[ROM][AOSPA4.2.2r1][p6800/p6810/i815](20130721a)ParanoidAndroid 3.68 New HALO fixed

[ROM][AOSPA4.2.2r1][p6800/p6810/i815](20130721a)ParanoidAndroid 3.68 New HALO fixed - Galaxy Tab 7.7 Android Development

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After 2 weeks of sleepless and sweaty work, I finally port our orphan GalaxyTab 7.7 to ParanoidAndroid!
Cheers!
This is an experimental release. Try it at you own risk
Good luck !
22/7/2013
After a few SystemUI crash loop, I found the bug in HALO. The 'a' version is rebuilding and uploading now.
21/7/2013
It's getting harder and harder to keep up with the new codes for our tab now! Everytime I pull new codes, our outdated blobs might be incompatible! After the bootloop of i815, telephony was another wall I hit. Spent two whole days to dig out another tiny bug!
The new PA3.68 has a lot of changes in HALO and Gesture (Don't ask.. I don't have time to try it yet).PA has its own OTA now! It's about time for us to have a new PA. Uploading to goo.im is terribly slow. May need a few hours...
　History
8/7/2013
PA3.65 is out, PA change to a shorter file name now...
In this build, I included two new drivers from the new kernel I'm working on. Light sensor has more steps and lower margins now. It will be more pratical. The repeat charging loop when power off is fixed. Same as the stock rom, the tab will reboot after 5 minutes of charging (don't know why yet).
12/6/2013
The source of HALO is finally out! Its too long for a new PA build. GPS is also fixed. I test it briefly. Need some time to manage how HALO work. The pie feature of PA is not as good as cm10.1. This is really a major update from PA, :good: Cheers!
3/6/2013
It's really great that Espen96 has setup a host at his server for me! :good:
http://3djanos.com/daniel_hk/index.php?dir=rom/pa3
It is a pure download page without any ad. and delay. Also works great for downloading in the tab.
2/6/2013:
After finishing the latest wifi driver from Athero, I manager to modify the Stock JB driver in the similar way. Now we have TWO wifi drivers. Both are working quite well. The new driver was base on the latest driver from Athero and I added wakelock and power management to it. The stock driver was based on the Athero source 2 generations back but with some modifications from Samsung. I packed both to different kernels for you guys to test and decide which is best for you.
The file with kernel-a is from Athero which I'll use it as default from now on.
The file with kernel-s is base on the stock driver.
Cheers!
26/5/2013:
Many changes have been made by PA team. Although I have't found what caused the gps issue, it is worth to keep up with the PA3. New pa3.56 builds are uploading now. The latest kernel is included. Which might need further polishing but no more extra heat will be generated with it.
25/5/2013:
I was trying to port the wifi driver from Samsung's JB source for nearly a week! Turn out that It is another landmine from Samsung! After trying everything including proting the whole stock JB kernel to cm10.1, I can confirm that it only works fine on Samsung's own blobs! Back to square one and start with the original wifi driver from Athero. I need to add wakelock and power management support for this driver and yet a workable driver is out in a few hours! I just forgot about all the lessons from Samsung and stepped on another landmine... The kernel with the new wifi driver is uploading to goo.im and pre-release areas. Work for both cm10.1 & PA3. I tested it over 40 hours on battery without any problems...
Minor fixes in video driver is included. Please test it and report.
22/5/2013:
I finally port the latest wifi driver from Samsung's p6800 JB source to the kernel! That was a really tough job! I also add the latest patches from Athero (the chip manufacturer). Our driver is actually an update to the stock driver... Testing for a while now. I believe the SOD and torrent issues are gone now... Uploading to pre-release and goo.im now. Please have a durable test on it! Work for both cm10.1 & pa3 as before.
Wifi drop at sleep when no activity... please hold and let me study the new driver again.
14/5/2013:
Just got a tip that can turn the incall screen to portriat from my GT-Plus thread. Set to force auto rotation with Ultimate rotation or other 3rd party apps. In 4.2.x, incall screen layout is handled in call card from Contact. This way will override the call card(which doesn't handle rotation now) of Contact to force auto.
13/5/2013:
I'm adding one more release area goo.im. All the previous roms are uploading to goo.im now. OTA with GooManager will be supported shortly. Since goo.im may not be available in some region. I will continue to keep the other locations.
9/5/2013:
The new PA3.50 HALO builds are uploading to pre-release now. Auto-rotation has been annoying many of us since cm10. I just found the bug cause it. The current angle will be preserved when auto-rotation is off. Then I found that PA has no rotation settings in Display. Rotation button do exist in Quicksettings... Spent half an hour to add the rotation settings to PA. The auto restart when plugging charger/usb is kinda fixed. I refreshed my rusty Photoshop memory and drew the new charging images. Enjoy!
6/5/2013:
21APR build is released. Found a bug in wifi driver power management. Testing now, hoping to fix the wifi drain issue.
21/4/2013:
The BT fixed version of PA3.15 is uploading to pre-release now. APN settings is fixed. PA use a older settings source which have a different referenece point. Next move will be the kernel drain. As usual, cm10.1 will be the vanguard.
P.S. forgot to mention, kernel support for NTFS is enabled but I don't have NTFS sdcard to test it. Please report.
18/4/2013:
New Phone.apk with blacklist is not working. The "a" version with the old working Phone.apk is unloading to pre-release. A PhonePatch.zip (flash in recovery) is also uploaded for those already flash the pa_p6800-3.15-17APRO2013-170005 build. Sorry for the inconvenience caused.
17/4/2013:
The new build with the fixed kernel is uploading to pre-release. A lot of changes from PA and AOSP including the new blacklist in Phone. For the first time, the PA build is newer than cm10.1. New light sensor for i815, don't know if it work. Please report.
11/4/2013:
The 10APR2013 vesion has a bug. Internal sdcard is read only. A patch has already uploaded.
Anyone download the pa_xxxx-3.15-10APR2013-xxxxxx in pre-release,
please replace it with pa_xxxx-3.15-10APR2013-xxxxxxa.
Thanks!
10/4/2013:
It's about time for our PA3 to have a new heart. The O/C Kernel works fine on PA3 too. In case some device might have a lower margin. By default, it is the same as before 1.4G with no U/V.
I also find a workaround to enable the write permission on the external sd_card. Thanks for the tips from USCanthonymy in my GT-Plus PA3 thread. Everything is working almost as good as CM10.1 now. Building now, will upload to pre-release in a few hours.
Waiting for my friends BT headsets to verify the last issue - bluetooth headset.
4/4/2013:
The new PA3.15 build for p6800 is uploading to pre-release now. Phone is now working on p6800. The bluetooth Headset still has issue with the audio driver. Seems mic is ok but no sound in the earpiece. Since the phone part is fixed, no more beta now. Update to the new AOSPA 3 logo too.
Building the other 2 models now and will upload to pre-release ASAP.
2/4/2013:
The final release of 3.15b2 is uploading now. Audio fix and latest update from PA is included. For p6810 & i815, no more major issues now.
For p6800, phone apk still not working...:cyclops: After studying for sometime, I suspect it is caused by the propietry libraries from Samsung (libril, libsec-ril, etc.). Will try changing or rewriting the phone.apk, voicedialer, etc. to adpat it. Please be patient.
31/3/2013:
External sdcard mounting issue is fixed. 3.15b2 is uploading to pre-release. It also include the latest update from PA. The latest PA settings are really good.
28/3/2013:
I was thinking that applying the same changes from CM to PA is straight forward... It is harder than I thought! Quite a few differences between the two. The device tree really need tidying up to work on AOSP... Finally I get it through.
PA is now 3.15. I also upgrade the new video driver to mali 3p1 in the kernel. Thanks to alanorth for updating the samsung proprietry files. Some changes required to work on our 7.7 but I had already done before. Just copied from the previous build and the build get pass.
Building all 3 models now. Will upload to pre-release in a few hours.
18/3/2013:
PA3.1b1 builds are released (no change from pre-release). I'm working on bluetooth and phone on CM10.1. Further update will be released if major changes in PA or after fixing bluetooth and/or phone on CM10.1.
8/3/2013:
My tab is fixed! Yeah!
Ater dumping the first few MB from my tab via the JTAG port. I know what cause my problem now...
It was the dd command I issued earlier to flash the recovery. I must had enter the wrong partition in of=.. I write the data to mmcblk0 instead of mmcblk0p6! I recover those data from my friend's tab. I lost all the data inside but I'm grateful to have it back. This is really the price I have to pay...
This command is extremely dangerous! I should have put it in a script to avoid typing errors. I did it in the terminal apps which is even more dangerous since the software keyboard easily cause typing error... I must had touch the Enter key when I type the letter p. I have done lots of times so I didn't bother to check the terminal window (my second mistake). This is a very good lesson to me... Thanks for those concern and for those teasing (I deserve it!). Really grateful to have you guys around! :good:
2/3/2013:
PA3.1 is uploaded to the pre-release area. Please report if who have time to test.
28/2/2013:
Thanks for some friends to test the pre-release PA3.0b3. They are now released on the post to make room for PA3.1. I just borrow a Tab from a friend to test the PA3.1 new build. Hoping to release it in weekend.
20/2/2013:
PA3.0b3 is uploaded to the pre-release area for testing. Changes made in Telephony and Harware keyboard. If anyone has time and experience to test, please report..
19/2/2013:
PA3.0 migrate to 4.2.2r1 now. Since I don't have the Tab to test, not much changes have made. This is the best I can do. Please keep a forgiving mine if anything goes wrong...
11/2/2013:
After tidy up the device trees, I build the PA3.0 for all models as promise. Telephony doesn't change in 3.0. Next move is to deal with it...Not a problem for p6810 owners. Boot animation is a little bit ugly ...my humble opinion...
10/2/2013::crying:My Tab fail to boot this morning, I think my bootloader is corrupted. Not even the Samsung logo and the battery icon while charging. I have to send it to the dealer for repairing...Hoping won't put an end to my works
9/2/2013:
At the time I finished a workable build for p6800, PA has already announced the version 3.0.
My antique PC is trying its best! I'll finish the 3.0 build for all 3 models and will upload them ASAP.
Change log:
21/7/2013 - 3.68
Latest PA3.68 source with HALO & Gesture
Keep up with the AOSP 4.2.2r1.2 tree
New ParanoidAndroid OTA app
New HALO and Gesture
Bug fix in phone.apk to work with the new Telephony.
　History
8/7/2013 - 3.65
Latest PA3.65 source with HALO
New power driver in kernel. Fix charging loop at power off
New light sensor driver. more step and lower margins
Toolchain revert to 4.4.3. More compatible.
12/6/2013 - 3.60
Latest PA3.60 source with HALO
GPU max frequency set to 360Mhz (more stable than 400Mhz)
GPS is fixed
Calender update
26/5/2013 - 3.56
Latest PA3.56 source
New wifi driver in kernel.
Updated power management in kernel.
GPU avs fixes in kernel.
Advance settings (Galaxy Tab settings) is added.
9/5/2013 - 3.50
Latest PA3.50 HALO
kernel fixes in my cm10.1
Add Rotation settings in Display settings. Angle selection not working yet...
Fix auto restart when pluging charger/usb.
fix the status bar battery icon not update issue
21/4/2013 - 3.15
Bug fix on APN settings
Bluetooth headset audio fixed
remove some kernel debug/testing coding
enable kernel NTFS support (not tested)
17/4/2013 - 3.15
PA & AOSP latest source
Bug fix and GPU300 kernel
minor fixes in the kernel.
New Blacklist in the Phone (not working, replace with old one)
New light sensor driver for i815. Don't know if it work, please report.
10/4/2013 - 3.15
PA latest source.
fixed wrting permission to exteranl sd
O/C U/V kernel
new governor & ioschedulers
Can preset freq & voltage with Pimp my rom's Pimp my cpu or SetCPU
4/4/2013 - 3.15
Latest PA source.
Phone is fixed in p6800
Changes in security, hoping no more sd card r/w issues.
2/4/2013-3 - 15b2
audio fix in the kernel
New video driver in kernel
latest source from PA
System security and vold fixed. External sd can mount now.
PIE & DPI settings in Quick Menu
Superuser in Settings
bluetooth enabled
add CMFilemanger
2/3/2013 - 3.10b1
Changes from PA. mainly on PIE
New kernel
Enable performance settings.
28/2/2013
Changes in Telephony: mobile data working, p6800hone FC after call.
open source libsecion
hardware keyboard disabled by default
19/2/2013
new PA3.0 source (4.2.2r1)
patches for Cifs included
small things like screen capture is added
10/2/2013
update to 3.0 sources
8/2/2013
first workable release
Know issues:
　1. All CM10.1 known issues
　　- hwcomposer: HDMI dongle doesn't work
　　- wifi: won't connect to hidden ssids
　　- wifi: built-in wifi-tethering doesn't work
　　- i815: no IR-Blaster support
　2. Bluetooth issues
　　- bluetooth mic not working in Skype & Google+
　　- VoiceDialer not working with bluetooth yet.
Downloads:
Code:
　[COLOR="Green"]Goo.im[/COLOR]: [url]http://goo.im/devs/daniel_hk/rom/pa3[/url]
[COLOR="Green"]　mirror:[/COLOR] [url]http://www.kuaipan.cn/file/id_39173572073096195.htm#kp|39173572073096201|0[/url]
　● [COLOR=Red]PA3.65: (8/7/2013)[/COLOR]
　　p6800: [url]http://d-h.st/rtw[/url]
　　p6810: [url]http://d-h.st/nUP[/url]
　　i815: [url]http://d-h.st/NT2[/url]
　● [COLOR=Blue]PA3.60: (12/6/2013)[/COLOR]
　　p6800: [url]http://d-h.st/pOI[/url]
　　p6810: [url]http://d-h.st/NiI[/url]
　　i815: [url]http://d-h.st/o3S[/url]
　● [COLOR=Blue]PA3.56: (26/5/2013)[/COLOR]
　　p6800: [url]http://d-h.st/fan[/url]
　　p6810: [url]http://d-h.st/68X[/url]
　　i815: [url]http://d-h.st/ygb[/url]
　● [COLOR=Blue]PA3.50: (9/5/2013)[/COLOR]
　　p6800: [url]http://d-h.st/aVo[/url]
　　p6810: [url]http://d-h.st/jiz[/url]
　　i815: [url]http://d-h.st/6gX[/url]
　● [COLOR=Blue]PA3.15: (21/4/2013)[/COLOR]
　　p6800: [url]http://d-h.st/gKE[/url]
　　p6810: [url]http://d-h.st/jz5[/url]
　　i815: [url]http://d-h.st/BY6[/url]
　● [COLOR=Blue]PA3.15: (17/4/2013)[/COLOR]
　　p6800: [url]http://d-h.st/z1Q[/url]
　　p6810: [url]http://d-h.st/jph[/url]
　　i815: [url]http://d-h.st/FmS[/url]
　● [COLOR=Blue]PA3.15: (4/4/2013)[/COLOR]
　　p6800: [URL]http://d-h.st/hbD[/URL]
　　p6810: [URL]http://d-h.st/3OI[/URL]
　　i815: [URL]http://d-h.st/M2O[/URL]
　● [COLOR=Blue]PA3.15b2: (2/4/2013)[/COLOR]
　　p6800: [URL]http://d-h.st/96G[/URL]
　　p6810: [URL]http://d-h.st/EpF[/URL]
　　i815: [URL]http://d-h.st/BO7[/URL]
　● [COLOR=blue]PA3.1b1: (2/3/2013)[/COLOR]
　　p6800: [URL]http://d-h.st/XwK[/URL]
　　p6810: [URL]http://d-h.st/XcI[/URL]
　　i815: [URL]http://d-h.st/z9R[/URL]
　● [COLOR=Blue]PA3.0b3: (28/2/2013)[/COLOR]
　　p6800: [URL]https://mega.co.nz/#!oZZWRIZA!EjjuAT1VsW-UUqVZf8xBSnF3JnFxdB0chwDYCzXUBYQ[/URL]
　　p6810: [URL]https://mega.co.nz/#!lUYHFLxb!EmFuTX8xhgWNKjFZq30xLXwLyXJK8Cvzviz5frLMdzs[/URL]
　　i815: [URL]https://mega.co.nz/#!5NR0EIZB!BDzknRLcuLW7yLzdlJKvMQgSRdwjSgt_7vbdQ4hq3iw[/URL]
　● [COLOR=Blue]PA3.0b2: (19/2/2013)[/COLOR]
　　p6800: [URL]http://d-h.st/gBu[/URL]
　　p6810: [URL]http://d-h.st/NhS[/URL]
　　i815: [URL]http://d-h.st/dT4[/URL]
　● [COLOR=Blue]PA3.0b1: (11/2/2013)[/COLOR]
　　p6800: [URL]http://d-h.st/tvP[/URL]
　　p6810: [URL]http://d-h.st/hnS[/URL]
　　i815: [URL]http://d-h.st/6LP[/URL]
　● [COLOR=Blue]PA2.99b1: (9/2/2013)[/COLOR]
　　p6800: [URL]http://d-h.st/UZz[/URL]
　● [COLOR=Red]PA GApps 4.2.2[/COLOR]
　　full-20130209: [URL]http://d-h.st/w4u[/URL]
　　full-20130308: [URL]http://d-h.st/MDd[/URL]
　　full-20130329-signed: [URL]http://d-h.st/x1L[/URL]
　　full-20130427-signed: [url]http://d-h.st/UcS[/url]
　　full-20130524-signed: [url]http://d-h.st/xcr[/url]
　　Latest: [url]http://goo.im/devs/paranoidandroid/roms/gapps[/url]
[/SIZE]
Pre-release ROMs:
　**The latest builds for testing. Some may not boot.. Please report after testing
　site1:http://pan.baidu.com/share/link?shareid=296833&uk=1512265283#dir/path=/JB ROM
　site2:https://mega.co.nz/#F!xRYlwZbY!LZM83QAU4OM8cz7jW0jG5Q
Credits:
** The CyanogenMod Team who keep many devices alive!
** The ParanoidAndroid Team who create this great rom
** locerra for his great work on 7.7 devices trees
** teamhacksung for the drivers
** Thanks Espen96 for setup a host for me!
Donations:

FAQ
Q: Why the keyboard not show?
A: AOSP 4.2.1 support hardware keyboard (via OTG I suppose),
　The default settings is "ON" which hides the software keyboard.
　To show the software keyboard:
　　Settings > Language & Input > Default
　Turn hardware keyboard "OFF"
Click to expand...
Click to collapse
Q: How to avoid the emmc brick bug when flashing
A: if coming from stock ics. Here is one of the easier way:
flash the rom (and gapps) in recovery. don't do any factory rest and wiping!
reset to recovery again.
do factory reset or wipe data
reset and enjoy!
Click to expand...
Click to collapse

Thanks a lot for your great work man.

Keep on working for the life of P6800, cheers !!!

nice one... still love this device the most... others that i bough still cant compete with it...

Thank you !!!!!!!!!!!!!! I love you !!!!!!

Re: [ROM][AOSPA 4.2.1][p6800/p6810/i815](9Feb2013)ParanoidAndroid 2.99beta1 -Experime
Finally new developer for our device
Wellcome
Sent from my GT-P6800 using xda premium

Re: [ROM][AOSPA 4.2.1][p6800/p6810/i815](9Feb2013)ParanoidAndroid 2.99beta1 -Experime
Cool stuff. No phone is a problem for me though.
Sent from my GT-P6800 using xda app-developers app

I assume PA2.99-3.00 doesn't have a combined bar mode for tablet layouts, same as CM10.1? Do we have to endure the bottom/top bar waste of space with it too?

dfkt_ said:
I assume PA2.99-3.00 doesn't have a combined bar mode for tablet layouts, same as CM10.1? Do we have to endure the bottom/top bar waste of space with it too?
Click to expand...
Click to collapse
AOSPA has a new hybrid properties, similar to the one in pa2.5x. No reboot is required for default settings. Tablet mode merge the status bar to Nav. bar as before.
Cheers!

thanks for your great work!!!
2. The Buggy Telephoy is disabled, no phone and data for the time being.
Click to expand...
Click to collapse
no 3G internet for now?!?

Great work ... keep it up
and waiting for v 3.0

There are a lot of items that I don't see under known issues that have historically been problems: i815 IR blaster, GPS, light-sensor, HDMI dongle, Hidden SSID, Wifi hotspot, etc. Are these all working?

Kralik said:
There are a lot of items that I don't see under known issues that have historically been problems: i815 IR blaster, GPS, light-sensor, HDMI dongle, Hidden SSID, Wifi hotspot, etc. Are these all working?
Click to expand...
Click to collapse
These are CM10.1 issues mentioned in (1). I don't have an i815, no way to test. But the device tree is derive from CM10.1. I suppose all the hardware issues are similar.
I only have p6800. Bluetooth & Telephony are the two major issues in p6800.

Eugene8310 said:
thanks for your great work!!!
no 3G internet for now?!?
Click to expand...
Click to collapse
Yes, phone and data is not working. The framework and telephony trees which PA work on is a little bit out dated. The baseband is not recognized. I need to study quite a no. of files to decide what to do... and I'm working on it.
If anyone has any idea, please let me know.

Re: [ROM][AOSPA 4.2.1][p6800/p6810/i815](9Feb2013)ParanoidAndroid 2.99beta1 -Experime
You make me happy Thanx you a lot.
AUs

Re: [ROM][AOSPA 4.2.1][p6800/p6810/i815](9Feb2013)ParanoidAndroid 2.99beta1 -Experime
Can we flash from cm 10.1 Jan 5 th build without factory reset ?
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app

Just gave the 6810 version a spin, looks and performs generally very nice so far - thank you very much for your efforts, Daniel!
One thing though - am I blind or are there no developer options in the settings? Can't find USB debugging, no matter how hard I look. (Edit: adding persist.service.adb.enable=1 to my build.prop did the trick.)
Also couldn't find a way to change those awful huge tiles in the popup bar menu to normal switches, and no dpi/px setting in which the clock and wifi/battery icons in the bar aren't cut off in landscape view, but those are just tiny issues. (Edit: to make the combined bar look normal, I edited /etc/paranoid/properties.conf - com.android.systemui.statusbar.dpi=160 and com.android.systemui.navbar.dpi=160)

golfinggino said:
Can we flash from cm 10.1 Jan 5 th build without factory reset ?
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Yes, I've tried.

dfkt_ said:
Just gave the 6810 version a spin, looks and performs generally very nice so far - thank you very much for your efforts, Daniel!
One thing though - am I blind or are there no developer options in the settings? Can't find USB debugging, no matter how hard I look. (Edit: adding persist.service.adb.enable=1 to my build.prop did the trick.)
(Also couldn't find a way to change those awful huge tiles in the popup bar menu to normal switches, and no dpi/px setting in which the clock and wifi/battery icons in the bar aren't cut off in landscape view, but those are just tiny issues.)
Click to expand...
Click to collapse
if any of you kind of lazy to edit the build prop... just go to setting about and press on the build number about 7 times... it will then show the hidden developer option....

Related

[ROM][old|newbl] CM10.1 - tonyp - T-Build 05

°°°
Attention: This ROM is discontinued!
It still works great as a daily driver and got a large userbase, but as CM10.1 has been abandoned there won't come any new updates anymore!
After working really hard on it for more than 2 month(!) I proudly present my first CM10.1 T-Build :fingers-crossed:
I put lots and lots of effort into it to create a great, smooth and bugfree rom experience for you guys.
I tried to fix all huge bugs on CM10.1 like bluetooth fast forwarding and the wifi hotspot.
Additionally I took the time to create a non-neon gapps package, as the official 4.2 one does only support neon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you appreciate all the effort that has gone into this ROM then consider a donation.
While it's neither expected nor required it is highly appreciated!
> Paypal Donate link <
Each donator will get a huge thank you and a private dance show
Preview (you can't wait for the leafs getting down now, can you!):
(and as I've been asked a couple times in the past: yes, you can send me an amazon gift card code via PM as wel!)

CM Known Bugs & Fixes:
This list shows what has been done so far.
As you can guess by the sheer amount of the fixed bugs there has been put lots and lots of time into this ROM.
And don't forget about all the awesome work pengus77 has put into the kernel - without him we would still suffer from bsods and huge battery drain.
Do NOT post or ask about stuff on the known bugs list!
The bug is listed here - I don't need to get reminded that it's there.
If there's progress or an ETA or anything we will post about it - if not there's not.
I really mean it! Do not ask, it's just annoying. It might only lead to us abandoning the work on the bug.
Oh check the "plans for the next build" section below as well.
But of course you're very welcome to post a decent fixing idea or development related note in'te the CM10.1 development discussion.
Hall of shame of people who ignored my warnings and still posted about already known bugs.
If someone continuously breaks this threads rules you'll land on my ignore list.
tonyp (damn!)
CM10.1 specific bugs:
Bluetooth is accellerating on many headsets fixed (by replacing the bdroid bt stack with bluez)
Wifi hotspot isn't working fixed (by forwardporting the CM10 internal hotspot handling to CM10.1)
SDCard write speed is subpar. not fixed
bugs affecting all CM10+ based ROMs (unordered list):
unable to reject calls on SU660 basebands fixed
low brightness after unlocking fixed
automatic time on SU660 and v30x basebands is broken fixed
wifi & 3g drain fixed (Kowalski Kernel)
notification lights aren't working fixed
zram is selected at 18% but isn't enabled fixed
init..rc contains some parameters interfering with the kernel configs fixed
bootanimation gets displayed "too long" fixed
CM10.1 Performance CPU settings aren't compatible with our Tegra CPU fixed
you can't bind the searchkey to actions like opening the recent app drawer fixed
FM radio isn't working fixed (see here)
In-Call muting fixed
Call forwarding fixed
autobrightness isn't working properly semi-fixed (kk120+ - kernel instead of ROM controlled, so you can't control it in the ROM, but via a sysfs)
Stock camera has some drawbacks (especially panorama & hdr) semi-fixed (by his or this ported LG Stock camera)
HDMI isn't usable not fixed
no signal after airplane mode bug (double press data or reboot to gain it back) not fixed
Changes and cherrypicks to the CM10.1 codebase:
Major Changes:
The codebase is CM10.1.0 RC4
fixed all the bugs above
incuded tiny non-neon gapps
Development settings enabled by default
Advanced reboot enabled by default
tonyp memory management added and enabled by default
(you can turn it off at Settings - Performance - Memory management)
purgeable assets enabled by default
enabled Pie Controls
Vibrations lowered (no, you can't change it back easily)
removed the autobrightness configuration options
(it's kernel controlled, you can't change it in the ROM!)
removed Videoeditor (and some LWPs)
added the awesome epic Kowalski kernel as prebuilt
(including KowalskiManager, alsa mixer and tx power stuff)
added a ****ing epic easteregg
Cherrypicks:
added more options to rebind the hardwarekey
added more options to the lockscreen longpress buttons
(including screen off! save the power power button some presses!)
option to pull down the Quick Settings panel when there are no new notifications
added a notification drawer brightness slider
option to disable the CRT animation
Center Clock option
Text-only batterystyle
Quickmemo framework support
Option to disable the lockscreen Camera widget
Custom carrier text
Recents RAM bar
much much more - read the changelogs linked at the end of the next post
Plans for future builds:
Bugs fixes:
-
Other:
GCC 4.7 experiments
CREDITS:
arcee and the CM team for all the work they did.
pengus77 for his awesome work at the kernel and new bootloader.
niko (Andrei E.) for his work on including the bluez stack into android.
marsgod for fixing the callbug on the old bootloader.
wkpark for the cracked ICS bootloader, the ramhack idea, and all is valid input.
goo.im, AndroidFileHost and vadonka for providing me great hosting services.

I got a bug - can I report it?:
If you want me to take the time to help and fix your bugs I expect you to take the time and do this properly!
Quick check: Did you do a full wipe before installing build 01? If not you need to do that first!
Check the known bugs section. If it's listed or mentioned there, drop it (and wait patiently if it'll get fixed eventually).
Use the search function and try to find if others have been posted about it.
You're only at the app and can't properly search within a thread?
Then wait until you're at home and report the bug from there!
Check the last 3 pages if the bug has been mentioned there.
You still with me? All of this takes too much of your precious time?
Then use another ROM!
Still nothing? Then report the bug in this thread.
Always attach logs to your bugreport!! Bug reports without logs will get ignored completely.
Study this for more details: [Reference] How to get useful logs
People who fail in doing this properly will get into the hall of shame.
Downloads:
ROM:
By downloading and/or using this ROM you agree to the guidlines of this thread:
Read and understand the entire OP!
Yes, it takes a couple minutes - but what's that compared to the 2+ month I put into the ROM??
Don't be a douchebag!
Follow the rules!
If you agree click the button and download the ROM :fingers-crossed:
Download: http://tonyp.basketbuild.com
Make sure to download the correct version for your bootloader!
Mirror: http://goo.im/devs/tonyp
Gapps:
This ROM already has tiny gapps included! That's a minimum gapps package (<20mb)
I put a lot of effort into integrating the required apps and libs and tested it carefully.
I choose this approach because of the many problems that the standard package causes to our non-neon Tegra2 phone.
Included are only the most basic (g)apps like Playstore, Talk (with working videochat), Calendar sync provicer etc.
If you want to remove the included gapps flash this package after flashing the ROM:
CM10.1-gapps-remover-tonyp.zip
For those of you who want the "full" gapps package including Google Now, TTS, Faceunlock, voice search etc. I worked on a full non-neon gapps package.
Get it from this thread: Non-neon Gapps (Android 4.2) dev-discussion thread
Do NOT flash any other gapps package - they aren't compatible with our phone!
If you accidently did that then format /system and reflash the ROM.
This is necessary to prevent bugs like like the keyboard closing while typing.
Addons:
You can download my officially supported addons from the addons folder:
http://goo.im/devs/tonyp/CM10.1-T-Builds/addons
This ROM has native support for Quickmemo.
For more details read this post.
I've build patches for OpenPdroid and PDroid2.0.
For more details read this post.
Kernel:
kowalski kernel thread
This ROM comes with the awesome kowalski kernel by pengus77.
For new versions (which come regularly) check out his thread!
Various:
TWRP recovery for both bootloaders
my modded adb drivers
Instructions:
Updating to a newer T-Build::
No wipes or system-format needed!
Choose the correct ROM for your bootloader
Flash the ROM
Flash the latest kowalski kernel
Tiny Gapps are included, so there's no need to flash gapps if those are enough for you.
If you want the full gapps package use the non-neon one I provide here.
If you want to remove gapps flash this package after flashing the ROM: CM10.1-gapps-remover-tonyp.zip
Reboot
Coming from another ROM:
If you're on the newbl either use pengus CWM 6.0.2.5 or my TWRP!
Other recoveries won't work.
oldbl users can use any CWM >5 or TWRP version.
Do a full wipe!
Just do the wipe, you will be thankful afterwards when everything does run better.
Format /system
Choose the correct ROM for your bootloader
Flash the ROM
Flash the latest kowalski kernel
Tiny Gapps are included, so there's no need to flash gapps if those are enough for you.
If you want the full gapps package use the non-neon one I provide here.
If you want to remove gapps flash this package after flashing the ROM: CM10.1-gapps-remover-tonyp.zip
Reboot
Don't restore system apps (like Settings) or system data (like Wifi data) with TitaniumBackup!
My personal recommended configuration:
Go to Settings - Performance - Processor and change the "Maximum CPU frequency" to 1200 (or even 1500) and "Set on Boot"
Open the KowalskiManager
enable the 3 power saving options at the top
lower TX Power to 11
Change the SD readaheads to 512
enable dynamic fsync
This ROM comes pre-configured with the following memory management changes:
zRAM enabled with 18%
tonyp memory management enabled
purgeable assets enabled
Changelog:
T-Build 01
T-Build 02
T-Build 03
T-Build 04
T-Build 05

Let me leave with a couple more notes:
This ROMs focus is stability! It's intention is to be a daily driver without the need to constantly flash new updates - that's why I kept you guys waiting that long and didn't release my daily testbuilds (more like 3 builds a day actually) which haven't been perfectly stable, yet.
That's why I took CM10.1 M3 as a base and don't merge in nightly features - everything in this ROM should be well tested and fully working.
I only picked memoryleak fix that's been discovered after M3.
I won't cherrypick each and every feature that's in some other ROM!
If there's a real useful addition that I personally like I will do it, but the fancy stuff has to go into other ROMs.
You guys know me - I am mostly patient and don't mind slight offtopic posts.
For completely offtopic posts you can use the CM 10.1 discussion thread.
... but I hate people who are lazy and don't do their own research. I spent countless hours on this ROM, I think I can expect you to spent a little time before asking questions.
I am not a vendor who's obligated to release a ROM for the phone - I am doing this in my free time for you and me.
So please - don't behave like a total noob. Or [email protected] and I will have a busy fishlapping time

F.A.Q. - Frequently Asked Questions:
How can I swap the mounting points for internal SD card and external SD card?
If you're on the new bootloader, flash this script via Recovery (thanks, @C0D3N1N3R!). For those on the old bootloader, you need this one instead (thanks, @SWTR!).
Which gapps package should I use with this ROM?
Seriously? You haven't been paying attention, have you? Go read the posts above this one!
Which PDroid version should I use?
It's a matter of personal preference, actually. Try both and see which one fits your needs the best. Keep in mind that if you're switching between Openpdroid and PDroid 2.0 (or viceversa) you need to uninstall the app and re-flash the ROM first, or else this kitten will die and it'll be in your conscience forever! I'm serious!!
Just flashed this ROM via recovery and can't get past the boot logo, what's wrong?
Chances are that you're using the wrong Recovery. Try pengus' CMW v6.0.2.5 and flash the ROM again. If the problem persists, check that the ROM zip file isn't corrupted (see each build's md5 hash on tonyp's goo.im CM10.1 folder). If none of that helps, then you better get Tony some logs
How can I know which bootloader my device is using?
An easy way to indentify this is by seeing the bootloader logo that appears when you turn on your device: white -> old bootloader, pink -> new bootloader.
How can I set a custom DPI on this ROM?
You can either use the Google Play DPI Fix Tool, or Tony's personal recommendation: Xposed in combination with Xposed App Settings (link down, use this one or this one instead for now) (see reference by @rugglez).
Viber doesn't work on this ROM, I can't even make a call. What can I do?
According to what we have read, recent versions of Viber won't work on CM 10+ for our device. Apparently, the developers of the app were been notified about the issue and they might look into it soon. Worry not, my friend, since not everything is lost. According to @engine24, Viber version 2.3.6.338 seems to be working alright. Make sure you uninstall your current version of Viber first before installing this one, though!
Battery drain is a bit too high, what's happening?
If you just flashed this ROM, please do one or two full battery charge cycles and see if it helps. Also, check on BetterBatteryStats for rogue apps keeping your device awake (and this is definitely worth a read!).
My screen goes bright before unlocking / after locking?
It's a known issue when using autobrightness. There's no fix for this at the moment.
My GPS takes ages to get a lock, how can I fix it?
Try the latest version available of the Google Specific No-SSL AGPS patch by @crypted. Unpack the gps.conf file and copy it into /system/etc/ using a root file explorer (set permissions to rw-r--r--). Optionally, you can add ro.ril.def.agps.mode = 1 to build.prop (find it in /system folder) but only if you're still having problems after applying the patch.
And, in case you're wondering, the answer is no: this patch won't be integrated into the ROM, so don't ask ... or will it?
Edit: that damn Tony added it to T-Build 3, so this is no longer necessary (unless he decides to drop it hehe)
Hardware Search key is not working!
Go to Settings > System > Hardware keys and make sure that Enable custom actions is checked. Also, change Search key action to In-app Search.

Spoiler post
Well the title says it all
Spoiler nr1. here is a screenshot of battery life with this rom and KK121...

Yeah im already curious...........tout de meilleur frère :laugh:
Waiting for upload to finish....merci

rmrajm1 said:
Yeah im already curious...........tout de meilleur frère :laugh:
Waiting for upload to finish....merci
Click to expand...
Click to collapse
Already finished, tony has great upload speed hehe
Loving the structure and text of the thread, though, same with the pictures
Sent from my LG-P990 using xda premium

Can:t w8!! Good job guys!!
Sent from my LG-P990 using xda premium

Oleeeeee
Gesendet von meinem LG-P990 mit Tapatalk 2

Thanks alot , well done .. will be testing it in moments

Congrats for the release tonyp. I've been with your test builds since I found them so I'm waiting eagerly to try this final build.
Thanks for the great work!

great job done.....I am thrilled to try a CM ROM....will report a feedback....
I am sure it will rock
CONGRATS and THANKS for the hard work.

Congrats downloading it
Sent from my LG-P990 using xda premium

This sounds great. Thank you for the sacrifices you've made a big investment in this old phone that can still be done to compete with the newer devices.:thumbup::beer:
Sent from my LG-P990 using Tapatalk 2

tonyp congratulations.

Thanks for your hard work
Sent from my LG-P990 using xda app-developers app

Yeah... downloading... :victory:

I found the easter egg.. :laugh::good:

Subscribed and ready for fishslapping... xD
Downloading and flashing too.
Thank you tonyp!

[ROM][4.4.4r2]p6800/p6810/i815](11Nov2014)CM-11.0 Unofficial

See OmniROM post#2 for TIPS on 4.4
http://forum.xda-developers.com/showpost.php?p=47668044&postcount=2

OK, that's really was so speed an awesome.
u such talented to make it that fast.
Thanks, will try it tomorrow, and report back if there's any issue not mentioned above.

Good work mate. Your efforts in this forum are appreciated by all.
Thanks
Sent from my GT-I9500 using XDA Premium 4 mobile app

Great! Can't wait for this to be good enough for a daily driver. Thank you.
PS. Any chance you can put you device tree/kernel etc on github? It's been quite a while since you last updated them from the looks of it.

daniel....you keep our tab alive with your brillian brain...thx a lot fof the dedication.

Thank you so much !!
I'll try it soon
Good job :thumbup:
Sent from my GT-I9505 using xda app-developers app

Installed it, and will use it for a week as a daily driver.
actually, no major issues, all are cosmetics.
nothing to add to the bug list you mentioned for me now.
GPS not working yet, but i got a lock on my location in Google maps !!
transient noises are weird really, yet i only use the tab in portrait mode only
also, in lock screen, it says no SIM Card.
I put a SIM card and i make phone calls.
----
for me the most important in all this minor issues is screen backlight.

Wow, that was fast! Thanks Daniel. I will give it a try!
Enviado de meu GT-P6800 usando Tapatalk

samsung seems to forget this machine, and won't give any update to us.
i will try to use after major bugs has been fixed, pls keep on this project, thx danial.

WiFi drops sometimes during usage.
and sometime, it doesn't want to re-connect again to the access point until i reboot the tablet.
V-Sync is broken .. that results a tearing when try to scroll something fast, and sometimes the notification end line

It's amazing what you have done to our poor 6800 with limited support, that is very difficult to upgrade to Android 4.4 even for Google to do it for Nexus 4, really appreciate your hard work very much!!!

I'm getting an error while flashing gapps on p6800.
set_metadata_recursive: some changes failed.
But i can use my tablet, i'm not sure what is missing.

pemmoura said:
I'm getting an error while flashing gapps on p6800.
set_metadata_recursive: some changes failed.
But i can use my tablet, i'm not sure what is missing.
Click to expand...
Click to collapse
download gapps for KitKat 4.4 from the link provided in OP, basically it's Paranoid Android GApps.
do full wipe before, then flash it.
it worked normally for me.

bassem.mohsen said:
download gapps for KitKat 4.4 from the link provided in OP, basically it's Paranoid Android GApps.
do full wipe before, then flash it.
it worked normally for me.
Click to expand...
Click to collapse
I'm glad to see the 4.4 development on the good old 6800, I will give it a try once the main bugs are fixed.

Hey.
Installed since 1 day now. Had troubles with the gapps download links (2 broken downloads). Now everything works fine after finding another gaps package.
Yea cm11 some features missing but suprised good state already. I would suggest same speed as the last cm10.2 build. Great base to start from!
Actually i like the short "snow" flickering (bug) when rotating or on some transitions. ?
Sent from my GT-P6810 using xda app-developers app

racca said:
Great! Can't wait for this to be good enough for a daily driver. Thank you.
PS. Any chance you can put you device tree/kernel etc on github? It's been quite a while since you last updated them from the looks of it.
Click to expand...
Click to collapse
Devie trees and kernel source are uploading now...
Don't have enough time to tidy up everything but they are what I'm using now. Only have a few commits in the kernel under testing.
Cheers!

Thanks for keeping this device alive...
Sent from my Nexus 4

when try to use ART, it causes a lot of services to continuously crash.
and couldn't use the andthing from the amount of crash pop up messages

bassem.mohsen said:
when try to use ART, it causes a lot of services to continuously crash.
and couldn't use the andthing from the amount of crash pop up messages
Click to expand...
Click to collapse
I just fixed the backlight and light sensor. Hoping to release an update tomorrow. You may try again later.
Cheers!.

[ROM][4.4.4r2]p6800/p6810/i815](30Dect2014)OmniROM4.4.4-HOMEMAKE

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a homemake(omni's term) build of the open ROM Omni4.4 for our Samsung GalaxyTab 7.7.
Although some features proposed(eg. Multiwindow) are not yet implement, it is worth trying and we are very lucky to follow this main stream!
Release notes:
2014/10/24
This is the final release. Omni has no more update now. In this build, I put the updated Mali r3p2-01rel4 driver in the kernel. Sadly, the latest user space driver (USD) available is r3p2-01rel3 (API 23). I trick the driver by lowering the kernel API to 23 (from 26) and luckily it works! We are the first device to have r3p2-01rel4!
Many developers were stopped by the properitry USD. The opensource solution Lima also stopped last year. I will try the USD from Mali-450 later but it's a long shot.
The latest Bluez has the "can't turned off" issue. I used the bluez 5.25 instead. This time, the sco and aptx modules are included but I don't have those Bluetooth devices to test.
So this is my last Kitkat. Next year will be the L's days. *** Happy New Year! ***
2014/10/24
Android L is coming. This might be the last update for Omni. goo.im don't like me. Not even a single file finished overnight... Try AFH first.
2014/8/29
Repack View attachment omni-exfet-fix2.zip
2014/8/28
I'm not a fan of exFat and I don't have problem reading exFat formatted in PC. As some repeatedly report on failing to access exFat, I think there are variants. I use the old source to build a patch which is recovery flashable.
View attachment omni-exfet-fix.zip
For those who can't access exFat, please test and report. Good luck!
History
2014/8/24
I rewrote the GPU settings this week. To improve stability, Vpll settings is now commited after reboot. The default is now return to the stock values. Hoping no more compliant (mostly from p6200) now. Omni still on 4.4.4r1 code but I update all the AOSP project to 4.4.4r2. And lastly, the front camera in i815 is fixed. Cheers!
2014/7/21
Omni 4.4.4 still use the 4.4.4r1 tree. I worked on the kernel again to improve performance. GPU is boost to 400Mhz which increase Antutu score by 2k+. zRAM support and KSM upgrade are also included.
It's time to work on i815 mobile data...
2014/6/7
Omni is the first few release 4.4.3r1.1. Customer IR driver is added. i815 and some p68x0 can enjoy all the IR remote apps now. Major update from Bluez also included. Not much progress but 4.4.3r1.1 is definitely a hit. Cheers!
2014/5/3
Trying a few settings in Linaro, including O3 optimization. No apparent different... May be the blobs are bottlenecks. Switch back to original toolchain. In this build, charging animation is fixed, Lockscreen rotation is fixed and bluetooth update from Bluez. I haven't encounter DSP manager crash. Don't know if it is fixed.:laugh:
2014/4/12
This build included all the fixes in my cm11 and so as the only minor issue...I built this with the Linaro toolchain 4.7.4 for both kernel and platform. Tested it for a few hours and no observable bug with Linaro. I'll let you guys to see if there are any performance difference and issues with Linaro.
2014/3/30
No progress on the rotation issue. Tracing through the kernel, driver and frameworks. Lots of changes since 4.4... :cyclops:
There are some major updates in Omni and it's been too long for an update. Wifi-tethering is working now. Some patch to the wifi driver. Hoping to make it more stable. Top mic is enabled in the driver now. Hoping better quality during calls.
New library for i815, see if mobile data would be working now. i815 owners Please report. Doesn't work... :
2014/3/9
Play with a few more ROMs (pac, carbon, AOSB, etc.) this weekend. I might start a thread for experiment rom for those flashing maniacs.
It's been too long for an Omni update. There are some cool Quick Settings features which are unique to Omni. In the last two builds, I had to disable some of them to avoid SystemUI from crash. I finally pull everything together this weekend. We are having full features of Omni now!
Recent menu and screenshots are free from glitches now. Rotation glitches are still there... Some fixes in bluetooth. Hoping it is more stable.
For some unknow reason, pa_gapp-micro causes crash in some system app. eg. SystemUI.
Don't flash pa_gapps-micro to this Omni. Others pa_gapps are OK.
2014/2/9
It was a productive week. I finally port bluez5 to Android 4.4! Although only pairing and file transfer is working, it is a hugh step for us. bluez.org team is working on other services now. Very happy that we are the first device having bluetooth working without bluedroid! Cheers! :highfive:
It's sad that CM11 needs extra care so it's Omni again. In this build, GPS is fixed. Omni can merge su to settings menu now so default superuser is removed. One step closer to Official Omni.
** The mirror on Mega is discontinued. **
2014/1/24
Finally back to the roms after a busy week! Everything seems quite smooth. Mange to make the new multi-window to work. I also fixed a bug in the wifi driver. Hoping no more ON/OFF now. OmniTorch is fixed and quick fixes on Camera for video recording.
As BeanStalk had make wifi tethering working, it motivated me to take a look. It was not that hard as I thought. Wifi tethering and WiFi direct is working now. Two less items in the do list. Bluetooth would be the final large piece of pizzle. Cheers!
2014/1/17 -- Seems the multi-window patch casue some systemUI crash. Please wait for a while.
Just return from a trip. Omni is now Android 4.4.2. Sim card will take a while to be recognized after reboot (upto a few min.). I don't have problem in WiFi since the last release but I change a few things in WiFi. Factory reset is essential. In case of repeated ON/OFF, you may try turning off the Wifi optimization in the advace menu. If not working, only a factory reset can help. Don't know why yet.
GPS has conflict with telephony. Lock GPS at air-plane mode first if you have trouble with it.
Multi-Window cherry pick not working in new source. Not quite sure why... Don't have much spare time lately but I'll try to keep it up.
2013/12/12
Just Manged to include the preliminary multi-window source for the 4.4.2 test build. I made a patch for the existing OmniROM. Although the codes is preliminary, it works great. Some apps might not work but overall is worth trying. I might include it in the later builds if it doesn't cause crash. Files will also be found in the download links. Flash the MultiWindow-patch zip in recovery. (A revert zip is also provided) Cheers!
The commit message from the owner Guillaume Lesniak:
[WIP] Multi-window
This is a big work in progress, which currently has some bugs, but begins to look okay.
You can already multitask a little bit, by using the app switcher and long-pressing an icon,
then select "Add to Split View". Last window touched gets the key focus.
Code is very ugly, I know. Don't merge it, don't use it for now. Unless you want to make your code ugly.
Enjoy
Click to expand...
Click to collapse
2013/12/11
It's been quite a while. Stuggling in the mobile data for a while with no luck. I can make it work but keys fails (calls can only be ended with Airplane mode).. Meaning that i815 may have the chance but p6800 owners have to wait. Good news are: I finally port the R3P2 driver to the kernel (source from i9300, I never expected that hard to port!). Camera is also working now. The OmniROM has moved a big step forward.so I decided to put CM aside and build this first. Cheers!
2013/11/18
I planned for an AOSP build for some times. Right after my cm11 build, I found the first unofficial release of OmniROM4.4 at 11/18. That was the excelent timing. It really drew my attention to dig deeper. The repos are there and it's time now!
I already downloaded the source of AOSP from googlesource so It took only a few hours to sync the source (that would be quite good at my region). I already modified the device tree for AOSP earlier and it took me only a few hours to build it out! I never expected.that smooth. The Omni team are doing a really good job. :good:
AOSP base roms are slim and the overall is quite smooth. The only observable difference is the performance settings. I added koush's superuse which I think is essential. All issues in my cm-11 build inherent here
Change log: :victory:
Code:
Official Omni [URL="https://changelog.omnirom.org/"]Change log[/URL]
[COLOR="Blue"]2014/12/30[/COLOR]
- Latest Omni source (4.4.4r2)'
- Bluez 5.25, SCO and APTX modules included
- Update to Mali-r3p2-01rel4 kernel driver
- some kitkat blobs from other devices.
[COLOR="Blue"]2014/10/24[/COLOR]
- Latest Omni source (4.4.4r2)
- Bluetooth update form Bluez
- exFat patch
- new ril blob for i815
[COLOR="Blue"]2014/8/24[/COLOR]
- kenel GPU control, max. 267Mhz default
- new GPU settings
- new ril libray
- Fix mobile data for i815
- Fix front camera for i815.
[COLOR="Blue"]2014/7/21[/COLOR]
- Latest OmniROM4.4.4r1 source (KTU84P)
- kenel GPU control, max. 400Mhz default
- kernel zRAM support
- kernel KSM upgrade
- Bluetooth upgrade from Bluez
[COLOR="Blue"]2014/6/7[/COLOR]
- Latest OmniROM4.4.3r1.1 source (KTU84M)
- Add Customer IR Hal driver
- Reboot stuck is fixed
- Bluetooth update from Bluez
[COLOR="Blue"]2014/5/3[/COLOR]
- Latest OmniROM4.4.2 source (KVT49L)
- Lockscreen rotation is fixed. Lockscreen will not stay at landscape in rotation lock now.
- Charging animation when power off is fixed
- Bluetooth update from Bluez
- Add translations for HK & TW
[COLOR="Blue"]2014/4/12[/COLOR]
- Latest OmniROM4.4.2 source (KVT49L)
- Fix the glitch during rotation
- Correct InCall screen orientation to portrait
- Bluetooth update
- Kernel backport update for bluetooth
- Build with Linaro toolchain
[COLOR="Blue"]2014/3/30[/COLOR]
- Latest OmniROM4.4.2 source (KVT49L)
- Fix Wifi-tethering
- Fix Bluetooth headset
- Patches in Wifi driver
- Enable the top mic in driver
[COLOR="Blue"]2014/3/9[/COLOR]
- Latest OmniROM4.4.2 source (KVT49L)
- Bluetooth update from bluez and fixes by me
- Add Samsung Service Mode (*#*#197328640#*#*)
- Fixes in SystemUI to avoid crash
- New audio policy to enable 2 mic.
[COLOR="Blue"]2014/2/9[/COLOR]
- Latest OmniROM4.4.2 source
- Bluetooth support via Bluez5
- Bug fixes in GPS
- SuperUser is removed, can install in TWRP
preparing to apply for official...
[COLOR="Blue"]2014/1/24[/COLOR]
- Latest OmniROM4.4.2 source
- Multi-window patch is ok now
- Fix a bug in WiFi
- Add WiFi Tethering and WiFi direct support
- OmniTorch is OK now
- Camera fixes, video recording is ok now. Will come back for further polishing.
[COLOR="Blue"]2014/1/17[/COLOR]
- Latest OmniROM4.4.2 source
- Android 4.4.2 (KOT49H)
- Changes in WiFi
- SuperUser update
- tidy up the new R3P2 driver
- opensource libril
[COLOR="Blue"]2013/12/11[/COLOR]
- Latest OmniROM4.4.1 source
- Android 4.4.1 (KOT49E)
- opensource libcamera
- Mali R3P2 driver with new blobs
- new kernel modem driver.
- changes in libril (hoping data would work for i815)
[COLOR="Blue"]2013/11/18[/COLOR]
- Latest OmniROM4.4 source
- Android 4.4r1.1 (KRT16O)
- koush's opensource superuser
- annoying hardware keyboard is disabled
Know issues:
1. HDMI Dongle not handle
2. For some unknown reason, a few apks (eg. Browser) has distort screen after rotation. It can be recovered by doble click recent button.
Downloads: :highfive:
AFH: http://www.androidfilehost.com/?a=show&w=files&flid=10298
goo.im: http://goo.im/devs/daniel_hk/rom/omnirom
mirror1: http://pan.baidu.com/s/1cicXd#dir/path=/omnirom
Use the latest pa_gapps: http://d-h.st/users/TKruzze
Or http://forum.xda-developers.com/showthread.php?t=2012857
Recovery requirement
** CWM6, TWRP 2.3.1 or above is OK.
Most of the 4.4 Roms require the latest reovery with file_contexts and set_metadata support.I have patch the update-binary to work with old recoveries.
** See my thread to patch any gapps or ROMs with set_metadata fail **
Source:
kernel & device trees will update the new kernel soon after testing
github: https://github.com/danielhk?tab=repositories
Credits: :good:
** The OmniROM team who have such a good idea and their hardworks
** All those who donate to me. Giving me the resources to upgrade my PC and accessories!
** Thanks koush for the opensource superuser and widget
** All those who help our cool tab's developments!
Donations:

add tips
TIPS
1. Hidden Objects
In Settings > About
Other than hiting the build number 7 times to enable the Developer options.
Hitting the Android version 4 times will bring up the Android coide name slide.
Hit the CyanogenMod version 4 times will bring up the CyanogenMod Mascot. (not implemented yet in cm11)
Click to expand...
Click to collapse
2. The 4.4 Advanded Wi-Fi Menu
In Settings > Wi-Fi > menu key > Advenced
Disable Scanning always available will be safer and saving battery.
Enable Wi-Fi optimization will save some battery.
Click to expand...
Click to collapse
3. InCall screen orientation
The default "0" orientation of our tab is set at lanscape with the Samsung logo at right. It is hardwired in the kernel.
System apks like InCall screen will be forced to landscape. (the default 0 degree) Fixed
If you want InCall screen to rotate
We can use rotation apps (eg. Rotation Manager) to set the InCall and Dialer apk to auto-rotate.
Click to expand...
Click to collapse
4. Google+
If you don't have an account login to Google+, it would await and drain battery. Disable it if you don't need it. Other Google apps too.
Click to expand...
Click to collapse
5. GPU settings
New GPU settings is in: Settings > Perfromance > GPU Settings at left edge menu
Default steps of max. frequency is 267Mhz and 400Mhz. To enable extra steps (330Mhz and 440Mhz), you need to enable Vpll.
If you experience SOD, try increasing the min. frequency voltage.
At max. frequencies higher than 267Mhz, you might experience lost color sync. Pressing the power button twice would recover.
My working values: min. freq.=108Mhz @975mV, max. freq.=440Mhz @1150mV. :victory:
Click to expand...
Click to collapse

Are you a man or a machine?
Great work as usual!

I know this probably elementary, but what is the difference between this ROM and the other 4.4 one?

Superb rom cracker
Xda premium 4 apps

w1ll1m said:
Are you a man or a machine?
Great work as usual!
Click to expand...
Click to collapse
I'm a bio-android...
palexr said:
I know this probably elementary, but what is the difference between this ROM and the other 4.4 one?
Click to expand...
Click to collapse
It is a AOSP base rom. For details, visit the Omni team's page : http://omnirom.org/

last night i tried installing CM11 , but my tab always say "no sim card detected" , so, is the simcard issue will be fixed in this omni rom?

daniel_hk said:
This is a homemake(omni's term) build of the open ROM Omni4.4 for our Samsung GalaxyTab 7.7.
Although some features proposed(eg. Multiwindow) are not yet implement, it is worth trying and we are very lucky to follow this main stream!
2013/11/18
I planned for a AOSP build for some times. Right after my cm11 build, I found the first unofficial release of OmniROM4.4 at 11/18. That was the excelent timing. It really drew my attention to dig deeper. The repos are there and it's time now!
I already downloaded the source of AOSP from googlesource so It took only a few hours to sync the source (that would be quite good at my region). I already modified the device tree for AOSP earlier and it took me only a few hours to build it out! I never expected.that smooth. The Omni team are doing a really good job. :good:
AOSP base roms are slim and the overall is quite smooth. The only observable difference is the performance settings. I added koush's superuse which I think is essential. All issues in my cm-11 build inherent here
Change log: :victory:
Code:
[COLOR="Blue"]2013/11/18[/COLOR]
- Latest OmniROM4.4 source
- Android 4.4r1.1 (KRT16O)
- koush's opensource superuser
- annoying hardware keyboard is disabled
Know issues:
1. All issues in cm-11
2. GPS is not connected. (Seems the update from CM is not commit yet.)
3. setting custom auto-brightness level crash.
Downloads: :highfive:
goo.im: http://goo.im/devs/daniel_hk/rom/omnirom
mirror1: http://www.kuaipan.cn/file/id_39173572073096195.htm#kp|39173572073096439|0
mirror2: https://mega.co.nz/#F!5EY2iZoI!fk7mwylLMw0p7aCkD80HaA
mirror3: http://pan.baidu.com/s/1cicXd#dir/path=/omnirom
kernel: http://goo.im/devs/daniel_hk/rom/kernel
Use gapps for cm-11.0 : Check the gapps folder in the above links
Or the latest pa_gapps: http://goo.im/devs/paranoidandroid/roms/gapps
Recovery requirement
** CWM6, TWRP 2.3.1 or above is OK.
Most of the 4.4 Roms require the latest reovery with file_contexts and set_metadata support.I have patch the update-binary to work with old recoveries.
** See my thread to patch any gapps or ROMs with set_metadata fail **
Source:
kernel & device trees will update the Omni device trees soon after testing
github: https://github.com/danielhk?tab=repositories
Credits: :good:
** The OmniROM team who have such a good idea and their hardworks
** All those who donate to me. Giving me the resources to upgrade my PC and accessories!
** Thanks koush for the opensource superuser and widget
** All those who help our cool tab's developments!
Donations:
Click to expand...
Click to collapse
Thanx alot
thats great,
what bugs this rom has?
could you tell it more?

WoW KitKat for Tab7.7

Am I correct in guessing the wi-fi tethering is on the issues list for this version?

hillzx said:
last night i tried installing CM11 , but my tab always say "no sim card detected" , so, is the simcard issue will be fixed in this omni rom?
Click to expand...
Click to collapse
Strange, I didn't get that error? Works fine on mine.
daniel_hk said:
It is a AOSP base rom. For details, visit the Omni team's page : http://omnirom.org/
Click to expand...
Click to collapse
I guess I was wondering if one was better than other in some way? Is there an advantage to one over the other? Though I have to say that CM11 is working fantastically well.

I'm getting the same error as well. It says no sim card. I can make phone calls but no cellular data

I cannot get mobile data working on an i815. Says "No Service". I checked my mobile network settings and they look right. I went back to 4.2.2 and have LTE again. Tried this and CM11 and both have same issue. Clean flash both times.

Can someone report for a 6810 wifi only, if the cm11 or this variant performance better. Speed, fcs, battery?
Did some tried both?
Sent from my GT-P6810 using xda app-developers app

w1ll1m said:
Are you a man or a machine?
Great work as usual!
Click to expand...
Click to collapse
+1.

ekrazy said:
I'm getting the same error as well. It says no sim card. I can make phone calls but no cellular data
Click to expand...
Click to collapse
Mike02z said:
I cannot get mobile data working on an i815. Says "No Service". I checked my mobile network settings and they look right. I went back to 4.2.2 and have LTE again. Tried this and CM11 and both have same issue. Clean flash both times.
Click to expand...
Click to collapse
Same issue here , Otherwise lovely rom could be my daily driver if not for this small problem :good:

Thank you very much Daniel_hk for your effort and sharing.

Mike02z said:
I cannot get mobile data working on an i815. Says "No Service". I checked my mobile network settings and they look right. I went back to 4.2.2 and have LTE again. Tried this and CM11 and both have same issue. Clean flash both times.
Click to expand...
Click to collapse
same issue here, but I can't go back to 4.2.2 (such as PAC-Man ROM 4.2 Milestone1 release) with the newest TWRP, it displayed "P6800 || getprop("ro.build.product") error ececuting updater binary in zip......" and something like that.
P.S. about the mobile data, I found there is no APN profile in the system, so absolutely no data connection here as well, and I tried to create a new APN roles manually but it can't be saved when I finished, same issue has appeared in the previously version so I think may be there is something wrong with the file permission or else.

strong0 said:
same issue here, but I can't go back to 4.2.2 (such as PAC-Man ROM 4.2 Milestone1 release) with the newest TWRP, it displayed "P6800 || getprop("ro.build.product") error ececuting updater binary in zip......" and something like that.
P.S. about the mobile data, I found there is no APN profile in the system, so absolutely no data connection here as well, and I tried to create a new APN roles manually but it can't be saved when I finished, same issue has appeared in the previously version so I think may be there is something wrong with the file permission or else.
Click to expand...
Click to collapse
I have your answer. The twrp recovery source requires 4.4 to compile. The old update-binary is no longer supported.
In the mean time, you may following my other post to change the update-binary of you old ROMs and gapps.
http://forum.xda-developers.com/showthread.php?t=2532300
This one is backward compatible. You can flash the updated zip in old recoveries too.
We are in the transition period. Things will get better soon...
PS. Even though I'm stuck, sim card issue is the top priority...

daniel_hk said:
I have your answer. The twrp recovery source requires 4.4 to compile. The old update-binary is no longer supported.
In the mean time, you may following my other post to change the update-binary of you old ROMs and gapps.
http://forum.xda-developers.com/show...7#post47580997
This one is backward compatible. You can flash the updated zip in old recoveries too.
We are in the transition period. Things will get better soon...
PS. Even though I'm stuck, sim card issue is the top priority...
Click to expand...
Click to collapse
Thanks for your reply, but unfortunately the link you posted doesn't work now, I have re-flash the recovery to CWM and it can work properly. Hope we can have a stable version of Android 4.4 soon with your kindly help! :good:

[ROM][4.4.4r2]p6800/p6810/i815(12Dec2014)CarbonROM Kitkat Unofficial

I do not see the specific rom for i815 in the download links ?

insomnia said:
I do not see the specific rom for i815 in the download links ?
Click to expand...
Click to collapse
this link has i815 - AFH: http://www.androidfilehost.com/?w=files&flid=13964 good luck.:fingers-crossed:

Any particular gapps for 4.4.2 will work, right?
Does the camera work, with this ROM? Love SlimKat but the camera is blank =(

ngoonee said:
Any particular gapps for 4.4.2 will work, right?
Does the camera work, with this ROM? Love SlimKat but the camera is blank =(
Click to expand...
Click to collapse
I confirm camera working very well. I use slim gapps and it work.
Sent from my GT-P6800 using XDA Premium 4 mobile app
---------- Post added at 09:53 AM ---------- Previous post was at 09:25 AM ----------
This ROM more better then the other 4.4 ROM, stable, super fast and more important is on the searching network signal part. Even losing network signal after reboot. Thanks you very much for making this great ROM for our TAB.
Sent from my GT-P6800 using XDA Premium 4 mobile app

stenny said:
I confirm camera working very well. I use slim gapps and it work.
Sent from my GT-P6800 using XDA Premium 4 mobile app
---------- Post added at 09:53 AM ---------- Previous post was at 09:25 AM ----------
This ROM more better then the other 4.4 ROM, stable, super fast and more important is on the searching network signal part. Even losing network signal after reboot. Thanks you very much for making this great ROM for our TAB.
Sent from my GT-P6800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks, worked for me as well, but can't stay on this ROM as bluetooth headset doesn't work with media, only with calls. Same problem as Omni. Works on CM11 and SlimKat, but SlimKat camera doesn't work, so I'm trying CM11 now, looks good so far =)

Dear Daniel, I have install this CarbonROM on to my P6800. It works like a charm. But...i thinks it cannot charged well using my original charger as other ROM. Charging never increase battery level, tend to decrease. Finally it dried up my tab. Now i cannot turn on my tab and still cannot charge it. I have used this tab for 2 years and loved to try many of your masterpiece ROM on it. Any suggestion to turn it on? Thanks bro...

So far I have no problem using this ROM on my P6800. Charging working as normal... Been using this ROM since the day Daniel released it.
Sent from P6800 powered by OmniROM 4.4.2

I've given this a go on my P6810 and although basically good, I found one problem that was a deal breaker for me in that the bluetooth doesnt seem to work correctly. I could pair and connect with my external speaker (Minx Go) but the audio wasnt routed to the speaker.
Otherwise was a nice smooth rom with no other problems that I found. Ive gone back to the Cyanogen version for now.
Thanks for your efforts, I shall look for any updates. Got to say that bluetooth is a bit "flakey" on all the kit kat roms at the moment.

robt2379 said:
I've given this a go on my P6810 and although basically good, I found one problem that was a deal breaker for me in that the bluetooth doesnt seem to work correctly. I could pair and connect with my external speaker (Minx Go) but the audio wasnt routed to the speaker.
Otherwise was a nice smooth rom with no other problems that I found. Ive gone back to the Cyanogen version for now.
Thanks for your efforts, I shall look for any updates. Got to say that bluetooth is a bit "flakey" on all the kit kat roms at the moment.
Click to expand...
Click to collapse
SlimKat and CM11 work fine for Bluetooth media audio for me. SlimKat perfectly, cm11 works but more jumpy
Sent from my GT-P6800 using Tapatalk

I have found a problem with Slimkat/Carbon/CM11/Omni ROMs
The top and bottom mics are reversed; meaning that the top microphone (which should be for noise cancellation) is used as the main microphone and bottom microphone (which should be the main microphone) is used for noise cancellation.
I have tried all 4 ROMs today and they all have the exact same problem.
Previously only one microphone was active and you successfully fixed this Daniel by enabling both microphones, now we just need to reverse them to make them work properly.

set color for navigation bar??
Says its a feature but my dumb a$s can't find the setting.
So I guess if does not exist that would be great also since I couldn't find it!

I wonder if xposed installer and its applications can be used with this rom..

sas_sas said:
I wonder if xposed installer and its applications can be used with this rom..
Click to expand...
Click to collapse
I think it should be ok. I have used xposed on the CM 4.4.4r1 rom, as long as you are using Davlik and not ART for the runtime, it should be fine. I don't think Xposed is compatible with ART at the moment. I use the App Settings module, to set custom DPI values for various apps, also the greenify app has an Xposed module, which helps me to keep battery usage down and memory usage (I do this mainly for Real Racing 3 which is memory hungry).

Wow, a ROM from the future (7 July, today is 3rd July =p)

Hello guys,
Need to know the steps for flashing this ROM and GAPPS on a P6800.
Running stock 4.1.2 with root and CWM.
Thanks guys.

This is for someone who has a stock unrooted galaxy tab 7.7
This should be a full proof method of installing "first" a custom recovery and "second" a custom Kit kat rom.
Download all your files first.
1. Here is the link to Odin 3.07 -
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNEqmNw0ERcW4K3UlFV7WKUotUiStw
When you go to this link it will give you the choice to open or save the file - I always download the file then extract it to a folder on my desktop named Odin.
2. Here is the link to TWRP v.2.7.1.0 -
http://www.androidfilehost.com/?fid=23501681358545485
When you go to this link you will need to select the download option on the page. A ten second timer will count down and then give you a few options to download from. Just select the first one for your download.
3. Here is the link for your selected rom -
http://www.androidfilehost.com/?fid=23501681358556281
When you go to this link you will need to select the download option on the page. It will give you the choice to open or save the file - SAVE is what you do.
4. Here is the link to the gapps file you will need.
http://www.androidfilehost.com/?w=files&flid=15797 choose stock!
Again select download and choose to save.
We now have the four files we need to install this custom rom. Please copy the files from steps 3 and 4 to a micro sd card. Place the card into your tablet.
Time to INSTALL!!!
1. If you have not already - unzip the first file "Odin 3.07" to a folder on your desktop PC.
2. Press and hold the volume down and power button together and hold until a screen appears (other then a battery display or SAMSUNG) then let go of both. The screen should say something like "Warning!! A custom OS blah blah .. it will also say "Volume up: Continue".
3. Press the volume up choice. The screen should change to the little android and say downloading. This is known as "odin mode" and also referred to as "downloading mode" .
4. Now plug in the tablet transfer cable to the tablet and the PC. Open the Odin folder and double click the Odin3 v3.07 executable. Give the program permission to open if needed. Once open, Look for id:com - right above that you should see something like 0:[COM6](it might be another number then 6 this is all Good). If you do see this then you know you are connected.
In the option area you will see two options selected. Deselect Auto reboot leaving F. Reset Time the only one selected. To the right of this click the PDA button. This is where you will select the "TRWP v.2.7.1.0" file you downloaded on step 2. Once you select the twrp file, and you press open, the option for PDA will now have a check mark next to it. Now you can Press Start and let it run till you see "RESET!" at the top left of the Odin window and also you will see RES OK! in the message area (bottom left).
5. Disconnect the tablet from the transfer cable. Now Press the Power and Volume Up buttons together until you see the TEAMWIN window - release the buttons. This will take you into your newly installed twrp custom recovery. If the screen goes black while using the software, just touch it to wake.
6. Select WIPE
7. Select Format Data - type yes and press return on the keyboard - when it is done formatting choose the house icon to go back to the home screen.
8. Select Install - Navigate to your external sdcard and select the Carbon rom you downloaded in step 3.
9. Now select "add a zip" and choose the GAPPS file we downloaded in step 4.
10. Now use the "Swipe to Start" and allow the 2 files to install. When they finish you will have three choices.
11. First select wipe on the left - when it finishes select reboot.
Give it some time and you will eventually get to your carbon setup screen.
---------- Post added at 09:40 PM ---------- Previous post was at 09:38 PM ----------
ngoonee said:
Wow, a ROM from the future (7 July, today is 3rd July =p)
Click to expand...
Click to collapse
dont get it?

Hello,
I did everything you mentioned, but I'm using CWM instead of TWRP. Unfortunately though, when the Tab goes up I get two main crashes: Google Location, Setup Wizard, AOSP keyboard etc...
Any thoughts on that?
@ @daniel_hk, would appreciate your support on the matter.

sergani said:
Hello,
I did everything you mentioned, but I'm using CWM instead of TWRP. Unfortunately though, when the Tab goes up I get two main crashes: Google Location, Setup Wizard, AOSP keyboard etc...
Any thoughts on that?
@ @daniel_hk, would appreciate your support on the matter.
Click to expand...
Click to collapse
Change out to this GAPPS
http://www.androidfilehost.com/?fid=23501681358554547

exfat works, so I love it better than omniroms.
BTW, Is there a way to fix signal db ?
I get like 1000db on status.

[ROM][p6800/p6810/i815](6Oct2015)CyanogenMod 12.1 Unofficial

This is an unoffical experimental build of CyanogenMod 12 for GalaxyTab-7.7. Let's have the first taste of the colorful Lollipop.
CarbonLP is the winner. It is out now. Check the thread.
Release Note
2015/10/6
I just sync the marshmallow trees. That means the end of lollipop. I haven't update CM for a while because there is no significant improvement. I got an OTG last week. Finally, I can complete the support of it. USB storage is included in Strorage settings now. This is probably the last cm-12.1. It is Android-5.1.1_r24 (LMY48W). Enjoy the last lick.
2015/8/26
This build included a few extra things need to patch after the hard drive crash. The security breach in Android is fixed and some modification in media driver to make it more stable. Upper speaker is working in phone calls now. cheers!
2015/7/23
This is the test build after I reconfigured my hard drive AGAIN. Start again is always difficult but wiser. Finally, I have the "motivation" to face the few things squeezed down in the do list for a long long time... [emoji14]
I renewed the private lib for the wifi driver of the Athero chip. Now we can keep up with the current wpa_supplicant. The wifi ssid and password can restored now. I also set the default platform orientation to portrait (you may notice it from the boot animation). Rotations, call-screen and a few apps would behave like a phone (portrait) now. Note that this is a platform setting, it won't affect the kernel default. Recovery will behave as before. The SuperSU (if installed) entry is restored in settings.
The RIL library is also outdated now. The top speaker doesn't work during calls but bottom speakers and wire headsets are OK. Furthermore, phone calls would sometimes corrupt the audio driver... I think the next move would be keeping up with the current RIL...
Anyway, this is a quite stable build and almost all of the features are working now. Cheers.
History
2015/6/6
It's been quite a long time. Finally, the H/W decoder is fixed. cheers!
2015/5/2
cm-12.1 merge android-5.1.1_r1 now. The image method is no longer working. In this build, I use the old method in the zip. It might take longer (up to 10 min.) to flash but no more can't flash. 5.1.1 is quite stable. Lollipop is getting better and more stable now.
2015/4/19
cm-12.1 merge android-5.1.0_r5 now. In this build, I pick up the loose ends. GPS and some sensors are OK now.
Some p6800 owner reported failing to flash, I add the "a" version which use the old method in the zip. Those can't flash may try the "a" version. Cheers!
2015/4/4
Finally got cm-12.1 working. There are still some issues but it is quite presentable. PerformanceControl is included, bluetooth and wifi-tethering is working. Cheers!
2015/3/14
Struggling for a few weeks for the stability. Anyway, it's a time for a new build. zRam support is added to PerformanceControl.
5.1 was out last week. Omni was the first custom rom merging 5.1. I managed to build it out with little effort. Still have some glitches as expected but it is quite stable. I plan to release the experimental build shortly.
2015/2/25
The torch in QuickSettings is fixed. I knew it wasn't a decent job so I wait..(for too long). It took me a few days to find a neat way and has minimal changes to the original source. That's the final piece, Yeah! :highfive:
2015/2/14
Although some commits gave me hard times, CM is getting stable now. Rush this out before the Lunar New Year. This long holiday, I'll take another look at the kernel and the SailFish OS...
2015/2/7
CM is adding its own features and gain quite some weight... Having hard time for a new feature which cause boot loop. Finally, I put a workaround to make it boot.
2015/1/25
I studied the newer (3.10.y and 3.14.y) kernel sources for a few days and nights. It is surely a mine field... Will start when my mind is ready. Only minor changes in cm-12.0 but it's about time for a new release. Cheers!
2015/1/10
It was a productive week. I finally unlock the last piece, mobiledata. After updating the RIL blobs and the opensource driver, I realized that the kernel also needed upgrade. I searched the Linux kernel.org and found a few essential commits. I cherry pick them and resolved the conflicts. Finally, mobiledata is workig now! Cheers!!! :victory:
This prove that our existing 3.0.y kernel is really outdated. Instead of bandages, I plan to make a new kernel for our tab. The latest stable 3.18.y is too far. I might start with the Linux 3.14.y which has LTS. If I success, it will probably the newest kernel for Android.
Those who familiar with Linux kernel are welcome to help!
2015/1/4
Happy new year! This is the first release in 2015. Found a bug in Bluez and it can turn off now. SCO and APTX modules are added.
I finally make the InCall screen rotatable. The only major issue left would be mobiledata. I think I fond the reason by not fixed yet.
Lollipop source gain a lot of weight. It took 5 hrs. for single build! My PC really need an upgrade.
2014/11/29
The new Lollipop has no decent manual. It took me a lot of time to study the source. Clearly it takes time to grow. Before going back to my final Kitkats, I biuld the alpha release. All models are inclued. Happy licking!
2014/11/18
After a few days and nights, I finally located the annoying bootloop issue at every boot. It is a barely presentable cm-12.0 now. Other than the listed issues, all the new UI features are working. Enjoy!
Change log: :victory:
Code:
[COLOR="Blue"]2015/10/6[/COLOR]
- latest cm-12.1 (LVY48F) Android 5.1.1_r18
- Fix Wifi hotspot
- Fix light sensor
- Fully support OTG USB storage
- Add charging mode in USB settings
- Keep up with the Bluetooth apk
- Latest Bluez 5.25
[COLOR="Blue"]2015/7/23[/COLOR]
- latest cm-12.1 (LMY48G) Android 5.1.1_r6
- New private lib for Atheros chip
- Restore the SuperSU entry in settings.
- Default platform orientation to portrait (270 degree)
- redo default hardware keyboard on
- redo the torch in QS
- Patch latest Bluez update 5.23
[COLOR="Blue"]2015/6/6[/COLOR]
- latest cm-12.1 (LMY48B) Android 5.1.1_r3
- H/W decoder
- latest Bluez update
[COLOR="Blue"]2015/5/2[/COLOR]
- latest cm-12.1 (LMY47V) Android 5.1.1_r1
- fix torch in QS
- default hardware keyboard on
- latest Bluez update
[COLOR="Blue"]2015/4/19[/COLOR]
- latest cm-12.1 (LMY47O) Android 5.1.0_r5
- add support for non PIE blobs. (GPS and some sensors)
- InCall screen is portrait now
- latest Bluez update
[COLOR="Blue"]2015/4/4[/COLOR]
- cm-12.1 (LMY47I) Android 5.1.0_r3
- Fix rotation in settings and QS
- Fix torch in QS
- first port of Bluez to Android 5.1
- Wifi-tethering working
- built-in su (superuser) is partially working
[COLOR="Blue"]2015/3/14[/COLOR]
- add zRam support in PerformanceControl.
- Replace some codes with AOSP which seems more stable.
- Version update from Bluez
[COLOR="Blue"]2015/2/25[/COLOR]
- fixed the Torch in QS. A new FlashDevice is deployed and new approach in TorchService.
- Add flash support in camera HAL. Besides sysfs, all other torch apps would work now.
- Fix the new commit for MMS
- re-enable adb which cm-12.0 is recently disabled
- healthd patch. Avoiding reboot at 5min. when charging in power off.
- Bluetooth update
[COLOR="Blue"]2015/2/14[/COLOR]
- revert the minikin commit to stop boot loop
- Stable status bar and Notification features
- manage to deploy the original Makefile
- Major Bluetooth update
[COLOR="Blue"]2015/2/7[/COLOR]
- Latest CM source
- Modify build script for kernel
- platform patch for BlurLayer
- Bluetooth update
- New layout for landscape InCallUI
[COLOR="Blue"]2015/1/25[/COLOR]
- Modify device tree bootimg.mk for new source
- gcc 4.8.2 tool chain for kernel
- New boot animation
- Theme engine
- Minor fix in Performance Control
- Bluetooth update.
[COLOR="Blue"]2015/1/10[/COLOR]
- mobiledata is working now. Cheers!
- kernel fix for gcc 4.8 and above.
- kernel net driver update and patches.
- various kernel patches.
- Bluetooth update. Add SCO and APTX support
- Fix horizontal InCall screen crash
- performance control, add tools support for i815 and tab plus.
[COLOR="Blue"]2015/1/4[/COLOR]
- latest CM-12.0 source, Android 5.0.2_r1 (LRX22G)
- Fixed Bluetooth can't turn off issue.
- Enable soft keyboard by default.
- InCall Screen is rotatable now.
- Update the kernele Mali driver to r3p2-01rel4 and some kernel mod.
- some blob update from other Samsung devices' KK rom.
- Use opensouce RIL libraries, mobile data still not working... :(
[COLOR="Blue"]2014/11/29[/COLOR]
- latest CM-12.0 source, Android 5.0.0_r7 (LRX21Q)
- BLuez port for Lollipop. Working but can't stop after started.
- New RIL libraries hacked from i9300, mobile data still not working...
- Add the PerformanceControl app for our devices (needed ROOT)
- disable PIE checking to allow old executable blobs
- Rotation glitch is fixed. No more flickering when rotation.
[COLOR="Blue"]2014/11/18[/COLOR]
- Current CM-12.0 source, Android 5.0.0_r6 (LRX21Q)
- Initial port for Framework, OpenGL and RIL libraries
- Add CMFileManager and Home
- First BLuez port for Lollipop.
- Open source RIL library
- Fix the bootloop at start.
Know issues:
1. send file via wifi crash
Downloads: :highfive:
hosts: AndroidFileHost, Dev-Host
mirror: 百度网盘 ***Request from China.
Gapps: http://forum.xda-developers.com/showthread.php?t=2997368
To root: built-in su can be enabled in: Settings > Developer options > Root access , enable apps and/or adb
(root access in advance menu of privacy Guard can manager the allowed list.)
Or download the recovery flushable ZIP from chainfire.eu
Source:
github: https://github.com/danielhk?tab=repositories
Credits: :good:
** The CyanogenMod Team who keep many devices alive!
** All those who donate to me. Giving me the resources to upgrade my PC and accessories!
** The Bluez team who makes bluetooth possible in old devices!
** @Chainfire for the great SuperSU
Donations:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

　　　　　
Antutu score: >19k at 1.6Ghz,GPU266　>20k at 1.6G, GPU400Mhz, New record in AnTutu5.5: 21953!
　　　　　　　　　　　　　　　　　　　　　　　　
Lock screen　　　　 　　 　New recent apps　　　 　　 Notifications and status　 　 New Settings screen
　　　　　　　　　　　　　　　　　　　　　　　　
About settings　 　 　　　　Battery status　　　　　　　Dialer screen　　　 　 　 　 To show software keyboard, click hardware switch.

first!! Thanks for sharing this daniel_hk !!! i think if you repartition the p6810, you can use p6800 roms or?? great one, thanks for supporting this 3 year old device!!!

Many thanks for your continued support on the 6800 devices, much appreciated
Donation made, as promised, hope you've received it!

woah! this might be the best thing happened with this device i cant believe that you can go this far, keep up the good work!
downloading and testing now
EDIT: here's some initial impressions:
- initial boot took very long - almost 10 mins
- pretty stable, almost everything is working which is very nice
- sttuters everywhere, pretty much as your KK roms, probably caused by an old kernel
- YouTube video doesnt play at any resolution, the sound does play though, gonna test another video playback
- there's no option to turn off battery percentage on the statusbar
gonna use this ROM for daily driver for now :highfive:
by the way, im curious about your DPI choice, why it is not 213? i found 213 are easier for my eye

cant open zip, it says that its not good? would like to get it to run on the wifi model *_* @rezaswandira whede did you download the rom? gooim or the cinese one?

prohackerbro said:
cant open zip, it says that its not good? would like to get it to run on the wifi model *_* @rezaswandira whede did you download the rom? gooim or the cinese one?
Click to expand...
Click to collapse
the chinese one.. the zip on gooim looks suspicious since its only 19MB or so, so i tried the chinese one

rezaswandira said:
the chinese one.. the zip on gooim looks suspicious since its only 19MB or so, so i tried the chinese one
Click to expand...
Click to collapse
jep youre right... will try to somehow get it running on the p6810. great work daniel, but is the new flashable zip format somehow different? dont see any files in the /system (only bin) but a big file in the root of the zip...(cant acess sys files:silly.... sorry if i missed something

Very weird for me as I cannot get the keyboard to appear to enter my wifi password.
I note that the H+ symbol appears on my mobile, so not sure if that is picking up mobile data or just a red herring.
I did use another universal gapps -> http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
So maybe I am causing my own problems, but the gapps work on my oneplus without any issue.

scoobydu said:
Very weird for me as I cannot get the keyboard to appear to enter my wifi password.
I note that the H+ symbol appears on my mobile, so not sure if that is picking up mobile data or just a red herring.
I did use another universal gapps -> http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
So maybe I am causing my own problems, but the gapps work on my oneplus without any issue.
Click to expand...
Click to collapse
Pay attention to the OP, its a known issue and there's a workaround to fix it
Simply skip everything in the setup guide and go to settings to enable the keyboard, then add your google account

prohackerbro said:
jep youre right... will try to somehow get it running on the p6810. great work daniel, but is the new flashable zip format somehow different? dont see any files in the /system (only bin) but a big file in the root of the zip...(cant acess sys files:silly.... sorry if i missed something
Click to expand...
Click to collapse
Yeah, the new zip has different format. It's an system image. This way is faster and no need to set permission afterward.
Lollipop use the ART which take longer to boot at the first time.
scoobydu said:
Very weird for me as I cannot get the keyboard to appear to enter my wifi password.
I note that the H+ symbol appears on my mobile, so not sure if that is picking up mobile data or just a red herring.
I did use another universal gapps -> http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
So maybe I am causing my own problems, but the gapps work on my oneplus without any issue.
Click to expand...
Click to collapse
The file in goo.im is ok. ~200M. It might take time to refresh.
See if you can see/edit APN. You can have mobile data if you can access APN.
rezaswandira said:
the chinese one.. the zip on gooim looks suspicious since its only 19MB or so, so i tried the chinese one
Click to expand...
Click to collapse
Take a look at the last screenshot in post#2. It show you how to enable the keyboard.
Good luck guys.

rezaswandira said:
Pay attention to the OP, its a known issue and there's a workaround to fix it
Simply skip everything in the setup guide and go to settings to enable the keyboard, then add your google account
Click to expand...
Click to collapse
Perhaps you can show me it in the OP, as I have looked again and cannot see it as a known issue in the first post?
Know issues:
1. GPS (seems the blob is not working in 5.0...)
2. Mobiledata is not working but Phone calls are OK. (Can't access APN...)
3. Bluez claimed the support for 5.0 (may be the Bluetooth apk from CM is not compatible)
4. Glitch during rotation as before (Can't keep up the new OpenGL, Old patch can only reduce it)
5. No Root solution for non-Nexus devices now.
Click to expand...
Click to collapse
I don't go looking at screenshots for clues as to issues with ROM's, but it seems I might have too, if that is what you are referring too, as so obvious??
---------- Post added at 09:31 AM ---------- Previous post was at 09:21 AM ----------
daniel_hk said:
The file in goo.im is ok. ~200M. It might take time to refresh.
See if you can see/edit APN. You can have mobile data if you can access APN.
Take a look at the last screenshot in post#2. It show you how to enable the keyboard.
Good luck guys.
Click to expand...
Click to collapse
Downloaded from goo 3 times and each time the file would not flash. Chinese site the file flashed first time. File sizes looked the same on disk.
Will give the APN a try.
Edit: I can edit the APN.
I guess its not about enabling it (as I know how to do that), its about enabling it after you have have skipped the complete setup, which I know goes to mobile data without wifi, which I don't have on this device.
I assume it will just error out and continue, as others have succeeded. Will give it a go.
Edit: It progresses without error.
Edit: Overall this is much smoother than the CM11 build, so I am going to give it a go as my daily as well
Edit: Wondering if the latest SuperSU beta helps in gain root? Will do some reading..
Thanks.

rezaswandira said:
the chinese one.. the zip on gooim looks suspicious since its only 19MB or so, so i tried the chinese one
Click to expand...
Click to collapse
daniel_hk said:
Yeah, the new zip has different format. It's an system image. This way is faster and no need to set permission afterward.
Lollipop use the ART which take longer to boot at the first time.
The file in goo.im is ok. ~200M. It might take time to refresh.
See if you can see/edit APN. You can have mobile data if you can access APN.
Take a look at the last screenshot in post#2. It show you how to enable the keyboard.
Good luck guys.
Click to expand...
Click to collapse
tryed to port to p6810, the bootlogo freezes after a couple of minutes, is this normal?

Same problem .. zip file problem
(bad)
Installation aborted (chinese download too)...
There is other mirror or correct file?
Thank you

I've used Chainfires latest beta of SuperSU 2.23 and have root for sd maid and others.
Seems some apps are not working according to his thread, but the few I use seem to be ok.
I can also edit the APN, so looks great to me (although i have not put data credit on my sim yet to try )
Very smooth build, thanks for that.
Edit: @prohackerbro the version for 6800 has frozen a couple of time for me on the cynogenmod boot logo, but a reboot allowed things to progress further.
@pinele the Chinese one worked fine for me, did you try a couple of times?

scoobydu said:
I've used Chainfires latest beta of SuperSU 2.23 and have root for sd maid and others.
Seems some apps are not working according to his thread, but the few I use seem to be ok.
I can also edit the APN, so looks great to me (although i have not put data credit on my sim yet to try )
Very smooth build, thanks for that.
Edit: @prohackerbro the version for 6800 has frozen a couple of time for me on the cynogenmod boot logo, but a reboot allowed things to progress further.
@pinele the Chinese one worked fine for me, did you try a couple of times?
Click to expand...
Click to collapse
oh okay, so thats normal. im gonna try to reboot more imes now ;D

prohackerbro said:
tryed to port to p6810, the bootlogo freezes after a couple of minutes, is this normal?
Click to expand...
Click to collapse
As those issues are not so important, I'll make this experimental build official.
I will post an update with all models later (hoping in next week).
pinele said:
Same problem .. zip file problem
(bad)
Installation aborted (chinese download too)...
There is other mirror or correct file?
Thank you
Click to expand...
Click to collapse
goo.im hate me. I can't check the md5 and uploading is not stable.
Anyway, I uploaded the file to AFH and reuploaded to goo.im. AFH has md5 checksum to verify..
scoobydu said:
I've used Chainfires latest beta of SuperSU 2.23 and have root for sd maid and others.
Seems some apps are not working according to his thread, but the few I use seem to be ok.
I can also edit the APN, so looks great to me (although i have not put data credit on my sim yet to try )
Very smooth build, thanks for that.
Edit: @prohackerbro the version for 6800 has frozen a couple of time for me on the cynogenmod boot logo, but a reboot allowed things to progress further.
@pinele the Chinese one worked fine for me, did you try a couple of times?
Click to expand...
Click to collapse
I'm quite sure chainfire will get the job done!

prohackerbro said:
oh okay, so thats normal. im gonna try to reboot more imes now ;D
Click to expand...
Click to collapse
okay got it to work on wifi model, but it freezes sometimes, had to reboot 2 times now, im gonna try to install the gapps, wifi works, didnt try the rest because of this freezing. is there any undervolt;overclock.... enabled on this rom @daniel_hk ?
EDIT: correction

I'm going to give this ROM a try! Yesterday I tried an experimental CM12 on a TMobile Note 3 and found it surprisingly usable. When using the TMobile ROM some apps would force close but if older versions of those apps were used (ICS-era) for example, the apps would run fine.
Off we go!
UPDATE: This rom is great! WiFi is fast, works on 5GHz, camera took a picture. SuperSU 2.25 installed via .zip works, have root. ES File manager (lastest version) is working fine.
I notice the screen breaks up sometimes when rotating the screen. The breakup appears as a bunch of little vertical lines on the screen. It almost looks like an effect.
Off to have some more fun!
UPDATE2: Video output seems to be not working: YouTube, Dice Player, Gallery. As another poster indicated, I too get sound, no video -- streaming or local. Might try a fresh reinstall.

P6800 just refuse to die... Thanks Daniel...

Database Develop

welcome