[Q] Force USB CarbonRom Nook HD+ - Nook HD, HD+ Q&A, Help & Troubleshooting

Is it possible to force USB on CarbonRom B11? I have a female - female USB adapter, and I'm attempting to connect a keyboard to my Nook HD+, but I haven't been able to find an option to force USB.

RySean said:
Is it possible to force USB on CarbonRom B11? I have a female - female USB adapter, and I'm attempting to connect a keyboard to my Nook HD+, but I haven't been able to find an option to force USB.
Click to expand...
Click to collapse
On b11 I have an app called usb host switch. I haven't tried a keyboard as I have a bluetooth one but it does work for usb drives.

jpisini said:
On b11 I have an app called usb host switch. I haven't tried a keyboard as I have a bluetooth one but it does work for usb drives.
Click to expand...
Click to collapse
Cool, thanks, it worked! Now I'm going to get a hub so I can connect mouse and keyboard. And I'm going to get a hub that has DC in, so we'll see if it can also be charged at the same time.

Let us know if charging works that would be very helpful.
Sent from my Galaxy Nexus using xda app-developers app

Related

How is the USB OTG supposed to work?

I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
BrotherZero said:
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
Click to expand...
Click to collapse
I got the same exact problem. It didn't seem to work at all.I think I'll have to order the adapter to see if the problem is the OTG cable or not
dannghiem0801 said:
I got the same exact problem. It didn't seem to work at all.I think I'll have to order the adapter to see if the problem is the OTG cable or not
Click to expand...
Click to collapse
I ordered some cheap ones from DX, but since there are two of them and none of them works I'm assuming it's the Nook the problem is with.
BrotherZero said:
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
Click to expand...
Click to collapse
It could be the USB-sticks are trying to draw too much power. The Nook host port will only supply low power USB devices (<100mA) and it is also best to have a fairly well charged battery. Some sticks work and others don't.
If you have a powered USB hub then this supplies the power so there is no problem. So try with a powered hub to at least see if that is the issue.
bobtidey said:
It could be the USB-sticks are trying to draw too much power. The Nook host port will only supply low power USB devices (<100mA) and it is also best to have a fairly well charged battery. Some sticks work and others don't.
If you have a powered USB hub then this supplies the power so there is no problem. So try with a powered hub to at least see if that is the issue.
Click to expand...
Click to collapse
I used the same USB in this chart Nook Color USB HOST Device Compatibility List Sandisk Cruzer 8GB on CM7
I bought the Nook Color is to connect it to my camera via DSLRcontroller but so far still not successfully with USB stick.
Read my thread , it should answer most if not all your questions
[23 Jan 2012][USER/DEV] USB Host Support & Development [CM7/CM9]
I'm hoping to get some free time and update it this weekend with more info and probably a widget
I could never get usb host working on cm7. I have been trying to use RYC usb to control my Nikon Dslr . Once i switch over to CM9 beta it worked first time.
Sent from my Nook Color (CM9 ICS Beta)
Dj-Gutz said:
Read my thread , it should answer most if not all your questions
[23 Jan 2012][USER/DEV] USB Host Support & Development [CM7/CM9]
I'm hoping to get some free time and update it this weekend with more info and probably a widget
Click to expand...
Click to collapse
I have read this thread over and over again. Ill try to run CM9 soon to see if it works
Sent from my NookColor using Tapatalk
CM7 also shouldn't give you any trouble , as long as its FAT32 and you are using a hub
can you explain what exactly have you tried and provide logs?
I didnt use usb hub,just enable the usb host mode in Nook Tweak app and plug my usb via otg cable.
Sent from my MB508 using XDA App
Then you didn't read good enough the thread or the chart..
You need an external hub ( powered or non-powered ) to work with the sandisk cruzer.
Thanks a lot, i ll order one and try it out.
I tried to connect with my camera but nothing happened,I guess I have to try with usb hub as well
Sent from my MB508 using XDA App

[Q] USB OTG: usb1 found, cannot use keyboard

Hello,
I have a USB OTG cable and dell keyboard that I have tested and work in OTG mode on a Nexus 7, however i cannot get them to function with my HP Touchpad 32gb, running CM9 2.6.35, built on Sun Oct 28.
The device recognizes when I plug in anything via USB, but only as a generic Linux USB hub, and not as any particular device. Are there any steps to take to debug this? Has anyone had experience with this type of an issue?
Thanks for your help,
Cory
I don't know if this is the issue, but I know the touchpad doesn't support OTG like the the Nexus does. I think you need a Y-adapter + OTG to provide power since the micro usb port doesn't give any power to the device you connect. Someone correct me if I'm wrong though.
Apparently even a powered USB requires a powered Y cable to be properly recognized. I hacked together a quick Y cable manually, by splicing in another USB cable's power and ground (Red and black) to the respective locations on a female USB cable. Works as expected.
I am now communicating with an Arduino over Serial
Thanks!
Read this thread, should give you all the info you need:
http://forum.xda-developers.com/showthread.php?t=1582771
Basically the Touchpad has OTG but it provides no power.
wcdolphin said:
Apparently even a powered USB requires a powered Y cable to be properly recognized. I hacked together a quick Y cable manually, by splicing in another USB cable's power and ground (Red and black) to the respective locations on a female USB cable. Works as expected.
I am now communicating with an Arduino over Serial
Thanks!
Click to expand...
Click to collapse
I'm curious if you are able to charge with this cable hack while using usb devices?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
ZedZardoz said:
I'm curious if you are able to charge with this cable hack while using usb devices?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
if so , he is the first of the many many many who has used this cable..HPTP just is not set up for charge + usb data at the same time
amkaos said:
if so , he is the first of the many many many who has used this cable..HPTP just is not set up for charge + usb data at the same time
Click to expand...
Click to collapse
Agreed. I think people just are not stating reality regarding the ability to charge and use OTG Hosting to USB devices at the same time.
My goal here has been to attach a flash drive with video/audio media and play & charge on long flights. It looks like play, charge are mutually exclusive on my beloved TouchPad.
I've asked for the specific confirmation of this from this YouTube but have never had the poster reply:
https://www.youtube.com/watch?v=p10LgZFIawo&feature=BFa&list=PLCED27D4A23068E04&index=7
There are devices out there that have very advanced micro USB device implementations. Sadly the HP is only superficially supportive.
I for one cannot wait to get my SGN2 smart dock which offers:
Charging
OTG (x3 USB)
Audio out
HML HDMI out
Docked Profile

Galaxy tab p1000 and USB Mouse

Hi guys.. i've searched around how to make works usb host on our p1000.. i've tryed several roms and now i've cyanogenmod 9.1.0 since it support usb host and it works with Y cable!
now.. i'm using a self powered usb HUB.. connected to tablet through an usb female to female adaptor and official Samsung data cable.
so.. i've downloaded "Usb Host Controller" app, under "setting" tab i've selected "usb host mode" and now under "USB" tab i can see 2 devices ("1-1 USB2.0 Hub" and "1-1.4 USB2.0 Hub"). When i plug in an usb Stick (2gb) i'm able to mount it and browse through File manager with no issue.. but when i plug on hub an usb mouse.. tablet doesn't recognize it in any way! the mouse optical light turn on and turn off after a few second.. i've tried with two different usb mouse without success!
Any suggestion?
daevoq said:
Hi guys.. i've searched around how to make works usb host on our p1000.. i've tryed several roms and now i've cyanogenmod 9.1.0 since it support usb host and it works with Y cable!
now.. i'm using a self powered usb HUB.. connected to tablet through an usb female to female adaptor and official Samsung data cable.
so.. i've downloaded "Usb Host Controller" app, under "setting" tab i've selected "usb host mode" and now under "USB" tab i can see 2 devices ("1-1 USB2.0 Hub" and "1-1.4 USB2.0 Hub"). When i plug in an usb Stick (2gb) i'm able to mount it and browse through File manager with no issue.. but when i plug on hub an usb mouse.. tablet doesn't recognize it in any way! the mouse optical light turn on and turn off after a few second.. i've tried with two different usb mouse without success!
Any suggestion?
Click to expand...
Click to collapse
Hi sir. Ive been searching with this topic for so long. Im glad that you able to activate usb otg on p1000. May I ask which specific rom and kernel you used. May I have your screenshot of "About Phone" at settings. Thank in advance.
Sent from my GT-I9100 using xda premium
nogo8888 said:
Hi sir. Ive been searching with this topic for so long. Im glad that you able to activate usb otg on p1000. May I ask which specific rom and kernel you used. May I have your screenshot of "About Phone" at settings. Thank in advance.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi.. i'm using official CyanogenMod 9.1 Stable ICS with kernel inside.. nothing special to do.. just download "USB Host Controller".. switch to host mode.. then plug your selfpowered usb hub or an Y-Cable with a power connection, since our tab doesn't provide enough energy from 30-pin port! but only USB Stick work for me.. nothing to do with other devices like mouse or keyboard.. for screenshot i can post it tomorrow!:good:
Hi, are you just using the standard samsung cable? AFAIK, usb otg cable must be used. Anyway I will wait for the screenshot and if possible a photo of your setup. Thanks
Sent from my GT-I9100 using xda premium
daevoq said:
Hi guys.. i've searched around how to make works usb host on our p1000.. i've tryed several roms and now i've cyanogenmod 9.1.0 since it support usb host and it works with Y cable!
now.. i'm using a self powered usb HUB.. connected to tablet through an usb female to female adaptor and official Samsung data cable.
so.. i've downloaded "Usb Host Controller" app, under "setting" tab i've selected "usb host mode" and now under "USB" tab i can see 2 devices ("1-1 USB2.0 Hub" and "1-1.4 USB2.0 Hub"). When i plug in an usb Stick (2gb) i'm able to mount it and browse through File manager with no issue.. but when i plug on hub an usb mouse.. tablet doesn't recognize it in any way! the mouse optical light turn on and turn off after a few second.. i've tried with two different usb mouse without success!
Any suggestion?
Click to expand...
Click to collapse
got mouse and external keyboard working. you may try humberos cm10 latest rom release
Sent from my GT-P1000 using Tapatalk 2
Happy new year 2013 to all.
Greetings from the Philippines
Which exact version are you using to use OTG properly? I tried "sgt7-10.1-20130224-HumberOS-p1" but couldnt use mouse or anything. BTW I am using a Connection Kit with USB and card readers as a OTG device.
Thanks in advance.
nesimi said:
Which exact version are you using to use OTG properly? I tried "sgt7-10.1-20130224-HumberOS-p1" but couldnt use mouse or anything. BTW I am using a Connection Kit with USB and card readers as a OTG device.
Thanks in advance.
Click to expand...
Click to collapse
Do not use usb connection kit. Just use the standard charging/data cable, y cable, 2 usb gender changer and the tab's charger.
Sent from my GT-N7100 using Tapatalk 2
nogo8888 said:
Do not use usb connection kit. Just use the standard charging/data cable, y cable, 2 usb gender changer and the tab's charger.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
I have returned back the conneciton kit and bought USB OTG cable instead. Is it same as Y cable or what? Thanks. I am still trying...
nesimi said:
I have returned back the conneciton kit and bought USB OTG cable instead. Is it same as Y cable or what? Thanks. I am still trying...
Click to expand...
Click to collapse
Do not use usb otg cable as well. Y cable usually comes as accessory when you buy portable hdd.
Kindly see this post.
http://forum.xda-developers.com/showthread.php?p=39692159
Sent from my GT-N7100 using Tapatalk 2
nogo8888 said:
Do not use usb otg cable as well. Y cable usually comes as accessory when you buy portable hdd.
Kindly see this post.
http://forum.xda-developers.com/showthread.php?p=39692159
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
First of all thank you for your answers. Is this the configuration then:
1 Y cable (2 male, 1 female), 1 gender changer (2 female inputs), 1 tablet charger cable (1 30pin input, 1 male USB)
I guess that I should connect 1 male input of Y cable to tablet charger, the other male to gender changer. The remaining input of the gender changer will be connected to Tablet with its charger cable. Female input of the Y cable is left for mouse, USB memory, etc... If this is a true set up, could you please tell me what exact version of Android, kernel, etc you are using. The link of the ROM (CM9, CM10, etc) will be very appreciated.
Thanks again.
Hello @nogo8888
i've read your previous posts that you have experienced using USB OTG with mouse and keyboard functional on your Tab?
I own P-1000 either and already installed the latest ROM from HumberOS (that's the 06-2013 update) and trying to mount my devices such as keyboard and USB mouse, with USB Host Controller (by sztupy) but i have no result.
if you don't mind please kindly help.
Thanks for advance, greetings from Indonesia
hi
the best way for mouse and keyboard use the Bluetooth mouse and keyboard

[Q] Connect USB Device to Nook HD+

So I'm currently running Carbon ROM B6 on my Nook HD+. I was hoping to connect a keyboard via USB to the Nook HD+. In order to do that, I figure I'd have to get a female to female USB adapter, and plug in the keyboard on one side, and the Nook in the other. Before I buy a female to female USB adapter, I figured I'd ask if this would even work. To take it one step further, could this work with any USB device at all, such as a mouse, flash drive, PC Xbox controller, etc?
It works on CM10. I am not sure if Carbon has that feature but USB adapter is only a couple of dollars.
Sent from my Galaxy Nexus using xda app-developers app
And the answer is?
RySean said:
So I'm currently running Carbon ROM B6 on my Nook HD+. I was hoping to connect a keyboard via USB to the Nook HD+. In order to do that, I figure I'd have to get a female to female USB adapter, and plug in the keyboard on one side, and the Nook in the other. Before I buy a female to female USB adapter, I figured I'd ask if this would even work. To take it one step further, could this work with any USB device at all, such as a mouse, flash drive, PC Xbox controller, etc?
Click to expand...
Click to collapse
SOOoo, did this work? Was a long time ago, was wondering if anything came of the attempt. MANY would like to know. Thanks!
Hoverbored said:
SOOoo, did this work? Was a long time ago, was wondering if anything came of the attempt. MANY would like to know. Thanks!
Click to expand...
Click to collapse
Yup, worked fine. I tested a keyboard and a mouse and both worked perfectly. I also tested an external HDD (Seagate Backup Plus) and was able to get that working with USB host mode turned on.
RySean said:
Yup, worked fine. I tested a keyboard and a mouse and both worked perfectly. I also tested an external HDD (Seagate Backup Plus) and was able to get that working with USB host mode turned on.
Click to expand...
Click to collapse
Did you manage to get the 360 controller to work?
Thanks
gotbass said:
Did you manage to get the 360 controller to work?
Thanks
Click to expand...
Click to collapse
For the Xbox Controllers you should be able to use the normal xpad kernel module, I will test that when my USB genderchanger arrives
Jann F said:
For the Xbox Controllers you should be able to use the normal xpad kernel module, I will test that when my USB genderchanger arrives
Click to expand...
Click to collapse
okay let me know how it works! very interested in doing that =)
gotbass said:
okay let me know how it works! very interested in doing that =)
Click to expand...
Click to collapse
as far as I know, those commands like under debian should do it:
Code:
su
modprobe xpad
I will test it as soon as possible
Jann F said:
as far as I know, those commands like under debian should do it:
Code:
su
modprobe xpad
I will test it as soon as possible
Click to expand...
Click to collapse
okay thanks =)
ive purchased a female to female usb adapter, would i not need a powered hub to get the controller working?
gotbass said:
okay thanks =)
ive purchased a female to female usb adapter, would i not need a powered hub to get the controller working?
Click to expand...
Click to collapse
I don't know, that depends on the electrical current it needs and reports to the host controller.
If a device is over that curent, the host controller will turn it off.
So if I buy a female-female adapter and plug in a usb stick I should to be to access the content i.e Movies?
Yes, but you need this apk installed on official cm builds.
http://nook.rootshell.ru/hd/USBHostSwitcher.apk
Jann F said:
Yes, but you need this apk installed on official cm builds.
http://nook.rootshell.ru/hd/USBHostSwitcher.apk
Click to expand...
Click to collapse
Hi
I've downloaded this and tried it but my Nook HD+ doesn't seem to do anything different after I have enabled the program and plugged in a usb stick. I'm running a nightly build of CM11 if that makes any difference.
Then your USB stick needs a too high current, try it with an actively powered USB hub.
Check out http://www.zen24223.zen.co.uk/TPUSBUMount6.apk
The instructions are here http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/
plug in your usb device and "press fix insufficient power req" button. works like a charm for my ps3 controller, no usb hub in between the controller and nook required.

Usb pendrive 64gb for nookhd+

Hi
I am looking for a 64gb usb pendrive to use with the nook hd plus with cyanogenmod installed.
Does anyone have tried any specific model that works?
Any recomendations?
Thanks!
I've used about ten or so different USB drives and so far they have all work... Including my external 1t HD.
I cut the wire on a for port USB hub and put a female USB plug on the one end.
So I can use a thumb drive, keyboard, and mouse all at once.
.
Sent from my Nook HD CM10.2 4.3
RottenEntrailz said:
I've used about ten or so different USB drives and so far they have all work... Including my external 1t HD.
I cut the wire on a for port USB hub and put a female USB plug on the one end.
So I can use a thumb drive, keyboard, and mouse all at once.
.
Sent from my Nook HD CM10.2 4.3
Click to expand...
Click to collapse
This should work? http://www.ebay.com/itm/USB-2-0-F-F...87?pt=LH_DefaultDomain_15&hash=item4d0c513707
extrem0 said:
This should work? http://www.ebay.com/itm/USB-2-0-F-F...87?pt=LH_DefaultDomain_15&hash=item4d0c513707
Click to expand...
Click to collapse
Yes sir.
Thanks.
I have bought this one:
http://www.amazon.com/gp/product/B0...N=B007YXA5SI&linkCode=as2&tag=planetahuevo-20
I will tell you how it works when it arrives.
Thanks
RottenEntrailz said:
I've used about ten or so different USB drives and so far they have all work... Including my external 1t HD.
I cut the wire on a for port USB hub and put a female USB plug on the one end.
So I can use a thumb drive, keyboard, and mouse all at once.
.
Sent from my Nook HD CM10.2 4.3
Click to expand...
Click to collapse
Dude what are the specs on the 1tb hdd, size/maker/partition info, process of setting it up on nook

Categories

Resources