Database Develop

[KERNEL][GB][I9100G][01-05-2012]superatmos kernel v3.3.. **THE LAST ONE**

Hi all,
UPDATE: There will not be any more updates for this Kernel.
I present you all .. superatmos kernel.
To verify the version of the superatmos kernel, check in CWM app. (From v3.3)
How to flash:
UNTIL v3.2
Download the attachment.
Flash using Odin.
v3.3 and ABOVE:
Copy the zip to sdcard.
Flash it through CWM recovery.
Credits:
To everyone who has inspired, motivated and encouraged me to work and support the android community. I got a lot of help from xda developers, friends, tutorials and a lot more. I give the credit to everyone who directly or indirectly helped me in creating this kernel. Special thanks to Chainfire and Chenglu.
Disclaimer:
Please be aware that you are flashing at your own risk. I don't bear any responsibility for damage to your phone because of you using this kernel.
Download Link:
v3.3 http://www.mediafire.com/?hhjfgtngqh2fw77
v3.2 http://www.mediafire.com/?al2j5afjd6n72fc
v3.1 http://www.mediafire.com/?o6r63h50cdk5equ
XXLA1 http://www.mediafire.com/?t71stp4taq1pyy5
JPKK1 http://www.mediafire.com/?ibic4cftc34a1h4
DZKL3 http://www.mediafire.com/?8qsfv84xpc8gf1h
Check out the mirrors for old releases at this post: http://forum.xda-developers.com/showpost.php?p=22421729&postcount=150
Sources: https://github.com/superatmos

superatmos kernel features
Now supports external sdcards with NTFS partition (NEED FEEDBACK)
Added few memory and misc tweaks
Works on All Gingerbread ROMs for I9100G
CWM Touch Recovery 5.8.1.5 (v3.3 and v3.2) (Thanks and Credits to koush)
Clockwokmod Recovery 5.0.2.8 (v3.1)
Based on XXLA1 (Best kernel until now for I9100G in my opinion)
Close to stock.
Capped to 1200MHz
Completely CF-root compatible(CWMManager.apk auto install) (Credits and THANKS TO Chainfire.)
Added CIFS module
Custom bootanimation(copy bootanimation.zip to "/sdcard/superatmos" folder and reboot) and Custom bootsound(copy "PowerOn.wav" to /sdcard/superatmos folder and reboot). (superatmos folder can be seen now in /sdcard once you flash the kernel)
Vibration works.
init.d script support (put your boot scripts in /system/etc/init.d or /data/etc/init.d folder)
Additional modules support (copy your .ko files to /system/lib/modules or /data/lib/modules and reboot)
Custom boot scripts support (copy your custom boot scripts to /data/customboot.sh and reboot)
VERY STABLE

why don't you compile the latest official firmware 2.3.6 I9100GDZKJ2 ?

Good job. Finally we are seeing more I9100G stuff.

thehackersz said:
why don't you compile the latest official firmware 2.3.6 I9100GDZKJ2 ?
Click to expand...
Click to collapse
This kernel is from samsung opensource. Its version too is 2.6.35.7. Its compatible with DZKJ2.

I am a complete n00b. So I have no idea about flashin, roms, kernels etc. I have an Indian I9100G. Its baseband version is 2.3.4 I9100GDDKH3, build number is GINGERBREAD.XWKH8 and kernel is 2.6.35.7 [email protected] #2.
Which ROM/official firmware can I install? What is this DZKJ2 ?

ambar_hitman said:
I am a complete n00b. So I have no idea about flashin, roms, kernels etc. I have an Indian I9100G. Its baseband version is 2.3.4 I9100GDDKH3, build number is GINGERBREAD.XWKH8 and kernel is 2.6.35.7 [email protected] #2.
Which ROM/official firmware can I install? What is this DZKJ2 ?
Click to expand...
Click to collapse
I9100GDZKJ2 is a latest firmware from Samsung for my Country. try insall KIES from Samsung website. You should see if your phone need to be upgrade to latest firmware or not. It's auto update...
refer HERE for rooting you I9100G
---------- Post added at 02:18 PM ---------- Previous post was at 02:11 PM ----------
visit http://fus.nanzen.se to check you country latest firmware for I9100G
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
superatmos said:
This kernel is from samsung opensource. Its version too is 2.6.35.7. Its compatible with DZKJ2.
Click to expand...
Click to collapse
can you confirm there is no 1008mhz capping in this kernel?

try insall KIES from Samsung website. You should see if your phone need to be upgrade to latest firmware or not. It's auto update...
Click to expand...
Click to collapse
I installed KIES. It says its latest firmware available. Maybe its the latest in India. Should I install I9100GDZKJ2? Will it cause any problem? I only need Indian CSC, right?

just upgrade your latest firmware using KIES. You should be alright

superatmos said:
This kernel is from samsung opensource. Its version too is 2.6.35.7. Its compatible with DZKJ2.
Click to expand...
Click to collapse
Anyway thanks for your hardwork.

thehackersz said:
just upgrade your latest firmware using KIES. You should be alright
Click to expand...
Click to collapse
KIES says its latest update. Maybe thats the latest for my country. If I install for some other country, will there be any problem?

http://fus.nanzen.se
Last modified:
2011-10-24
Latest firmware:
I9100GDZKJ2/I9100GOLCKJ2/I9100GDZKJ2/I9100GDZKJ2
China
Product Code: GT-I9100RWGCHN
HIDSWVER: I9100GZCKH4/I9100GOZHKH4/I9100GZCKH4/I9100GZCKH4
Egypt
Product Code: GT-I9100LKGEGY
HIDSWVER: I9100GJPKH8/I9100GOJPKG7/I9100GDZKH5/I9100GJPKH8
Iran
Product Code: GT-I9100LKGTHR
HIDSWVER: I9100GJPKH8/I9100GOJPKG7/I9100GDZKH5/I9100GJPKH8
Malaysia
Product Code: GT-I9100LKGXME
HIDSWVER: I9100GDZKI1/I9100GOLCKI1/I9100GDZKI1/I9100GDZKI1
Morocco (MAT)
Product Code: GT-I9100LKGMAT
HIDSWVER: I9100GJPKH8/I9100GOJPKG7/I9100GDZKH5/I9100GJPKH8
Morocco (MED)
Product Code: GT-I9100LKGMED
HIDSWVER: I9100GJPKH8/I9100GOJPKG7/I9100GDZKH5/I9100GJPKH8
Pakistan (PAK)
Product Code: GT-I9100LKGPAK
HIDSWVER: I9100GJPKH8/I9100GOJPKG7/I9100GDZKH5/I9100GJPKH8
Saudi Arabia (JED)
Product Code: GT-I9100LKGJED
HIDSWVER: I9100GJPKH8/I9100GOJPKG7/I9100GDZKH5/I9100GJPKH8
Tunisia
Product Code: GT-I9100LKGTUN
HIDSWVER: I9100GJPKH8/I9100GOJPKG7/I9100GDZKH5/I9100GJPKH8
United Arab Emirates
Product Code: GT-I9100LKGMID
HIDSWVER: I9100GJPKH8/I9100GOJPKG7/I9100GDZKH5/I9100GJPKH8
---------- Post added at 04:31 PM ---------- Previous post was at 04:28 PM ----------
ambar_hitman said:
KIES says its latest update. Maybe thats the latest for my country. If I install for some other country, will there be any problem?
Click to expand...
Click to collapse
sorry Ambar, India cannot be found.
You still can try to flash it, but before that make sure you backup the original rom first.

You still can try to flash it, but before that make sure you backup the original rom first
Click to expand...
Click to collapse
Can you guide me how to take backup without rooting? Or give a link explaining it?

ambar_hitman said:
Can you guide me how to take backup without rooting? Or give a link explaining it?
Click to expand...
Click to collapse
i don't know if any other way around you can do a complete backup without rooted phone.
http://forum.lowyat.net/topic/2068824/all

thehackersz said:
I9100GDZKJ2 is a latest firmware from Samsung for my Country. try insall KIES from Samsung website. You should see if your phone need to be upgrade to latest firmware or not. It's auto update...
refer HERE for rooting you I9100G
---------- Post added at 02:18 PM ---------- Previous post was at 02:11 PM ----------
visit http://fus.nanzen.se to check you country latest firmware for I9100G
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
can you confirm there is no 1008mhz capping in this kernel?
Click to expand...
Click to collapse
No. It is not capped at 1008MHz. Please use SetCPU to set the frequencies accordingly. However, the frequency range this kernel supports is 300MHz ~ 1200MHz.
You can get SetCPU from THIS thread. Please buy it from Android Market if you wish to donate to the developer.

superatmos said:
No. It is not capped at 1008MHz. Please use SetCPU to set the frequencies accordingly. However, the frequency range this kernel supports is 300MHz ~ 1200MHz.
You can get SetCPU from THIS thread. Please buy it from Android Market if you wish to donate to the developer.
Click to expand...
Click to collapse
in set SetCPU or No-frills CPU Control you can see range of 300mhz-1200mhz. The problem is when you do the cpu benchmarking it still shown 1008mhz.

thehackersz said:
in set SetCPU or No-frills CPU Control you can see range of 300mhz-1200mhz. The problem is when you do the cpu benchmarking it still shown 1008mhz.
Click to expand...
Click to collapse
indeed..but sometimes it shown 1200mhz. not stick with 1200mhz only. frustating!

thehackersz said:
in set SetCPU or No-frills CPU Control you can see range of 300mhz-1200mhz. The problem is when you do the cpu benchmarking it still shown 1008mhz.
Click to expand...
Click to collapse
I didn't modify my kernel yet for overclocking. I will be doing that and update the kernel along with few other tweaks.
But for benchmarking, just set both minimum and maximum to 1200MHz in SetCPU and check.

superatmos said:
I didn't modify my kernel yet for overclocking. I will be doing that and update the kernel along with few other tweaks.
But for benchmarking, just set both minimum and maximum to 1200MHz in SetCPU and check.
Click to expand...
Click to collapse
great! OC kernel + tweak. thats a great news ive heard for "Gangsta" famly

thehackersz said:
just upgrade your latest firmware using KIES. You should be alright
Click to expand...
Click to collapse
I want this like yours
Model number: GT-I9100G
Android version: 2.3.6
Baseband version: I9100GDZKJ2
Kernel version: 2.6.35.7 [email protected] #2
Build number: GINGERBREAD.DZKJ2
Give me link, please !

Very confused..please help..

Hi Folks,
I'm coming from the S2 side of the house and I've been reading for 3 days now and I'm very confuse with how to root my N-7000 note with all the talking about "possibility" of turning it into a nice paper weight. All I wish to do is add some of my needed root apps and stay close to stock as I can but with full cwm. I was running Miui on my S2. So if someone could point me in the right direction I would greatly appreciate it. Not afraid to flash if necessary .
Phone info;
Model-GT-N7000
Android Ver- 4.0.3
Baseband Ver- N7000XXLPT
Kernel- Stock -3.0.15-N7000JPLPD-CL643396 [email protected] #3 SMP PREEMPT Thu May31
Build Number- IML74.JPLPD
Country- UAE
Thank you for your time..

lilbrat said:
Hi Folks,
I'm coming from the S2 side of the house and I've been reading for 3 days now and I'm very confuse with how to root my N-7000 note with all the talking about "possibility" of turning it into a nice paper weight. All I wish to do is add some of my needed root apps and stay close to stock as I can but with full cwm. I was running Miui on my S2. So if someone could point me in the right direction I would greatly appreciate it. Not afraid to flash if necessary .
Phone info;
Model-GT-N7000
Android Ver- 4.0.3
Baseband Ver- N7000XXLPT
Kernel- Stock -3.0.15-N7000JPLPD-CL643396 [email protected] #3 SMP PREEMPT Thu May31
Build Number- IML74.JPLPD
Country- UAE
Thank you for your time..
Click to expand...
Click to collapse
Did you try this thread? And this?
---------- Post added at 04:12 AM ---------- Previous post was at 04:05 AM ----------
Follow the instructions in this post and you will find that you will be rooted.

Read both and a few more... but still confused no whether I need to back to GB or just do this..
Download the [CWM zip] and put in your Ext SDCARD ] And [ SUPERSU-Busybox-Installer.zip] to SD card (internal memory)
Reboot to recovery.
Choose apply update from external storage. (use vol up/down to select, power to enter)
Choose CWM.zip and wait until CWM recovery appear.
Choose install zip from sdcard (Now use touch function to select choice)
Choose and Install SUPERSU-Busybox-Installer.zip
Reboot
You are done and now your device is Rooted
and add cwm apk ..or do I also need to flash a cwm kernel also..

Go straight for it,no need for GB nor flashing CWM,it is a temp CWM download it from the same post, rooting iCS is so easy just read dr.ketan post and go..
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗

In a clear words, just do exactly as the steps u wrote in ur post nothing more nothing less ..
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗

[Q] How can you say if your using a unsafe ROM?

Hello i just got curious about my phone if i have been using a wrong ROM because i just some forum talking about the "CMW.zip" I use that application for rooting my phone , in short using "CMW.zip" means ur using a unsafe rom? hmm help please im just a newbie ....
and here is my kernel version : 3.0.15- 1068447 _ [email protected] #3 _ SMP PREEMPT thu sep 6 21:49:19 KST 2012

you are in ics and stock kernel. it's the kernel that's unsafe for wipes and the cwm. zip file you talking about has a tendency to brick ics devices. so don't use it anymore. I guess you are rooted, so the best option is to install a safe kernel like philz or hydracore using Mobile Odin and be safe

pedropenduko said:
Hello i just got curious about my phone if i have been using a wrong ROM because i just some forum talking about the "CMW.zip" I use that application for rooting my phone , in short using "CMW.zip" means ur using a unsafe rom? hmm help please im just a newbie ....
and here is my kernel version : 3.0.15- 1068447 _ [email protected] #3 _ SMP PREEMPT thu sep 6 21:49:19 KST 2012
Click to expand...
Click to collapse
ok i got my answer in this question i just read this forum "http://forum.xda-developers.com/showthread.php?t=1827394"
but i got still question is there a proper way to unroot my phone that rooted by the "CMW.zip" ???

if its rooted, there is no problem. Just move to a safe kernel. no need to unroot it again. Just don't use that file to root again. 2nd time mite not be lucky

nokiamodeln91 said:
you are in ics and stock kernel. it's the kernel that's unsafe for wipes and the cwm. zip file you talking about has a tendency to brick ics devices. so don't use it anymore. I guess you are rooted, so the best option is to install a safe kernel like philz or hydracore using Mobile Odin and be safe
Click to expand...
Click to collapse
hello sir, yes sir my phone is rooted do I need to uninstall CMW and unroot my phone? or ill just install the kernel that you say?
thanks!!!!

no need to do anything. Just download the philz kernel and install it using Mobile Odin. you are safe. and if you rooted using cwm.zip you will not have cwm recovery

nokiamodeln91 said:
if its rooted, there is no problem. Just move to a safe kernel. no need to unroot it again. Just don't use that file to root again. 2nd time mite not be lucky
Click to expand...
Click to collapse
uhm unfortunately i root my phone about 3 times?(using that method) because i am a newbie and trial and "erroring" is there a way to check if my phone is still in a good condition...

if its working fine. It should be ok. for more test you can download emmc check from the playstore and run a scan. If it passed, all ok

nokiamodeln91 said:
if its working fine. It should be ok. for more test you can download emmc check from the playstore and run a scan. If it passed, all ok
Click to expand...
Click to collapse
ohh thank your very much sir you help me a lot i owe you one!!!:angel:

cheers mate

nokiamodeln91 said:
cheers mate
Click to expand...
Click to collapse
dude, i passed the test i will proceed to the kernel you said,, btw i am just curious again is this kernel will boost my phone to play games smoothly ??
thank you very much

no its a stock kernel and you will have the stock feeling. If you want performance tweaks, try hydracore or notecore.

nokiamodeln91 said:
no its a stock kernel and you will have the stock feeling. If you want performance tweaks, try hydracore or notecore.
Click to expand...
Click to collapse
what is this stock feeling?
so it means that one I need to install is hydracore or notecore for the smooth gaming?

stock feeling means as the phone is on official software. philz is a samsung kernel with added recovery options and safe.
hydracore has a lot of tweaks m. you can try hydracore and check if it suits you. If not the you can revert back to philz same way.
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
by the way most of the games run smooth on note anyways

nokiamodeln91 said:
stock feeling means as the phone is on official software. philz is a samsung kernel with added recovery options and safe.
hydracore has a lot of tweaks m. you can try hydracore and check if it suits you. If not the you can revert back to philz same way.
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
by the way most of the games run smooth on note anyways
Click to expand...
Click to collapse
ahhhh okay thanks again i think ill use hydracore cuz the name is cool haha thanks again!!!!!!!!!!!!!!!

pedropenduko said:
i think ill use hydracore cuz the name is cool haha
Click to expand...
Click to collapse
:thumbup:

nokiamodeln91 said:
:thumbup:
Click to expand...
Click to collapse
uhm sir, sorry for disturbing you but could you answer this.. can i use CMW to flash the corehydra???

yes you can. use the zip file

Hello again sir/s
i have a question it is safer to install Clockworkmod from the market and then flash ??
or it is just the same with the CMW.zip file?
(should I post it with another thread?)

never use the CWM.zip file. Just install a safe kernel and it will have CWM recovery inbuilt. i dont have much faith in the market one either
now on the other side. your signature shows you are running hydracore kernel.. why are you asking for CWM.zip again? its inbuilt in this kernel.

[Q] Going back to GB stock from rooted ICS Open Germany 4.0.3

Hello everyone, i've been searching and have found some information but i'm a bit worried with all the unsafe kernels talk so please bear with me if i ask something obvious or that has been asked before.
I flashed my phone to the Open Germany stock ICS release a few months back and then rooted it, but now i want to flash a JB rom and i see you have to go back to GB first.
What im using right now:
Android version: 4.03
Baseband version: N7000XXLPT
Kernel Version:
3.0.15-N7000XXLPY-CL474507
[email protected] #3
SMP PREEMPT Fri May 4 04:49:06 KST 2012
Build number: IML74K.XXLPY
But im still a bit confused.
Anything in particular i need to watch out for or do i just flash stock GB using PC Oding to the note?
To what version of GB should i downgrade?
Thanks in advance.

Its not required to flash gb rom to get jb
You need to be on safe kernel to flash jb rom
So now you are on ics,then flash a safe kernel like philz or hydracore and then you can flash jb rom
---------- Post added at 12:15 AM ---------- Previous post was at 12:11 AM ----------
http://forum.xda-developers.com/showthread.php?t=1901191
Search for lpy kernel here
Download and flash it
And then you can flash jb rom

[email protected]$3K#@R said:
Its not required to flash gb rom to get jb
You need to be on safe kernel to flash jb rom
So now you are on ics,then flash a safe kernel like philz or hydracore and then you can flash jb rom
---------- Post added at 12:15 AM ---------- Previous post was at 12:11 AM ----------
http://forum.xda-developers.com/showthread.php?t=1901191
Search for lpy kernel here
Download and flash it
And then you can flash jb rom
Click to expand...
Click to collapse
Thank you very much!
I went ahead and flashed the PhilZ-cwm6-XXLPY-XEN-v2.7.zip file, now i have the very pretty CWM recovery but my kernel info in Settings / About Phone is the same as my first post. Is that normal?

Apoc2k said:
Thank you very much!
I went ahead and flashed the PhilZ-cwm6-XXLPY-XEN-v2.7.zip file, now i have the very pretty CWM recovery but my kernel info in Settings / About Phone is the same as my first post. Is that normal?
Click to expand...
Click to collapse
Yes its normal because philz is a stock kernel with emmc bug disabled
You can now flash the jb rom through cwm

[Q] Newbie question about Kernels and ROMs

Still foggy about Kernels and ROMs.
I recently installed 3.0.36_HydraCore_v5.34 kernel on my GT-N700 which was already running ICS 4.0.4 Baseband version N7000XXLS1 and it seems very stable.
However, I wanted to try the Speedmod JB ROM from Cursed4Eva and saw that it required installing a supplied kernel first. I assumed this is because the kernel and ROM have been developed together for compatibility. (Not sure if I assume correctly or if I'm using the correct terminology).
It all worked fine until I tried to re-install the HydraCore kernel after which the phone wouldn't boot. (I recovered easily using a Nandroid backup with ROM Manager).
My question is, is it always the best practice to install the recommended kernel (if any) when flashing a new ROM and not to try re-installing say, the Hydracore afterwards? The HydraCore claims to be compatible with any ROM but either it isn't compatible with the JB ROM or I'd doing something wrong (more likely).
Any advice would be most appreciated.
Trevor

I don't know what is a speedmod jb rom.
but if it's based on the latest samsung stock touchwiz jellybean rom, the hydracore is not compatible with it. current safe kernel is only philz xxls2/xxls7. If the phone is not booting the boot into recovery and flash the rom again
---------- Post added at 06:54 PM ---------- Previous post was at 06:53 PM ----------
hydracore is compatible with most of the roms except the Samsung JB touchwiz as the kernel sources are not released as of yet. Once it does, dev will make it compatible for it too

Thank you. That makes sense. I still have a lot to learn.
Trevor
PS I would have hit thnks but can't see the button on my screen.
nokiamodeln91 said:
I don't know what is a speedmod jb rom.
but if it's based on the latest samsung stock touchwiz jellybean rom, the hydracore is not compatible with it. current safe kernel is only philz xxls2/xxls7. If the phone is not booting the boot into recovery and flash the rom again
---------- Post added at 06:54 PM ---------- Previous post was at 06:53 PM ----------
hydracore is compatible with most of the roms except the Samsung JB touchwiz as the kernel sources are not released as of yet. Once it does, dev will make it compatible for it too
Click to expand...
Click to collapse