Okay guys so you flashed the new 4.2.2 rom and lost root access then this thread is for you
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~``
So I spend 1 hour trying to find way to root the new 4.2.2 and came to this very easy method
HOW TO ROOT THE 4.2.2 Frimware BY SAMSUNG!!
1.Download the recovery .tar.md5 from the attachment it is philz touch recovery repacked by me for 4.2.2 thanks for phil for his recovery
2.Download the root .zip from the attachment
3.Place the root.zip in your EXTERNAL SDCARD
4.Reboot to download mode
5.Download odin.zip and extract the zip in a folder
6.Flash the recovery.tar.md5
7.After odin giving you sucsses
8.Rboot to recovery
9.Flash the root.zip
10.Reboot
11.HIT THE THANKS BUTTON
Note:WHEN YOU DOWNLOAD THE RECOVERY.TAR.MD5 YOU SHOULD DELELTE THE EXTRA EXTENTION WHICH IS .ZIP
REMMEBER I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOU DEVICE!!!
thnks
but what about Deodexed Rooted rom are you working on it @mythi
Is this Odin (attached) is sufficient to flash 4.2.2 firmware ?
Can you pl .specify the steps to flash firmware also?
Sent from my GT-P3100 using xda premium
Is it necessary to flash ur recovery.. As I have ketut repacked version of philz touch recovery.. This is necessary for dual boot.. Please explain?
¥ Help must be thanked ¥
Sent from Heaven
tonyking123 said:
thnks
but what about Deodexed Rooted rom are you working on it @mythi
Click to expand...
Click to collapse
YEAH surely just wait deodexing it!!!
god_creature said:
Is it necessary to flash ur recovery.. As I have ketut repacked version of philz touch recovery.. This is necessary for dual boot.. Please explain?
¥ Help must be thanked ¥
Sent from Heaven
Click to expand...
Click to collapse
remove dual boot as the kernel does not support 4.2.2 Sammy roms i thinks you still did not flash the new rom?????
mythi said:
YEAH surely just wait deodexing it!!!
Click to expand...
Click to collapse
ya waiting patiently since morning the time i started the thread of it first in General Section to till time my tab is ready to flash 4.2.2 i will keep my eye on this :silly:
tonyking123 said:
ya waiting patiently since morning the time i started the thread of it first in General Section to till time my tab is ready to flash 4.2.2 i will keep my eye on this :silly:
Click to expand...
Click to collapse
The rom is now avalible
As I found in another thread that the deodex version of the ROM has bootloop , I have decided to flash the official version first and then root it. I have not done anything before on my stock 4.1.2 I.e no CWM or root . For this ROM is it sufficient to keep system recovery or I have to install cwm recovery , after flashing through Odin does the warranty violated ? Please clear my doubt and also provide Odin link .
Thanks in advance .One more question, what about lag compare to 4.1.2 ?
Sent from my GT-P3100 using xda premium
I have flashed with mobile odin ... its allready rooted ... but my device process so slow ...
Sent from my GT-P3100 using xda premium
hey bro can you modify the stock p3100 stock v4.2.2 so that we can install it in p3110 plz............
with link http://forum.xda-developers.com/showthread.php?t=2389137
abhi8851 said:
hey bro can you modify the stock p3100 stock v4.2.2 so that we can install it in p3110 plz............
Click to expand...
Click to collapse
Don't worry Bro all Devs among them Mythi, are aware to make JB 4.2.2 run fine on your p3110
Can i set root.zip into internal sdcard (i don't have external one!) to root my 4.2.2 gtab2 ?
Any help to do that Thanks
why my odin can't found recovery.tar.md5 for flash ??? Can u check file recovery for me.Thx Bro
condandatcang said:
why my odin can't found recovery.tar.md5 for flash ??? Can u check file recovery for me.Thx Bro
Click to expand...
Click to collapse
u need to extract it from zip folder :good:
cf-autoroot works very well
To root 4.2.2. Buil just use the latest cf-autoroot for 4.1.2 it works like a charm
Looklearner said:
Can i set root.zip into internal sdcard (i don't have external one!) to root my 4.2.2 gtab2 ?
Any help to do that Thanks
Click to expand...
Click to collapse
Yes but odin wipes internal storage!!
axiopolis said:
To root 4.2.2. Buil just use the latest cf-autoroot for 4.1.2 it works like a charm
Click to expand...
Click to collapse
Noo dont use the cf auto root cuz it installs 4.1.2 recovery on 4.2.2 then recovery partition will be corrupted.,
Thanks !!!!! Going to try it at once
mythi said:
Okay guys so you flashed the new 4.2.2 rom and lost root access then this thread is for you
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~``
So I spend 1 hour trying to find way to root the new 4.2.2 and came to this very easy method
HOW TO ROOT THE 4.2.2 Frimware BY SAMSUNG!!
1.Download the recovery .tar.md5 from the attachment it is philz touch recovery repacked by me for 4.2.2 thanks for phil for his recovery
2.Download the root .zip from the attachment
3.Place the root.zip in your EXTERNAL SDCARD
4.Reboot to download mode
5.Download odin.zip and extract the zip in a folder
6.Flash the recovery.tar.md5
7.After odin giving you sucsses
8.Rboot to recovery
9.Flash the root.zip
10.Reboot
11.HIT THE THANKS BUTTON
Note:WHEN YOU DOWNLOAD THE RECOVERY.TAR.MD5 YOU SHOULD DELELTE THE EXTRA EXTENTION WHICH IS .ZIP
REMMEBER I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOU DEVICE!!!
Click to expand...
Click to collapse
I am going try it at once!!!!!! :fingers-crossed: Hope everything will go accordingly.....
OR you could follow my video since it's pretty much universal.
http://www.youtube.com/watch?v=pAvze-VNzj8
Related
Easiest Rooting Method for Galaxy note every Firmware (GB & ICS)-Rooting Only No CWM
More than one post on this
~~~THREAD CLOSED~~~
this is not my method just found this in the forums and wanted to share.
the credits are to the original developer dr.ketan .
This is the Easyest Method Without kernel flashing and Yes -- No Triangle
Confirmed Working and Tested on latest official LPY.
1- Flash any Stock firmware with PC or Mobile Odin
2- Let the phone is completly boot
3- Copy CWM.zip and Superuser busybox installer into the root of memory card
4- reboot into stock revovery
5- select update from zip and then slect the cwm.zip file
6- after flashing the phone will boot into CWM
7- flash the busyox superuser.zip through this CWM
8- after flashing reboot and now you have root
press thanks if it helps
for me,, its posible way to rooted the galaxy note.
Lol this is the third post on this same method
Mods where are thy?
Sent from my iPad using Tapatalk
Why do you state " no CWM" ?
Sent from my GT-N7000 using xda premium
The step number 5 must flash the CWM right ? why mention no CWM ? strange...
mnaveed said:
this is not my method just found this in the forums and wanted to share.
the credits are to the original developer.
i dont know who but anyway thanks to him
This is the Easyest Method Without kernel flashing and Yes -- No Triangle
Confirmed Working and Tested on latest official LPY.
1- Flash any Stock firmware with PC or Mobile Odin
2- Let the phone is completly boot
3- Copy CWM.zip and Superuser busybox installer into the root of memory card
4- reboot into stock revovery
5- select update from zip and then slect the cwm.zip file
6- after flashing the phone will boot into CWM
7- flash the busyox superuser.zip through this CWM
8- after flashing reboot and now you have root
press thanks if it helps
Click to expand...
Click to collapse
supercjlee said:
The step number 5 must flash the CWM right ? why mention no CWM ? strange...
Click to expand...
Click to collapse
after this method can you use Mobile Odin Pro ?
supercjlee said:
The step number 5 must flash the CWM right ? why mention no CWM ? strange...
Click to expand...
Click to collapse
cwm is not permanent
next time u boot into recovery it will be stock one
but root is permanent
andromeda1968 said:
after this method can you use Mobile Odin Pro ?
Click to expand...
Click to collapse
yes u can
oh thanks! i will try it tonight
Here is where you found this and who deserves credit, because yes it does work and works great!
http://forum.xda-developers.com/showthread.php?t=1329360
andreww88 said:
Here is where you found this and who deserves credit, because yes it does work and works great!
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
OP Edited
thanks
andromeda1968 said:
after this method can you use Mobile Odin Pro ?
Click to expand...
Click to collapse
mnaveed said:
yes u can
Click to expand...
Click to collapse
So after you can flash CFRoot kernel with mobile odin pro and make CWM permanent?
hm... got signature verification failed in red....
neos_83 said:
So after you can flash CFRoot kernel with mobile odin pro and make CWM permanent?
Click to expand...
Click to collapse
yes
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
ossamatarek said:
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Akiainavas said:
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Click to expand...
Click to collapse
Yes I can, I tried to downgrade to GB but it failed as well :/
I don't really clearly understood your issue.
But if you want to flash a Stock ICS Rom, start ODIN PC, start your SGNote in download mode (button volume down + home + power), then connect your SGNote to your PC and flash via ODIN PC.
If you don't know exactly how to use ODIN PC, check tutos on the forum.
ossamatarek said:
Yes I can, I tried to downgrade to GB but it failed as well :/
Click to expand...
Click to collapse
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
ossamatarek said:
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
Click to expand...
Click to collapse
I'm at work right now and I can't view imageshack because it's blocked on this computer.
andreww88 said:
I'm at work right now and I can't view imageshack because it's blocked on this computer.
Click to expand...
Click to collapse
Thanks for trying to help
Reinstall your ADB/USB drivers, make sure you're using USB2.0 port - for me USB3.0 always results in failed flash, ultimately switch USB ports.
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
The file you download from dr. Ketan is a .rar file, unzip it once and you get a .tar file. Flash that file with Odin in pda section. So don`t unzip the .tar file again.
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
The problem was the ROM itself
I flashed a new 4.0.3 and it worked perfectly
Thanks a lot.
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Akiainavas said:
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Click to expand...
Click to collapse
witch rom should i install first then?
and then with CWM to the zip file i can install this rom. thats nice
Who can help me with the rom i should have running on my note before i start this?
You should be on rooted ICS. Then you flash Criskelos rom from CWM
ossamatarek said:
Thanks for trying to help
Click to expand...
Click to collapse
upload it somewhere else then!
Belfia said:
You should be on rooted ICS. Then you flash Criskelos rom from CWM
Click to expand...
Click to collapse
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Richard.p.struike said:
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Click to expand...
Click to collapse
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
andreww88 said:
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
Click to expand...
Click to collapse
no still boots android revovery
i've tried 3 times but still the same
Richard.p.struike said:
no still boots android revovery
i've tried 3 times but still the same
Click to expand...
Click to collapse
So you have to flash the CWM.zip file found in drketan's thread in android development.
Hi, I have just upgrade my GT-N7000 from rooted ICS to the latest leaked JB XXLSA. I have been looking for the forum but I have no find the answer. How can I root the Rom XXLSA? I suppose that with PC odin, but I'm not sure what kernel should I flash
Thank you
Flash philz 3.71 krenel for xxlsa
Sent from my GT-N7000 using xda app-developers app
VinayakG30 said:
Flash philz 3.71 krenel for xxlsa
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i install ''PhilZ-cwm6-XXLSA-XJB-3.71.tar'' but no acsess root permission why? Cuz i can acsess cwm and when opening phone i see yellow triangle but ma phone say no acsess root permission. What your suggest?
install a super-su but nothing is change and i can't open super su. it's wanna root permission What can i do?
Install the zip version of the kernel using recovery not the tar version. You have flashed the tar version from PC Odin thats why you have a yellow triangle
Worked fine for me
I've been hunting for this information for ages having managed to brick my Note trying to install PA - thanks for the info - simple and to the point!
..and yep it worked!
nokiamodeln91 said:
Install the zip version of the kernel using recovery not the tar version. You have flashed the tar version from PC Odin thats why you have a yellow triangle
Click to expand...
Click to collapse
Hi, I am running XXLSA also and would like to Root it. Do you know a link with the step-by-step guide to rooting and upgrading XXLSA to the latest ROM version? Thanks!
rykel98 said:
Hi, I am running XXLSA also and would like to Root it. Do you know a link with the step-by-step guide to rooting and upgrading XXLSA to the latest ROM version? Thanks!
Click to expand...
Click to collapse
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
ThaiDai said:
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
Click to expand...
Click to collapse
Thanks ThaiDai! Where may I find Odin, Phil's Kernel and the Custom ROM? Any links?
rykel98 said:
Thanks ThaiDai! Where may I find Odin, Phil's Kernel and the Custom ROM? Any links?
Click to expand...
Click to collapse
In XDA developers forum you'll find everything because it has a clear structure of subforums and a fantastic search engine.
One more hint: you are already in one of the subforums you'll need - you'll only have to go one step up and use the two round things near your nose.
ThaiDai said:
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
Click to expand...
Click to collapse
Can I upgrade from XXLSA to XXLT4 with this method? I.E. can I install PhilZ XXLT4 kernel and then any XXLT4 rom with this method?
SpaffyXE said:
Can I upgrade from XXLSA to XXLT4 with this method? I.E. can I install PhilZ XXLT4 kernel and then any XXLT4 rom with this method?
Click to expand...
Click to collapse
Yes. Download philz kernel (zip file) go to recovery flash the zip file. Go back to recovery do the wipes. Download XXLT4 or XXLT5 and put the phone into download mode and flash XXLT4 or 5 using Odin. Once successfull, flash philz kernel again from recovery, you will have root and custom recovery.
hai guys i am new on Samsung.. I need some help.i have rooted my sony and installed custom ROMS. And as I am new to samsung am little confused. how can i root my S advance and install custom ROM . do I need to unlock the bootloader for installing JB.Currently having a GB version with DDLK2 firmware.. cant find anything about DDLK2 on the forum. please help
http://forum.xda-developers.com/showthread.php?t=2198341
This should help. And please post in the right section
Sent from my GT-I9070 using xda premium
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Vivek ps said:
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Click to expand...
Click to collapse
use kies or find your firmware country on sammobile
and please read the rules of xda
ps: or use "update software" in sittings\ about phone\...\
what can i do when phone is contnsly getting restarted??.. when i removed the sim card. then phone is not getting restarted
did u upgrade to jellybean.? use odin software to upgrade .indian firmware is DDULP8 (jellybean) which can b downloaded frm devhost or sammobile.com
ajeshmanu said:
did u upgrade to jellybean.? use odin software to upgrade .indian firmware is DDULP8 (jellybean) which can b downloaded frm devhost or sammobile.com
Click to expand...
Click to collapse
don't i need to unlock the bootloader and root the device before upgrading to jellybean???
Vivek ps said:
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Click to expand...
Click to collapse
Just flash any GB kernel after that and you'll be fine. Search for cocore 4.1 for GB.
---------- Post added at 06:03 PM ---------- Previous post was at 06:00 PM ----------
Vivek ps said:
don't i need to unlock the bootloader and root the device before upgrading to jellybean???
Click to expand...
Click to collapse
No you don't need to unlock the bootloader as iur device is practically made unlocked. So yeah it is unlocked already. Just flash the official 4.1.2 JB samsung firmware. No root needed.
arffrhn said:
Just flash any GB kernel after that and you'll be fine. Search for cocore 4.1 for GB.
---------- Post added at 06:03 PM ---------- Previous post was at 06:00 PM ----------
No you don't need to unlock the bootloader as iur device is practically made unlocked. So yeah it is unlocked already. Just flash the official 4.1.2 JB samsung firmware. No root needed.
Click to expand...
Click to collapse
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Vivek ps said:
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Click to expand...
Click to collapse
We do not have to unlock bootloader.
Install CoCore kernel, you will get custom recovery. And install ROM with it.
1. ROOT.
2. CoCore.
For first install of CoCore do this: Install Universal kernel flash, and some explorer with root permissions like Root explorer or ES file explorer. Download CoCore zip, unpack it and use kernel.bin.md5 file with Universal kernel flash. After that you will get CWM or TWRP (depends what CoCore version you choose). From that part you can change kernel by installing its zip from recovery.
3. Download JB custom ROM, copy to phone - and install it from recovery.
Vivek ps said:
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Click to expand...
Click to collapse
Yeah just like shut_down says above..we do not have to unlock bootloader. We can just flash the firmware. Sorry for the confusion.
This guide will help you with the whole process of upgrading and installing custom roms.
http://forum.xda-developers.com/showthread.php?t=2198341
shut_down said:
We do not have to unlock bootloader.
Install CoCore kernel, you will get custom recovery. And install ROM with it.
1. ROOT.
2. CoCore.
For first install of CoCore do this: Install Universal kernel flash, and some explorer with root permissions like Root explorer or ES file explorer. Download CoCore zip, unpack it and use kernel.bin.md5 file with Universal kernel flash. After that you will get CWM or TWRP (depends what CoCore version you choose). From that part you can change kernel by installing its zip from recovery.
3. Download JB custom ROM, copy to phone - and install it from recovery.
Click to expand...
Click to collapse
thanks for your awesome rply.. i rooted my device (JB now) and gonna install the cocoreE 6.8 kernel . u said to flash kernel.bin.md5 file with Universal kernel flash.. and after doing this and accessing the custom cwm do i need to install the cocore kernel zip from it again before installing custom ROM?
Vivek ps said:
thanks for your awesome rply.. i rooted my device (JB now) and gonna install the cocoreE 6.8 kernel . u said to flash kernel.bin.md5 file with Universal kernel flash.. and after doing this and accessing the custom cwm do i need to install the cocore kernel zip from it again before installing custom ROM?
Click to expand...
Click to collapse
You do not need to do it again, but you could. Because there are some other files in that zip - and those are not being installed with Universal kernel flash.
shut_down said:
You do not need to do it again, but you could. Because there are some other files in that zip - and those are not being installed with Universal kernel flash.
Click to expand...
Click to collapse
thanks bro.. installed a custom JB on my phone..but i have a small doubt. is it possible to make my device UNROOTED after flashing the stock JB or GB again?? ( actually i dont' need it now.. just asking ) and also will i be able to go back to the stock kernel if i flashed the STock JB?? Because my warranty is not yet over
Vivek ps said:
thanks bro.. installed a custom JB on my phone..but i have a small doubt. is it possible to make my device UNROOTED after flashing the stock JB or GB again?? ( actually i dont' need it now.. just asking ) and also will i be able to go back to the stock kernel if i flashed the STock JB?? Because my warranty is not yet over
Click to expand...
Click to collapse
When you flash stock JB firmware (not ROM) you get all stock, ready to pass warranty.
If you want to go to GB, you need to follow guide how to do that. Because you will get bootloop if you just flash GB from Sammobile.
shut_down said:
When you flash stock JB firmware (not ROM) you get all stock, ready to pass warranty.
If you want to go to GB, you need to follow guide how to do that. Because you will get bootloop if you just flash GB from Sammobile.
Click to expand...
Click to collapse
thank you so much.. but why it is stock JB "Firmware" and not ROM ????
Vivek ps said:
thank you so much.. but why it is stock JB "Firmware" and not ROM ????
Click to expand...
Click to collapse
Firmware is untouched system, for flashing with Odin. And ROM is modded files that can be installed with custom recovery. In short.
hey guys
i need a custom recovery for GT-I9070P not the normal one!!!
and also the .tar one file ... not the zip one.... the one can be flash through odin ... i mean for example recovery_for_I9070P.tar so i can flash it with odin ... also specify which android version should i be for this recovery ....
please dont give me the link to zip one which is temp recovery and should be install from stock recovery
thnks in advance
mastershex said:
hey guys
i need a custom recovery for GT-I9070P not the normal one!!!
and also the .tar one file ... not the zip one.... the one can be flash through odin ... i mean for example recovery_for_I9070P.tar so i can flash it with odin ... also specify which android version should i be for this recovery ....
please dont give me the link to zip one which is temp recovery and should be install from stock recovery
thnks in advance
Click to expand...
Click to collapse
For the start - on what version of Android are you now?
for both 2.3.6 and 4.1.2 .. no difference ... and if you have both ..then i would really appriciate ... if you have for another version of android then let me know...but for now i can be both on 2.3.6 and 4.1.2
mastershex said:
for both 2.3.6 and 4.1.2 .. no difference ... and if you have both ..then i would really appriciate ... if you have for another version of android then let me know...but for now i can be both on 2.3.6 and 4.1.2
Click to expand...
Click to collapse
I do not have odin flashable. But do this:
Root: http://forum.xda-developers.com/showthread.php?t=2087424
Install Universal kernel flasher and some root exlorer from play store
Install CoCore EP with Universal kernel flasher, download and unpack kernel.bin.md5 from here: http://forum.xda-developers.com/showthread.php?t=2140597
Reboot.
We have kernel and custom recovery on the same partition, so you must install it with kernel.
[QUOTE
Install CoCore EP with Universal kernel flasher, download and unpack kernel.bin.md5 from here: http://forum.xda-developers.com/showthread.php?t=2140597
We have kernel and custom recovery on the same partition, so you must install it with kernel.[/QUOTE]
i did not get the last part .... download it from the market or from this thread or from the universal kernel flasher ??
and put in sd card ??? a noobs explanation is required ..... am noob at this
mastershex said:
[QUOTE
Install CoCore EP with Universal kernel flasher, download and unpack kernel.bin.md5 from here: http://forum.xda-developers.com/showthread.php?t=2140597
We have kernel and custom recovery on the same partition, so you must install it with kernel.
Click to expand...
Click to collapse
You can install it from the play store, and install some root explorer like ES File explorer. Copy kernel.bin.md5 to sd card, in app browse for kernel and install it.
is the universal kernel flasher ok with """"CoCore-EP-8.6-CWM-Touch""""" ????
in version 1.4 its was comptible with """"""CoCore-EP-6.8-CWM """"" and no other news for"""""CoCore-EP-8.6-CWM-Touch""""""
if i flash this file inside CoCore-EP-8.6-CWM-Touch then i will have cwm recovery installed for ever untill i flash my phone again ????
no problem with phone during this recovery installed ???
thnaks for answering my noobs questions
mastershex said:
is the universal kernel flasher ok with """"CoCore-EP-8.6-CWM-Touch""""" ????
in version 1.4 its was comptible with """"""CoCore-EP-6.8-CWM """"" and no other news for"""""CoCore-EP-8.6-CWM-Touch""""""
if i flash this file inside CoCore-EP-8.6-CWM-Touch then i will have cwm recovery installed for ever untill i flash my phone again ????
no problem with phone during this recovery installed ???
thnaks for answering my noobs questions
Click to expand...
Click to collapse
UKF is compatibile with any CoCore, it might give you warning if it is some CoCore that is not added to its database, but you can ignore warning and install. Yes, you will have CWM permanently. There will be no problems for phone with it.
thanks bro and one more question is can i flash this cocore zip package through stock recovery while device is rooted ? then i will have recovery ???
mastershex said:
thanks bro and one more question is can i flash this cocore zip package through stock recovery while device is rooted ? then i will have recovery ???
Click to expand...
Click to collapse
No, you can do it when you install it first time. It needs CWM, it is for updating. You must do it the way I told you.
Or you can use shaan temporary CWM (I test and use it myself)
Download the "update.zip" from the thread, then flash the zip using stock recovery...
It works on ALL versions of android (yeah, even on 2.3.6)
Then if you want cocore, just flash the zip of cocore through recovery and done it, you got cocore on your phone...
Just don't forget to read the cocore thread and always remember cocore kernel only works at stock jb 4.1.2 based ROMs...
Shiningb said:
Or you can use shaan temporary CWM (I test and use it myself)
Download the "update.zip" from the thread, then flash the zip using stock recovery...
It works on ALL versions of android (yeah, even on 2.3.6)
Then if you want cocore, just flash the zip of cocore through recovery and done it, you got cocore on your phone...
Just don't forget to read the cocore thread and always remember cocore kernel only works at stock jb 4.1.2 based ROMs...
Click to expand...
Click to collapse
no matter what the baseband or rom version is ??? for exaple work on evey stock ROM ????
I9070PXXAEMF2 , I9070PXXMDAM and all other stock 4.1.2 ?????
mastershex said:
no matter what the baseband or rom version is ??? for exaple work on evey stock ROM ????
I9070PXXAEMF2 , I9070PXXMDAM and all other stock 4.1.2 ?????
Click to expand...
Click to collapse
Yes...
Since its temporary it will work on any ROM until next reboot...
Shiningb said:
Yes...
Since its temporary it will work on any ROM until next reboot...
Click to expand...
Click to collapse
but he said the recovery is permenantly and and wont remove untill the device is flashed with a 4 file stock rom !!!!!!!!
what now this method is a temp recovery or permenant ????? is cocore recovery is temp and be disapper with a single reboot or its permenant ????
mastershex said:
but he said the recovery is permenantly and and wont remove untill the device is flashed with a 4 file stock rom !!!!!!!!
what now this method is a temp recovery or permenant ????? is cocore recovery is temp and be disapper with a single reboot or its permenant ????
Click to expand...
Click to collapse
CoCore = permanent, Shaaan's CMW = temp.
P.S. And you can flash CoCore ZIP with that temp, then you get permanent. If you do not want to use Univeral kernel flasher.
I9
shut_down said:
CoCore = permanent, Shaaan's CMW = temp.
P.S. And you can flash CoCore ZIP with that temp, then you get permanent. If you do not want to use Univeral kernel flasher.
Click to expand...
Click to collapse
this is better .... would you give me the link to cwm temp recovery and instroduction pls bro ? for I9070P cwm recovery
mastershex said:
I9
this is better .... would you give me the link to cwm temp recovery and instroduction pls bro ? for I9070P cwm recovery
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1987313
thank you very much bro ... and one last thing do u have a link to a multi firmware package (4file) (3file) for I9070P ?