[Edit, first post and I got the board wrong. -_-. I thought I was in the troubleshooting section, sorry.]
Hello,
I've bought a used Galaxy Samsung GT-P1000 running Froyo.JPJM5, Firmware 2.2, and Kernal 2.6.32.9, 27.7GB internal memory.
My problem is that I can't get the PC to identify the tablet using the USB cable.
What I do and what happens when I plug in the tablet~
(USB Debugging on)
I connect the USB cable into the PC first. I plug the cable into the tablet. A 'USB is connected' notification shows up. I open it, and click mount.
I look at my computer's monitor and there's absolutely nothing showing that it EITHER identified or not! It doesn't even show a popup.
So I went to my Disk Management to check if it was hidden or something. There's nothing. It just shows my regular hard disks and that's it. No mounted anything. I even looked into my Device Manager and all seems working.
(USB Debugging off)
Nothing happens in either the PC or Tablet.
Things I've tried-
1) Enable USB Debugging.
- Plugging in the tablet, restart computer, and then enable USB Debugging while connected.
- Disable USB Debugging, restart computer w/ tablet connected.
- Plug tablet into PC, and then restart tablet. (with USB debugging and not)
2) Get KIES.
3) Uninstall KIES and only download the USB_drivers.exe thing that comes with KIES.
4) Uninstall everything (including drivers) and getting Android SDK + update everything (about 370mb).
5) Install Ubuntu and trying to get it identified + downloaded Android SDK package and updated everything. (also did lsusb- it doesn't see the tablet)
6) Tried each and every USB port in my PC. (10 ports). [Note: My other Android phone works in any of them)
7) Tried my bro's and sis' comp (win7 32bit)
8) Tried my dad's laptop (win7 64bit)
9) I unplugged tablet, placed the memory card(2GB) of my Android phone into it. Plugged it in my computer and yet it doesn't want to see it.
10) I went to a shop because I thought the USB cable is broken or the port hub is broken. The guy took it and plugged it on his PC using my own cable. He identified the problem and said "It needs its software to be updated". I asked how much, and he said $15. **** that ****. If he can do it, I can do it.
Conclusions up until now:
Tablet knows that its getting hooked up by the computer yet it doesn't send any information to the PC letting it know that it's a mounted drive.
USB Cable is fine.
Port hub is fine since it can detect the USB cable on *usb debugging* mode and I can charge the tablet with the USB cable plugged into the charger.
---------------------------------------------
Note: I tried to root it using z4root which doesn't require a USB connection. It doesn't work. It would work and work until the application crashes and I can't re open it as it always crashes after the first try. I tried using the temporary root option and it would load forever. All in all, doesn't work.
Note2: I attached 2 screenshots. One for my Disk Management window showing my partitions while the tablet is connected (and I pressed Mount on tablet). Second, is for my Device Manager window showing that there no unidentified devices and that the USB devices don't show any Android connected, yet on tablet it says it's mounted.
Thanks.
I don't know too much about how to fix windows.
But when you are using ubuntu,
did you put in this line to your /etc/udev/rules.d/51-android.rules
SUBSYSTEM=="usb", SYSFS{idVendor}=="04e8", MODE="0666"
btw, the 51-blabla filename can be 51-xxxxxanything
once done
sudo /etc/init.d/udev restart
plug in your tab to USB port
then if you have your Android SDK, you should have adb?
do
adb devices
does it show your tab?
priyana said:
I don't know too much about how to fix windows.
But when you are using ubuntu,
did you put in this line to your /etc/udev/rules.d/51-android.rules
SUBSYSTEM=="usb", SYSFS{idVendor}=="04e8", MODE="0666"
btw, the 51-blabla filename can be 51-xxxxxanything
once done
sudo /etc/init.d/udev restart
plug in your tab to USB port
then if you have your Android SDK, you should have adb?
do
adb devices
does it show your tab?
Click to expand...
Click to collapse
I did what you just said. There's nothing. :|
Hmm..
Out of idea.
If it isn't recognizing the sd card you could try another one. Format it in the tablet, plug it into the computer, put the update on the sd card and update that way and see if it gets recognized that way.
Sent from my SCH-I815 using XDA Premium HD app
czach5932 said:
If it isn't recognizing the sd card you could try another one. Format it in the tablet, plug it into the computer, put the update on the sd card and update that way and see if it gets recognized that way.
Click to expand...
Click to collapse
What do you mean by 'put the update on the sd card'. What update?
Anyways, what I tried is that I used another SD Card (128MB), placed it in, formatted it in the tablet, and plugged it into the computer. Nothing happened on the PC. :|
'adb devices' doesn't show any devices connected either.
(I wanted to confirm that 'adb devices' is indeed working so I tried plugging my Android phone (ST-GT602) and ran adb devices- it showed it. But not the tablet.)
Is there anything other than z4root to root a phone without a USB connection? Or is there anything that might trigger the tablet to let the PC identify it? For example, is there anything that I can place on the SD Card (through another connection.. using my phone for example), then plug it into the tablet, then run that application?
I don't care if it's for rooting or not. Perhaps it would help.
Why don't you spend that $15 at the shop?
Very curious why it works for him.
Sent from my GT-P1000 using xda app-developers app
You might find the Android update online (ICS to GB) or something like that and try to flash a signed update but if your computer doesn't recognize an Android formatted sd card I'm not sure how you would get the card formatted and then get the information to the card. You might search for the update on your tablet, download it and flash it using stock recovery. Maybe getting it updated might work but I have no idea why an out of date tablet won't show up
Also you could try searching online for modified drivers for the device.
Par that I have no idea. Might have to go back and pay the 15 but I would ask the repair guy if you could watch step by step what he is doing.
Hope the best for you.
Sent from my SCH-I815 using XDA Premium HD app
Related
Hi,
I have rooted my Captivate and now I cant get the device to be recognized in windows 7 (64-bit)
I have tried installing the "SGH-i897_Captivate_USB_Drivers_5_02_0_2" drivers for Win 7 (64-bit); enabled USB debugging on the phone and also selected USB Connected menu to copy files from/to the computer. The PC is able to recognize that a USB device is plugged in but detects it as a Unknown device.
When I manually attempt to install the drivers from device manager, it detects the device as for "Samsung Android USB Composite Device" but ends up saying that the device cannot be started (Code 10).
I have also tried plugging it into a different USB port just to check off a problem with the port.
Appreciate any pointers regarding this.
Thanks
Issue exists with WinXP
Update: I just tried the same on my WinXP (32bit) laptop and still the same issue. This is driving me nuts!
Check the port on your phone and make sure your cable is fully seated. I had an issue once with mine doing the same thing but it was just my cable getting caught on the little slide protector.
Sent from my SAMSUNG-SGH-I897 using XDA App
I did move it to a different port and also as I mentioned above tried it on a different PC. Both have the same problem.
Have you tried the galaxyS drivers?
Grr I cant put links in here for the wiki where its locked.
I installed the "usb_drivers_GalaxyS_x64" drivers and plugged in the phone. It recognized the device correctly and I am able to see the phone in Explorer. I didnt have to enable USB debugging as well.
Thanks for help.
Glad it worked. Watch out for the keys program as well. It we over write the drivers with ones that dont work.
Hi everyone,
I have an AT&T Captivate SGH-i897 (2nd hand) and i can't mount the phone to my laptop (winXP 32bit). When i plug in the cable to the phone and then the PC i get the "device not recognized".I've donwloaded the Samsung drivers from the xda wiki page and extracted them and tried to update the driveres via Device Mng ,but didn't work.Also dl'ed the Samsung drivers 5.0.x instaled ,and still nothing.USB Debugging is on...
So to recap,my top can't recognize the phone('s internal sd card) so plz help ???????
Try this, go into usb settings and choose "mass storage"
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
install kies
I would also recommend trying to fully uninstall all the drivers that associated on your pc with your phone (samsung or otherwise), and then reinstall the drivers before you plug in your phone. Then try to reconnect.
Just covering the basics. Assuming your phone is working correctly.
You have tried multiple USB ports on your computer, particularly those on the back if it's a desktop.
You have installed correct drivers (x86 or x64)
" for the correct operating system.
You have uninstalled the drivers before trying to reinstall.
You've tried to get Windows/ Mac to find them online (assuming you're using versions of OS that support doing that)
You've first tried Kies mini before full version, uninstalling in between. (Kies full version isn't supported for US, there are workarounds, but that's a different discussion)
On the phone you tell the phone to connect 'USB storage' (from the pull down menu after connected or in the settings)
I too am having problems with USB connectivity on a notebook with Win7/64. The usual failure mode is Windows not recognizing the USB device. I have followed ZBigT's basics, step by step and still cannot connect.
FWIW, my registry is awash with Samsung entries, some of which cannot be deleted.
I've even tried the AIO Toolbox application (to install the 64 bit drivers) to no avail.
Any other tips?
Is usb debugging turned off?
o hey guys sry for keeping u waiting,
i menaged to install ginger ,
the problem was my lap....rusty old bucket!!!!
had my friend come over with his lap and it worked like a charm ,
the problem is now i need a new one ;(,
damn
mrhaley30705 said:
Is usb debugging turned off?
Click to expand...
Click to collapse
Yes. Still no love. Have tried:
usb_drivers_GalaxyS_x64
SGH-i897_Captivate_USB_Drivers_5_02_0_2
mini-KIES
Kies
AIO
uninstalling reinstalling each time
When I plug in the Captivate, any of 3 USB ports on the laptop, Windows gives the "Unrecognized Device..." message.
Go to settings/about phone. Look at the very bottom to see what rom you are running.
mrhaley30705 said:
Go to settings/about phone. Look at the very bottom to see what rom you are running.
Click to expand...
Click to collapse
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
mabovalu said:
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
Click to expand...
Click to collapse
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
mrhaley30705 said:
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
Click to expand...
Click to collapse
Thanks for sticking with this. I was able to connect. I as focused on the Registry remnants, but your advice to clear out the Samsung folder in Programs worked. Thank you.
Additional comments: I am now running the Dlev ROM, it's OK, but when I plugged in the USB cable, just to the phone, it launched the Alarm Clock app! So I deleted that.
Then on the first of my four USB ports I got a USB driver failure to install, then the Windows Unrecognized USB device on ports 2 & 3. On port 4 it worked. (This is a Lennovo/Thinkpad notebook.)
I used the usb_drivers_GalaxyS_x64 package as that also worked on my desktop.
Thank you very much.
Hey, everyone, I tried posting about this in the CM7 general discussion thread, but no one seemed apt to respond.
I think this was a problem that popped up in the 60s or 70s in terms of nightlies, but I'm having it again now since around the 155 mark.
I'm on 160 and when I plug my NC into the USB cable, I no longer get any options to connect for file transfers in the notification area. If anyone could help me out with this, I'd really appreciate it. It's just so perplexing and no one seems be having this issue except me. If it's user-side error, that's fine as well, I'd just like to know how to fix it.
1. When you plugged the NC in, did the PC recognize any "removable" drive?
2. In the notification area, did you see any other indication?
3. You run CM7 off uSD or eMMC?
votinh said:
1. When you plugged the NC in, did the PC recognize any "removable" drive?
2. In the notification area, did you see any other indication?
3. You run CM7 off uSD or eMMC?
Click to expand...
Click to collapse
1. No, nothing comes up.
2. The notification area remains blank.
3. I'm running it off eMMC.
Thanks for taking the time, by the way!
If so, unplug the usb cable then replug in a few times and see what happens.
If still nothing, try to use other usb cable.
Oh, btw, have you had Nookcolotweaks app installed?
I do have Nook Tweaks installed, yes. I'm using the cable that came with the Nook, but I'm not sure I have any other cables around.
Do make sure you check OFF the USB Host feature (reboot and reconnect)
I gave that a try, too, but still nothing. So confusing!
Don't be so hard on yourself.
Let try it on different computer if you have.
Also try difference usb cable.
Last, if nothing works, update latest nightly build
When you disconnect and reconnect the nook in testing/trying to get it recognized... unplug usb cable from computer... its made a difference at times.
I know this sounds basic but in applications-settings ensure you have usb debugging checked. Sometimes when flashing different nightlies, settings change.
Sent from my NookColor using Tapatalk
Thanks again for all the help, everyone! I made sure USB debugging was checked and tried unplugging/replugging the cable, but there's still no notification coming up.
A new development:
I tried connecting it to my Windows PC instead of my Linux and it brought up this message that said it didn't recognize the device. I also tried to get ADB to see it and it can't. Does this information help or am I in trouble here?
Next time, do clearly indicate that you are using Linux or Windows. I'm sure many members here are Linux but still far less support than Windows world.
When I provided those suggestions in previous posts, I meant in Windows.
Anyway, back to your issue.
1. "it didn't recognize the device" because of missing adb usb driver. You need to get it installed first in order to use ADB, however it has nothing to do with your usb mass storage function. For now, you don't need to worry about it just yet.
2. Back to my question before, have you seen any "removable" on the PC (Windows)
Along with USB Host uncheck, if still having problem, I would suggest you either downgrade to the earlier versions or wait until tomorrow and update with another nightly build.
Good luck
I have the ADB drivers installed in Windows, as far as I know. I've used it before.
I typed "adb devices" into the prompt and it doesn't see the NC at all. Since one of the nightlies seems to be what prompted this sudden change in connectivity, I guess I'll just hope that one of the new ones can fix it. Thanks again.
Also, Windows doesn't show anything "removable" except for my external HD.
Try to disable usb debugging as you can still use ADB over wifi. This should always put the device to usb storage mode when connected.
arda99 said:
Try to disable usb debugging as you can still use ADB over wifi. This should always put the device to usb storage mode when connected.
Click to expand...
Click to collapse
I tried this out and even ADB wireless can't connect to my device. I even re-installed the ADB drivers in Windows to be sure the problem wasn't on that end.
junkrobot said:
I tried this out and even ADB wireless can't connect to my device. I even re-installed the ADB drivers in Windows to be sure the problem wasn't on that end.
Click to expand...
Click to collapse
If you're using ADB wireless, no need to install any driver on Windows PC, you just need 2 files: adb.exe and AdbWinApi.dll, to connect to Android device.
If you've installed ADB drivers, you might want to remove it as this might mess up usb storage.
arda99 said:
If you're using ADB wireless, no need to install any driver on Windows PC, you just need 2 files: adb.exe and AdbWinApi.dll, to connect to Android device.
Click to expand...
Click to collapse
Alrighty. I have those two. I've connected my NC to ADB both wirelessly and and with the cable in the past, so this should all be straightforward anyhow. It just plain refuses to cooperate.
Go to the Marketplace and download "Nook Color UMS" app. Follow instructions and it will mount properly. I had the same issue used it and it mounts proper through the app.
hi, when Rocket Rom 7 (ics) came out, i installed it. after doing this, when i connected my phone to the pc, the system detects the phone as Samsung_android and shows 2 removable drives in the system. however, if you click on them they dont work
it no longer detects my phone as GT-N7000
what i have noticed: when i connect the usb cable, the phone doesnt show "MTP connection" anymore... instead, it shows USB connected.
what has been done:
flashed rocket rom 10, nogo
reinstalled kies: nogo
reinstalled win7 (yes i actually did that even tho testing on other pcs showed the same issue)
the phone still charges and the only way i can connect my phone to d pc to view files is by clicking "usb storage"
any advice on this?
Uninstall kies, and just install driver (find latest from toolbox on my signature)
use different USB port, and dont use any extensor cable to connect device.
dr.ketan said:
Uninstall kies, and just install driver (find latest from toolbox on my signature)
use different USB port, and dont use any extensor cable to connect device.
Click to expand...
Click to collapse
hi bro... didnt work... i dont think its the driver... its the phone... coz i tested another note, its working fine
My Galaxy Tab has similar issues. I believe it would be due to the architechture of the ROM forcing you to have to mount your device to your computer before being able to load the Device Internal SD, and the External SD.
Click USB Storage when it shows, this should pop up a window which has a Lil android dude, and USB Storage Message with a button stating 'Turn on USB Storage'. After clicking it, you can click 'Turn Off USB Storage' to unmount the device.
thanx for that.. hehe.. i stumbled across it the other day.. at least i can transfer files... but just dont like the fact its not showing...
Wondering if im screwed or if someone can help me, I think the USB port on my Touchpad is gone.
I have been trying to use TP Toolbox but it always fails when finding device.
I have tried 4 different computers (3 Win 7 and 1 Win XP) to recognize the Touchpad as being connected via USB.
Its note a Novacom issue, when I connect the touchpad to the computer I get NO confirmation from Windows that a device is connected, no chime, no listing in the device manager, nothing, years ago I remember that even with no Novacom installed I at least got a notice saying a Palm, Inc device had been connected.
The Touchpad thinks its connected to a charger.
Under Android 4.2, only charging, going to USB connection option and selecting MTP doesnt do anything.
Under Web OS, get a notice that the charger is low capacity, but no option no mount device as USB drive.
Under TWRP when I go to Mount SD card, nothing happens.
The TP charges without any problem otherwise, using wall chargers or the wireless charger.
Any help would be appreciated, otherwise Im stuck on Android 4.2 forever
CYGNUZY said:
Wondering if im screwed or if someone can help me, I think the USB port on my Touchpad is gone.
I have been trying to use TP Toolbox but it always fails when finding device.
I have tried 4 different computers (3 Win 7 and 1 Win XP) to recognize the Touchpad as being connected via USB.
Its note a Novacom issue, when I connect the touchpad to the computer I get NO confirmation from Windows that a device is connected, no chime, no listing in the device manager, nothing, years ago I remember that even with no Novacom installed I at least got a notice saying a Palm, Inc device had been connected.
The Touchpad thinks its connected to a charger.
Under Android 4.2, only charging, going to USB connection option and selecting MTP doesnt do anything.
Under Web OS, get a notice that the charger is low capacity, but no option no mount device as USB drive.
Under TWRP when I go to Mount SD card, nothing happens.
The TP charges without any problem otherwise, using wall chargers or the wireless charger.
Any help would be appreciated, otherwise Im stuck on Android 4.2 forever
Click to expand...
Click to collapse
This should be in [email protected] thread. Not development.
CYGNUZY said:
Wondering if im screwed or if someone can help me, I think the USB port on my Touchpad is gone.
I have been trying to use TP Toolbox but it always fails when finding device.
I have tried 4 different computers (3 Win 7 and 1 Win XP) to recognize the Touchpad as being connected via USB.
Its note a Novacom issue, when I connect the touchpad to the computer I get NO confirmation from Windows that a device is connected, no chime, no listing in the device manager, nothing, years ago I remember that even with no Novacom installed I at least got a notice saying a Palm, Inc device had been connected.
The Touchpad thinks its connected to a charger.
Under Android 4.2, only charging, going to USB connection option and selecting MTP doesnt do anything.
Under Web OS, get a notice that the charger is low capacity, but no option no mount device as USB drive.
Under TWRP when I go to Mount SD card, nothing happens.
The TP charges without any problem otherwise, using wall chargers or the wireless charger.
Any help would be appreciated, otherwise Im stuck on Android 4.2 forever
Click to expand...
Click to collapse
Try a different cable. Make sure it's not an OTG one.
TPtoolbox Troubleshooting video
CYGNUZY said:
Wondering if im screwed or if someone can help me, I think the USB port on my Touchpad is gone.
I have been trying to use TP Toolbox but it always fails when finding device.
I have tried 4 different computers (3 Win 7 and 1 Win XP) to recognize the Touchpad as being connected via USB.
Its note a Novacom issue, when I connect the touchpad to the computer I get NO confirmation from Windows that a device is connected, no chime, no listing in the device manager, nothing, years ago I remember that even with no Novacom installed I at least got a notice saying a Palm, Inc device had been connected.
The Touchpad thinks its connected to a charger.
Under Android 4.2, only charging, going to USB connection option and selecting MTP doesnt do anything.
Under Web OS, get a notice that the charger is low capacity, but no option no mount device as USB drive.
Under TWRP when I go to Mount SD card, nothing happens.
The TP charges without any problem otherwise, using wall chargers or the wireless charger.
Any help would be appreciated, otherwise Im stuck on Android 4.2 forever
Click to expand...
Click to collapse
Video Timecode:
Intro: @ 0:00-0:50
TPtoolbox file confusion and version history v40 @ 0:51
TPtoolbox v41x post 293 @ XDA and recoveries for v41x @ 1:58
TPtoolbox not flashing corrupted files @ 3:44
TPtoolbox volume buttons don't navigate the menu @ 4:14
Alternate install guides for CM11/Android 4.4.x on the HP TP(4G) 5:41
Bricking and Bootloops help starts @ 6:41
Touchpad doesn't charge or turn on when plugged in @ 7:04
Always try using a different USB cable! @ 7:46
Jcsullins TPdebrick Last resort @ 8:00
Bootloop help and fixes @ 8:20
Can't activate WebOS after Jan,15, 2015 @ 9:42
Well for one, as someone said before, make sure you are using a proper USB cable, they aren't all the same, some cheap cables are designed to charge devices but won't work for connecting a device to a computer for data transfer. And also, you need to be in recovery mode for the toolbox to start. Turn the tablet off and then hold the Power + Vol UP until you see the USB symbol appear on the tablet. Connect it to your computer and open the batch file for the toolbox. If you have Novacom properly installed, it should recognize it right away and the toolbox will show up on the tablet.
Thank you to everyone for trying to help but nothing works, I have tried 3 cables so far:
1 that came with a Nexus 5.
The original Touchpad cable with the silver dimple.
A generic cable I have lying around.
Also tried 4 different computers, all same effect.
Does anyone have any other ideas? As I said in the opening post, Touchpad Recovery mode doesnt work, Android USB Mode doesnt work, Web OS USB and TWRP Mount mode the same.
No matter what I do, Windows wont detect that ANYTHING is connected to the USB port, no chime, no entry in the device manager, Novacom installed or not.
CYGNUZY said:
Thank you to everyone for trying to help but nothing works, I have tried 3 cables so far:
1 that came with a Nexus 5.
The original Touchpad cable with the silver dimple.
A generic cable I have lying around.
Also tried 4 different computers, all same effect.
Does anyone have any other ideas? As I said in the opening post, Touchpad Recovery mode doesnt work, Android USB Mode doesnt work, Web OS USB and TWRP Mount mode the same.
No matter what I do, Windows wont detect that ANYTHING is connected to the USB port, no chime, no entry in the device manager, Novacom installed or not.
Click to expand...
Click to collapse
Are you going to sell it?
bryantjopplin said:
Are you going to sell it?
Click to expand...
Click to collapse
Nope, just gonna keep it in this half broken build of Jelly Bean
CYGNUZY said:
Nope, just gonna keep it in this half broken build of Jelly Bean
Click to expand...
Click to collapse
Lol you might be able to replace the USB board inside.
CYGNUZY said:
Thank you to everyone for trying to help but nothing works, I have tried 3 cables so far:
1 that came with a Nexus 5.
The original Touchpad cable with the silver dimple.
A generic cable I have lying around.
Also tried 4 different computers, all same effect.
Does anyone have any other ideas? As I said in the opening post, Touchpad Recovery mode doesnt work, Android USB Mode doesnt work, Web OS USB and TWRP Mount mode the same.
No matter what I do, Windows wont detect that ANYTHING is connected to the USB port, no chime, no entry in the device manager, Novacom installed or not.
Click to expand...
Click to collapse
Have you tried the newer UniversalNovacomInstaller-1.4.1? I've just added into my thread recently. Just incase its a driver issue, sounds like your USB might be fried however:crying:
Download and run the Universal Novacom Installer 1.4.1 here:
Note: You will need to have Java installed to run the Universal installer, click here:
RolandDeschain79 said:
Have you tried the newer UniversalNovacomInstaller-1.4.1? I've just added into my thread recently. Just incase its a driver issue, sounds like your USB might be fried however:crying:
Download and run the Universal Novacom Installer 1.4.1 here:
Note: You will need to have Java installed to run the Universal installer, click here:
Click to expand...
Click to collapse
Thank you so much, I will give it a try as soon as I get home.
Also, is there anyway to upgrade Android on the TP without USB? I could transfer files using FTP or Wi Fi File explorer.
Possible but problematic
CYGNUZY said:
Thank you so much, I will give it a try as soon as I get home.
Also, is there anyway to upgrade Android on the TP without USB? I could transfer files using FTP or Wi Fi File explorer.
Click to expand...
Click to collapse
It might be possible to update your tablet without using the TPToolbox but you may have to manually change some partition sizes. I have an older guide for installing data media builds below that doesn't rely on the Toolbox. However I still recommend doing things like uninstalling android, which you can't do, so the procedure might be hit or miss. If you make a nandroid backup and transfer it to your PC you could attempt it. I've updated some of the links and you can find the newer recoveries at the bottom. Have a look and feel free to ask questions if you plan to attempt it, I'll try to update the info a bit.
[ROM GUIDE]How to install Android 4.4.x Data Media builds on the HP TP(Non-TPToolbox)
RolandDeschain79 said:
It might be possible to update your tablet without using the TPToolbox but you may have to manually change some partition sizes. I have an older guide for installing data media builds below that doesn't rely on the Toolbox. However I still recommend doing things like uninstalling android, which you can't do, so the procedure might be hit or miss. If you make a nandroid backup and transfer it to your PC you could attempt it. I've updated some of the links and you can find the newer recoveries at the bottom. Have a look and feel free to ask questions if you plan to attempt it, I'll try to update the info a bit.
[ROM GUIDE]How to install Android 4.4.x Data Media builds on the HP TP(Non-TPToolbox)
Click to expand...
Click to collapse
Thank you very much for updating the links for me, I really appreciate it, and will give it a try later! :good: