Related
I have successfully ported ClockworkMod for Galaxy Ace.
Almost everything is working, including flashing boot and recovery images and full backup and restore.
TO-DO List:
Build flashable zip for Froyo.
Fix power-off (as it does a full power off, until you keep pressed power button, then it gets back to recovery).
Try to make a unified version for Froyo and Gingerbread basebands.
Get official support (already notified Koush).
Changelog:
Alpha
Initial release
Beta
Custom kernel with ext4 support (for Froyo and Gingerbread versions).
USB Mass Storage Mode fixed (need's testing on Gingerbread).
All Ace versions should work (using proper build).
Gamma
Fixed reboot out of recovery.
Reverted to 3.x version of CWM, as 4.x is being actively developed (breaking things).
Flashing method:
Flashable zips (currently only for Gingerbread):
Flash attached ClockworkMod-ginger-gamma-signed.zip from any recovery (stock or CWM).
ODIN (alternative method, currently only method for Froyo):
Flash attached recovery_gamma_[your version].tar from ODIN. Put Cooper.ods in proper field, and recovery in PDA field. Leave other fields blank and ignore both errors.
Please port it to the latest 2.3.4 and the european froyo version.
Thanks
Sent from my GT-S5830 using XDA App
manju991 said:
Please port it to the latest 2.3.4 and the european froyo version.
Click to expand...
Click to collapse
Already in my TO-DO list.
Cool... Thanks mate..
Sent from my GT-S5830 using XDA App
you have to fixing framebuffer issue?
Sent from my ViewPad7 using XDA App
digkong said:
Dude why don't u work with the other two developer working on CWM...the work will be lot faster and lot more stable..
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
+1.... Instead of working separately and trying to port CWM, if you, dee000000 and PabloPL collaborate then the work would complete faster and due to the combined effort i am sure that it would be better and also save time and effort of all 3 of you.
ilarrain said:
I have successfully ported ClockworkMod for the american version of Galaxy Ace, running Froyo build of Samsung stock firmware.
Almost everything is working, including flashing boot and recovery images and full backup and restore.
Functions not working:
Formatting partitions.
Reboot recovery (you'll probably end in a boot loop, booting recovery everytime, until you flash an stock recovery in ODIN).
Enabling USB-Mass-Storage mode
Changes pending:
Build for GT-S5830 (european Ace).
Add EXT4 support (custom kernel or module loading).
Build flashable zip.
Code cleanup.
Publish full sources.
Fix boot loop (should send recovery-done to the bootloader).
Tomorrow I will continue development.
Recovery image (for GT-S5830L) attached in a tar (you can flash in ODIN if you like).
Please consider buying me a beer with the donate button on the left side, under my name.
Click to expand...
Click to collapse
Hi, great work. Could you share fix for graphics bug? How did you tested nandroid backup of boot/recovery? (could you test it on my CMW?).
If you want, i can send you what changes i've made, so then we would have fully working recovery for Ace.
Strange, USB Mass Storage mode is working for me (in my recovery). Didn't had to do any changes to make it working.
Edit 1:
I've fixed reboot problem.
PabloPL said:
Hi, great work. Could you share fix for graphics bug? How did you tested nandroid backup of boot/recovery? (could you test it on my CMW?).
If you want, i can send you what changes i've made, so then we would have fully working recovery for Ace.
Strange, USB Mass Storage mode is working for me (in my recovery). Didn't had to do any changes to make it working.
Click to expand...
Click to collapse
also strange on framebuffer. my changes on graphics.c is working good for galaxy mini.
i see in the first post the clockworkmod background is not shown in ace.
Sent from my ViewPad7 using XDA App
tj_style said:
also strange on framebuffer. my changes on graphics.c is working good for galaxy mini.
i see in the first post the clockworkmod background is not shown in ace.
Sent from my ViewPad7 using XDA App
Click to expand...
Click to collapse
THE background is working OK. I've used your fix, but I had to force 24bpp mode.
I will share my sources when I arrive home later today.
PabloPL: great! As soon as I share my sources, we can collaborate to get it working for all ace version ASAP.
ilarrain said:
THE background is working OK. I've used your fix, but I had to force 24bpp mode.
I will share my sources when I arrive home later today.
PabloPL: great! As soon as I share my sources, we can collaborate to get it working for all ace version ASAP.
Click to expand...
Click to collapse
using my fix on github?
will be more progress if you collaborating too on porting recovery for our device.
backup & restore seems okay, but i've bricked my galaxy mini when flashing rom via update.zip. i think it's because write_raw_image("/tmp/boot.img", "boot"), command in update script.
are you have to testing flash update.zip on your recovery?
tj_style said:
using my fix on github?
will be more progress if you collaborating too on porting recovery for our device.
backup & restore seems okay, but i've bricked my galaxy mini when flashing rom via update.zip. i think it's because write_raw_image("/tmp/boot.img", "boot"), command in update script.
are you have to testing flash update.zip on your recovery?
Click to expand...
Click to collapse
I've tested backup+restore. I've also tested "flash_image recovery recovery.img". Doing it from a zip shouldn't be so different.
Sharing my sources is on my original todo list since the beginning, I've just didn't have enough time.
Sources will be in http://github.com/ilarrain.
I think the fix for ace's bml flashing is already there.
Sent from my GT-S5830L using XDA App
ilarrain said:
I've tested backup+restore. I've also tested "flash_image recovery recovery.img". Doing it from a zip shouldn't be so different.
Sharing my sources is on my original todo list since the beginning, I've just didn't have enough time.
Sources will be in http://github.com/ilarrain.
I think the fix for ace's bml flashing is already there.
Sent from my GT-S5830L using XDA App
Click to expand...
Click to collapse
okay, great..
we will discusing again tomorrow, I must sleep now.
btw, maybe better to converting rfs to ext4, for module, we can use from i9000 source.
also, better to merge your changes and PabloPL changes with ifdef, it will more easy when updating from cyanogenmod source.
you want to collaborate in my repo? i will add you and other collaborator to the project.
ilarrain said:
I've tested backup+restore. I've also tested "flash_image recovery recovery.img". Doing it from a zip shouldn't be so different.
Sharing my sources is on my original todo list since the beginning, I've just didn't have enough time.
Sources will be in http://github.com/ilarrain.
I think the fix for ace's bml flashing is already there.
Sent from my GT-S5830L using XDA App
Click to expand...
Click to collapse
Looked at your changes and they looks like the same as mine, so nandroid backup for boot/recovery should also work in my sources.
Now the only think is to fix reboot loop (i thought that i've fixed it - tested with fakeflash recovery, but after flashing it wouldn't worked:/). Will look at it tomorrow.
looks cool o tried it on my froyo with europe firm work great..
but like u just said once u go in recovery you will never go out
nice work.
10x
Full sources published, look first page.
izador said:
looks cool o tried it on my froyo with europe firm work great..
but like u just said once u go in recovery you will never go out
nice work.
10x
Click to expand...
Click to collapse
Great!!! So we need less versions to mantain: froyo and gingerbread, no matter the ace version.
i also create a backup for recovery.img using yours tar for froyo, if some one needs it
after he tried to flash the recovery and have bootloop.
http://17cb3171.yyv.co
*its only for froyo
izador said:
i also create a backup for recovery.img using yours tar for froyo, if some one needs it
after he tried to flash the recovery and have bootloop.
http://17cb3171.yyv.co
*its only for froyo
Click to expand...
Click to collapse
If you have bootlop in recovery, just reboot (while in adb shell)
Code:
reboot recovery_done
excited for this..
good work guys..
After extracting CF-Root's zImage, I have found inside killrecovery.sh:
Code:
..
rm /cache/recovery/command
rm /cache/update.zip
touch /tmp/.ignorebootmessage
..
I hope this information useful for developer.
Sent from my GT-S5830 using XDA App
if i create backup with yours CW can i use it ?
it will work ?
did some one try it ?
partition us working good.
i tried to crate partition with CW, work good.
Disclaimer: By downloading and flashing/installing any of my files on your device, I am not responsible for any damage done to your phone and/or anything else that dissatisfies you. Proceed only if you're aware of what you're doing!
Uploading my files elsewhere (mirroring) is not appreciated. If you need to add my files elsewhere, just post the link to my goo.im account.
* Key layout:
Select: power button ( as of 05/05/2013 build 3 - also home button can be used )
Up/Down: volume up/volume down buttons
Back: back button
* How to flash:
Flash via odin3 in PDA column or with CWM recovery (only latest builds)
* Where to download:
Click here!
20/07/2013
* Fixed font issue
* Updated to support encryption (you need to format /data with this recovery to enable it)
23/11/2013
* updated to version 6.0.4.5
* use RGBX 8888 format
* Fixed backup/restore of .android_secure
* Support for Android 4.4
Special thanks to FrOz3n for helping me with testing initial builds!
XDA:DevDB Information
ClockWorkMod 6.0.x for Samsung Galaxy Mini 2, a Tool/Utility for the Samsung Galaxy Mini
Contributors
TheWhisp, CWM team
Version Information
Status: Stable
Current Stable Version: 6.0.3.3-b2
Stable Release Date: 2013-07-20
Current Beta Version: 6.0.4.5
Beta Release Date: 2013-11-23
Created 2013-10-11
Last Updated 2013-11-23
TheWhisp said:
Disclaimer: By downloading and flashing/installing any of my files on your device, I am not responsible for any damage done to your phone and/or anything else that dissatisfies you. Proceed only if you're aware of what you're doing!
Uploading my files elsewhere (mirroring) is not appreciated. If you need to add my files elsewhere, just post the link to my goo.im account.
* Progress:
Almost everything works, it needs some minor changes. Release very soon.
* Notice:
Key layout is a little different than in CWM5, so don't freak out.
* How to flash:
Flash via odin v1.85 in PDA column.
Special thanks to FrOz3n for helping me with testing!
Click to expand...
Click to collapse
All of the thanks goes to you, our beloved developer
Re: [DEV] ClockWorkMod 6 - coming soon
thanks for you two
keep it up
Sent from my GT-S6500D using xda premium
What benefif from cwm6
Google CWM6 changelog.. mostly super fast backup/restore
TheWhisp said:
Google CWM6 changelog.. mostly super fast backup/restore
Click to expand...
Click to collapse
And faster installing ROM, I've flashed CM10 in hmmm 20 sec ?! idk but faster than with CWM5. And it let you install zip via ADB(still untested) I'm going to test it now.
PS>
The recovery builder is now building version 6 of the recovery. The main changes are as follows:
Backups are much faster. 4-5x faster. (Bug fix due to excessive status updates of the UI and new backup technique)
Incremental backups are smaller. Way way smaller. Only 15-20MB each for each additional backup of a ROM. This is done using a new tool I wrote to dedupe the files between incremental backups to eliminate duplicates.
Read more at http://techie-buzz.com/android/cwm-...ler-nandroid-backups.html#6K7Mss6UKbjEK3lO.99
Click to expand...
Click to collapse
Re: [DEV] ClockWorkMod 6 - coming soon
awesome
Sent from my GT-S6500D using xda premium
Ynt: [DEV] ClockWorkMod 6 - coming soon
Thats good. Especially taking nandroid backups are taking ages to complete or restore.. thanks for everything.
GT-S6500 cihazımdan Tapatalk 2 ile gönderildi
Sweet and useful info for all Mini2 users
EDIT: TheWhisp should this CWM be touch or classic version?
Sent from my ZTE Blade III.
midzan21 said:
Sweet and useful info for all Mini2 users
EDIT: TheWhisp should this CWM be touch or classic version?
Sent from my ZTE Blade III.
Click to expand...
Click to collapse
Why touch !? In my opinion that would bring you only fail menu touches so its a no from me for the touch verzion..
Re: [DEV] ClockWorkMod 6.0.2.8 - coming soon
Wow good job i can't wait to try it. Is the recovery loop exist?
Sorry for my bad english
rianrazan said:
Wow good job i can't wait to try it. Is the recovery loop exist?
Sorry for my bad english
Click to expand...
Click to collapse
Haven't run into it yet.
For the installation over sideload, I confirm IT WORKS. Thank you TheWhisp
You just setup the android SDK, install ADB tools, download your favourite ROM (currently mine is CM10 xD) and install it over ADB.
What does Install update via sideload do?!
You don't have to put your rom or flashing .zip file in your phone or SD card.
If you have it in your downloads folder (in linux) you just connect your phone to sideload on CWM6 and write in terminal (on your PC)
"adb sideload <.zip_file_path>" and you have it
Example. You have update.zip file in your downloads folder, so you write
adb sideload ~/Downloads/update.zip
So yah, i tried it, and as I said, it works falwlessly
PS. There are like NO bugs so I think this is going to be released tomorrow or so. Let's see what TheWhisp thinks
Re: [DEV] ClockWorkMod 6.0.2.8 - coming soon
Will it be compatible with existing flashable zip files? The whisp has been working hard for s6500. Thanks.
Sent from s6500d with custom ROM and kernel.
bhree said:
Will it be compatible with existing flashable zip files? The whisp has been working hard for s6500. Thanks.
Sent from s6500d with custom ROM and kernel.
Click to expand...
Click to collapse
It's compatible with all .zip files I have tried yet. It doesn't matter which zip file you try, it should work as long as the zip file worked in the previous CWM5.
cant wait for it...now its free from cwm loop .
Great news!!!! I'm very happy! Fast backup and fast restore!!! Ohh yeah! Thanks Whisp!
our beloved dev thewhisp really makes the Galaxy Mini 2 alive..
CM10+CWM really good.
and again... Ace Plus users ask me for help, I fix their kernel, they use my Mini 2 config, rename every jena to trebon and can't include me in the credits. Hate people like that. :/
TheWhisp said:
and again... Ace Plus users ask me for help, I fix their kernel, they use my Mini 2 config, rename every jena to trebon and can't include me in the credits. Hate people like that. :/
Click to expand...
Click to collapse
don't ever help 'em anymore sir
people like 'em never learned a lesson ..
It kind of feels sad when you do something in your free time and someone just takes your work and say it's his. Anyway, release in an hour.
I polished this for the xt907. It should work as is on the unlocked mb866. I have used Photon Q recovery & Rom Manager since I learned it was the first usable recovery for the Atrix HD.
Be sure to back up as it is untested on a mb866.
Adds initd support & SD swap. All storage defaults to storage0 (your real SD card) which is the way it should have been from Motorola, well closer anyway.
This internal SD ("data/media") memory now has no purpose. You can move what you want to your real SD & delete everything else to let the phone use it all.
UpDate I did not Know that TWRP 263 fails where Philz v6 succeeds.
Just go here to get Philz v6 & swap v3 :
http://forum.xda-developers.com/showthread.php?p=48398998#post48398998
Download zip & flash with Philz v6, Wipe dalvik & cache only
Oh & let me know if it works or not?
Old thread with similar mod.
aviwdoowks said:
I polished this for the xt907. It should work as is on the unlocked mb866. I have used Photon Q recovery & Rom Manager since I learned it was the first usable recovery for the Atrix HD.
Be sure to back up as it is untested on a mb866.
My Thread for instructions on the odexed (good for deodexed roms too) version.
Odexed ver is for any rom as there is no UI or Framework mod. Just the initd & scripts
There is a problem with attachments today so go to the above link and it from there.
See attachments NOT WORKING
Here is the direct link:
https://mega.co.nz/#!tBhAmIYS!NKAob5kjKsk0--28a0IWAsLukz6BR5wKYy1fjRskZKc
md5: 2ee7f410551fbb62a5d0375a9b0f26c2
Download zip & follow instructions at above link.
Please DL from this post rather than the XT907.
Oh & let me know if it works.
Old thread with similar mod.
Click to expand...
Click to collapse
I'm not exactly sure what this mod does, even looking the other thread... Can you provide a description, please? Thanks!
mauchito said:
I'm not exactly sure what this mod does, even looking the other thread... Can you provide a description, please? Thanks!
Click to expand...
Click to collapse
Adds initd support & SD swap. All storage defaults to storage0 (your real SD card) which is the way it should have been from Motorola, well closer anyway.
I have revised my SD swap method. Now you can flash this to any stock rom as you like. Wipe dalvik & cache only. Good for SafeStrap roms too. Not for cm based, multuser, or anything but 4.1.2 stock roms!
This internal SD ("data/media") memory now has no purpose. You can move what you want to your real SD & delete everything else to let the phone use it all. All storage defaults to storage0 (your real SD card) which now is the way it should have been from Motorola, well closer anyway.
Always use Plilz v6 as it works as well as TWRP 263.
Always choose any NO when rebooting from CWMR.
Known issues:
Two things will Kill the SD swap: (by messing with install-recovery.sh)
1)Using TWRP older then v2.6 Or cwmr other than Philz v6.
2)If you boot from CWMR and choose yes to "disable recovery flash".
Also) If you mess with multiuser roms feel free to delete 0 , obb & legacy folders in internal sd (storage1).
One more) It is expected for your settings-storage info to be out of whack.
Finally) Create folder in root of the phone with Root Explorer results in an error but is the same as the Rabbit's version & of no consequence. The folder does get created anyway. All else works in the root of the phone.
Does that help?
Very good option for the stock lovers.
Thanks for sharing
SVLAN said:
Very good option for the stock lovers.
Thanks for sharing
Click to expand...
Click to collapse
To everyone:
Is it working? I do not have an Atrix HD. Please give some feedback.
v3 up. No twrp allowed.
aviwdoowks said:
v3 up. No twrp allowed.
Click to expand...
Click to collapse
If I did not already have an SD Swap already running,(I am on Holoblur with his sd swap) I would test this out. Do you think there is a chance for this to work on cm 11?
PeteSeiler2010 said:
If I did not already have an SD Swap already running,(I am on Holoblur with his sd swap) I would test this out. Do you think there is a chance for this to work on cm 11?
Click to expand...
Click to collapse
No way.
Is your separate?
It appears it is.
Sent from my Atrix HD using XDA Premium 4 mobile app
V4 up. Much improved.
aviwdoowks said:
I polished this for the xt907. It should work as is on the unlocked mb866. I have used Photon Q recovery & Rom Manager since I learned it was the first usable recovery for the Atrix HD.
Be sure to back up as it is untested on a mb866.
Adds initd support & SD swap. All storage defaults to storage0 (your real SD card) which is the way it should have been from Motorola, well closer anyway.
This internal SD ("data/media") memory now has no purpose. You can move what you want to your real SD & delete everything else to let the phone use it all.
UpDate I did not Know that TWRP 263 fails where Philz v6 succeeds.
Just go here to get Philz v6 & swap v3 :
http://forum.xda-developers.com/showthread.php?p=48398998#post48398998
Download zip & flash with Philz v6, Wipe dalvik & cache only
Oh & let me know if it works or not?
Old thread with similar mod.
Click to expand...
Click to collapse
Is there anyway to make this work for 4.2.2 or 4.3? I would love to be able to use the SD swap on pacman.
Sent from my Atrix HD using XDA Premium 4 mobile app
PeteSeiler2010 said:
Is there anyway to make this work for 4.2.2 or 4.3? I would love to be able to use the SD swap on pacman.
Sent from my Atrix HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will eventually make a flash out of the script posted for 4.3. There is an alpha I just through together.
aviwdoowks said:
I will eventually make a flash out of the script posted for 4.3. There is an alpha I just through together.
Click to expand...
Click to collapse
Sweet, I will test it when you make it available.
Sent from my Atrix HD using XDA Premium 4 mobile app
PeteSeiler2010 said:
Sweet, I will test it when you make it available.
Sent from my Atrix HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is there still a chance at having a 4.3 or 4.4 version of this SD Swap? I would be a test monkey for you if you need.
PeteSeiler2010 said:
Is there still a chance at having a 4.3 or 4.4 version of this SD Swap? I would be a test monkey for you if you need.
Click to expand...
Click to collapse
Did you try this diy version:
http://forum.xda-developers.com/showpost.php?p=48437512&postcount=4
I may go to Miui which is based on 4.2.2 & work a mod for that.
aviwdoowks said:
Did you try this diy version:
http://forum.xda-developers.com/showpost.php?p=48437512&postcount=4
I may go to Miui which is based on 4.2.2 & work a mod for that.
Click to expand...
Click to collapse
I did not try that, thanks for the information. I like Miui, please keep me posted if you do and if you need testers.
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Sony Xperia T (mint)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
For stock rom:
http://forum.xda-developers.com/showthread.php?t=2657190
Click to expand...
Click to collapse
XDA:DevDB Information
[mint][CWM Advanced Edition] PhilZ Touch, a Tool/Utility for the Sony Xperia T
Contributors
Phil3759, DooMLoRD, [NUT]
Version Information
Status: Stable
Created 2014-03-29
Last Updated 2014-03-29
Phil3759 said:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Click to expand...
Click to collapse
This rules that this has been ported, as I use the PhilzTouch on my Galaxy Tab2. I even donated a few $$ to him!
One question, with the shared kernel "feature" of the T, how did you avoid having it revert back to stock CWMrecovery anytime one flashes a new ROM?
Regardless, I'll try this out tonight.
Hey i always wanted this to get ported! Im using the leaked 4.3 rom and it does work but it only boots into the recovery everytime. Is this a bug or is there a way to fix this?
hhamzah49 said:
Hey i always wanted this to get ported! Im using the leaked 4.3 rom and it does work but it only boots into the recovery everytime. Is this a bug or is there a way to fix this?
Click to expand...
Click to collapse
It will be repacked into other kernels later...
Sent from my C6902 using xda app-developers app
So how do I go about installing this?
Is it as simple as boot the "T" into flashboot mode and running
fastboot -i 0xfce flash boot philz_touch_6.09.3-mint.img
But I'd rather not blow away my phone if this is wrong.
Can I use this for the xperia V, too ?
alex m. said:
Can I use this for the xperia V, too ?
Click to expand...
Click to collapse
No
Sent from my LT30p using Tapatalk
Is there a trick to using PhilzTouch on the T to avoid the shared kernel?
I installed it via "flashboot boot philz.img" and at first glance, it seems to work the same as on my Galaxy Tab 2.
But then it turns out that its not really useable.
a) I was unable to boot back into my normal ROM. Rebooting always brought it back to PhilzTouch.
b) Even if I could have found a way to boot my phone, it turns out that PhilzTouch recovery was overwritten by the stock recovery as soon as I installed a newer CM nightly which I tend to do nightly.
hi all
can i use for TX ? do i need UL or not ? thanks
How to install this recovery?
fastboot flash boot boot.img gives me each time a reboot in recovery
fastboot flash recovery boot.img gives me an error.
Anyone got this working?
Sent from my Xperia T using xda app-developers app
Thanks alot! Used it to get root on the new 4.3 update:good::good:
silasje1 said:
Thanks alot! Used it to get root on the new 4.3 update:good::good:
Click to expand...
Click to collapse
Would you please share how you did it? A how-to would be great including which ROM you came from and all the steps in clear chronological order.
zilboris said:
Would you please share how you did it? A how-to would be great including which ROM you came from and all the steps in clear chronological order.
Click to expand...
Click to collapse
You need Unlocked Boatloader at first!
1. install the 4.3 rom (any you like). Flashing the FTF with everything included
2. Flash this CWM recovery and install SU zip
3. flash FTF and exclude all except KERNEL.
Done! (limited time to write so made it short)
@Phil3759
@steveboss is reporting an extremely sensitive touch interface, is there any way you can confirm it is working out of the ordinary?
[NUT] said:
@Phil3759
@steveboss is reporting an extremely sensitive touch interface, is there any way you can confirm it is working out of the ordinary?
Click to expand...
Click to collapse
I need video of this "extremely..."
Phil3759 said:
I need video of this "extremely..."
Click to expand...
Click to collapse
Hello, I send you video tomorrow
@steveboss where's the video?
@Phil3759
I'm having trouble to get philz to recognize the internal sdcard partition (its a real partition, not part of userdata)... what ever I try, it just keeps failing...
Do you have a possibility to build philz based on the CM10.1 or the freexperia 'jellybean' repo for this device?
I'm starting to suspect the CM10.2 repo might contain some issues as it was put together with pure CM in mind, which might make it incompatible with the stock sony JB4.3 kernel...
The Xperia T made a jump from JB4.1.2 to JB4.3 in one step up, receiving it only a month or so ago, while the CM10.2 repo has been around for far longer...
The 'original' locked bootloader package has made the same jump up recently and CWM started causing problems for it's users too.
[NUT] said:
@steveboss where's the video?
Click to expand...
Click to collapse
I`am sorry, I don`t have any camera now, maybe at weekend
[NUT] said:
@steveboss where's the video?
@Phil3759
I'm having trouble to get philz to recognize the internal sdcard partition (its a real partition, not part of userdata)... what ever I try, it just keeps failing...
Do you have a possibility to build philz based on the CM10.1 or the freexperia 'jellybean' repo for this device?
I'm starting to suspect the CM10.2 repo might contain some issues as it was put together with pure CM in mind, which might make it incompatible with the stock sony JB4.3 kernel...
The Xperia T made a jump from JB4.1.2 to JB4.3 in one step up, receiving it only a month or so ago, while the CM10.2 repo has been around for far longer...
The 'original' locked bootloader package has made the same jump up recently and CWM started causing problems for it's users too.
Click to expand...
Click to collapse
Look at the fireball device repo (fstab file) to use vold with real sdcard partition
Else use compatibility recoveryonly option in fstab with real blk device path
Phil3759 said:
Look at the fireball device repo (fstab file) to use vold with real sdcard partition
Else use compatibility recoveryonly option in fstab with real blk device path
Click to expand...
Click to collapse
ooh, that could be the trick :cyclops:
Thanks for the hint :good:
I'll update you once I know if it works or not.
[Q&A] [ROM][NewBL][F2FS][GCC4.8][JDK7][OpenDelta][gapps] SlimKat 4.4.4 (build 8.4)
Q&A for [ROM][NewBL][F2FS][GCC4.8][JDK7][OpenDelta][gapps] SlimKat 4.4.4 (build 8.4)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
usb transfer
With 8.4 i have problems with usb transfer from PC to phone.
one small <100KB single file is ok but +1MB single file or with many <100KB the transfer is always hanging after a few percent. latest lg driver pack 3.12.3 is installed on win8.1.1 x64
no problems with previous version!
b257762 said:
With 8.4 i have problems with usb transfer from PC to phone.
one small <100KB single file is ok but +1MB single file or with many <100KB the transfer is always hanging after a few percent. latest lg driver pack 3.12.3 is installed on win8.1.1 x64
no problems with previous version!
Click to expand...
Click to collapse
You refer, transfer to internal memory or SD card?
Problems installing slimcat 8.4 or 8.6.1 on my P990
Since this is my first post here please be patient with me. I have previously installed successfully version 7.8. Then trying to update to 8.4 or to clean install 8.4 did not work. Although twrp says "succsess" the phone when rebooted halts on LG logo. Tried to flash 8.6.1 - no success, changed partition format to f2fs and again at boot the phone displays s/w upgrade, wait for... and does not boot. I can fortunately restore previous 7.8 install from backup. Any suggestions?
achamienia said:
Since this is my first post here please be patient with me. I have previously installed successfully version 7.8. Then trying to update to 8.4 or to clean install 8.4 did not work. Although twrp says "succsess" the phone when rebooted halts on LG logo. Tried to flash 8.6.1 - no success, changed partition format to f2fs and again at boot the phone displays s/w upgrade, wait for... and does not boot. I can fortunately restore previous 7.8 install from backup. Any suggestions?
Click to expand...
Click to collapse
Did you installed the rom again after changing the partiotn format to f2fs?
DJNoXD said:
Did you installed the rom again after changing the partiotn format to f2fs?
Click to expand...
Click to collapse
Yes, I performed full factory reset, wiped caches and then reformatted data and system partitions to new format. Then installed 8.6 from zip and TWRP comunicated "success". But my device stalls at boot on lg logo now.
uhmm su660?
@DJNoXD is it possible to have this on su660? I dont know how to make the partition of su660 to F2FS theres no selection of it in TWRP... I want this rom to my su660... Thanks
Nathan20 said:
@DJNoXD is it possible to have this on su660? I dont know how to make the partition of su660 to F2FS theres no selection of it in TWRP... I want this rom to my su660... Thanks
Click to expand...
Click to collapse
You need a new twrp version.
In general it is possible, but I don't know the diffrences between p990 and su660 (only kernel?).
My device does not recognize the root. how do I activate?
DJNoXD said:
You need a new twrp version.
In general it is possible, but I don't know the diffrences between p990 and su660 (only kernel?).
Click to expand...
Click to collapse
Well yeah , I have the new TWRP 2.7.1.0 when you go changing partitions, there's no F2FS in the option only ext1, ext2,... etc, could you anyway, make the recovery in the p990 compatible with su660?
Sent from my LG-P990 using XDA Free mobile app
Nathan20 said:
Well yeah , I have the new TWRP 2.7.1.0 when you go changing partitions, there's no F2FS in the option only ext1, ext2,... etc, could you anyway, make the recovery in the p990 compatible with su660?
Sent from my LG-P990 using XDA Free mobile app
Click to expand...
Click to collapse
You also need a kernel with f2fs support.
Maybe that is the reason why you can't see f2fs inside the recovery.
DJNoXD said:
You also need a kernel with f2fs support.
Maybe that is the reason why you can't see f2fs inside the recovery.
Click to expand...
Click to collapse
Oh I see, I don't think there's no kernel in su660 that supports it, and firtecy's kernel is for p990 only... Its hopeless haha, BTW thanks for your help
Sent from my LG-P990 using XDA Free mobile app
All4nK2 said:
My device does not recognize the root. how do I activate?
Click to expand...
Click to collapse
-> FAQ
Hi i really like slimkat,and i have any suggestions : 1) would be great if you can add a way to swap sdcard between internal and external like in cm11
2) i think that hktheme manager is useful but now we have a lot of themes for the new cm theme engine,so consider to port it .anyway thanks a lot for your work
Hi everyone...
I have a p990 and stuck at the 7.8 ver. because my device don't show the f2fs option in the latest twrp...I have done a clean install (wiped everything) of 7.8 , installed the new twrp, and when I go to change the extension to f2fs, there is not that option there What am I doing wrong?
Tryed to install and the latest ver. of kernel but still nothing there...I forgot to tell you that the ROM (8.6.... .zip) is in the external sd card...
Done Used the AIO toolkit and flashed the v30 A and done everything from the beggining...Thanks and sorry for the mess
Sorry for my bad english
Hello
USB not connecting displays PCTVCenter? See picture.
How to explain connects usb driver?
Thank you.
.PKZ. said:
Hello
USB not connecting displays PCTVCenter? See picture.
How to explain connects usb driver?
Thank you.
Click to expand...
Click to collapse
I think there no support enabled inside the kernel, or the kernel has no driver for your device.
Did you look into logcat (rom and kernel) if anything is logged?
DJNoXD said:
I think there no support enabled inside the kernel, or the kernel has no driver for your device.
Did you look into logcat (rom and kernel) if anything is logged?
Click to expand...
Click to collapse
Hello DJNoXD,
Yes ca, Watching search logcat, I find not, where? Parameter?
Or (rom and kernel) ?
You can me explain?
Thank you.
.PKZ. said:
Hello DJNoXD,
Yes ca, Watching search logcat, I find not, where? Parameter?
Or (rom and kernel) ?
You can me explain?
Thank you.
Click to expand...
Click to collapse
One more question : does it work with stock rom?
DJNoXD said:
One more question : does it work with stock rom?
Click to expand...
Click to collapse
Hello
LG-P990, Slim 4.4.4 build 8.10 works well,
-Install PCTVCenter
-USB not connect
-Anything not auto connect open PCTVCenter
-I'm trying to change Rom MIUI 4.1 (4.5.30) does step starter... Too old?
-Before, I recalls HDMI works with Miui, not market Slim, perhaps same USB not work Slim, if I'm wrong?
I disappointed.
Thank you.
Kind regards.