[ROM][N5110][4.2.2]Unofficial CM10.1 [7/23/2013] - Galaxy Note 8.0 (Tablet) Original Android Developm

Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: JB 4.2 will move anything in /sdcard to /sdcard/0 on first boot. If you revert back to JB 4.1 you will have to manually move things back
These are Unofficial CM 10.1 builds for the Galaxy Note 8.0 GT-N5110
It is recommended to flashed this in CWM .
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (http://goo.im/gapps)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
All source is on my github: http://www.github.com/sbrissen
Known Bugs:
- Screen Off Animation
- Bluetooth is flaky
-????
[Alpha 1]ROM: http://www.androidfilehost.com/?fid=23050663588004028
Changes:
- Initial Release
[Alpha 1.1]ROM: http://www.androidfilehost.com/?fid=23050663588004170
Changes:
- Fix youtube / streaming video
- Fix light sensor (Autobrightness should work now)
NOTE: moving to dated builds instead of Alpha...
[7/23/13]ROM: http://www.androidfilehost.com/?fid=23060877489995975
Changes:
- Fix sensors causing reboot (thanks Maui)
- disable touchkey timeout (kernel driver doesn't support this, possibly in future?)
- Fix CABC (content adaptive backlight control) in Advanced Settings

Wow i'm happy to see the first aosp on 5110....nice work
Inviato dal mio GT-N7100 con Tapatalk 4

sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: JB 4.2 will move anything in /sdcard to /sdcard/0 on first boot. If you revert back to JB 4.1 you will have to manually move things back
These are Unofficial CM 10.1 builds for the Galaxy Note 8.0 GT-N5110
It is recommended to flashed this in CWM .
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (http://goo.im/gapps)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-GPS??
-Light/Prox Sensors are not working (DISABLE AUTO-BRIGHTNESS!)
-????
[Alpha 1]ROM: http://www.androidfilehost.com/?fid=23050663588004028
Changes:
- Initial Release
Click to expand...
Click to collapse
like clock work :laugh:
nice one bro, like i said earlier I'm on it in a bit, when i get to the house!: :thumbup:

Oh wow, just made my day!!!!
Sent from my GT-N5110 using Tapatalk 2

Only 156 mb for the rom? Wow.
Sent from my GT-N5110 using Tapatalk HD

Please N5100

No apps to SD?
Sent from my GT-N5110 using Tapatalk HD

launched on N5100!its work,but it does not ring!what modules are due to be overthrown from N5100

godraxe said:
launched on N5100!its work,but it does not ring!what modules are due to be overthrown from N5100
Click to expand...
Click to collapse
That's because the 5110 which this rom is for has no phone modem; only WiFi.
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
hermeticist said:
That's because the 5110 which this rom is for has no phone modem; only WiFi.
Click to expand...
Click to collapse
Good to see the Legendary Sbrissen working his magic on the Note 8.
First here as he was first for the Sprint Epic 4G Touch!

hermeticist said:
That's because the 5110 which this rom is for has no phone modem; only WiFi.
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
Good to see the Legendary Sbrissen working his magic on the Note 8.
First here as he was first for the Sprint Epic 4G Touch!
Click to expand...
Click to collapse
I understand why I'm asking, why do you need to pull out of its firmware N5100 to earn a N5100

nice Scott; great to see you on this device! :good:

I've been contacted by someone with a 5100 and we are working to get that going.
I've fixed the streaming video issue, trying to fix up the prox/light sensors before dropping another build.
Stay tuned to Alpha 1.1 today
I believe the apps2sd requires an app from the market?? I don't use it so I'm not entirely sure. Any other bugs???

Do we have to wipe system to install on Touchwiz?

hermeticist said:
Do we have to wipe system to install on Touchwiz?
Click to expand...
Click to collapse
no, just wipe data

sbrissen said:
I've been contacted by someone with a 5100 and we are working to get that going.
I've fixed the streaming video issue, trying to fix up the prox/light sensors before dropping another build.
Stay tuned to Alpha 1.1 today
I believe the apps2sd requires an app from the market?? I don't use it so I'm not entirely sure. Any other bugs???
Click to expand...
Click to collapse
tnx great man!wait for N5100 :good:

sbrissen said:
I've been contacted by someone with a 5100 and we are working to get that going.
I've fixed the streaming video issue, trying to fix up the prox/light sensors before dropping another build.
Stay tuned to Alpha 1.1 today
I believe the apps2sd requires an app from the market?? I don't use it so I'm not entirely sure. Any other bugs???
Click to expand...
Click to collapse
Apps2sd is in the the new build some how. It never worked, app or no app, originally.
Your build is fast though, no doubt.
Sent from my GT-N5110 using Tapatalk HD

@sbrissen I have the 5100 if you need any testing. Yes I know how to logcat/kmsg/dmesg
I am also on freenode regularly burgd is my handle if need be.

Will it come to N5120 LTE version?
Seems it is not very popular version in Note 8.0 family.

morgand536 said:
Will it come to N5120 LTE version?
Seems it is not very popular version in Note 8.0 family.
Click to expand...
Click to collapse
This can be used as a base and with (for the most part) a few changes it shouldn't be too hard.

sbrissen said:
This can be used as a base and with (for the most part) a few changes it shouldn't be too hard.
Click to expand...
Click to collapse
for N5100 will surely?be very much want :crying:!I tested if you need!Russian forum waiting for your work!CM 10.1 from N5100 please

Related

[TEST BUILD] CM10 Port For Vibrant [V9]

I will no longer be maintaining this port, as I have upgraded to a galaxy s3! If anyone wants to take over and or needs instructions for porting this ROM themselves, just send me a message!
Credits go to DerTeufel1980, be18, and all of the other International Galaxy S devs for Jelly Bean!
This is just a slightly modified version of the build for the International SGS (original thread here: http://forum.xda-developers.com/showthread.php?t=1775169)
Steps for flashing
For V9:
1a) If coming from another rom: wipe data/factory reset/format system/wipe cache/wipe dalvik cache
1b) If coming from previous version: delete folder /data/sys-parts before flashing (you should be fine without wipe, but delteing this folder is important), wipe cache, wipe dalvik cache
2) Flash ROM
3) Flash kernel
4) Flash addon (don't flash gapps from an other rom!)
5) Fix permissions
6) Reboot
Downloads
ROM (V8): http://www.mediafire.com/?zxmw7fulb516lcs
Kernel (Use this kernel for V9): http://rootaxbox.no-ip.org/divers/104/jellybean/Devil3_1.0.4_jb_vibrant_CFS_BLN_VC_20120727.zip
CM10 Addons (Use these addons for V9): http://rootaxbox.no-ip.org/divers/devil_jellybean/addons/cm10_addons_devil-V8b.zip
What Works
- Calls/SMS
- Data
- Wifi
- Camera
- Bluetooth (not tested yet)
- GPS
- Google Now
- Google sound recognition (for indentifying music)
- Everything else that isn't listed below...
What Doesn't Work
- Mounting of external sd card to computer (??)
- Others??
Trouble Shooting:
FOR STATUS 7 ERROR
1. Download the Icy Glitch V14 kernel >http://androtransfer.com/latest/vibrant
2. Put the file in your internet SD and Flash the kernel
DO NOT REBOOT
3. In CWM go to ADVANCED -> REBOOT RECOVERY
4. Follow the normal steps in the new CWM console
~ Thanks Waldos!
- If you experience considerable lag after updating from a previous version, flash the rom again and make sure to wipe data and perform a factory reset in the process.
Change log:
V2
- rom slimmed down and gapps/su fix included (thx to bhu1)
- replaced ear.apk with one supposed to work (user report)
- replaced hw composer with the one from nexus s (this is the jb one, old release was using ics hw composer)
- fixed recording of 720p (upstream fix to media_profiles.xml
V2.1
- Added missing Google Sound Search library (Google Ears)
- Added Gmail back into system applications (for some reason it was left out of V2), and gmail notifications should work now!
- Changed build.prop to reflect that the device is a Samsung Vibrant
- Added stock Jelly Bean boot animation
V3
N/A
V4
- built from latest sources as of today (07/19/2012, 4 pm)
- /datadata partition now working
- google tts working now (pico tts already working before?)
- extended power menu
- more menus in settings (some of them still are not finished and lead to a force close of the settings)
- all kernel settings stick after reboot
- using "data-symlink-script" from RolluS to get everything into the rom many thanks for this.
V5
- based on the last release by pawitp (compiled rom is not booting atm, i hope this gets fixed soon)
- fixed notification sounds
V6
- compiled from sources of 23/07/2012, 2 pm
- new boot animation
- removed apex launcher
- fixed installing bug: no need for delting data/sys-parts anymore
V8
- compiled from sources of 25/07/2012
- moved some files from sys-parts back to system and the other way around (trying to optimize the use of /system space)
V9
kernel (1.0.4):
- hack mfc driver, to give all available mem to an application, if the requested mem is more than the max. available (maybe useful later, does not change anything right now (afaik))
- fix execution of boot-patch.sh, disabled twice execution of init.d, enabled tv-out server for all devices (i9000 already had this)
- battery: fix charging display for car dock
- increase read-ahead on moviNAND
Note: The back button is broken on the notification pull down!
User Videos
Thanks wolfie083188!
_____________________________________________
I will keep this updated! If anyone can help to fix these bugs (especially the Camera bug because it seems to be Vibrant specific!), I would really appreciate it!
~ Go L Den
The vibrant shall get jellybean!!!!!!!!!!!!
What is "cm 10 fix"?
Sent from my SGH-T959 using xda premium
Just flashed all the Fixes/Gapps on the release FE did a hour ago, and they all work.
But yes, same issues as you listed in the OP.
Wow this is so close to actually being a daily rom!
Sent from my SGH-T959 using Tapatalk 2
kevho00 said:
Wow this is so close to actually being a daily rom!
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
I'm actually going to try it out for a whole day tomorrow.
I'm restoring all my apps with titanium right now. Wow that was quick!
I might do it as well. F*ck it. I'm doing the same.
Sent from my SGH-T959 using Tapatalk 2
Great job man,downloading now .
If I didn't need a stable from for work, I would be all over this. I still may give in. See what a few days of testing brings in.
Sent from my SGH-T959 using Tapatalk 2
john9 said:
Great job man,downloading now .
Click to expand...
Click to collapse
Can anyone post some screenies?
Woah Woah woah I got a build prop error!
GT-i9000? I know its a port, but it didn't let me install.
Let me flash i9000 cm9 and try again. I'll be back .
kevho00 said:
Woah Woah woah I got a build prop error!
GT-i9000? I know its a port, but it didn't let me install.
Let me flash i9000 cm9 and try again. I'll be back .
Click to expand...
Click to collapse
Try flashing glitch kernel on the rom you were on, and then flashing this.
xriderx66 said:
Try flashing glitch kernel on the rom you were on, and then flashing this.
Click to expand...
Click to collapse
awesome that worked! Booting now. I'll be testing for the next few days. I'll be back tomorrow. Thanks everyone! Goodnight!
Flashing Glitch kernel then the rom worked, I am going to install the rest of the steps.
Edit: Rebooting here we go!
Stupid Question: How do you take on phone screen shots? Like everyone else does.
kevho00 said:
awesome that worked! Booting now. I'll be testing for the next few days. I'll be back tomorrow. Thanks everyone! Goodnight!
Click to expand...
Click to collapse
Hey can you make sure that Alarm works? I'm using it right now and my alarm is not working.
Actually, no sounds work and I really need my alarm tomorrow, so I guess time to flash back...
It's smooth which is nice. Can't download anything from market this is the error:
(Error retrieving information from server. [RPC: AEC:0]
Sounds works for me.
nafeasonto said:
It's smooth which is nice. Can't download anything from market this is the error:
(Error retrieving information from server. [RPC: AEC:0]
Sounds works for me.
Click to expand...
Click to collapse
Did u flash JB gaps version. Worked for me as well as dound
Sent from my SGH-T959 using xda premium
Yes I flashed everything everything int he exact order from the OP. I forgot to Fix permissions maybe that's why.
How do I take screenies?
Got it.
nafeasonto said:
Yes I flashed everything everything int he exact order from the OP. I forgot to Fix permissions maybe that's why.
How do I take screenies?
Nope still can't..
Click to expand...
Click to collapse
Same as ICS. Vol - and power button
Sent from my SGH-T959 using xda premium
Hey! *I know i was suppose to be gone but I couldn't stop playing with jellybean!* Camera works for me ;D with gaaps installed!
Edit: Auto Rotation is turned off by default. Enable it in settings> accessibility
Sent from my GT-I9000 using Tapatalk 2

[ROM] CM10 Builds WIFI 2012.09.26

I’ve been compiling some Cyanogenmod 10 builds for my tab recently and I've decided to share them here. The Cyanogenmod project is still under heavy development, so there will be bugs. Although I will be testing the wifi builds before I post them I may not be able to catch all bugs before I release the build; install these builds at your own risk and be aware of what you are doing. I take no responsibility for any damage caused by these builds. If I notice small bugs while testing I will make a note of them with the release. I plan on updating these builds every week or so.
Thanks to:
The Cyanogenmod team and pershoot- This is all their work, I am simply compiling their code.
RootzWiki - Providing gapps packages
Changelogs:
If there are major changes I will try to note them along with the builds, but for all other changes refer to the Cyanogenmod code review system: http://review.cyanogenmod.com/#q,status:merged,n,z
For gapps changelogs, refer to the RootzWiki gapps page: http://wiki.rootzwiki.com/Gapps
Builds:
2012.09.26
ROM:
Mirror 1: http://www.mediafire.com/?jbqzc4n7hrvyhc6
Mirror 2: http://d-h.st/7lc
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 0ee6e5aa65f2b203d5893aedcc4349b4
2012.09.16
ROM:
Mirror 1: http://www.mediafire.com/?lh7db75g7vfd0hc
Mirror 2: http://d-h.st/Pvr
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 719c05c28d8815c7c3e0382ce10b5c83
2012.09.01
ROM:
Mirror 1: http://www.mediafire.com/?lm54mos2u690chg
Mirror 2: http://d-h.st/xV3
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 00ecd9dcde56f399c0ea3fa866f8ef5e
NOTE: Pershoot mentioned in his build notes that the goo.im july 26 gapps caused problems with his installation. I have tested this package on my build and it is working just fine. I think the problem is fixed but if you have issues try the older package.
Instructions:
1. Make a nandroid backup and save it in a safe place.
2. Wipe data, cache, and dalvik cache.
3. Install ROM zip in CWM.
4. Install GAPPS zip in CWM.
5. Reboot
Note: A wipe is probably not required for every single build, but it can't hurt. Make sure you make a backup even if you don't wipe.
If you enjoy these builds, you may wish to make a donation:
Cyanogenmod - http://www.cyanogenmod.com/ - See bottom of page
Nice
Second......
Sent from my ADR6425LVW using Tapatalk 2
Nice to see you back, CoffeeBeans.
TX
Gtalk audio works?
In The rom's Cyano no work
So far so good! Just a quick question. Is there anyway to just theme and change the battery to the circle mod or one like it? Thanks in advance!!
What kernel version is compiled with this build?
Not criticising, but was expecting front camera to work on this
ryanshapiro44 said:
So far so good! Just a quick question. Is there anyway to just theme and change the battery to the circle mod or one like it? Thanks in advance!!
Click to expand...
Click to collapse
If you go into Settings > System > Status Bar there is an option to change the battery status style. Unfortunately the percentage display doesn't seem to work but I'm sure CM will fix that soon. Your best bet for now is probably to enable it on the lock screen under Settings > Lock Screen > Battery status.
GalaxyNinja said:
What kernel version is compiled with this build?
Click to expand...
Click to collapse
2.6.36.4, pershoot hasn't added the 3.1 kernel to the jellybean repository just yet.
Ackoman said:
Not criticising, but was expecting front camera to work on this
Click to expand...
Click to collapse
Does it work on other cyanogenmod builds? If it does I can look into it.
Ackoman said:
Not criticising, but was expecting front camera to work on this
Click to expand...
Click to collapse
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.
njfoses said:
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.
Click to expand...
Click to collapse
I thought coffeebean's rom might have been the latest iteration of this:
http://forum.xda-developers.com/showthread.php?p=30240005#post30240005
If you look at the names. CM= cyanogen. That link is AOSP. Android open source. Totally differwnt
Thank you Coffeebeans, this one is all ready better then the last experimental from pershoot! I find it smoother and with better battery performance!! Sweet
i tried installing this :/ but i got Status 7 error on CWM6 it said some symlinks dont match , im using cwm6 that pershoot included
mrvtec69 said:
i tried installing this :/ but i got Status 7 error on CWM6 it said some symlinks dont match , im using cwm6 that pershoot included
Click to expand...
Click to collapse
I've been using TWRP for a while. No problems so far but I haven't flashed anything since Pershoot's last build on droidbasement.com.
Is there a means to change the items in the notification popup menu (the one in the lower right that pops up when the clock is tapped). I know Maple got is right in AOSP, just not sure what he did. When I make it visible, it seems to truncate some of the options.
Nice work on the ROM.
Getting a lot of screen flicker all the sudden, not sure whats causing it or how to best diagnose it.
Sent from my GT-P7510 using XDA Premium HD app
snakecharmer23 said:
I've been using TWRP for a while. No problems so far but I haven't flashed anything since Pershoot's last build on droidbasement.com.
Click to expand...
Click to collapse
cwm is known for that thats why I switched to twrp I recommend flashing that to the tab then flashing this rom had the same problem
alexige said:
Getting a lot of screen flicker all the sudden, not sure whats causing it or how to best diagnose it.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Yes, that has suddenly started happening to me too
njfoses said:
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.
Click to expand...
Click to collapse
Just want to be sure, can front facing cam will ever work on cm10?. It seems all cm10 rom has been out of development. Cm stop buiding it and pershoot is not updating it supurb build recently. Want to know if jb is very difficult to treat? thanks

[ROM][N5110]Official CM 10.2 [JLS36I][11/18/13]

Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Official CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/CyanogenMod
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-BT voice search
ROM: http://download.cyanogenmod.org/?device=n5110
****** All links below this are UNOFFICIAL builds ******************
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997662
Changes:
- Initial Release
[8/27] ROM: http://www.androidfilehost.com/?fid=23060877490002894
Changes:
- Upstream CM changes
[9/12] ROM: http://www.androidfilehost.com/?fid=23134718111252562
Changes:
- Fixed graphical glitches / black screens
- Upstream CM changes
[9/20] ROM: http://www.androidfilehost.com/?fid=23134718111254117
Changes:
- changed to tvdpi (fixes icon blur)
- Upstream CM Changes (including netflix fix!)
[10/08] ROM: http://www.androidfilehost.com/?fid=23159073880934700
Changes:
- Boost speaker volume slightly
- Add opensource camera (fixes front cam freezing)
- Upstream CM Changes
[10/10] ROM: http://www.androidfilehost.com/?fid=23159073880935566
Changes:
- Updated to 4.3.1
- Add IRDA service/support (needs testing)
- Opensource Sensors (fixes incorrect light_sensor reading really high instead of 0 or -1)
- Correctly read Wifi mac address
- Charging tweaks (need charging speed tested)
[10/14] ROM: http://www.androidfilehost.com/?fid=23159073880936401
Changes:
- Upstream CM Changes
- Fix Haptic feedback for back/menu keys
- Fix screen staying on while tablet is off and charging
[10/23] ROM: http://www.androidfilehost.com/?fid=23189362627840660
Changes:
- Upstream CM Changes
- Fix magnetic cover support (turn on/off screen)
- Fix Bluetooth (99% sure this is good, can anyone else confirm?)
- Fix wifi mac address again (should be good for sure now)
please make for N5100 :crying:
thanks for this, Scott!
Can we use the 0301 Gapps?
Must use 4.3 gapps. Google them, they're out there.
thats what I thought..I have the PA gaaps. which are 4.3, so I will try them
thanks
EDIT: found the non pa gapps, so gonna use them..thanks again!
Thanks for the build.
One question: Is the source in your 10.2 branch current? I see last update 9 days ago and I'd like to fork it for my own try.
Gesendet von meinem GT-N5100 mit Tapatalk 4
Anyone having any luck with this rom? I downloaded it twice, clean install, etc... Everything force closes for me. Can't even type because the keyboard FC, the back button won't work, the top bar is all out of whack.
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
wase4711 said:
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
Click to expand...
Click to collapse
Yup, full wipe and PA 4.3 gaaps. Maybe I'll give it another go in a bit. I've got a good set up going as is, so even if I can't get it working it's not a huge deal.
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
wase4711 said:
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
Click to expand...
Click to collapse
Tried with no gapps and had no luck. Maybe just a bad download, although I did d/l twice.
edit - downloaded the rom one more time and installed the PA 4.3 gapps and all is well. Third time was the charm.
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
how long does it take / how difficult is it to compile these Roms? would love to help out development if I could figure out how to do it.
ddye said:
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
Please make it for N5120. :fingers-crossed:
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
No graphical glitches or black screens?
Click to expand...
Click to collapse
hermeticist said:
wase4711 said:
No graphical glitches or black screens?
Click to expand...
Click to collapse
havent noticed any yet
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
ddye said:
wase4711 said:
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
as long as you are rooted, you can install with no problems
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I installed 10.2 and 4.3 gapps and all seemed find until I ran titanium backup.
It couldn't get root access
try installing busybox, then reboot

[Kernel][N5110 / N5120 / N5100] DracoKernel r1

Supports all AOSP / CM based KitKat ROMs (Be sure to download the correct version)​
WARNING!: ​Only flash the kernel for your device, flashing the wrong kernel can/will lead to hard brick. Never try to install the 5110/5100 on to the 5120 and never install the 5120 on to the 5110/5100.​I recommend Trickster MOD and No-frills CPU Control to customize the kernel. ​
Use at your own risk.
Be sure to make a full nandroid backup before flashing.​I am not responsible for any damages that may occur.​
Features:
Linux 3.0.71
OC & UV support for CPU and GPU
Max CPU speed is 1920MHz
Max GPU speed is 700MHz
Exfat support
DynamicFSYNC
Governors: Adaptive, Pegasusq(default), Interactive, Powersave, Performance, Ondemand, Userspace, LulzActivQ, SmartassH3, ZZmoove.
ARCH-Power enabled
ZRAM
Dynamic read-ahead
Hotplugging enable/disable
TriangleAway Support
j4fs support
Frontswap Support
Click to expand...
Click to collapse
Downloads: DracoKernel
You will see two folders "Normal ROMs" and "Alternate ROMs"
Use the normal one if you are running: CM, AOSB, Slim, or Beanstalk.
Use alternate if you are running: Carbon or Omni
Since PAC adds its own custom frameworks, it will have its own version.
If you flash the wrong one, you will be stuck on the bootanimation. Easy fix, just go flash the other one.
Installation:
Flash in recovery.
Then flash SuperSU
Goals of this kernel:
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. It aims more for a good mix of all, not sacrificing stability and functionality in the end. With that being said, I am open to any suggestions and contributions, but I will only implement it in if it makes sense to me and does not hinder one's experience using this as a daily driver. Also, try to limit talk of benchmark scores because they do not accurately depict real life experience.
Source: https://github.com/ryukiri/DracoKernel
XDA:DevDB Information
[Kernel][N5110 / N5120 / N5100] DracoKernel, a Kernel for the Samsung Galaxy Note 8.0
Contributors
ryukiri
Kernel Special Features:
Version Information
Status: Testing
Created 2014-02-23
Last Updated 2014-05-03
Reserved
Changelog:
2.22.2014
Initial Release
Reserved
To Do:
Make sure it compiles with linaro and -O3 optimizations
BLN support
Check Boeffla sound problem
Doubletap2wake (low priority since our hardware limitations will cause it to have massive battery drain)
USB OTG
Touchwake(?)
Patch up to Linux 3.0.101
Dual boot (not sure since I don't use it much, but i may implement it in the future)
Suggestions?
Click to expand...
Click to collapse
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Dexxmor said:
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Click to expand...
Click to collapse
people could always use mobile odin though.
mobile seem not working on the current nightly, so unable to flash
Gekritzelt von meinem Note 8
Dexxmor said:
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Click to expand...
Click to collapse
Yeah, I was planning to so flashable zips in the future. This first release is like a beta. I need to make sure all 3 variants work properly. You have the n5100 right? I heard from tejkkarani that it takes forever to boot so hold off on flashing for now. (Great if anyone else could confirm this) I'm going to take a look at it today.
Sent from my GT-N5110 using Tapatalk
ryukiri said:
Yeah, I was planning to so flashable zips in the future. This first release is like a beta. I need to make sure all 3 variants work properly. You have the n5100 right? I heard from tejkkarani that it takes forever to boot so hold off on flashing for now. (Great if anyone else could confirm this) I'm going to take a look at it today.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
:cyclops:I have a N5100 also also waiting to try out kernel
matthewtech770 said:
:cyclops:I have a N5100 also also waiting to try out kernel
Click to expand...
Click to collapse
Can you test it?
ryukiri said:
Can you test it?
Click to expand...
Click to collapse
Cool I will i see it's a .img format how do I install this I think I know I have to replace the img in a CM11 I have downloaded and switch out the img and then reflash the CM11 rom right
matthewtech770 said:
Cool I will i see it's a .img format how do I install this I think I know I have to replace the img in a CM11 I have downloaded and switch out the img and then reflash the CM11 rom right
Click to expand...
Click to collapse
I sent you a PM. Its recommended to use Heimdall, but that way might work. Try it. I'll try to get a flashable zip asap. Computer is compiling a new ROM right now so I'll see after that.
EDIT: The flashable zip should be available soon. I'm testing it on my n5110. Check your PM in a few mins.
EDIT2: Sent you a PM, can you test it now?
ryukiri said:
I sent you a PM. Its recommended to use Heimdall, but that way might work. Try it. I'll try to get a flashable zip asap. Computer is compiling a new ROM right now so I'll see after that.
EDIT: The flashable zip should be available soon. I'm testing it on my n5110. Check your PM in a few mins.
EDIT2: Sent you a PM, can you test it now?
Click to expand...
Click to collapse
I flash the n5100 zip you sent me tab is still booting just the cm11 circle spinning around :crying:
matthewtech770 said:
I flash the n5100 zip you sent me tab is still booting just the cm11 circle spinning around :crying:
Click to expand...
Click to collapse
I apologize for the inconvenience. Just realized that this kernel does not work on anything but PAC. Therefore, I will spend a lot more time testing before releasing again. Thread will be closed until further notice.
Thread re-opened. Figured out the problem faster than I initially expected. Downloads are up for the N5110. I have personally tested them on the ROMs we have. There are two different versions for now so please download the correct one. Enjoy!
FYI: N5100 builds will start shortly (approximately 12-24 hours from now or so), and N5120 will start a day or two after that.
Edit: N5100 should be ready now.
Using on CM 11 (cm-11-20140226-NIGHTLY-n5100.zip) .. not bootloop for me. Works perfectly. As I have installed it just now cant comment on the performance or battery life. Using GravityBox (KK) with Xposed Framework. Didnt face any issues yet.
working with AOSB 1.3.0 on N5100 from 23rd February 2014 , no problem so far.
Boeffla sound app not support please fix
Is your kernel name is dirty Austin?
---------- Post added 27th February 2014 at 12:08 AM ---------- Previous post was 26th February 2014 at 11:59 PM ----------
Boefllia sound restarting the tablet not working art all
Kernel works good at my end (newest nightly). Good job
Gesendet von meinem Nexus 4 mit Tapatalk
rowihel2012 said:
Boeffla sound app not support please fix
Is your kernel name is dirty Austin?
---------- Post added 27th February 2014 at 12:08 AM ---------- Previous post was 26th February 2014 at 11:59 PM ----------
Boefllia sound restarting the tablet not working art all
Click to expand...
Click to collapse
whoops, just checked the code. I forgot to enable it in the defconfigs (files and everything are all in place though). I'll enable it next release. And no its not, I'm going to change the name to DracoKernel in future releases. Currently, thats not too high on my priority list.
Edit: Boeffla sound may take a while. Enabled it but app isn't recognizing that the kernel has the feature..
EDIT! nevermind, i'm an idiot, lol. thanks for this kernel by the way! definitely kicks major ass!

[ROM][CM 10.1]Samsung Galaxy Music (GT-S6010/L/12)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So thanks to a lot of help from dhinesh77 managed to build CM for the Galaxy Music. It is almost stable, it is your choice if you use it for daily use or not (bugs below). Since it is almost stable it will be an RC release.
Thanks to:
-Cyanogenmod Team for this awesome rom
-Big thanks to dhinesh77
-pawitp's patches
-xda forum
-If someone is missing please tell me
Patches
Patch to device/common for bluetooth to work: https://gist.github.com/pawitp/5411720.
Patch to hardware/libhardware for microphone to work: https://gist.github.com/pawitp/5449660
Patch to packages/app/Camera for antibanding settings: https://gist.github.com/pawitp/5450415
Patch to frameworks/native as a temporary workaround for hwc issue: https://gist.github.com/pawitp/6884849
Bugs
This are the most important bugs and the one I know so far:
-Bluetooth can only send files when it is recently turned on
-FM Radio
Requirements
You must have the CWM for the galaxy music, or TWRP
Also you must install cm over stock JB 4.1.X, installing from ICS 4.0.X will cause issues
Note: If after installing you have some problems about a pin unlock, try installing from a stock rom of another country
Install instructions
-Make a backup first just in case
-Wipe data/factory reset
-Flash CM 10.1 for galaxy music
-Flash gapps. Link here
NOTE: If you are upgrading from a previous version of CM 10.1 you can just install it without wiping and keep your data
Download links
MEGA: https://mega.nz/#!pRozCKia!obKoovyZ-rOJKOAqzqP7S091FCu007GKSITQ6qEIzwc
Dropbox: https://www.dropbox.com/s/f4cm1aum4m1strj/CM 10.1 ivoryss RC 8.1.zip?dl=0
Note
For those with the Galaxy Music Duos (GT-S6012) probably you will need to edit the updater-script in /META-INF/com/google/android/ and make it to match the device's name in your build.prop (it could be "ivoryss", "ivory" or "ivoryssxx". However, most of the cases this change isn't necessary
NOTE: Dual sim function won't work on the duos variant, only on cm 11 releases will work
Changelog
RC 8.1
-Add KSM (can be enabled on perfomance settings) Also I think in cm 10.1 doesn't bring unestablity issues as on cm 11
-Add CIFS module
-More compressed kernel
-Remove more vendor blobs
RC 8
-Removed some unused vendor blobs
-Removed multiuser
-Allowed lower brightness (I think :silly
-Added Volume Rocker Wake
-use open source audio_policy (fixes no sound on online calls)
-other small changes...
RC 7
-Add overclock (thanks to dhinesh corsica kernell)
-Add Multiuser support
RC6
-Fixed Offline Charging animation
RC5
-Fixed MTP
-More features to kernel
*InteractiveX governor added
*zen IO scheduler added
RC4
-Added new media_profiles.xml fixing video recording
-New features to the kernel
*Added to new governors (smartassv2 and lulzactive)
*Enabled interactive governor on the kernel
*Added two new I/O schedulers (SIO and ROW)
RC3
-New compiled build
-Fixed kernel source to work both wifi and calls
-Cleaned layout (removed torch toggle since there is no torch on Galaxy Music and removed other files)
RC2
-Replaced kernel with stock
*Fixes reboot call bug
*Wi-fi did not work anymore
RC1
-Initial realease
Source
Device tree: https://github.com/Alonso1398/android_device_samsung_ivoryss
Kernel source: https://github.com/Alonso1398/muZic_kernel_ivoryss
If you want to redistribute it (e.g. a youtube video) give proper credits, post the link to this thread and don't use things like adfly
If you are looking for newer CM versions:
-CM 11.0
-CM 12.1
Also, if you really felt grateful for my work, you can donate to me.
Alonso1398 said:
So thanks to a lot of help from dhinesh77 managed to build CM for the Galaxy Music. It is almost stable, it is your choice if you use it for daily use or not (bugs below). Since it is almost stable it will be an RC release.
Thanks to:
-Cyanogenmod Team for this awesome rom
-Big thanks to dhinesh77
-pawitp's patches
-xda forum
-If someone is missing please tell me
Bugs
This are the most important bugs and the one I know so far:
-Phone reboots by itself with incoming or outcoming calls (with incoming, the call will last like 3 seconds)
-The camera app closes when you select the video recorder
Requirements
You must have the CWM for the galaxy music, NOT TWRP. Post here
Install instructions
-Make a backup first just in case
-Wipe data/factory reset
-Wipe Cache
-Wipe Dalvik Cache on advanced
-Flash CM 10.1 for galaxy music
-Flash gapps. Link here
Download link
https://www.dropbox.com/s/w6m01xh1yo6au79/CM 10.1 ivoryss RC 1.zip
Also if someone can help me fixing the remaining bugs, that would be great. Phone call logcat and camera logcat
Note
For those with the Galaxy Music Duos (GT-S6012) probably you will need to edit the updater-script in /META-INF/com/google/android/ and change "ivoryss" for "ivory". I hope that's enough for making it to work on the duos variant
Click to expand...
Click to collapse
Thats great..thank you for your hard work . But how can we use it when the most important function of a phone doesnt work ?? :''(
Sent from my GT-S6012 using XDA Free mobile app
Alonso1398 said:
So thanks to a lot of help from dhinesh77 managed to build CM for the Galaxy Music. It is almost stable, it is your choice if you use it for daily use or not (bugs below). Since it is almost stable it will be an RC release.
Thanks to:
-Cyanogenmod Team for this awesome rom
-Big thanks to dhinesh77
-pawitp's patches
-xda forum
-If someone is missing please tell me
Bugs
This are the most important bugs and the one I know so far:
-Phone reboots by itself with incoming or outcoming calls (with incoming, the call will last like 3 seconds)
-The camera app closes when you select the video recorder
Requirements
You must have the CWM for the galaxy music, NOT TWRP. Post here
Install instructions
-Make a backup first just in case
-Wipe data/factory reset
-Wipe Cache
-Wipe Dalvik Cache on advanced
-Flash CM 10.1 for galaxy music
-Flash gapps. Link here
Download link
https://www.dropbox.com/s/w6m01xh1yo6au79/CM 10.1 ivoryss RC 1.zip
Also if someone can help me fixing the remaining bugs, that would be great. Phone call logcat and camera logcat
Note
For those with the Galaxy Music Duos (GT-S6012) probably you will need to edit the updater-script in /META-INF/com/google/android/ and change "ivoryss" for "ivory". I hope that's enough for making it to work on the duos variant
Click to expand...
Click to collapse
Sorry i dont have that much knowledge in coding i m studying 9th class and age is 14 y.o. so...sorry but i wanted to help u
9441Rahul9441 said:
Sorry i dont have that much knowledge in coding i m studying 9th class and age is 14 y.o. so...sorry but i wanted to help u
Click to expand...
Click to collapse
And i am a commerce student ..have no idea of coding
Sent from my GT-S6012 using XDA Free mobile app
9441Rahul9441 said:
Sorry i dont have that much knowledge in coding i m studying 9th class and age is 14 y.o. so...sorry but i wanted to help u
Click to expand...
Click to collapse
siddarthsmallya said:
And i am a commerce student ..have no idea of coding
Sent from my GT-S6012 using XDA Free mobile app
Click to expand...
Click to collapse
That's ok, I'm a student of 10th grade and 16 years old, and I don't know too much about coding too, will try to find a way of fixing at least the call bug
Alonso1398 said:
That's ok, I'm a student of 10th grade and 16 years old, and I don't know too much about coding too, will try to find a way of fixing at least the call bug
Click to expand...
Click to collapse
Wowwwwwwwwww too good man. Then how u managed to do this with out having much knowledge !!!
Sent from my GT-S6012 using XDA Free mobile app
siddarthsmallya said:
Wowwwwwwwwww too good man. Then how u managed to do this with out having much knowledge !!!
Sent from my GT-S6012 using XDA Free mobile app
Click to expand...
Click to collapse
Too Good :-0
---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------
Alonso1398 said:
That's ok, I'm a student of 10th grade and 16 years old, and I don't know too much about coding too, will try to find a way of fixing at least the call bug
Click to expand...
Click to collapse
Thats Great bro
---------- Post added at 08:28 PM ---------- Previous post was at 08:00 PM ----------
Alonso1398 said:
That's ok, I'm a student of 10th grade and 16 years old, and I don't know too much about coding too, will try to find a way of fixing at least the call bug
Click to expand...
Click to collapse
Googled for camera bugs in rom..
its something related to lib files
siddarthsmallya said:
Wowwwwwwwwww too good man. Then how u managed to do this with out having much knowledge !!!
Sent from my GT-S6012 using XDA Free mobile app
Click to expand...
Click to collapse
9441Rahul9441 said:
Too Good :-0
---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------
Thats Great bro
---------- Post added at 08:28 PM ---------- Previous post was at 08:00 PM ----------
Googled for camera bugs in rom..
its something related to lib files
Click to expand...
Click to collapse
I looked to a lot of guides of how to build cm and dhinesh77's device tree helped me a lot fixing bugs and coding was not needed for fixing that, it was mostly fixed with patches or missing libs.
Also tried to recover all lib and bin files from stock rom but that didn't fixed the last two bugs so will have to find other way
And I'm going to be out of home next week so please be patient if I take too much time fixing the bugs
Enviado desde mi MW0711 mediante Tapatalk
in my view the problem is with media_profiles.xml... i tried adapting many times but failed always.... still trying
Hello any progress???
Sent from my GT-S6012 using XDA Free mobile app
siddarthsmallya said:
Hello any progress???
Sent from my GT-S6012 using XDA Free mobile app
Click to expand...
Click to collapse
sadly not so much, I've been busy lately, just discovered the call problem was not related to proximity sensor at all, it's somehow related to sound, because if I make the sound no to work, the calls won't reboot the phone but of course, having no sound is worse
Enviado desde mi MW0711 mediante Tapatalk
Alonso1398 said:
sadly not so much, I've been busy lately, just discovered the call problem was not related to proximity sensor at all, it's somehow related to sound, because if I make the sound no to work, the calls won't reboot the phone but of course, having no sound is worse
Enviado desde mi MW0711 mediante Tapatalk
Click to expand...
Click to collapse
@Alonso1398, any progress likely on this project in the near/far future?
rahimali said:
@Alonso1398, any progress likely on this project in the near/far future?
Click to expand...
Click to collapse
I'm sorry, I've been absent for a very long time trying to fix that reboot call bug, and guess what? All time was the kernel I couldn't believe it was so easy to fix, so, now will update the first post with the link of the next release and will try to fix videorecording, please report if it works on third party apps
And sorry about those PM that didn't answered, I don't too much time and again will going to have exams
Edit: Dammit, now I think wifi is not working
Edit2: OK, new RC3 build with call and wifi working, download link at first post
What's next? I'm going to try to fix videorecorder and also may try to add new features to the kernel (governors and I/O schedulers)
Also maybe will try to fix mtp
Thank you .u havnt tried as I am in a busy season now. Has any tried it???
Sent from my GT-S6012 using XDA Free mobile app
Nice new release
Ok, just added to the first post the new RC 4 fixing video recording and adding some nice new features to the kernel.
I hope it works to you
Alonso1398 said:
Ok, just added to the first post the new RC 4 fixing video recording and adding some nice new features to the kernel.
I hope it works to you
Click to expand...
Click to collapse
Great job! :good:
Mirrors for RC4
Dev-Host
MediaFire
So if we install this in galaxy music duos then we wont be able to use both sims??
Sent from my GT-S6012 using XDA Free mobile app
siddarthsmallya said:
So if we install this in galaxy music duos then we wont be able to use both sims??
Sent from my GT-S6012 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, I'm sorry, only one sim will work, however, CM has dual sim support on CM 11 so it would work with both sims on future CM 11 releases
Alonso1398 said:
Yeah, I'm sorry, only one sim will work, however, CM has dual sim support on CM 11 so it would work with both sims on future CM 11 releases
Click to expand...
Click to collapse
thank you :good: Are you going to build CM 11 ??:angel:
Auto reboots on duos varient (ivory) !
Its not working on Samsung Galaxy Music Duos..after editing (updator script) and installing..it automaticly reboots by pressing any key!
#Alonso1398 can you give a method to run it on Galaxy Music Duos ivory..

Categories

Resources