DBACases Complete Ultra Now Available. - Galaxy Note II Accessories

www.dbacases.com
I was moseying around and saw these were now available for sale. Everyone's been waiting. Glad they are ready! They look awesome.
The whole inventory wasn't available yet, but it shows the TPU's are in stock and about half of the Ultra Completes.

What's so good about these cases?

DarkManX4lf said:
What's so good about these cases?
Click to expand...
Click to collapse
You didn't hear? They add 20% to your battery life!
.
.
.
.
.
Kidding aside, those are supposed to be of a very high quality material and fitment. The guy behind these (Scott) put a lot of time and effort into research to make a perfect case with a slim fitment and drop protection. Based on reputation of their S3 cases this should be a good one as well. Will know more for sure once I have a chance to review it.

vectron said:
You didn't hear? They add 20% to your battery life!
.
.
.
.
.
Kidding aside, those are supposed to be of a very high quality material and fitment. The guy behind these (Scott) put a lot of time and effort into research to make a perfect case with a slim fitment and drop protection. Based on reputation of their S3 cases this should be a good one as well. Will know more for sure once I have a chance to review it.
Click to expand...
Click to collapse
Looks like a good case. Best thing about it is the color combinations. Other than that it doesn't look like it's much better than other tpu cases like from cruzerlite.

I just ordered some of these cases and will post photos as soon as I get the cases.
Sent from my SAMSUNG-SGH-I317 using xda premium

DarkManX4lf said:
Looks like a good case. Best thing about it is the color combinations. Other than that it doesn't look like it's much better than other tpu cases like from cruzerlite.
Click to expand...
Click to collapse
Thanks for your great observation. I think you missed that it's a 2 piece case.
The Ultra has a hard outer shell made of polycarbonate and some other voodoo. This outer shell offers far superior protection than just TPU alone.
If my girlfriend's S3 survived multiple drops on concrete, I'd say it's much more durable than just TPU.

chrischoi said:
Thanks for your great observation. I think you missed that it's a 2 piece case.
The Ultra has a hard outer shell made of polycarbonate and some other voodoo. This outer shell offers far superior protection than just TPU alone.
If my girlfriend's S3 survived multiple drops on concrete, I'd say it's much more durable than just TPU.
Click to expand...
Click to collapse
Just my opinion. I see that it's a two piece case. I've dropped my phone with a tpu case on concrete. Never had any damage.
Anyway good luck with these.

DarkManX4lf said:
Just my opinion. I see that it's a two piece case. I've dropped my phone with a tpu case on concrete. Never had any damage.
Anyway good luck with these.
Click to expand...
Click to collapse
That's cause you are in NYC and you guys got smoother concrete. Here in Jersey we got swiss cheese potholes lol!!
But in all seriousness, you guys know I reviewed a ton of accessories on this forum. Also, I heard a healthy buzz about these cases for a few months now. Obviously that got my interest considering Scott has posted in this forum before in great details about process of his material selection, fitment testing, and all other stuff that goes along with it. I also heard a lot of work went into packaging details as well. That got my curiosity for sure. Once I receive it, I will do my usual detailed review and give you my honest opinion about it.

The polycarb he uses is actually flexible. It disperses the shock better. You can actually fold rhe PC part in half without cracking it. It's not standard PC I forget what its technical name is but it's very close in chemical make up to the PC they use in fighter jet cockpits. It's almost like a polycarbonfiber instead of carbonate. The fit is also very nice for the price. Theres no play in the case when it's installed and the tpu acts as a shock absorber between the PC and device. They have the fit and slimness of just a plain tpu but the protection of an otterbox defender minus the built in SP.
☆SoA: Son's of Android™☆
I like to break stuff!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

-EViL-KoNCEPTz- said:
The polycarb he uses is actually flexible. It disperses the shock better. You can actually fold rhe PC part in half without cracking it. It's not standard PC I forget what its technical name is but it's very close in chemical make up to the PC they use in fighter jet cockpits. It's almost like a polycarbonfiber instead of carbonate. The fit is also very nice for the price. Theres no play in the case when it's installed and the tpu acts as a shock absorber between the PC and device. They have the fit and slimness of just a plain tpu but the protection of an otterbox defender minus the built in SP.
☆SoA: Son's of Android™☆
I like to break stuff!
Click to expand...
Click to collapse
My girlfriend loves to drop her phone. The hard shell is the stuff in **** pits like you said and also in bullet proof glass / plastic.
I took the shell from the one my girlfriend dropped and I flexed it. Let's just say it didn't just break like other cases. I gave it a bit of a work out.

chrischoi said:
My girlfriend loves to drop her phone. The hard shell is the stuff in **** pits like you said and also in bullet proof glass / plastic.
I took the shell from the one my girlfriend dropped and I flexed it. Let's just say it didn't just break like other cases. I gave it a bit of a work out.
Click to expand...
Click to collapse
Yeah its supposed to be super durable. I've snapped plenty of cheap PC cases just trying to pull em off when they're really tight and a piece snaps right off
☆SoA: Son's of Android™☆
I like to break stuff!

For those that have ordered, I'm curious what color your phone is and what DBA combination did you get?
I have not ordered as of yet but am considering getting a white and blue set up for my white Note 2. I prefer a blue tpu with white polycarbonate piece but don't see the blue tpu on the website.
Sent from my SPH-L710 using xda app-developers app

What I hate most about a lot of tpu cases is the flimsy sides, is this one of those? Urban armor gear did it right, they made the top and bottom part so thick that it feels solid.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

majorbgss said:
What I hate most about a lot of tpu cases is the flimsy sides, is this one of those? Urban armor gear did it right, they made the top and bottom part so thick that it feels solid.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
In my opinion the sides of the tpu are very thick and ridged. It doesn't have the sides that will pull away from the phone. I will have cases on 5-3 and will post photos then.
Sent from my SAMSUNG-SGH-I337 using xda premium

ibleedbloo said:
For those that have ordered, I'm curious what color your phone is and what DBA combination did you get?
I have not ordered as of yet but am considering getting a white and blue set up for my white Note 2. I prefer a blue tpu with white polycarbonate piece but don't see the blue tpu on the website.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I ordered black and blue...was the most manly color in my opinion...I heard from Scott that it looks awesome...and also black on black so I might order a black poly when it comes available... Also the tpu is not flimsy at all...I got my fiancé one for her iPhone and the thing is top notch...Scott chooses the best materials for his products there is no need to worry about ordering his stuff
Sent from my SCH-I605 using xda app-developers app

I'm going to order the Black/Red Complete and an extra White PC once they finally come in stock. So excited to finally have this on my phone!!

The case doesn't have the flimsy crap sides that bow out. The ones I've had for our S3's have been solid all the way through.

Still trying to justify the $27...Hopefully there will be some reviews for it soon.

DarkManX4lf said:
Still trying to justify the $27...Hopefully there will be some reviews for it soon.
Click to expand...
Click to collapse
Because it is the highest best material a case can be made of IMO lol... At least they say it is!
Sent from my SCH-I605 using xda app-developers app

pschatz12 said:
Because it is the highest best material a case can be made of IMO lol... At least they say it is!
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Hope so. It's between this case and UAG right now.... Waiting for reviews....

Related

[REVIEW] Nillkin Hard Case

Today I took receipt of 2 Nillkin Hard Cases for the GT-N7100 Galaxy Note (One brown, one Red.)
I bought them from eBay for around £6 each delivered, the quality is surprisingly good, I wasn't keen on having a TPU or Soft Silicone case, or the flip case that I had for my original Note. So I thought I'd give this one a try.
You can see that it comes well packaged, not just in an envelope as is usually the case from Chinese suppliers of such products.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It also includes a screen protector, I've not yet fitted that, as I already have one fitted that's in good condition.
As you can see from the next set of photos, it doesn't really add a great deal of bulk, which is another reason I didn't want a TPU or Silicon case.
Granted I can't see it protecting the phone from a massive fall, but I wanted to keep the svelte lines as much as I could, whilst adding some grip, which it does nicely with the texture that is on the under side.
The fit is really snug, I had reservations at first, but once it's fitted it doesn't move at all, so I have no worries about it slipping off.
All-in-all I think it's a really good product, it adds protection from scratches for most of the phone, whilst not being too bulky, just enough thickness to save the camera lens from getting scratched when you put the phone down.
So if you're looking for a case and have similar requirements to my own, consider giving this one a try.
thank you for your return
Excellent review and photos,its a shame the case doesn't cover the top and bottom of the phone .
i just made a thread about this, but yours is nicer so....
I didn't like the fit at ALL until I just removed the back cover from my note 2 completely.
I don't really care about NFC so I'm okay with this. I like having a bit more lip too.
I find a couple of the edges a bit sharp. meaning if I hold the phone in landscape, my index fingers get scraped a little bit by the case edges.
I might sand them down or something.
The texture on the case is quite nice - pretty subtle but noticable when you hold it.
MISSDIVA said:
Excellent review and photos,its a shame the case doesn't cover the top and bottom of the phone .
Click to expand...
Click to collapse
I know what you mean, but at least it looks uniform all the way around, I had a couple of flip cases, one made by a company called Tenda, great case and had a similar hard back to it, that case did cover all the edges... except for one corner, it would have looked a bit daft if it didn't have the flip screen cover.
But because of the material, I think it would be a nightmare taking it off, if it did cover every edge, as because it's really stiff, you need some leverage when you do want to remove it.
ChodTheWacko said:
i just made a thread about this, but yours is nicer so....
I didn't like the fit at ALL until I just removed the back cover from my note 2 completely.
I don't really care about NFC so I'm okay with this. I like having a bit more lip too.
I find a couple of the edges a bit sharp. meaning if I hold the phone in landscape, my index fingers get scraped a little bit by the case edges.
I might sand them down or something.
The texture on the case is quite nice - pretty subtle but noticable when you hold it.
Click to expand...
Click to collapse
It might just be the batch you've got perhaps, I've just been around both cases, both on and off, and there are no sharp edges, in your case, a small nail file or wet'n'dry should do the trick.
I think I know what you mean about the fit, I too was a bit cautious as it "almost" sits flush with the screen, but there is a bit of a lip and I've shaken the hell out it and it's going know where haha.
Sent from my GT-N7100 using Tapatalk 2
I get one. Very slim charming
Sent from my GT-N7100 using xda premium
I received my black one yesterday. Yeah, it stinks that the top and bottom are exposed, otherwise it would be perfect.
If you're looking for the lightest, minimalist case, this is the one.
Honestly, you really can't go wrong with a product that says "SUPER COOL" on the packaging. :laugh:
uchosen said:
I received my black one yesterday. Yeah, it stinks that the top and bottom are exposed, otherwise it would be perfect.
If you're looking for the lightest, minimalist case, this is the one.
Honestly, you really can't go wrong with a product that says "SUPER COOL" on the packaging. :laugh:
Click to expand...
Click to collapse
Haha, yeah that made me chuckle when I read that. Lol.
Sent from my GT-N7100 using Tapatalk 2
RavenY2K3 said:
Today I took receipt of 2 Nillkin Hard Cases for the GT-N7100 Galaxy Note (One brown, one Red.)
I bought them from eBay for around £6 each delivered, the quality is surprisingly good, I wasn't keen on having a TPU or Soft Silicone case, or the flip case that I had for my original Note. So I thought I'd give this one a try.
You can see that it comes well packaged, not just in an envelope as is usually the case from Chinese suppliers of such products.
All-in-all I think it's a really good product, it adds protection from scratches for most of the phone, whilst not being too bulky, just enough thickness to save the camera lens from getting scratched when you put the phone down.
So if you're looking for a case and have similar requirements to my own, consider giving this one a try.
Click to expand...
Click to collapse
Thanks. I am expecting the black one. I love the texture look. I am hoping it feels like it looks.
Be careful though. It looks like you already have some scratches.
Sent from my SGH-T889 using xda app-developers app
Tweh said:
Thanks. I am expecting the black one. I love the texture look. I am hoping it feels like it looks.
Be careful though. It looks like you already have some scratches.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
There's a screen protector on my beast, they arrived 4 days before the phone haha
That's a really nice case you have there. I envy your adventurous nature in going for red, I'd be more conservative and go for grey or black!
Anyhow I was also looking at this similar case and thought it offers a little more protection around the top / bottom. Any opinions?
Sent from my Nexus One using xda app-developers app
cpm said:
That's a really nice case you have there. I envy your adventurous nature in going for red, I'd be more conservative and go for grey or black!
Anyhow I was also looking at this similar case and thought it offers a little more protection around the top / bottom. Any opinions?
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
I'd be more inclined to go for the one you've found, for that added protection, I have ordered a aluminum bumper and a flip case which I'll probably post a review about, unless someone already has.
I might buy the one you've posted about too lol.
Yeah I'm on the case hunt too. Already bought the S-Line with kickstand just yesterday. I also really like the look of the one I linked to above. I'm interested in this flip cover too , which I really like for its corner protection - should be protective enough for most falls and no magnet involved to interfere with the s-pen.
And worst of all, I don't even own a Note 2 yet. Crazy or what?!
Anyhow apologies for hijacking your useful review thread
Sent from my Nexus One using xda app-developers app
I have one. I think its more slippery than the back Dolf the phone itself!
Sent from my SGH-T889 using xda app-developers app
I ordered one a few days ago. Can you tell me approximately how long it took for delivery?
Thanks
ekerbuddyeker said:
I have one. I think its more slippery than the back Dolf the phone itself!
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Which case is that then as there's a few mentioned above? I'll stay away from that one once I know as the phone is slippery enough as is (from trying out in store).
Sent from my Nexus One using xda app-developers app
RavenY2K3 said:
Today I took receipt of 2 Nillkin Hard Cases for the GT-N7100 Galaxy Note (One brown, one Red.)
I bought them from eBay for around £6 each delivered, the quality is surprisingly good, I wasn't keen on having a TPU or Soft Silicone case, or the flip case that I had for my original Note. So I thought I'd give this one a try.
Click to expand...
Click to collapse
White ones look nice too, but its just hard to maintain the white from turning dull color. If you have time, please post some pics of your brown case
Raven
Who was your seller on ebay?
MISSDIVA said:
Raven
Who was your seller on ebay?
Click to expand...
Click to collapse
Original_Digi88 was the seller I bought mine from
http://www.ebay.co.uk/itm/190729775236?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D190729775236%26_rdc%3D1
For those interested, I have reviewed another product.
http://forum.xda-developers.com/showthread.php?t=1975267
nice
i wish they had it in malaysia

Official Samsung TPU Case (Lots of pics!)

I really like these cases.
Here are some pictures (sorry, I took them in low light with the Galaxy S3):
I got the black and white cases, I personally like the white one more, but the black is also nice.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case is very sturdy and very nice to the touch. It's kind of slippery, but it feels fine in the hand.
It doesn't hinder the Spen. I've had other cases for this note, and the original, and the Spen on some cases were impossible to take out
Buttons are easily accessible and they're raised! FINALLY! They're easy and clicky! Also, it has a charm loop or a lanyard loop.
Here are some pics of the black one
The cases are easy to apply and the phone basically snaps on, it's not a tight tight fit, but it's not going to come out on its own. It's snug in there, but you don't feel bad having to press really hard or anything like that to get the case off. It basically just comes out with ease.
These cases are going to be my daily drivers for a while, until something better comes along. I usually like Samsung cases. I love the S3 cases and now the Note 2 cases. The only thing I wish it had was the silicon flap to cover the USB or the headphone jack (or both!) to not let any dust in.
Hit thanks if this review has helped you or you just like the pics Or if you'd like me to continue reviewing cases I buy .
Thanks for reading!
Regards,
ZKYEVOLVED
Update: I have been getting a lot of PMs about where I got the case. I finally ordered it from here: CLICK, 15 euros.
On another thread (this thread) I had found some ebay links, and then I found some stores
All you need to do is search for the model number of the one you're looking for:
Black case: EFC-1J9BBEG
White case: EFC-1J9BWE
Pink case: I don't remember sorry!
Hope I've helped!
UPDATE: Today is my birthday, and last night I went out with some friends and I used this case. Oh my... The dark photos were ... let's just say that they could be used for Paranormal Activity 10! The white case gives off a reflection! Check this out. I don't recommend the white case if you're going to take night time pictures with flash. Without flash the pictures were fine, but the white edges of the case reflect and kind of destroyed the pictures. The reflection kind of threw off the rest of the picture (exposure, white balance, not to mention the spirit appearing at the bottom of my picture)!
Thanks for posting so many pics. I just ordered one of the white ones today and feel more secure in my decision after seeing your post. I'm currently using one of the generic "folio" type cases off of Amazon and was looking for something that was less awkward to use while I wait for Otterbox to release the Commuter/Defender cases.
It's disappointing to hear the cases are a little slippery. I was hoping for quite a bit of grip improvement.
DeoreDX said:
It's disappointing to hear the cases are a little slippery. I was hoping for quite a bit of grip improvement.
Click to expand...
Click to collapse
The back plate is a slippery (and on the black, it's a fingerprint magnet, as you can see!) but the sides are rubber, and it won't slide out of your hand if you're holding the sides. But the back itself is slippery. It's plastic... Of course it is! It's SAMSUNG!
Dual Boot said:
Thanks for posting so many pics. I just ordered one of the white ones today and feel more secure in my decision after seeing your post. I'm currently using one of the generic "folio" type cases off of Amazon and was looking for something that was less awkward to use while I wait for Otterbox to release the Commuter/Defender cases.
Click to expand...
Click to collapse
I'm glad to have helped! I'm really content with the cases. You can tell that they've been made specifically for this phone. All the details are there for the ports and buttons. It is actually slimmer than my other TPU cases.
I'm not a fan of folio cases because I don't want to cover the LED Notification light, or when it's open cover the camera! They're probably two of the most important features about this phone for me.
get the bodyglove :good:
Looks like a winner so far.. still waiting for one to arrive. For now using the body glove case
Sent from my SGH-T889 using xda app-developers app
+1 for this case, got mine in the mail today..
thanks! just ordered the white one based on the pictures (especially since my white tpu case from asia is taking forever to get here).
hope this case isn't too thick. i need a tpu case for accidental drops, but with minimal added thickness.
chuhsi said:
thanks! just ordered the white one based on the pictures (especially since my white tpu case from asia is taking forever to get here).
hope this case isn't too thick. i need a tpu case for accidental drops, but with minimal added thickness.
Click to expand...
Click to collapse
It's not too thick. Hehe. Its on par with other tpu cases if not thinner. It's very well planned.
Sent from my GT-N7100 using Tapatalk 2
zkyevolved said:
It's not too thick. Hehe. Its on par with other tpu cases if not thinner. It's very well planned.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Looks good in them pics! I checked my tracking number and looks like my black case is waiting for me at home :good:
I might just wait for the T-Mo D3O cases before deciding but these cases look good. I was hoping the interior would be silicone or something like those Speck cases.
Thank You for the review!
uchosen said:
Looks good in them pics! I checked my tracking number and looks like my black case is waiting for me at home :good:
Click to expand...
Click to collapse
What day did you order yours?
Sent from my SPH-L900 using Tapatalk 2
Jocelyn said:
Thank You for the review!
What day did you order yours?
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I ordered mine on the 25th and shipped out on the 27th. I'm in SoCal USA and it shipped from Dallas, TX.
Received and agree on all points. Fit is superb. Yeah, it's a little slippery on that glossy back piece but you're going to be gripping the rubbery sides so I wouldn't worry too much about it. Those raised plastic button covers on the sides for the volume and power are indeed nice and very assuring to the touch. It's not as thick as I thought it would be from seeing the pics.
Only con is it does add more weight than I would prefer but I feel more secure with the phone inside so I can deal with it.
My new favorite case over the Nilkin that exposed the top and bottom of the phone. :victory:
mine shipped today. I usually dont use cases, but i gotta say i loved the way the samsung cases looked on the GS3, looking so thin, i barely even noticed people had cases on them when i saw people pull them out. gotta love the samsung 50% off coupon too, ordered the tectiles and charging dock and battery. ( rE155266e coupon code)
I've received some PMs about where I got my cases from. It's a company here in Madrid. Their website is www.Octilus.com, they had the cheapest price I could find and their shipping was only 1€. I'm enjoying the cases highly recommended.
Sent from my GT-N7100 using Tapatalk 2
I was concerned about adding bulk to this sexy device, but I can safely say its a non-issue with this..
I got my black case yesterday and I'm very pleased with fit and finish. I don't think it's possible for a case to add less bulk and provide similar protection. The hard back does show finger prints and finger oil smears very clearly but no big deal and overall looks better than the T-mobile logo IMHO. Soft sides provide good grip and the charcoal gray color looks very good with the front bezels of titanium model. It didn't seem like a tight fit going on but doesn't seem loose in use. I imagine a little looseness is a good thing when it comes to shock adsorption and I believe the rubber sides will grip well enough to prevent the phone from separating during most falls. The edge surrounding the screen is raised enough to keep it from touching a flat surface when face down but just barely. I expect the screen could make contact if the phone is dropped on an irregular surface. I have a Spigen SGP Ultra Clear screen protector for that situation and highly recommend it as well. I can't even tell it's there from looks or function. Invisible to the eye and S-pen with cut outs for camera, proximity and light sensors as well as the speaker and home button. Feels like the native glass to finger and pen might actually feel better with a very very slight and benefitial increase in drag. So slight it may be imaginary.
,
Sent from my SGH-T889 using xda app-developers app
Got my white one today. Looks amazing. Now come on Verizon, send me my GN2!!! Getting the case is just a teaser!
Ordered the black for myself and white for the wife. Still waiting on them to get here, we usually only use Speck cases but since Speck has not came out with one yet These will have to do. Plus we got each of them for 50% off for registering our phones on the Samsung site.
Sent from my SGH-T889 using xda premium
Hi
Ordered my black case yesterday as it seems the only nice and simple case at this moment. Probably will get it middle of next week.
Thanks for all the pictures and comments, they confirm my choice
Sent from my GT-N7100 using xda app-developers app

Samsung Galaxy Note II DualPro SHINE Case

Hi All,
I just got this case in the interim until I get the otterbox defender. I had it fedex overnight because I usually put my phone in my pocket. It reminds me of the otterbox commuter but not bulky and its in a silver Aluminum finish with a good feel and not a fingerprint magnet. Not slippery. Tactile buttons are responsive without any problems. Very well built dual protection case. Access ports are not covered.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not to be nosy but by the time you're done buying cases, I think you would have spent enough to buy squaretrade insurance.
swyped all these spelling errors from my galaxy note 2
finalhit said:
Not to be nosy but by the time you're done buying cases, I think you would have spent enough to buy squaretrade insurance.
swyped all these spelling errors from my galaxy note 2
Click to expand...
Click to collapse
Yeah the problem was that the Otterbox Defender wasn't available but all these other cases were so I had to go thru looking for a case that would fit in my pocket. The cheap tpu cases didn't instill confidence when I put it in my pocket and the Speck Candy shell case was a little better but it's rubber gray material frays when you put it in your pants. It also was more rigid than the tpu cases but I still was worried about it not being rigid enough. This case however is different and the hard shell is really rigid. No worries about putting this in my pants. The hard material is very solid and a very nice feel. Oh well still waiting for the otterbox but this will do until it gets here. Otterbox using Fedex smartpost sucks! I'm praying it gets here and not lost in the usps christmas frazzle. lol.
This one actually looks very nice. Interesting..
Wow, looks nice and sleek.
I see a seller in ebay has it for about $24.95.
Let me know how you like it when the Otterbox comes since this looks much thinner and easier to pocket.
Nice!..the color blends well with the white note 2..any other colors?..found some pink/white on ebay..
Psy, could you snap some pics of this case on your phone? Its hard for me to see how it looks with the stock images on their site. Thanks.
Sent from my SPH-L900
Been planning on buying this case. Kinda pissed their "sale" they advertise on Fb is nowhere to be seen on the actual site
Sent from my SPH-L900 using xda premium
sleshepic said:
Been planning on buying this case. Kinda pissed their "sale" they advertise on Fb is nowhere to be seen on the actual site
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Finally stumbled across this case after searching for three days or so for a case for my incoming Note 2.
I just ordered it off ebay and had to cancel my other case I had ordered from Amazon. I figure the extra $8 will be well spent, and I really like the aesthetics of it. No kickstand is a positive for me.
Do you have a link for me, [email protected]
Windkracht13 said:
Do you have a link for me, [email protected]
Click to expand...
Click to collapse
Here is the link for this case on ebay.
http://www.ebay.com/itm/Incipio-Dua...448787?pt=PDA_Accessories&hash=item5aec6a5753
Sent from my SGH-T889 using Tapatalk 2
coiledwire said:
Psy, could you snap some pics of this case on your phone? Its hard for me to see how it looks with the stock images on their site. Thanks.
Sent from my SPH-L900
Click to expand...
Click to collapse
Here ya go. Excuse the quality, I was using my wife's SGSII to take the pictures.
Please delete this blank post
psygnosi said:
Here ya go. Excuse the quality, I was using my wife's SGSII to take the pictures.
View attachment 1570364
View attachment 1570365
View attachment 1570366
View attachment 1570367
View attachment 1570369
View attachment 1570370
One more.
These pictures don't do this case justice. Its a very beautiful, well-built, classy, slim and durable case. Friends and fellow employees are telling me what a beautiful case it is....Its really shiny.
Click to expand...
Click to collapse
How the sides hold up to pressure, around the outside of the screen? I noticed theres no support from the hard shell to stop the silicone lip from being pushed back from the screen. Ordered one, will just have to see I guess
Sent from my SPH-L900 using xda premium
sleshepic said:
How the sides hold up to pressure, around the outside of the screen? I noticed theres no support from the hard shell to stop the silicone lip from being pushed back from the screen. Ordered one, will just have to see I guess
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Because the outer shell is very rigid there is very little play to move the silicone lip. You have to force it hard to move. This is not a case for changing batteries. I'm actually scared to pull the phone out of the case. I had the otterbox commuter for my old Galaxy Note i717 and the material for the outer shell of that case is less rigid than this case. my 2 cents.
psygnosi said:
Because the outer shell is very rigid there is very little play to move the silicone lip. You have to force it hard to move. This is not a case for changing batteries. I'm actually scared to pull the phone out of the case. I had the otterbox commuter for my old Galaxy Note i717 and the material for the outer shell of that case is less rigid than this case. my 2 cents.
Click to expand...
Click to collapse
Thats too bad, I have to do battery pulls occasionally (especially now that the power button long press doesnt reboot) and I usually depend on dual layer being fairly easy to remove. Right now the Aegis case I have feels like its bad to remove and replace frequently - which is good I guess in general just cus its snug, but bad of you need to remove the battery once or twice a day
Sent from my SPH-L900 using xda premium
Thanks for posting pictures. Mine should be coming in soon. I gather from your asher past that you're suggesting that removing the phone from the case seems pretty difficult?
Sent from my SGH-T889 using Tapatalk 2
sleshepic said:
Thats too bad, I have to do battery pulls occasionally (especially now that the power button long press doesnt reboot) and I usually depend on dual layer being fairly easy to remove. Right now the Aegis case I have feels like its bad to remove and replace frequently - which is good I guess in general just cus its snug, but bad of you need to remove the battery once or twice a day
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I'm taking my phone (Galaxy S III albeit) out of the same case on a daily basis (to put into an arm sleeve for a run) and it holds up just fine - pry off one top corner, then another and you have your phone out of it.
samklee said:
Thanks for posting pictures. Mine should be coming in soon. I gather from your asher past that you're suggesting that removing the phone from the case seems pretty difficult?
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Just got this case in last night and it is a great case no doubt, beautiful, not bulky, and offering decent protection, but holy cow is it tight and both hard to put on and remove. It's a concern for me, as I need to change the SIM when traveling.
I'm really afraid to damage the case, it is the tightest fit of any case for any device I have ever owned.
Sent from my SGH-T889 using Tapatalk 2

Tech 21 D3O Impact Shell Review

Hey Guys,
I have decided to just jump the gun and buy the Tech 21 D3O impact shell from the T-Mobile store. The case ended up be $10 and something cents. I bought it at the store and they gave me a 30% discount for checking into Foursquare otherwise the price of the case is $16.99 not including tax. The case can be purchased online at: http://www.t-mobile.com/accessories/lg-g2-d3o-impact-shell-smoke.html.
I currently own 2 cases including the case I have. I have this case and the Spigen Slim Armour. I love both of the cases but I do prefer this Tech 21 case. Both cases are well built and will definitely survive a fall. I have not dropped the case, but I feel like the technology behind the case will definitely protect it from a fall. I currently have the xtremeguard screen protector on the phone and the case does push the screen protector up, but the lip of the case covers more of the screen than the Spigen case so it doesn't have the problem as often. The case has an awesome feel to it. It has a matte feel and offers more grip that the Spigen. The case is also rounded so it doesn't feel like it is cutting into your hand. I personally bought the smoke version, but there is a purple version available. The case looks awesome with the orange bands going around the circumferance of the phone while the rest of the smoke color of the case allows you to see through the back to see the G2 symbol. I do own the AT&T D800 version and it has the cut out for the 2nd microphone on the back. The case feels like TPU with D3O that surround the phone.
Hopefully this everyone. If you are looking for a new case, IMHO this is a case to consider.
Here are the pictures that I was going to post.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D800 using Tapatalk
Thanks for the review. I have thought about this case. How would you compare it to a tpu case. Looks like one except for the orange band which seems to be the D30 technology.
Also how thick and bulky is it in comparison to a tpu case.
Sent from my LG-D800 using XDA Premium 4 mobile app
mozman said:
Thanks for the review. I have thought about this case. How would you compare it to a tpu case. Looks like one except for the orange band which seems to be the D30 technology.
Also how thick and bulky is it in comparison to a tpu case.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It honestly feels like a TPU case with the D3O tech like you were saying. I don't own a TPU case for the G2 but I have had TPU cases in the past and this stuff feels a little more flexible but it still maintains its shape when it is on the phone. The case fits nicely and it looks good as well. The case actually doesn't add too much bulk. It keeps the shape of the phone and is slightly thicker than without a case. I feel like it is definitely not as "bulky" as the Spigen case as well. :good:
kindacrazyazn said:
It honestly feels like a TPU case with the D3O tech like you were saying. I don't own a TPU case for the G2 but I have had TPU cases in the past and this stuff feels a little more flexible but it still maintains its shape when it is on the phone. The case fits nicely and it looks good as well. The case actually doesn't add too much bulk. It keeps the shape of the phone and is slightly thicker than without a case. I feel like it is definitely not as "bulky" as the Spigen case as well. :good:
Click to expand...
Click to collapse
Awesome! This was the info I was looking for lol. Im currently using the Spigen Slim Armor and found it a bit too bulky, so i jumped the on the tech21 case from the T-mobile site. Thanks for the review! Cant wait to get mine
sekretaznman said:
Awesome! This was the info I was looking for lol. Im currently using the Spigen Slim Armor and found it a bit too bulky, so i jumped the on the tech21 case from the T-mobile site. Thanks for the review! Cant wait to get mine
Click to expand...
Click to collapse
No problem! I wish I had the info before I bought it but I ended up trying it at the store and liked it. Hope you enjoy it as much as I do. And I definitely use this case more than the Spigen
Sent from my LG-D800 using Tapatalk
kindacrazyazn said:
No problem! I wish I had the info before I bought it but I ended up trying it at the store and liked it. Hope you enjoy it as much as I do. And I definitely use this case more than the Spigen
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I also had the Spigen Slim Armour as my first case for the G2. But I also got the Tech 21 case, and although I still like the Slim Armour case, the Tech 21 is better for me as the edges are more rounded and it's a little less bulky than the Slim Armour.
I keep my college ID card in the back of my current phone case, so I like cases that are easy to take on and off. Is this one easy to take on and off?
darnocs1 said:
I keep my college ID card in the back of my current phone case, so I like cases that are easy to take on and off. Is this one easy to take on and off?
Click to expand...
Click to collapse
The case is easy to take off. But you might run into the problem of the case not fitting properly. The case is pretty tight on the phone, so the case might not be happy with you. I can try it out and see if I can get a picture for you.
kindacrazyazn said:
The case is easy to take off. But you might run into the problem of the case not fitting properly. The case is pretty tight on the phone, so the case might not be happy with you. I can try it out and see if I can get a picture for you.
Click to expand...
Click to collapse
Thatd be great, if you don't mind!
darnocs1 said:
Thatd be great, if you don't mind!
Click to expand...
Click to collapse
Here are the pictures. The case is a little funky after the id is put in. It is definitely not meant to be there but it could potentially work. I put my school id and it is the side and thickness of a credit card. Hopefully this and the pictures help.
Sent from my LG-D800 using Tapatalk
Thanks, I really appreciate it. Could you tell me how easy it is to take the card in and out of the case? Does the case come off easily without being dangerously loose?
darnocs1 said:
Thanks, I really appreciate it. Could you tell me how easy it is to take the card in and out of the case? Does the case come off easily without being dangerously loose?
Click to expand...
Click to collapse
I would say that the case is a little harder to take off. The card is also pretty snug in there. The case also barely hangs on too. The case definitely adds space between the case and phone.
Sent from my LG-D800 using Tapatalk
I wish that they sold these somewhere other than T-Mobile.
Haesslich said:
I wish that they sold these somewhere other than T-Mobile.
Click to expand...
Click to collapse
Ya. I know what you mean. I drove 30 mins to get mine. But I don't use it too often because it pushes my screen protector up. But I still use it every once in a while.
Sent from my LG-D800 using Tapatalk
At least you had the option. If you're not in the States or close to the border, good luck. I wish there was a way to get one.

Anyone w/ an LG G4 want to start a dang Bumper Case company with me!!???

Sheeesh this is getting ridiculous that there's maybe 2 out there and both companies look sketchy and they're in china and take weeks, maybe a month, to get (if they even will fit).
Whoever actually does finally mass produce one will make a killing on the leather backed G4 market. Maybe someone at one of the big guys like Spigen, UAG, Incipio, etc. will read this post and get off their butts and get some out there. I think I'm speaking for most of us when I say we don't want a bumper with a clear back so the leather is mushed inside and we can't feel it.
Just saw this one for the iphone. I'd love to see something like this instead of that silly frame thing from zdelco.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm with you. I don't want to hide the leather back either but would like some sort of protection on the corners. The profit margin has to be huge. I can't believe nobody has imported a couple thousand or so units, marked them up a couple bucks and made them available on Amazon with reasonable shipping times.
psechler said:
Sheeesh this is getting ridiculous that there's maybe 2 out there and both companies look sketchy and they're in china and take weeks, maybe a month, to get (if they even will fit).
Whoever actually does finally mass produce one will make a killing on the leather backed G4 market. Maybe someone at one of the big guys like Spigen, UAG, Incipio, etc. will read this post and get off their butts and get some out there. I think I'm speaking for most of us when I say we don't want a bumper with a clear back so the leather is mushed inside and we can't feel it.
Click to expand...
Click to collapse
Just got done searching for one myself before heading over here to this forum for any help...you took the words right out of my mouth (or keyboard I guess). I'm sure eventually there's going to be more options, but unbelievable just how few there are at the moment, considering the leather back is one of the biggest selling features of the phone.
I guess I'll have to switch to a plastic back of I want to use a bumper
I dunno never seen a bumper provide any kinda protection so might as well go are
Sent from my LG-H811 using Tapatalk
I had a metal bumper on my GSIII that took all sorts of abuse and kept the phone pristine. Why would you think it wouldn't provide protection?
kidcope06 said:
I had a metal bumper on my GSIII that took all sorts of abuse and kept the phone pristine. Why would you think it wouldn't provide protection?
Click to expand...
Click to collapse
Exactly.... as long as the bumper has nice corners and general layering and around the edge is fatter than the face and back by a few millimeters then your protected from drops. Unless of course you drop it on something sharp not flat which would be rare.
Ballistic made some cool cases imo that would be a nice bumper. The corners were thicker and overly fat, but the rest of the edges fit close to the phone so kept a slimmer feel.
Got my bumper, skinomi tech glass, and my black leather G4 yesterday and I'm happy to report they work together great. Bumper is a little snug but it certainly fits.
Here's the one i got.
http://m.ebay.com/itm/131517775534?_mwBanner=1
kidcope06 said:
Got my bumper, skinomi tech glass, and my black leather G4 yesterday and I'm happy to report they work together great. Bumper is a little snug but it certainly fits.
Here's the one i got.
http://m.ebay.com/itm/131517775534?_mwBanner=1
Click to expand...
Click to collapse
Was it tough to get it on? Is it so snug that you think it might damage or leave a mark in the leather? Convenient to take it on and off to swap batteries?
tourbound129 said:
Was it tough to get it on? Is it so snug that you think it might damage or leave a mark in the leather? Convenient to take it on and off to swap batteries?
Click to expand...
Click to collapse
I wouldn't say it was very tough at all to put on but I would guess it's probably easier on a plastic back.
It may leave a depression in the leather after a year or so but I wouldn't guess that's likely.
I'm not sure what your threshold for convenience is so i can't guess. It won't bother me to take it off a couple times a week.
kidcope06 said:
I wouldn't say it was very tough at all to put on but I would guess it's probably easier on a plastic back.
It may leave a depression in the leather after a year or so but I wouldn't guess that's likely.
I'm not sure what your threshold for convenience is so i can't guess. It won't bother me to take it off a couple times a week.
Click to expand...
Click to collapse
Sounds good. Thanks for the feedback. I'll probably order one to try it out.
kidcope06 said:
I had a metal bumper on my GSIII that took all sorts of abuse and kept the phone pristine. Why would you think it wouldn't provide protection?
Click to expand...
Click to collapse
kidcope06 said:
I wouldn't say it was very tough at all to put on but I would guess it's probably easier on a plastic back.
It may leave a depression in the leather after a year or so but I wouldn't guess that's likely.
I'm not sure what your threshold for convenience is so i can't guess. It won't bother me to take it off a couple times a week.
Click to expand...
Click to collapse
How's the lip on it; does it look like it'll keep the glass from making contact? And also that weird looking white liner inside the bumper looked cheap. Is it fairly solid and even tho it's minimal will it provide some shock absorption ?
kidcope06 said:
Got my bumper, skinomi tech glass, and my black leather G4 yesterday and I'm happy to report they work together great. Bumper is a little snug but it certainly fits.
Here's the one i got.
http://m.ebay.com/itm/131517775534?_mwBanner=1
Click to expand...
Click to collapse
Does the bumper affect WiFi or cell signal at all? Tia
Sent from my LGLS991 using Tapatalk
psechler said:
How's the lip on it; does it look like it'll keep the glass from making contact? And also that weird looking white liner inside the bumper looked cheap. Is it fairly solid and even tho it's minimal will it provide some shock absorption ?
Click to expand...
Click to collapse
Lip is good. It will keep the screen from touching when face down. The liner is certainly minimal. It's like a foam rubber band. It's probably not going to do any shock absorbing but it will keep the metal from rubbing on the plastic. Keep in mind this was only like $7.
Sent from my LGLS991 using Tapatalk
---------- Post added at 07:22 PM ---------- Previous post was at 07:17 PM ----------
fgcchevy said:
Does the bumper affect WiFi or cell signal at all? Tia
Sent from my LGLS991 using Tapatalk
Click to expand...
Click to collapse
None that I can tell.
Sent from my LGLS991 using Tapatalk
sad panda everyone email them!
I sent them a good email, basically saying there missing out on a gold mine. Every leather G4 owner would prefer a high quality backless case.
Sent from my VS986 using XDA Free mobile app
psechler said:
I sent them a good email, basically saying there missing out on a gold mine. Every leather G4 owner would prefer a high quality backless case.
Sent from my VS986 using XDA Free mobile app
Click to expand...
Click to collapse
I know right?!
A wood bumper would be awesome, but even a simple TPU bumper would do
I think I finally found the bumper I'm looking for. It's rubber and flexible and only 4.99. I guess I'll find out in 2 to 4 weeks. Here's the link for others that were interested.
http://pages.ebay.com/link/?nav=item.view&id=381298599870&alt=web

Categories

Resources