[GUIDE][Script][Tweaks] V6 SuperCharger for HTC Desire C - HTC Desire C

Desire C people!
This stuff is good. Probably you heard about it already, now I tried it and seems to work very well, especially the memory management. Quite a sophisticated tool as far as me noob understand ugh,ugh! :cyclops:
So basically a collection of kernel and memory management tweaks, but has a lot of other like SD card tweaks and maintenance scripts which you can also schedule with SManager. And the download page has some other useful stuff like 3G turbocharger and battery calibrator.
In all it seems like a must have for DC users.
http://forum.xda-developers.com/showthread.php?t=991276
Once you used it a bit it's pretty straight forward and explains everything in details when running the script, and you have the option to "unsupercharge", but have a nandroid backup at hand.
I used two guides, but the first is for Galaxy and the second is less detailed:
http://forum.xda-developers.com/showthread.php?t=1603953
http://forum.xda-developers.com/showthread.php?t=1908505
And for Desire C, check the post below
Many thanks for nikhil16242 for recommending me this, many scripts are in his Customiser already, he would have integrated the whole V6 Supercharger, but Aroma doesn't like it. That would be awesome though!
All credits to zeppelinrox for these truly awesome scripts:good:
One wonders why android doesn't have some of them by default.

V6 Supercharger Install Guide for Desire C
~ v6 supercharger install guide for desire c ~
aka how I have done it, so it's not an absolute one.
zeppelinrox's original thread is here.
Originally Posted by zeppelinrox
What's it do?
It makes your phone FAST... super snappy with better multitasking!
It rearranges and fixes the OOM Groupings and Priorites and lowmemorykiller values.
So basically, it's a COMPLETE MEMORY MANAGEMENT FIX!
It's the ONLY one of it's kind
NO LAUNCHER REDRAWS, faster than ever, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
So fasten your seat belts and enjoy the ride!
Click to expand...
Click to collapse
NOTE: Delete all conflicting scripts from init.d folder, otherwise it will be laggy and annoying!
Conflicting scripts I have found so far:
- all the thunderbolt except miuiCMremount (V6 does most of these like sd card tweaks and zipalign anyway)
- mpengine and laserdroid (also from /system and /xbit)
If you don't know which scripts are from where, unzip nikhil16242's Customiser and check the folders.
Also do not install everything on one breath. Do it gradually (v6 - nullifier - engine flush and so on), test with a demanding game like Temple Run, so you can opt out any possible problems.
What you need:
All V6 scripts are here.
ScriptManager [download]
- If you have stock ROM:
Download Supercharger Starter Kit from the V6 scripts, on the page it's explained how to use it, couldn't be more simple:
Using SuperCharger Starter Kit (Prepares your ROM with the fixed su binary, zipalign binary, sqlite3 binary and busybox v1.19.4... and does NOT include the V6 SuperCharger scipt):
- Extract the zip to the root of the sdcard and it will all be in /sdcard/SuperCharger_Starter_Kit
- With Script Manager, just run StartMeUp.sh to install everything at once.
- Or, in terminal do: su, enter, sh /sdcard/Super*/Start*
Click to expand...
Click to collapse
All the rest is the same as the following:
- If you are on custom ROM:
then busybox is already installed, so you don't need the starter kit.
I. SUPERCHARGER INITIAL SETUP
The script guides you through the process, so watch it closely. In the setup it automatically determines some optimal settings, but you can change them any time.
Step 1. Put the latest V6_SuperCharger_for_Android-UpdateX_XXX (X is the actual version number) on your SD card
Step 2. In SManager:
--- 1. make sure you have granted SuperUser access, and set browse in root (long press recent apps button > Menu > Advanced > Configuration > Browse as root), but if you used before it's already set
--- 2. open the script on your SD card, set the properties to: Favorites (star icon), Root (green android skull icon) and tap Run to execute the script installer.
Step 3. A bunch of text start to come up, watch it closely, it guides you through the installer. Home Locked in Memory? n (No) and press enter and another enter to continue to drivers console.
First it goes to Pit Stop to set Driver Options, where you will be asked for Scroll Speed but also various tweaks which can improve the performance. Go through each and decide if you want them or not (I enabled most of them in he script)
When asks Use Build.Prop? : n (No) to use local.prop - I chose this, it sounds safer.
Step 4. You need to patch services.jar. It can be done automatically or manually (however the script recommends manual, and when I did it automatically for the first time, it did not backup services.jar and could not unsupercharge, only by restoring it from the rom .zip) Don't worry, doing it manually couldn't be easier:
In the Driver's Console choose:
25. Jelly ISCream Parlor {Install services.jar}​Choose manual mode, which will take you to the [RC9] ULTIMATIC RC6! [EXE]-=Ultimate Jar Power Tools=-With Maximum MultiTasking Mods! thread in your default browser, from which the essential instructions are the following:
--- 1. Connect your Android to your PC with Android Debugging ENABLED and Mass Storage DISABLED so your device has access to your sdcard. I just put it in Charge Only mode...
--- 2. Download the latest Ultimatic_Jar_Patcher_Tools_XXX_Windows.exe.zip to your PC - Windows exe is NOT zipped. Just remove the .zip extension!
--- 3. Start the exe and follow the instructions in the script. It will ask you which mode you want to use your Launcher in: Hard To Kill Launcher, Die-Hard Launcher or BulletProof Launcher. Choose Hard to Kill (HK), it is the best for our device.
You can add Maximum Multitasking mod as well, according to tests it works fine, but I did not install it in the beginning, then didn't bother
If follow the instructions in the script till the end, your services.jar should be patched, and the script will confirm this.
--- 4. On your phone in V6 script, you are still in the menu 25., right? Press x (exit), which takes you again to the Driver's Console. Choose: 32. SuperClean & ReStart! (ie. Wipe Dalvik Cache & Reboot)​
Step 5. Press enter to return to Drivers Console. Pressing enter will automatically run Quick V6 Cust-OOMizer and will calculate optimum SuperMinFree values
Apply SuperMinFree Calculator Settings? : y (Yes) to apply calculated MinFree (low memory killer - lmk) values so you don’t need to choose, but you can change it after completing the initial setup and then running the script again in menu point:
10. Quick V6 Cust-OOMizer.​Or if you type n (No), you can choose manually right away, doesn't make a difference. If it was set automatically, go to step 5. and come back later if you want to change it:
For a low memory device like ours, 512 HP recommended, these are the options in menu points:
5. UnLedded (Multitasking) {8,14,40,50,60, 75}
6. Ledded (Balanced) {8,14,55,70,85,100}
7. Super UL (Aggressive) {8,14,75,90,95,125} - it does 130-140MB​
However the best setting recommended me by educated colleague nikhil16242 and I tried is:
10 15 25 45 80 100 (slot1 - slot2 and so on)
with this I always have 120-130MB free RAM and no lag, Temple Run is butter smooth Basically it kills processes below that level (but still prioritises them - really smart script), which means less multitasking, but two-three apps that I needed in multitask were working perfectly, I didn't notice any difference, but snappier phone.
Try whichever suits you best.
Step 6. Press Enter - this action will backup Re-SuperCharger files to SD Card, in case you want to restore your Supercharger settings.
Step 7. SuperClean & ReStart : y (Yes), this will wipe your dalvik-cache so bootup time will take longer this time.
Step 8. After restart, open SManager and:
--- 1. Go to /system/etc/init.d (you can bookmark it for later access)
--- 2. Tap on S99SuperCharger and set the following properties:
------ a. Favorites (star icon)
------ b. Root (green android skull icon)
------ c. Start on Boot (gear icon)
--- 3. Tap on Save, close Script Manager and Restart your phone
NOTE:
If you don’t follow step 8., you will get an error the next time you run the script and it will show you owner’s handbook on your default web browser.
II. OOMIFIER & LAUNCHER
If you patched services.jar and choose SuperMinFree values manually then you have this already. If not, then:
OOM Grouping Fixes will determine which are the more priority apps and keeps them alive better. The Launcher mode determines how easy it will be for the mem killer to kill the launcher in case of low memory. Works flippin good, I'm tellin ya
Step 9. After restart, open SManager and Run V6_SuperCharger_for_AndroidX_XXX script again (make sure you run it in root [skull icon] but not boot [gear icon])
--- 1. SuperCharger will run Test Drive, just wait for it to finish and then continue to the Drivers Console.
During the install it should set the optimal mode automatically, which was BulletProof for me, probably because I chose the aggressive memory kill (sounds convincing lol) mode. Anyway, this means the Launcher will never get killed, about which some say it's not recommended.
--- 2. So on the Drivers Console you can choose between these launcher modes in the menu points, in reverse order of toughness:[/INDENT]
11. OOM Grouping Fixes + Hard To Kill Launcher
12. OOM Grouping Fixes + Die-Hard Launcher
13. OOM Grouping Fixes + BulletProof Launcher​Eventually I changed it to Hard To Kill, but it's up to you.
--- 3. Hard To Kill? : y (Yes) to apply
Press Enter to go back to Drivers Console
III. NITROLAG NULLIFIER
It's an experimental feature, don't know what it does exactly, but I switched it on Everything is flawless for me since, so I say go for it.
Step 10. In the Drivers Console, select:
21. Nitro Lag Nullifier {Experimental}​Enter (N)ullify, (U)n-Nullify, E(X)it: N (Nullify) to apply Nitro Lag Nullifier
After applying Nitro Lag Nullifier, press enter to go back to Drivers Console.
IV. 2 in 1 ENGINE FLUSH
It flushes the RAM cache so the phone doesn't get sluggish after days of usage.
The 2 Modes are: -=Fast Engine Flush=- for instant flush and -=Engine Flush-O-Matic=- for automation.
Step 11. In the Drivers Console, select:
17. Engine Flush-O-Matic {ReCoupe RAM Booster}​Continue and drop all file system caches? : y (Yes) to clear system cache on RAM
It will ask you (gives you 20 s to decide lol) if you want to automate it, so you don't need to schedule it in SManager. If yes, you set an interval between 1-24, which counts as hours, so it determines how frequently flushes the RAM cache. Some people set it for every hour, so why not, I did that too. Hmmm that was good
After Engine Flush, press enter to go back to Drivers Console.
V. SUPERCLEAN AND RESTART
Wipes dalvik and reboots the phone, you need that before you start to using it.
Step 12. In the Drivers Console, select:
30. SuperClean & ReStart {Wipe Dalvik & Reboot}​Do you want to SuperClean & ReStart now? : y (Yes)
VI. VERIFY SUPERCHARGER STATUS
Step 13. After restart, open SManager and run V6 SuperCharger again. You should see Supercharger Level: 100%, then you are good to go.
As the script rolls it indicates your settings so you know what is set and what's not. You can check out the other menu points, and number:
27. Owner's Guide {Open !SuperCharger.html}​This opens the... Owners Guide! ...in the default browser, you can wise yourself up about the different options.
VII. KICKASS KERNELISER
Downolad the script and launch it the same way as V6. Look at the text, wisen up and choose KickAss (k).
It will place S98KickAssKerneliser script in init.d, skull it and gear it, and reboot the phone.
TIPS & TROUBLESHOOTING
If you are only 75% supercharged, that probably means MinFree (the mem killer) settings doesn't stick (so you see you have the usual low amount of free RAM). Check the S99Supercharger script in SManager if it has the root and boot privileges (In /system/etc/init.d or Long pressing recent apps button > Menu > Scripts), set them again if they were not and reboot the phone. If it's not set again, open Owner's Guide to figure out what's next, but if you followed the steps properly, you should be fine.
Check the note in the beginning of the post for deleting conflicting scripts!
All the scripts and backups are in two places:
1. on SD card /V6_SuperCharger folder
2. /data/V6_SuperCharger
and the logs and manuals under them.
When you run a script in SuperCharger, it places a separate one in the folders, so you can make widgets with SManager for fast access:
- Long press home screen, select SManager from widgets, locate the SuperCharger folder and select the script you want to have at hand.
- For example for quick change between MinFree modes, the scripts will be in V6SuperCharger/PowerShift_Scripts (you need to run them in SuperCharger first in order to be created separately, or if you installed the additional V6 scripts (or something like that) in nikhil16242's Customiser before, they will be in init.d already).
You'll know you have chosen a suitable MinFree mode if if you play Temple Run with no lags at all shaboooooom!!!!
See, wasn't too hard and you are SuperCharged now.
Enjoy it like a Boss!
Kudos to CarlDeanCatabay and Androidmarketuser for the guides that helped me and are in the OP.
And most of all to zeppelinrox for V6 SuperCharger :good:

Started reading looks great but by ekk I'm finding it hard to get my old head round some of it. Usually when I'm like this I have to read read read till it starts making sense .So will prolly take me a bit of time.

Re: [Script][TWEAKS] V6 Supercharger
This script is really awesome once you get everything done properly,just takes a while to read the entire OP though .
Ram management is another very essential thing to be done on a low ram device like ours.Stock ram management seems to be poor imo so I use this and the results are truely amazing .
Sent from my HTC Desire C using xda app-developers app

thanks
neoyoli said:
Desire C people!
This stuff is good. Probably you heard about it already, now I tried it and seems to work very well, especially the memory management. Quite a sophisticated tool as far as me noob understand ugh,ugh! :cyclops:
So basically a collection of kernel and memory management tweaks, but has a lot of other like SD card tweaks and maintenance scripts which you can also schedule with SManager. And on the download page has some other useful stuff like 3G turbocharger and battery calibrator.
In all it seems like a must have for DC users.
http://forum.xda-developers.com/showthread.php?t=991276
Once you used it a bit it's pretty straight forward and explains everything in details when running the script, and you have the option to "unsupercharge", but have a nandroid backup at hand.
I used this detailed guide, but it's for Galaxy so use your brain
http://forum.xda-developers.com/showthread.php?t=1603953
Here's is an other one, just in case, but less detailed:
http://forum.xda-developers.com/showthread.php?t=1908505
Many thanks for nikhil16242 for recommending me this, many scripts are in his Customiser already, he would have integrated the whole V6 Supercharger, but Aroma doesn't like it. That would be awesome though!
All credits to zeppelinrox for these truly awesome scripts:good:
One wonders why android doesn't have some of them by default.
Click to expand...
Click to collapse
works great

guide updated

Hey guys, well actually i have an issue while i'm trying to run the v6 supercharger. It succesfully passes the drive test but it gets stuck at the next step. it throws me a lot of lines like 'find system/lost+found/ Too many open files' and i can't get rid of it, please help

this guide is quite old now, supercharger has been updated since numerous times. if you have a nandroid backup restore it, if not then ask zeppelinrox in his original thread. also supercharger does automatic backup before you apply the settings, which can be restored from the menu if something goes wrong, try it.

Related

Sound Enhancement *Updated*

Desire HD Sound Enhancement
Okay guys, this is an update from my thread in the 'General section'. New and improved, contains a list of working an Non-working ROMs and more scripts.
What is this you ask? Well have you ever thought your Desire HD's speakers suck balls? Can't hear the ringtone go off? Or just a crappy overall speaker quality? Well try this out and HOPEFULLY you'll actually like them
-> List of working ROMs (My experience)
- All variations of Cyanogen mod 7
- All Sense 2.36 based ROMs
- MDJ's ROMs
- All current MIUI ROMs (after flashing snd3254.zip)
- ARHD 5.x
-> List of NON working ROMs (My experience)
- Incredible S and Desire s Ports (Few Incredible S ports MAY work)
- Tested 2 3.0 ports and both didn't work, feel free to test for yourself
PLEASE Give me feedback on What ROM you are using when reporting issues and let me know if it works on your ROM if it's not posted up here so I can add it
Methods
-> Terminal Method
1. Download Terminal Emulator from the market
2. Open it and enable SuperUser permissions by typing 'su' and pressing enter
3. Then type either command 'snd3254 xx' where xx is a number from the sound table (Below) or 'echo xx|snd3254 -dspmode'
-> Gscript Method
1. Download Gscript from the market
2. Open it and enable and add a new script
3. Then type either command 'snd3254 xx' where xx is a number from the sound table (Below) or 'echo xx|snd3254 -dspmode'
4. Make sure you tick super user permissions
5. Run script
-> How to enable script on startup
Gscript application -> press and hold the script you want on boot -> save to sd -> download a program from the market called 'script manager' -> go to the folder sdcard/gscript -> select the saved script -> open as 'script' -> then tick the boxes 'run as root' and 'run at boot' -> save it and close the app and your selected script will run at boot!
Sound table
'snd3254 -dspmode xx'
01. Original_Phone_Rec
02. Original_Phone_Spk
03. Original_Phone
04. Original_Spk
05. Dolby_a_spk
06. Dolby_a_hp
07. Dolby_v_spk
08. Dolby_v_hp
09. Srs_a_hp
10. Srs _a_spk
11. Srs_v_hp
12. Srs_v_spk
13. Bass Booster
14. Blues
15. Classical
16. Country
17. Jazz
18. Latin
19. New Age
20. Piano
21. Pop
22. R&B
23. Rock
24. Treble Booster
25. Vocal Booster
- Keep in mind the above table is for sense GB Roms and the MIUI and CM set up is slightly different... Basically the same
- hp = Headphones spk = speakers
- 13 - 25 only applies to Headphones
- Replace xx with a number from the table
- If you are on MIUI or cm refer to - http://forum.xda-developers.com/showpost.php?p=12345725&postcount=2798
Optional
You can create script shortcuts on your homescreen by selecting -> shortcuts -> gscript lite -> then whatever you named your script
Please note that this has nothing to do with the kernel and I am not a Developer myself. I will however talk to Devs and work with them to TRY incorporate this into their ROMs
Let me know if this makes your speakers better in anyway
qwertyuiop
what does the Srs_a_hp and Srs_v_hp
just the a and v.. what do they mean?
Lord_Schrotty said:
what does the Srs_a_hp and Srs_v_hp
just the a and v.. what do they mean?
Click to expand...
Click to collapse
I'm not sure, although i find options with the 'V' provide better quality
Will have a go at it when I'm off work!
on cynogen mod we have dsp manager , it does the same thing right?
will test that, thanks mate
jags_the1 said:
on cynogen mod we have dsp manager , it does the same thing right?
Click to expand...
Click to collapse
DSP manager is nothing in comparison.
Sent from my Desire HD using XDA Premium App
anyone find out which one is better ? i tested most of them and the 07. Dolby_v_spk and
the 02. Original_Phone_Spk is pretty good
should the script include the word: dspmode, or just 2 digi?
Vita.T said:
should the script include the word: dspmode, or just 2 digi?
Click to expand...
Click to collapse
Both
Sent from my Desire HD using XDA Premium App
This app from the link (http://forum.xda-developers.com/showthread.php?t=1055748) does really work for me.
i downloaded the .zip file and moved it to my sdcard, now what do i do? Everytime i put snd3254 -dspmode 08 into my gscript and try running it it says snd3254 not found...
This is exactly how i type it in gscript
snd3254 -dspmode
then i save it, and try to run it, but it will not run... i seriously want my srs enhancement back...
EDIT: i am running the newest MIUI rom for HTC inspire(desire)
Thank you very much this tweak, it is so genius ! The DHD doesn't have a speaker problem it's just this crappy default setting.
Because it took me some time to get it done (i am still new with android), I post some hints. May be it makes it easier for you.
That's the way I did it. My hardware is a rooted (vodafone) branded DHD with standard HTC ROM (1.39).
- For me as a nooby the instructions in the first post seems like there need to be installed something. This scared me some weeks ago and I didn't do anything.
This is not the case ! The attachement is probably only there for other developers. You don't need to install something, everything is already there !
- In order to test the tweak load the app 'Anroid Terminal Emulator'
- Type in 'su' and click enter. In the following pop-up agree to give the terminal emulation superuser rights. (need rooted phone obviously)
- Type 'snd3254 -dspmode'. In the follwing text the dspmodes are shown and you are asked to enter the number you want. Type '04' and click enter. If you have music in the background playing you will notice the huge difference immediately.
- Alternative: Type 'echo 04|snd3254 -dspmode'. But you need to copy it from here or write it somewhere else. As CyberTod (thanks for this useful hint) described in the original thread the onscreen keyboard doesnt have "|" symbol. It does have a similar looking symbol, but it is not the same and it doesnt work if typed on the onscreen keyboard.
If you like the result you can automate the doing either with Gscript or with Tasker as Pleske explained here: http://forum.xda-developers.com/showpost.php?p=13184812&postcount=99
I automated it with tasker and run it on every reboot automatically (the context is event/system/device boot).
i didnt had the snd3254 file in system/bin
i copied it but i get the message:
cannot open codec aic3254 device -1
any ideas?
Thanx for your work guyz.I tried this method and it worked but not as much as I expected.Then my phone started freezing.I dont know if this has anything to do with it.Wiped fon and downloaded equalizer, a free app on the market and damn that little thing is a devil .The base and the sound enhancement is just great.
Snake-Plissken said:
i didnt had the snd3254 file in system/bin
i copied it but i get the message:
cannot open codec aic3254 device -1
any ideas?
Click to expand...
Click to collapse
run as root
Works fine on ARHD 5.1.7
what you mean run as root?
Type "su" (return) first
Sent from my Desire HD using XDA App

[Q]SuperCharger V6

Pls have someone of you tried the supercharger v6 script? What was the result? Was it easy to install?
Sent from my LG-P990 using Tapatalk
its great. i installed it when still in stock and still using it with neoblaze kernel.
its already fast even without the oc kernel. you wont see higher number on benchmark apps. but you will feel the difference.
this is from the supercharger thread
http://forum.xda-developers.com/showthread.php?t=991276
Requirements:
1. Rooted Phone....
2. Script Manager or Terminal Emulator to run the script. Stock ROMs can also use SM to load up boot scripts!
3. Busybox 1.18.2 OR LOWER - 1.18.3 or newer are VERY much a hassle with errors that should NOT be errors!
4. AutoStart Script by me - Enables Stock ROMS (Milestone) to utilize etc/init.d for boot scripts.
Installing/Using:
1. Download the attached V6_SuperCharger_for_Android*.txt script and save to your sdcard.
... Do NOT run the V6 SuperCharger install script at boot!
2. Load the script (V6_SuperCharger_for_Android*.txt) into Script Manager and select "Run as Root."
3. Touch the screen for the soft keyboard or slide out the keyboard and get SuperCharged! Just pick an option!
4. READ the script's output!
5. Afterwards, READ the html HELP FILE in the root of your SD Card!
6. Disable "Lock Home in Memory" if your ROM has this option.
7. Optional: For a quick status check, you can put a Script Manager widget for V6 SuperCharger on you desktop
for me, i use the 11th option (oom grouping fixes + hard to kill launcher) then reboot.
cyanogen doesent need the autostarter script ore does it?
Ok,thanks. I am running it now too and it feels really faster
Sent from my LG-P990 using Tapatalk
Hi, may i know which option did you choose? I chose the 8th one(the MAX one) but i don't feel such many differences...
If my memory is correct, i used the option 7, max RAM 512 and hard to kill launcher
It is also for CyanogenMod 7?

V6 supercharger for stock 246

HOW TO INSTALL V6 SUPERCHARGER ON MOTOROLA BIONIC .246 (STOCK ICS)
PUT TOGETHER THE FILES IN ONE SPOT SO YOU DONT HAVE TO READ EVERY PART OF ZEPPLINROX POST :angel:
PREREQ:
:good: PHONE NEEDS TO BE "ROOTED", IF ITS NOT *GOOGLE HOW*
:good: NEED SAFESTRAP / BOOT STRAP (KNOW HOW TO USE IT/ IF YOU DONT *GOOGLE IT*
:good: SCRIPT MANAGER A MUST HAVE FOR THIS, IF YOU DONT KNOW HOW TO USE IT *YOUTUBE IT*
STEP 1 - INSTALL INIT.D (FLASH ZIP)
STEP 2- REPLACE SERVICE JAR (FLASH ZIP)
!!! IF YOU RUNNING A ROM, THEN YOU NEED TO MOD YOUR OWN JAR!!!
PULL SERVICES.JAR FROM SYSTEM\FRAMEWORK AND GO HERE: http://android.mimic.ca/
STEP 3 - (DOWNLOAD) SCRIPT MANAGER FROM MARKET, YOUR NOW GONNA NEED IT FOR THE REST OF THE WAY
STEP 4 -
(*)UNZIP SUPERCHARGER STARTER KIT
(*) OPEN SMANAGER SELECT BROWSE AS ROOT
(*) FIND AND OPEN UNZIPPED SUPERCHARGE KIT
(*) SELECT FILE STARTMEUP.SH
(*) SELECT SU BUTTON, THEN SELECT RUN.
(*) INSTALL EVERYTHING AS SCRIPT RUNS.
STEPS 1-4 ALLOW FOR YOU TO RUN V6 SUPERCHARGER SCRIPT
STEP 5 - SELECT ONE OF THE TWO SUPERCHARGER SCRIPTS (ONE IS IN TESTING THE OTHER IS STABLE)
(*) OPEN SMANAGER
(*) FIND AND OPEN SUPERCHARGER V6 SCRIPT (YES THEY'RE PDF FILES, BUT SMANAGER READS THEM AS SCRIPT)
(*) SELECT SU BUTTON, THEN SELECT RUN.
(*) SCRIPT WILL GUIDE YOU ON WHAT TO INSTALL
IF THIS GUIDE ISNT GOOD ENOUGH FOR YOU, DO LIKE I DID TRIAL AND ERROR:cyclops:
I EVEN NUMBERED THE DOWNLOADS FOR YOU
THE GOODS >>>>>>>>>>> https://www.box.com/shared/44sq3napck186sbu3080 <<<<<<<<<<<<<
Link fixed
Any ss?
My Bionic!!
Hello_Robert said:
Any ss?
My Bionic!!
Click to expand...
Click to collapse
Yeah go ahead and flash with SS
I GUESS THE REAL QUESTION IS WHAT IS SS FOR YOU?
Screen shot
My Bionic!!
Downloads are dead. Is this mod like fast charging support? For example, does it unmount the sd card from being read externally on a pc and treat the USB port as a wall adapter to pull out maximum amperage instead of being limited to USB spec?
This mod is for maintaining more available ram by killing services. It increases performance, and prevents battery drain from unused programs
:/ Nothing to do with the sd or charging :/
:screwy: Look it up :screwy:
Link to original authors supercharge scripts will be posted
So what part of "don't mirror my files" is confusing?
Link to my OP and/or download page.
NO MIRRORS.

[Q] How to install V6 SUPERCHARGER in Galaxy Ace GT-5830i

plzzzzzzzz tell me how to install v6 supercharger in detail and also the loopy smoothness tweak plzzzz.
purumishra13 said:
plzzzzzzzz tell me how to install v6 supercharger in detail and also the loopy smoothness tweak plzzzz.
Click to expand...
Click to collapse
Search in the general section before asking. I found a tut for V6 supercharger and loopy smoothness tweak
can u plzzz post thelink I CAN'T find the thread
Guide by Qeemi
FOR S5830I
How to proceed:
First of all, after having rooted the device, install Busybox 1.18.2. Download Busybox Installer from the store Play.Once downloaded, open Busybox Installer and choose the version 1.18.2 from the drop-down menu and tap on Install at the bottom. Wait until you install it, close the application and uninstall it.
Now download the Script Manager, install it in phone memory, open it. You will see a window, step on Browse as Root and then click Ok. Then tap the button to the left of the center, and Other ----> ------> Advanced Options> Configuration and make sure it's unchecked the option "export $ HOME".
Now download the script from here and move it to your SD card.
Open Script Manager, tap on V6_SuperCharger_for_Android-Update9_RC8.2.sh
Then tap on "ON" (small skull of Android) and then "Run" at the top.
Wait for it to end the "Test Drive". (To display the keyboard,tap on the screen)
Configuration:
1) When prompted selected with "B" indicating to use the build.prop and not the local.prop
2) Press enter when prompted for the first time to go to setting of the driver.
3) It is requested the speed of scrolling of the script, we set 2 (middle) so we will have the opportunity to read the various commands
4) We are now asked if we run a "fix permissions" on every boot, then press "y" (or any key except "n") then enter.
5) We are asked whether to integrate the script in the / init.rc (folder that contains all the scripts that are executed at boot time) press Y and hit enter
6) We are asked whether to disable the animation presentation of the script each time you invoke the script from the Script Manager, set "Yes".
7) Press Enter to return to the console Driver
8) We are asked whether to apply the settings recommended by the "SuperMinFree Calculator", not accepted by pressing a button other than Y then click Send
9) Press enter again to return finally to the console of Driver
10) We are asked to choose a setting from 1 to 31, Board of type 7 (Super UnLedded) is the ideal setting for the quantity of the Galaxy Acei of ram (290 MB), then hit return. Let Him work.
11) After the establishment press enter to move on and enter
12) Since this is the first time you run the script will now run a "SuperClean" (a wipe Dalvik), press enter
13) When prompted, press Y and the phone will restart.
14) Re-open V6 Supercharger until you return to the choice of various options (no need to resetall, do not worry).
15) Check if the phone is "Supercharged" (just check Supercharged written next to it says 100%).
If yes the stop is at this point, otherwise continue
16) Exit 31 from the script by typing
17) With Script Manager go in folder "/ data" in the phone memory. Scroll down until you find 99Supercharger.sh.
18) Tap on it, then tap on "ON" and "boot" and then click Run at the top. This will open the script, wait for it to appear the word ") Supercharge Complete (" and exit from the Script Manager.Done! 
V6 Supercharger: https://www.dropbox.com/s/oov2rks4wd0hrbe/V6_SuperCharger_for_Android-Update9_RC8.2.sh
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1822542
Tapatalk:
My banana wrote that!
Android-fany said:
Guide by Qeemi
http://forum.xda-developers.com/showthread.php?t=1822542
Tapatalk:
My banana wrote that!
Click to expand...
Click to collapse
bro by what means is dis v6 supercharger useful?
aniket123 said:
bro by what means is dis v6 supercharger useful?
Click to expand...
Click to collapse
Better ram memory management.
100% supercharged
right now my ace i is 100% supercharged and it definately WORKS
THX
thx hitted for android-fany
HELP
if i change my rom, will i have to reinstall the v6 supercharger
purumishra13 said:
if i change my rom, will i have to reinstall the v6 supercharger
Click to expand...
Click to collapse
You have to use the script again, but it will fund all your settings.
Tapatalk:
My banana wrote that!
---------- Post added at 09:02 AM ---------- Previous post was at 09:00 AM ----------
purumishra13 said:
thx hitted for android-fany
Click to expand...
Click to collapse
And don't forget to press the thanks button
Tapatalk:
My banana wrote that!
Osumest way of super charging
I found the osumest and latest way of supercharging its fu*kin easy hope everyone like it.IF any problem occurs post here i will solve.
LINK:- http://forum.xda-developers.com/showthread.php?t=991276

[INFO][HELP][FIXES][HOW TO] Collection of Help - Info postings for the Nook Color - x

HELP
I've got a problem with my Nook Color (BNRV200)​
Tired of searching for a thread that tells you what to do when you need to install, fix a problem, need a recovery, etc. I have compiled a number of links to various threads by developers and others that answer questions that get asked a lot. This post is intended to give a site that will make finding these answers easier than a regular search. It will have a list of threads and posts with various helps, have a topical list of problems and sites which address those topics, links to common sites and app needed to get what both Noob and seasoned members need to work with and on Nook Colors.
You choose to make changes, flash ROMs, etc. it is your choice. You assume all responsibility for what ever happens. I list these links because I know they have helped and work for me as well as many others. If you need help with a particular problem addressed in these links, ask on those threads.
If you use information in any of these links make sure to click on the thanks button both here and in those links. If you want to write a thank you note also, that to is fine, but does not add to the "Thanks" counter. These people have worked hard for free that we can have greater enjoyment and fun with our tablets. Most get nothing for their time and effort so "thanking them" is their greatest return and the least the rest of us can do in appreciation. Credit and kudos are given by Authors Names in Post #2
By Topic​(A)
Add Network speed to Status Bar. Post#3
Android.process.media force close or crash Click here Also make sure all Google apps are updated, defrost frozen ones, update in play, refreeze (Mine was Gmail) (Thanks bowguy)
(B)
Boot Loop Problems (2)
Bootable CWM Recovery SD (v5.5.0.4 and now v6.0.1.2) (1)
(C)
Change "Status Bar" or "Navigation bar" colors or heights (for two rows of status info). Post#3
Change perceived DPI, rotation behavior, fullscreen, permissions on a per app basis Post#3
(D)
Dual Boot Nook (12)
(F)
Faster bootup
To get faster bootup you can disable the boot animation and save about 30 seconds from boot up time by adding "debug.sf.nobootanimation=1" to the build property file in the /system folder. This is a pain though if you keep up with the nightlies regularly like I do. I got tired of editing the file for every update or reversion if there was a problem with the newer nightly. So I created a script that goes into the Userinit.d folder that checks build.prop on every boot and adds the line if needed without any further intervention. The first boot after installing a new nightly will have the boot animation but no more till the next install when the process will repeat all automatically. Download the AutoNoBootAnimationScript.zip in attached files below, unzip, follow the included instructions and enjoy.
Faster SD card access. Instructions bottom of Post#4
Freeze/Disable applications (1)
(G)
Google Play says, "This app is not available for your device"
Get Xposed Framework in Post#3, download "PlayStore Fixes", set Fake density 240, Check No Restrictions Patch. Clear Google Play Store data, reboot enjoy.
(H)
Home button / icon stopped working, defrost / enable android Keyguard
How can I make my ROM run smoother, have more free memory or have longer battery life. Post#4
How to play flash video on Android 4.4 Kitkat in Dolphin Browser (14)
How to do a Logcat (13)
(I)
I wiped, erased, formated my /ROM (#2) partition (2)
Installing CM11 and get Status error 7 or other problems - Must use CWM 6.0.4.7+ or TWRP 2.6.3.0 (Download below)
Installing new CM11 and latest Gapps and no Google Play. Problem /system is too small.
The Prefered way to fresh install latest nightlies: If you do a conventional (no repartition) install using the smaller 01/05 Gapps and install the other Goople apps through Google play. They install into the /data directory instead of the /system. You can do this also with Gmail, Sound search (ears), Google TTS and Hangouts.
Alternate experimental adventurous way. There are two .zips available that will repartition your Nook and give you more /system space and /Data space.
Dweatons mod of Leapinlarswork, Repart.zip, is here and will yield 1.1Gb /System, 2Gb /Data, and 3.6Gb /Media.
Mine is here and will yield 1.1Gb /System, 4.5Gb /Data, and 1Gb /Media. You must get and use a reformat 5,6,7,8.zip after the running the repartition.zip for dweatons get Leapinlar's here. For mine get it here. the difference is for his you must install with CWM before 6.0.3.6, mine works with 6.0.4.8. Reverts to B&N Stock /system are available here.
Installing CM on EMMC CM11 (8), CM10.2 (9), CM7 or CM10 (6)
Installing CM on SD (3)
(M)
Make Play Store show All apps in listings Post#3
Modifying partition sizes original (5) Modified for CM11 and CWM 6.0.4.8 (15)
More SD card storage Use a 64 Gig SD Micro. Instructions bottom of Post#4
(N)
Nook won't boot (7)
(P)
Put Play Store link in App info window Post#3
(R)
Recovery boot loops (1)
Repairing partitions, blank screens and cannot flash new roms (2)
Restore Nook Color to Stock, (4)
Running Netflix app in CM 10 and 11 (11)
(S)
Screen touch sensitivity a little off. Try Nook Screen Recalibrate in Google Play
SD Card install tips Leapinlar's Tips post #2
Stock Nook Color Roms Leapinlars (1.4.3), Dizzy Dens (1.4.1)
(V)
Video Flicker in CM11 Crackle, Hulu and other video sites and apps, update to CM11 nightly 4/22+ or (10)
Volume / Sound to low. Try Speaker Boost in Google Play. Caution:
Mine works great @ 50% boost. Be very careful above 40%, go slowly and safely. If you want to rename the DSPmanager goto post #6. If you have CM 10.2+ (4.2.1) you must do the renaming since the DSP version since then throttles back the sound levels.
(Y)
YouTube updated and asked for update for Google Play Services but Google play has no update. Get Version 4.2.43 here: (11) (At bottom of attached files) Latest (4/20/2015) New update on Youtube and / or Google Play problems. Solution here: http://forum.xda-developers.com/showpost.php?p=60241045&postcount=54
(W)
Where can I get:Gapps http://wiki.cyanogenmod.org/w/Gapps
Latest Nightlies http://download.cyanogenmod.org/?device=encore&type=nightly
Recoveries (download in attached files below)
Stable versions http://download.cyanogenmod.org/?device=encore&type=stable
Older releases of CM 10 or CM11 http://techerrata.com/browse/cm/encore/nightly​ List of Authors of Post
To whom credits and thanks are due!
See Post (#2)​
If you know of other Help, Info, etc sites post a reply I'll check it out and include it in the lists above. Even if the post are not on Nook Color forum, If it worked for you on your Nook, post a reply with your Rom version and I will check it out and consider adding it to this list.
Recoveries​ The recoveries I have are listed below and can be downloaded in the attached files box. The MD5 sum files are in the MD5 sums for recoveries zip. Download it, un-zip it, and check with the approriate recovery. These are for the Nook Color (BNRV200)
CWM Recoveries3.2.0.1 - Good for CM7 Eyeballer or nemith
5.5.0.4 - Good for CM7 thru CM10.2 Racks
6.0.1.2 - Good for CM7 thru CM10.2 - LeapinLar
6.0.5.0 - Must have for CM11 5-16+ Nightlies eMMC & SDCard installs - polymath257
6.0.5.1 - Latest Available - rjwil1086​TWRP Recoveries2.3.1.0 - From TWRP Site
2.4.1.0 - Eyeballer
2.6.3.0 - Must have for CM11 thru 5-15 nightly (use 2.4.1.0 for pre CM11) - Eyeballer
2.8.3.0 - Must have for CM11 for 5-16+ nightlies - rjwil1086​(nba#+5)
[INFO][HELP][FIXES][HOW TO] Collection of Help - Pt2
By Author of Post​
Dean Gibson
Repartitioning the NC to 1-5 Gb, 2-4Gb and 5-1 Gb: (5) http://forum.xda-developers.com/showthread.php?t=1094371
Eyeballers
Install CM7 or CM10 + Recovery to EMMC: (6) http://forum.xda-developers.com/showthread.php?t=1030227&highlight=install+cm7+to+nook+color
Leapinar
Tips: (1) http://forum.xda-developers.com/showthread.php?p=25354258#post25354258
EMMC Repair: (2) http://forum.xda-developers.com/showthread.php?p=28457126#post28457126
Nook Color Installation Guide for CM7/CM9/CM10/CM10.1/CM10.2/CM11 on SD: (3) http://forum.xda-developers.com/showthread.php?p=32921666#post32921666
nismopc
Running current Crackle TV 4.0.3 on CM11 Nightlies: (10) http://forum.xda-developers.com/showthread.php?t=2634964
Nootered
Restore to Stock: (4) http://forum.xda-developers.com/showthread.php?t=931720&highlight=fix+boot
pastordl
Running current Netflix app in CM 10 and 11: (11) http://forum.xda-developers.com/showthread.php?p=44626173#post44626173
Repartion and reformating zips for CM11 and CWM 6.0.4.8: (15) http://forum.xda-developers.com/showpost.php?p=54401912&postcount=4177 (From Dean Gibson's work, also Leapinlars and Dweaton)
paxChristos
[Tutorial] How To Logcat (13) http://forum.xda-developers.com/showthread.php?t=1726238
RileyGrant
Dummies Guide to Fixing 'My Nook Won't Boot' (7) http://forum.xda-developers.com/showthread.php?t=949699&highlight=boot+zip
Steven676
CyanogenMod 11 Nightly Builds for Nook Color: [Read first three posts]: (8) [FONT=&quot]http://forum.xda-developers.com/showthread.php?t=2629337[/FONT]
surviveland
[Guide][Flash]How to play flash video on Android 4.4 Kitkat - xda-developers (14) http://forum.xda-developers.com/showthread.php?t=2548001
Tausaur
Dual Boot (12) http://forum.xda-developers.com/showthread.php?t=1275859
Tdm
CWM 6.0.4.7 Touch Recovery Ramdisk (http://forum.xda-developers.com/showpost.php?p=51446977&postcount=19015) http://forum.xda-developers.com/showpost.php?p=51446977&postcount=190
Customize Rom or Apps without being a developer - Xposed Framework
Customize Rom or Apps without being a developer - Xposed Framework
From Rovo89's thread
In this thread, I'm presenting a framework which gives you the possibility to modify your ROM - without modifying any APK (developers) or flashing (users)!
Click to expand...
Click to collapse
Get Xposed Framework and install instructions Click on "click to show content" box
For the framework:
Download the Xposed Installer APK and install it
Launch the Xposed Installer, go to the "Framework" section and click on "Install/Update"
Reboot
Done!l
You can verify this by starting the Xposed Installer again. If app_process jumped back to an older version (or none at all), you probably have a ROM with S-On or similar, which reverts any changes to /system after a reboot. Then you can try to flash this file: http://forum.xda-developers.com/show...postcount=2308
For any modules you want to install:
Download <module>.apk and install it
Launch the Xposed Installer and go to the "Modules" section (you will also get there if you click on the notification warning you that the module is not enabled yet)
Enable the module by checking the checkbox
Reboot
Done!
For information & help with Xposed Framework go to Rovo89's thread.
Once you have installed the Xposed Framework you can get many of the modules under the Download tab in the framework app.
There are also a large number of modules at this thread made for module developers to list their work. If the Modules indicate they are made for a specific phone or tablet they may not work on others. If you try and it does not do what it says it will do, contact the module maker, not rovo89, unless it is his module, ie: "Make Play store show all apps" or just un-install the module. No guarantees they will help. Some only have one tablet and only develop for what they have.
A Short list of some of the things you can do using Xposed Framework and modules.
These do all work with CM11 current nightlies and CM 10.2 last nightly, 1/19/14
For more info on Modules listed install Xposed Framework and click on Download tab​
Change color of status bar / notification bar. Xposed Framework - X Blast tools. Plus lot more. By femblack.
Network Speed Indicator - by fatminmin. With 123 below the up down speed can be shown in two readable rows. ** This will not work with CM10.2 Stable with the 3.0.8 Kernel or the updated hack fix kernel
Play Store link in app info - by qwerty12 - Does what the title says
App settings - by Tungstwenty & Rovo89 - What it is: This is an Xposed module that allows changing generic settings on a per-app basis. "Generic settings" means settings that are global to all applications, such as: perceived DPI, rotation behavior, fullscreen, etc..
Play Store Fixes - Rovo89 - Make play store show all apps
Enable SwiftKey predictions in more places - by qwerty12 - Email address website and filter list fields.
123 Dimension Editor. - by Hamzahrmalik - Change various UI dimensions: Status bar height, Navigation bar height and others. I doubled the height of my status bar and shrunk my navigation bar.
Cool Tool: - by Deviant Studio Software - Monitor various system info in floating window or in Status Bar. I have time, day, date, Free Memory and Battery Temp in two rows of my status bar.
Status bar volume. - by Niko001 - Move the volume bar over the status bar.
I do like things my way. That is what Android is noted for.​
This Module "Workaround for Netflix on CM10/CM10.1" works on most any CM10 thru 10.2 Rom.
From Kaepernick's post.
"Well, thanks to Entropy512's help, I was able to modify his Xposed hack to work on CM10 (based on Android 4.1) and CM10.1 (based on Android 4.2) for the Incredible. Using the newest Netflix app and it's working well without issue.
Click to expand...
Click to collapse
Get it here.
*** Make the Xposed Framework persist through a CM ROM update with script "90-xposedpersist.sh" (in the 90-xposedpersist.zip), put the ".sh" file in the /system/addon.d/ folder. Available here See Post #4 there for specifics here***
Image 1. Cyan status bar & navigation bar, network speed indicator & X blast options.
Image 2. Play Store button in app info.
Image 3. App Settings screen.
Image 4. Home screen with dual line expanded status bar, Cool tool info and Net work speed.
Run CM10 & 11 smoother and get more free memory
Tips to help CM10 and CM11 run smoother, less laggy, etc.,
and have more free memory on your Nook Color
and maybe even a little longer battery life.
These are a collection of tips that have been collected from various post in XDA, personal sharing with others, and as a result of my own desire to try to improve things where I can. I have tried everything listed here and each adds a little to smoothness(s), free memory(f) or battery(b) life. My CM11 flashed Nook runs quite smoothly, with free memory at desktop running from 110 to 160 Mb and six to eight hours of battery life depending on type of constant use. This is on a nearly three year old tablet. I have partitions set to 5Gb data and 1Gb media. All apps are in the tablet. I also have a 32Gb Sdcard. I also have over 220 apps including system apps. I use my tablet from 6-8 hours or more a day.​
Unless noted all apps mentioned are available through Google Play. I recommend the apps, etc., because they work for me. I get nothing out of it except the joy of helping others. Like everything try at your own risk. This includes app I have on my Nooks. If you have other programs you can try adjusting them as I have and see how it helps, or not. Trying and finding out what does and doesn't work is half the fun.
Free and simple​
On all CM10 and CM11: (s) Try lowering your maximum clock speed to 1000, or even 800mhz in System, Performance Processor, Maximum CPU frequency. Many have reported improved smoothness at slower speeds. Faster can run ahead of itself and actually make things jittery. Make sure to check Set on boot to retain settings.
CM11: Use 5/17+ nightly.
On all: System Settings ( some may only apply to CM10 or 11 List:
Wifi, advanced,Uncheck Network Notification (b)
Keep Wifi on during Sleep, only when plugged in (b)
Scanning always available, uncheck (b)
Wifi Optimization, checked (b)​Sound,Set quiet hours (your sleep time)(b)
Touch sounds, screen lock sound, volume adjustment sound and Charging Sounds, Enable, all unchecked (b)​DisplaySleep (set time for max time you want screen to stay on before going to sleep, shorter time saves more battery)(b)​Developer Options,Kill app back button, checked, (Allows you to kill kill app by long pressing back button)(b)​Performance,CPU governor, (Lower on list will give faster response but use more battery, Default is "ondemand". Try the others and stick with what suits you the best.) Make sure to check Set on boot to retain settings.​If you haven't activated the "Developer Options list":In "About Tablet, Build Number, tap ten times till it states "Developer Options turn on."​
AdFree: (b) Available on Slideme.com Stops adds in browsers and most all App with add banners. Saves time by not downloading the adds.
On All: ((f,b) Freeze / Disable unused (unusable) apps in System.(b,s,f)
Don't delete them since any ROM update you install will replace them, freezing / disabling them will last through an update. The stock App manager allows you to disable most of these. Titanium Backup and Rom Toolbox Pro can freeze more but do cost, though I think they are well worth the price for what they deliver. There are some free "App freezer" programs available. I've only tried Chef's App Freezer, check the ratings and comments.Android Keyboard (ASOP) - I use Swiftkey (lite is available)
Camera - (No camera in Nook, no need of file)
Com.android.smspush. No phone text.
Gmail and / or Email and Email Services (if you use another E-mail client, ie:K9)
File Manager ( if you uses another ie Root Exporer (Speedsoft) or Root Browser (Jrummy))
Google search - Definately slo-o-ows things down
Key Chain - if you don't use lock screen
Mobile Data and Mobile Network Configuration - No phone, no need
One time Init - only used on first install once
Picasa uploader - If you don't use Picasa
Print Spooler - If you don't use it.
Sound Recorder - No Microphone, no need
Sound Search for Google Play - If you don't use it
Talk back - If you don't use or need it.
Trebuchet - If you use another Launcher.
Voice+ - No Microphone or phone, no need.
If you use a different clock than stock, calendar etc you can freeze / disable the stock version. Example: I use Dejaoffice to link with Outlook on my PC so I freeze Calendar storage, calendar, and calendar sync.​
Change app permissions: (f,b) (for apps that run at startup and then stay in memory even when you not running them.)
I use App settings, it requires Xposed Framework to run but once set up does it's thing in startup, changes permissions, and closes. To get the Xposed Framework go here.
The most common causes of this problem are the following permissions: receive boot completed, vibrate, and wake lock. Not all apps can have these turned of. App settings has the ability to launch the program from is menu. Try turning off a permission, save, menu (launch). If it works great, if not go back and turn that permission back on.
The following is a list of Apps I changed permissions on and which permissions I disabled to keep them from persisting / sticking in memory:Advanced Task Manager: receive boot completed, and wake lock.
Alarm Clock Extreme: read phone state, receive boot completed, vibrate, and wake lock.
BusyBox Installer: receive boot completed, and wake lock.
CPU Master Pro: receive boot completed.
Crackle: receive boot completed, vibrate.
DejaOffice: vibrate.
Elixer: vibrate, and wake lock.
Evernote: receive boot completed, and wake lock.
Google Play Services: receive boot completed, and wake lock.
Kyo-Tux Aeon HD: vibrate.
News and Weather: receive boot completed, and wake lock.
Nook: receive boot completed, vibrate, and wake lock.
Pandora: receive boot completed.
RoboForm: receive boot completed
ROM Manager: receive boot completed, and wake lock.
The Weather Channel: receive boot completed, vibrate.
Titanium Backup: receive boot completed, vibrate.
Winamp: vibrate.
YouTube: receive boot completed, vibrate.​​
Advanced Task Manager: (b,f,s) Put the widget in dock, set your ignore list in app. One press and all unwanted apps go bye-bye.
My Ignore List:
Adfree, Elixer Widget, Alarm Clock Extreme, K-9 mail, Nova Launcher, Swiftkey, Speaker Boost, Pie Pro, Earthquakes, AFWall+, Clipper+, DejaOffice, Tasker, 360 Security.
Not so Simple but worth the time, still free​
Replace DSPManager with Speaker Boost: (f,b) Get more volume and save EMMC memory.(DSPManager 18Mg - Speaker Boost 1.7 Mg=16.3Mg saved) Get more info here.
Replace Trebuchet with Nova Launcher: (s) does more, has more adjustments. (Does take more memory but pays back in smoothness)
LagFix (fstrim) Free. (s) Use two to three times a week. (s,b)
Use Elixer widget to replace other widgets: (f,b) and save Memory 45 meg (for Battery widget, Wifi state and stats widget, free memory and CPU stats) - 12 Meg for Elixer = 33 Emmc memory saved.
Rom toolbox lite: Settings: (f,b,s) (some of these may need Pro)
Under performance.Settings, Main Preferences, Boot Delay, 40 seconds.
Task Manager, Tap on Task Manager on top left of screen.You can change the Minfree memory settings, with CM10 I found strict to work the best. So far with CM 11 custom settings of 30 FA, 40 VA, 65 SS, 75 HA, 90 CP, and 100 EA setting works well.) I set them then save them into custom settings). Make sure to update to 5/17 nightly.
Start up killer, add Elixer, Google play services, The Weather Channel, and YouTube. (keep them out of active (service) memory or minimize there active size.)
Ignore List. 360 security (or your antivirus app), AdFree, AFWall+, Android system, Clipper+, Earthquakes, Elixer Widget, K-9 Mail, Mobile Data, Nova Launcher, Pie Pro, Rom Toolbox Pro, Speaker Boost, System UI, Tasker.​SD Boost. You can change the size of the cache to both internal and external SDcard. I find with my class 4 Sandisk SDcard a setting of 4096KB works best. A benchmark is available to test your settings. If you have a faster card ie: Class 10 you can try larger cache sizes and save as custom. ​
Not Free but worth it (IMHO)​
Upgrade to Nova launcher Prime:
In Nova Settings: (s)
Look and Feel, Scroll and Animation speeds (faster than light) (s)
New Apps - check Auto Add Short cuts, (make sure to turn off auto add in Google Play.)
Labs - Check the following, Big Grid size options, Widget Image Async List, Widget Image Cache, Restore Widgets Faster. (s) ​
Upgrade to Rom Toolbox Pro, LagFix (fstrim) Premium (scheduling trims): Get more bells and whistles and help support the developers.
Upgrade to 32 or 64Gb Class 10 SD card - Buy a 32Gb Class 10 SD card, about $20.00 + ship, prepare as usual and you'll cut your access time to the SD card buy about half. I can do a 2Gb recovery backup in about 5 and 1/2 min. With my Class 4 it takes just shy of 11 minutes.
More Memory Buy a Sandisk 64 Gb Class 10 Micro SD card, about 40.00 + ship, and partition the whole card as one Primary partition, format as FAT32, Sectors/ cluster 32 (16384 bytes) using "MiniTool Partition Wizard Home Edition" available for free here. I have donated to MiniTool since I use it for all kinds of partitioning,(resizing, moving, copy, etc.), on PC's and all kinds of flash memory. I started with the partition set to 30,451.33, copied my data from my 32G sdcard. It worked great and with SD boost set to 4096 all SD access was noticeably faster. So I used Partition Wizard to resize the card to the full capacity, the program changed the size and copied all the files in about 20 minutes. Plugged it into the Nook Color and went from 17 GB free to 47 Gb Free. It is a bit slower than the 32Gb & and the bootloader doesn't list CWM or TWRP recovery kernel or ram on the SD, but oh the storage. I can put over 40, 2 hr AVI or MPEG movies on the card and still have better than 20Gb free.
If you have other Apps, tricks, tweaks that you have tried and found to help. Please reply and I will try them out and list them if they do add to the smoother, longer, freer Nook.​
Netflix on CM11 on SD
Good source of info. Thanks! Confirming that latest Netflix is working on SD. See that thread
If you use Speaker Boost try this to save memory.
Ever since CM7 and Nook Color Tweaks, in has been necessary to find a way to boost the sound output of our little wonder tablet. I tried several an ended up using Speaker Boost. I have found that I no longer need to use DSPmanager. The problem is that freezing or disabling the app doesn't keep it from installing in memory and using 18meg of precious RAM. Renaming the file with.bak extension or deleting it works after a reboot but, if you like to keep up with the nightlies like I do it is re-installed with every update. It gets to be a pain using a file manager to do this every day. So let your Nook do the repetitive work.
So I have worked up three quick and easy ways to rename the file.The best and easiest is the last.
1. Is a Tasker task. This was the first one I used and I setup a widget so I. Can rename with one tap. The.xml file can be imported as a task into Tasker.
2. Is an apk made from the Tasker task. It works the same way just doesn't need Tasker to work.
3. A script file that can run at every boot, check if DSPManager.apk exists, and rename it. This eliminates having to rename it and reboot after every ROM update as it is renamed before the app is loaded. It is only 279 bytes and is the only file that has to remain to work. In the 90RnamDSP scripts.zip below are three files. One that goes into userinit.d folder, an instruction.txt file and an installation script that sets everything in place just by running it.
I want to thank LeapinLar for the help he gave debugging the rename script. This was my first script and had to get everything in proper order and get the syntax correct. What I learned help me build and debug the installation script in a few hours.
Download, unzip, import, install, etc, and enjoy.
Thanks, nice job
Might check the links for the 6.x recovery threads
webyrd said:
Thanks, nice job
Might check the links for the 6.x recovery threads
Click to expand...
Click to collapse
Checked and corrected, Thanks.
pastordl... check pm about a couple of link issues
DizzyDen said:
pastordl... check pm about a couple of link issues
Click to expand...
Click to collapse
Thanks, guess we know where the missing link is.
problem with latest YouTube and Google Play apps not working
For problem with latest YouTube and Google Play apps not working, Go here:
http://forum.xda-developers.com/showpost.php?p=60241045&postcount=54

Categories

Resources