After trying searching today countless apps and signal booster apps i finally found one that worked. I tried Viaero Toggle app from the play store and now have a constant 4g signal. I have tested 2 methods on the app. Tried a method setting my preferred network to just LTE and CDMA/LTE. Setting it to just LTE works except you have an X over your signal bars, CDMA/LTE doesnt.
1. Download the Viaero toggle app
2. Select phone information
3. Scroll down where it says preferred network
4. Select LTE or LTE/CDMA
This is for people who KNOW their supposed to have an LTE connection. I used to own a GS3 and had a constant LTE signal. Switching to the ONE my LTE constantly jumps from LTE to 3G which was my biggest gripe. Now I'm in love with my ONE all over again. So if you know you have this issue. This will help trust me.
Let me know your results. I really want to work for everyone because this has been pissing me off for the longest. I had even switched out for a second HTC one and they both had signal issues. If it doesnt help let me know and we can try other methods for different people.
The 2 pics i attached is one with just LTE and the other is LTE/CDMA
You know that X over the signal bars mean you no longer have a voice connection right? Kind of defeats the purpose of a phone
Sent from my HTCONE using xda premium
Jahspree said:
After trying searching today countless apps and signal booster apps i finally found one that worked. I tried Viaero Toggle app from the play store and now have a constant 4g signal. I have tested 2 methods on the app. Tried a method setting my preferred network to just LTE and CDMA/LTE. Setting it to just LTE works except you have an X over your signal bars, CDMA/LTE doesnt.
1. Download the Viaero toggle app
2. Select phone information
3. Scroll down where it says preferred network
4. Select LTE or LTE/CDMA
This is for people who KNOW their supposed to have an LTE connection. I used to own a GS3 and had a constant LTE signal. Switching to the ONE my LTE constantly jumps from LTE to 3G which was my biggest gripe. Now I'm in love with my ONE all over again. So if you know you have this issue. This will help trust me.
Let me know your results. I really want to work for everyone because this has been pissing me off for the longest. I had even switched out for a second HTC one and they both had signal issues. If it doesnt help let me know and we can try other methods for different people.
The 2 pics i attached is one with just LTE and the other is LTE/CDMA
Click to expand...
Click to collapse
The better way of doing this would be to use the ##DATA# shortcut (provided you have your MSL), but you certainly can do this.
BrianBaker said:
You know that X over the signal bars mean you no longer have a voice connection right? Kind of defeats the purpose of a phone
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
Not if you only use VOiP, but I don't disagree.
BrianBaker said:
You know that X over the signal bars mean you no longer have a voice connection right? Kind of defeats the purpose of a phone
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
If you just want to use WiFi tether purposes. You can. That's also why I gave the cdma/ltd option as well.
Rirere said:
The better way of doing this would be to use the ##DATA# shortcut (provided you have your MSL), but you certainly can do this.
Click to expand...
Click to collapse
Shortcut is *#*#4636#*#* NO need MSL
Pacemaker2 said:
Shortcut is *#*#4636#*#* NO need MSL
Click to expand...
Click to collapse
Thanks for the shortcut since I keep forgetting it. I just gave it a try. I was able to switch to CDMA LTE only and my LTE switched back on from 3G almost instantly. Sweet! Looks like I'll be using this feature quite often. :thumbup:
Sent from my HTC ONE using xda app-developers app
I got nothin'
Neither the App nor the menu has provided 4G / LTE. Funny thing is that on 4.3 ROM's I don't get LTE, but 4.2 and lower it's a non-issue. Any ideas?
Funny thing is I have no APN's. When I try to manually add them they don't save.
sslbaron said:
Thanks for the shortcut since I keep forgetting it. I just gave it a try. I was able to switch to CDMA LTE only and my LTE switched back on from 3G almost instantly. Sweet! Looks like I'll be using this feature quite often. :thumbup:
Sent from my HTC ONE using xda app-developers app
Click to expand...
Click to collapse
Lol I never memorised the numbers the way I memorised it was *#*#info#*#*
Sent from my One using xda premium
I normally set it to WCDMA only but after a while it automatically switches to WCDMA preferred which results in a loss of data and the Roaming symbol. Any way i can set it permanently to WCDMA only? I'm in India btw...
indy1811 said:
I normally set it to WCDMA only but after a while it automatically switches to WCDMA preferred which results in a loss of data and the Roaming symbol. Any way i can set it permanently to WCDMA only? I'm in India btw...
Click to expand...
Click to collapse
Dial *#*#4636#*#*
Scroll down and select preferred network type to be WCDMA Only
BrianBaker said:
You know that X over the signal bars mean you no longer have a voice connection right? Kind of defeats the purpose of a phone
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
Who uses their phone for talking? What is this 2005?
Yup, i set it to WCDMA only but for some weird reason it switches back to WCDMA preferred after a while. I do it using the same method you've described.
If I set my phone to lte cdma it goes to gsm as my days connection. Am I missing something here? Thanks
Sent from my HTCONE using Xparent Blue Tapatalk 2
raptoro07 said:
Who uses their phone for talking? What is this 2005?
Click to expand...
Click to collapse
Come in to say hello from 2005
htc n8 sprint cant change WCDMA preferred
hello friends, please i need your help.
I have a HTC M8, unlocked for gsm, with viper rom, s-off, super cid, replacing HTComand file ....
The problem is that I can not set as preferred gsm / wcdma / lte auto signal.
over and over again to be WCDMA preferred.
I press * # * # 4636 # * # * and change this, but do not leave it as fixed.
voice network works, but the calls are cut
I hope your help from chile
miltoneski said:
hello friends, please i need your help.
I have a HTC M8, unlocked for gsm, with viper rom, s-off, super cid, replacing HTComand file ....
The problem is that I can not set as preferred gsm / wcdma / lte auto signal.
over and over again to be WCDMA preferred.
I press * # * # 4636 # * # * and change this, but do not leave it as fixed.
voice network works, but the calls are cut
I hope your help from chile
Click to expand...
Click to collapse
Wrong forum, please go here.
help
StormyNight said:
Wrong forum, please go here.
Click to expand...
Click to collapse
could be a little more specific?
i dont know where find info about this.
thank´s
miltoneski said:
could be a little more specific?
i dont know where find info about this.
thank´s
Click to expand...
Click to collapse
The forum you're posting in right now is the Sprint HTC One M7 forum. You have the M8, therefore go to the Sprint HTC One M8 forum.
With the 4636 menu what setting should I be choosing to stay in 4G? I'm in Chicago and I have terrible 4G to 3G handoffs all the time.
Sent from my HTCONE using Tapatalk
Related
Does N1 have 3.5G capability?
If not, is it possible to add that capability via Android upgrade?
Sorry if my question is too noobishly.
l1k3m1k3 said:
Sorry if my question is too noobishly.
Click to expand...
Click to collapse
It is. Incredibly so.
3.5G = HSDPA
HSDPA is on pretty much any phone that's been released in the past few years.
>_>
Thanks.
Rusty! said:
It is. Incredibly so.
3.5G = HSDPA
HSDPA is on pretty much any phone that's been released in the past few years.
Click to expand...
Click to collapse
can i get the H icon or HSDPA option in the the phone info but i dont wanna root my mobile nexus one
Change 3g to 3.5g, hello XDA, i know this is rooted world, but can i get the HSDPA option in my nexus one through *#*#info#*#* so i can set it to 3.5g as i cannot see any H icon or more i only see 3G always,
i only see the options WCDMA only WCDMA preferred and other CDMA etc...
can any one help me to change 3g to H or 3.5G please when i connect the same data line to computer its HSPA connection but on my nexus one its not.
hello i dont want to root my phone
thank you
Unfortunately, without rooting your phone, you can't get HSPA differentiation. That's actually a big draw for many people in order to root and load someone's ROM.
The reason for this is that the framework-res.apk file (the file that houses the actual pictures that make up your status bar, among other things, does not include an H icon. It only has 3G for both states. At least setting it to WCDMA preferred or WCDMA only (what I use), you know that you're most likely on 3.5G.
ruhismile said:
Change 3g to 3.5g, hello XDA, i know this is rooted world, but can i get the HSDPA option in my nexus one through *#*#info#*#* so i can set it to 3.5g as i cannot see any H icon or more i only see 3G always,
i only see the options WCDMA only WCDMA preferred and other CDMA etc...
can any one help me to change 3g to H or 3.5G please when i connect the same data line to computer its HSPA connection but on my nexus one its not.
hello i dont want to root my phone
thank you
Click to expand...
Click to collapse
Thanks for your reply mate I hope we get some official update so we can get the hspa or atleast hspda
Sent from my Nexus One using XDA App
Ok, I see some potential misunderstanding here.
Working on HSxPA isn't up to your phone - it's up to your cellular carrier. If you have HSxPA network capability - the phone will use it, because it's capable of using it. You can't make it use more or less of it, it's either used or not used.
On the other hand, the icons above may not show "H" for HSxPA, it depends on the ROM. AFAIK some European Vodafone ROMs show "H", but stock Google ROMs don't. If all you're looking for is "H" icon - then your best bet is to root and install custom ROM.
You need to root to get that icon.
Why I don't see hsdpa option while using #*#*4636#*#* only wcdma
Sent from my Nexus One using XDA App
Thanks mate for your reply I will never root my Nexus one
Sent from my Nexus One using XDA App
Why not its so easy? Warrenty?
Err sorry. I wasn't clear enough. What I meant was that you may be in HSPA but it won't say it unless you load a custom ROM.
Go to Settings -> About Phone -> Status Under network type, you should see HSDPA.
Threads Merged.
Two topics right next to each other asking the exact same question. Next time, please look for similar threads / use the search function.
Thank you.
I might if I had two phones but I don't and I can't afford
Sent from my Nexus One using XDA App
I was first and searched but no forums it say hsdpa in setting but its not its wcdma in *#*#4636#*#* I want to set there hsdpa thanks anyway
Sent from my Nexus One using XDA App
You can't lock the phone on HSDPA, and you don't want to even if you could.
ruhismile said:
I was first and searched but no forums it say hsdpa in setting but its not its wcdma in *#*#4636#*#* I want to set there hsdpa thanks anyway
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Did you try going to Settings -> About Phone -> Status and then looking for Network Type? There is where you should see HSDPA if available. My Nexus One on Tmo US showed it even before I rooted and enabled HSPA differentiation (the icon showing H instead of 3G when on HSPA).
willverduzco said:
Err sorry. I wasn't clear enough. What I meant was that you may be in HSPA but it won't say it unless you load a custom ROM.
Go to Settings -> About Phone -> Status Under network type, you should see HSDPA.
Click to expand...
Click to collapse
Not true, you just need a modified framework-res.apk
Yes. It shows hsdpa in settings but not info where we set the network thanks
Sent from my Nexus One using XDA App
Doesn't seem to be a way to turn LTE off to conserve battery. I mean, you can turn off Mobile Data all together but that seems to be the only option.
On previous phones I have always tried to go through the day with the slowest data possible to conserve battery, then when I am surfing on need the faster data, I just turn it on.
At least in the Canadian version we have the option to not pick LTE. In settings->Wireless & Networks -> mobile networks -> Network mode
These instructions for the Thunderbolt work. It's a bit much to go through every time you want to switch, though.
http://forums.androidcentral.com/verizon-htc-thunderbolt-forums/70282-how-turn-off-lte.html
*Edit*
Nevermind. It appears that you cannot change the default Preferred Network Type on this phone with that method.
zombie.raised said:
At least in the Canadian version we have the option to not pick LTE. In settings->Wireless & Networks -> mobile networks -> Network mode
Click to expand...
Click to collapse
Unfortunately the AT&T Phone does not have the Network Mode selection although I would guess once we get these phones rooted and what not we will probably see Rom's for AT&T That have that option included.
This would have been nice to do for those of us without LTE at the moment.
Also in the same boat wanting to turn off LTE and go to HSPA+ or even just Edge while I am in the office not using the device for anything other than text. Phone taken off charger at 8am and is now in the yellow range.
Can someone with a rogers version do the temp root, and then pull their settings apk for us? Would that do it if we install?
Sent from my HTC PH39100 using xda premium
diagnostic mode still works too, you can set your network via that.
dial from phone dialer "*#*#4636#*#*"
hit "phone information">"Set prefferred network type:"
(do not use the quote marks from above)
russell1997 said:
diagnostic mode still works too, you can set your network via that.
dial from phone dialer "*#*#4636#*#*"
hit "phone information">"Set prefferred network type:"
(do not use the quote marks from above)
Click to expand...
Click to collapse
Tried before. Doesn't work on att phones
Sent from my HTC PH39100 using xda premium
gtkansan said:
Tried before. Doesn't work on att phones
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
i have att and i just used the code and it worked?
it worked on the Aria and now the Vivid.
I have two and doesn't for either. It'll let you hit it, and act like it worked, but check the screen, sleection doesn't change. Always stays same
Sent from my HTC PH39100 using xda premium
gtkansan said:
Tried before. Doesn't work on att phones
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
gtkansan said:
I have two and doesn't for either. It'll let you hit it, and act like it worked, but check the screen, sleection doesn't change. Always stays same
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
I'll play with it on the Vivid but on the Aria, if I changed it and either toggled airplane mode or rebooted it would usually switched to what I changed it too. It would not change immediately after changing it in diagnostic mode.
russell1997 said:
I'll play with it on the Vivid but on the Aria, if I changed it and either toggled airplane mode or rebooted it would usually switched to what I changed it too. It would not change immediately after changing it in diagnostic mode.
Click to expand...
Click to collapse
Was your aria rooted when you did that?
russell1997 said:
diagnostic mode still works too, you can set your network via that.
dial from phone dialer "*#*#4636#*#*"
hit "phone information">"Set prefferred network type:"
(do not use the quote marks from above)
Click to expand...
Click to collapse
Worked for me, thank you.
AT&T lte phones have an lte radio that has automatic shutoff and fallback to hspa+ or 3g right I read it on engadget
Sent from my beastly HTC Vivid
... ... ...
Dkj7777 said:
AT&T lte phones have an lte radio that has automatic shutoff and fallback to hspa+ or 3g right I read it on engadget
Sent from my beastly HTC Vivid
Click to expand...
Click to collapse
No 3g on vivid. Only LTE, HSPA+, and Edge.
I'm going to the try logging in as well and will try the switch when i get the phone. Post up if you've had luck with either of them and if you've seen an increase in battery life.
http://forum.xda-developers.com/showthread.php?p=19170113#post19170113
Changing the APN will drop you off LTE. yay finally found a way!You can even then use the *#*#4636#*#* phone pref method to turn it to WCDMA and have it still. I hjope that means it turns off the LTE radio entirely. Will see with battery life.
Thanks... hopefully this helps battery life a bit.
That is my ONLY complaint about this phone so far... well that and the locked bootloader.
I'm looking for a method that will allow me to manually select what sort of mobile internet to use (LTE, HSPA+, EDGE).
This is for two reasons mainly:
1)Better battery life on 3G vs LTE
2)With a data cap I'd rather have lower speeds where I can control data usage better
3)All 4.2 ROMS do not show the mobile signal strength indicator on LTE but does show up for HSPA+ etc
I have tried several methods shown in various forums but to no avail. Also even unselecting 'automatic' and manually registering 3G under 'network operators' does not seem to fix this.
I am using T-Mobile in an LTE area.
Thanks
Mister_Simon said:
I'm looking for a method that will allow me to manually select what sort of mobile internet to use (LTE, HSPA+, EDGE).
This is for two reasons mainly:
1)Better battery life on 3G vs LTE
2)With a data cap I'd rather have lower speeds where I can control data usage better
3)All 4.2 ROMS do not show the mobile signal strength indicator on LTE but does show up for HSPA+ etc
I have tried several methods shown in various forums but to no avail. Also even unselecting 'automatic' and manually registering 3G under 'network operators' does not seem to fix this.
I am using T-Mobile in an LTE area.
Thanks
Click to expand...
Click to collapse
Dial *#*#4636#*#* and you can choose network options.... If you are on stock att or bell it will not work and you should download an app called network which also does the same...
Sent from my MB886 using xda app-developers app
Aingaran said:
Dial *#*#4636#*#* and you can choose network options.... If you are on stock att or bell it will not work and you should download an app called network which also does the same...
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
thanks will try it out.
Also, *#*#4636#*#* works on Mexican Retail (confirmed). And this fixes the problem for network signal indicator (not for LTE though)
Mister_Simon said:
thanks will try it out.
Also, *#*#4636#*#* works on Mexican Retail (confirmed). And this fixes the problem for network signal indicator (not for LTE though)
Click to expand...
Click to collapse
yes, i know it works on MR, thats why i mensioned att and bell specifically
What is going on
Aingaran said:
Dial *#*#4636#*#* and you can choose network options.... If you are on stock att or bell it will not work and you should download an app called network which also does the same...
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I have tried but everytime I click on lte or any other network it automatically flips right back to WCDMA.
I would like my phone to be connected to 3g all the time in order to save battery... Is there any way to do this? Changing to gsm, CDMA in network settings still gives me hspa.
Thnx
Sent from my One using XDA Premium HD app
EnIXmA said:
I would like my phone to be connected to 3g all the time in order to save battery... Is there any way to do this? Changing to gsm, CDMA in network settings still gives me hspa.
Thnx
Sent from my One using XDA Premium HD app
Click to expand...
Click to collapse
HSPA is still 3G. If you want you can select to use GSM only and you will only get EDGE connectivity.
Dial *#*#4636#*#* , go to phone information, and there's a dropdown which by default says WCDMA preferred. Switch that to whatever else you need. Also, remember that this setting does not stick after reboot so you need to reset it to your preference each time after you reboot your phone.
Misread, sorry.
Hi guys!
Im having this issue. *#*#4636#*#* when i dial this code it let me access to select what type of network i want. So i want to force to use LTE Only, but the signal get lost, not signal anymore. But when i change it to lte/gsm its works again. I know i have lte in the area but i cant get it in that way. Can anyone ccan try that and reports back if let u chanche the network? Thanks.
Sent from my Nexus 6 using XDA Free mobile app
Bestplayer55 said:
Hi guys!
Im having this issue. *#*#4636#*#* when i dial this code it let me access to select what type of network i want. So i want to force to use LTE Only, but the signal get lost, not signal anymore. But when i change it to lte/gsm its works again. I know i have lte in the area but i cant get it in that way. Can anyone ccan try that and reports back if let u chanche the network? Thanks.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
i change my networks all the time, without issue. if i put lte only, i get lte only. but cant make phone calls on it, so i use lte/gsm. if you dont have an lte signal, it will not connect to lte only.
simms22 said:
i change my networks all the time, without issue. if i put lte only, i get lte only. but cant make phone calls on it, so i use lte/gsm. if you dont have an lte signal, it will not connect to lte only.
Click to expand...
Click to collapse
Thanks.. But u get data working on lte only???
Sent from my Nexus 6 using XDA Free mobile app
Bestplayer55 said:
Thanks.. But u get data working on lte only???
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
yup, no issues. tmobile here.
simms22 said:
yup, no issues. tmobile here.
Click to expand...
Click to collapse
Im on claro puerto rico. Ure version is 5.0.1?
Sent from my Nexus 6 using XDA Free mobile app
Bestplayer55 said:
Im on claro puerto rico. Ure version is 5.0.1?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
no, im on 5.0.2, but that wont make any difference.
I have an issue where my Nexus 6 will boot with LTE, but once it looses from getting/making a call it cannot regain it.
TopHATTwaffle said:
I have an issue where my Nexus 6 will boot with LTE, but once it looses from getting/making a call it cannot regain it.
Click to expand...
Click to collapse
Which company ?
Sent from my Nexus 6 using XDA Free mobile app
Bestplayer55 said:
Which company ?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
T-Mobile. Let the device sit overnight and it got LTE back. So it seems either the LTE radio in this device is terrible compared to my Note 3, or it just won't attempt to get back onto LTE all that often. Or my Devices LTE radio is messed up.
TopHATTwaffle said:
T-Mobile. Let the device sit overnight and it got LTE back. So it seems either the LTE radio in this device is terrible compared to my Note 3, or it just won't attempt to get back onto LTE all that often. Or my Devices LTE radio is messed up.
Click to expand...
Click to collapse
Telus Canada. XT1103.
Mine would stay on H+ after a call for a long time. I sometimes "force" it to connect to LTE by toggling cellular data and off in settings. Or a reboot.
Have tried the *#*#4636#*#* menu to change to "LTE only", but won't even connect to LTE in this case.
This feels like a software issue. Clearly it's not a network or hardware issue, since it can connect to LTE.
aa_chow said:
Telus Canada. XT1103.
Mine would stay on H+ after a call for a long time. I sometimes "force" it to connect to LTE by toggling cellular data and off in settings. Or a reboot.
Have tried the *#*#4636#*#* menu to change to "LTE only", but won't even connect to LTE in this case.
This feels like a software issue. Clearly it's not a network or hardware issue, since it can connect to LTE.
Click to expand...
Click to collapse
if its not connecting to lte when you set it to lte only, then you either dont have lte around when you set it or its an extremely weak signal.
aa_chow said:
Telus Canada. XT1103.
Mine would stay on H+ after a call for a long time. I sometimes "force" it to connect to LTE by toggling cellular data and off in settings. Or a reboot.
Have tried the *#*#4636#*#* menu to change to "LTE only", but won't even connect to LTE in this case.
This feels like a software issue. Clearly it's not a network or hardware issue, since it can connect to LTE.
Click to expand...
Click to collapse
Unfortunately, it depends a lot on where you are. The office building that I am in is very bad for LTE, signal at my desk is -100dbm, if I go outside it switches up to around -60 to -70dbm. If I choose 3G as the preferred network, sitting in exactly the same location the signal goes to -75dbm 19 au. If I am at my apartment, the LTE signal is much stronger there. This of course effects the battery life also. I am not sure if there is a way to default which LTE band is used since I think Telus only uses band 4 for LTE but I am not familiar with how the phone determines which band to use or if it keeps scanning all of them.
simms22 said:
if its not connecting to lte when you set it to lte only, then you either dont have lte around when you set it or its an extremely weak signal.
Click to expand...
Click to collapse
No, where I was testing it, LTE was strong. I also had a Nexus 5 right beside it, and it had no problem acquiring a full signal.
With the Nexus 6, after a reboot or the data toggle, it acquired LTE, again almost full signal.
So I decided to just leave it alone and use it as normal without worrying about LTE or H+. I did not toggle data or reboot, just leave it as is. I just observe. After a few days, it seems better in that it will be connect to LTE a short while after a call, and behaves like how I expected it to like on the Nexus 5.
Of course, immediately after a call, it will stay on H+. If I really wanted LTE right then, I just toggle the data on/off from settings (not by setting to "LTE only" in *#*#4636#*#* menu).
aa_chow said:
So I decided to just leave it alone and use it as normal without worrying about LTE or H+. I did not toggle data or reboot, just leave it as is. I just observe. After a few days, it seems better in that it will be connect to LTE a short while after a call, and behaves like how I expected it to like on the Nexus 5.
Of course, immediately after a call, it will stay on H+. If I really wanted LTE right then, I just toggle the data on/off from settings (not by setting to "LTE only" in *#*#4636#*#* menu).
Click to expand...
Click to collapse
Ugghh lte data is hardly showing now went into dialer typed in code...it wont let lte only stick when i reboot is goes back to lte/gsm (auto)? Im on tmobile
Btw whats usa band? Thanks