So folks, its a little bit too late, i know, but i made a flashable zip of stock kernel from the China FW. It contains all the necessary modules, etc.. It contains all the necessary files that the tab falls to sleep after l2_hsic going crazy. This solve the unnecessarily high battery drain since Android 4.0.4 aka ICS was published by samsung. Is intended for those who have no desire to a custom kernel.
But notice this kernel is not overclockable, should work with any firmware and this requires root to flash the kernel.
PS: But this kernel is only for the 3G versions (GT-P7500/7501), why only the 3G models are equipped with the high battery drain.
What do I need?
- The kernel
- Root ->look here
-> Do you have ICS on it, point ranges 2 and 3
-> You still have Honeycomb on it, start from step 1
- a custom recovery -> for example here
- wherewithal basic knowledge -> Look at the forum or ask at Aunt Google.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Downloads
GT-P750X (3G and WiFi)
Its attached
How do i flash the kernel?
- download the kernel and flash it through your custom recovery
- Of course only interesting if you are already using TWRP or CMW.
Click to expand...
Click to collapse
Flash through CWM / TWRP
You place the zip on the internal memory or external SD card.
- To boot into recovery, hold volume down when you restart
- Go to "install zip from sd card", depending on the type of recovery (CWM)
-> Or just install (in TWRP)
- look for the folder where you have placed the zip
- And flashes this now by clicking on yes in CMW or slide to the right with TWRP.
- Then reboot and kernel you got it.
Click to expand...
Click to collapse
Important
This kernel is to be used only with ICS!!
Click to expand...
Click to collapse
Important 2
Before you flash this stuff, made a backup (Nandroid) of your system. Only if something goes wrong, this make sure you can restore your old system again. I 've tested it, but you never know.
Click to expand...
Click to collapse
Credits:
Samsung, for there bugfree chinese kernel
and "stiffmeister", for found out which kernel is not effected by l2_hsic bug
PPS: I testet it with the Hungary FW without this kernel. After 1 hour the bug came back.:silly: So i flashed this kernel again and it works like charme. So it should work with any other FW.
Hey thanks man. So now we finally have the fix for ICS and JB ROMs.
Sent from my GT-P7500 using XDA Premium HD app
Ok was on cm10.1 moved back to stock, installed custom recovery and this kernel and still seem too have the occasional flash which was the reason I decided to move back to stock. Any ideas?
Sent from my GT-P7500 using Tapatalk 2
Maybe try a different bootloader.
As far as I am aware I have never updated the boot loader. Any ideas Where I would get the stock ics boot loader
Sent from my GT-I9300 using Tapatalk 2
From here. Choose your device folder and flash the tar via Odin with pda on your pc. If you are having a wifi device, the zip must be extracted before you flash it via odin. But i think you have a 3G device. Otherwise you dont be here in this thread.
Wow i forgot how much long the galaxy tab could hold on. I was on A1 and Yoda's kernel and was kinda used of charging my tablet every 2-3 days. But man, im glad i flashed stock, this is so smooth no need to overclock and it lasts way longer on my device. I doubled my battery life and it stays on for days almost weeks with daily use. Sad to say to developpers but stock is really amazing on ICS.
I really recommend giving stock kernel a second chance. Im blown away, thanks for posting this!
Sent from my GT-P7500R using XDA Premium HD app
ren2008 said:
Wow i forgot how much long the galaxy tab could hold on. I was on A1 and Yoda's kernel and was kinda used of charging my tablet every 2-3 days. But man, im glad i flashed stock, this is so smooth no need to overclock and it lasts way longer on my device. I doubled my battery life and it stays on for days almost weeks with daily use. Sad to say to developpers but stock is really amazing on ICS.
I really recommend giving stock kernel a second chance. Im blown away, thanks for posting this!
Sent from my GT-P7500R using XDA Premium HD app
Click to expand...
Click to collapse
You do know that the wakelock issue is already fixed right? Now in almost every JB ROM(except for those no longer updates ones) no more l2_hsic wakelock. For ICS custom ROMs, use A1 kernel.
Sent from my GT-P7500 using Tapatalk HD
I appreciate the effort ,just installed it this afternoon and I can see the effect perfectly, all deep sleep,not one minute at 200mhz. All of it without too much hassle. Thanks to you!
We're lucky android is so open and has a great community,depending on Samsung alone is not recommended.
Thank you
Thank you also from me. Works percfectly!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
-----------------------
Prerooted incl. ADB root
Deodex
UA String
AdFree Hosts (No More Ads)
Themed
Installation ( More detailed on http://stefan-developer.us/2011/08/broodcomb-gt-p7500-xwkg9-3gromcwm/ )
-----------------------
(If coming from XWKG9 STOCK, Skip to step 5.1)
1. Download Stock Rom P7500-XWKG9 EUR 3G Only http://www.multiupload.com/SGV6N78YY7 [password: samfirmware.com] (Source http://www.samfirmware.com/)
2. Download ODIN3 V1.85 http://forum.xda-developers.com/attachment.php?attachmentid=581913&d=1304094576
3. Extract stock rom somewhere on your computer also Odin, run Odin and don't touch anything except PDA where you will select previously extracted stock file.
4. Put Tab in Download mode, connect tab to computer, power off, hold power off and volume - till you see two icons then press volume + and if it ask are you sure pres volume + one more time and you are in download mode then ( order of buttons is _power_ _volume -_ _volume+_ )
5. You should see yellow background on first box of odin and that is good your Tab is ready to flash, then click start on ODIN and wait till it reboot.
5.1 Boot in recovery ( Because stock doesn't have if you was following from step one do the root your Tab, as it is on this topic, so download this and put it on the sdcard, then put your Tab to Recovery mode power off, hold power off and volume - till you see two icons then press volume - ,then volume + and you should go to apply update zip file and you will select this file and when it is done you should reboot your device. )
6. Make a nandroid backup
7. Wipe data/factory reset
8. Flash BroodComb Alpha
9.Reboot and enjoy
Boot will take a while coz cache is cleared also factory mode is reseted so don't worry everything is fine.
--------------------------------
Screens
some screenshots would be nice!
Back in a flash ! =)
Nice stuff and a screenie idd would be nice
Sent from my GT-P7500 using Tapatalk
Seems to be fine men, much appreciate <3
Sent from my GT-P7500 using Tapatalk
Very nice work man. Keep on improving it, i'll be happy to test.
Just a clarification, is it me or a valid kernel for overclocking purposes is NOT available yet for the P7500?
Will make some screens when i get home sorry i was in hurry, regarding OC i think we will not see that coze source code for our kernel is not yet released...pity :/
Sent from my R800i using XDA Premium App
Never mind... sorted it out
Excuse me if this question looks stupid , what is meant by "flashing" in the eighth step? Is flashing using Odin or CWM? I'm already hv xwkg9 root and cwm installed. thanks
Sorry for my bad english..
will try this after download finish
tedbears said:
Excuse me if this question looks stupid , what is meant by "flashing" in the eighth step? Is flashing using Odin or CWM? I'm already hv xwkg9 root and cwm installed. thanks
Sorry for my bad english..
Click to expand...
Click to collapse
Cwm you should use Recovery mode = CWM , Download mode = Odin, np you are free to ask..we don't want to brick your tab...
Sent from my R800i using XDA Premium App
ca110475 said:
Just a clarification, is it me or a valid kernel for overclocking purposes is NOT available yet for the P7500?
Click to expand...
Click to collapse
Please could someone return a answer to his/her question?
Thank you very much.
Fianlly, first custom 3G rom. Thank you for this mate. Is it possible to have pure HC rom without crapwiz?
Thx
Sent from Galaxy Tab 10.1
mr_at_sgs said:
Please could someone return a answer to his/her question?
Thank you very much.
Click to expand...
Click to collapse
I already answered his question, we don't have source for karnel so you can't compile it..it is simply as that..i can change in properties but kernel will not allow it we need to wait for the kernel... stupid samsung
secretfile said:
I already answered his question, we don't have source for karnel so you can't compile it..it is simply as that..i can change in properties but kernel will not allow it we need to wait for the kernel... stupid samsung
Click to expand...
Click to collapse
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Might be a silly question from new 10.1 3G 16GB user but i have to ask since custom roms are developed.
My version is GT-P7500XXKG7 - can I safely flash XXKG9 on that device?
receptorB said:
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Click to expand...
Click to collapse
I wonder from where on earth he got the source code, i doubt he disassembled it , but i am ready to try it out it simply can't harm also overcloock would be nice
wojmzy said:
Might be a silly question from new 10.1 3G 16GB user but i have to ask since custom roms are developed.
My version is GT-P7500XXKG7 - can I safely flash XXKG9 on that device?
Click to expand...
Click to collapse
Sure you can i was on it first time then flash it over with ODIN... so it is safe...
receptorB said:
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Click to expand...
Click to collapse
Hmm i tryed that kernel but somehow on my device 3g [GT-7500 not 10.1V] was not working.. maybe my tab is isolated problem?? can someone verify that his kernel is working?
Can you please post that sick wallpaper? And any others that you may have included? Haven't decided if I want to switch ROMs just yet and couldn't find the wallpapers in the zip...
Thanks!
I've been looking at the threads, but apparently every ICS official Samsung ROM is still dangerous, right?
I'm on CM9, but I find myself missing some of the advanced stylus functionality, and HW media acceleration is iffy, at best. I'd like to go back to an official ROM, but now GB feels sooo slow...
Rumours of 4.0.4 soon!
check my words, but speedmod or franco kernels should make it safe
I tried the Speedmod and Franco kernels, but both were more trouble than it was worth CM9 works perfectly well, I'm just missing several features of the official release.
fjhuerta said:
I tried the Speedmod and Franco kernels, but both were more trouble than it was worth CM9 works perfectly well, I'm just missing several features of the official release.
Click to expand...
Click to collapse
well the latest two Franco kernels seem to have some issues, and unfortunately Franco is MIA, but speedmod seems perfectly working so far, did not see any complaints there recently
p107r0 said:
speedmod seems perfectly working so far, did not see any complaints there recently
Click to expand...
Click to collapse
Plus one.
Just updated to K3-6 myself. Ive used franco kernel before but found it too 'bleeding edge' for my tastes.
Speedmod ICS kernel is what you are looking for, safe stable and full tw support. Just be sure to do your full-wipe from within in GB beforehand to reduce the possibility of issues.
Sent from my GT-N7000 using xda app-developers app
+2
Not sent from an i phone....cos im not a fanny
Being SpeedMod user since Samsung Galaxy S 1, 2 and up to Not's K3-6. The best around for safety and stability and battery life.
Stuck speedmod on my note just over a day ago to make it 'safe' and I've been really impressed. If you want ICS (and can risk superbrick) on the note I'd recommended it. Its even improved my battery life...
ok
i have rooted ics stock rom
what is the best way to install speedmod?
fjhuerta said:
I've been looking at the threads, but apparently every ICS official Samsung ROM is still dangerous, right?
I'm on CM9, but I find myself missing some of the advanced stylus functionality, and HW media acceleration is iffy, at best. I'd like to go back to an official ROM, but now GB feels sooo slow...
Click to expand...
Click to collapse
Just flash ICS ROM with PC Odin. It's 100% safe...
guys one information which i want to share with you
yesterday i put mail to CEO of samsung mobile and told every thing related to faulty ics firmware, kernel prob, emmc-brickbug prob and all information about the user who had bricked their device
today i got call from SSC the person to whom i was taking told me that there is nothing to worry about ics firmware and kernel does not contain any fault like this both sgs2 and note are highly up gradable set and to upgrade note you should have speed of 3.0 mbps if you upgrade it through kies or upgrade it from service center and if there is any prob found after update samsung technician are ready to help us
one thing more as everyone know that ics has more battery drain prob and gb does not so there is nothing to worry about and rooting the device is third party software and samsung does not provide any help if you root your device and got it bricked so be care full and enjoy upgrading
btw- upgrading is at your own risk if you do it manually
i think so~
i am using 4.04~ but when i use "GotBrickbug-v1.1.apk"
it's also
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
meethere said:
ok
i have rooted ics stock rom
what is the best way to install speedmod?
Click to expand...
Click to collapse
If u have rooted stock rom, you can install speedmod kernel by using mobile odin.
Sent from my GT-N7000 using xda premium
HI I want to install the KingDroidICSROM and other ROM but none of them work and i dont know why it either end up in boot loop
or restart in recover mode...
i recently started my first android which is galaxy 9003 and switch to my second galaxy note
i still can root it and get super user and install CM9 but what i really want is
i want a custom ROM but with all the samsung apps in it and the main thing i wanna do is
to OC it to at least 1.7 GHZ for daily use or maybe even 1.8 until note 2 is out
this is what i have now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
starcraft2010 said:
HI I want to install the KingDroidICSROM and other ROM but none of them work and i dont know why it either end up in boot loop
or restart in recover mode...
i recently started my first android which is galaxy 9003 and switch to my second galaxy note
i still can root it and get super user and install CM9 but what i really want is
i want a custom ROM but with all the samsung apps in it and the main thing i wanna do is
to OC it to at least 1.7 GHZ for daily use or maybe even 1.8 until note 2 is out
this is what i have now
Click to expand...
Click to collapse
Hey man whatever question you got ask it in the Q&A..this section is for development buddy...please read forum rules and remove this thread...and to the two posters above me, please be polite guys no need to be rude all the time..treat a new guy with respect!
Sent from my GT-N7000 using xda premium
*reported* Mods plz delete or move!
Whatever be it a new guy or noob.....u are on xda...first read....then search xda and google.......i bet you will get it...but still if u don't get the info then create a thread in the CORRECT section!
OC to 1.8ghz and you can't flash a rom rofl u serious ?
Sent from my GT-N7000 using xda app-developers app
people always want an easy quick fix
go to question section friend
But try flasgin my 3.4 Resurrection rom
http://forum.xda-developers.com/showthread.php?t=1618705
you might have problems with locked bootloaders since you have a stock XXLRB ROM there
GTN? Seventy thousand? You were in the About screen man, and you didn't remember your own model...?
Aaaaaaaanyway, enough with flaming, at least from me.
What you need to do is : perform a full wipe (make sure you flashed NoteCore kernel first) in Recovery, then flash CleaNote (in Recovery). Then reboot. That should not result in a boot loop .
So, flash THIS (kernel). Then THIS (ROM). Then THIS (that's a fix). Then flash the kernel you flashed earlier, again. Then wipe cache and dalvik. Then reboot.
And regarding your desire to have THAT high overclock... There's a NoteCore kernel variant which overclocks the CPU to 1.6 GHz and the GPU to 400 MHz (CPU is stock clocked at 1.4 GHz, GPU at 267 MHz). That's pretty high, if you ask me. Besides, I'm sticking to the standard version (stock frequencies), and this thing is blazing fast... so... unless you want to tie your phone to 3-9 external monitors to play NFS The Run, no, you don't need overclocking...
Formhault said:
GTN? Seventy thousand? You were in the About screen man, and you didn't remember your own model...?
Aaaaaaaanyway, enough with flaming, at least from me.
What you need to do is : perform a full wipe (make sure you flashed NoteCore kernel first) in Recovery, then flash CleaNote (in Recovery). Then reboot. That should not result in a boot loop .
So, flash THIS (kernel). Then THIS (ROM). Then THIS (that's a fix). Then flash the kernel you flashed earlier, again. Then wipe cache and dalvik. Then reboot.
And regarding your desire to have THAT high overclock... There's a NoteCore kernel variant which overclocks the CPU to 1.6 GHz and the GPU to 400 MHz (CPU is stock clocked at 1.4 GHz, GPU at 267 MHz). That's pretty high, if you ask me. Besides, I'm sticking to the standard version (stock frequencies), and this thing is blazing fast... so... unless you want to tie your phone to 3-9 external monitors to play NFS The Run, no, you don't need overclocking...
Click to expand...
Click to collapse
thanks for your suggestion i dont really need to OC that much just want to try it that all
as for custom rom which is the first thing i want to try is to use some nice custom rom i find here... but so far the only custom rom i can use is the CM9 or the samsung stock rom... and i want to see if it possible to use custom rom and be able to keep all the samsung apps at the same time
starcraft2010 said:
u started first not me punk
Click to expand...
Click to collapse
Lol? I didn't insult *you*.
I helped you, actually.
Sent from my GT-N7000
Formhault said:
Lol? I didn't insult *you*.
I helped you, actually.
Sent from my GT-N7000
Click to expand...
Click to collapse
you can ask nicely next time
starcraft2010 said:
you can ask nicely next time
Click to expand...
Click to collapse
Just... gtfo.
Sent from my GT-N7000
cant resist:
In Before Lock
Just made it buddy.
Closed.
I was searching some russian forums and i came across these two jelly bean kernels/
I am just sharing my finds here, i did nothing to help develop it, nor have i tried it.
http://narod.ru/disk/64784915001.0b09fa551aa2d9724ca8a828c2a241e1/kernel_3_cm.zip.html
http://narod.ru/disk/65150912001.4494934c3f13a85f2a90d00887422346/JB_KernelV3-0.zip.html
Google translate might help
spazzy1912 said:
I was searching some russian forums and i came across these two jelly bean kernels/
I am just sharing my finds here, i did nothing to help develop it, nor have i tried it.
http://narod.ru/disk/64784915001.0b09fa551aa2d9724ca8a828c2a241e1/kernel_3_cm.zip.html
http://narod.ru/disk/65150912001.4494934c3f13a85f2a90d00887422346/JB_KernelV3-0.zip.html
Google translate might help
Click to expand...
Click to collapse
have u tested them?
backing up rom now and ill try both with the unofficial cm10 and report back.
OK - tested the "V3" one so far, exactly the same as the "Unofficial CM10" kernel it seems, almost identical performance in benchmark - video recording not working, panorama glitchy but camera works fine - identical overclock settings and governors.
second one coming up now.
OK - second one doesnt boot. stuck on boot logo.
UPDATE - interesting, i switched the boot.img from the V3 kernel to the other one, and now it boots but wifi doesnt work.
ok got wifi working - gallery doesnt work with the second kernel, video and panorama same as other kernels. overclock and governors identical aswell.
overall - stick with the kernel youre on now.
(i only tested these with the Unofficial CM10 rom)
Is the first kernel working with cyanx vivo rom? Plz reply it's some one tried our
Sent from my Incredible S using xda app-developers app
djbenny1 said:
backing up rom now and ill try both with the unofficial cm10 and report back.
OK - tested the "V3" one so far, exactly the same as the "Unofficial CM10" kernel it seems, almost identical performance in benchmark - video recording not working, panorama glitchy but camera works fine - identical overclock settings and governors.
second one coming up now.
OK - second one doesnt boot. stuck on boot logo.
UPDATE - interesting, i switched the boot.img from the V3 kernel to the other one, and now it boots but wifi doesnt work.
ok got wifi working - gallery doesnt work with the second kernel, video and panorama same as other kernels. overclock and governors identical aswell.
overall - stick with the kernel youre on now.
(i only tested these with the Unofficial CM10 rom)
Click to expand...
Click to collapse
Thanks for your time and effort :3
now with these kernels, is it possible to re engineer them? or rebuild them?
Jam4l said:
have u tested them?
Click to expand...
Click to collapse
Yeah he tested them. If you bothered to read the op it says they both work amazingly good and oc at 15.8 ghz allowing you to microwave hot dogs to fully cooked in 3.4 seconds. Just make sure you flash a new radio and pull your battery out halfway through the installation or else it wont work!
Sent from my Incredible S using xda premium
itsbeertimenow said:
Yeah he tested them. If you bothered to read the op it says they both work amazingly good and oc at 15.8 ghz allowing you to microwave hot dogs to fully cooked in 3.4 seconds. Just make sure you flash a new radio and pull your battery out halfway through the installation or else it wont work!
Sent from my Incredible S using xda premium
Click to expand...
Click to collapse
You forgot to mention you had to flash the desire HD bootloader too.
spazzy1912 said:
You forgot to mention you had to flash the desire HD bootloader too.
Click to expand...
Click to collapse
I am afraid that will brick the phone potentially
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone screenshot the about phone page please? I am curious to know whether this is just szeszo's or dla's kernel?
markj338 said:
I am afraid that will brick the phone potentially
Someone screenshot the about phone page please? I am curious to know whether this is just szeszo's or dla's kernel?
Click to expand...
Click to collapse
LOL Mark.....
markj338 said:
I am afraid that will brick the phone potentially
Someone screenshot the about phone page please? I am curious to know whether this is just szeszo's or dla's kernel?
Click to expand...
Click to collapse
just a small chance
This is a stock, pre-rooted BASE ROM with init.d support baked in. It includes the latest boot.img and radio img. Nothing more, Nothing less. Great base to build from or run as is. Anyone can use this and do whatever they want with it. Please remember to give credit where credit is due!
Speaking of credits...Thanks Mhous33 for the base I made this from!!
Get it Here: <MODERATOR EDITED - SITE REGISTRATION TO DOWNLOAD IS FORBIDDEN ON XDA>
Won't let me hit the links in above link to download.
Sent from my DROID Razr M
CamoCustom said:
Won't let me hit the links in above link to download.
I just checked them and they are working fine. Did you login to the site?
Sent from my DROID Razr M
Click to expand...
Click to collapse
Sent from my RAGED OUT RAZR MAXX HD
Nice job. Debloated version was working smoothly until my M decided to crap out today and now won't boot (it's not rom related). I was in a middle of a call and it just died, Thought it might of been a dead battery but even after charging for 7 hours it won't boot. Anyways I just wanted to say good job.:good:
BDAZZG1 said:
This is a stock, pre-rooted BASE ROM with init.d support baked in. It includes the latest boot.img and radio img. Nothing more, Nothing less. Great base to build from or run as is. Anyone can use this and do whatever they want with it. Please remember to give credit where credit is due!
Speaking of credits...Thanks Mhous33 for the base I made this from!!
Get it Here: Team Rage.net
Click to expand...
Click to collapse
I would like to try this - however, my lone drawback is that I would love to have the power menu mod (for the ability to reboot and reboot into recovery). Can it be unlocked via developer options (or is that a custom 4.2.2 feature)?
thanks!
BDAZZG1 said:
This is a stock, pre-rooted BASE ROM with init.d support baked in. It includes the latest boot.img and radio img. Nothing more, Nothing less. Great base to build from or run as is. Anyone can use this and do whatever they want with it. Please remember to give credit where credit is due!
Speaking of credits...Thanks Mhous33 for the base I made this from!!
Get it Here: Team Rage.net
Click to expand...
Click to collapse
Thanks!
So, anyone have a nav-bar remover for these
jco23 said:
I would like to try this - however, my lone drawback is that I would love to have the power menu mod (for the ability to reboot and reboot into recovery). Can it be unlocked via developer options (or is that a custom 4.2.2 feature)?
thanks!
Click to expand...
Click to collapse
I am currently building custom stock based Roms for M and HD. Extended power menu among other cool additions will be included in these. Stay tuned...I will be releasing these builds in a week or so
Sent from my DROID RAZR HD using Xparent BlueTapatalk 2
Got this installed last night! I couldn't stand my car dock locking my phone up, so I went back to (almost) stock with this. I like so far! I had a strange issue with a call today (dialed out, but couldn't hear anything, rebooted and worked fine), otherwise everything is working 100%.
BDAZZG1 said:
I am currently building custom stock based Roms for M and HD. Extended power menu among other cool additions will be included in these. Stay tuned...I will be releasing these builds in a week or so
Sent from my DROID RAZR HD using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Well then let me go ahead and request any way to remove the nav bar
Love that someone is still working off the stock kernels. I hate the bugs on the 4.2.2-4.3 build right now. No fault of the devs of course, darn Moto making this thing hard to develop kernel for....
Links arent active or something.... its not letting me download, its not even doing anything when I put my mouse over the link.
shiftr182 said:
Links arent active or something.... its not letting me download, its not even doing anything when I put my mouse over the link.
Click to expand...
Click to collapse
I found that you have to register with that site then you can download the files.
Sent from my Razr M using Tapatalk 4
This is by far the smoothest debloated rom I have used, and everything still works (hotspot, clock widget, etc).
Fantastic work.
arrrghhh's kernel works with this rom as well.
Coronado is dead said:
This is by far the smoothest debloated rom I have used, and everything still works (hotspot, clock widget, etc).
Fantastic work.
arrrghhh's kernel works with this rom as well.
Click to expand...
Click to collapse
What does using arrrghh's kernel do over the installed kernel?
perkinscl said:
What does using arrrghh's kernel do over the installed kernel?
Click to expand...
Click to collapse
Overclocking/underclocking, different govenors, that kind of stuff. I keep my phone at 1.7ghz and use the lulzactive govenor (set all that in SetCPU). Smooth as silk.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Coronado is dead said:
Overclocking/underclocking, different govenors, that kind of stuff. I keep my phone at 1.7ghz and use the lulzactive govenor (set all that in SetCPU). Smooth as silk.
Click to expand...
Click to collapse
does it improve data connection?
I've never had a problem with my data connection so I cannot speak to that.
Sent from my XT907 using xda app-developers app
Coronado is dead said:
I've never had a problem with my data connection so I cannot speak to that.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
oh, but I think you just did...
jco23 said:
oh, but I think you just did...
Click to expand...
Click to collapse
Lol, I guess so. but what I meant is that I have not had data/signal issues with any rom and this kernel is no different.
Coronado is dead said:
Lol, I guess so. but what I meant is that I have not had data/signal issues with any rom and this kernel is no different.
Click to expand...
Click to collapse
hows about the shakes? i still get them once in awhile - but certainly less frequently than on the previous baseband....
Still got the shakes.
Sent from my XT907 using xda app-developers app