In need of help again, very sorry.
using froyo 2.2 on an ATT vers Nexus One.
Problem:
So with using the default browser (mozilla?), as well as Dolphin HD browser...there are a few important sites I cannot load (no matter what) via 3g or 2G data.
It tries to load at first but just quickly stops leaving me at a blank page.
However, if i switch to my wi-fi network, these same problem pages will load without issue. Not a problem.
But switch back to mobile data 2G or 3G...these sites will not load.
All other websites I visit (so far) load fine either wifi or 3g/2g, it's just some specific ones. This is a constant and consistent problem with specific websites.
The sites are
- hotmail
- ebay mobile
* but I'm sure I'd find others.
So it's strange...perhaps this is best asked in the dev section?
I have no idea what to search on this problem (here or google).
It's as if something is out of whack at the browser end, like it's reading some form data that I could fix/edit/delete and resolve this problem. Or perhaps it's some security bug/issue...
Either way, I need to get this fixed so I can check hotmail if I need to while on the road, ....problem is I don't know where or what to do here for a fix. Any suggestions?
Certain config file, or the like I can edit or del for a fix?
I've DEL the cache, form data, cookies, etc...everything. No fix.
Can the default browser on the nexus one be uninstalled/reinstalled?
I know I can uninstall/reinstall Dolphin HD, I'll try that.
I also like the default browser though...any way this can be fixed?
man, this problem is getting worse...and it's happening in other browsers too.
dolphin and opera.
it's as if there's a glitch that occurs if you once viewed a site via wifi...then when using 3G it has hang ups (blank load screen).
Is there anyone who might have an answer here?
Can the built in browser be reinstalled (froyo 2.2) to try and fix?
Works fine for me.
?
I'm sure it does, and that's great. Most pages load fine too here...but...
As mentioned it seems to be more of an odd or rare "glitch" here...like something that goes awry under special circumstances (won't load a certain page under 3g/2g data - but will load same page using my wifi).
Now it's happening with facebook in default browser and dolphin. Seems to be happening due to usage at home (wifi)...then accessing same via 3G/2G (not at home). Some hiccup...causing a no load scenario with cell data (no problems via wifi though).
Can we please only reply if this is something you also encountered or may know what's going on here?
I'm no expert but the sites you described seem to be https sites, a secured version of normal webpages. And you're trying to acces those sites through an unsecured data connection 3G/2G.
So I don't know exactly what https does but I assume it won't allow you to send/receive your data over an unencrypted network.
But as for your hotmail problem, you can configure your stock e-mail app to receive your hotmails.
This definitely is the wrong section to post this, you might get a lot of flack for posting here!
Try installing a new rom, your issues are not normal. Try Enom's newest -- it has a stable kernel, and offers perhaps an updated apn file. Short of that, you need to call your cellphone provider, and find out the apn settings from them (double check), and/or why they are restricting access...
I understand your frustration with not getting a response in the Q&A section, but the dev section is for devs and testers. Maybe look at what distribution of froyo you are running (cyanogen? enom? kang-o-rama? leo?) and post in their respective threads. and if this is just a stock updated froyo, you definitely need to call your cellphone provider.
Good luck!
Also, note the rules: http://forum.xda-developers.com/showthread.php?t=614062
verify your APN settings. Same thing happened to me & proper APN settings fixed it.
Not sure the proper ones for AT&T, however.
edit: make sure to clear anything that ought to be cleared -- an asterisk isn't the same as cleared
Delete your Proxy IP and Port under APN settings and try to reload the page.
As mentioned above, 1) this is wrong section, 2) if you're on a custom ROM - try another ROM, and if you're on stock FRF91 or any custom ROM does the same - then it's definitely a problem with your cellular provider and/or your APN settings.
It may pay to check that it's not your carrier.
Can you access those sites with your SIM in another phone?
Merged threads ... please do not create duplicate threads as it clutters up the forum and invites flamming/trolling responses.
Regards,
First of all, while this is my first post, I have been a silent browser of xda for some time. This is such a wonderfull site.
My question is, is it possible to somehow get the settings for sideloading and usb/wifi teathering to show up in the settings menus? I assume that these have been removed or hidden somewhere in the source by commenting out or just been deleted. It seems to me that since these functions were built in to other android devices and I assume the I9000, that it sould be possable to reverse there removal. The settings.db has so many referances to other settings that are easily changed that it sould not require root access correct?
Now I must say that I am in no way a developer, and am not very good with linux. These are just some thoughts and conclutions that I have come up with while reading and pondering over countless articals on xda
Finaly , I want to say that I strongly disagree with Att's position on removing these items to increase there bottem line, and I would be with T-Mobile if they had good coverage in my house.
Usb tether is listed - called Pc internet. Sidwloading can be achieved by rooting and changing a settings.db file but no one has a fix for making it show up.
Sent from my SAMSUNG-SGH-I897 using XDA App
I am aware of the option to enable sideloading in the settings.db, all im saying is that there must be a way to but the option back in the settings menus. As for the USB teathering, isnt there an option on other devices to enable disable?
perhaps this thread would be better if it was moved to development?
djpittsford said:
I am aware of the option to enable sideloading in the settings.db, all im saying is that there must be a way to but the option back in the settings menus. As for the USB teathering, isnt there an option on other devices to enable disable?
perhaps this thread would be better if it was moved to development?
Click to expand...
Click to collapse
a) the sideloading thing is ATT and that will never show up in one of their phones (unless they somehow miss it) if you really want it THAT badly, you can flash eugene's vibrant hybrid and it's there
b) USB tether is directly available through the settings menu on stock firmware (looks like ATT missed it, because they had it removed in JH2 and JH3)
c) if you mean the WIRELESS (mobile access point) tethering, that was removed by ATT and we've already found workarounds to have it back.
d) this certainly does not belong in development, thanks for keeping it out of that forum
e) look at SRE, it contains basically all the things you're asking for
OK, this took a lot of trial and error, some bravery on my part, and SEVERAL calls to AT&T, but I finally got it working!* I am not a Dev anywhere CLOSE to the likes of DG, but I do have extensive knowledge of hacking mobile devices in general, GSM networks, CS/PS infrastructure, and industry experience from the NOC side of several MSOs (aka ISPs), so I tackled this problem from a "what would I implement if I were AT&T and wanted to force a tethering package on subscribers?" Point of view, and worked backwards from there.
Many have tried the solution already posted, and I give credit to the poster of that original "fix" while respectfully pointing out that using this "fix" accomplished AT&T deleting my data package twice, and provisioning a tethering plan automatically once, all automatically done by the system. This was not the solution I was looking for.
So, without further introductions/banter on my part, here is the step-by-step... I will try to keep explanations to a minimum for now, if they are asked for I will put them in post #2.
*Prerequisites: ROOT
*Tools required: Root Explorer, SQLite Editor (both available in market, yes they are paid apps but they are WORTH EVERY PENNY!)
----note: this can also be accomplished using adb and a sqlite database editor on your pc, but requires many, many more steps, and won't work after reboot unless you have a working busybox and can successfully chown/chmod the .db file after you copy it back to the device, and even then I still had trouble with it after reboot, so... I had success with these paid apps, so I'm writing the tutorial assuming you have them. If there is enough demand I'll write an alternate tutorial on how to do this using free tools.
*******
++++++++++++ Edited, now shorter! Thanks to all for testing these settings, the new steps are confirmed working!
*(if you used the steps prior to my editing them, you're good, your settings will work fine, the changes reflect a different, shorter way to do this)
1) Create a NEW access point setting using the following settings: (SETTINGS>WIRELESS AND NETWORKS>MOBILE NETWORKS>ACCESS POINT NAMES> {press menu} NEW APN
Name: whatever you like here, I use att
APN: wap.cingular
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type:
APN Type: default,agps,fota,supl,fota,tether,mms
(all settings I left blank, leave blank, make sure you press menu, save to save)</br>
2) Enable Airplane Mode
(hold power button for three seconds, select Airplane Mode)
3) Open Root Explorer
4) Navigate to: /data/data/com.android.providers.telephony/databases/
5) Click on "telephony.db"** (this should open the db using SQLite Editor)
6) Select "carriers"
7) You should see a long list of APN settings for various carriers, the ones you are interested in are rows 4, 6, and 7. Scroll ALL THE WAY TO THE RIGHT and the last column should be labeled "preloaded." You will notice that each is labeled "true" press and hold the word "true" in row 4 and select "Edit Field" from the pop up menu. Change the "true" to "false" and click "Save". Repeat this step for rows 6 and 7.
7b) Edit the type field of row 6. Right now the field says "tether". Change it so that it says "default,agps,fota,supl,fota,tether"
7c) Change the APN field in row 6 from BROADBAND to wap.cingular
8) Press back twice to close the SQLite editor and you should be back in Root Explorer. Close Root Explorer.
9) Disable Airplane Mode
10) Go back to the list of APNs you saw in step 1. You should see that the "locked padlock" is now unlocked on the preloaded APNs named AT&T US, AT&T US HSDPA, and AT&T TETHER. You now need to edit the one labeled AT&T TETHER. Change the following settings:
APN: wap.cingular
Proxy:
Proxy port:
APN type:
Press menu, save.
11) Select the radio button for the APN you created in step one. AT&T Tether.
12) Reboot phone.
13) Enjoy! Mobile Hotspot should now work first time no issues!
Note: (Due to some pre-existing (bug?) in the software, you do need to have wifi turned on BEFORE you enable Mobile Hotspot for it to set up properly. If you forget it will hang until you enable wifi.)
#########################
After staying up all night to figure this out, I have confirmed that using the Webtop without dock MOD combined with mine you CAN use webtop with your 3G/H+ connection!!! No wifi required!
Steps to make this work:
1) Connect Webtop
2) Using the window that allows you to control the regular phone interface, navigate to the ACCESS POINT NAMES menu described in step 1 above.
3) Select the radio button next to "AT&T Tethering"
Done! Open firefox and enjoy!
Credits to Fenny, author of the MOD to enable Webtop without dock!
Also designgears, author of Adeo, which is necessary to run aforesaid MOD!
And to t0dbld, who contributed significantly and led the discussion that resulted in said MOD.
##########################
Sent from my MB860 using XDA App (yes, posted entirely from my phone. Thank you swype!)
If this helped you great! I'm glad I could help! I am not asking for donations! If you still feel like this saved you enough money to buy me a beer, my paypal email's in my profile.
Reserved for OP
Sent from my MB860 using XDA App
Thanks for the tutorial. Does this allow the laptop dock and media dock to work without using wifi?
airbillion said:
Thanks for the tutorial. Does this allow the laptop dock and media dock to work without using wifi?
Click to expand...
Click to collapse
It should, though I personally own neither, and therefore have not tested that particular functionality. There is no way that I am aware of that AT&T SHOULD be able to tell any difference between traffic from tethered devices and traffic from the device itself, so unless they are packet sniffing (illegal for ISPs, somewhat hazy regulation on wireless service providers, but would be a BIG shock to me if they were) or there is something in the actual webtop ubuntu software that would inform AT&T that webtop is being used somehow (also HIGHLY unlikely, as it would be a HUGE invasion of privacy) the answer is YES!
PLEASE if you have access to either of these $$$$$ expensive docks if you wouldn't mind test this for me and report back to confirm that indeed it does allow use without wifi.
Sent from my MB860 using XDA App
richhed said:
It should, though I personally own neither, and therefore have not tested that particular functionality. There is no way that I am aware of that AT&T SHOULD be able to tell any difference between traffic from tethered devices and traffic from the device itself, so unless they are packet sniffing (illegal for ISPs, somewhat hazy regulation on wireless service providers, but would be a BIG shock to me if they were) or there is something in the actual webtop ubuntu software that would inform AT&T that webtop is being used somehow (also HIGHLY unlikely, as it would be a HUGE invasion of privacy) the answer is YES!
PLEASE if you have access to either of these $$$$$ expensive docks if you wouldn't mind test this for me and report back to confirm that indeed it does allow use without wifi.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Cool thanks for the info. I have the hd dock and will give it a shot and post the results . I hope it works!
@airbillion
Thanks for your help!
Sent from my MB860 using XDA App
ah crap, i accidentally deleted the ATT Tether profile, can you give me the settings please?
Thanks!
or even better, attach the original sq file?
I hate that you are probably on final steps, but... You cannot re-create the AT&T Tethering profile manually, as this will break the functionality of the script that Mobile hotspot uses to "Verify" that you have a tethering plan...
Please go to your APN list, and press MENU>Restore Default Settings
Then (sorry) start over from step 1
richhed said:
I hate that you are probably on final steps, but... You cannot re-create the AT&T Tethering profile manually, as this will break the functionality of the script that Mobile hotspot uses to "Verify" that you have a tethering plan...
Please go to your APN list, and press MENU>Restore Default Settings
Then (sorry) start over from step 1
Click to expand...
Click to collapse
ahh didnt see that, thanks!
I can confirm that this works great - you no longer get stuck at "setting up data link" (so no more changing APNs to fix that).
Although, I tried the newly found webtop hack which allows you to just connect the HDMI cable to a TV and run webtop - it does not work without wifi. If you try turning off wifi and use 3g, it says "communicating with ATT to see if webtop something something" and nothing loads.
http://forum.xda-developers.com/showthread.php?t=980193
andy2na said:
I can confirm that this works great - you no longer get stuck at "setting up data link" (so no more changing APNs to fix that).
Although, I tried the newly found webtop hack which allows you to just connect the HDMI cable to a TV and run webtop - it does not work without wifi. If you try turning off wifi and use 3g, it says "communicating with ATT to see if webtop something something" and nothing loads.
http://forum.xda-developers.com/showthread.php?t=980193
Click to expand...
Click to collapse
Good work richhed!
Wifi hotspot works, but it does not seem to work with the hd dock over 3g only with wifi. There must be another check somewhere along the way. Too bad, hopefully we canfigure it out soon though.
I'm using the Atrix in Australia on the 3/Vodafone network, is there a way I can get it to work?
richhed said:
OK, this took a lot of trial and error, some bravery on my part, and SEVERAL calls to AT&T, but I finally got it working!* I am not a Dev anywhere CLOSE to the likes of DG, but I do have extensive knowledge of hacking mobile devices in general, GSM networks, CS/PS infrastructure, and industry experience from the NOC side of several MSOs (aka ISPs), so I tackled this problem from a "what would I implement if I were AT&T and wanted to force a tethering package on subscribers?" Point of view, and worked backwards from there.
Many have tried the solution already posted, and I give credit to the poster of that original "fix" while respectfully pointing out that using this "fix" accomplished AT&T deleting my data package twice, and provisioning a tethering plan automatically once, all automatically done by the system. This was not the solution I was looking for.
So, without further introductions/banter on my part, here is the step-by-step... I will try to keep explanations to a minimum for now, if they are asked for I will put them in post #2.
Click to expand...
Click to collapse
great find on unlocking there crap !! btw if you delete the apn type or the apn all together for the tethering etc you wont have to do the wifi on off thing, you have to do that because sometimes its still defaulting to the apn that is strictly tethering
airbillion said:
Good work richhed!
Wifi hotspot works, but it does not seem to work with the hd dock over 3g only with wifi. There must be another check somewhere along the way. Too bad, hopefully we canfigure it out soon though.
Click to expand...
Click to collapse
Yes it does , i would check your settings again , jsut because the blue tethering active comes up does not mean it is tethering an active connection, recheck your settings and try again, working fine here
t0dbld said:
Yes it does , i would check your settings again , jsut because the blue tethering active comes up does not mean it is tethering an active connection, recheck your settings and try again, working fine here
Click to expand...
Click to collapse
Have you tried it on the laptop dock or the hd dock?
The wifi hotspot works for my ipad.
I'll check again, but for me when I start up firefox on the hd dock it hangs on: checking att for plan....
Edit:
Just tried it again on my hd dock after a reboot and it now works! Thanks
richhed said:
If there is enough demand I'll write an alternate tutorial on how to do this using free tools.
Click to expand...
Click to collapse
I for one would be interested in a tutorial with the alternative method!
Nice job! This hack is based on the same principle as the TBH NVRAM tether hack that we released for Droid devices except yours is done by changing the APN in the system and ours is done by changing the Tethered NAI(Network Access Identifier) strings in the NVM because that is where the carrier data authentication components are actually stored in CDMA phones. With GSM all of that is stored in the SIM card itself and is not accessible in the NVM.
The change does functionally the same thing, that being making all data use appear to the network as internal data rather than flagged as an externally tethered device.
Congratulations!
uhm I tried this, when i launch with internal viewer, i cannot edit. but when i try to launch with the db editor, it wont open cuz it says no network connect (since we turned on airplane mode)
EDIT: nvm I needed to download the editor from the market since I didnt have one installed.
Can we delete all of the other APN settings without ill-effect?
ikenley said:
I'm using the Atrix in Australia on the 3/Vodafone network, is there a way I can get it to work?
Click to expand...
Click to collapse
ikenley,
I am less familiar with your network, and I'll also need more information:
1) Are you using a US, AT&T branded Atrix?
2) What are the DEFAULT, working APN(s) for 3/Vodafone "smartphone" data plans?
3) Do these APN(s) require login credentials, and
4) Do they proxy their smartphone data plan
Unfortunately, if the answer to #4 is yes, then the answer is no, it (probably) won't work. Also, if they require a login, it depends on the type.
Sent from my MB860 using XDA App
fl13dl1c3 said:
I for one would be interested in a tutorial with the alternative method!
Click to expand...
Click to collapse
LOL, I was hoping that you wouldn't say that
Every time I personally tried I couldn't get it to stick on reboot, I think I may have been doing something wrong with the chown or something. Give me a few days I'll keep at it ;-)
BTW, if you have a basic knowledge of adb, and bash or busybox or any linux based command line terminal, basically you follow all steps the same except when you are editing the .db you'll need to copy that file to the sdcard, then to your pc, then edit it, then copy it back to sdcard, then back to /data/data/com.android.provider.telephony/databases/ and THEN you have to use adb shell to chown/chmod the file to the proper settings. I think it may be that the group ownership is changed to sdcard when you move the file... Anyway I'll work on it.
Sent from my MB860 using XDA App
Just recently pulled my old DS7 out of the corner and after seeing, nvflashed this really great Unofficial CM10.1 for Dell Streak 7 ROM on it. Works great, apart from the one tiny problem - it thinks it's a phone ... I already used Uninstall Master to remove some Phone features, such as: SIM Toolkit(it's called Mobile Data i think?), Messaging and Mobile Network Configurator. Was wondering how or where can I change or modify the settings related to how the Cyanogenmod acts as a Phone or a Tablet so that many apps from Play Store wouldn't default to the portrait mode.
On a sidenote - thanks to giveen and anyone involved in making this really awesome CM port to DS7 :good:
karlis1989 said:
Just recently pulled my old DS7 out of the corner and after seeing, nvflashed this really great Unofficial CM10.1 for Dell Streak 7 ROM on it. Works great, apart from the one tiny problem - it thinks it's a phone ... I already used Uninstall Master to remove some Phone features, such as: SIM Toolkit(it's called Mobile Data i think?), Messaging and Mobile Network Configurator. Was wondering how or where can I change or modify the settings related to how the Cyanogenmod acts as a Phone or a Tablet so that many apps from Play Store wouldn't default to the portrait mode.
On a sidenote - thanks to giveen and anyone involved in making this really awesome CM port to DS7 :good:
Click to expand...
Click to collapse
The reason why it is that way is because there are 4G models of the DS7
giveen said:
The reason why it is that way is because there are 4G models of the DS7
Click to expand...
Click to collapse
Understandable, but since I have a Wi-Fi only version I wanted to know if It's possible to change this in form of a setting or a few lines inside a configuration file without involving compiling. I even faintly remember stumbling upon something like this on a CM9 version I had on my old Xperia MT15i Neo ... if only I could remember or find where or how (currently strolling through the developer and CM10 related menus) - deleted my Xperia related bookmarks when I sold it.
p.s. - people mentioned some problems with the on-screen keyboard disappearing as described in one of the posts on the main CM10.1 thread, I've noticed them myself too and they tend to be application specific ... it feels like the keyboard crashes or force-closes due to not enough memory, like in lighter applications the keyboard works fine, but when trying to use the keyboard for writing for example a post in the comments section in a website will most likely result in keyboard disappearing after first input character.
So I am still trying to figure out why you started a new thread about this and what your question is.
To remove mobile data completely requires a new compile, something that cannot be done right now for a variety of reasons.
I guess I simply went too far off topic while trying to explain why I'm writing here... sorry.
So, to clear things up, the question still remains the same - what can I do to make it act more like a tablet and less like a phone on my Wi-Fi only DS7. So what I'm trying to find in the developer and CM menus is if I can more or less simply switch between some sort of "phone" and "tablet" mode so that some applications from Play store wouldn't default to portrait view mode.
And I noted that I've already uninstalled/disabled (call it how you want - I can restore them from the Unnstallers Recycle Bin if something weird starts to occur) some of the system .apks and as You already pointed out:
To remove mobile data completely requires a new compile, something that cannot be done right now for a variety of reasons.
Click to expand...
Click to collapse
... so thanks for clarifying that and no need to do any special versions - it's just fine how it is now. I didn't come here to request anything to be compiled or modified for me but just to ask for info, heck, I wasn't even expecting You to be answering on this thread.
karlis1989 said:
I guess I simply went too far off topic while trying to explain why I'm writing here... sorry.
So, to clear things up, the question still remains the same - what can I do to make it act more like a tablet and less like a phone on my Wi-Fi only DS7. So what I'm trying to find in the developer and CM menus is if I can more or less simply switch between some sort of "phone" and "tablet" mode so that some applications from Play store wouldn't default to portrait view mode.
And I noted that I've already uninstalled/disabled (call it how you want - I can restore them from the Unnstallers Recycle Bin if something weird starts to occur) some of the system .apks and as You already pointed out: ... so thanks for clarifying that and no need to do any special versions - it's just fine how it is now. I didn't come here to request anything to be compiled or modified for me but just to ask for info, heck, I wasn't even expecting You to be answering on this thread.
Click to expand...
Click to collapse
I make it my special concern to answer questions, even if it with sarcasm
I'm not sure what more you can do besides deleting the phone. Comment out in build.prop the rild stuff
I wonder if he is referring to TabUI? Which I as well am trying to relocate the flash able .zip which enabled this display difference. I have been running cm10.1 2/12 because of the sensors not working on the 2/14 build.
Sorry to piggyback the thread, but is there an answer for where the tab ui .zip is for the 2/12 build?
Sent from my Galaxy Nexus using xda premium
I've seen a few different solutions to the spotty MMS issues on custom 4.2.2 ROMs floating around so I thought I would create a thread to catalog them here. For those wondering there is an issue with seemingly all the D4 4.2.2 custom ROMs that causes MMS to randomly stop working. It seems rebooting or wiping cache/dalvik seems to fix it for some but it eventually comes back. I don't send many MMS messages so I can't really attest to how well any of these work.
Solution #1:
1. You will need a root file explorer like Root Explorer.
2. Navigate to /data/data/com.android.providers.telephony/databases/telephony.db
3. Rename telephony.db to telephony.db.xx
4. Reboot your phone and all should be well.
(Thanks to NeoPheonixTE on DroidForums for this one)
Solution #2:
Use the Verizon Messages app from the Play Store.
(Thanks to ws6formula350 on DroidForums for this one)
Solution #3:
Go to Settings, Wireless & Networks, More..., Mobile Networks, Access Point Names. Scroll down until you find whichever APN that your phone is using - in my case, my phone uses "LTE - Verizon Internet". Tap on the selection - NOT the blue bubble on the right - and scroll down until you find "MMSC". Tap on that, and in the box that comes up, type "http://mms.vtext.com/servlets/mms", without the quotes. Submit, press the Menu key, tap "save", back out to the Home screen, and reset.
(Thanks to Jishkah on DroidForums for this one)
If others have suggested these solutions elsewhere let me know and I will give them credit as well.
Good luck and let us all know if any of these solutions work for you!
Hey. Made an account to say this: I'm not sure if Solution #3 works. More than anything, I've found that MMS in custom ROMs are a hit-or-miss; every once in a while, they'll send, but, a vast majority of time, they won't. I found that bit of advice - changing the MMSC setting - on another website, and it seemed to work for me. However, the Droid 4 jumps between EHRPD - Verizon Internet, and LTE - Verizon Internet, so I'd recommend applying this setting to both of those networks.
Once again, I'm not sure if that'll work for sure, but it's worth a shot, no? Another idea that I had would be to copy the APN settings from the stock ROM to whatever custom ROM that you're using - I haven't tested this out, but it may work. It may also bar you from using Wireless Tether, too. Once again, I'm not an expert.