmware with odin OR find a flashable stock recovery .img or .tar md5 file to flash in recovery. easiest way is to flash official firmware, that will restore everything to ''out of the box state'' and for the counter using triangle away (only thing is it restore's it to 1 instead of 0 )
if you ask me how i would make this whole thing ready and steady for sending to samsung, i would do this:
assuming here that i have old bootloader without knox, the steps would be for me in this order:
- put every personal stuff in internal or external sd to my pc temporary
- reset flash counter with triangle away
- go in cwm recovery and wipe everything, i mean really EVERYTHING. after that put phone off and go in downloadmode
- download the official firmware that my phone came with (for me that was android 4.1.2 no KNOX!) when first bought, and flash that with odin. now i have installed official firmware with stock recovery and device status is official and counter reset to 0 or 1
everything restored back to normal except the counter that stays on 1 unfortunately ready to send for repair, but i doubt they will accept it
i do understand your confusion about what to do, as in many threads people telling their own way of handling and taking steps to get things done and that can be very confusing as there are many things one could do. when trying to help people, i always try to provide the most common solutions and most easy one, but no matter how i tell and explain if you are someone who does not know much about android development kind of things, you will have always difficulties. the key for understanding is lots of READING and RESEARCH followed finally by executing what you have learned with proper tools. im just a member for couple of months now but i have followed these forums for many years and im glad i did..
Click to expand...
Click to collapse
Okay, so now what you're telling me, which is contrary to what I've been reading previous to this is that there is no way to get the phone back to stock for warranty repair as they won't accept it due to the counter being at 1.
(Would this be knox?)
Thanks for your answers tho', I really appreciate them usually my posts get ignored, prolly filed under the "another noob" section.
The thing is I'm not that much of a noob, I just have a hard time trying to put all the info together so I can take the most optimal and risk adverse solution. As for reading and research, xda is a great forum but I can keep reading 8 hours a day for 3 months and keep going because as you said everyone has their own way of doing things and explaining things.
Maybe it's not worth for me to send my phone under warranty if they're going to reject it anywaysy... *sigh*
Despite not being able to help a lot, I would just like to chime in that I have the little red exclamation mark aswell, and I have never installed the Oficcial 4.3 with Knox. So at least its not related to that.
I do have a custom Recovery and I am running a Rooted stock image.
The exclamation mark has not caused me any issues though..
found this as well: http://forum.xda-developers.com/galaxy-s3/help/red-line-exclamation-mark-left-wupper-t2011728/page2
timmtn said:
Despite not being able to help a lot, I would just like to chime in that I have the little red exclamation mark aswell, and I have never installed the Oficcial 4.3 with Knox. So at least its not related to that.
I do have a custom Recovery and I am running a Rooted stock image.
The exclamation mark has not caused me any issues though..
found this as well: http://forum.xda-developers.com/galaxy-s3/help/red-line-exclamation-mark-left-wupper-t2011728/page2
Click to expand...
Click to collapse
Well it definitely does help, so thanks.
Can I ask if you've sent your phone in for warranty repairs?
I think it has to do with having custom recovery.
grungypoo said:
Well it definitely does help, so thanks.
Can I ask if you've sent your phone in for warranty repairs?
I think it has to do with having custom recovery.
Click to expand...
Click to collapse
Unfortunately not (for you, fortunately for me).. My first i9305 actually had a defective power button which died the day after I got it. I had rooted it already, but was able to roll the original image back on the phone before handing it in. The store swapped it right away for a new one though, so it never turned into a repair case.
So about 3 months ago when i got my phone i used titanium backup to freeze my system update app, and i then rooted my phone. Today i wake up and my phone tells me it wants to update to ZV6 from ZV5, now i know that if i update my phone being rooted that i risk bricking it. So my question is can i use the ZV5 restore to reset my phone even though if i reboot the phone it might update or how should i go about reseting my phone to stock before updating it, or how should i go about unrooting so that it does not update on me and brick my phone. Any help will be much appreciated
just an update really quick
So going through my system i have found the update.zip file that matches the size the update screen is telling me about, what i wanted to also know is can i just cut the update.zip to my external sd card and that way i have a backup and then when i get home reboot my phone into recovery so that i can restore it to stock, and not risk it updating on me if i dont press the button fast enough. I really need some advice here cause i do not know what i can and can't do with this phone. i used to mess around with an s4 alot before so i have a really good understanding of how to find things in the system, so any advice is good advice. so just let me know thanks a bunch
G870A, Soft Bricked, Need 4.4.4 or 5.1.1 completely stock "Unrooted" firmware file
EDITED 12-27-15:
XDA Assist has sent me to this forum (Thanx). Info and questions follow, here are the basic details:
G870A variant of the samsung S5 (Active)
Stock, unrooted, carrier locked
interrupted power during OTA update from AT&T (most likely 5.1.1)
forced phone into "download mode" and attempted to flash 4.4.2 (NE4) instead of update (actual file used: G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5)
Phone stuck in bootloop with freeze/repeat at AT&T logo
unable to locate completely stock firmware file for 4.4.4 (G870AUCU1AOA1 or OA2) to flash back to most recent functional OS.
still currently able to force recovery mode or download mode.
**update:
As far as i know, the OTA for 5.1.1 did completely download but i dont think it "installed" because i removed battery during initial auto-reboot. The existing ROM would have been 4.4.4 mentioned above, updated and active official firmware from AT&T.
Basic Explanation of actions: I do fully realize that my actions and subsequent "incomplete" attempt to patch the software were unwise but i was merely weeks away from paying off the phone, owning it, having it unlocked by AT&T, properly rooting and installing a custom ROM (as i had successfully done to my wife's G900A). In a moment of panic, not wanting to be locked out of my phone forever by Lolipop, I ripped out the battery during the reboot that was loading Lolipop... every time I put the battery back in and hit power, the phone still attempted to load and write 5.1.1. So I thought maybe, the official firmware copy from 4.4.2, which my phone shipped with in 2014, might flash, even though i was not rooted or unlocked. Clearly i was mistaken but it was all i could think of under pressure.
At this point, I am Completely unconcerned about almost all data on phone or even the hardware EXCEPT for some extensive "memo" notes, which i desperately want to recover. I also dont care anymore about avoiding Lolipop because the memo data is more important to me. I am literally willing to rip the internal memory from this phone and send the SD to a data forensics company if that's what it takes, i no longer care about the phone at all... Having said that, recovering it myself and keeping the phone might be nice also.
Question: where might i find a completely stock firmware for 4.4.4 factory, UN-rooted,to flash; or what procedure might i use to directly pull data from the phone, while soft bricked, before doing a full factory reset?
Alternately, any advice on directions i may not have thought of yet?
I have looked pretty deep into the existing XDA forums for this info but i am only finding "custom ROMs" which are rooted or factory stock ROMS for 4.4.2 and most advice deals with rooting, then flashing. I am not rooting but simply flashing fully unrooted stock firmware AND starting in a bootloop/soft brick state. This is why i did a fresh thread.
Thanks in advance to anyone who might be able to help!
rtlarkin said:
Hello XDA Assist! After reading the stickies, i see that you may be able to direct me to the correct forum in which to post my main question. Here are the basic details:
G870A variant of the samsung S5 (Active)
Stock, unrooted, carrier locked
interrupted power during OTA update from AT&T (most likely 5.1.1)
forced phone into "download mode" and attempted to flash 4.4.2 (NE4) instead of update (actual file used: G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5)
Phone stuck in bootloop with freeze/repeat at AT&T logo
unable to locate completely stock firmware file for 4.4.4 (G870AUCU1AOA1 or OA2) to flash back to most recent functional OS.
still currently able to force recovery mode or download mode.
Completely unconcerned about all data on phone or even the hardware EXCEPT for some extensive "memo" notes, which i want to recover.
Question: where might i find a completely stock firmware for 4.4.4 to flash; or what procedure might i use to directly pull data from the phone before doing a full factory reset?
Alternately, advice on directions i may not have thought of yet.
Thanks a bunch!
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. To get you the expert help you need, I'm going to move this thread to the most relevant Q&A forum for your device. Good luck!
Hello,
I am not an expert or anywhere close but I understand the basics of Android flashing / rooting, etc.
I happened to have rooted my G870A from AT&T successfully using a thread from XDA and I noticed they also provided the original firmware for G870A in case of problems:
http://forum.xda-developers.com/att...to-root-g870aucu1aoa1-4-4-4-2-7-2015-t3025119
So I thought this may help you considering you're looking for an original firmware for your G870A.
What I suggest is to try to flash "G870AUCU1ANE4_Full_Odin.tar" (available from the thread I linked above, I didn't want to rip the links out of the thread) using Odin v3.09+.
I did not use this firmware to root my G870A (only used the updates) but everything worked on the first try.
Follow instructions in the thread I provided. If that still doesn't work, you may need an Android expert on the case.
I wish you good luck in your data recovery. And yes, I registered just to post a reply to your thread.
(also: if you want to root your G870A, the thread explains the proper way to do it!)
Appreciate the thought
dapr0b said:
I happened to have rooted my G870A from AT&T successfully using a thread from XDA and I noticed they also provided the original firmware for G870A in case of problems:
http://forum.xda-developers.com/att...to-root-g870aucu1aoa1-4-4-4-2-7-2015-t3025119
So I thought this may help you considering you're looking for an original firmware for your G870A.
What I suggest is to try to flash "G870AUCU1ANE4_Full_Odin.tar"
Click to expand...
Click to collapse
Really appreciate the thought, however, that particular file is the file that i had originally used before posting. i think since my phone was factory locked and unrooted i did not have the permissions needed to basically "roll back" my phone to 4.4.2 but i am not educated enough to be sure of the exact problem flashing that file.
Thanks again for suggesting it though! I am nearing the time when I will just have to give up and send off the internal memory for physical extraction and data recovery
Hello,
I am also not an expert or anywhere close but I understand the basics of Android flashing / rooting, etc.
With that said: Let the OTA happen. You will not lose the files unless you already started a factory reset. Then your sol. You will not be able to root but you have a better chance of retrieving the files you are looking for. The phone is not like a computer. You can't just pull the HD and sent it out. You either already had the 5.0 kernel or the 5.1 kernel loaded before you stopped the process. This makes it impossible to go back. You can only go forward.
Good luck and let us know how you make out.
re: take the OTA
Sgt.CM said:
With that said: Let the OTA happen. You will not lose the files unless you already started a factory reset.
Click to expand...
Click to collapse
Thanks for that idea. the trouble at this point is that im stuck in a bootloop that catches on the att logo. I agree that the only option now is to continue forward. i just need a fully official software newer than 4.4.4 to load through kies or odin. at least i "hope" the newer file will work.
so far i have only been able to find stock ROMs that are rooted, and i dont think i can load a rooted stock ROM onto a carrier locked un-rooted phone.
The part you mentioned about the kernal is probably true. i had not thought of that before.