Database Develop

ICS Leak 6.16.217 Update zip, boot.img and crc

AS of 8/18 - You can download this directly from moto by checking settings>about phone>system updates
D4 6.16.217 ICS Leak files. Download and open the zip to find the update file, boot.img (named ICSFIX) and the crc. If too many of you jump on this at once the host my go down. Be great if someone could mirror. I have a very slow dsl upload speed here and no 4g. Took about 3 hours just to get this up.
D4 6.16.217.zip - 366.95 MB
If you using the the ICS only tool, then just add the ICSFIX.img to the files folder. Be sure you have the update zip on your sdcard or both the update zip and the crc in your cache.
Please note this is not a full rom. It must be installed over stock GB or if you are on a ICS leak using a jump method to install. The shortest method I know of is to flash in fastboot the GB system file, the preinstall, then the boot.img for the ICS leak and then in stock recovery the update zip.

I will install it when I get home tonight
Sent from my XT894 running ICS

Same here, once I have sometime tonight ill install and provide any info.
Thanks for taking the time to put the file up
Sent from my DROID4 using xda app-developers app

FYI - I was getting some weird installation messages about not being able to mount my userdata partition, I performed factory reset through the recovery, then rebooted and everything was resolved.
I think it was something like error code 7, can't remember exactly although it looked similar to this:
Code:
Installing update...
assert failed: mount("ext3", "MTD", "userdata", "/data")
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.

Am I confused, or does that look like an older baseband than 215? Hmm...

podspi said:
Am I confused, or does that look like an older baseband than 215? Hmm...
Click to expand...
Click to collapse
Yeah, for LTE older version. Anybody seeing some difference with 215?

i haven't noticed much difference over 215.
Sent from my DROID4 using Tapatalk 2

Mirror: http://db.tt/O3h3scTr
Sent from my Droid 4

jsnweitzel said:
D4 6.16.217 ICS Leak files. Download and open the zip to find the update file, boot.img (named ICSFIX) and the crc. If too many of you jump on this at once the host my go down. Be great if someone could mirror. I have a very slow dsl upload speed here and no 4g. Took about 3 hours just to get this up.
D4 6.16.217.zip - 366.95 MB
If you using the the ICS only tool, then just add the ICSFIX.img to the files folder. Be sure you have the update zip on your sdcard or both the update zip and the crc in your cache.
Click to expand...
Click to collapse
Any change log ?

jsnweitzel said:
i haven't noticed much difference over 215.
Click to expand...
Click to collapse
Yep, successfully installed - don`t see any difference yet.

So far so good... Don't notice much of a difference, but it's only been a few hours...
BTW, since I lost root I figured I might as well confirm (from my thread in the general forum from a while ago), it does default to the interactive governor instead of hotplug. I'm not sure how large a difference this makes in battery life though.

Yeah you have to reroot, but it works just fine still.
Sent from my DROID4 using Tapatalk 2

Danifunker,
I too had that error coming to 215, I had to wipe in order for it to finally work. Can't say for sure why/what, but at least wiping got me to 215.
Sent from my DROID4 using Tapatalk

I have a D4 but I have not done any modding on it other than installing AOKP through recovery. The person I got it from had already flashed an ICS leak. Forgive my ignorance but I am unclear on some things surrounding the D4. Can I install this through CWM or does it need to be done with some other utility? I am also unclear on what leaks provided working voice and data on gsm. If possible can anyone confirm that this leak will allow me to use the D4 on GSM 850 and 1900? Thanks in advance.
Edit: So I reread the OP and I will try to get this running on the ICS tool, but if anyone can address my question about gsm bands, I would still appreciate it.

gdog1977 said:
Tried to update, got an error, then wiped got another error. Ended up just flashing back to 215. DON'T WASTE YOUR TIME WITH THIS.
Click to expand...
Click to collapse
I got it running from the start. Did you use jsnweitzel's tool? Alle you need to do is replace the \Droid4 ICS Only\files\ICSFIX.img with the one from the zipfile. Place the 219/217~crc and 219/217~zip on your SD and you should be ready to go.
At least four other users succeeded. So nobody's wasting time here.

Die Bruine said:
I got it running from the start. Did you use jsnweitzel's tool? Alle you need to do is replace the \Droid4 ICS Only\files\ICSFIX.img with the one from the zipfile. Place the 219/217~crc and 219/217~zip on your SD and you should be ready to go.
At least four other users succeeded. So nobody's wasting time here.
Click to expand...
Click to collapse
+1 = 5 users. I did crash and burn by forgetting to replace the 217 boot image, with ICSFIX.img, but that was my fault.
I'm up and running on 217 just fine.
Sent from my DROID4 using Tapatalk 2

gdog1977 said:
Tried to update, got an error, then wiped got another error. Ended up just flashing back to 215. DON'T WASTE YOUR TIME WITH THIS.
Click to expand...
Click to collapse
Really, maybe if you let us know what trouble you had we could help instead of attacking. This is also posted over at droidfroums.net with a couple of mirrors. Just counting my hosting site this has 127 downloads.
This is not a full rom but a patch to stock GB. I edited the op with a little more information. Those of us that have went from one leak to another already know this.

gdog1977 said:
Tried to update, got an error, then wiped got another error. Ended up just flashing back to 215. DON'T WASTE YOUR TIME WITH THIS.
Click to expand...
Click to collapse
Next time, try to factory reset then reboot and try to reapply the update.

Can you install/upgrade to ICS straight to .217 or do you need to install .215 then update with .217?
The page that the link from the ICS Tool thread links to only goes up to .215 for install/upgrading from GB

If you are on stock GB you can go straight to ICS 217. ICS 215 was the current leak when I wrote the ics only tool.
Sent from my DROID4 using Tapatalk 2

Help! Cant update to Jellybean on Atrix HD LTE (AT&T)

While I couldn't wait for ever for the update, I decided to root, I customized a bit and then I find out there is a new update, so I tried to update. Of course, my update failed (status: 7).
I believe that this is due to customization, can someone show me how to restore to stock or how to successfully update?
Thanks in advanced!

xXckkillerXx said:
While I couldn't wait for ever for the update, I decided to root, I customized a bit and then I find out there is a new update, so I tried to update. Of course, my update failed (status: 7).
I believe that this is due to customization, can someone show me how to restore to stock or how to successfully update?
Thanks in advanced!
Click to expand...
Click to collapse
Get your phone back to stock state... You deleted apps, restore them. You did make a backup right??
If you didn't do the ota to the jb leak then rsd back to stock ICS. Read the threads.
Sent from my MotoAHD

thanks
Thank you for responding, I tried this rsd lite thing already, im not on the jb leak im on stock 4.0.4 and when i tried to restore it would get to 1/23 and then say that it failed flashing. Now everytime i power on it boots to ap fastboot, i know how to get out of ap by the boot menu but its still kind of bothering me, any alternative to that?

xXckkillerXx said:
Thank you for responding, I tried this rsd lite thing already, im not on the jb leak im on stock 4.0.4 and when i tried to restore it would get to 1/23 and then say that it failed flashing. Now everytime i power on it boots to ap fastboot, i know how to get out of ap by the boot menu but its still kind of bothering me, any alternative to that?
Click to expand...
Click to collapse
Make sure your battery isnt low, then use the utility in the dev threads.

I did
SirHoover2010 said:
Make sure your battery isnt low, then use the utility in the dev threads.
Click to expand...
Click to collapse
No hope, I tried plugged in / non plugged in at 100%!
It seems I need to full restore and, (Atrix HD Utility 1.00 doesn't work!) I need help restoring to factory 4.0.4 or Jellybean!!!!!!!!!!!!!!!
PLEASE HELP I NEED JELLYBEAN

(Request thread to be closed, issue resolved)
Sent from my Motorola Atrix HD using xda app-developers app

No...let the thread open!
Question...can someone pls post a screenshot from system-media(wich files are in)?
Replaced the stock boot animation (with rom-toolbox app)...It works but update fails again..
Again...replaced all missing system apps and vendor apps with permission:
read: group, owner, other
write: owner
Should be right?
Superuser app is in system-app too! Is that right too?
Thx.:good:

heifeif said:
No...let the thread open!
Question...can someone pls post a screenshot from system-media(wich files are in)?
Replaced the stock boot animation (with rom-toolbox app)...It works but update fails again..
Again...replaced all missing system apps and vendor apps with permission:
read: group, owner, other
write: owner
Should be right?
Superuser app is in system-app too! Is that right too?
Thx.:good:
Click to expand...
Click to collapse
Refer to my new thread: http://forum.xda-developers.com/showthread.php?t=2050416
This will give you a fix i just need like 3 hours to upload the necessary files.

How to get your BELL ATRIX HD onto At&t Jellybean (4.1.1) - Unlocked bootloader ONLY!

How to get your BELL ATRIX HD onto At&t Jellybean (4.1.1) - Unlocked bootloader ONLY!
I would like to start saying that I’m not responsible for whatever happens to your phone. Thanks to MATTLGROFF who figure out this way of flashing this jellybean leak on my phone.
Having that said THIS IS ONLY FOR BELL ATRIX HD USERS THAT HAVE THEIR BOOTLOADER UNLOCKED. Please read thru and ask any questions before attempting
OK here we go:
1. I assume you’re in stock BELL ICS ROM (77.55.18.MB886.BellMobility.en.CA) … it doesn’t matter if you’re rooted or not. Make sure you have the motorola drivers installed.
2. Enable debugging mode on your phone (settings>development options> enable USB debugging)
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
4. Now double check you’re unlocked.
5. Make sure you have a charged battery (more than 60%) and boot into fastboot. (if you're not already here)
6. Now download the stock ICS zip for At&t.
a. Unzip it
b. Make sure you have the fastboot files in the same folder/path as your fxz files.
c. Flash the boot.img from the at&t zip.
i. Hold the shift key down and right click on the unzipped folder. Now in the dropdown menu click “open command prompt here”
ii. Now type “fastboot flash boot boot.img”
d. Flash the system.img
i. "Fastboot flash system system.img”
ii. you should be in Stock att ICS rom now.
7. Now download the file for the stock at&t Jellybean zip. ( you will be able to go back to ICS --I have gone back to stock 4.0.4 Bell ROM-- bc you’re only flashing boot and system images)
8. Now start back at step 6 but with the jelly bean leak ---- Or you can try just going to settings and checking for updates! (haven't tried this yet - don't know if it will flash something we don't want it to UPDATE: I guess it doesn't work)
9. You should be on AT&T Jellybean now - and you probably(thanks soulja) lost root...
Fastboot link: https://www.dropbox.com/s/rhlcajoerowtpiw/fastboots.zip
Stock ICS link: http://forum.xda-developers.com/showthread.php?t=1853522
Stock JB link: https://www.dropbox.com/s/65ro5ddf5mhdc9f/7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml.zip

reserved. IF you have any questions please ask!

gabo_e30 said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
4. Now double check you’re unlocked.
5. Make sure you have a charged battery (more than 60%) and boot into fastboot. (if you're not already here)
Click to expand...
Click to collapse
You might want to just clarify that "adb reboot-bootloader" puts the device into fastboot. Took me a few minutes to figure that out.
gabo_e30 said:
9. You should be on Jellybean now - and you prolly lost root...
Click to expand...
Click to collapse
...probably! not "prolly"!
OK, so I think I followed the directions properly, it appears SafeStrap is gone, and I now get new boot animations, a "thumping" Motorola logo and then an AT&T Rethink Possible. But it seems to be stuck after it plays that, with the AT&T logo and "Rethink Possible" message. Help!
UPDATE: After much flailing about, I got it into Recovery mode (could only get there by adb reboot recovery, the vol up/down + pwr only gets me a white texted menu which included "factory" but didn't do anything".) Will see if this works.
UPDATE 2: YES! After the factory reset, I let it boot up again. I was about to give up and try going back to ICS, but then it went past the Rethink Possible logo to a configure phone screen.
UPDATE 3: What... OK so it thinks it's an AT&T phone now, that's OK. It also shows it connected to 4G which it never has (always E, H or H++) But it's still on 4.0.4 ICS even though I did load the JB rom. But I just checked updates and it's got 4.1.1!!
UPDATE 4: Update (98.4.20.en.US) downloaded. Hitting install now...
UPDATE 5: CRAP. After reboot "The software update failed!" I might try reflashing the file from 7.7.1Q-144_MB886_MR1-22_SIGNED_CFC
UPDATE 6: No joy. :/ Any tried flashing Blur_Version.77.12.22.MB886.ATT.en.US.zip? After the above procedure, is my phone now "really" an AT&T phone?
UPDATE 7: I followed the thread about fixing failed update http://forum.xda-developers.com/showthread.php?t=2050416, and then got the OTA update. THIS TIME IT WORKS!!! I did lose root though. Oh well. I tried motofail2go again, but I couldn't get the "bug report" vibrate to happen.

noob problem with adb
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
i just unlocked root with Motofail2Go

w0hnzimmer said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
Click to expand...
Click to collapse
First step is actually to get Motorola drivers installed on your PC, as well as adb tools. Sorry I don't have a link handy. Then from PC do the "adb reboot-bootloader".

Can this be done with at&t and why not ?
Seems like you can go jb > ics easily.

souljaboy said:
Can this be done with at&t and why not ?
Seems like you can go jb > ics easily.
Click to expand...
Click to collapse
Step #4 and the title to the thread.
Sent from my MB886 using xda premium

capran said:
First step is actually to get Motorola drivers installed on your PC, as well as adb tools. Sorry I don't have a link handy. Then from PC do the "adb reboot-bootloader".
Click to expand...
Click to collapse
thanks, now i got "Device is LOCKED. Status Code: 0"
any chance to unlock ?
regards

w0hnzimmer said:
thanks, now i got "Device is LOCKED. Status Code: 0"
any chance to unlock ?
regards
Click to expand...
Click to collapse
The title of this threads says "Unlocked bootloader ONLY!" You haven't unlocked it yet. Please go read up on how to do that first.
1. Root. http://forum.xda-developers.com/showthread.php?t=1940594
2. Can't seem to find the bootloader bit...

ATGAdmin said:
Step #4 and the title to the thread.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
i know...
what unlocked changes is, you can replace the kernel... but the RSDLite can replace it too, i dont quite get it.

capran said:
You might want to just clarify that "adb reboot-bootloader" puts the device into fastboot. Took me a few minutes to figure that out.
...probably! not "prolly"!
OK, so I think I followed the directions properly, it appears SafeStrap is gone, and I now get new boot animations, a "thumping" Motorola logo and then an AT&T Rethink Possible. But it seems to be stuck after it plays that, with the AT&T logo and "Rethink Possible" message. Help!
Click to expand...
Click to collapse
YOu need to do a factory reset! Sorry forgot to include that in the steps! My Bad!
UPDATE: After much flailing about, I got it into Recovery mode (could only get there by adb reboot recovery, the vol up/down + pwr only gets me a white texted menu which included "factory" but didn't do anything".) Will see if this works.
UPDATE 2: YES! After the factory reset, I let it boot up again. I was about to give up and try going back to ICS, but then it went past the Rethink Possible logo to a configure phone screen.
Click to expand...
Click to collapse
YESSS!!! you figured it out!
UPDATE 3: What... OK so it thinks it's an AT&T phone now, that's OK. It also shows it connected to 4G which it never has (always E, H or H++) But it's still on 4.0.4 ICS even though I did load the JB rom. But I just checked updates and it's got 4.1.1!!
Click to expand...
Click to collapse
Yeah 4G is the same as H+, that's just how At&t symbolizes it
UPDATE 4: Update (98.4.20.en.US) downloaded. Hitting install now...
UPDATE 5: CRAP. After reboot "The software update failed!" I might try reflashing the file from 7.7.1Q-144_MB886_MR1-22_SIGNED_CFC
Click to expand...
Click to collapse
I guess it won't work huh?... we were lucky if it did!
UPDATE 6: No joy. :/ Any tried flashing Blur_Version.77.12.22.MB886.ATT.en.US.zip? After the above procedure, is my phone now "really" an AT&T phone?
Click to expand...
Click to collapse
No it's not really an at&t phone... you can flash back the Bell 4.0.4 ROM (I just did it). Remember it will ONLY WORK IF YOU HAVE AN UNLOCKED BOOTLOADER!
UPDATE 7: I followed the thread about fixing failed update http://forum.xda-developers.com/showthread.php?t=2050416, and then got the OTA update. THIS TIME IT WORKS!!! I did lose root though. Oh well. I tried motofail2go again, but I couldn't get the "bug report" vibrate to happen.
Click to expand...
Click to collapse
Cool you found a solution...(?) But it should work with the above Jellybean file. Gonna try it out again myself!

w0hnzimmer said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
i just unlocked root with Motofail2Go
Click to expand...
Click to collapse
Ok. SO install the moto drivers first (just google them -Motocast)
Now the fastboot files and put them in the same folder or path of the system and boot.img
Now connect your phone and make sure its in debugging mode
Open command prompt (cmd) in the folder you have the files you want to install. (do this by holding shift and right click on that folder)
Now type adb reboot bootloader IN CMD. You phone should reboot into fastboot! :victory:

capran said:
The title of this threads says "Unlocked bootloader ONLY!" You haven't unlocked it yet. Please go read up on how to do that first.
1. Root. http://forum.xda-developers.com/showthread.php?t=1940594
2. Can't seem to find the bootloader bit...
Click to expand...
Click to collapse
Capran you can't install it following this procedure. It won't work or you will brick.
This si only for unlocked bootloader Atrix HDs. There's only a few of them out there (they all seem to be BELL models, but not all Bell models) I think its the ones that shipped with system version: 77.55.17.MB886.BellMobility.en.CA. TheBootloader version is 10.96 i believe... and the locked one is 10.97 I think...

souljaboy said:
i know...
what unlocked changes is, you can replace the kernel... but the RSDLite can replace it too, i dont quite get it.
Click to expand...
Click to collapse
From what I understand is that RSDlite changes it but after and Only with kernels and files that r signed (by Moto)

gabo_e30 said:
Capran you can't install it following this procedure. It won't work or you will brick.
This si only for unlocked bootloader Atrix HDs. There's only a few of them out there (they all seem to be BELL models, but not all Bell models) I think its the ones that shipped with system version: 77.55.17.MB886.BellMobility.en.CA. TheBootloader version is 10.96 i believe... and the locked one is 10.97 I think...
Click to expand...
Click to collapse
How about the 77.55.18.MB886.BellMobility.en.CA can we flash it to our unlocked Atrix hd? I saw that there's an update to JB 4.1.2. on this version. Thanks
Sent from my MB886 using xda premium

I have an unlocked Bell Atrix HD. It was running 77.55.17 and I tried this method of flashing the AT&T software using fastboot and it didn't work. I could flash the boot.img, but when I went to flash the system.img.ext4 it would tell me that I had exceeded the download buffer. So at this point I had flashed the boot.img already and the phone wouldn't boot. I actually couldn't get any system.img files to flash from fastboot, even the Bell one, always the same exceeded the download buffer error. So I downloaded RSD lite and flashed the 77.55.18 Bell firmware to it via RSD lite and I was back in business again. At this point I just said to heck with it with fastboot and then flashed the stock ICS AT&T firmware via RSD lite only having used the modified XML file that is suggested to use. This worked perfectly fine as well. I was then able to root with motofail and use voodoo to backup my root. Then I just let it do the JB update OTA and that worked perfectly fine as well and then restored my root through voodoo and verified I still had root. Everything looks fine. The funny thing is I'm selling this phone, I have a Galaxy Note II now, but I was worried if I sold it with the Bell firmware nobody would want it since it was still ICS. Should be a bonus to someone that its unlocked, and rooted already hopefully.

ryuben2k said:
How about the 77.55.18.MB886.BellMobility.en.CA can we flash it to our unlocked Atrix hd? I saw that there's an update to JB 4.1.2. on this version. Thanks
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I used RSDlite (the latest one) to flash the 77.55.18 version on my phone.. now its the one im currently running. SO yeah you can flash it! ( i still don't have an update though) Link for teh FXZ file is in the OP (same place where the ICS at&t ROM is)

BHUGHESVA said:
I have an unlocked Bell Atrix HD. It was running 77.55.17 and I tried this method of flashing the AT&T software using fastboot and it didn't work. I could flash the boot.img, but when I went to flash the system.img.ext4 it would tell me that I had exceeded the download buffer. So at this point I had flashed the boot.img already and the phone wouldn't boot. I actually couldn't get any system.img files to flash from fastboot, even the Bell one, always the same exceeded the download buffer error. So I downloaded RSD lite and flashed the 77.55.18 Bell firmware to it via RSD lite and I was back in business again. At this point I just said to heck with it with fastboot and then flashed the stock ICS AT&T firmware via RSD lite only having used the modified XML file that is suggested to use. This worked perfectly fine as well. I was then able to root with motofail and use voodoo to backup my root. Then I just let it do the JB update OTA and that worked perfectly fine as well and then restored my root through voodoo and verified I still had root. Everything looks fine. The funny thing is I'm selling this phone, I have a Galaxy Note II now, but I was worried if I sold it with the Bell firmware nobody would want it since it was still ICS. Should be a bonus to someone that its unlocked, and rooted already hopefully.
Click to expand...
Click to collapse
Glad you worked it out! The first time I did it was from the 77.55.17 version, then I updated to at&t ICS the to JEllybean and now back to Bell ICS (77.55.18) Not sure what happened, but still glad you worked it out!
That's the great thing about the forums we can all work together in solving issues!

gabo_e30 said:
Glad you worked it out! The first time I did it was from the 77.55.17 version, then I updated to at&t ICS the to JEllybean and now back to Bell ICS (77.55.18) Not sure what happened, but still glad you worked it out!
That's the great thing about the forums we can all work together in solving issues!
Click to expand...
Click to collapse
Indeed, so glad I didn't brick it, lol. Maybe it was something wrong with the fastboot executables I used, I used the same ones I had downloaded a couple weeks ago to flash the HTC One V's that I got my kids for Christmas and not the ones linked to in the original post. It worked fine for for the One V's, not for the Atrix HD for some reason. Oh well, I just like tinkering with this stuff.

gabo_e30 said:
I used RSDlite (the latest one) to flash the 77.55.18 version on my phone.. now its the one im currently running. SO yeah you can flash it! ( i still don't have an update though) Link for teh FXZ file is in the OP (same place where the ICS at&t ROM is)
Click to expand...
Click to collapse
Thanks. Here's the link that i saw from motorola that there's an update for 77.55.18. and if someone from here can prove that they already upgrade to 4.1.2.
Thanks
https://motorola-global-en-usa.custhelp.com/app/answers/detail/a_id/92147
Sent from my MB886 using xda premium

[Q] Jellybean Update Fails!!

Whenever i try to do an OTA update, it downloads the new os but fails to install. It installs maybe 25% and then the android falls over with the red triangle. Keep it mind im new to the rooting scene so bare with me haha it just cuts back on and says update failed. WHAT DO I DO?!?!?!:crying:

What have you done to your phone? Typically OTA updates fail because you have modified/deleted/changed something on the phone that the update is trying to patch/update. If you don't know what you changed, it's hard to change it back to stock.
Use RSDlite and the JB fastboot files to flash your phone to stock Jellybean.
http://sbf.droid-developers.org/cdma_maserati/list.php
download the 4.1.2 version and search for RSDLite.

tcrews said:
What have you done to your phone? Typically OTA updates fail because you have modified/deleted/changed something on the phone that the update is trying to patch/update. If you don't know what you changed, it's hard to change it back to stock.
Use RSDlite and the JB fastboot files to flash your phone to stock Jellybean.
http://sbf.droid-developers.org/cdma_maserati/list.php
download the 4.1.2 version and search for RSDLite.
Click to expand...
Click to collapse
ok im trying it now but once again im new to this so i nmay need a few more instructions if i get stuck

downloads and rsd lite instruction in my list
sd_shadow's [Collection] of Links for Droid 4
Sent from my XT862 using xda premium

tcrews said:
What have you done to your phone? Typically OTA updates fail because you have modified/deleted/changed something on the phone that the update is trying to patch/update. If you don't know what you changed, it's hard to change it back to stock.
Use RSDlite and the JB fastboot files to flash your phone to stock Jellybean.
http://sbf.droid-developers.org/cdma_maserati/list.php
download the 4.1.2 version and search for RSDLite.
Click to expand...
Click to collapse
OMG YES!!! THANKS BRO!! WORKED PERFECTLY WITH NO PROBLEMS!!!!!!!! 1000x THANKS!!!!

[TOOL] Preparing for KitKat: Return to OTA Path from any ROM

This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!

The emergency utility was able to get me out of my soft brick. Thank you sir!

xt925
Does it works on xt925 ?
Thanks.

morcego.surf said:
Does it works on xt925 ?
Thanks.
Click to expand...
Click to collapse
It does, the emergency will flash an XT926 firmware, might have to change internal files I guess. It did got me out of a flash failure then could get back into fastboot and then flash my Telcel firmware for my XT925.

Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?

andreluigo said:
Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?
Click to expand...
Click to collapse
i have seen some lazy people, but i must say you take the cake.
this thread was 4 hole post long before you posted. 2 of which, asked and answered your exact first question.
no self respecting person is going to help you, when you cant even read a 4 post long thread before asking a question in it.

open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Just wanted to thank you for creating this tool, man. The Emergency Fix really saved my skin from a soft brick.

Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?

Nice to know it.

open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Hello,
Could you please write in big red letters in the beginning of your post : "ONLY FOR XT926, Do not use it for XT925" ?
Thank you

yoderz said:
Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?
Click to expand...
Click to collapse
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US

150kwh said:
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US
Click to expand...
Click to collapse
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!

yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
Thanks, worked for me now. Super happy to luck out on timing so I could get unlocked & root, wish I had seen this earlier.
..Now, if only their forum would validate me. (Maybe a week timeout??)

yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
so you have XT925 and this link helped you fix the install, and you're now on the official KK? does LTE and GSM work for you?