[Q] How to Revert to Stock XXLSZ - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi,
I am using CM10.1 on my Galaxy Note and would like to revert back to Stock Rom XXLSZ.
I have downloaded the XXLSZ Stock rom package from Dr.Ketan's Thread.
What are the steps to revert back to stock rom from cm10.1.
Thanks in advance.

boot into recovery and wipe data.
boot into download mode and use pc odin the flash the rom

nokiamodeln91 said:
boot into recovery and wipe data.
boot into download mode and use pc odin the flash the rom
Click to expand...
Click to collapse
do i need to do all the three wipes?

Yes recommended

Related

go back in gingerbread

Hello everybody, My galaxy note running on MUIU Ice cream sandwish with a dangerous kernel and i want to go back on stock official gingerbread and I wondering if i can flash a stock rom via odin and if it's was dangerous for the phone , because i don't want to use the kernel abysal method.
Thank in advance
Goldiman
Well the odin way, is the safest way in my opinion.
Flash a safe kernell and then Flash the gb rom you wish via odin.
Search in the forums and you will find the exact safe steps
Sent from my GT-N7000 using Tapatalk 2
loumaros said:
Well the odin way, is the safest way in my opinion.
Flash a safe kernell and then Flash the gb rom you wish via odin.
Search in the forums and you will find the exact safe steps
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
thank for your anwser
I wondering why flash a safe kernel before?
I can just flash the full stock rom via odin on a dangerous kernel right?
Straigh way flash any stock GB ROM with PC Odin.
Very likely you will face force closes after flashing GB stock ROM, nothing to worry, just reboot to recovery and wipe cache and data, everything will be fine. Remember wiping should only perform on GB ROM.
So thank you very much everybody
so i flash the rom via odin , so the flash pass, aftert i get a bootloop on samsung logo so i shutdown my device, and
press home and power button and volume up and select wipe data and wipe cache
reboot the device and everythings is fine
dr.ketan said:
Straigh way flash any stock GB ROM with PC Odin.
Very likely you will face force closes after flashing GB stock ROM, nothing to worry, just reboot to recovery and wipe cache and data, everything will be fine. Remember wiping should only perform on GB ROM.
Click to expand...
Click to collapse
Dr.ketan, can we say this steps valid to any room ?
subrban said:
Dr.ketan, can we say this steps valid to any room ?
Click to expand...
Click to collapse
As long as you flash with odin, no need to flash safe kernel as odin does not uses recovery, but it is not advised to flash stock ICS as you may have to wipe immediately after flash. And wiping on stock ics can brick your Note.
jeetu1981 said:
As long as you flash with odin, no need to flash safe kernel as odin does not uses recovery, but it is not advised to flash stock ICS as you may have to wipe immediately after flash. And wiping on stock ics can brick your Note.
Click to expand...
Click to collapse
ٍSorry bro, could you explane this more ( but it is not advised to flash stock ICS as you may have to wipe immediately after flash )? and why did you mentioned ICS specially?
subrban said:
ٍSorry bro, could you explane this more ( but it is not advised to flash stock ICS as you may have to wipe immediately after flash )? and why did you mentioned ICS specially?
Click to expand...
Click to collapse
Most of the times we may have to wipe in stock recovery after flashing stock rom using odin (specially if flashing over custom roms or flashing GB over ICS), and we all know that Samsung ICS kernels are not safe to wipe, it may brick your device if you have to wipe in ICS stock recovery.
Best is to first flash GB, wipe and then flash ICS using odin.
jeetu1981 said:
Most of the times we may have to wipe in stock recovery after flashing stock rom using odin (specially if flashing over custom roms or flashing GB over ICS), and we all know that Samsung ICS kernels are not safe to wipe, it may brick your device if you have to wipe in ICS stock recovery.
Best is to first flash GB, wipe and then flash ICS using odin.
Click to expand...
Click to collapse
if there is special steps to flash rooms please tell me where i could find it
subrban said:
if there is special steps to flash rooms please tell me where i could find it
Click to expand...
Click to collapse
Here it is,by dr ketan
http://forum.xda-developers.com/showthread.php?t=1424997

[Q] Reverting to Stock ROM

HI guys, I've just sold my Note (I know, I know) and want to revert to stock ICS before sending. I've got CWM with a custom ROM. I think I read somewhere that all I need to do to revert to Stock is flash a Stock ROM?
Is that it? Will this wipe CWM etc? Anyone have a guide I could follow please?
Download the stock rom from samfirmware.com and install it using pc odin.
I recommend installing a GB rom and the reboot into recovery and do a factory reset.
connect to pc and format usb storage.
nokiamodeln91 said:
Download the stock rom from samfirmware.com and install it using pc odin.
I recommend installing a GB rom and the reboot into recovery and do a factory reset.
connect to pc and format usb storage.
Click to expand...
Click to collapse
Cheers mate, any reason to go GB rather than ICS? If I revert back to GB could I then update to ICS via OTA?
reason is its safe to do a factory reset in GB and not safe in ICS. to do a factory reset in ICS, u will need to install a diff kernel
yes kies or OTA will be applicable.
nokiamodeln91 said:
reason is its safe to do a factory reset in GB and not safe in ICS. to do a factory reset in ICS, u will need to install a diff kernel
yes kies or OTA will be applicable.
Click to expand...
Click to collapse
Awesome, I am running Hydracore, which I thought was ok, doesn't matter better to be safe then sorry. Thanks again
Hydracore is a safe kernel and you can flash a stock rom
But it think its not required to be on a sfe kernel when you are about to flash a stock rom through pc odin

universal kernel

iam now on jb rom rr version and i want to go back to gb.if i flashed the new hydra version 7 is it safe to go back?
idoguy said:
iam now on jb rom rr version and i want to go back to gb.if i flashed the new hydra version 7 is it safe to go back?
Click to expand...
Click to collapse
Yes..Hydracore is safe..you can also flash abyss kernel..
thanks
the phone won't boot if u install hydracore. why do you want to flash a kernel? to go to stock you need to use pc odin.
whay?hydra is a safe kernel am i right?and i want to return to gb and from there to flash a stock ics
idoguy said:
whay?hydra is a safe kernel am i right?and i want to return to gb and from there to flash a stock ics
Click to expand...
Click to collapse
Rocketrom comes with philz kernel and it is brickfree..So you can directly flash gb rom using pc odin
Hydracore doesnt work with leaked jb roms
when using pc odin, it doesn't require you to be on a safe kernel
its possible to returen to ics stock from jb? i looked and the guide says that you have to be on gb and from there flash ics
pc odin can flash stock rom on the phone no matter what rom you are on.
are you sure?the guide says the you have to be on gb first,so just to put the tar file in pda?
?
idoguy said:
are you sure?the guide says the you have to be on gb first,so just to put the tar file in pda?
?
Click to expand...
Click to collapse
You can flash ics directly from jb..but i guess you will get a bootloop
You can flash a safe kernel,then do a factory reset and it boots up successfully
iam confused ...so now flash the hydra 7 do wipe data and flash from odin?
idoguy said:
iam confused ...so now flash the hydra 7 do wipe data and flash from odin?
Click to expand...
Click to collapse
Use PC Odin to flash stock ICS directly. No intermediate steps, like flashing a custom kernel or going back to GB, are needed.
Sent from Nexus 7
chasmodo said:
Use PC Odin to flash stock ICS directly. No intermediate steps, like flashing a custom kernel or going back to GB, are needed.
Sent from Nexus 7
Click to expand...
Click to collapse
I guess he gets a bootloop after he flash ics..and he need to flash a safe kernel to do wipes..isnt it??
May be, but that's a step after flashing ics. I don't know why op wants to flash hydracore before using pc odin
too many ideas.i afraid to try it.
there are not many ideas.
All comes to one. Don't confuse yourself
put phone in download mode
connect to pc
open odin and select the rom file in the pda tab
flash
once done, don't do any wipes till you install a safe kernel

[Q] My G-note got crashed, please help me...

My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping.. i dont know if xxls2 kernel is brick free or not. but stucking at samsung logo has always been solved by fullwipe factory in my case
mistajoe83 said:
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping..
Click to expand...
Click to collapse
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
that is correct. takes times. but if you waited more than 10 minutes try flashing other rom.. safest method is pc odin.
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
musheercmr said:
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
Click to expand...
Click to collapse
tell us how you flash it. via PC ODIN or ClockWorkMOD.?
as for the kernel if you have Extrnal sdcard then download SpeedMod 3-15 or Hydracore kernel than put that in your external Sdcard. Open CMW than flash the kernel then go to advance>reboot recovery.. wait for recovery rebooted than you are safe to flash other rom.
---------- Post added at 07:28 AM ---------- Previous post was at 07:20 AM ----------
look here.. theres a tutorial of flashing with PC ODIN + Firmware download..
the instruction is detailed and clear.. this should help you the most.
http://forum.xda-developers.com/showthread.php?t=1424997
musheercmr said:
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
Click to expand...
Click to collapse
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
rajsekhar.300 said:
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
Click to expand...
Click to collapse
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
musheercmr said:
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
Click to expand...
Click to collapse
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
rajsekhar.300 said:
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
Click to expand...
Click to collapse
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
look here for tutorial
http://forum.xda-developers.com/showthread.php?t=1329360
mistajoe83 said:
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
Click to expand...
Click to collapse
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
musheercmr said:
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
Click to expand...
Click to collapse
From where did you download the rom..it it was downloaded from sammobile or from that hotfile link,then you should flash it through pc odin
And if its a custom rom that you downloaded from the xda,then it should be flashed through cwm
the Sam mobile and the hot link are the same. youncan flash the rom using pc odin. but before that put the philz kernel xxls2 in the external sd. so that after the flash using odin, you can boot into recovery and flash that kernel and be safe and do the wipe.
nokiamodeln91 said:
the Sam mobile and the hot link are the same..
Click to expand...
Click to collapse
Yes i know..i said that just to make it clear for the op
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
musheercmr said:
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
Click to expand...
Click to collapse
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
[email protected]$3K#@R said:
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
Click to expand...
Click to collapse
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
musheercmr said:
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
Click to expand...
Click to collapse
What was the error you got in the pc odin
paste the odin logs that show failed

Downgrade from JB to ICS

I want to downgrade my Galaxy note from leaked 4.1.2 back to stock ICS. What preparation I should do flash stock ICS rom?
ReiZona said:
I want to downgrade my Galaxy note from leaked 4.1.2 back to stock ICS. What preparation I should do flash stock ICS rom?
Click to expand...
Click to collapse
What kernel do you have? by the way there is official JB now
You can use PC odin to install ICS stock.. but will beed wipes before that so make sure you have safe kernel ..
I have philz kernel. So can i just flash stock ICS rom over jb rom?
if you have philz kernel.. first boot into recovery and .. then Philz settings > clean before new rom install...
once done.. choose advanced and reboot download
this will put the phone in download mode.. connect to pc and flash rom using odin
Ok thanks i will try
Ok.. by the way there is official JB now.. why you going to ICS?
Maybe I'm or i just I don't know something but you say I can just flash official firmware over leaked version yes?
yes. but its recommended to perform wipes

Categories

Resources