Database Develop

[Stock Boot Animation] Restores the stock boot animation

Someone asked for a DK28 kernel that supports EXT4 without custom boot animation support.
They wanted the stock boot animation. This is the result.
Here is a link to the original thread.
:[Installer]:
epic_stock_boot.zip
What it does:
Restores stock animation files into /system/media
Code:
bootani.qmg
bootsamsung.qmg
bootsamsungloop.qmg
Restores the stock boot sound into /system/etc
Installs a single black frame bootanimation.zip into /system/media​This was the only way I was able to get the stock boot screen to show with out flickering.
Basically, it plays a single black frame and then continues into the stock animation.
The single black frame is not noticeable (at least to me).
:[Cleaner]:
epic_stock_boot_cleaner.zip
What it does:
Removes stock animation files from /system/media
Code:
bootani.qmg
bootsamsung.qmg
bootsamsungloop.qmg
From my experience, the 3 stock qmg files will cause a conflict with custom boot animations.
Both animations seem to be shown at the same time with mad crazy flickering.
Use the cleaner before you install a custom animation.
:[Testing]:
This has been tested and is working on Bonsai v2.0.1
:[Changelog]:
2-12-11
Added cleaner zip.
Updated installer to use PowerOn.wav from DK28 (instead of one I found on the forums).
2-12-11
Initial release.
=]

Thank you for this
Sent from my SPH-D700 using Tapatalk

dreamsforgotten said:
Thank you for this
Click to expand...
Click to collapse
NP. In the end I kind of tricked it into working.
I tried to modify the init.rc file on my phone and only use the stock files.
Couldn't get it to work, and I don't think we can automate an init.rc mod w/o re-packing the whole kernel anyway.
I tried using the 1st frame of the sprint animation but it had a flicker.
Also tried using the samsungmobile splash screen, again slight flicker at the start.
So this is as good as it gets for now (black no flicker), and it's acceptable in my opinion.
I just hoped someone finds it useful, and it seems you have.
;]

Thanks Nube! So could I edit-add files to the bootanimation.zip in the files folder to make a custom boot ani?
I.e. set a path for the parts of the custom boot under the desc.txt and create parts folders with the boot frames in them?

running_the_dream said:
Thanks Nube! So could I edit-add files to the bootanimation.zip in the files folder to make a custom boot ani?
I.e. set a path for the parts of the custom boot under the desc.txt and create parts folders with the boot frames in them?
Click to expand...
Click to collapse
You would not want to use this as a base for creating your own custom boot animation!
From my experience the 3 qmg files this file restores will conflict with a normal custom boot animation.
I should have mentioned that in the OP (I'll add it). I'll throw together a stock animation removal zip.
If you want to create your own custom animation, I would say you should start with this guide here (best resource I've found).
And then once you feel you understand what's being done, I would say you should check out this program here.
That should get you going.
=]

Thanks again Nube. I'll review those threads

running_the_dream said:
Thanks again Nube. I'll review those threads
Click to expand...
Click to collapse
NP.
[edit]
Oh, I should add that I totally ignored the scripting (zip scripting) part of that guide.
The guide might be outdated and might still be using amend scripting.
I already know my way around an edify script, so I didn't pay attention to that part.
[/edit]
OP updated.
=]

Haha yup I figured those threads assumed amend scripting. I remember someone posting the steps to convert amend script to edify (might have been you in fact). Looks like I'll need to do a lot of reading...when I get to a computer

running_the_dream said:
Haha yup I figured those threads assumed amend scripting. I remember someone posting the steps to convert amend script to edify (might have been you in fact). Looks like I'll need to do a lot of reading...when I get to a computer
Click to expand...
Click to collapse
Probably was me or Dameon87, I made the amend2edify converter also.
A simple script for a boot animation would be:
Code:
ui_print("Mount /system.");
run_program("/sbin/mount", "/dev/block/stl9", "/system");
ui_print("Install files.");
package_extract_file("files/PowerOn.wav", "/system/etc/PowerOn.wav");
package_extract_file("files/bootanimation.zip", "/system/media/bootanimation.zip");
ui_print("Set permissions. Just to be safe.");
set_perm(0, 0, 0644, "/system/etc/PowerOn.wav");
set_perm(0, 0, 0644, "/system/media/bootanimation.zip");
ui_print("Unmount /system.");
run_program("/sbin/umount", "/system");
That would be for the animation and the sound.
The files would be in a folder named "files" in the zip.
package_extract_file("files/PowerOn.wav", "/system/etc/PowerOn.wav");
package_extract_file("files/bootanimation.zip", "/system/media/bootanimation.zip");
Click to expand...
Click to collapse
=]

Thank you for posting this
changing the wav file in there would affect the boot sound right?
just simply change the file name to poweron
I wanted to change it to say something like "this shi7 is epic!!! haha

Thanks for remover zip
THANKS! I didn't really need the stock one but the remover did come in handy rather than going in and removing them myself.

Would this work with restoring the stock animation on any version, for example EB13? Or is this only for DK28?

klownin816 said:
Would this work with restoring the stock animation on any version, for example EB13? Or is this only for DK28?
Click to expand...
Click to collapse
Yes it will work with EB13

iamchocho said:
THANKS! I didn't really need the stock one but the remover did come in handy rather than going in and removing them myself.
Click to expand...
Click to collapse
Glad it was useful to you.
klownin816 said:
Would this work with restoring the stock animation on any version, for example EB13? Or is this only for DK28?
Click to expand...
Click to collapse
As long as the file names have not changed, it should.
AJC9000 said:
Yes it will work with EB13
Click to expand...
Click to collapse
And thank you for the confirmation that it does.
=]

Perfect, thanks!!

sorry for the noob question, but do i just apply th cleaner from th sdcard in cwm? i have stock eb13 w genocide kernal and th stock animation runs in th background to th android logo in th forground. I just wanna make sure all that remains is th android logo. thanx for any help

jspsuperman said:
sorry for the noob question, but do i just apply th cleaner from th sdcard in cwm? i have stock eb13 w genocide kernal and th stock animation runs in th background to th android logo in th forground. I just wanna make sure all that remains is th android logo. thanx for any help
Click to expand...
Click to collapse
If you just want the default "no animation" shimmering android logo, then yes just run the cleaner from CWM.
=]

bringing back an old thread b/c this is a great idea for kernels with custom boot animation support enabled where the user still wants to remain on a stock rom (with the stock boot animation)
i've linked this thread into my kernel's OP...thanks nubecoder

No Boot Animation?

Somehow my Boot Animation disappeared? I'm running sense virus rom. I deleted all my boot animation. zips to try to get everything off the device and then I downloaded the stock animation and put it in the media file and the system custom resource file and it goes to my splash screen, then goes black, and then the phone comes on. Any idea how to fix this so I don't have just a black boot animation? Is there a stock boot animation around? What are the steps to properly installing it?

Didu name it right? Some have to b VZW_bootanimation. Others just bootanimation
inc

try this name it bootanimation i think thats what virus needs not VZW_bootanimation and pretty sure ur right about location(sys/customize/resource/)
still savin fora TB so dont have one to test

Downloaded it and renamed it bootanimation.zip then copied it from my SD card in root explorer and placed it into my system/customize/resource folder along with my system/media folder.
Restarted my phone. Got my splash screen, then screen went black. No animation.
Then I tried it using VZW_Bootanimation.zip
No luck. WTF!!!!!

Are u pasten 2 times?
inc

It only goes in resources
inc

Rom-Addict said:
It only goes in resources
inc
Click to expand...
Click to collapse
Would it matter if it was in both though? It should still work even if it was in both...?

droidboy850 said:
Would it matter if it was in both though? It should still work even if it was in both...?
Click to expand...
Click to collapse
Don't think so
inc

Well I'm stuck. Ha.

Take the one outta media?
inc

have stock virus animation but too big to uplaod.......virus bootanimation is a bit dif from stock

Extract all the files from the zip on your CPU.....hilight all the files and right click, select archive, when the window appears select zip, and from the drop menu select store....mine was doing this also if I just zip it.....hope this isn't too confusing
Sent from my ADR6400L using Tapatalk

[MOD] Boot animations for Nexus S

Installation
- Download the .zip file.
- Reboot into recovery mode.
- Flash the downloaded .zip file.
- Done.

.... Reserved ....

Boot animation v2.0
Flash the .zip file using CWR.

Boot animation v3.0
This one is my personal favorite, it's worth trying.
Flash using CWR.

Boot animation v4.0
Flash using CWR.

Boot animation v5.0
Flash using CWR.

Boot animation v6.0
Flash using CWR.

Boot animation v7.0
Flash using CWR.

Stock boot animation - NS
Flash using CWR.

Umm nice animations dude but was it necessary to post each one in a new post?
Sent from my Nexus S MV from the XDA Premium app.

Lol
Sent from my HTC Sensation 4G using XDA App

kenvan19 said:
Umm nice animations dude but was it necessary to post each one in a new post?
Sent from my Nexus S MV from the XDA Premium app.
Click to expand...
Click to collapse
Aesthetics, i think it gets messy if you post too much stuff in one post. One thing i want to ensure u that there is no waste of paper in it.
Regards
Faisal

I'm trying to change my boot animation from yours to another but I can't delete yours. Whenever I put a new file in the system/media folder your bootanimation still shows up on reboot. Is there a special thing I need to do to delete your animation?

cloo24 said:
I'm trying to change my boot animation from yours to another but I can't delete yours. Whenever I put a new file in the system/media folder your bootanimation still shows up on reboot. Is there a special thing I need to do to delete your animation?
Click to expand...
Click to collapse
yeah you have to delete the bootantimation thats is there first. thats how i do it. good luck
OP you have some kewl BA. I'll try one or two out, I'm a BA junkie.

cloo24 said:
I'm trying to change my boot animation from yours to another but I can't delete yours. Whenever I put a new file in the system/media folder your bootanimation still shows up on reboot. Is there a special thing I need to do to delete your animation?
Click to expand...
Click to collapse
I had the exact same problem when I flashed Galaxy nexus bootanimation Weeks ago, and deleting the bootanimation zip first didn't solve it.
After a bit of exploring I found another bootanimation.zip in /data/local/ and replacing the zip there solved the problem.

Any youtube or gif previews available?

Does anyone have a flashable stock boot animation from ICS?

Nope.
Also, there should be a general thread for all people to post their bootanimation creations.

why isnt there any good boot animations

[GUIDE][MOD] How To Change Bootanimation on Stock ROM

Bootanimation for Stock ROM
Now it is possible to set custom bootamination on stock ROM too...
and it is very simple and easy!!
Things You Need
- Rooted Phone
- CWM
- Root Explorer (any)
- Basic Knowledge
How to:
1- Download bin_update.zip (download link given below) and place it in your sd card
2- (Optional. Do only if you fail) Open Root Explorer, go to /system/media and Delete all .qmg files (don't delete 'audio' and 'video' folder)
3- Now copy the bootanimation.zip file of your choice and paste it here: /system/media (remember the name of animation file must be 'bootanimation'
4- Change permission to rw-r--r--
5- Now Boot your phone in ClockWorkMod Recovery
6- Flash bin_update.zip
7- Reboot and enjoy
========================================
Download From Here
========================================
Credits:
- SnowPluralism for this thread
- rajrocks for RazoDroid ROM.
i got bootanimation and samsungani files from RazoDroid. Hope he doesn't mind
Troubleshooting: If you are stuck on boot logo, boot your phone in cwm recovery mode, go to advance and fix permissions.
even if that doesn't work then restore your system.
now follow steps 1,2,3 and 4.
then extract bin_update.zip
in extracted directory you will see two folder, META-INF and system.
go to system/bin copy bootanimation and samsungani
and paste it in /system/bin (replace if file already exist).
change the permissions of both file to rwxr-xr-x
and reboot. enjoy
i take no responsibility if you brick your device.
so please take nandroid backup of your phone before doing anything

Cool Bootanimations
- Get Collection of cool boot animations from THIS thread by Lalit Patil
- Get Galaxy S3 logo from THIS thread by nikhil_dabral_29
- CM 10 and CM 9 boot animations from HERE by Xx James xX
- Get nexus boot animation from HERE by Boudz78
- More boot animations from HERE by Boudz78

Thanks worked no problems on my stock ROM.
My phone boots way faster now too
Do u know how to change the first splash screen ?

You have to extract kernel and change the boot logo .rle image there
I haven't managed to do that

cal2011 said:
Thanks worked no problems on my stock ROM.
My phone boots way faster now too
Do u know how to change the first splash screen ?
Click to expand...
Click to collapse
as areeb jamal said, u will have to modify boot.img to change the splash screen..
there are a few guides which will tell u how to extract kernel..
but as u will be playing with the kernel, there is very good chance of bricking (or may be hard bricking) your device..
so proceed with caution :thumbup:
Sent from my GT-S5830i using xda app-developers app

download link not working

sidsaw said:
Click to expand...
Click to collapse
sorry,
link updated

thanx
srt99 said:
sorry,
link updated
Click to expand...
Click to collapse
thnx a lot
so now i can make my own bootanimation
btw is there any software to edit .qmp files?

sidsaw said:
btw is there any software to edit .qmp files?
Click to expand...
Click to collapse
from what i have read, it is impossible to edit qmg files....samsung made it that way..!!
but you can create your own qmg bootanimation using some software.i don't remember the name..but there is a tutorial on how to create qmg bootanimation..!
Sent from my GT-S5830i using xda app-developers app

one more problem
aftr doing this changes abt boot screen i cant see inbuild ringtones in ringtones list
although they r there in phone but it is not shown in ringtones list
help
Sent from my GT-S5830i using xda app-developers app

sidsaw said:
one more problem
aftr doing this changes abt boot screen i cant see inbuild ringtones in ringtones list
although they r there in phone but it is not shown in ringtones list
help
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
it doesn't affect the ringtones and notifications...
it should not be happening..
may be u have not followed steps correctly...
download some ringtones and transfer those tones to ringtone folder and set permissions and reboot..
Sent from my GT-S5830i using xda app-developers app

It worked!!

will this step work in Samsung Galaxy Chat B5530 (if not, can please teach me how) sorry if this is off topic please help

Thanks for your guide!:thumbup:
Sent from my GT-S5830i using Tapatalk 2

how to chenge boot anamation for glaxay trend 7392
i flash costum rom but not show for system midea bootanmation.zip how to chenge boot

I Created My own custom boot animation but it goes black

So i created my own custom boot animation sized 480x800 with boot animation creator. I tried testing with boot animation creator. It perfectly works. But when i put it on System/media and reboot it. It just goes black but with sounds. can someone fix it? I really need your cooperation. Thanks!

MattPaulo said:
So i created my own custom boot animation sized 480x800 with boot animation creator. I tried testing with boot animation creator. It perfectly works. But when i put it on System/media and reboot it. It just goes black but with sounds. can someone fix it? I really need your cooperation. Thanks!
Click to expand...
Click to collapse
I dont know if you have fixed it or not but i have built a couple of boot animation for the galaxy s. I used movies instead an u created them manually so i dont know how to use the animation creater. However, you could upload the desc.txt from your zip file so i can have a look
Are u using a video or a set of pngs