Related
Hello
I have developed a tool to rotate the screen and emulate a joystick using the accelerometer.
Everything here:
"webs.ono.com/shift/"
ATTENTION:
Only tested on XP
Regards
Great to find someone developing with Shift device in mind!
Unfortunately your link is not accessible right now! (wrong link? server down?)
GSensoR in Windows 7
Hi,
I try to install your application and driver. I follow it step by step till I finish to install first 2 file. But I struck on step to setting in control panel. I can not find "Game Devices" on my Windows 7 control panel. Could you suggest? I try to run last file (Gsensor). It pop up error that missing driver PPjoyIO.sys (if I'm not remember it wrong). Could you advice how to solve this problem. Thank in advance
unapproachable2kx said:
Great to find someone developing with Shift device in mind!
Unfortunately your link is not accessible right now! (wrong link? server down?)
Click to expand...
Click to collapse
server down,Sorry, try again
poltep said:
Hi,
I try to install your application and driver. I follow it step by step till I finish to install first 2 file. But I struck on step to setting in control panel. I can not find "Game Devices" on my Windows 7 control panel. Could you suggest? I try to run last file (Gsensor). It pop up error that missing driver PPjoyIO.sys (if I'm not remember it wrong). Could you advice how to solve this problem. Thank in advance
Click to expand...
Click to collapse
you must install it in xp compatibility mode
please read this:
"foro.todopocketpc.com/showthread.php?p=1536186"
regards
Ok tested so far so good joystick is working!
I also have irotate (winxp) video is rotating as yours!
Does it is supported under Win7 too?
Definitly recommended to all shift users!
thank you!
I can't install "GSensorR" on win 7 home premium
I'll give you my feedback everything works good but Gsensor is craching every time I resume from hibernation.
And I cannot make it run on windows 7.
Regards
Thanks for this excellent app! It's running fine on my Windows 7 installation, I just set it to XP compatibility mode during the installation process.
I got it working with WinUAE (Amiga Emulator) aswell
I cant make it run in windows 7 can you describe every step you did?
unapproachable2kx said:
I cant make it run in windows 7 can you describe every step you did?
Click to expand...
Click to collapse
I just used Google Translate to translate the guide into english and followed it to the point:
http://tinyurl.com/32ctocu and http://tinyurl.com/2v9o455
I set all three files to XP compatibility mode before running them though.
Let me know how it works out for you
Ok it works! Thanks pptan and khals! One question: how can I rotate screen in windows 7? Is it impossible?
Rotation for ours Intel GMA is disabled in windows 7 env. , I still need to understand if this lock is on drivers or Windows 7 registry.
Once unlocked it will work same as XP.
If some other is trying this please let us know here about some progress.
My actual test driver is 8.14.10.1930 on win7 ultimate
Does it work for Vista?
is there any way to run Gsensor.exe with rotation enabled first not joystick?
g-sensor & vista
Sheepster said:
Does it work for Vista?
Click to expand...
Click to collapse
not for the moment.
dlportio and ppjoy, both installed with no probs with winxp compatibility and as administrator.
virtual joy shows up in properties.
unfortunately try running gsensor-r brings up an error:
run-time error '6':
overflow
does anyone knows a way around this?
G.E.O. said:
not for the moment.
dlportio and ppjoy, both installed with no probs with winxp compatibility and as administrator.
virtual joy shows up in properties.
unfortunately try running gsensor-r brings up an error:
run-time error '6':
overflow
does anyone knows a way around this?
Click to expand...
Click to collapse
Run programs in "xp compatibility mode", it may help.
dannyt84 said:
Run programs in "xp compatibility mode", it may help.
Click to expand...
Click to collapse
No that didn't work.
I guess the problem is Vista... as always!
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
SG_Shadow said:
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
Click to expand...
Click to collapse
plug your phone in
get working drivers
install linux, it works better
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problem
Click to expand...
Click to collapse
[*]plug your phone in
[*]get working drivers
[*]install linux, it works better
Click to expand...
Click to collapse
u forgot a step.
[*]post in the correct forum
Firerat said:
plug your phone in
get working drivers
install linux, it works better
Click to expand...
Click to collapse
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Daneshm90 said:
u forgot a step.
[*]post in the correct forum
Click to expand...
Click to collapse
Fail!
SG_Shadow said:
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Fail!
Click to expand...
Click to collapse
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
This IS in the wrong forum.
Moved.
Firerat said:
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
Click to expand...
Click to collapse
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
SG_Shadow said:
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
Click to expand...
Click to collapse
you posted a couple of hours ago, duplicating posts might be considered spam
you didn't really give any useful information in your post(s)
and if I were to assume your were, then this is just some boring role play thing at a job interview or something, as you wouldn't really need anyones help on this.
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
ivanmmj said:
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
Click to expand...
Click to collapse
Thank you for trying to "actually" assist me. I am using the exact same usb cable on purpose to rule that out as a reason. I've also recently update both computers to the latest norton antivirus. Like I stated the drivers install on the laptop and I'm able to connect the G1 for file transfers, so I assume the driver is working but when I type in adb device or adb shell in cmd, I get the no device msg. I'm really stumped with this one...
*Update* My norton did remove adb.exe from windows\system32 on both computers, but I was able to restore that file on both. Like I said, my pc works just fine, laptop no good...
And point 3
Install linux ( ubuntu 10.4 )
Just give it 10gb
It will eliminate hardware faults as being the problem
The android developer has a tutorial for 10.4, so it should be easy
( no need for drivers, aparently 10.4 ships with the android udev rule )
the driver for file transfer isnt the same as the driver for adb....so your logic is flawed
seriously tho, use linux...wubi is pretty good now and u only need 4-10gb if u are only using it for android stuff
in my experience, windows, especially where norton is used, randomly breaks adb
The file transfer is done using the standard windows mass storage driver, not an android specific driver. Even if it's the same norton, try disabling it and see what happens. Also, trying removing the driver completely and reinstalling it again. I've had the issue happen also only when in windows and it's always something random.
virtualbox _should_ ( I think ) let you 'see' the Android Phone regardless of the drivers being installed on the Windows host
But, I have not tested that
Did you ever get this to work, I have the same issue?
I'm having the same issue, I'm trying to use ADB with my TF300T from a Windows 7 64 bit system. Always get the error adb error.
I have a couple of questions will this work correctly with a 64bit O.S?
Also the part of the instructions that reference SDCARD are they talking about the directory on my ASUS /sdcard/ or are they talking about the physical card?
Just need to know does it require you to have a sdcard in the ASUS to use adb?
May sound like fundamental questions to a lot of you, however I have combed through these forums as well as others all over the web, and the majority of instructions seem to be lacking the basics.
Thank you,
I have Ubuntu at work should I run ADB through this?
I have Ubuntu at work
It's a bit of a process according to the instructions that I have on the
screen right now to setup ADB through this, is there any gotchas that I should
know about before attempting this?
This is running on a VM on one of my servers. What I'm looking for is any known compatibility issues with versions of ADB and the Asus TF300T running .26
Thanks in advance.
Nordis
I followed the LG Revo downgrade instructions pricisely but when attempting to register the vs910.dll after moving it to the newly created Models folder within C:\LG Electronics\LGNPST\ directory, I get the following error:
"The module vs910.dll was loaded but the call to DllRegisterServer failed with error code 0x80020009."
Can someone help?
Had same error on x64 bit system, I wasn't able to fix it though, I had to use a x32 version of windows on another computer. :/
From http://forum.xda-developers.com/showthread.php?t=1211295&page=2
open CMD with Admin privileges and then type
Code:
regsvr32.exe "C:\LG Electronics\LGNPST\Models\VS910.dll"
Click to expand...
Click to collapse
I was having the same problem, did this with no issues.
Code:
regsvr32.exe "C:\LG Electronics\LGNPST\Models\VS910.dll
Use the code i have posted, the one above has a typo. Make sure you check "run task with administrative privileges" in the "create new task" box as stated above.
Framework43 Had same error on x64 bit system, I wasn't able to fix it though, I had to use a x32 version of windows on another computer. :/
Click to expand...
Click to collapse
I got this to work on Windows 8 x64, so I don't think there is a problem with the type of Windows you have installed, but some problem somewhere else.
Thanks for the catch, I forgot they had the wrong code in the link. Fixed.
thank you
wow, that was awesome guys thanks so much, worked like a charm!!!
Now if someone could only figure out how to Root v6 so we don't have to do this downgrade nonsense....
I ran into the same issue, but started XP Mode on my Win7x64 tied in the usb port with the phone and everything went perfectly - rooted and installed Revolt mod in no time
follow up question
ok so now that I got that dll properly registered, I tried to root using Superoneclick but kept getting permission denied error so I did it manually through ADB and I think it worked, but after downloading SU and running it, it tells me I need to update my SU binary but whenever I try, the program crashes...help again!
I couldn't get the newest version of S1C to work, or the ABD method. It appeared to work in ABD, but would crash Superuser. I ended up using S1C v1.63 and it worked just fine for me.
Try using superoneclick version 1.7 and use the rageagainstthecage exploit if you're having issues with root. Make sure all antivirus is disabled before downloading and installing.
Go to clockwork recovery and do the "fix permissions" procedure. That might help, it did on a Thunderbolt today that had problems updating the su binary. Do rooted programs work?
dbeauch said:
ok so now that I got that dll properly registered, I tried to root using Superoneclick but kept getting permission denied error so I did it manually through ADB and I think it worked, but after downloading SU and running it, it tells me I need to update my SU binary but whenever I try, the program crashes...help again!
Click to expand...
Click to collapse
You can't use the latest version, you need version 1.7. Also, when you connect the phone to the computer, you need to pull down the notification menu and select "Internet Connection." USB Debugging will NOT start in "Mass Storage" or "Charge Only."
adrenaline_rush said:
Try using superoneclick version 1.7 and use the rageagainstthecage exploit if you're having issues with root. Make sure all antivirus is disabled before downloading and installing.
Go to clockwork recovery and do the "fix permissions" procedure. That might help, it did on a Thunderbolt today that had problems updating the su binary. Do rooted programs work?
Click to expand...
Click to collapse
I used S1C version 1.7 also - could not get it rooted otherwise. Also had to mess with the "Debugging Mode" to make it work - turn it off, then quickly turn back on when at Step 6. Once I did that, everything worked perfectly.
dbeauch said:
I followed the LG Revo downgrade instructions pricisely but when attempting to register the vs910.dll after moving it to the newly created Models folder within C:\LG Electronics\LGNPST\ directory, I get the following error:
"The module vs910.dll was loaded but the call to DllRegisterServer failed with error code 0x80020009."
Can someone help?
Click to expand...
Click to collapse
THIS IS BULLCRAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!
CAN'T MOVE BACK TO 2.3.4 BECAUSE I CAN'T GET A DANG THING TO WORK. First, the components msi file wouldn't install because of some error code, plus i could never get VS810.dll to register. Even did research online, and found that people running 64 bit os were having trouble, so i used my 32 bit os computer BUT STILL DIDN'T WORK ... BEYOND USING A 32 BIT OS, I FOUND NO SOLUTION ON THE ENTIRE WORLD WIDE WEB TO GET THIS TO WORK!!!!!!!
wncoulte said:
THIS IS BULLCRAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!
CAN'T MOVE BACK TO 2.3.4 BECAUSE I CAN'T GET A DANG THING TO WORK. First, the components msi file wouldn't install because of some error code, plus i could never get VS810.dll to register. Even did research online, and found that people running 64 bit os were having trouble, so i used my 32 bit os computer BUT STILL DIDN'T WORK ... BEYOND USING A 32 BIT OS, I FOUND NO SOLUTION ON THE ENTIRE WORLD WIDE WEB TO GET THIS TO WORK!!!!!!!
Click to expand...
Click to collapse
I had an issue getting the "VS910.dll" to register also. What worked for me was diabling the user account controls in windows. After you do that will have to restart your computer. Then it should register just fin
Sent from LG Revo Stock ZV8 Using XDA App
SnoeDogg said:
I had an issue getting the "VS910.dll" to register also. What worked for me was diabling the user account controls in windows. After you do that will have to restart your computer. Then it should register just fin
Sent from LG Revo Stock ZV8 Using XDA App
Click to expand...
Click to collapse
^^^^^
What he said... i just explained the process in another post in the developement section
Sent from my VS910 4G using XDA
kcarden said:
^^^^^
What he said... i just explained the process in another post in the developement section
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
how to do this in windows 8 please
dbeauch said:
I followed the LG Revo downgrade instructions pricisely but when attempting to register the vs910.dll after moving it to the newly created Models folder within C:\LG Electronics\LGNPST\ directory, I get the following error:
"The module vs910.dll was loaded but the call to DllRegisterServer failed with error code 0x80020009."
Can someone help?
Click to expand...
Click to collapse
Solution....
1. If you can not register this DLL, Go to safe mode on Windows 7 and register VS910.DLL.
IT works For me. 100%
I don't know if this has been asked yet I didn't see anything... I want to root my phone, but I really don't know where to start or anything, just need some help getting to the right direction. Thanks in advance!
Sent from my C6902
http://forum.xda-developers.com/showthread.php?t=2787895
Try this link above supposed to be ultra easy
Sent from my C6903 using Tapatalk
I used this http://forum.xda-developers.com/showthread.php?t=2784900
I just downloaded EasyRootTool v5 that's attached, extracted and put it in folder in desktop, then i completedly removed my phones av, allowed unknown sources and ticked usb debugging from developer options.
Make sure you have PC Companion installed because it contains adb drivers.
Then connect it to pc, you see notification telling you that its connected in usb debugging mode. Pc it automatically installs everything you need and it should say its up and running and Pc Companion sees it.
Then i just opened the easyroot folder i just downloaded in desktop and run install.bat in it, don't run as administrator, it didn't work for me.
It starts a command prompt, do never close it, it closes itself when done. It should do all by itself.
When it says, go to apps and open towelroot app that was installed and simply open and press make it rain.
Then you need to press any keyboard button when your phone starts rebooting and you're done.
Command prompt says finished and now rooted, but you should see if there is any problems upper even tho it says finished, if you see something like "no access" or "could not mount" or anything negative, just try again it took me couple times.
Also if your pc's av blocks the app, just disable it for minute to allow it to run.
Go to play store and download SuperSU from Chainfire.
After all done you need to check root access... DONT trust those root checkers, go and download terminal emulator instead.
just type su in it and if it goes, you have root, if it says no access there is something wrong.
castilloj951 said:
I don't know if this has been asked yet I didn't see anything... I want to root my phone, but I really don't know where to start or anything, just need some help getting to the right direction. Thanks in advance!
Sent from my C6902
Click to expand...
Click to collapse
Because you did not see yet my signature...lol...
Ouya SuperScript
By TehCrucible
v0.1
INTRODUCTION
So I originally wrote this batch script to simplify and combine some of the most frequently used tweaks on the forums for my own sake, to speed up my tinkering with the Ouya but I've decided to clean it up and upload it in case anyone else wants to use it.
This script is designed as a "one-click" modification tool for a stock Ouya on the latest firmware. Please read this guide carefully.
I ACCEPT NO RESPONSIBILITY FOR ANY DAMAGE OR DATA LOSS. This script is built on the work of many others much smarter than myself and be sure to check the credits.
SO WHAT DOES IT DO?
In a nutshell:
- Install Clockworkmod Recovery
- Root Ouya
- Install Xposed Framework
- Install Google Play Store
WHAT DO I NEED?
- A Windows PC. I have included drivers for both x86 and x64.
- A Micro USB cable.
INSTALLATION OVERVIEW
1. Update your Ouya to latest stock firmware
2. Install ADB drivers
3. Run the script
4. Play some games!
There's a more detailed step-by-step in the included README.txt file.
KNOWN ISSUES
- None
CREDITS & THANKS
WonderEkin
mybook4
elmerohueso
fatesausage
DOWNLOAD
Here
Thanks a lot for this. A lo of people have been asking about an automated method to get the play store running on the OUYA...
Great works. I just think of root my ouya....
A quick update:
It's working. I'm on the latest firmaware which is JZO54L-OUYA, kernel version 3.1.10-g780994a. Completely stock, but I had already rooted my OUYA.
Anyway, I enabled the Wireless ADB which will instantly show you the ip and port, installed the drivers for 64bit. Then open CMD and type: adb connect "iport"
Then I ran the superscript and everything went fine.
Hope this helps. I didn't even have to connect with a wire.
But I guess if you wanna install the CWM recovery you should be connected with a wire...
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
zmelkoow said:
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
Click to expand...
Click to collapse
Did you install the drivers right? If yes, then you should open the folder where you extracted your files and right click while holding shift then choose open CMD here. Then write: adb devices
If your device is there, it will give you an output of the IMEI and name of device
From there, you can then tell us what the error is and hopefully we can resolve it...
zmelkoow said:
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
Click to expand...
Click to collapse
that happened to me yesterday, but I overcame it by have my computer plugged into the Ouya then reboot the ouya and as soon as the computer recognized it started the script and it worked.
but I have an issue too
So I can run the script everything works except getting the recovery installed. the command prompt acts like it successfully installed the recovery then the Ouya proceeds to reboot into recovery mode. When that happens I get this menu? Nothing happens when I push any buttons on my keyboard. This doesn't look like a custom recovery.
I have tried this many times, did a factory reset and started fresh however even after updating the device driver it doesnt recognize the ouya....
unkoil said:
So I can run the script everything works except getting the recovery installed. the command prompt acts like it successfully installed the recovery then the Ouya proceeds to reboot into recovery mode. When that happens I get this menu? Nothing happens when I push any buttons on my keyboard. This doesn't look like a custom recovery.
Click to expand...
Click to collapse
No it doesn't :angel:.
I think I had the recovery installed when I first got the device a long time ago and I used the manual method in this thread, but I'm not sure that it works any more. Also do you have a wired or wireless keyboard? By the way only the Bluetooth keyboard doesn't work. May be if you can install the recovery from that thread, then you can proceed to the next step. One last thing, I don't think you will need the recovery except if you want to install CM or something. Other than that, I never used it before.
TRMB said:
I have tried this many times, did a factory reset and started fresh however even after updating the device driver it doesn't recognize the ouya....
Click to expand...
Click to collapse
Which version of windows are you on? Is it Windows 8 or 8.1? Do you know how to disable driver signature verification?
Also, what does it say when you connect? Just nothing, or not recognized or what? You can try the adb wireless, go into settings/development on the ouya and activate it. Then open CMD from the extracted folder and type adb connect "ip : port" then check by typing "adb devices". Let us know what happens after that.
Which version of windows are you on? Is it Windows 8 or 8.1? Do you know how to disable driver signature verification?
Also, what does it say when you connect? Just nothing, or not recognized or what? You can try the adb wireless, go into settings/development on the ouya and activate it. Then open CMD from the extracted folder and type adb connect "ip : port" then check by typing "adb devices". Let us know what happens after that.[/QUOTE]
I have tried both from my windows 7 computer and 8.1 laptop. It showed up just as you said "missing driver", sent it to the drivers part of SS to get the driver, it said it installed but when i run the SS and hit option "1" it comes up blank...
ahmadshawki said:
No it doesn't :angel:.
I think I had the recovery installed when I first got the device a long time ago and I used the manual method in this thread, but I'm not sure that it works any more. Also do you have a wired or wireless keyboard? By the way only the Bluetooth keyboard doesn't work. May be if you can install the recovery from that thread, then you can proceed to the next step. One last thing, I don't think you will need the recovery except if you want to install CM or something. Other than that, I never used it before.
I am having the same issue but not only with this method, I have also tried to install CWM with oneclicks auto and manual method to no avail.....
any suggestions?
Click to expand...
Click to collapse
always says it installed but will only boot into stock recovery
TRMB said:
always says it installed but will only boot into stock recovery
Click to expand...
Click to collapse
I can see from your posts that you tried everything and I'm so sorry that I'm just a user and not a developer or something. May be you can try sideloading terminal and try CWM manually (if you haven't already) or sideload ROM Toolbox and try the flash recovery option.
That's all I got. But if I were you, I won't bother about the CWM at all. It's useless.
As for the Play store, try the mod that I attached in my reply and let me know if this one works for you...
Unfortunately the link is not working. Is it possible to update it, please?
What I do if my micro usb is broken :/. I only have wireless adb
.. nice .. now my ouya will run again .. thanks
I already tried everything but I can't make this work... I installed every single drive in every single way.
The best screenshot of the whole situation is on attachment. SuperScript simply doesn't recognize OUYA with default drivers, neither provided drivers (or any of its variation like "composite adb" or something like that. The "List of devices attached" always return empty, even when provided drivers installed (signature deactivated and everything else). As readme says, when SuperScript doesn't recognize, it returns "error: device not found" every time that I try something...
This SuperScript seems great to start things on my my untouched and default OUYA... but I'm honestly out of options.
vinirockman said:
I already tried everything but I can't make this work... I installed every single drive in every single way.
The best screenshot of the whole situation is on attachment. SuperScript simply doesn't recognize OUYA with default drivers, neither provided drivers (or any of its variation like "composite adb" or something like that. The "List of devices attached" always return empty, even when provided drivers installed (signature deactivated and everything else). As readme says, when SuperScript doesn't recognize, it returns "error: device not found" every time that I try something...
This SuperScript seems great to start things on my my untouched and default OUYA... but I'm honestly out of options.
Click to expand...
Click to collapse
Problem solved. It is Windows Drivers issue. S-Config did a great job explaining how you should do this HERE. I hope it helps people who got stuck. SuperScript did work, I did installed CWM but I was not able to navigate (neither thru bluetooth usb full keyboard). I'm going to try to figure out what I'm missing later. As I can see, S-Config's website is fully updated... I do highly recommend read there who is going to do anything with ouya.
vinirockman said:
Problem solved. It is Windows Drivers issue. S-Config did a great job explaining how you should do this HERE. I hope it helps people who got stuck. SuperScript did work, I did installed CWM but I was not able to navigate (neither thru bluetooth usb full keyboard). I'm going to try to figure out what I'm missing later. As I can see, S-Config's website is fully updated... I do highly recommend read there who is going to do anything with ouya.
Click to expand...
Click to collapse
.. CWM need wired usb keyboard no navigate .. i don't remember if it can do it via bluetooth