I can't get it back to stock ROM - Samsung Galaxy Exhibit 4G

I have a Samsung Galaxy Exhibit II and I tried to get my phone back to stock ROM following this directions:
"1. Connect your device to your PC and copy uvlg3.flash2stock.zip to your internal SD.
2. Boot into ClockworkMod Recovery. To do this,
i. Power down your devi ce.
ii. Press and hold the Volume Up and Power buttons until you see the Samsung logo appear.
iii. Release both buttons.
iv. Press the left bottom Menu capacitive button when you see the Recovery logo (white box with the android icon).
3. On the next screen, select apply update from sdcard using the Volume Up and Down buttons to navigate and the Home button to select.
4. Highlight uvlg3.flash2stock.zip on the next screen and press the Home button to select it.
5. Go back to previous menu and select reboot system now to restart your device."
It all seemed to work fine but in step 4, when i applied the update from sd card it appears in yellow:
E: short write of /tmp/sideload/package.zip(no space left on device)
Installation aborted.
As you can figure, im desperated!! so please if someone could help!!!
THANKS

You missed the wiping part. Do a factory reset/wipe Rom ... I forget what it's called in CWM... Then flash the Rom
Sent from my SGH-T679 using xda app-developers app

it doesn't work
Mwas. said:
You missed the wiping part. Do a factory reset/wipe Rom ... I forget what it's called in CWM... Then flash the Rom
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
I did all that, the CWM doesnt appear now, im in the android system recovery <3e> and my options are the foollowing:
-reboot system now
-apply update from sd card(here is the stock rom but when i apply it it doesnt work because of "insuficent space"
-wipe data/factory reset(did that already)
-wipe cache partition(did that already)
-install fota(dont know what it is but i did it anyway).
Thanks for the reply

aditional info
when i reboot my phone and press down the volume i appear in odin mode, it gives me 2 choices: reboot or download mode, if i enter the download mode it appears:
ODIN HOME
PRODUCT NAME: SGH-T679
CUSTOM BINARY DOWNLOAD: NO
CURRENT KERNEL: UNKNOWN
(ANDROID ICON)
dOWNLOAdING...
Do not turn off target!

There is an alternative way to enter recovery, just pull your battery, hook up the usb cable (ummm phone to pc), press and hold the volume up button then drop in the battery. When you see recovery start let go of the volume button.
You can mount your computer through cwm or twrp recovery an move the stock rom from your pc to your external sd. Do full wipes before flashing (any ROM in my opinion)

Sounds like you need to put the .zip on ext_sd, then wipe your internal sd, or manually delete all of the files. Something is eating all of the space. You might want to put the custom recovery back on it, CWM or TWRP, then wipe it all and reflash the zip, then reboot.

Related

[Q] Can't 'install zip from sd card' Help!

Hi all,
I've got a Samsung Galaxy S I9000, but I don't have the stock Live Wallpapers.
Now I wanna install/do this:
"First place SamsungLWP.zip on the root of your SDcard (plug your phone into your computer and transfer the samsungLWP.zip to your phone's sdcard)
1. Go into rom manager and reboot into recovery
2. scroll down to install zip from sd card and press the power button
3. scroll down choose zip from SD card again hit power button
4. highlight signed SamsungLWPs.zip
5. Hit power button
6. Go back until you get to the reboot option I think back twice Reboot phone
7. go to personalize in setting options select htc wallpapers select live wallpapers and pick one to enjoy one"
I can't do the 2nd step, because there is no choice to select 'install zip from sd card'.
Can anybody help me?
I've got the stock rom (Froyo) and the phone is rooted.
Help would be appreciated
Koen
nobody?, I really need this now
did you fetch cwm?
The instructions assume you have CWM recovery (or a similar tool) on your phone.
In order to install programs in this manner you have to get CWM recovery. (search for rom manager in market and flash cwm (it's the first option from the top),
then again, I'm assuming you're getting this since you're still on 3e (the recovery most galaxy s phones come with). What I'd like you to do is get your phone into recovery mode and tell me what the very first line on the top says.
Hi,
The first line says: 'Android system recovery <3e>'
theres your problem you need recovery 2e
search for CWM in either update.zip or Flashable Odin version like cf-root.
if you get the update.zip version you need to put it on the root of your internal sd card, boot into recovery and select apply:update.zip you will need to do this twice... then CWM will appear and let you flash unsigned zip files.
if you use odin version just flash it in download mode and when you next boot you will have 2e recovery.
I just fixed it, I did put the 'data/app' folder onto my phone, and installed it, and it worked.
Thx everyone
There's your problem
You currently do not have the option to install (most) zip files from recovery. If you do want this option it is very possible and not too complicated(although this might void warranty) please read the forum guide on how to get CWM (clockworkmod)
I'm having a similar problem, but azzledazzle's suggestion left me a little baffled. I've got rom manager installed, Clockworkmod flashed and all that good stuff, but I'm still not able to install new roms. Now, I'm just about to try recovery mode, and...
Yes, 3e.
But how do I find a 2e thingie? Imagine I'm a gigantic moron who can put things in folders, but that's about it. I apologise for the pathetic help request, but if there's anyone...
Any help guys?thanks
Also having problems installing from sd
* edit*
Nvm
Listen..I have a HTC One V and when I go in recovery mode it says E:Can't open...Then when i press Vol Up + Power Button a list of commands pops up but there is nothing saying install zip from SD card..And now it's stuck at the htc one screen i can't start it up \_/
can it work for i9300 ?
koenster said:
Hi all,
I've got a Samsung Galaxy S I9000, but I don't have the stock Live Wallpapers.
Now I wanna install/do this:
"First place SamsungLWP.zip on the root of your SDcard (plug your phone into your computer and transfer the samsungLWP.zip to your phone's sdcard)
1. Go into rom manager and reboot into recovery
2. scroll down to install zip from sd card and press the power button
3. scroll down choose zip from SD card again hit power button
4. highlight signed SamsungLWPs.zip
5. Hit power button
6. Go back until you get to the reboot option I think back twice Reboot phone
7. go to personalize in setting options select htc wallpapers select live wallpapers and pick one to enjoy one"
I can't do the 2nd step, because there is no choice to select 'install zip from sd card'.
Can anybody help me?
I've got the stock rom (Froyo) and the phone is rooted.
Help would be appreciated
Koen
Click to expand...
Click to collapse
pls can you send the file to me [email protected]
Obviously you need to flash the latest custom recovery CWM. After that flashing zip will work.
Sent from my GT-I9001 using xda premium

[Guide] Full Tutorial To Install Custom ROM [GT-P6800]

thnxs to sk806,(go and thank him first)
First, you need to root your device. Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1.
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time.
After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON.
Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button.
You will again see some yellow writing and your device will be rooted.
After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1.
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here: http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1. THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20, below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB.
Then, copy "P6800_Recovery.tar" to your PC desktop.
Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe.
You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.). You want to click the button that says "PDA" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard". You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
***HIT THE THANKS BUTTON IF YOU FOUND THIS POST HELPFUL~***
Click to expand...
Click to collapse
Thanks for your work...
It would be nice if you could make the tutorial with picture and numerical steps.
Good tut love the afford. Some ppl could really use that.
(Edit) tnx goes to steve and you for posting
Verstuurd van mijn GT-P6800 met Tapatalk
Made it a little easier to read/follow for ya.
haidharbbc said:
thnxs to sk806,(go and thank him first)
OK, here you go:
First, you need to root your device.
Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time. After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON. Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button. You will again see some yellow writing and your device will be rooted. After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here:.http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1
THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20 (in italics), below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB. Then, copy "P6800_Recovery.tar" to your PC desktop. Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe. You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.).
You want to click the button that says "Recovery" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard".
You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
Click to expand...
Click to collapse
thnxs for updating it to easier to read for others
Sent from my GT-P6800 using xda premium
Hi!
The ODIN Mobile which I have use to install the Recover, then can I remove it because think about not use it any more???
thx, much appriciated, will try later
2 questions
a why is it necesarry to use clockword recovery ?
i flashed this stock tweaked rom in stock recovery without any problems
http://forum.xda-developers.com/showthread.php?t=1520888
b. is it possible to remove clockwork recovery in case of ...., go back to the old stock recovery of Samsung ?
Original Post
This is the tutorial as I wrote it...I suggest you edit the OP with this, or the version above. If you hit the "Quote" button below, you can copy the properly formatted text from the reply window (it will start with [QUOTE: blah blah], have "[*]" instead of numbers, and end with [QUOTE/]), and then copy and paste to your OP. Thanks.
Steve
First, you need to root your device. Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1.
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time.
After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON.
Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button.
You will again see some yellow writing and your device will be rooted.
After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1.
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here: http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1. THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20, below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB.
Then, copy "P6800_Recovery.tar" to your PC desktop.
Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe.
You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.). You want to click the button that says "Recovery" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard". You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
yes..you can remove it after u install it..but just save it for later purpose my opinion
Sent from my GT-P6800 using xda premium
yarda,
i can't really answer for your 1st question..maybe steve dan help you..
for the 2nd question, i think by flashing the stock firmware and factory reset will do the trick
Sent from my GT-P6800 using xda premium
flashed clockword with odin mobile, it's easy
just follow the steps
now i'm capable to make a nandroid backup before flashing some other stuff
ok..thnxs for the feedback
Sent from my GT-P6800 using xda premium
Yarda said:
thx, much appriciated, will try later
2 questions
a why is it necesarry to use clockword recovery ?
i flashed this stock tweaked rom in stock recovery without any problems
http://forum.xda-developers.com/showthread.php?t=1520888
b. is it possible to remove clockwork recovery in case of ...., go back to the old stock recovery of Samsung ?
Click to expand...
Click to collapse
first question:
Why you can flash this ROM with your stock recovery, i look inside the script steve made and found that
-script mounting and unmounting /data and /system partition
-deleting file system from /data and /system partition
-moving file from zip to /system and /data partition
-making busybox symlinks
-installing kernel
-set some permission
All above process is support with edify script from stock recovery...( until now, i dont know if samsung lock it someday) thats why you can install steve ROM...
suwandiapr said:
first question:
Why you can flash this ROM with your stock recovery, i look inside the script steve made and found that
-script mounting and unmounting /data and /system partition
-deleting file system from /data and /system partition
-moving file from zip to /system and /data partition
-making busybox symlinks
-installing kernel
-set some permission
All above process is support with edify script from stock recovery...( until now, i dont know if samsung lock it someday) thats why you can install steve ROM...
Click to expand...
Click to collapse
This is correct. The tutorial was for all custom ROMs to come, not just my tweaked stock one. The fact that you can flash my ROM is because it is nothing too exotic (it's stock...) and the bootloader and recovery on the tab is not locked down. These things may change, and it is better to have the CWM recovery for that reason AND, especially, as noted in the post above, you can make NANDROID backups which you really should do before you flash a custom ROM...
Steve
thx for the explanation !
i now use CWM recovery, flashed with Odin mobile
great tut, but my CHINA P6800 will not accept any other ROM install for some reason. Yes, I have a brain and others confirm it's somehow locked. No f-ing idea how; more research after (endless) travel.
sk806 said:
This is correct. The tutorial was for all custom ROMs to come, not just my tweaked stock one. The fact that you can flash my ROM is because it is nothing too exotic (it's stock...) and the bootloader and recovery on the tab is not locked down. These things may change, and it is better to have the CWM recovery for that reason AND, especially, as noted in the post above, you can make NANDROID backups which you really should do before you flash a custom ROM...
Steve
Click to expand...
Click to collapse
This should be included in the tutorial imo.
so in a nutshell, we're bootloader unlocked, I can get my brand new HK galaxy tab 7.7 and root/CWM right away (like my OG tab) without having to do any Bootloader unlock method?
cheers
yes..mine juz straightly rooted..same like most of the others
Sent from my GT-P6800 using xda premium
Thanks Guy

[Q] Phone is always booting in TWRP Mode

I'm new to this forum,
I tried to flash using signed-broodROM-JB-Release-1.zip.
I have followed these steps
Turn off your phone.
Reboot the phone into Recovery Mode by holding down the Volume Up and Power keys. When the Samsung logo appears, release both buttons. When “Android out of the Box” is displayed, tap the Menu button. DO NOT press the Home button during bootup, or else the phone will enter RAM Dump Mode.
On the recovery menu, select Apply update from SD card or Install ZIP from SD card.
Locate the twrp2.2.1-recovery.zip file and confirm that you want to install the file.
Reboot your phone afterwards.
Turn off the phone.
Reboot the phone into Recovery Mode as in step 2.
If you see the TWRP Recovery menu, then you’ve successfully flashed the new custom recovery over your phone’s stock recovery.
1.Copy the signed-broodROM-JB-Release-1.zip file and the Google Apps package to the internal SD card of your phone.
2.Turn off the phone.
3.Boot your phone into Recovery Mode. You can do this by pressing and holding down the Volume Up and Power buttons at the same time. You can then let go of the buttons once the Samsung logo on the screen appears. When the icon bearing an Android inside a box shows up, press the Menu button.
4.Select Wipe data/factory reset and confirm the action on the next screen.
5.Select Wipe and choose Cache. Confirm the action on the next screen.
6.Select Install ZIP from SD card. Select Choose ZIP from SD card and locate the signed-broodROM-JB-Release-1.zip file. Confirm the installation on the next screen.
Once the installation is complete, flash the Google Apps package in the same manner as in step 7.
Go back to the main menu and select Reboot system now to reboot your phone. It would take about 5-7 minutes to boot for the first time.
But NOW my phone is always starting with TWRP Mode...Help??
Is my phone bricked??
nissam333 said:
I'm new to this forum,
I tried to flash using signed-broodROM-JB-Release-1.zip.
I have followed these steps
Turn off your phone.
Reboot the phone into Recovery Mode by holding down the Volume Up and Power keys. When the Samsung logo appears, release both buttons. When “Android out of the Box” is displayed, tap the Menu button. DO NOT press the Home button during bootup, or else the phone will enter RAM Dump Mode.
On the recovery menu, select Apply update from SD card or Install ZIP from SD card.
Locate the twrp2.2.1-recovery.zip file and confirm that you want to install the file.
Reboot your phone afterwards.
Turn off the phone.
Reboot the phone into Recovery Mode as in step 2.
If you see the TWRP Recovery menu, then you’ve successfully flashed the new custom recovery over your phone’s stock recovery.
1.Copy the signed-broodROM-JB-Release-1.zip file and the Google Apps package to the internal SD card of your phone.
2.Turn off the phone.
3.Boot your phone into Recovery Mode. You can do this by pressing and holding down the Volume Up and Power buttons at the same time. You can then let go of the buttons once the Samsung logo on the screen appears. When the icon bearing an Android inside a box shows up, press the Menu button.
4.Select Wipe data/factory reset and confirm the action on the next screen.
5.Select Wipe and choose Cache. Confirm the action on the next screen.
6.Select Install ZIP from SD card. Select Choose ZIP from SD card and locate the signed-broodROM-JB-Release-1.zip file. Confirm the installation on the next screen.
Once the installation is complete, flash the Google Apps package in the same manner as in step 7.
Go back to the main menu and select Reboot system now to reboot your phone. It would take about 5-7 minutes to boot for the first time.
But NOW my phone is always starting with TWRP Mode...Help??
Is my phone bricked??
Click to expand...
Click to collapse
Flash this version of TWRP, should help http://www.mediafire.com/?0ufe8dcv5kkajay [Installtion Guide: http://forum.xda-developers.com/showthread.php?t=1694617]

only start screen

after flashing - i need to wipe - afgter this i get only the screen - "Samsung Galaxy SIII mini ,,, " and nothing else
i repeated flashin serveral times
Hi, a bit more info might help here, but anyway, if you are changing roms you need to factory reset & wipe dalvik & cache after flash generally, read op for rom, if u are trying something else, explain more pls
Sent from my GT-I8190 using XDA Free mobile app
ok - i flashed the phone with CM12 (with odin) .
Flashing all ok. Then i go to twrp and wipe Dalviak and Cache.
After system boot only the " Samsung Screeen ..." appears.
After that i try a new flash with CM 11 but allways the same .. " Samsung Galaxy ...) . .. nohing else
are you sure you are not wiping system or data?
i thing i wiped both
Only wipe dalvik & cache after flash, not system and data
Sent from my GT-I8190 using XDA Free mobile app
i do the descriptions on nova fusion with odin3 (cm12)::
...
6) Turn off your phone, and then use VOL- & HOME & POWER buttons combination.
7) If you see Warning screen, use VOL+ button.
8) You should see Android and some information.
9) Connect phone to computer and make sure it is detected by Odin (it will appear as COM device). If it doesn’t, try to use other USB port.
10) Use Start button. Wait until flash process will finish.
11) Your phone will restart, but probably won’t boot. Pull down your battery and use VOL+ & HOME & POWER buttons combo to boot into recovery.
-> all ok -> twrp 2.7.1.0
12) Click on Wipe, then use slider on the bottom to let process begin.
-> here iam not realy sure - i do dalviak and cache wipe
-> i get an error - E:Unable to mount "/system"
13) Click on Home icon, and then Reboot -> System.
Wait for boot. Now you should have ROM installed and ready to use!
-> nothing happens -i have onlythe start screen" Samsung ...."
I always flash roms from zip file with twrp & don't usually have any problems, maybe you should try that method instead
Sent from my GT-I8190 using XDA Free mobile app
Yes you are right , but dont have a chance to put the files on the phone,
because i have only two modus:
1) Modus twrp - how you can put file on the phone ?
2) and the downloading modus - and there i know only odin software
How you then put files on the device ?
Put the file on ext sd card, boot into twrp recovery, factory reset, then select install, install from ext sd, select zip file, wait till installed, then wipe dalvik & cache, reboot system, do full nandroid backup, first just incase so you can go back to previous rom & settings
Sent from my GT-I8190 using XDA Free mobile app
yes i know - but when you say ..Put the file on ext sd card ...
how schould i do this ?
there is no adb, there is no system - only twrp modus or starting screen...
connect the phone to pc & open sd card or put sd card in a card reader & transfer then boot into twrp recovery& do wipes & installation as explained
Did you have any luck with this problem yet?
Sent from my GT-I8190 using XDA Free mobile app

Galaxy Note 1 stuck in "logo_q1.jpg draw failed"

So I wanted to update my android to lolipop (5.1) and followed the instruction below :--
-Connect your Galaxy Note to your PC using USB cable and copy the downloaded files to the SD card of your Galaxy device.
-Disconnect your Samsung Note N7000 and power it off.
-Now boot it in to the CMW recovery mode: press and hold Volume Up, Home and the Power buttons simultaneously. Use Volume keys to highlight and Power button to select.
-Nandroid backup: select Backup and Restore option to perform the Nandroid backup of your current OS.
-Data wipe operations: go to wipe data/factory reset and confirm the operation. Also wipe cache partition and finally go for wipe dalvik cache to clean it up too.
-Now, select install zip from sdcard and then choose zip from Sdcard. Locate the NightOwl Android 5.1 Lollipop file and confirm its installation.
-When the ROM installation completes successfully, repeat the above step for installing the GApps package.
-Once done, go back to main recovery menu and select reboot system now.
-Wait until your device boots in to the very new Android!
But when i tried to install it, it says installation failed and my battery case was opened and my battery dropped. When i restart my phone it says, logo_q1.jpg draw failed. Is there anyway to fix this? I even tried to boot it in CWM mode but it didn't work, "logo_q1.jpg draw failed" is still there

Categories

Resources