Related
I've had my lovely Xperia T for almost 2 weeks now and I've got a few concerns about the build quality and I'd like to see if I'm the only one with these issues:
1) I've noticed a few places on the back panel which exhibit a certain amount of creaking when I apply slight pressure. The worst areas are at the top left of the device behind the notification LED and between the SIM/Micro SD panel and the power button. This sound is quite irritating to me, especially for a brand new device.
2) There are a few areas along the edge of the matte black panel where the matte paint have been scratched off. Two of the corners have slight paint wear and around the headphone jack. Under the matte paint is a shiny black surface and it seems (so far) to be affecting the sharper edges or where the matte panel meets the metallic bezel. I'll try to take photos, but it's very small at the moment and might not be picked up due to it's dark colour.
Like I said, I've only had this phone less than a fortnight and it's already showing signs of wear even though I'm very careful with my devices.
Do any of you have any experiences like this?
Had mine for 2 and half weeks and have no sign of even being used. Don't have it in a case or anything. Where did you get it from.
Sent from my Xperia T using Tapatalk 2
Carphone Warehouse UK. I can live with these small paint chips but I'm concerned it'll only get worse with time
Sent from my LT30p using xda premium
daranx said:
I've had my lovely Xperia T for almost 2 weeks now and I've got a few concerns about the build quality and I'd like to see if I'm the only one with these issues:
1) I've noticed a few places on the back panel which exhibit a certain amount of creaking when I apply slight pressure. The worst areas are at the top left of the device behind the notification LED and between the SIM/Micro SD panel and the power button. This sound is quite irritating to me, especially for a brand new device.
2) There are a few areas along the edge of the matte black panel where the matte paint have been scratched off. Two of the corners have slight paint wear and around the headphone jack. Under the matte paint is a shiny black surface and it seems (so far) to be affecting the sharper edges or where the matte panel meets the metallic bezel. I'll try to take photos, but it's very small at the moment and might not be picked up due to it's dark colour.
Like I said, I've only had this phone less than a fortnight and it's already showing signs of wear even though I'm very careful with my devices.
Do any of you have any experiences like this?
Click to expand...
Click to collapse
Yep about to ask the same thing here... I cant believe that after 2 weeks of normal usage back matte covering is starting to peel at the corners. Its some kind of spray over a glossy plastic. Had galaxy ace for over a year and that stayed like new. Was very upset with this, so I ordered thin hard plastic case to cover that s***.
I got the phone from O2 ireland. James Bond and what not...but very disappointed as for the price.
Mine is exactly as you described it. Paint started to peel off at the top corners and the creak when pressed on the left corner. Really disappointed with Sony's built quality. Also the factory installed screen protector is showing some marks/light scratches. Does anyone know if it is possible to remove it as I would like to replace it with aftermarket ones. It seems to be glued to the screen.
Sent from my LT30p using Tapatalk 2
Protongti said:
Mine is exactly as you described it. Paint started to peel off at the top corners and the creak when pressed on the left corner. Really disappointed with Sony's built quality. Also the factory installed screen protector is showing some marks/light scratches. Does anyone know if it is possible to remove it as I would like to replace it with aftermarket ones. It seems to be glued to the screen.
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
I have not removed it from the xperia t yet, but I have removed it from my past xperia devices with no problem at all, but it does need a knack to take it of
Sent from my LT30p using xda premium
I've been reading into this 'shatter proof' layer and I'd be curious to find out if anyone here has removed theirs already? How does it affect dust/smudges etc? I'm naturally a bit hesitant to attack my phone just yet.
A note on the creaking case; I've found a rather unprofessional way to resolve it and it's reduced the noise significantly. It's possible to wedge a thin piece of paper between the back panel and the bezel, so I trimmed a piece small enough to go ask the way inside as far as it can go and gently pushed it out of sight using a craft knife. I used a post-it note and made a strip about 1mm wide and 5mm long and this seemed to do the job.
Sent from my LT30p using xda premium
Mine is exactly as you described it too.
daranx said:
I've been reading into this 'shatter proof' layer and I'd be curious to find out if anyone here has removed theirs already? How does it affect dust/smudges etc? I'm naturally a bit hesitant to attack my phone just yet.
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Not so sure its a "Shatter proof" layer or just to keep any broken glass stuck together so you dont cut yourself. It may give some protection against shattering but as I have said before, I removed it from my x10 and my neo with no adverse effects at all. Still to do it yet on my T. The reason eing, soon that layer gets scratched and dull, then I will take it off and have a brand new screen, similar pricicple to the rip offs the F1 drivers use on their visors.
Mine creaks as does my wife's Xperia T. Really annoying at first, but I got a hard case from Amazon UK and its stopped most of it.
Just removed my built-in/factory-fitted screen protector or whatever you want to call it :laugh:
Gave it a good clean as it was very slightly tacky and now it looks much slicker with the screen off... it seems to attract less dust and it isn't as smear-prone as before. I prefer the naked glass feel and it seems ever so slightly more responsive. Kinda glad I took the plunge after being too chicken to do it lol
Good for you!! Did mine also today using a credit card. Started at the top where the speaker is as it had the least resistance. Came off quite easily.
Sent from my LT30p using Tapatalk 2
Are the front-panel logos on the Xperia T on the glass itself or on the shatterproof sheet? In other words, did the logos come off along with the sheet?
LesPaulGuitarPlayer said:
Are the front-panel logos on the Xperia T on the glass itself or on the shatterproof sheet? In other words, did the logos come off along with the sheet?
Click to expand...
Click to collapse
The sony and xperia logo remain on the phone after I took off the factory fitted screen protector
Silver sticker around camera lens.
A week in with my Xperia T and the sticker around camera lens has peeled away. Anyone else have same problem? Perhaps I'll need silver model paint in it's place.
same problem
had my xperia T for about 2 months now, i have been very careful with it, it hasnt been droped, or against anything sharp, the only thing it has had is the pulling in and out of my pocket every time i use it, as any phone should be designed to do, and the paint on all 4 corners is wearing off, mainly on the left side, i belive this to be the angle that it usually is in my jeans pocket causing it to scratch.
as a matter of intrest whats the cover on warenty for something like this? because the manufacture could say its not their fault,
lordadamthird said:
had my xperia T for about 2 months now, i have been very careful with it, it hasnt been droped, or against anything sharp, the only thing it has had is the pulling in and out of my pocket every time i use it, as any phone should be designed to do, and the paint on all 4 corners is wearing off, mainly on the left side, i belive this to be the angle that it usually is in my jeans pocket causing it to scratch.
as a matter of intrest whats the cover on warenty for something like this? because the manufacture could say its not their fault,
Click to expand...
Click to collapse
There is already a thread about this problem, and yes, it's covered by warranty. See http://forum.xda-developers.com/showthread.php?t=2031472
Sent from my LT30p using xda app-developers app
I have bought some htc screen protectors for the htc one and cant get it on successfully without the bottom left or top right being
not flush to the phone (ive tried both ways)
Is the screen completely flat or is there a curve on it ?
has anyone managed to get a screen protector successfully attatched to the whole screen ?
Bugging hell out of me
help
thanks
I got close, no air bubbles what so ever except the only thing wrong is like you said, a small part of the protector doesnt stick to the screen on the top left of the screen :l its bugging me too. I might just rip it off and apply a new one, see if thats any better.
I might cut a bit off. I use HTC's cover one with red and grey so I can lose a bit
Glad it's not just me
Sent from my HTC One using xda premium
I got one on on properly, it's a spare from my One X, had to cut it a bit, but it is flat, no bubbles, doesn't cover the whole of the screen but covers the viewable screen and and leaves a gap of a couple of mm on each side.
Only problem with mine was when i went to take off the top part once it was fitted, the little pull piece came off! So i have the protective cover with its protective cover on it!:laugh:
Lol I'm going to try to cut one down slightly on the top left
Sent from my HTC One using xda premium
I'm leaving it on until my other protectors arrive, ordered the one's posted in another thread from here, X treme guard.
Wet application, so should be a lot easier to fit properly. Can't go wrong for £2.38 for 2 full protection (front and back) sets with free postage!
Do they post to the UK ? Presume so with you quoting £
Sent from my HTC One using xda premium
Are these wet or dry application protectors that you guys are having problems with?
mancuk29 said:
Do they post to the UK ? Presume so with you quoting £
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Yes, free postage to UK, will take about 3 weeks to get here but should give me a choice of options, either protective skin front and back if they look ok, or front protective skin and slim case for back. (ordered this one....Slim transparent case.
Theres quite a few different screen protectors on eBay I was looking at but want a perfect fit so looking at the official one I find screen protectors easy to apply, but people are having problems... thoughits not v clear whats the problem. Is it too big? or just bad application? Do you guys not align it prior to application to get an idea of the location and spacing needed?
Finally after a lot of trial and error managed to get one on properly this thing isn't coming off anytime soon
Sent from my HTC One using xda premium
I just noticed that the top edge of my screen isn't flush with the speaker. It's slightly raised and my finger sorta nicks it every time I swipe down. Is this a normal thing or a slight defect?
Sent from my HTCONE using xda premium
blackmamba0730 said:
I just noticed that the top edge of my screen isn't flush with the speaker. It's slightly raised and my finger sorta nicks it every time I swipe down. Is this a normal thing or a slight defect?
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
On the left side? If so I have the same thing.
Sent from my HTCONE using xda app-developers app
racrickey said:
On the left side? If so I have the same thing.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
It goes all the way across but yeah, more so on the left side for me too.
Sent from my HTCONE using xda premium
blackmamba0730 said:
I just noticed that the top edge of my screen isn't flush with the speaker. It's slightly raised and my finger sorta nicks it every time I swipe down. Is this a normal thing or a slight defect?
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
It seems that it is an issue. I have the silver and its very minimal and isn't an issue for me. I've since ordered the black as a replacement (wanted black in the first place) and is much worse and not acceptable to me, and the top speaker grill has 3 scratches on it so I called sprint and they are processing an order to replace the black.
blackmamba0730 said:
I just noticed that the top edge of my screen isn't flush with the speaker. It's slightly raised and my finger sorta nicks it every time I swipe down. Is this a normal thing or a slight defect?
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
I think its a lack of quality control. Some are flush, some aren't. If it bothers you, you may want to see about exchanging it and be sure to point out that you believe it is a manufacturer's defect (this will be key in avoiding the Sprint restocking fee assuming you bought from Sprint). Another thing to consider is that if you intend to put a screen protector on the device, screen protectors only cover the glass and not the speaker grills. Therefore the "nick" you describe will be present even if you have a flush screen because the screen protector will create a non-flush edge (and the "nick" will be even larger if you apply it to your current device).
batch problem maybe, lack of quality control.
I have the opposite issue at the bottom. The screen appears to be sunken in ever so slightly on the sides, while the speaker is flush with the sides and its flush at the top. I can feel it somewhat, but this is my second unit after a dead pixel replacement so I'm probably going to roll with it because the replacement could have bigger issues.
Just picked mine up today. Also noticed the left side of the screen isn't completely flush. The right side is a little closer, but the left side is the worst.
Sent from my HTCONE using xda premium
Got my Black replacement yesterday. Very slight raised glass on the top left but it's so minimal I'm not going to complain. I guess 3rd ones a charm. Just sucked dealing with Sprints telesales dept for 2 weeks trying to get a acceptable device.
I'm upset they rushed this phone out without thoroughly looking over It better.. I got the unflush screen, the gap up top.. argued with a sprint rep today about the gap and he opened a new HTC and it had the same problem.. so another rep said the gap is for better antenna signal lol
Sent from my HTCONE using Tapatalk 2
I have a black one. It is the same. Top left is noticeable. It isnt really bothering me till I get some scratches or nicks in the anodization if u know what I mean.
Sent from my HTCONE using xda app-developers app
My HTC one also has a raised screen on the entire top side but the bottom side is flush and everything else about the build quality is good. Eventually, it started bothering me and I ordered a replacement phone (wirefly.com and within my two weeks). The replacement phone had the same problem and it also had a huge gap between the aluminum and white plastic (which my original didn't have). So I ordered another replacement phone and this time the screen is raised on the left top side and lowered on the top right side meaning it's slanted in reference to the body of the phone. And there's a smaller gap between the aluminum and white plastic. I feel like this is going to be an endless cycle. What should I do?
I love the phone but this is bad quality control on HTC's side.
bhaktasa said:
My HTC one also has a raised screen on the entire top side but the bottom side is flush and everything else about the build quality is good. Eventually, it started bothering me and I ordered a replacement phone (wirefly.com and within my two weeks). The replacement phone had the same problem and it also had a huge gap between the aluminum and white plastic (which my original didn't have). So I ordered another replacement phone and this time the screen is raised on the left top side and lowered on the top right side meaning it's slanted in reference to the body of the phone. And there's a smaller gap between the aluminum and white plastic. I feel like this is going to be an endless cycle. What should I do?
I love the phone but this is bad quality control on HTC's side.
Click to expand...
Click to collapse
Right now, its pretty much luck of the draw as to if you can get a flush one or not. I guess it will also depend on how much patience you have as to how many times are you willing to do an exchange. Also, just realize that if you do finally get a unit with a flush screen, if you put a screen protector on it, it will only cover the glass and not the speaker grills. This means that the screen protector will then create an edge/lip at the top and bottom of the glass panel so again, it will not feel flush/smooth due to the screen protector.
Marty said:
Right now, its pretty much luck of the draw as to if you can get a flush one or not. I guess it will also depend on how much patience you have as to how many times are you willing to do an exchange. Also, just realize that if you do finally get a unit with a flush screen, if you put a screen protector on it, it will only cover the glass and not the speaker grills. This means that the screen protector will then create an edge/lip at the top and bottom of the glass panel so again, it will not feel flush/smooth due to the screen protector.
Click to expand...
Click to collapse
I don't use a screen protector so that's not a problem. I just want a good phone. How is that I can get three phones that look completely different in build from the same company? That just seems so odd to me and looks bad on HTC's side. I feel like if this is going to be an endless cycle, I might make the switch to a different phone.
bhaktasa said:
I don't use a screen protector so that's not a problem. I just want a good phone. How is that I can get three phones that look completely different in build from the same company? That just seems so odd to me and looks bad on HTC's side. I feel like if this is going to be an endless cycle, I might make the switch to a different phone.
Click to expand...
Click to collapse
It has been said that, that's why the black version' s release was delayed...to correct some minor design flaws, such as the ones you are having problems with....
Hope this helps...
w8setter said:
It has been said that, that's why the black version' s release was delayed...to correct some minor design flaws, such as the ones you are having problems with....
Hope this helps...
Click to expand...
Click to collapse
I've had three black HTC Ones and all had the same issue of the screen not being flush with the speaker grills. The issue was definitely not corrected in the black version.
---------- Post added at 10:00 AM ---------- Previous post was at 09:53 AM ----------
bhaktasa said:
I don't use a screen protector so that's not a problem. I just want a good phone. How is that I can get three phones that look completely different in build from the same company? That just seems so odd to me and looks bad on HTC's side. I feel like if this is going to be an endless cycle, I might make the switch to a different phone.
Click to expand...
Click to collapse
I also got frustrated with HTC quality control issues and some of the software choices they made in Sense 5 and so I am currently trying out a Galaxy S4 (haven't decided if I am going to keep it yet). Its not quite as snappy as the One but its acceptable to me as far as speed goes. No real quality control issues I've noticed and enjoying all the features Samsung has packed into this device. Both devices are great but each has its tradeoffs.
Hello everybody! I do not know where to begin but hope this forum.xda-developers.com will be useful for me. warmest regards from annonce escorte - www.goldendolls.com
Hey guys, I have a problem. I use on Gear screen protector from one of my previous phone One X (nilkin). I cut small square for the gear but after one hour I find out that the screen protector is no there .
So, I was thinking that the screen protector is maybe old and does not work, so yesterday I damaged my second original Samsung Galaxy Note3 screen protector and everything looks okay. But today the screen saver is not there anymore
Any solution? These screensaver should be really good, on my phone always work very well. I am really dissapointed because screen protector from Samsung was not cheap.
I also had the same problem, first I cut one from my old S2, shifted past a few hours. So I order two from a german suplier on ebay specific to the gear, and the same problem past few hours.
The problem is in the glass of the Gear being curved.
Sent from my SM-N9005 using XDA Premium 4 mobile app
I use:
http://www.liquid-kristall.com/en/home/1-0.html
may not be as effective as a plastic one, but it's invisible and it's working so far. Use ot on my note 3 as well.
Sent from my SM-N9005 using XDA Premium HD app
Allure40 said:
I also had the same problem, first I cut one from my old S2, shifted past a few hours. So I order two from a german suplier on ebay specific to the gear, and the same problem past few hours.
The problem is in the glass of the Gear being curved.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So are you without screen protector like me?
For now yes, but I think I will give a try to liquid-kristal, tks for sharing Thelestat . Should give some extra protection, with the advantage of being completely invisible.
I've heard some reports of gear's whith Glass scratched on the wrist. Must be due to some clothes we wear.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Dry screen protectors will fall off. It s meant for straight flush glass only. I just cut out any wet screen Protector and it works well for the glass and metal. Xtremeguard has 80% off their website.
Sent from my SM-P600 using Tapatalk
I purchased screen savers for my Gear from a company selling on Amazon.de. I have had no end of problems trying to convince this company that though the quality of the screen saver is great the point is it will not remain on the Gear, as people above have already mentioned, the body and glass are curved. What happens is the stiffness of the saver results in both ends of the saver sticking up, getting caught on clothes and coming away.
The only solution I can think of is for a manufacturer to produce a thinner protector that will bend to shape and remain stuck to the screen?
The company I purchased from requested photos and goodness knows what. I just filled a claim with Amazon.de and got my money back. I am not going to do the R&D for the company! I bought three of them as in general screen savers can, on times, be a devil to fit.
The glass will and does scratch so take care.
Kind regards.
A good screen protector thread: http://forum.xda-developers.com/showthread.php?p=46707863
Screen Protectors?
Sent from my SM-N900T using xda app-developers app
thelestat said:
I use:
http://www.liquid-kristall.com/en/home/1-0.html
may not be as effective as a plastic one, but it's invisible and it's working so far. Use ot on my note 3 as well.
Sent from my SM-N9005 using XDA Premium HD app
Click to expand...
Click to collapse
Did you apply to the gear camera and the metal frame as well?
I did apply to the camera, did not think to do the metal frame.
If your cutting it out of another type, I found you need to round the edges. the corners that lift up, if the are sharp, will get caught on everything
thelestat said:
I did apply to the camera, did not think to do the metal frame.
Click to expand...
Click to collapse
Any difference to the pictures? as in blurr or smoky? Cos the lens is plastic...not sure if it makes a difference.
I figured i'll be using the Liquid Kristall for the gear.
Since after applying you can't see a layer on the screen....makes one wonder if there is actually any protection on the screen
saw these guys on facebook (sponsored post) - looks interesting but i cant find any reviews of their products on youtube etc - no influences or anything!
https://youtu.be/5ZaD7FmWQS4
https://www.bare-cases.com/pages/pane-samsung
https://www.bare-cases.com/collections/screen-protectors/products/bare-pane-for-galaxy-note-8
they say its compatible with most cases as long as the lip isnt too high
anyone have any experience with them or any tempered glass they'd recommend (especially one thats compatible with the ringke fusion)
Well, looks promissing!
Looks exactly like this one.
https://www.amazon.com/gp/aw/d/B077GSJ55T?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
I'm convinced there is only 2 or 3 manufacturers and they just put the glass in different packaging.
Sent from my SM-N950U using Tapatalk
dschachm said:
Looks exactly like this one.
https://www.amazon.com/gp/aw/d/B077GSJ55T?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
I'm convinced there is only 2 or 3 manufacturers and they just put the glass in different packaging.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
LOL
Ugh, I just want a FULL screen protector with FULL ADHESIVE! Why is that too much to freaking ask for?!!!
Jammol said:
Ugh, I just want a FULL screen protector with FULL ADHESIVE! Why is that too much to freaking ask for?!!!
Click to expand...
Click to collapse
I don't think we'll ever seen one for the Note 8.
Sent from my SM-N950U using Tapatalk
Zaggs tempered glass revision 2 has been on the money. I've placed this thing on twice. Once when I got it and, the second time, I removed it from my old unit after a screen burn-in replacement, and place it onto my new unit. No air bubbles and the glass feels high quality, comparable to Whitestone sans the complex installation. It sits on the screen only slightly curving to the edge, and it does sit flush without interfering with the edge tab if I choose to use it. It is quite expensive ($50) but imho, it's quite worth it after successful installation. Highly recommend it!
princeasi said:
Zaggs tempered glass revision 2 has been on the money. I've placed this thing on twice. Once when I got it and, the second time, I removed it from my old unit after a screen burn-in replacement, and place it onto my new unit. No air bubbles and the glass feels high quality, comparable to Whitestone sans the complex installation. It sits on the screen only slightly curving to the edge, and it does sit flush without interfering with the edge tab if I choose to use it. It is quite expensive ($50) but imho, it's quite worth it after successful installation. Highly recommend it!
Click to expand...
Click to collapse
While I agree with you that it goes on nicely you didn't mention that since it doesn't cover as much screen as other protectors and also has black side bars you get a weird effect where there's screen, black bar, rest of the screen which is quite annoying.
Link575 said:
While I agree with you that it goes on nicely you didn't mention that since it doesn't cover as much screen as other protectors and also has black side bars you get a weird effect where there's screen, black bar, rest of the screen which is quite annoying.
Click to expand...
Click to collapse
yes there are black borders around SP which the top and bottom part aligns with the phone borders, so no issues there. Depending on an individual's taste, the side borders may be of concern. However, I made no mention of any weird effects as a result from the blk borders and / or the edges not being fully covered because I haven't experienced any negative effects thru general use of the phone. I must also mention, that in some apps, i.e. flipboard the first letters of words that display close to the edge of the screen may be partially blocked by the SP borders. But for me that's not a problem, as i don't experience this issue with most of the apps I use on a daily basis.
princeasi said:
yes there are black borders around SP which the top and bottom part aligns with the phone borders, so no issues there. Depending on an individual's taste, the side borders may be of concern. However, I made no mention of any weird effects as a result from the blk borders and / or the edges not being fully covered because I haven't experienced any negative effects thru general use of the phone. I must also mention, that in some apps, i.e. flipboard the first letters of words that display close to the edge of the screen may be partially blocked by the SP borders. But for me that's not a problem, as i don't experience this issue with most of the apps I use on a daily basis.
Click to expand...
Click to collapse
No I agree with you, I just thought people should know in case they're looking to purchase it. Like you said, 50 dollars is a lot for a SP especially if you didn't know the bars did that and it bothered you. I'll be keeping mine on until something better comes along, if ever.
Link575 said:
No I agree with you, I just thought people should know in case they're looking to purchase it. Like you said, 50 dollars is a lot for a SP especially if you didn't know the bars did that and it bothered you. I'll be keeping mine on until something better comes along, if ever.
Click to expand...
Click to collapse
Agreed!
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
MACHEK said:
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
Click to expand...
Click to collapse
Go ahead and buy it and return feedback to us.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
Go ahead and buy it and return feedback to us.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
i have tried these, good product in terms of clarity and touch sensitivity. the issue i had was that the vertical edges would easily crack with a bit of pressure as they dont seat on the screen as well as they should.
my current solution for using these is to remove the adhesive backing and reapply with loca adhesiveand cure with uv light.
itoYo said:
i have tried these, good product in terms of clarity and touch sensitivity. the issue i had was that the vertical edges would easily crack with a bit of pressure as they dont seat on the screen as well as they should.
my current solution for using these is to remove the adhesive backing and reapply with loca adhesiveand cure with uv light.
Click to expand...
Click to collapse
Ugh sounds like too much work lol
MACHEK said:
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
Click to expand...
Click to collapse
Tested these a month ago. Cracked two working out bubbles. Glass quality is very bad. One cracked on the right side. The other on the bottom using a fingernail to work out a bubble. No chance that this is good 9h tempered glass. Opened a dispute and got both refunded. My opinion, not recommended.
Not recommended too, to narrow, covering edges with black bars completely.
http://s.aliexpress.com/rEZfMny6?fromSns=Copy to Clipboard
Not recommended too, same bad glass like the one posted and cutting display on the bottom
BBSW
http://s.aliexpress.com/BNjmaqIR?fromSns=Copy to Clipboard
Gesendet von meinem SM-N950F mit Tapatalk
ok so i purchased one and it arrived yesterday
while applying it i got some dust stuck under the protector, tried to take it out but it wouldnt move
applied it anyway and its pretty good except for the air bubbles near the curved sides of the screen (and the dust particles)
the protector is really fragile too, it chipped and cracked a corner while working out the bubbles - others have complained that theirs cracked for no reason
other than that it actually feels amazing and is compatible with the ringke fusion
ive contacted support, hopefully theyll send me out a new one
I wonder why they disabled comments in their video?
What's the best between this one and Dome Glas ?
I don't like the cut around speaker - face camera ...
A real full cover for front face is the most beautiful but may be not very good for quality of face camera ???