HI
I HAVE DESIRE C
but cid is htc__038
what is this cid?
thanks
I think that cid is HTC India. If you have a software number with x.xx.720.x then its indian.
If you need a RUU for that cid I don't think you can find one as i tryed to find it too(i have an indian cid too...) but with no luck...
If you are rooted you can install one of the working roms for the phone as it ignore the cid.
Related
Hello,
I just bought HTC One (in retail, without operator logo). I just noticed following in my Kernel information :
3.4.10-gb91aaea
[email protected] #1
SMP PREEMPT
Does this mean that device is rooted? I noticed Vodafone logo when turning on device. Everything works fine, I just want to be sure that my device will be able to receive all updates from HTC and not be locked.
Thanks in advance for answer.
Nope it isn't. Try the Root Checker app in the Play Store to confirm
Check CID using CID getter from play store. So that you can know from will u get the updates.
Sent from my iPad using Tapatalk HD
Thanks for answers. Just one more question : Can I install stock HTC WWE ROM on my device? To remove this Vodafon stuff and have clean stock ROM?
Thanks again,
You'd have to unlock your bootloader and a custom recovery would needed too, then you're free to install any roms
Sent from my HTC One using xda app-developers app
kurby said:
You'd have to unlock your bootloader and a custom recovery would needed too, then you're free to install any roms
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
To the OP you have to do what kurby suggested but remember that you cannot use any RUU except the Vodafone one. If however you are just wanting to install the actual ROM then you can do it after unlocking the bootloader and flashing a custom recovery.
Thanks guys. Can you please clarify this a little bit more as I'm new to this : You say that if I want to install original HTC WWE ROM instead of Vodafon version, I must unlock bootloader and then find RUU from Vodafone? Is that right? Do you maybe have a link for a RUU for Vodafone version of HTC One?
You can only install RUU to the same CID region. Looks like your phone is not a retail non branded phone. You will not able to get updates from HTC even with the stock rom installed because it will check if the CID is the same region. You can unlock bootload, install a custom recovery then can flash any custom rom but not RUU.
Sent from my HTC One using xda app-developers app
damird said:
Thanks guys. Can you please clarify this a little bit more as I'm new to this : You say that if I want to install original HTC WWE ROM instead of Vodafon version, I must unlock bootloader and then find RUU from Vodafone? Is that right? Do you maybe have a link for a RUU for Vodafone version of HTC One?
Click to expand...
Click to collapse
As mentioned before RUU is CID specific. So if your CID is not in the list of the RUU, the RUU won't flash your phone. For example if I have a Vodafone branded HTC One and I want to debrand it to get rid of the Vodafone stuff that's installed on my HTC One. I simply can't just use the stock 1.29.401.16 UK RUU because the CID list for the UK ROM(RUU) are as follows:
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__A07
cidnum: HTC__J15
cidnum: HTC__016
Now if my Vodafone branded HTC One has a CID for example VODA001, then when I try to run the 1.29.401.16 RUU it will fail. Because my CID is not in that list. But if you unlock the bootloader and flash a custom recovery and then flash this stock ROM that mike1986. posted http://forum.xda-developers.com/showthread.php?t=2224752 that will work.
But bear in mind just because you have used that stock ROM that mike1986. posted it doesn't mean you can install OTA updates from that region. Because the next update for example is 1.29.401.20 the OTA will look for the CID in the list I posted. And since your CID is techinically still VODA001 the OTA update will not install.
Now when we are able to change the CID on the HTC One then you can use any RUU you wish as long as you have a matching CID or a SuperCID.
Thanks very much guys! I understand now.
HTC Europe 1.28.401.7 or HTC Europe 1.20.401.1 RUU
WHICH IS BEST FOR UK usage on cid htc__001 on sim free
and which gets updates first please
geordieboy2011 said:
HTC Europe 1.28.401.7 or HTC Europe 1.20.401.1 RUU
WHICH IS BEST FOR UK usage on cid htc__001 on sim free
and which gets updates first please
Click to expand...
Click to collapse
Hi,
The RUU HTC Europe 1.28.401.7 is best for UK. Install this RUU from the boot loader and change the CID of your phone to HTC_001 if it's on a different carrier. The OTA update works on this RUU and will update it to 1.29XXXXX.
modandroidgoogle said:
Hi,
The RUU HTC Europe 1.28.401.7 is best for UK. Install this RUU from the boot loader and change the CID of your phone to HTC_001 if it's on a different carrier. The OTA update works on this RUU and will update it to 1.29XXXXX.
Click to expand...
Click to collapse
Are you sure? I briefly tried to restore to stock using this, and others, all I got was an error when it tried to flash ... Wouldn't let me install because the version is older than the current UK Sim Free version I'm on ... I might be wrong as I know jack **** about S-Off and changing CID's etc but I know that on my UK Sim Free One, I couldn't restore from any of the RUU's available currently as there wasn't one that matched my version.
I'm on 1.29.401.13 btw ... Oh, still no update btw to 4.2.2 lol
AllAboutTheCore said:
Are you sure? I briefly tried to restore to stock using this, and others, all I got was an error when it tried to flash ... Wouldn't let me install because the version is older than the current UK Sim Free version I'm on ... I might be wrong as I know jack **** about S-Off and changing CID's etc but I know that on my UK Sim Free One, I couldn't restore from any of the RUU's available currently as there wasn't one that matched my version.
I'm on 1.29.401.13 btw ... Oh, still no update btw to 4.2.2 lol
Click to expand...
Click to collapse
Is your device on s-off and is the bootloader unlocked. Your device has to have s-off before you can successfully flash any version of any stock ruu . You will need to change the Cid as well to 11111111 before you can flash any version.
Mine was branded from 3 uk. After setting the device to s-off using instructions from the XDA forum, the bootloader was also unlocked. I didnt need to go through HTC to unlock the bootloader.
I downloaded the european wwe version and the asia wwe versions of the RUU , changed the CID from H3G_001 to 11111111 for all versions and was able to flash these roms to the phone . It even lets you flash a lower version. I then changed the CID FROM 11111111 to HTC_001 for europe and was able to download OTA updates. I even flashed the Asia version and this worked as well with the asia wwe cid.you can only flash these suceessfully if the device is s-off, bootloader unlocked and cid changed to the universal id which is 11111111. Instructiions can be found on this forum.
modandroidgoogle said:
Is your device on s-off and is the bootloader unlocked. Your device has to have s-off before you can successfully flash any version of any stock ruu . You will need to change the Cid as well to 11111111 before you can flash any version.
Mine was branded from 3 uk. After setting the device to s-off using instructions from the XDA forum, the bootloader was also unlocked. I didnt need to go through HTC to unlock the bootloader.
I downloaded the european wwe version and the asia wwe versions of the RUU , changed the CID from H3G_001 to 11111111 for all versions and was able to flash these roms to the phone . It even lets you flash a lower version. I then changed the CID FROM 11111111 to HTC_001 for europe and was able to download OTA updates. I even flashed the Asia version and this worked as well with the asia wwe cid.you can only flash these suceessfully if the device is s-off, bootloader unlocked and cid changed to the universal id which is 11111111. Instructiions can be found on this forum.
Click to expand...
Click to collapse
Cool ... Like I said, I wasn't sure, my phone is S-On btw so that would explain it lol
AllAboutTheCore said:
Cool ... Like I said, I wasn't sure, my phone is S-On btw so that would explain it lol
Click to expand...
Click to collapse
You don't need to s-off to downgrade you can use the toolbox software to run mainver error check (needs root) to trick the phone into thinking its on 1.00 of hoot then you can downgrade with the RUU.
daleski75 said:
You don't need to s-off to downgrade you can use the toolbox software to run mainver error check (needs root) to trick the phone into thinking its on 1.00 of hoot then you can downgrade with the RUU.
Click to expand...
Click to collapse
Always good to learn something! .. I'm on stock, unrooted at mo though and have no plans to change that ... Yet lol
HI EVERYONE HERE,may anyone help me how to know which one is htc one international or sprint...at&t....?i want to get international htc one but i afraid i buy wrong.i want to know the htc one international model number.
thanks and so sorry for my english.
noriya said:
HI EVERYONE HERE,may anyone help me how to know which one is htc one international or sprint...at&t....?i want to get international htc one but i afraid i buy wrong.i want to know the htc one international model number.
thanks and so sorry for my english.
Click to expand...
Click to collapse
There is a listing of the One variants and model numbers here here ..... the model you're looking for will be the UL variant model code 801n
Follow this thread and you can change your model id (MID) to the international version and then install the RUU 1.28.401.7 (http://bugsylawson.com/files/file/1...13323127-1031113105-release-310878-signedexe/) and then receive the updates via OTA to the latest 2.24.401.1 first CID HTC__001 then change to HTC__Y13 for the last one.
http://forum.xda-developers.com/showthread.php?p=42542680
To know your model ID bout in to bootloader and fastboot then connect USB to your PC and run command:
fastboot getvar all
This will give you your CID, MID and main-version numbers. Don't post your iemi or serial numbers
Sent with desire from My One
angusc said:
Follow this thread and you can change your model id (MID) to the international version and then install the RUU 1.28.401.7 (http://bugsylawson.com/files/file/1...13323127-1031113105-release-310878-signedexe/) and then receive the updates via OTA to the latest 2.24.401.1 first CID HTC__001 then change to HTC__Y13 for the last one.
http://forum.xda-developers.com/showthread.php?p=42542680
To know your model ID bout in to bootloader and fastboot then connect USB to your PC and run command:
fastboot getvar all
This will give you your CID, MID and main-version numbers. Don't post your iemi or serial numbers
Sent with desire from My One
Click to expand...
Click to collapse
Would that work to change my CID From Optus_001 (stock CID) and super CID it and would that allow sprint roms to work on my phone? its an m7_ul
Wanting to know because there is a sprint MIUI rom from an actual miui dev I want to try and see if It works. Since all CM roms wont work on my device without getting sleep of death.
To install custom rooms you only need to HTCdev unlock, make a stock backup of your existing Rom, install a custom recovery and then flash the custom Rom.
Read this first post carefully a few times then decide if you want to do it:
http://forum.xda-developers.com/showthread.php?p=41076144
Sent with desire from My One
Hi everybody I restored my htc one to stock by ruu.exe for European models because my phone is with spain vodafone and changed my cid to supercid and restored successfully. After that i changed my cid to original one Vodap304. But cid getter is showing vodap304 at top and htc_001 is below as main cid, can i get ota or i will brick my phone or do i need to change vodap304 to htc_001.please help
Hi to all...I wanted to know if there's an RUU for the cid HTC__405, an Italian model.
I've found this:
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Is that correct?
I'm S-ON and with boot 1.56...just wanted to return stock when the official Sense 6 update will come...I'll can do it with this exe file on Windows 7?
Or I can do it in an alternative way?
Thanks in advance for any answer!!!