Database Develop

[Q] Need help with restoring backup from ROM Manager

I've been searching, and reading, and my eyes hurt. I normally don't like to post threads, but I'm left with no choice. If this topic has been covered, then I guess my searchin' skillz are stating to lack. Here is my delimna:
Rooted, Lagfix, enabled Side-loading, recently installed ClockworkMod, stock firmware. I ran a backup using ROM Manager/ClockworkMod. I was attempting to install the Mobile AP fix for WiFi Hotspotting from designgears. I downloaded the new kernel per instructions (Mobile AP ony). I first tried installing it using ROM Manager's boot option into Clockwork without renaming MobileAP.zip. Still received black screen when I open the Mobile AP settings that the new kernel was trying to fix. So I thought that the flash didn't work, so this time I renamed the kernel file to update.zip and did the standard method of flash using stock recovery mode.
Now the phone boots to the Galaxy S screen, then just a black screen. The bottom row buttons seem to be active, but nothing happens. Holding power....nothing. I have to pull the battery; however, I can boot into stock recovery.
Now here's the delimna. I can boot into recovery, but the update.zip file is NOT the one for ClockworkMod, its the modified kernel. Is there a way that I can browse the files on the phone so I can change the update.zip file? I want to put Clockwork's in place so I can restore using my backup made yesterday....It's not a huge order if I have to flashback to stock and lose everything as I usually do that everynow and again anyways (usually I'm prepared). I won't lose anything important that isn't already backed up except maybe some pictures....
BUT, I can't help but try. It's just me I like to break stuff and fix 'em. I want to try to run that backup I made. I have Odin, and I tried flashing the kernel back to stock (i had one hell of a time finding information on how to use it). As a matter of fact, I found instructions on HOW to use it, but I gave up trying to find useful information on how the program runs (like a user guide, what else can it do, that sort of thing....). I spent hours reading thread after thread........information overload I guess.
I figured someone might point me in the right direction. How can I browse/edit the contents of the phone while in Recovery or Download mode?

You could try letting the phone boot up, yes I know it's only a black screen, then plug in the usb to your PC and see if ADB works.
If so then just adb shell into it and work with command line.
I'm not sure if ADB would work in stock recovery mode but that's worth a shot too.

Excellent idea, but no luck. I can get the computer to recognize the phone in recovery mode, but ADB shows the device offline, and Windows Explorer shows 2 drives with the whole "insert disk into drive ..." message. Can't boot phone to enable "development mode", that might have something to do with it......unless I'm missing something?

swedishcancerboi said:
Excellent idea, but no luck. I can get the computer to recognize the phone in recovery mode, but ADB shows the device offline, and Windows Explorer shows 2 drives with the whole "insert disk into drive ..." message. Can't boot phone to enable "development mode", that might have something to do with it......unless I'm missing something?
Click to expand...
Click to collapse
Wasn't sure if that would work or not.
So, if you turn it on and just let it sit as long as a normal boot, then try adb does anything work?

I actually let it sit for ~15 minutes. computer doesn't even register the usb being plugged in. I'm going to give it another go or two, but in about an hour I'm going to have to call it quits and just flash it with Odin. Don't want to give up yet, but I am driving out of town later this afternoon and must have my phone for the trip. Maybe I'll break it again tomorrow and play with it over the weekend!
Let me know if you have any other ideas. I'll let you know when I give up.

While on that subject (watch someone tell me to move my post after this.....), maybe I'll experiment with a new ROM. Any recommendations? (without OC, device is fast enough). I haven't read much on the different flavors available at the moment (I think I read something about a 2.2 from I9000 or something?).

swedishcancerboi said:
While on that subject (watch someone tell me to move my post after this.....), maybe I'll experiment with a new ROM. Any recommendations? (without OC, device is fast enough). I haven't read much on the different flavors available at the moment (I think I read something about a 2.2 from I9000 or something?).
Click to expand...
Click to collapse
Hybrid from eugene is pretty fast especially if you add the voodoo kernel to it. Thats what I heard tho. Because when i tried it out it was pretty quick with out a lagfix and without autokiller. Only used it for 20 min tho as i couldn't get Titanium backup to work. I think the titanium problem is a hit or a miss.

well, I guess I'm going to have to load stock and wipe everything...oh well. Let's see how this goes. Then I'll start playing with ROMs this weekend. Thanks anyway!

swedishcancerboi said:
well, I guess I'm going to have to load stock and wipe everything...oh well. Let's see how this goes. Then I'll start playing with ROMs this weekend. Thanks anyway!
Click to expand...
Click to collapse
Well, if your going to do that take an extra 2 minutes and load Eugenes Hybrid R3 while your at it. It's extremely easy to do and in my opinion the fastest thing we can put on these phones right now.

Vibrant ROM? is that safe? I mean, I know they are all Galaxy S, but is the hardware really that identical?

I don't think eugenes captivate hybrid is actually a vibrant rom. I think he just borrowed some of the better parts.
Sent from my SAMSUNG-SGH-I897 using XDA App

Got it! I used the one click stock down loader to get the phone to boot. I then noticed that many of my files were still there, music, zips.....so I thought....maybe my backup is still there.
Instead of using my original root, I decided to try Unleash the Beast.applied it so I could load Rom Manager.i opened Rom manager and it showed my backup!
I tried restoring then without success (no update.zip) and had to flash clockwork (even though it showed it already loaded, guess it needed to be refreshed, makes sense since it is a fresh firmware), selected my restore and it ran like a charm.
I am just surprised. I thought the act of flashing the Rom would wipe everything. Apparently not if you never do the "master clear."
Thankfully I had just installed Rom Manager the day before and had a fresh backup. Looks liked I'm gonna have to start shelling out more beer money to the devs!
Now I can prepare to break it again and again. Let the fun begin!
Sent from my SAMSUNG-SGH-I897 using XDA App

Nice. Yeah, stuff you have stored on your "internal SD" is safe between flashes. Of course apps, contacts, etc get wiped, but that's an easy fix.

"the more you know," eh? Ha!
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Help with rebooting hero. $$$ for fix...

Before you tell me to 'Google it' (which I have, and leads me to 1000 posts of people telling other people with the same problem to 'Google it'), please read.
I will PayPal anyone $20 with working instructions of how to resolve this
Phone: HTC Hero w/ chin
Carrier: Alltel
Story:
Switched from WM6 Palm Treo Pro to HTC Hero. Came with 2.1 and needed apps2sd. Want CM7 stable.
-Rooted using AndRoot.
-Installed SuperUser and Root Checker. Root Checker said I was good to go. SuperUser would not show any apps in the list this whole time.
-Installed Titanium Backup which said I needed BusyBox, but it would fail to install. Tried to install busybox and it said I was not rooted. Alright...
-Installed ClockworkMod and flashed recovery. Tried to reboot into clockwork recovery, but when I clicked it, it did nothing. When I clicked rom from sd card, and clicked the CM7, it said 'going to reboot now' but again, nothing happened.
I booted into recovery manually, but it was still in Android system recovery. Apparently there was some sort of rooting problem, so I tried z4root. Permanent root was stuck on 'rebooting', and temporary root said successful, but something was still wrong as BusyBox installer would say I was not rooted, and SuperUser app didn't show any programs to allow permissions.
I turned the phone off, and back on. It goes to the white 'HTC' screen, reboots, and then comes to a black page with a picture of a Hero and a red triangle and exclamation mark. I hold home and hit power, and it takes me into the Android system recovery. I wiped data and cleared cache, rebooted, and it does the same thing.
- - -
Now i've done many hours of research, and found nothing to help me. I guess i'm a bit confused on what the SDK does and how to use it, because it won't connect to my phone since I can't even boot my phone into the OS. I tried to download the RUU and rename it update.zip, but it says signature verification failed or not found in android recovery. I've done the clear data method by holding home, back, and power, but still nothing.
I need a clearcut answer for getting back to a stock Alltel 2.1 OS on my phone. I am more advanced than a basic user, and have flashed many roms on Windows Mobile, but remember I might not exactly understand everything.
I'm a silent browser on these forums but now I come to you guys for help. I hope to grow into a dev and hopefully help someone in the future in my position.
I read somewhere to wipe EXT2, but still confused on that process as it seems I don't know how to get into adb command line on my computer.

Try reflashing the cwm recovery. Sounds like you have no recovery image.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!

Dumb question...did you flash a ROM? Maybe I missed it in your post, but I see you installed Clockwork, SuperUser and all that, but don't see that you flashed a ROM. *EDIT* I see you did...
So...worst case scenario, if you can't even boot your phone, just start over from scratch...
Download the original AllTel ROM from here.
If you don't have HTC Sync set up and can't restore from your computer, use this method to flash it...your phone should now boot...
Then try to reroot, using this (preferred) or this.
Download ROM Manager from the Market and install ClockworkMod Recovery
Boot to recovery (hold home and power at the same time).
Once in recovery, wipe cache, system, data and boot (make sure you don't wipe your sd card! Do it twice for good measure)
Select install .zip from SD card, select zip and you should be good to go with a rooted phone and a new ROM.
I think that should cover it...

Ok, on your first link to flash my phone, the step says:
"With phone powered on, do "adb reboot bootloader" to enter fastboot."
How do I get the command prompt on my computer to communicate with the phone? That was my biggest problem when reading other people's posts. I guess i'm a bit lost. I installed the r10 android sdk which I believe is the first step? And when my phone is connected to the computer to enter these commands, is it okay if it is sitting at that screen with the red triangle?
Thanks for your help btw your steps sound simple, and simple is nice. One step closer!

Do you have HTC Sync set up? If you do, you should be able to restore from that to get you back to official AllTel...That's going to be the easiest way to get you back to stock I think.
And...I am on a Mac So, helping someone on a PC is not my forte with ADB
I'd try setting up HTC Sync and get yourself back to stock that way.
EDIT - To get it to communicate, you need to set up ADB and all that. Then just use command prompts...Try this thread for help/instructions.

I actually got it to load that rom with vol down + power but eventually got to 'CID incorrect! Update fail!', so i'll try connecting to sync.

damienisxcore said:
I actually got it to load that rom with vol down + power but eventually got to 'CID incorrect! Update fail!', so i'll try connecting to sync.
Click to expand...
Click to collapse
What ROM? The AllTel one?
I have to take off until about 8:30 or so...get yourself set up with HTC Sync and get the USB drivers and all that set up, first thing you need to do is get your computer to talk to your phone...download the official AllTel RUU and restore to stock. That's task 1
Then we'll get ya rooted

I think I found a rom that worked. Currently rebooting. I can follow the rest and if I need anymore help, I'll give you a hollar. I should have had it right the first time, but I was following about 5 sets of different directions and mixing them around to avoid certain programs. I like yours though.
Send me a PM with your paypal e-mail and I can send it over. Least I could do.

OP, glad you got it. What rom?
Ranger, nice!
sent from a series of tubes.

il Duce said:
OP, glad you got it. What rom?
Ranger, nice!
sent from a series of tubes.
Click to expand...
Click to collapse
He flashed CM7. Gotta get him on aospCMod

damienisxcore said:
I think I found a rom that worked. Currently rebooting. I can follow the rest and if I need anymore help, I'll give you a hollar. I should have had it right the first time, but I was following about 5 sets of different directions and mixing them around to avoid certain programs. I like yours though.
Send me a PM with your paypal e-mail and I can send it over. Least I could do.
Click to expand...
Click to collapse
It's tough sometimes to follow things...and as much as we always tell people to search, ya know, the search kinda sucks I searched for all the threads I linked for you, but I knew what I was looking for. If you don't know what to look for, searching is kinda tough. Glad you got it!
Now...if you want a real ROM, I'll just toss this one out there In all actuality, CM7 and aospCMod are quite similar, I am just partial to aosp's builds.
Let me know if you need any more help.

[Q] wrong sbf? need proper one for (RTGB)

first post, yes, i'm new to this... (forum, not flashing, not entirely anyway, i did fiddle with Sony Ericssons and stuff, kindergarden compared to androids)... but not an idiot, to the point:
firmware config. version seems to be RTGB, great britain, right? wrong, a RTUK is not it. I am sort of lost, i bought the phone with 2.1-update1, the 2.2.1 update has not yet been rolled out in my backwards country, so i did an official update over the internet with motorola app etc etc. I have no idea what was the 2.1 fw config. ver., but it strikes me as weird that i have a RTGB one now, the packaging/box/manuals all were German or something that looks like German. And now, i got myself RTUK sbf file, and RDS lite fails to do anything. I require assistance, and an explanation if possible as to why this didnt work? if i chose the wrong sbf, why does it show me having RTGB? and finally which sbf to take and from where (two german one's are available on this forum), but i've seen only one RTGB and it was only 2.1. For comparison, the friend bought the same phone on the same day, but she got one with a qwertz keyboard, mine is normal qwerty, fw config. ver. shows VFDE, did not update hers, it's still 2.1-update1. I can only assume that VF is german for RT and that her phone did not come from an unknows source. The phone company selling these obviously imports them, possibly even from random countries or EU countries at least...
however something did happen, my battery in the notification seems to be not present, there's just a question mark inside what appears to be an empty battery... apps that show battery levels work fine... although, scratch this last one, a reboot fixed it, even though i have not seen it before.
also, help me rack up some posts ^^ ask for info or whatever, i'd like to give a shot at improving my android...

Check the link below. You will get both service and non-service versions of 2.2.1 sbf's.
http://and-developers.com/sbf:milestone221
VF would be vodafone ( service version) while RT would be retail version.
Sent from my Milestone using Tapatalk

Thanks, gonna try asap, will come crying if it explodes in my face...

SuicideTree said:
Thanks, gonna try asap, will come crying if it explodes in my face...
Click to expand...
Click to collapse
It wont. I have done it many times and my face is still intact, as you can see from my avatar.
Sent from my Milestone using Tapatalk

now add a laptop that sometimes, actually recently starts bsoding not when you're gaming but when you're picking your nose... and now a serious question, how screwed am i if the laptop crashes WHILE doing something with RDS Lite or something similar ;]]

SuicideTree said:
now add a laptop that sometimes, actually recently starts bsoding not when you're gaming but when you're picking your nose... and now a serious question, how screwed am i if the laptop crashes WHILE doing something with RDS Lite or something similar ;]]
Click to expand...
Click to collapse
which version of rsdlite and what OS? rsdlite should not cause your OS to crash.

oh no, it's not rsd lite related, it's just laptop hardware being faulty, that's my assumption anyway, this laptop is going to the warranty next monday, it bsods randomly and i mean really randomly... atm i have win7ult x64 and rsd is 4.9... however this is unrelated, i had a linux here and on it was screwing me over from day one.

SuicideTree said:
oh no, it's not rsd lite related, it's just laptop hardware being faulty, that's my assumption anyway, this laptop is going to the warranty next monday, it bsods randomly and i mean really randomly... atm i have win7ult x64 and rsd is 4.9... however this is unrelated, i had a linux here and on it was screwing me over from day one.
Click to expand...
Click to collapse
Try it and see if it works.

Just finished. Seems to be good. Gonna Continue with the guide then ^^ Many thanks.

instead starting a new topic IDIOT QUESTION but... can someone give me a detailed dumbed down version of this instruction bellow:
If you applied an OTA update before, there is a script run at every system boot that checks and re-flashes the recovery when its checksum doesn't match. In such case, you have to avoid booting to android after the vulnerable recovery flash. Boot directly to recovery when RSD Lite restarts the phone (hold camera button) and from there remove the /system/etc/install-recovery.sh file.
rm -f /system/etc/install-recovery.sh
i am getting this
E:Cant open /cache/recovery/command
just upon entering AOR (power+x)
trying to apply the update regardless i get this
- install from sdcard
finding update package
opening update package
verifying update package
E:EOCD marker occurs after start of EOCD
E:signature verification failed
Instalation aborted
what is the meaning of this?
possible solutions:
"It seems that the key to successful recovery flash in some cases is to not let the phone to boot to android or recovery until the RSD Lite will signal PASS. When the RSD Lite is restarting the phone during flash, hold the D-Pad Up, so the phone enters the bootloader again immediately."
does this work? DIDNT WORK, so i still need help
i'm still combing through many threads mentioning this... either please tell me this works or point me in the right direction -_- thanks

Once you flash the official sbf, you need to flash the vulnerable recovery to enable you to run openrecovery which is used to flash custom roms and much more.
There is a script which checks your recovery image everytime it boots and replaces it with the original if it finds any changes. So you need to remove that script.
Procedure would be as follows.
1. Download and extract androidiani openrecovery to the root if your sdcard. You should have a update.zip file and openrecovery folder.
2. Flash official sbf.
3. Flash vulnerable recovery sbf. When the phone restarts and before it displays Moto logo, press and hold the 'x' key on your keyboard. You should see a triangle with exclamation mark. Press volume up + camera button and choose apply update menu option.
AOR should load up. Choose console option and type the following commands.
rm - rf /system/etc/install-recovery.sh
reboot
That's all.
Sent from my Milestone using Tapatalk

okay, so it seems i did all the steps EXCEPT flashing the original sbf... wait, the first link you provided was to a an official sbf - correct? then where do i get the vulnerability? or vulnerable_recovery_only_RAMDLD90_78.sbf is it? so, i have original flashed, when trying the vulnerability now it says failed, 0x7100, phone connected. what does that mean?

SuicideTree said:
okay, so it seems i did all the steps EXCEPT flashing the original sbf... wait, the first link you provided was to a an official sbf - correct? then where do i get the vulnerability? or vulnerable_recovery_only_RAMDLD90_78.sbf is it? so, i have original flashed, when trying the vulnerability now it says failed, 0x7100, phone connected. what does that mean?
Click to expand...
Click to collapse
The RAMDLD90_78 is the Vulnerable Recovery.
RSD Lite is a buggy program sometimes. What you need to do is put the sbf you want to flash on the ROOT of your C:/ drive and try it again.

I suppose there's no harm in trying that, i already had to rename it to something shorter, cause it wouldnt even give me the Start button.... brb

skadude66 said:
The RAMDLD90_78 is the Vulnerable Recovery.
RSD Lite is a buggy program sometimes. What you need to do is put the sbf you want to flash on the ROOT of your C:/ drive and try it again.
Click to expand...
Click to collapse
Buddy, please help him out with the rsdlite problem. I presume you had the same problem and someone helped you out, especially with the Windows 7 x64 error.
@SuicideTree : What is your ultimate goal? You want to have a Official ROM on your phone or you want to flash custom roms.

sileshn said:
Buddy, please help him out with the rsdlite problem. I presume you had the same problem and someone helped you out, especially with the Windows 7 x64 error.
@SuicideTree : What is your ultimate goal? You want to have a Official ROM on your phone or you want to flash custom roms.
Click to expand...
Click to collapse
You helped me out with that sileshn!
Yeah, I'll keep this thread up and I'll see what issues he's got.

sileshn said:
Buddy, please help him out with the rsdlite problem. I presume you had the same problem and someone helped you out, especially with the Windows 7 x64 error.
@SuicideTree : What is your ultimate goal? You want to have a Official ROM on your phone or you want to flash custom roms.
Click to expand...
Click to collapse
oh well, i was going for cyanogenmod, but for starters i'd like root to have some more control over my phone
EDIT: it also appears that once again it wont give me the START button, cant press it, moved files around, renamed and stuff... weird
EDIT2: by the way, is it normal for the vulnerability file not to show any file properties in RSD Lite?

SuicideTree said:
oh well, i was going for cyanogenmod, but for starters i'd like root to have some more control over my phone
EDIT: it also appears that once again it wont give me the START button, cant press it, moves files around, renamed and stuff... weird
Click to expand...
Click to collapse
Once you get VR, rooting and flashing a custom ROM is a piece of cake, so it shouldn't be that bad once you get there.

SuicideTree said:
oh well, i was going for cyanogenmod, but for starters i'd like root to have some more control over my phone
Click to expand...
Click to collapse
If you want to flash CM, just install GOT 2.2.1 from here and forget about VR. GOT has VR injected into it. Use the Retail UK sbf.
Once you have CM, you have root.
@skadude : Didn't know it was me.

is cm7 much better over cm6? cause i was looking into that ^^ however if the end goal can be achieved easier with got cm6 i should give that a try, but, what if i wanna play around with this stuff later or something? i'd like to understand what's happening at the moment... anyway, if i go with got solution what are the steps? flash uk sbf, then got or... then cm?
also, got or is better than aor? except apparently having vulnerability alreay in it... anything else?
thanks for all the help, sorry for being not too enlightened, i'll get there ;]]]

[Q] LG Thrill GB w/ClockworkMod Recovery

(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick

Rick Tillery said:
(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick
Click to expand...
Click to collapse
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD

The Dark Lestat said:
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD
Click to expand...
Click to collapse
Thank you for your help!
Rick

Trojan?
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick

There is no virus, Lestat would never do that
Sent from my LG-P925 using XDA

Just my .02 .....Get rid of Symantec !! They are known for scaring people into a virus frenzy.. Yes, it is possible that it is seeing it as a potential virus because shttp is a workaround from the usual porting of windows ip services. ...
Correct me if i'm wrong somebody please !!
Get yourself Comodo and save your money...
Regards,
Dwayne
PS: somebody on here has written a script that just uses shttp temporarily while
your doing the flash procedure, and then reverts your host files back automatically after your done. You should try it.

dwaynedman said:
Just my .02 .....Get rid of Symantec !!
Click to expand...
Click to collapse
Symantec isn't really a choice on work PC.
Get yourself Comodo and save your money...
Click to expand...
Click to collapse
I'm sorry I can't give the link yet, but if you'll Google you'll see Comodo classifies shttp3.exe as "ApplicUnwnt.Win32.ServerWeb.SmallHTTP.~A" or "UnclassifiedMalware" (I guess depending on the version). A number of scanners find issues with shttp3.exe. I'm not saying it is infected, only that it is doing something suspicious.
Rick

Rick Tillery said:
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick
Click to expand...
Click to collapse
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.

Back to square one
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick

The Dark Lestat said:
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.
Click to expand...
Click to collapse
Thank you, sir. I hope it didn't seem accusing.
Rick

Rick Tillery said:
Thank you, sir. I hope it didn't seem accusing.
Rick
Click to expand...
Click to collapse
It's cool, my friend.
Sent from my Samsung Galaxy S II w/ CM9

Rick Tillery said:
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick
Click to expand...
Click to collapse
Is it safe to ignore the su version update?
Short of this, can I override the MD5 checksum? I realize that image could be corrupt, but if I'm just going to replace it with the GB release, does that matter?
Rick

You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne

dwaynedman said:
You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne
Click to expand...
Click to collapse
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick

Rick Tillery said:
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick
Click to expand...
Click to collapse
Remove your battery and keep the phone unplugged
Launch the mobile updater tool
Hold the volume+ button plug the phone in and keep holding the volume+ till the computer downloads the drivers your phone is now in download mode
Once the phone is picked up go to customer support on the LG updater tool and click on recovery phone put your imie number in click check (make sure its the right model) an let the updater tool do its job. Once its done flashing launch into recovery volume- plus power plus 3D button do a complete wipe and factory reset and reboot your phone ... you'll lose cwm and root and be back to full stock
Sent from my LG-P925 using XDA

Bricked?
No joy. Following the steps, the upgrade stopped at 6%. Trying a number of times, it eventually forced me to exit the program (no more restarts). Rerunning the updater (and downloading the 420 MB image yet again on a VERY slow connection) I tried again and again, with different combinations of battery and plug order with power and volume buttons, but nothing worked. Checking elsewhere I found some issues had been reported with Windows Vista/7, so I tried on an XP machine. Now the "Start Updating" bar is red (it was always gray with W7). But now when I try to restore (or even update for that matter), it asks for my S/N (it never did that before) and then says it is "no longer able to upgrade." Reading around, it seems this is an indication of the device being bricked.
Rick

It sounds like you are very close to getting it working Rick.
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Should Rick be trying to run LG Updater as administrator ? I didn't, but it might not hurt.
Regards & Luck,
Dwayne

http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Sent from my ****ty supported LG Thrill

dwaynedman said:
It sounds like you are very close to getting it working Rick.
Click to expand...
Click to collapse
I wouldn't have believed you early this morning, but now maybe...
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Click to expand...
Click to collapse
I tried a bunch of different combinations...none seemed to make the app happy. I finally punted Windows 7 and moved to an XP machine, only to get the "no longer able to update" message. At that point I assumed I was screwed (effectively bricked).
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Click to expand...
Click to collapse
It never really vibrated, but I was able to get back into CMR. Unfortunately NONE of my backups work at all. They all have MD5 checksum failures. I tried a trick I found online and got past that step, only to have it say a failure restoring /system. So much for CMR.
JReeher said:
http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Click to expand...
Click to collapse
Which step? As I mentioned above, I can't even get the first step of the first section (updating the su binary). And if I start at the 3rd section, Symantec prohibits me from using shttp3.exe (I tried to unquarantine it, but it gives a permission error, even as Administrator, when I try to run it), so I'll have to use a different machine.
I was able to reinstall the CM7 3/15 release, so that's something. I was going to restore the stock recovery backup I made, but even that doesn't seem to work. I'm having issue with backups :-(
Rick

i have never been able to restore a backup. i dont know why... but i have tried several times in several different instances.
---------- Post added at 11:56 AM ---------- Previous post was at 11:50 AM ----------
rick tillery, if you want to get your phone back to alive and well i'd suggest doing this:
http://forum.xda-developers.com/showthread.php?t=1558723&page=3
4th post i think

[Q] Having problems running 1 CLICK SBF .906

I actually found a thread on this but it didn't actually fully address the issue. My problem is I rooted my Droid 3 a few weeks ago without any issue using the Motofail method. I actually kept the stock OS, all I did was use Titanium Backup to freeze some apps and I performed the Radiocomm Hack, all without any issue. Well now it is a few weeks later and I notice I'm having some problems with my phone. The stock battery indicator is acting wonky. I plugged in the phone to charge and when I unplugged it, the indicator continued to stay animated like it was still charging. Also when I plugged in the phone to charge yesterday, it appeared to be charging fine but when I unplugged later that evening it actually hadn't charged at all as the battery indicator was not only in the red, but when I went into About Phone in the system setting it also said the battery was at a low percentage. Another issue I'm having is with the sudden disappearance of my Battery and Data Manger within the systems menu. I no longer have any Data Manager setting like I used to have. Infact all it shows when I go into there is what apps are using the most battery power. I don't even have an option to turn of the Background Data anymore or adjust battery saver settings. I'm not sure why all this is happening as I've kept the custom rom and only frozen a few apps that I confirmed to be safe by checking a safe list on several websites. I even went back and unfroze all the apps to see if maybe one of them was causing the issue. The only other thing I did was perform the Radiocomm Hack. Now I did follow a youtube video that told me that I need to apk a datamanagerservice file and also an oek (?) datamanager service file and also I had to go into Root Explorer and delete a database file of some kind. According to the gentleman who made the video, these were tracking programs that might be able to detect the radiocomm hack or some how detect that the phone was using tether. After everything was done in the video and I performed the hack, it worked perfectly. My phone worked fine and the the tethering was fine. Now a few weeks later and I'm having the problems I mentioned above. To fix this I decided I would unroot my phone and return it to factory setting then reroot again. To do this I decided to go with Overlay's 1-Click SBF.exe method. I did have the same problem as another poster in that the file had some sort of extended name on it (-dl=1). This prevented my computer from being able to read the file or recognize it. So I did what that post suggested and I deleted the "-dl=" part so that it said 1_CLICK_SBF.exe and low and behold it fixed the file. It went from a white paper icon to the green android man icon so I thought everything was ok. Well then I go to run the program and I keep gettin this "some files are corrupted" message "please close and find another download' or something of that nature. I've tried several times to redownload this file and I still keep getting this error. I tried disabling my virus protections and fire walls but still nothing worked. Can someone please tell me what I'm doing wrong and how I can get this working again. I'm not even sure if it's something with root that is causing my phone to act up, it could be the phone is bad which mean I need to contact the person I bought it from and send it back but I can't do that until I unroot the phone, return it to factory settings and see if that takes care of the battery issue and restores my data manager/battery settings to the system menu. Thank you in advance to anyone who can help me out with this.

fanofhan said:
I actually found a thread on this but it didn't actually fully address the issue. My problem is I rooted my Droid 3 a few weeks ago without any issue using the Motofail method. I actually kept the stock OS, all I did was use Titanium Backup to freeze some apps and I performed the Radiocomm Hack, all without any issue. Well now it is a few weeks later and I notice I'm having some problems with my phone. The stock battery indicator is acting wonky. I plugged in the phone to charge and when I unplugged it, the indicator continued to stay animated like it was still charging. Also when I plugged in the phone to charge yesterday, it appeared to be charging fine but when I unplugged later that evening it actually hadn't charged at all as the battery indicator was not only in the red, but when I went into About Phone in the system setting it also said the battery was at a low percentage. Another issue I'm having is with the sudden disappearance of my Battery and Data Manger within the systems menu. I no longer have any Data Manager setting like I used to have. Infact all it shows when I go into there is what apps are using the most battery power. I don't even have an option to turn of the Background Data anymore or adjust battery saver settings. I'm not sure why all this is happening as I've kept the custom rom and only frozen a few apps that I confirmed to be safe by checking a safe list on several websites. I even went back and unfroze all the apps to see if maybe one of them was causing the issue. The only other thing I did was perform the Radiocomm Hack. Now I did follow a youtube video that told me that I need to apk a datamanagerservice file and also an oek (?) datamanager service file and also I had to go into Root Explorer and delete a database file of some kind. According to the gentleman who made the video, these were tracking programs that might be able to detect the radiocomm hack or some how detect that the phone was using tether. After everything was done in the video and I performed the hack, it worked perfectly. My phone worked fine and the the tethering was fine. Now a few weeks later and I'm having the problems I mentioned above. To fix this I decided I would unroot my phone and return it to factory setting then reroot again. To do this I decided to go with Overlay's 1-Click SBF.exe method. I did have the same problem as another poster in that the file had some sort of extended name on it (-dl=1). This prevented my computer from being able to read the file or recognize it. So I did what that post suggested and I deleted the "-dl=" part so that it said 1_CLICK_SBF.exe and low and behold it fixed the file. It went from a white paper icon to the green android man icon so I thought everything was ok. Well then I go to run the program and I keep gettin this "some files are corrupted" message "please close and find another download' or something of that nature. I've tried several times to redownload this file and I still keep getting this error. I tried disabling my virus protections and fire walls but still nothing worked. Can someone please tell me what I'm doing wrong and how I can get this working again. I'm not even sure if it's something with root that is causing my phone to act up, it could be the phone is bad which mean I need to contact the person I bought it from and send it back but I can't do that until I unroot the phone, return it to factory settings and see if that takes care of the battery issue and restores my data manager/battery settings to the system menu. Thank you in advance to anyone who can help me out with this.
Click to expand...
Click to collapse
I also just want to add that I did load the phone into App Fast Mode without any problems and everything was ok. It's just when it came time to actually run the 1 Click file, I kept getting the message about parts of the zip being corrupted and to please find another download. Also I should add that I am on the .906 ota, 2.3.4, kernel 2.6.35.7-g5a4155.

There is now a full SBF zip download for 5.7.906 that you can flash with RSD Lite; see here: http://forum.xda-developers.com/showpost.php?p=39268610&postcount=241
I used it last week without issue. I unzipped the file first to make sure that it was a good download (a bad download will not unzip properly.)
[edit: here is a good "how-to" for RSD Lite: http://wiki.howardforums.com/index.php/How_to_flash_with_RSD_lite ]
You may want to make sure that you have a well-charged battery. Amazon sells a Motorola external charger if your phone does not charge the battery properly. http://www.amazon.com/Motorola-Battery-Charger-Series-Batteries/dp/B005LFXBJ6

doogald said:
There is now a full SBF zip download for 5.7.906 that you can flash with RSD Lite; see here: http://forum.xda-developers.com/showpost.php?p=39268610&postcount=241
I used it last week without issue. I unzipped the file first to make sure that it was a good download (a bad download will not unzip properly.)
[edit: here is a good "how-to" for RSD Lite: http://wiki.howardforums.com/index.php/How_to_flash_with_RSD_lite ]
You may want to make sure that you have a well-charged battery. Amazon sells a Motorola external charger if your phone does not charge the battery properly. http://www.amazon.com/Motorola-Battery-Charger-Series-Batteries/dp/B005LFXBJ6
Click to expand...
Click to collapse
First of all thank you for the reply because I really need help. The only way i've been able to do anything to my phone is mostly by watching youtube videos and following along. In other words I am a complete idiot to all of this and have no idea what i'm doing. With regards to your response about RSD Lite, I did go to the how to link but I still don't understand what to do. Unfortunately I don't have internet at my house so I can't even begin to attempt the rsdlite thing until tonight. I just feel like my nerves are shot. Nothing on this phone is working right. Infact im beginning to wonder if there is something wrong with the phone itself. This is the second d3 I've had and all the things i'm doing to this phone I did to the last and i'm having nothing but problems and I've done nothing major to the phone. I just tried tethering so I could access the internet on my laptop so I can try to fix this now and apparently the radiocomm hack didn't work either. It worked fine on my other droid3 that i ended up giving to my mom. Im beginning to think that the seller I purchased this phone from on ebay, lied about this phone not being. Refurbished or ever activated. Heck I knew it wasn't because it came already loaded with the. 906 update. Now if I can figure out how to factory restore I can see if I can get it working properly.

what is your battery level at, files will not flash if battery is too low
could cause the errors you are seeing
Sent from my Clear using xda premium

sd_shadow said:
what is your battery level at, files will not flash if battery is too low
could cause the errors you are seeing
Sent from my Clear using xda premium
Click to expand...
Click to collapse
Well a little while earlier my extended battery was in the red. Again I think this is a software issue as im sure the battery is good. Anyway I googled a fix and someone else who had the same issue accessed the Battery Manager app in settings and cleared the cache and the battery started to charge again. I cleared the cache and did a force sto then plugged the phone up and it hasn't died yet but im afraid to unplug the phone so im leaving it charged until I leave tonight to see if the battery charges. I do have the original battery as a bak up which when I placed it in the phone briefly this morning was at 80 or 90% so I think im ok battery wise. Im just freaking out about how to fix this. I know nothing about flashing roms or rsdlite or anything like that. I literally rooted the phone, froze some apps and did the radiocomm hack which doesn't seem to have worked with this phone. I just don't understand why this is happening. This all went perfectly without a hitch on the other droid 3 I had before I gave it to my mom and bought another one. Is there an easier way to unroor and restore to stock besides using rsdlite/ I don't know why Overlay's 1 click. 906.exe file is coming up as corrupted. That seemed like an incredibly easy fix. This rsdlite fix sounds incredibly complicated and as I said im an idiot to this kind of thing. I listen to the real creative geniuses and try to do what you all do.

rsd lite is very simple
download xml file
download rsd lite and install
down load moto drivers and install
open rsd lite
select the '...' button, select the xml file
boot phone to AP Fastboot, connect to pc
wait for windows to find correct drivers
select start on rsd lite, let it install xml file (10-25 min)
when rsd lite is done it will try to reboot phone,
if phone gets stuck in bootloop, wipe data in recovery and reboot
done
---------- Post added at 01:20 PM ---------- Previous post was at 01:15 PM ----------
How To Flash xml recovery files with RSD Lite
but you can not flash with a low battery, if software is corrupt battery will not charge
buy a Motorola Programing Adaptor by Team Black Hat
or Battery Desktop Charger for Motorola Droid 3 XT862

What are xml files and where do I get them? Are they specific to rsd lite or I have no idea what you're talking about with regards to xml files and which ones im supposed to download. Are you refering to the latest moto drivers for my device or some other drivers I need to download to run rsd lite? Seriously, explain it to me like you would to your 80 year old grandmother if you had one (unless you do have one). I usually watch videos of people doing what I need to do and I follow what they're doing so.....yeah i'm THAT noob.

read my how to flash xml file with rsd lite
links to every thing there
Sent from my Clear using xda premium

Ah, ok. Ill check out your link about the xml filed tonight as well as looking into downloading one of the battery apps you were talking about but the good news is that I do have a spare battery incase the one in the phone now proves not to be charging. Do you have any idea why this would be happening? I did the exact same stuff on another droid 3 and everything was fine. The first phone which I bought from a person who was upgrading did great yet this one that I bought froma verizon dealer on ebay is acting up. This phone came with stock screen cover and all the booklets and sealed battery charger and everything. I know the box wasn't sealed but with the exception of the. 90ynupdate already installed t, the phone appeared to have not been used. Is it possible that I wont be able to restore phone back to original. 890 stock that was shipped originally? I'm just trying to understand what could of happened so I know its not a faulty phone issue. Thank you Shadow for being so helpful, thank both of you that have responded. Please keep them coming lol!

fanofhan said:
Ah, ok. Ill check out your link about the xml filed tonight as well as looking into downloading one of the battery apps you were talking about
Click to expand...
Click to collapse
battery apps, will not help, and I did not suggest any
but the good news is that I do have a spare battery incase the one in the phone now proves not to be charging. Do you have any idea why this would be happening?
Click to expand...
Click to collapse
if software is corrupt, phone can not charge battery, just that simple
... Is it possible that I wont be able to restore phone back to original. 890 stock that was shipped originally?
Click to expand...
Click to collapse
even if 906 one click works, it flashes an unstable repacked 890, and recommended that 906 update is installed as part of the system restore

Yes im sorry, I had misunderstood you initially. I did have a chance to view the links so I realized what you meant after my post. Yes, I am also aware of the software possibly being corrupt, I just meant that fortunately I have z spare battery that I can pop in and use during the rsdlite fix but it does appear that my extended battery is charging since I emptied battery manager cache and force stopped. I will take it with me just in case though should I need to switch them out before I make the attempt tonight. Also I aware that the 1 click method would only be a temporary backup to .890 and that I would need to perform an update but I am just eager to see if my phone will revert back to. 890 because it came to me from a verizon authorized dealer with the latest update already installed even though they told me the phone had never been activated. It just makes me wonder if some how the operating system is locked from reverting to. 890 somehow. I just want to be able to return the phone to the condition it was when it arrived to me which was unrooted with the latest update already installed and all software functioning normally.

fanofhan said:
Yes im sorry, I had misunderstood you initially. I did have a chance to view the links so I realized what you meant after my post. Yes, I am also aware of the software possibly being corrupt, I just meant that fortunately I have z spare battery that I can pop in and use during the rsdlite fix but it does appear that my extended battery is charging since I emptied battery manager cache and force stopped. I will take it with me just in case though should I need to switch them out before I make the attempt tonight. Also I aware that the 1 click method would only be a temporary backup to .890 and that I would need to perform an update but I am just eager to see if my phone will revert back to. 890 because it came to me from a verizon authorized dealer with the latest update already installed even though they told me the phone had never been activated. It just makes me wonder if some how the operating system is locked from reverting to. 890 somehow. I just want to be able to return the phone to the condition it was when it arrived to me which was unrooted with the latest update already installed and all software functioning normally.
Click to expand...
Click to collapse
It's possible that the Droid 3 was never used. When a new update is released, the manufacturers tend to ship phones with updated software, rather than having the user go through an over the air update almost immediately.
A Droid 3 that has had 5.7.906 installed on it cannot revert back fully to an older version - the locked bootloader prevents it. I believe that the 1-click installs the system of the older version, as that can be managed, and then allows you to have the 5.7.906 upgrade installed, which you should do right away.
However, at this point I'd stay away from 1-click. This link has the SBF file that you need: http://sbf.droid-developers.org/cdma_solana/list.php
It's the third in that table, under the column "download", on the line with "5.5.1_84_D3G-66_M2-10
Blur_Version.5.7.906.XT862.Verizon.en.US" as the system build number.
You will download a zip file called VRZ_XT862_5.5.1_84_D3G-66_M2-10_1FF_01a.xml.zip. As you can tell by the name of the file, that file is a zip file. When you extract it, it will expand to 17 files, including one called VRZ_XT862_5.5.1_84_D3G-66_M2-10_1FF_01a.xml - this is the file that you will be looking for when you follow sd_shadow's instructions for RSD Lite.
In fact, just to be complete, the files that will be expanded are:
VRZ_XT862_5.5.1_84_D3G-66_M2-10_1FF_01a.xml
allow-mbmloader-flashing-mbm.bin
boot.img
cdrom
cdt.bin
device_tree.bin
ebr
emstorage.img
lbl
logo.bin
mbm.bin
mbmloader.bin
mbr
preinstall.img
radio.img
recovery.img
system.img
Click to expand...
Click to collapse
RSD Lite uses the .XML file as a list of instructions about what to do with the rest of the files.

Thank you doogald, I'm about to begin downloading the stuff I need now so that I can begin. I'm hoping everything runs smoothly since I have to have this completed by the end of my shift in the morning. I really don't want to have to stay here all day tomorrow using my employers internet to try and figure this out. Thanks both of you guys for all your help. I'll let you know how it turns out. Geez, I hope it turns out right..

Ok so right now I already feel like screaming in frustration. I can't seem to find an RSD Lite download file. The RSDlite.rar download link that I found here on XDA, doesn't work on my computer, the same as the 1 click method. I did find a download on a sight called Tucows for RSDlite 5.7 but it seems to be stuck in the "installing" phase. I went to the link that Shadows posted, taking me to the how to page for RSD Lite but again, the link there took me to the XDA link, which doesn't work. The Tucows download for RSDLITE 5.7 is showing a Window that says Windows Mobility, and it has a light blue bar that is completely full but all it says is "RSDLITE is being installed" it doesn't appear to be doing anything else. I guess I can close it and try installing it again. Ok I tried downloading the Tucows 5.7 download again but it tells me the file did not install properly the first time and I need to try installing. What is going on? I am trying to reinstall it again. Why is nothing working for me, why is everything being so difficult. I'm trying to not have a melt down but seriously, why can't I find any files that work? They all seemed to be working at some point and are working for other people right now. I need help finding a working file I think.

what version of windows?
i have several links on my main page
sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs.... https://docs.google.com/document/d/1Goawxdx_UBF4Y8lqzHYWf8Ha3yUcRK4faq0UWIlXLWA/edit
Sent from my MILESTONE3 using xda premium
---------- Post added at 01:17 AM ---------- Previous post was at 01:14 AM ----------
try this one http://d-h.st/rLK
Sent from my MILESTONE3 using xda premium

Why can't I find a file that works?? None of the .rar files work. They all download and then have a paper icon and when I try to open and extract the files I get an error page about windows not being able to identify the files or something and then it asks me what program I want to use to open the download. The only one that unzipped was the Tucows file and that was an RSDLite5.7.msi (whatever that means) and when I extract the files and attempt the download it's a Windows Installer which I run and it looks like it's going to work but then it just stops doing whatever it's doing and does nothing until I close it at which point it asks me if I'm sure I want to close because the installation isn't complete. What is going on?? I can't believe I've been trying to find a working RSDlite file for the last 2 hours. I thought I'd be done by 3:30 and here it is 2:20am and I haven't even gotten to the first step yet because I can't find any working download.

i never let window unzip file, try 7zip link in my main page
.msi is a microsoft installer works like. exe, except alittle different
Sent from my MILESTONE3 using xda premium

sd_shadow said:
what version of windows?
i have several links on my main page
sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs.... https://docs.google.com/document/d/1Goawxdx_UBF4Y8lqzHYWf8Ha3yUcRK4faq0UWIlXLWA/edit
Sent from my MILESTONE3 using xda premium
---------- Post added at 01:17 AM ---------- Previous post was at 01:14 AM ----------
try this one http://d-h.st/rLK
Sent from my MILESTONE3 using xda premium
Click to expand...
Click to collapse
I'm running Windows Vista Home Premium SP 2 64bit, I'm checking your page now Shadow. Bless you for replying.

ok vista 64 should be fine
Sent from my MILESTONE3 using xda premium