I was on Mackay rom and before that I was on IZS. But when I tried to flash IZS I got stuck in a boot loop, the phone just hangs on the LG logo and is unresponsive. Can anyone tell me what I can do to fix it?
Sent from my LG-P970 using xda app-developers app
Which version you installed? You need to install the version 0 first before flashing the update packages
Sent from my Nexus 4 using xda premium
and also check if the file download was complete!
Sv: Boot loop when I try install IZS
Zaihanzainal said:
Which version you installed? You need to install the version 0 first before flashing the update packages
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
If you did a full wipe this is yor solution
Cheers
Daniel
theaks30 said:
and also check if the file download was complete!
Click to expand...
Click to collapse
I use the same version 0 file I had used the first time to install it. The firt time I installed I did v0 and then v0.1 and later v0.2 and then v0.4. Then I decided to try Mackay as I really want Jelly Bean, but the stability, battery life and camera on IZS is just great and that's why I wanted to go back.
Anyway, so my phone got stuck in a bootloop and the only way I could recover it was to use smart flash and flash my old v20e, then I did a full wipe and then tried IZS but got same boot loop. I then did the whole process again with smartflash and v20e and tried JellyBam v4 and Mackay version 2.6.3 and they worked fine. So not sure IZS won't work. Mackay is def not the worst rom to be stuck on, in fact if it had a better camera and not the sd card issues of cm10.1 then it would be just as good in my opinion.
So any ideas? Thanks in advance
Sv: Boot loop when I try install IZS
Try to use pre-izs package
Cheers
Daniel
As RomWiz said if you use Smartflash anyway use the PRE_IZS_IMAGE (do it like Huexxx explaind in 'case C') and next time you might know why it sometimes is very good to have a nandroid. If you had done that as you still where on IZS before you tryed Mackay you probably could have restored that nandroid much easyer.
SaschaKH said:
As RomWiz said if you use Smartflash anyway use the PRE_IZS_IMAGE (do it like Huexxx explaind in 'case C') and next time you might know why it sometimes is very good to have a nandroid. If you had done that as you still where on IZS before you tryed Mackay you probably could have restored that nandroid much easyer.
Click to expand...
Click to collapse
Thanks, I will try the PRE IZS image. The funny thing is I did make a nandroid backup before changing to Mackay, but when I tried to restore it, the MD5sum didn't match for some reason. Any idea why that would be?
Anyway thanks guys you have been super helpful and friendly too
OneBadPig said:
Thanks, I will try the PRE IZS image. The funny thing is I did make a nandroid backup before changing to Mackay, but when I tried to restore it, the MD5sum didn't match for some reason. Any idea why that would be?
Click to expand...
Click to collapse
It can happen if you rename the nandroid. The name is part of the MD5sum and some programs that help you with reorg your backups should change that, but I had it already that they mess up. Or some backups are dammaged anyway. If you make the backup in CWM directly the changes that it's not OK are slimmer as when you make it with the online nandroid backup app, but both happend to me already. I think in some CWM you can turn the MD5 check off.
I tend to make a backup nearly every week, so if one is bad it might not be so bad. I copy the backups every 3-4 weeks to my PC that I can delete the older ones on my SD card and after 3-4 month I delete them on my PC. Hey hey I make more backups on my phone than on my PC. :laugh:
Good idea, I think that is a great plan. Thanks
Sent from my LG-P970 using xda app-developers app
OneBadPig said:
Good idea, I think that is a great plan. Thanks
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Just to let you know I did option C as Huexxx says, using the PRE IZS and smart flash, but still got same boot loop. Weird that it didn't work hey. Anyway I suppose I will just have to hope that Mackay can improve the camera. Thanks again for your help:fingers-crossed:
I just saw that if you downgrade Zeus 7.06 to 7.0 you need to flash a boot loop fixer Heuxxx's site. Could that Bea similar problem for me coming from 4.2.2 Mackay ROM back to IZS
Sent from my LG-P970 using xda app-developers app
AW: Boot loop when I try install IZS
OneBadPig said:
I just saw that if you downgrade Zeus 7.06 to 7.0 you need to flash a boot loop fixer Heuxxx's site. Could that Bea similar problem for me coming from 4.2.2 Mackay ROM back to IZS
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Just flash a stock v20, do a factory reset from hidden menu and it should work out just fine then try to flash izs again.
Sent from my LG-P970 using xda app-developers app
Related
Deleted.
Sorry to hear that. Glad you got your phone up and running though.
Sent from my GT-P1000 using XDA Premium App
I think that your error is this: " I restored my stock rom " not gingerfire..
- - -
chemicalrage said:
I usually switch b/w roms with the backup of stock rom . Nothing happens. This time phone got raped.
Click to expand...
Click to collapse
Strange, how you have restored stock rom?
I agree... Its not possible to restore stock rom on custom rom (because of ext partiiton). Though backup is possible through latest CWM recovery...
- - -
chemicalrage said:
I figured out the problem. It was CWM 5.0.2.6 It has lots of bugs.
Click to expand...
Click to collapse
I have no one problem w last recovey, but i am happy that you has solve finally the problem .. all the best
;;-))
im using ginger fire n every goes fine
dont know bout wifi n bluetooth, never try it !
Sent from my GT-S5570 using Tapatalk
On, I flashed overcome, and it gave me a new recovery. I then restored my stock ROM backup. It got stuck in a boot loop
Now I can't boot to recovery!! Help!!
I can get to download now, but how can I get to recovery? Please please help!!
Sent from my HTC Desire S using xda premium
Get the overcome kernel in .tar format, flash it via odin. You should get a recovery mode.
Or find a CWM in the dev section flashable from odin or heimdell.
yappoe said:
Get the overcome kernel in .tar format, flash it via odin. You should get a recovery mode.
Or find a CWM in the dev section flashable from odin or heimdell.
Click to expand...
Click to collapse
Thank you soooo much! the link to the kernel doesnt work!! do you have a spare link or a mirror please? Much appreciated mate!
olyloh6696 said:
Thank you soooo much! the link to the kernel doesnt work!! do you have a spare link or a mirror please? Much appreciated mate!
Click to expand...
Click to collapse
Hold on I'm on an iPad. let me startup my computer and upload the tar file here
yappoe said:
Hold on I'm on an iPad. let me startup my computer and upload the tar file here
Click to expand...
Click to collapse
I love you man. seriously. Your effort is really really really appreciated. I can't express it in words. Thanks a lot man, you're a legend!
So will this definitely fix my problem? So, flashing the kernel should also give me the recovery right? so from there, I press volume up and power, and will that give me the overcome recovery?
then do i just restore my overcome backup, and reboot, will everything be wokring as it should?
Thanks a lot once again man, you have really saved my pants, I feared the worse for my tab!
Btw, when I was on overcome, I never managed to nandroid restore.
Not bootloop, just the result force closes. And I had to wipe data and restore from TB.
Edit: kernel download fine from here.
Have you heard of the anonymouse site?
Sometimes you can use that to proxy.
Sent from my GT-P1000 using XDA
Thanks! But once I have the Overcome recovery back, will my overcome backup restore? Will that work and be possible?
So once i flash the kernel, can i access the recovery by volume up and power? Can you confirm this please mate? Cause at the moment, pressing it does nothing, but i guess it is because i have no recovery installed, am i right?
cheers
yappoe said:
Hold on I'm on an iPad. let me startup my computer and upload the tar file here
Click to expand...
Click to collapse
Ok. try this.
If you were in overcome ROM, if you are on the SAMSUNG bootloop and get into download, you should get into recovery by flashing the overcome kernel.
if not we'll try something else.
priyana said:
Btw, when I was on overcome, I never managed to nandroid restore.
Not bootloop, just the result force closes. And I had to wipe data and restore from TB.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
So he won't get get his old overcome backup from the Nandroid restore?
That is strange but since I wasn't in overcome rom for long I trust you with it
If that is the case, then you may need to restock or reinstall overcome kernel.
Man, you are a legend!! Worked brilliantly!!
Got to recovery, just restored my backup, thanks for all mate, really really appreciated!
You are a genuine true member of XDA, helping your neighbour in need
Thanks for uploading!
Sent from my HTC Desire S using xda premium
olyloh6696 said:
Man, you are a legend!! Worked brilliantly!!
Got to recovery, just restored my backup, thanks for all mate, really really appreciated!
You are a genuine true member of XDA, helping your neighbour in need
Thanks for uploading!
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Glad it works buddy. Almost everyone of us here has been through these situations and I know how it feels.
Seems like it works for you.
It was strange that my nandroid restore always bad in overcome.
Maybe just unlucky... but haven't been on overcome for long.
Sent from my GT-P1000 using XDA
priyana said:
Seems like it works for you.
It was strange that my nandroid restore always bad in overcome.
Maybe just unlucky... but haven't been on overcome for long.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Yeah, was lucky, all good and working now
Wad there ever a ICS value pal for the tab? Or was 2.3.6 the last update ever got?
Sent from my GT-P1000 using xda premium
olyloh6696 said:
Yeah, was lucky, all good and working now
Wad there ever a ICS value pal for the tab? Or was 2.3.6 the last update ever got?
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Funny that you asked. I just bookmarked Priyana's ICS install instruction.
There is no official ICS for our tab and will never be. There is a value-pack update coming, a gingerbread with some ICS taste.
However, there are several unofficial ICS roms around. CM9 and AOKP-SGT7 being the most stable ones (although many people still have small problems with some stabilities and inconcistancies). am on AOKP myself - for the past 3 months - and happy with it.
For AOKP install instruction, refer to this
http://forum.xda-developers.com/showpost.php?p=27500461&postcount=5
you are halfway done through installing AOKP, btw.
yappoe said:
Funny that you asked. I just bookmarked Priyana's ICS install instruction.
There is no official ICS for our tab and will never be. There is a value-pack update coming, a gingerbread with some ICS taste.
However, there are several unofficial ICS roms around. CM9 and AOKP-SGT7 being the most stable ones (although many people still have small problems with some stabilities and inconcistancies). am on AOKP myself - for the past 3 months - and happy with it.
For AOKP install instruction, refer to this
http://forum.xda-developers.com/showpost.php?p=27500461&postcount=5
you are halfway done through installing AOKP, btw.
Click to expand...
Click to collapse
Woo hoo, brilliant, I might try to install later on when I'm familiar with overcome.
Having said that, overcome was working brilliantly for me, but this morning, my device rebooted 3 time! After that I got random force closes, and now the apps won't load.
Is this due to the kernel being undervolted? Which app can I use to overvolt? SetCPU only seems to let me undervolt, not overvolt... Any suggestions mate?
Sent from my HTC Desire S using xda premium
olyloh6696 said:
Woo hoo, brilliant, I might try to install later on when I'm familiar with overcome.
Having said that, overcome was working brilliantly for me, but this morning, my device rebooted 3 time! After that I got random force closes, and now the apps won't load.
Is this due to the kernel being undervolted? Which app can I use to overvolt? SetCPU only seems to let me undervolt, not overvolt... Any suggestions mate?
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Probably more like factory reset wipe needed.. if not worse, the problem priyana told you about earlier. On how restoring from an overcome back up may give you force closes on apps.
yappoe said:
Probably more like factory reset wipe needed.. if not worse, the problem priyana told you about earlier. On how restoring from an overcome back up may give you force closes on apps.
Click to expand...
Click to collapse
Yeah.. Thanks! That was the problem! I did a clean install, and its all working again. Lol that's strange, what's the point taking a NANDroid then?
Sent from my GT-P1000 using xda premium
It was funny that not many people mentioned it in Overcome.
I think it is the CWM in Overcome Kernel that is the problem.
You can try RedPill 2.0.1 kernel.
In my experience the battery drain was better than Overcome, it works with Overcome ROM.
But I think it could be the nandroid backup that is the issue, meaning Redpill recovery likely won't help with backup that was taken using Overcome recovery.
priyana said:
It was funny that not many people mentioned it in Overcome.
I think it is the CWM in Overcome Kernel that is the problem.
You can try RedPill 2.0.1 kernel.
In my experience the battery drain was better than Overcome, it works with Overcome ROM.
But I think it could be the nandroid backup that is the issue, meaning Redpill recovery likely won't help with backup that was taken using Overcome recovery.
Click to expand...
Click to collapse
When I was a Overcome rom/kernel user I never experienced any issues with nandroid backup/restore.
Oh what the hell
I did a fresh install of Overcome yesterday. Worked fine.
Switched the tab on this mormig, and I got all the FC messages again, and WiFi won't turn on!!
What the hell is wrong????
What can I do?
I flashed the nowipe version.
Sent from my HTC Desire S using xda premium
Hey guys. I was using the Stock firmware 2.3.4 so i thought of spicing things up. I installed PA for SU-660 (mine is the SU-660).
It flashed successfully but it had some bugs
Anyway I did a NANDROID BACKUP which I had made. It restores completely but it doesn't boots up. Brings me the LG Logo (with the PITCH BLACK BACKGROUND) and then turns off and back at it again infinitely!!!!!!!!!!!!!
What did I do wrong?
I wiped the Data/Cache/Dalvik Cache etc before and after doing the backup
Please tell me a fix for this. Thank You!
AW: [Q] BOOTLOOP on Nandroid Backup. Prev. on PA CM9
WasifSal said:
Hey guys. I was using the Stock firmware 2.3.4 so i thought of spicing things up. I installed PA for SU-660 (mine is the SU-660).
It flashed successfully but it had some bugs
Anyway I did a NANDROID BACKUP which I had made. It restores completely but it doesn't boots up. Brings me the LG Logo (with the PITCH BLACK BACKGROUND) and then turns off and back at it again infinitely!!!!!!!!!!!!!
What did I do wrong?
I wiped the Data/Cache/Dalvik Cache etc before and after doing the backup
Please tell me a fix for this. Thank You!
Click to expand...
Click to collapse
Well wiping after the backup restore should **** up the whole thing. Restore but than just reboot
Sent from my LG-P990 using xda premium
Darkmind82 said:
Well wiping after the backup restore should **** up the whole thing. Restore but than just reboot
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I tried that too.. :/
No luck :|
AW: [Q] BOOTLOOP on Nandroid Backup. Prev. on PA CM9
WasifSal said:
I tried that too.. :/
No luck :|
Click to expand...
Click to collapse
Than the nandroid is broken... just start completely new there Buddy. Hip you used titanium too
Sent from my LG-P990 using xda premium
Darkmind82 said:
Than the nandroid is broken... just start completely new there Buddy. Hip you used titanium too
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I don't think the NanDroid Backup is broken. As I have restored my data like 2 or 3 times from that same file and the other 1 time before (I have 2 backups).
I think the problem is with the "Downgrading" procedure. Its strange as I have looked around I haven't seen any case like that...
Btw I can reflash the PA ROM for SU660 though. And I think I can flash between the ICS ROMs.
So a Simple Solution at this point will be:- Do u know any STABLE ICS Custom ROM for the SU660?
Thanks
Want to revert back to STOCK! XDA! please help
WasifSal said:
Want to revert back to STOCK! XDA! please help
Click to expand...
Click to collapse
try and post in the SU660 thread.....you might get an answer from there....this is P990 and not many know (including me ) how to visualize a P990 from a SU660....
SREEPRAJAY said:
try and post in the SU660 thread.....you might get an answer from there....this is P990 and not many know (including me ) how to visualize a P990 from a SU660....
Click to expand...
Click to collapse
There's only one Q&A Thread i.e 2X Only!
Hey guys my Lg optimus Black p970 dont indicating the charging indiactor when i keep charging..... and also it dont not connecting to my lappy :banghead::banghead:
I have tried with other two Roms but same problem exits
Any solution..... i am on Marvel Rom v10
Thanks:thumbup::thumbup::thumbup:
raghavafitt said:
Hey guys my Lg optimus Black p970 dont indicating the charging indiactor when i keep charging..... and also it dont not connecting to my lappy :banghead::banghead:
I have tried with other two Roms but same problem exits
Any solution..... i am on Marvel Rom v10
Thanks:thumbup::thumbup::thumbup:
Click to expand...
Click to collapse
So you can't see the charging animation... but it is charging or not?
Yeah very weird. Happened to me too.
Solved it by itself when I did a nandroid backup, then did wipes and flashed another rom. Then I came back to the nandroid and the problem was gone.
Flash another ROM but wipe Data,Cache,Dalvik Cache and System.Basically a FULL Wipe.Be careful after wiping System do not reboot if you have not flash a ROM.If not you will brick.Report after trying
Sent from my LG-P970 using Tapatalk 4 Beta
GPaul said:
So you can't see the charging animation... but it is charging or not?
Click to expand...
Click to collapse
it charges....
BlackPie said:
Flash another ROM but wipe Data,Cache,Dalvik Cache and System.Basically a FULL Wipe.Be careful after wiping System do not reboot if you have not flash a ROM.If not you will brick.Report after trying
Sent from my LG-P970 using Tapatalk 4 Beta
Click to expand...
Click to collapse
everytime i will flash the rom with Doing all wipes:thumbup::thumbup:
raghavafitt said:
everytime i will flash the rom with Doing all wipes:thumbup::thumbup:
Click to expand...
Click to collapse
Then try smartflashtool back to a stock gingerbread Rom then flash whatever Rom you would like
This seems to be hardware issue. Try this: do some heavy gaming do the bavk of the phone gets hot then connect to charger and you will get charging animation. Also when connected to PC connection brakes and reconnects by itself, and sometimes it does not report usb connection at all right?
I had same issue and it seems to be gone...
Please report if thi works.
Cheers
Sent from my LG-P970 using xda app-developers app
raghavafitt said:
everytime i will flash the rom with Doing all wipes:thumbup::thumbup:
Click to expand...
Click to collapse
Make a nandroid, do a factory reset from hidden menu, reboot to recovery again, restore your backup and tadaaa it's working at least it worked for me
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
Make a nandroid, do a factory reset from hidden menu, reboot to recovery again, restore your backup and tadaaa it's working at least it worked for me
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Thanks nooby will try and report you back:thumbup::thumbup:
Armin61 said:
This seems to be hardware issue. Try this: do some heavy gaming do the bavk of the phone gets hot then connect to charger and you will get charging animation. Also when connected to PC connection brakes and reconnects by itself, and sometimes it does not report usb connection at all right?
I had same issue and it seems to be gone...
Please report if thi works.
Cheers
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Ya will try and report here:thumbup::thumbup::thumbup:
Song Epic... laralala!!!! xdd
Flash other baseband.. in the rom izs and baseband of huexxx, the basenband is bad.. With other baseband of 30x.. for example.. full working really man!! and sorry fror my english... im latino xdd :silly:
I have on my phone the ICS bootlooad unlocked and partition that i made with the all in one toolkit.
I perform a full wipe and after install the rom, but for all the three time i install i have always that the phone is unusable.
All the process died and I can't use anythins.
My installation option is the kernel of 32M and all S3 layout.
I have to use double size partition?
Ok.. so what is the error you are getting? Which recovery version and did you create the system size yourself. Or the default one?
Sent from my LG-P990 using xda premium
I have cwm 6.0.25 and use the default partition structure.
What happens is that touchwiz crash and also android.phone is always crash and the device is unusable.
I will try with the default kernel this evening.
vot4anto said:
I have cwm 6.0.25 and use the default partition structure.
What happens is that touchwiz crash and also android.phone is always crash and the device is unusable.
I will try with the default kernel this evening.
Click to expand...
Click to collapse
Ok.. but its a very unusual problem.. Try using TWRP TWRP and try.. try with only one kernel in the AROMA.. dont select anyhing else..
Sent from my LG-P990 using xda premium
Nothing change, now i select only gmail and youtube hd as app and nothing else and kernel stock.
At the first boot I have the error (always the same)
Application Manager (process com.lge.appbox.client) has stopped unexpectly, please try again
And after other application crash (touchwiz, phone etc....)
vot4anto said:
Nothing change, now i select only gmail and youtube hd as app and nothing else and kernel stock.
At the first boot I have the error (always the same)
Application Manager (process com.lge.appbox.client) has stopped unexpectly, please try again
And after other application crash (touchwiz, phone etc....)
Click to expand...
Click to collapse
Hmm i see.. now do one thing, first install Tonyp's new BL ROM.. let it boot. Then wipe everything and install the Thrust..
Sent from my GT-N7100 using XDA developers app
Jishnu Sur said:
Hmm i see.. now do one thing, first install Tonyp's new BL ROM.. let it boot. Then wipe everything and install the Thrust..
Sent from my GT-N7100 using XDA developers app
Click to expand...
Click to collapse
OK. I can try this evening, let you know
Jishnu Sur said:
Hmm i see.. now do one thing, first install Tonyp's new BL ROM.. let it boot. Then wipe everything and install the Thrust..
Sent from my GT-N7100 using XDA developers app
Click to expand...
Click to collapse
About Aroma option? What I have to select?
Jishnu Sur said:
Hmm i see.. now do one thing, first install Tonyp's new BL ROM.. let it boot. Then wipe everything and install the Thrust..
Sent from my GT-N7100 using XDA developers app
Click to expand...
Click to collapse
I see that there is a new Jelly Cream for P990 but the download link is the same for Opti-Thrust, can i try this new one or the two release are the same?