Database Develop

Droid 4 Utility for Windows/Mac/Linux

Hey all! This is the new home of the Droid 4 Utility (NOW WITH SAFESTRAP THANKS TO HASHCODE) for Windows/Mac/Linux!
There are (still) no fastboot files as of writing this (2/28/2012) so use Safestrap at your own risk
Once they come out I will be making a full version that includes fastboot restore. For now, the utility is only a few MB compared to a GB+.
From this point forward I will be taking charge of updating the Droid 4 Utility for Windows/Mac/Linux
This way mattlgroff has a little less work on his hands and can focus more on IMPORTANT things like bootloaders, ICS, etc...
MAC/LINUX: Be sure to read the instructions below (or README file) if you are not familiar with using terminal as root or executing bash scripts!
-Changes
~~as of 2/18/ 11:30PM PST
Fixed bug where Superuser.apk was pushed to /data instead of /system/app/
Fixed unroot script to properly remove Superuser.apk
~~as of 2/19 4:30 PM PST
Fixed chmod in root method from 4775 to 6775
~~as of 2/28 6:15PM PST
Added Safestrap recovery!!
~~as of 3/2
fixed script to chmod +x ./files -R so that you can actually run the files on mac and linux (that would be important huh?)
DOWNLOADS
WINDOWS
Size: 7.75 MB
MD5: f82bf8d8a085ff95b696712b8caa0f1b
Link: http://tinyw.in/KKB8
MAC
Size: 7.19 MB
MD5: dc8468d051d59963914a0b8a054b83b8
Link: http://tinyw.in/vx2A
LINUX
Size: 7.26 MB
MD5: 0c082efbff48e614b9d8ebffc7eca3eb
Link: http://tinyw.in/tpt0
Here's how:
Windows:
Simply Unzip the files, and run Droid4Windows.bat as administrator (right click>run as administrator)
Mac/Linux:
Simply extract the zip then
Code:
su
Then enter the root password NOTE: This is not YOUR password, this is the ROOT password. If you dont know it, you can always use
Code:
sudo passwd
to reset the root password
Next run:
Code:
cd /the path to where you extracted the files/
for example, heres what I have to type:
Code:
cd /home/skylar/Desktop/Droid4UtilityLinux/
next run the appropriate bash script:
Code:
bash Droid4linux
OR
Code:
bash Droid4mac
I'm sorry to say I don't actually own a Droid 4, so I'm doing this blind. Please report any problems or bugs you have.
Have fun and I hope you enjoy! [/SIZE]
CLICK HERE TO DONATE
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CLICK HERE TO DONATE

I can not get this to unroot.
---------------------------------------------------------------
Easy rooting toolkit (v1.0)
UNROOTING SCRIPT
created by DooMLoRD
based heavily on FlashTool scripts (by Bin4ry and Androxyde)
Credits go to all those involved in making this possible!
---------------------------------------------------------------
MAKE SURE THAT THE SCREEN IS UNLOCKED
and if you get Superuser prompts ACCEPT/ALLOW THEM
ELSE THIS WILL NOT WORK
Note: This removes superuser from both possible locations
So seeing one error of now finding Superuser is NORMAL!
---------------------------------------------------------------
Press any key to continue . . .
--- STARTING ----
--- WAITING FOR DEVICE
The system cannot find the path specified.
--- TESTING FOR SU PERMISSIONS
MAKE SURE THAT THE SCREEN IS UNLOCKED
and if you get Superuser prompts ACCEPT/ALLOW THEM
ELSE THIS WILL NOT WORK
The system cannot find the path specified.
--- cleaning
The system cannot find the path specified.
--- pushing busybox
The system cannot find the path specified.
--- correcting permissions
The system cannot find the path specified.
--- remounting /system
MAKE SURE THAT THE SCREEN IS UNLOCKED
and if you get Superuser prompts ACCEPT/ALLOW THEM
ELSE THIS WILL NOT WORK
The system cannot find the path specified.
--- pushing unroot script
The system cannot find the path specified.
--- correcting permissions
The system cannot find the path specified.
--- executing unroot
MAKE SURE THAT THE SCREEN IS UNLOCKED
and if you get Superuser prompts ACCEPT/ALLOW THEM
ELSE THIS WILL NOT WORK
The system cannot find the path specified.
--- cleaning
The system cannot find the path specified.
--- rebooting
The system cannot find the path specified.
ALL DONE
Press any key to continue . . .
The system cannot find the path specified.
Please make a selection or hit ENTER to return:
Click to expand...
Click to collapse

prodigyweb said:
I can not get this to unroot.
Click to expand...
Click to collapse
Sounds like you aren't running this inside the folder that also contains the /files/ folder. If you have it by itself of course the path's won't find it...because you moved it or you aren't "cd" into the directory of the utility.

appears after a phone/computer reboot and canceling the ADB process in my tasks it now is rebooting the phone and working. Thanks!

prodigyweb said:
My setup is: http://i.imgur.com/Surbz.png
should it be within the adb package from android itself?
Click to expand...
Click to collapse
Is your USB Debugging Mode enabled and "Unknown Sources" in your application settings?

Hm, I turned on USB Debugging in the settings, but it's not starting up when I plug in a USB cable, and adb can't find the device. ???

highlandsun said:
Hm, I turned on USB Debugging in the settings, but it's not starting up when I plug in a USB cable, and adb can't find the device. ???
Click to expand...
Click to collapse
While your phone is plugged in, see what drivers are in device manager and remove them. Then restart your phone while its still connected through USB. See if that reinstalls all the necessary drivers and try again.

reigndropz said:
While your phone is plugged in, see what drivers are in device manager and remove them. Then restart your phone while its still connected through USB. See if that reinstalls all the necessary drivers and try again.
Click to expand...
Click to collapse
This is Linux, so no device manager. I think I needed to add the Motorola vendorID to my udev rules first, I got it working eventually. Rooted, great. Now to go and fix the character maps so I can fully use Connectbot.

highlandsun said:
This is Linux, so no device manager. I think I needed to add the Motorola vendorID to my udev rules first, I got it working eventually. Rooted, great. Now to go and fix the character maps so I can fully use Connectbot.
Click to expand...
Click to collapse
Ah ok.....how are you with deodexing? I have been trying to deodex the SystemUI but I am not having any success. I add the jars but it keeps going and going and doesnt seem to end. Soon as I get the SystemUI deodexed, I'll throw a battery percent icon here....

reigndropz said:
Ah ok.....how are you with deodexing? I have been trying to deodex the SystemUI but I am not having any success. I add the jars but it keeps going and going and doesnt seem to end. Soon as I get the SystemUI deodexed, I'll throw a battery percent icon here....
Click to expand...
Click to collapse
Hm, haven't done anything with theming tweaks. Dunno, sorry.
You need adb to be enabled at boot time, so you can adb logcat during the startup and see what failed.
By the way, the Linux archive is not immediately usable, you need to chmod +x everything under the files/ subdirectory to make them executable first.

highlandsun said:
Hm, haven't done anything with theming tweaks. Dunno, sorry.
You need adb to be enabled at boot time, so you can adb logcat during the startup and see what failed.
By the way, the Linux archive is not immediately usable, you need to chmod +x everything under the files/ subdirectory to make them executable first.
Click to expand...
Click to collapse
Hey thanks for pointing that out! I didnt notice because they were already executable on my computer. I added
Code:
chmod +x ./files -R
to the script on startup so no one should have to manually do it anymore, sorry about that

prodigyweb said:
I can not get this to unroot.
Click to expand...
Click to collapse
Make sure you have done all of the steps below
Prework
1. Plug in phone to computer.
2. Turn on USB Debugging. Menu -> Settings -> Application -> Development -> USB Debugging
3. Confirm latest Moto driver is installed. Go to Device Manager on Windows while the D4 is plugged into it and confirm you see ADB Interface listed with Mot Composite ADB Interface listed in the group. If you see that, skip #4 & #5. There are other ways to go about this, but this is the simplest and surefire way to confirm the driver is there and compatible.
4. Go get Moto driver and install it: USB and PC Charging Drivers - Motorola Mobility, Inc. USA It is an exe file that must be run and your computer has to restart when completed.
5. Go back into your Device Manager after reboot with the phone plugged in and confirm ADB Interface is there and no error exists.
Done.

I can't get this to root, it appeared to have rooted once since Superuser was installed but TBU said not root access. Now I get message " error more than one device and emulator" when I try to root again or unroot. any idea?

contemplating getting this through a client, any word on fastboot and unlocked updates?
or is the droid 4 destined to be like all other moto phones and lack a soul...
I really wanted the Photon, but dev on it was strangled to death!

Hammerfest said:
contemplating getting this through a client, any word on fastboot and unlocked updates?
or is the droid 4 destined to be like all other moto phones and lack a soul...
I really wanted the Photon, but dev on it was strangled to death!
Click to expand...
Click to collapse
The phone itself is great. Good build quality, fantastic keyboard, fast, etc. I have not heard any news on fastboot files yet. I assume it's just a matter of time but who really knows for sure. Unlock updates? As in unlock the bootloader? I don't ever expect to see that happen, personally.
Despite that, development seems to be coming along nicely with very usable AOSP CM9, AOKP, and Gummy ROMs. The relative ease with which Razr ROMs can be ported to the D4 (due to almost identical internal components) should help on that front as well as Razr development is seems very strong.

Does this Utility still work after the latest update?
I had previously rooted via this utility and had frozen a bit of bloatware w/ TB. I have since unfrozen the bloatware and unrooted. As soon as the install message pops up again I plan to run the update, but was wondering if I will be able to re-root the same way once I do that.

mancowmilitia said:
Does this Utility still work after the latest update?
I had previously rooted via this utility and had frozen a bit of bloatware w/ TB. I have since unfrozen the bloatware and unrooted. As soon as the install message pops up again I plan to run the update, but was wondering if I will be able to re-root the same way once I do that.
Click to expand...
Click to collapse
I've heard people having mixed results trying to re-root using the utility. Some seem to have no problem but others said they had to run the exploit directly. Not sure why.
I just used the Voodoo OTA Root Keeper app to hide root while the update was being applied and then restored root.

kwyrt said:
I've heard people having mixed results trying to re-root using the utility. Some seem to have no problem but others said they had to run the exploit directly. Not sure why.
I just used the Voodoo OTA Root Keeper app to hide root while the update was being applied and then restored root.
Click to expand...
Click to collapse
I installed the upgrade with no issues. I was able to re-root without complication as well. The only message I received was that the Superuser.apk installation "failed" because it was already there. Others have noted that unrooting doesn't delete the file. But, its presence did not stop my upgrade.
This time I installed Voodoo and will go that route for the next OTA.

Is there a mirror link for the Windows Utility? The download keeps timing out on me.

heres a link for an older copy
http://goo.im/apps/mattlgroff/Droid4Utility0.3.zip

SoupKit (again)...When you're fed up with trying to get ADB to connect in Windows.

The SoupKit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is SoupKit? At it's heart, SoupKit is for those who are tired of messing around with Windows and are ready to do try something that works. It was created to be "sort of" modular in that after the ADB installer has been installed, other Linux scripts can be installed and run from the command line by just typing the name of the script and without worrying about changing directories or dealing with permissions. It's intended to make the transition from Windows to Linux for Android a little bit easier.
How does it work?
The SoupKit ADB Installer --- FOR ALL KINDLE FIRES
This puts everything where it needs to be, installs any necessary dependencies, installs drivers, configures Linux to run adb and fastboot commands, puts the SoupKit in your $PATH and cleans up after itself, all while taking a fraction of the space needed for the Android SDK. What this means for you is, you will be able open any terminal window and start entering adb or fastboot commands immediately. There's no need to change directories, add sudo commands or certain operators that are confusing to command line newbies ( ./ ). You can enter commands just as you see them in tutorials. No more worrying about “ADB Offline”, “Status Unknown” or “List of devices attached ????????????????”. This alone can make a huge difference for anyone having Kindle Fire problems that can't be fixed in Windows or those who are overwhelmed by the technicalities of configuring Linux for Android.
What you need:
First, you need Linux. Don't worry, it's not as bad as you may think.
Luckily, all Linux distros are free to download and install on your computer. It can also be booted from a USB flash drive so you don't have to wipe out your current OS (although you probably should anyway). You can use a VM, but the only VM that I've found that can detect the Kindle Fire in fastboot mode is Parallels. Vmware won't cut it, and VirtualBox sure as hell won't cut it so don't waste your time with them if you ever need to do anything in fastboot (if you're bricked, you need fastboot).
Probably the best method to get Linux running for a new user is by setting up a Linux LiveUSB.
I'm not going to teach you how to set up a Linux LiveUSB, but there are plenty of FREE programs out there that will not only create a Linux LiveUSB for you, but will download your choice of distro as well, and all you need is a USB flash drive (preferably 8GB or larger). A Google search of “Linux LiveUSB” will offer plenty of choices, although, PendriveLinux seems to be a favorite among most. Just be sure to add plenty of “persistence” (1 or more gigabytes) or you will lose everything every time you reboot. And the better quality of flash drive you can use, the better it will be in the long run. Some flash drives just don't do well and can cause some file system corruption over time (not something you want to be dealing with while you're having Kindle Fire problems).
You'll also have to figure out how to boot your computer from a USB. Check your computer's BIOS manufacturer website for instructions on how to do this.
If you're using a LiveUSB, there is no root/sudo password, just hit enter.
Do not use a USB 3.0 port
Once you have Linux installed and booted, you need to make sure your Internet is working. It may take some configuration on your part but it is necessary for the SoupKit to install properly. Luckily, once you have an Internet connection in Linux, the hard part is over.
Don't put the SoupKit.zip on the USB drive before creating the LiveUSB. Instead, use the web browser to navigate to this page and download it once you have Linux running and your Internet connected. Once it's downloaded, you'll likely find it in your Downloads folder.
SoupKit has been tested extensively on all the latest versions of Ubuntu and Mint, but it hasn't really been tested on anything outside of that. Try other distros if you will, but be warned.
To install:
Right-click the “SoupKit.zip”, select “Extract here” open the SoupKit folder and follow the instructions in the README.
Is that all?
NOPE. What SoupKit would be complete without a little something to go with it? SEE POST #2

Due to recent updates, I've decided to remove the option to install Hashcode's 2nd bootloader. There are too many areas where things can go wrong so I think it would be best to let the user follow the small handful of instructions in the 2nd bootloader thread to get it done. IMO, it is not worth the risk to rely on the user to make sure a downgraded stock bootloader is installed before running the script. Plus I think using a script toinstall the downgraded bootloader gives users a false sense of safety in what is potentially very dangerous to do.
​
ROOT PLUS for 2nd Generation Kindle Fires
That's right. This works for ALL 2nd generation Kindle Fires
What does it do?
The screenshot above should answer that question pretty quickly.
What do you need to know?
Since Hashcode's bootloader hack is device specific, you must download the version for your device. Each one has the exact same script but the stack, boot and recovery images are different for each particular device. You must have the SoupKit installed for this to work properly. It installs in the same way as the SoupKit; unzip, double click, run in terminal, blah blah.
Make sure you have ADB enabled under “Security” in the settings.
Anything else?
At any point after installation, if you need to run the utility again, just type "rootplus" in the terminal.
What's next?
I have a few more things in store for you guys and they will all be made for the SoupKit. As packages are installed, just type the name of the package in any terminal to launch them at any point (hence "modular"). Everything will be easy to install, easy to launch, and new user friendly.
Don't be skerrd. Move out of your comfort zone a little and give Linux and SoupKit a try. I'm sure you won't be disappointed.
Credits:
* Bin4ry - of course, for providing the root exploit
* prokennexusa and his team - for testing this out on all of the second generation devices
* Thepooch - for extensive testing and always being there to lend a hand
Downloads:
SoupKit - http://d-h.st/PbX
RootPlus for all Kindle Fires - http://d-h.st/jOe

Changelog:
04-23-2013 - Update (RootPlus)
* Removed option to install Hashcode's 2nd bootloader, for safety reasons. There is absolutely nothing wrong with Hashcode's 2nd bootloader. The risk lies in recent updates from Amazon.
03-19-2013 - Update + bugfix (RootPlus)
* Fixed issue with 2nd bootloader install - everything works as it should now
* Added timestamp to saved partitions. Gives users the ability to save more than one set of partition images
03-18-2013 - Update: (RootPlus)
* Changed how 2nd bootloader is installed for compatibility with the KF2
* Added ability to update custom recovery. No need to update the script every time a new recovery is released.
* Added ability to choose partition images to be installed if more than one set exist in the BACKUP folder
* More intuitive restore of saved partition images - will hopefully prevent any chance of user error
03-16-2013 - Bugfix: (RootPlus)
* Fixed issue with permissions on the rootplus script
03-10-2013 - Update: (RootPlus)
* Added extra safety measures, including MD5 check on 2nd bootloader install
02-23-2013 - Initial release

worked great. thanks for a great tool. easy to use.

Awesome...thank you..just set this up on my ubuntu netbook...going to try it today when I update twrp

Update 3-10-2013: Added extra safety measures, including MD5 check on 2nd bootloader install

Works great!

ok just got a new laptop and tried installing this and no go. i know its my fault..i have a fresh install of ubuntu 13.04 and i followed the instructions but when i double click the install.sh file all it does is open a document... when i installed this on my netbook with ubuntu 12.10 i had no issue. any help would be appreciated. i am new to linux

wojo797 said:
ok just got a new laptop and tried installing this and no go. i know its my fault..i have a fresh install of ubuntu 13.04 and i followed the instructions but when i double click the install.sh file all it does is open a document... when i installed this on my netbook with ubuntu 12.10 i had no issue. any help would be appreciated. i am new to linux
Click to expand...
Click to collapse
Yeah, when I updated the script, I forgot to change the permissions...
Give me a little while and I'll fix it for you.

3-16-2013: Fixed issue with permissions on the rootplus script

the issue wasnt with the rootplus it was with the soupkit itself the install.sh script

wojo797 said:
the issue wasnt with the rootplus it was with the soupkit itself the install.sh script
Click to expand...
Click to collapse
That's interesting. I checked the permissions for all scripts and executables before uploading.
I just checked on it again and they are all executable. Perhaps it has something to do with your settings or the version of Ubuntu you are using (only tested on 12.10 and earlier).
You can make a file or script executable by entering the following in the terminal:
Code:
sudo chmod a+x <file>
Or you can right-click on the file, select Properties > Permissions > "Allow executing file as program"

[OK thankOTE=soupmagnet;39303980]That's interesting. I checked the permissions for all scripts and executables before uploading.
I just checked on it again and they are all executable. Perhaps it has something to do with your settings or the version of Ubuntu you are using (only tested on 12.10 and earlier).
You can make a file or script executable by entering the following in the terminal:
Code:
sudo chmod a+x <file>
Or you can right-click on the file, select Properties > Permissions > "Allow executing file as program"[/QUOTE]
Ok thank you.. Appreciate the help and all then work...I'll try as soon as possible

03-18-2013 - Update: (RootPlus)
* Changed how 2nd bootloader is installed for compatibility with the KF2
* Added ability to update custom recovery. No need to update the script every time a new recovery is released.
* Added ability to choose partition images to be installed if more than one set exist in the BACKUP folder
* More intuitive restore of saved partition images - will hopefully prevent any chance of user error

03-19-2013 - Update + bugfix (RootPlus)
* Fixed issue with 2nd bootloader install - everything works as it should now
* Added timestamp to saved partitions. Gives users the ability to save more than one set of partition images
If you downloaded yesterday's update, please install this one. There was a bug preventing the 2nd bootloader install. It is fixed now.
Sorry for the inconvenience.

04-23-2013 - Update (RootPlus)
* Removed option to install Hashcode's 2nd bootloader, for safety reasons.
By the way, there is absolutely nothing wrong with Hashcode's 2nd bootloader. The risk lies in recent updates from Amazon and the requirement to downgrade the stock bootloader before continuing with the 2nd bootloader install process.

Hi,
I'm totally new to linux, and i managed to install the latest Linux mint (v14.0) I was also able to connect to the internet and i downloaded both the soupkit and rootplus using linux. I extractred the files and doubled clicked on the install.sh as per the readme file however, after i double click it, all the contents of the folder disappear and i don't get any options as per the readme file. The same happens with the rootplus install.sh file, all the files disappear.
These are the steps i've followed.
Installed Linux Mint v14.0 on the system after making necessary partitions(ext4 journal)
Internet connectivity present.
Downloaded both the files into the downloads folder and extracted them
double clicked on the install.sh file and everything disappeared fro the respective folders.
Please guide me as i'm completely blank here.
Regards,
CD

Hi,
I was able to make it work. Instead of double clicking the .sh file, i opened the terminal window in the extracted folder, got super user access and executed this command:
sh install.sh
So now my kindle is rooted and ads free.
Thanks a lot @soupmagnet.
Regards,
CD

So, is it safe to assume this will work on a Kindle Fire HD 8.9" running 8.3.1 fw? Thanks!

anacondo said:
So, is it safe to assume this will work on a Kindle Fire HD 8.9" running 8.3.1 fw? Thanks!
Click to expand...
Click to collapse
Sorry to answer an old post but yes.

Installing Android 4.2.2 CM10.1

Hello guys,
I'm a new noob in the forum. I was following the thread about android on kindle fire hd7 and since this weekend (ty hashcode :good seems i can try the rom on my kindle device. Now... i'm totally noob in this kind of operation, there is something vital or important i have to know before i brick my kindle fire?? OR i can just follow the instruction, install bootloader and then loading the rom? There is a video or something more deep to read before try to install?? Thank you and thank you for your future answer,
Petar

PetarHolland said:
Hello guys,
I'm a new noob in the forum. I was following the thread about android on kindle fire hd7 and since this weekend (ty hashcode :good seems i can try the rom on my kindle device. Now... i'm totally noob in this kind of operation, there is something vital or important i have to know before i brick my kindle fire?? OR i can just follow the instruction, install bootloader and then loading the rom? There is a video or something more deep to read before try to install?? Thank you and thank you for your future answer,
Petar
Click to expand...
Click to collapse
If you haven't already, read this...
http://forum.xda-developers.com/showthread.php?t=2228534
...it will tell you what you need to know to avoid bricking your device, and how to restore it if needed.

Thanks, i will read this, then i'll post here if i still need some information The entire process seems to be very hard ^^
soupmagnet said:
If you haven't already, read this...
http://forum.xda-developers.com/showthread.php?t=2228534
...it will tell you what you need to know to avoid bricking your device, and how to restore it if needed.
Click to expand...
Click to collapse

I'm stoked to see the outcome of that great work of porting the ROM to our kindle fires 7''.
Congrats for that great effort!
I was following the instructions you've provided. Apparently, my situation is that i'm in the 2x2 cell.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Therefore, I have the ADB drivers installed but can not achieve to enter in fastboot mode. What should I do? Should l install android's SDK? Here I'm completely lost in how to proceed...
Thanks in advance

Root first, so head to the QEMU root thread in the Development forum. After that, install the 2nd-bootloader by Hashcode, I recommend you use the FireFlash app in the Themes and Apps forum, just download the files from Hashcode's thread, plug them in, hit flash, and hold Volume-Up when you see the orange Kindle logo, all the way until it turns blue, then release a few seconds after.
Recovery does take a minute to appear, so now you're into TWRP recovery, go ahead and reboot, then download the ROM from Hashcode's CM10.1 thread with the GApps. Transfer the .zip files (both of them, the ROM and the GApps) to the internal storage. Boot into recovery by shutting down, powering on, and hold Volume-Up, same deal. Once you're into TWRP, wipe system and factory reset. After that's done, flash the ROM and the GApps, and you're done. Reboot, and voila.
ed! said:
I'm stoked to see the outcome of that great work of porting the ROM to our kindle fires 7''.
Congrats for that great effort!
I was following the instructions you've provided. Apparently, my situation is that i'm in the 2x2 cell.
Therefore, I have the ADB drivers installed but can not achieve to enter in fastboot mode. What should I do? Should l install android's SDK? Here I'm completely lost in how to proceed...
Thanks in advance
Click to expand...
Click to collapse
Yes, you need to install Android SDK. What allows you to use fastboot is the fastboot.exe file in the /platform-tools folder after you install the SDK. There are many guides on YouTube to doing this.

Thanks for your very kind reply, seokhun
I'm a bit confused now. Do I still need fastboot commands and SDK for the method you suggested? I mean, the one with the app that flashes everything....
Sorry If i'm asking too many questions but as a noob, I'd like to be very cautious with the procedure. I'm still not familiar with the kindle's way. I wish I were with my Samsung Galaxy phone flashing custom roms
I forgot to mention, I was already rooted and have stock rom with bootloader 7.3.1

Indeed... The entire process is hard, i'm trying to organize the information. SO the step are:
-Fastboot
-Installing bootloader
-Cleaning the system/exporting img
-Installing the rom
-Wipe
-Reboot
android :victory:
Right?
Some questions:
I read about a special cable, i can't do the process with the standard miniusb cable?
I read about downgrade the firmware of my kindle... I have the 7.3.0.3 version, i need to downgrade before install the bootloader right?
ed! said:
Thanks for your very kind reply, seokhun
I'm a bit confused now. Do I still need fastboot commands and SDK for the method you suggested? I mean, the one with the app that flashes everything....
Sorry If i'm asking too many questions but as a noob, I'd like to be very cautious with the procedure. I'm still not familiar with the kindle's way. I wish I were with my Samsung Galaxy phone flashing custom roms
I forgot to mention, I was already rooted and have stock rom with bootloader 7.3.1
Click to expand...
Click to collapse

@PetarHolland
I'll try to answer your questions:
Factory cable
You do not absolutely need a factory cable to get into fastboot mode. When you have successfully rooted your device and have the adb drivers setup correctly, the command adb shell su -c "reboot bootloader" will do the trick. A factory cable can be considered an insurance: If push comes to shove and you brick your device, the factory cable will force the Kindle to boot up in fastboot mode.
Firmware downgrade
Just follow Hashcode's instructions given here: http://forum.xda-developers.com/showthread.php?t=2128848 (Step 4.5). Works like a charm.
Good luck to you!

Nice, that's really nice... So i just need to install the bootloader first following the instruction, then install the rom doing the 4.5 step. My doubt are cleared now, i will try tonight I hope with success
E_Zatopek said:
@PetarHolland
I'll try to answer your questions:
Factory cable
You do not absolutely need a factory cable to get into fastboot mode. When you have successfully rooted your device and have the adb drivers setup correctly, the command adb shell su -c "reboot bootloader" will do the trick. A factory cable can be considered an insurance: If push comes to shove and you brick your device, the factory cable will force the Kindle to boot up in fastboot mode.
Firmware downgrade
Just follow Hashcode's instructions given here: http://forum.xda-developers.com/showthread.php?t=2128848 (Step 4.5). Works like a charm.
Good luck to you!
Click to expand...
Click to collapse

PetarHolland said:
Nice, that's really nice... So i just need to install the bootloader first following the instruction, then install the rom doing the 4.5 step. My doubt are cleared now, i will try tonight I hope with success
Click to expand...
Click to collapse
Just a note of caution, as with all flashing of rom's. Whilst the fastboot cable is not 'required/essential' if you do mess it up , there is a potential that you 'could' brick, and depending to what extent your at, the cable becomes vital. In a nutshell if you can get your hands on a cable its recommeded as the earlier thread stated its a kind of insurance!
Good luck
kgyuszko

Thanks to all for your support. Everything worked out as expected and now I'm digging in the Recovery menu
There's one simple step I have to added to the ones written by Hashcode. That is, when trying to copy stack file to /data/local/tmp I had to change permissions to that folder in order to make the transfer happen. Originally was set to rwx-rwx-x and the adb push command failed.
Apart from this, as I said, everything flew as expected
Roughly, what I did was:
- Root the kindle 7.3.1 stock rom with Bin4ry_v28
- Install android SKD
- Follow step by step Hashcode's guide taking care to the permission change of /data/local/tmp till I reached the part of the fastboot commands.
- Active the fastboot with the following command and continue with the steps of the guide:
Code:
adb shell su -c "reboot bootloader"
Now the upcoming and logical question (i guess) is how do you buckup all you current apps and data before flashing a custom ROM?

Guys i stopped myself at the first step.. i followed the root instruction, i've done the file Path trick, and now i'm able to write ADB on my cmd terminal and see all the information, on the device setup i see the android composite adb interface BUT when i launch the RootQemu file this is the message i recive when i try to launch the app: You must install your device specific driver so that the device is visible to ADB. Any way to proceed??? thanks ( i'm running 7.3.1)
ed! said:
Thanks to all for your support. Everything worked out as expected and now I'm digging in the Recovery menu
There's one simple step I have to added to the ones written by Hashcode. That is, when trying to copy stack file to /data/local/tmp I had to change permissions to that folder in order to make the transfer happen. Originally was set to rwx-rwx-x and the adb push command failed.
Apart from this, as I said, everything flew as expected
Roughly, what I did was:
- Root the kindle 7.3.1 stock rom with Bin4ry_v28
- Install android SKD
- Follow step by step Hashcode's guide taking care to the permission change of /data/local/tmp till I reached the part of the fastboot commands.
- Active the fastboot with the following command and continue with the steps of the guide:
Code:
adb shell su -c "reboot bootloader"
Now the upcoming and logical question (i guess) is how do you buckup all you current apps and data before flashing a custom ROM?
Click to expand...
Click to collapse

from ondom
UPDATE:
i used the bin4ry v29 to root my kindle fire, i have the superuser folder on my app screen, so i think everythings goes ok. now following the hashcode instruction to get Bootloader, i'm stucked launching the fastboot mode:
i type in my cmd:
fastboot -i 0x1949 getvar product
I get the <waiting for device> screen
but when i connect my kindle, they start normally and no "product: Tate-XXX-XX" screen appear.
Where i'm wrong??? How can i launch the fastboot mode?
PetarHolland said:
Guys i stopped myself at the first step.. i followed the root instruction, i've done the file Path trick, and now i'm able to write ADB on my cmd terminal and see all the information, on the device setup i see the android composite adb interface BUT when i launch the RootQemu file this is the message i recive when i try to launch the app: You must install your device specific driver so that the device is visible to ADB. Any way to proceed??? thanks ( i'm running 7.3.1)
Click to expand...
Click to collapse

ed! said:
Thanks to all for your support. Everything worked out as expected and now I'm digging in the Recovery menu
There's one simple step I have to added to the ones written by Hashcode. That is, when trying to copy stack file to /data/local/tmp I had to change permissions to that folder in order to make the transfer happen. Originally was set to rwx-rwx-x and the adb push command failed.
Apart from this, as I said, everything flew as expected
Roughly, what I did was:
- Root the kindle 7.3.1 stock rom with Bin4ry_v28
- Install android SKD
- Follow step by step Hashcode's guide taking care to the permission change of /data/local/tmp till I reached the part of the fastboot commands.
- Active the fastboot with the following command and continue with the steps of the guide:
Code:
adb shell su -c "reboot bootloader"
Now the upcoming and logical question (i guess) is how do you buckup all you current apps and data before flashing a custom ROM?
Click to expand...
Click to collapse
Once you have Hashcode's TWRP build, simply backup using the Backup option from the recovery's main menu. If anything occurs when you flash ROMs, boot back into recovery and restore.
PetarHolland said:
UPDATE:
i used the bin4ry v29 to root my kindle fire, i have the superuser folder on my app screen, so i think everythings goes ok. now following the hashcode instruction to get Bootloader, i'm stucked launching the fastboot mode:
i type in my cmd:
fastboot -i 0x1949 getvar product
I get the <waiting for device> screen
but when i connect my kindle, they start normally and no "product: Tate-XXX-XX" screen appear.
Where i'm wrong??? How can i launch the fastboot mode?
Click to expand...
Click to collapse
Your fastboot isn't working properly. Did you make sure that your fastboot worked? In order for fastboot to work, you must have installed Android SDK. Videos are available on YouTube to help you do this. Once you correctly set up Android SDK, you will automatically have fastboot.
Otherwise, your ADB drivers aren't working. When you turn on the tablet, go to Settings > Security > ADB and turn it on. Then plug your tablet into the computer. Now your ADB drivers will be installed. This will allow you to use fastboot.

How can i test if my fastboot work? if i type fastboot on cmd i have the entire instruction of fastboot, so the command is recognised....
seokhun said:
Once you have Hashcode's TWRP build, simply backup using the Backup option from the recovery's main menu. If anything occurs when you flash ROMs, boot back into recovery and restore.
Your fastboot isn't working properly. Did you make sure that your fastboot worked? In order for fastboot to work, you must have installed Android SDK. Videos are available on YouTube to help you do this. Once you correctly set up Android SDK, you will automatically have fastboot.
Otherwise, your ADB drivers aren't working. When you turn on the tablet, go to Settings > Security > ADB and turn it on. Then plug your tablet into the computer. Now your ADB drivers will be installed. This will allow you to use fastboot.
Click to expand...
Click to collapse

fastboot -i 0x1949 getvar product

<waiting for device>
but when i plug my kindle fire and reboot, no fastboot, still <waiting for device>
I previously installed the sdk developer tool and changed the PATH adding the skd folder path to the windows shortcut for the cmd.
soupmagnet said:
fastboot -i 0x1949 getvar product
Click to expand...
Click to collapse

You don't reboot. When you enter that command and get the <waiting>, leave the tablet turned off and just plug it in. If your fastboot works, you'll be in fastboot mode.

Nope, i tryed every possibility, plugging turned off, plugging turned on and reboot, leaving to "waiting for device" for 2 hours, and nothing happened. soupmagnet suggested me to use the kindle first aid script to reinstall the adb drivers, seems the best option atm....
seokhun said:
You don't reboot. When you enter that command and get the <waiting>, leave the tablet turned off and just plug it in. If your fastboot works, you'll be in fastboot mode.
Click to expand...
Click to collapse

Cyanogenmod logo all the time
seokhun said:
Root first, so head to the QEMU root thread in the Development forum. After that, install the 2nd-bootloader by Hashcode, I recommend you use the FireFlash app in the Themes and Apps forum, just download the files from Hashcode's thread, plug them in, hit flash, and hold Volume-Up when you see the orange Kindle logo, all the way until it turns blue, then release a few seconds after.
Recovery does take a minute to appear, so now you're into TWRP recovery, go ahead and reboot, then download the ROM from Hashcode's CM10.1 thread with the GApps. Transfer the .zip files (both of them, the ROM and the GApps) to the internal storage. Boot into recovery by shutting down, powering on, and hold Volume-Up, same deal. Once you're into TWRP, wipe system and factory reset. After that's done, flash the ROM and the GApps, and you're done. Reboot, and voila.
Yes, you need to install Android SDK. What allows you to use fastboot is the fastboot.exe file in the /platform-tools folder after you install the SDK. There are many guides on YouTube to doing this.
Click to expand...
Click to collapse
I did exactly this and now i get the cyanogenmod logo all the time after reboot. been this way for 40 mins already. Can someone suggest what to do next?

A pure C implementation of 'cuber' using OpenSSL's BigNum library

In case anybody cares, here's a pure C reimplementation of 'cuber.py'
(my own earlier reimplementation of @vortox's signature.py).
This is what I'm using in my '1-Click' bootloader unlock VM...
See 'grep ^gcc' for "build instructions".
Hack, you can probably build this for ARM and run it right on your very HDX tablet... (-;
UPDATE (JanuaryFebruary 2017):
OK; so, @zivimo had built this for ARM, but people still haven't noticed.
I repacked his binary from a .tar.gz to a .zip archive and decided to spell out the instructions for use.
Perhaps, this helps... With the right bootloader in place, and adb/fastboot installed (and working),
the unlock is as easy as follows...
Download and extract unlock.zip (SHA256: e40e3010f8eccfa9cbd1e73eecac30cf799099d183de23b2d256fc3407f143f6e5db0b8d82c8fd2a25a22b0a598014d22a2ec33cef27a8d4b65a36acde08f27a)
to the same directory that holds the adb and fastboot executables (unless you have added them to your PATH)
Click on get_code.bat in the extracted folder
-- optional (but commonly required) step(s) --
fix root (roll back, if you need to), flash vulnerable bootloader
[you'll definitely need to perform at least some of these if the last step fails]
Click on unlock.bat in the extracted folder
The archive also includes .sh variants of the .bat files for convenience.
You could also just click to show the hidden section and cut&paste... (-;
Code:
[STRIKE]unzip cuber.zip[/STRIKE]
adb push cuber /data/local/tmp/
adb shell chmod 0755 /data/local/tmp/cuber
adb shell 'id=$(cat /sys/class/block/mmcblk0/device/{manfid,serial}); echo "$id"; echo 0x${id:6:2}${id:11:8} | /data/local/tmp/cuber > /sdcard/unlock.code'
adb pull /sdcard/unlock.code
adb shell rm /sdcard/unlock.code /data/local/tmp/cuber
adb reboot-bootloader
fastboot -i 0x1949 flash unlock unlock.code
NOTE: download and extract the attached 'cuberunlock.zip' and run the above commands
in the directory where 'cuber' got extracted to.

Nice job! Originally I wanted to use OpenSSL BigNum too, but I hadn't enough time and Python was easier to use

hey,
made a static compile with an arm debian (jessie). seemed the easiest solution to me. compile command:
Code:
# gcc -fPIE -static cuber.c -o cuber -lssl -lcrypto
# strip cuber
# ldd cuber
not a dynamic executable
# ./cuber
Usage: cuber [RSA-bytes] < data > sig
seems to work. arm(!) binary attached.

ok draxie, you pointed me here but something seems to be missing. i downloaded unlock.zip, put the files in my adb directory. when i run get_code.bat, it pushes cuber to the kindle in the right directory, changes permissions (dont see any errors there) but then stops saying the system can't find the specified path. Whats funny is i used es file explorer to check the paths in the script, and they are there so not sure where the hang up is.

chin_bone said:
ok draxie, you pointed me here but something seems to be missing. i downloaded unlock.zip, put the files in my adb directory. when i run get_code.bat, it pushes cuber to the kindle in the right directory, changes permissions (dont see any errors there) but then stops saying the system can't find the specified path. Whats funny is i used es file explorer to check the paths in the script, and they are there so not sure where the hang up is.
Click to expand...
Click to collapse
Did you check all three paths?
/data/local/tmp
/sdcard
/sys/class/block/mmcblk0
The 2nd one _may_ be problematic if you're on SafeStrap.
I don't know why. I'm yet to install that on one of my test
devices to investigate. (Or, was that the 1st... )
The 0 in the 3rd one may actually be a 1 on some systems.
I have a few extra lines in my VM script to work around
that, I can easily add that here as well, if that turns out
to be the issue.
BUT, to try and troubleshoot: how far does the script get?
If it didn't complain with the permissions, the 1st path is probably OK.
Does it print your manfid/serial?
If so, mmcblkX would be right as well.
Any chance that you're on SafeStrap?
Can you push/pull to/from /sdcard?
- - - - -
On a second thought: I've only ever tested this on Linux.
String quoting on Windows may work differently, and could *royally* mess up how that more complex command is interpreted.
I'll test tomorrow; it's like 20 past 1am here. I need to get some sleep.
In the meantime, as a workaround, you could just hard-code your manfid/serial, and replace this line:
Code:
adb shell 'id=$(cat /sys/class/block/mmcblk0/device/{manfid,serial}); echo "$id"; echo 0x${id:6:2}${id:11:8} | /data/local/tmp/cuber > /sdcard/unlock.code'
by the decidedly much simpler:
Code:
adb shell 'echo 0xmmssssssss | /data/local/tmp/cuber > /sdcard/unlock.code'

draxie said:
Did you check all three paths?
/data/local/tmp
/sdcard
/sys/class/block/mmcblk0
The 2nd one _may_ be problematic if you're on SafeStrap.
I don't know why. I'm yet to install that on one of my test
devices to investigate. (Or, was that the 1st... )
The 0 in the 3rd one may actually be a 1 on some systems.
I have a few extra lines in my VM script to work around
that, I can easily add that here as well, if that turns out
to be the issue.
BUT, to try and troubleshoot: how far does the script get?
If it didn't complain with the permissions, the 1st path is probably OK.
Does it print your manfid/serial?
If so, mmcblkX would be right as well.
Any chance that you're on SafeStrap?
Can you push/pull to/from /sdcard?
- - - - -
On a second thought: I've only ever tested this on Linux.
String quoting on Windows may work differently, and could *royally* mess up how that more complex command is interpreted.
I'll test tomorrow; it's like 20 past 1am here. I need to get some sleep.
Click to expand...
Click to collapse
It's all good draxie, i figured out what i was doing wrong with the other procedure, that damn STEP 2, once i did it, everything fell into place. Bootloader unlocked and now just trying to figure out which rom to try first. Thanks again, you guys are great and i know how valuable everyones time is. :good:

I keep hitting road blocks, I am rooted and on Fire OS 4.5.5.2 I click get code a screen flashes up then I click Unlock and my Kindle boots to the Grey Kindle screen with Fastboot underneath and nothing else happens. Same happens when I copy and past the code into ADB. What step am I failing at? Thanks for the help!

pdanforth said:
I keep hitting road blocks, I am rooted and on Fire OS 4.5.5.2 I click get code a screen flashes up then I click Unlock and my Kindle boots to the Grey Kindle screen with Fastboot underneath and nothing else happens. Same happens when I copy and past the code into ADB. What step am I failing at? Thanks for the help!
Click to expand...
Click to collapse
@draxie - I have no experience with this tool; python/gmpy2 works reliably for me. Sorry to pull you in ...

Davey126 said:
@draxie - I have no experience with this tool; python/gmpy2 works reliably for me. Sorry to pull you in ...
Click to expand...
Click to collapse
I am up and running now, unlocked and running kk-fire-nexus-rom-thor-20161017. Play store is also up and running.

pdanforth said:
I am up and running now, unlocked and running kk-fire-nexus-rom-thor-20161017. Play store is also up and running.
Click to expand...
Click to collapse
Did you end up using some other method, or did these scripts work for you in the end?
Either way, others may find useful if you could share whatever worked for you. (-;
Unfortunately, I still haven't had a chance to test these scripts in Windows;
so, I couldn't answer your first call for help in a good way. If there's something
wrong and there's enough interest, I'll be happy to fix it as soon as I can.

draxie said:
Did you end up using some other method, or did these scripts work for you in the end?
Either way, others may find useful if you could share whatever worked for you. (-;
Unfortunately, I still haven't had a chance to test these scripts in Windows;
so, I couldn't answer your first call for help in a good way. If there's something
wrong and there's enough interest, I'll be happy to fix it as soon as I can.
Click to expand...
Click to collapse
@stangri did my unlock file and I used this thread to unlock https://forum.xda-developers.com/kindle-fire-hdx/general/thor-unlocking-bootloader-firmware-t3463982
I had trouble making the Unlock file, once that was done and some help from other users I am now up and running!

Amazon Fire 7" - Which ROM to install?

Hi,
I have the Amazon Fire 7" (not the Fire HD "7!). I did not find any Android ROM for this model, only for the Fire HD 7". Is it possible that such ROM does not exist?
If I'm mistaken, would appreciate if someone could refer me to the proper thread.

moralshixch said:
Hi,
I have the Amazon Fire 7" (not the Fire HD "7!). I did not find any Android ROM for this model, only for the Fire HD 7". Is it possible that such ROM does not exist?
If I'm mistaken, would appreciate if someone could refer me to the proper thread.
Click to expand...
Click to collapse
You need to identify the version of your Kindle. If its the otter2 try these threads over here:
http://forum.xda-developers.com/kindle-fire-hd/fire-2-development
another helpful discussion for you:
http://forum.cyanogenmod.org/topic/90173-otter-or-otter2/
---------- Post added at 02:43 AM ---------- Previous post was at 02:27 AM ----------
If it helps I can attach all the recovery/rom/and gapps that I'm using that seem to work well. I was using pac-rom but switched to slimkat a while ago. I only use this for a bedside alarm clock right now, but I'm thinking of putting it side mounted in my car into my stereo auxiliary running Kodi with the Car Skin they got going on in a thread. I'm not using the latest slimkat rom either I'm using an old version because it works well for me.

How do I identify the version of my Kindle? If it helps, it's the 5th generation that was sold during last December in Amazon for $35

moralshixch said:
How do I identify the version of my Kindle? If it helps, it's the 5th generation that was sold during last December in Amazon for $35
Click to expand...
Click to collapse
You'd need to first install the Kindle drivers, as well as ADB and fastboot, on your PC. Then you would need to completely power off the kindle, type fastboot -i 0x1949 getvar product into a terminal or command prompt, and plug in the Kindle when you see <waiting for device>. Assuming you do this correctly, you should get an output like "jem-pvt-prod-04" in your terminal. The word before the first hyphen in the output (in this example, " jem", which is an example and NOT your particular model's codename) is your device's codename. You should take note of this codename and mention it whenever you're looking for ROMs or device assistance (rooting, flashing a custom recovery, etc.). Once you have the device codename, type fastboot -i 0x1949 reboot to get out of fastboot.

monster1612 said:
You'd need to first install the Kindle drivers, as well as ADB and fastboot, on your PC. Then you would need to completely power off the kindle, type fastboot -i 0x1949 getvar product into a terminal or command prompt, and plug in the Kindle when you see <waiting for device>. Assuming you do this correctly, you should get an output like "jem-pvt-prod-04" in your terminal. The word before the first hyphen in the output (in this example, " jem", which is an example and NOT your particular model's codename) is your device's codename. You should take note of this codename and mention it whenever you're looking for ROMs or device assistance (rooting, flashing a custom recovery, etc.). Once you have the device codename, type fastboot -i 0x1949 reboot to get out of fastboot.
Click to expand...
Click to collapse
I realize this thread is a little old, but I too am trying to get something else on my Kindle Fire other than Fire OS if possible (LineageOS more than likely). Where might I find all of these drivers and utilities, as I have no idea what my Kindle's codename is.
Thanks!

MZGSZM said:
I realize this thread is a little old, but I too am trying to get something else on my Kindle Fire other than Fire OS if possible (LineageOS more than likely). Where might I find all of these drivers and utilities, as I have no idea what my Kindle's codename is.
Thanks!
Click to expand...
Click to collapse
The driver is available on Amazon's developer site, under the "Installing the USB Driver" section. This is assuming you're using Windows, of course.
The ADB binaries can also be downloaded directly from Google as a single .zip file. Once you have both of those downloaded, you should be able to extract the ADB package to an easily accessible directory, right-click on an empty space within the folder view of said directory while holding the shift key down, click "Open command prompt here", and then type the fastboot command I mentioned in the previous reply to identify your kindle.
(Apologies for the late reply!)

Thanks for the information. I got the driver installed and extracted the platform tools. I also enabled ADB from developer options on the Kindle. Problem is, when I run that command you previously mentioned I get this message:
Code:
< waiting for any device >
Nothing else happens, it just keeps waiting.

monster1612 said:
The driver is available on Amazon's developer site, under the "Installing the USB Driver" section. This is assuming you're using Windows, of course.
The ADB binaries can also be downloaded directly from Google as a single .zip file. Once you have both of those downloaded, you should be able to extract the ADB package to an easily accessible directory, right-click on an empty space within the folder view of said directory while holding the shift key down, click "Open command prompt here", and then type the fastboot command I mentioned in the previous reply to identify your kindle.
(Apologies for the late reply!)
Click to expand...
Click to collapse
I realized I never quoted you in my last reply (forums didn't like me quoting links since my account is so new), so you probably wouldn't see my previous reply. Thanks again for your help, I quoted my last post below.
MZGSZM said:
Thanks for the information. I got the driver installed and extracted the platform tools. I also enabled ADB from developer options on the Kindle. Problem is, when I run that command you previously mentioned I get this message:
Code:
< waiting for any device >
Nothing else happens, it just keeps waiting.
Click to expand...
Click to collapse

MZGSZM said:
I realized I never quoted you in my last reply (forums didn't like me quoting links since my account is so new), so you probably wouldn't see my previous reply. Thanks again for your help, I quoted my last post below.
Thanks for the information. I got the driver installed and extracted the platform tools. I also enabled ADB from developer options on the Kindle. Problem is, when I run that command you previously mentioned I get this message:
Click to expand...
Click to collapse
If you go into the device manager within windows and have the Kindle plugged in, does the Kindle show up in its own category? if it doesn't, try giving it a few minutes to install the driver for the device. Also, if you get a prompt on the Kindle asking if you want to "trust" the development computer, you'll want to accept that.

monster1612 said:
If you go into the device manager within windows and have the Kindle plugged in, does the Kindle show up in its own category? if it doesn't, try giving it a few minutes to install the driver for the device. Also, if you get a prompt on the Kindle asking if you want to "trust" the development computer, you'll want to accept that.
Click to expand...
Click to collapse
The device does show up in its own category:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Assuming this is the correct one, I'm not sure why I still can't get a readout.

monster1612 said:
If you go into the device manager within windows and have the Kindle plugged in, does the Kindle show up in its own category? if it doesn't, try giving it a few minutes to install the driver for the device. Also, if you get a prompt on the Kindle asking if you want to "trust" the development computer, you'll want to accept that.
Click to expand...
Click to collapse
Hate to sound like a nag, but hoping you saw my last post. Any thoughts on why I'm not getting a readout? Thanks again!

MZGSZM said:
The device does show up in its own category:
Assuming this is the correct one, I'm not sure why I still can't get a readout.
Click to expand...
Click to collapse
That's the right category. Theoretically, the device should be recognized in ADB if you already have it enabled on the Kindle. Try going to the device properties and "updating" the driver by selecting a different one from the list of Fire-specific drivers installed.
My apologies for the extreme lapse in response time - I went through finals earlier this month, and totally forgot about XDA for a while. Anyhow, I haven't worked with the Kindle on Windows in a while - drivers are notoriously finicky, so I tend to use Ubuntu and other Linux OSs for adb and whatnot, seeing as though everything seems to just work without the need for device-specific drivers on that platform.

monster1612 said:
That's the right category. Theoretically, the device should be recognized in ADB if you already have it enabled on the Kindle. Try going to the device properties and "updating" the driver by selecting a different one from the list of Fire-specific drivers installed.
My apologies for the extreme lapse in response time - I went through finals earlier this month, and totally forgot about XDA for a while. Anyhow, I haven't worked with the Kindle on Windows in a while - drivers are notoriously finicky, so I tend to use Ubuntu and other Linux OSs for adb and whatnot, seeing as though everything seems to just work without the need for device-specific drivers on that platform.
Click to expand...
Click to collapse
Hey, no worries. I know how crazy life can get sometimes.
I tried using the different driver versions available without any luck. My laptop currently has a copy of Ubuntu installed, so I could definitely try it on there (with some guidance from you). I'm pretty familiar with how to use the terminal, and would've tried it under Linux had I known it might've been easier.
Thanks again for all of your assistance!

MZGSZM said:
Hey, no worries. I know how crazy life can get sometimes.
I tried using the different driver versions available without any luck. My laptop currently has a copy of Ubuntu installed, so I could definitely try it on there (with some guidance from you). I'm pretty familiar with how to use the terminal, and would've tried it under Linux had I known it might've been easier.
Thanks again for all of your assistance!
Click to expand...
Click to collapse
Nice! I don't know if you need to enable the universe software repo within Ubuntu before you can install the adb programs, but you should be able to type sudo apt-get install android-tools-adb android-tools-fastboot to have them install. After that, you can use the fastboot commands exactly the way you would on Windows, and thus should be able to get the Kindle to boot into fastboot directly from a powered off state. Let me know if you need any other advice or help.

monster1612 said:
Nice! I don't know if you need to enable the universe software repo within Ubuntu before you can install the adb programs, but you should be able to type sudo apt-get install android-tools-adb android-tools-fastboot to have them install. After that, you can use the fastboot commands exactly the way you would on Windows, and thus should be able to get the Kindle to boot into fastboot directly from a powered off state. Let me know if you need any other advice or help.
Click to expand...
Click to collapse
So, I'm still not having any luck. I'm not entirely sure why, I'm guessing maybe I'm missing something?
I've tried getting fastboot to work on three different devices now, two of which were running a Linux OS, the third Windows 7.
I'm running the mentioned fastboot command and then connecting the kindle over USB while it is powered off. ADB is enabled in developer settings.
I've tried running the command with or without the ADB daemon started and with or without the computer in question being authorized as I wasn't sure if that was necessary.
I tried it on my laptop (which is now running Kubuntu) without success but, also read somewhere that fastboot doesn't like USB 3.0. For that reason I tried it also on one of my Raspberry Pi 3s with a fresh install of Raspbian Lite. I didn't have anything else available at the moment running Linux.
I'm guessing I'm probably just missing something small or did one of the steps incorrectly maybe.

MZGSZM said:
So, I'm still not having any luck. I'm not entirely sure why, I'm guessing maybe I'm missing something?
I've tried getting fastboot to work on three different devices now, two of which were running a Linux OS, the third Windows 7.
I'm running the mentioned fastboot command and then connecting the kindle over USB while it is powered off. ADB is enabled in developer settings.
I've tried running the command with or without the ADB daemon started and with or without the computer in question being authorized as I wasn't sure if that was necessary.
I tried it on my laptop (which is now running Kubuntu) without success but, also read somewhere that fastboot doesn't like USB 3.0. For that reason I tried it also on one of my Raspberry Pi 3s with a fresh install of Raspbian Lite. I didn't have anything else available at the moment running Linux.
I'm guessing I'm probably just missing something small or did one of the steps incorrectly maybe.
Click to expand...
Click to collapse
Does your Linux distro recognize the device if you have it plugged in while you're in the Kindle's main OS and you type adb devices? It should work if you have ADB enabled in developer settings.

monster1612 said:
Does your Linux distro recognize the device if you have it plugged in while you're in the Kindle's main OS and you type adb devices? It should work if you have ADB enabled in developer settings.
Click to expand...
Click to collapse
Yep, if I type that a message pops up on screen saying it's unauthorized. The kindle then asks me if it should be authorized.

Try running fastboot as root.

basenjidad said:
Try running fastboot as root.
Click to expand...
Click to collapse
Thanks for the suggestion. I gave that a shot, still no luck getting this Kindle to fastboot.

monster1612 said:
You'd need to first install the Kindle drivers, as well as ADB and fastboot, on your PC. Then you would need to completely power off the kindle, type fastboot -i 0x1949 getvar product into a terminal or command prompt, and plug in the Kindle when you see <waiting for device>. Assuming you do this correctly, you should get an output like "jem-pvt-prod-04" in your terminal. The word before the first hyphen in the output (in this example, " jem", which is an example and NOT your particular model's codename) is your device's codename. You should take note of this codename and mention it whenever you're looking for ROMs or device assistance (rooting, flashing a custom recovery, etc.). Once you have the device codename, type fastboot -i 0x1949 reboot to get out of fastboot.
Click to expand...
Click to collapse
After installing LineageOS on another device, I learned of a command that should force the Kindle to fastboot, and it seemed to work. When I ran the suggested fastboot command I got this output:
Code:
product: AUSTIN
finished. total time: 0.004s
Where might be my next step in finding a compatible ROM?
Many thanks again!