Related
Hi
Kies killed me when I was just trying to update to Froyo officially. Since then I used Odin 1 click and everything seems ok, except for the fact that its att now. I want to eventually get to official rogers 2.2 froyo with no gremlins lurking hidden in the file system. I downloaded the i896 rogers 2.2 rom. How can I install it so that my phone will be stock 2.2? Same boot loader, same rom, same everything as if the update had gone smoothly through kies. I want it to be rogers only.
Well, thanks to all for you help.
And a special thanks to the Kies programmers. I have bricked devices trying to install unofficial things before but I have never bricked a phone through official channels, Amazing work guys amazing.
Thanks to the xda community for again saving my rear
I think if you search there is a Odin for a stock rogers. I will have to look....
Try this thread for rogers stock rom
http://forum.xda-developers.com/showthread.php?t=846501&highlight=odin+rogers
Hi,
more problems. Even though ODIN said it was sucessful it just went to the battery icon. Now the phone shows att logo for a second, reboots and does it again. Not even sure if I can get back to download mode! All this for a friggin official update!
ok I need to calm down. But this is really upsetting
I have a AIO rogers 3.0 tool kit, and I have a stock rogers rom. I do not however know how to get it onto my phone. The odin program just has start.
The rogers AIO program has back up to stock but always says cannot communicate with device.
Please help, I have no idea why things have been so messed up.
same happen to a friens of mine that wanted to flash unleashthebeast...and he changed his mine after and i odin one clicked and it did the same...luckily he was under 30 days...but only other option is a jig.
Evilspawn said:
same happen to a friens of mine that wanted to flash unleashthebeast...and he changed his mine after and i odin one clicked and it did the same...luckily he was under 30 days...but only other option is a jig.
Click to expand...
Click to collapse
oh and if u can get into download mode your good....if not...a jig
Seriously?
The only way to recover this phone is to make some crazy usb solder jiggy?
My phone shows only ATT or if USB is plugged in, a battery icon. No button combo is working for DL mode, where as it was before.
Any ideas on how else I could get this phone into dl mode?
Thanks again
Chris
Looks like you and I have a similar issue. Subbing to thread for hope.
What about using the AIO toolkit to at least get a working ATT branded phone? I too used the AIO toolkit to flash a custom rom on my Rogers phone and yes, though I don't believe it was supposed to the AIO toolkit put the ATT stock on rather than Rogers stock. However, at least you'd have a working phone at that point. Unless you need to return your phone you can use it as is until you find a proper solution.
I know it's a stopgap solution but working improperly is better than not working at all.
Christopher888 said:
Seriously?
The only way to recover this phone is to make some crazy usb solder jiggy?
My phone shows only ATT or if USB is plugged in, a battery icon. No button combo is working for DL mode, where as it was before.
Any ideas on how else I could get this phone into dl mode?
Thanks again
Chris
Click to expand...
Click to collapse
Built a jig this morning, phone went into download mode with a quickness. .99cents at radio shack some duct tape, and a steady hand.
Stocks
http://forum.xda-developers.com/showthread.php?t=905042
ATT bootscreen problem
http://forum.xda-developers.com/showpost.php?p=11327700&postcount=209
in case some of those guys confused you, a jig only helps you if you cant get into download mode. you already flashed successfully after the brick, right? you dont need a jig. follow the instuctions above.
if you get AIO toolkit working (rogers edition) DONT USE A PIT FILE, DONT RE-PARTITION, (pit file is for partitioning). the rogers stock images dont have dbdata to work after repartition. this is what screwed me the other day., and i was forced to use ODIN1 Click. and now have the same ATT bootscreen as you.
as im in the same boat ive been researching and the above method wont work. its only for i9000 based roms. not the stock based roms like the att. and the fix replaces a file named logo_ATNT.jpg (AT&T)
this *fix* isnt too much of a *fix* and i have yet to come across a rogers flash that will replace this att crap.
So that means if we were to return our captivates for a refund, we're stuck with the split second AT&T boot logo. I wonder if they'll mind...
if your phone breaks to the point that you must return it, *MAKE SURE* its broken enough that they cant read/use the phone. Sticking it to the back of a speaker magnet for 10 minutes should do. ive heard of using a microwave fore a few seconds but it may do visible damage.
Hey there, i am feeling somewhat overwhelmed with all of the advice going on out there and need someone who can give me the answer to my specific problem hardware wise without breaking a sweat...
I flashed a froyo 2.2 rom onto my phone a while ago, recently all of my apps stopped working, and i could no longer install any apps.
Couple days ago i tried openning gmail and the screen went black and gave me the bzzzzzz...............................bzzz...bzzz...
vibrating error that you usually get when an app crashes.
Now the phone continues doing that even when booted up and stuff
It starts right after the S screen and repeats until the battery is removed.
My phone can't get into download or reset mode using the 3 button method so i bought a jig off of ebay, works like a charm.
however NOW, i cannot get the computer to see the phone; both when it is on and attached and in download mode and attached. Odin can't see it, neither can Kies.
If i can get either to see it, i can look up the flashing process to make sure everything is right.... but as of yet nothing i am doing is making a difference.
Thanks for any help
Ok, I'd focus on odin so disable Kies (in task manager processes - all the kies processes).
Then I would 1) reinstall the drivers (standalone ones) 2) Have a few versions of odin to try (like 1.3, 1.7 and ez odin) 3) Clean your usb port on the phone (and computer maybe too - whats the harm?).
Usually if you are sure the drivers are Ok then you should be able to odin working with a nice clean port. They are more sensitive to dirt/moisture or whatever than they should be.
Try that and let us know...
BTW Some people think that the order is important but I've never noticed that. I always have odin open and then connect it but cant hurt to try the other way around too.
Hey thanks alot,
I am at work right now but i am optimistic about trying that out lol.
Just so i know for when the time comes and if Odin works, what files do i need to flash it? .pit, .tar and anything else specific for Bell Canada?
I only ask because you are with Bell so it is probably a very simple answer for you. Otherwise I am sure i can find it elsewhere.
Thanks,
I'll keep you updated
Josh
Download the complete jl2 rom from link I posted yesterday (search my posts) with repartition ticked, then flash the kc1 rom from stock rom link on xda or at samfirmware.com and flash without repartition if you want the latest. You could just try the kc1 step but I you need to repartition.
Sent from my GT-I9000M using XDA Premium App
Hey man,
my phone has never been sent in for repairs or replaced...
I was reading one of your other posts and you advised another member to send it in and maybe they will replace/update hardware?
I have still had my phone for less than a year so sending it in will be no problem at all...
Should i flash to the latest myself or return to stock and send it in?
I really appreciate your help.
Thanks
Well he knows his is broken as he can see that his internal memory reads 0 (which means its cooked - ask me how I know...) and he was trying to fix it in a round about way. Or there was the guy who flashed a captivate rom - that was just a big no-no.
You might just have a corrupt partition or some other corruption in the file system. I seem to get that all the time and its a pain but very fixable .
Alright, sooo
-uninstall Kies
-install drivers only
-try to connect to Odin
-If succesful flash with Odin
-dance with joy
Got it, I will update you later when i get home.
Thanks
installed drivers on my work computer (32 bit windows xp) and nothing... I've tried phone off, phone on, phone in d/l mode... It doesn't pick up anything...
I can try it on my Windows 7 comp at home and see if that works but i'm wondering what the worst case scenario is just bringing into Bell and having them fix it... Am i looking at charges, warranty voiding, etc.. etc... to have it fixed or could i BS my way out of it?
Fuuuuuuuuuuuuuuuuuu
pretty sure i flashed the wrong firmware on my phone, when it boots up it says GT-I9000 not GT-I9000M.
It worked fine for like 6 months so i never questioned it... damn damn damn
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
I9000 firmware is completely compatible. The text you see is from the kernel which are always for i9000 unless you have one of the three bell firmwares. So that's not the issue.
Sent from my GT-I9000M using XDA Premium App
RogueCow27 said:
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
Click to expand...
Click to collapse
I would keep trying. I have gotten warranty before and I was in the same predicament as you almost except I knew that the internal memory was dead. But that was also around the time when most of the I9000M models were dying. They might be checking more now.
If you get odin to flash a stock rom then you can go for it but by then you should be able to fix it.
Sent from my GT-I9000M using XDA Premium App
Alright i will keep trying.
As far as the firmware goes, my gf and i both have the same phone, but she kept heres official and i put custom roms on mine (just the 2.2 because it wasn't available)
We are both on bell canada so i asked her to boot up her phone and the beginning message on hers says GT-I9000M so it freaked me out lol
I will try on my home computer,
keep your fingers crossed for me
Alright, so Odin can now see my phone (it was the damn cord, my Win 7 comp couldnt see it but my xp work laptop can)
Which firmware would you recomend flashing? Stock gingerbread or a slight variation?
I am at work right now so i can wait a bit for a good response. It'd really help me out if you could provide links and tips to the best firmware out right now (i have no problem flashing a custom ROM if it is good).
Thanks alot,
Josh
Succesfully Flashes Gingerbread 2.3.4
Thanks for all your help!!!
how did you manage to see it in odin?
i have te same problem with restarting just after first screen (after flashing to gingerbread) but i cant see it in odin so i cant flash it again?
when i connect it when turned off, a small icon appears with usb connected sound but its still not visible.
Is it maybe my win7?
help, anyone please
Did you start in Download mod? Did you kill the Kies processes in you Win7 task manager ?
If yes, sometimes Windows takes time to install the drivers (be sure ton be connected to the internet), you should also close and relaunch Odin.
i launched download mode with sdk, and now i cant start it.
i went to another pc with xp. it installs drivers but odin cant recognize it.
Well i did it on my work XP computer becuase WIN 7 wasn't recognizing it. But it turns out the whole time the cable i was using would connect to charge, but not act as a pc connection.
Ok I have a stock KB2 Cappy. I used Odin to flash back to 2.1 KB1 JF6
Then I used Odin 3 to flash a kernel so I can put on CM7. I am now stuck in the Boot screen.
I have no 3 button, I cannot get into download mode (my jig is homemade should i order one?)
I tried to change usb and remove the sim card to try odin again to get back into stock.
Nothing seems to work the only thing is my jig is not good either for DL Mode. I want to get back to stock so any suggestions. I tried heimandall did not work either.
I am really stuck on this galaxy s I897 screen.
Is the jig soldered? If its not make sure you are connecting the correct pins and use some black tape or something to isolate your fingers from the resistors (might screw up the actual ohms making it to boot up normally and not in to dl mode.
The bootloop was expected, you are supposed to check that you have a working button combo both before you flash the kernel (because it will bootloop and you boot into recovery and flash whatever) and before you ever flash cm7 because that is the only way to get into download mode besides a jig on aosp roms.
so, fiddle around with your jig some more and if you get it in download mode just flash the captivate gingerbread bootloaders, that will fix your button combo and allow you to proceed flashing cm7.
Hi Guys,
I have a similar problem. I am a total noob-I've had my I896 cappy (Canadian Rogers based) for about a year now; i fiddled with it on Saturday and also got the bootloop. I freaked out, and managed to further flash (out of frustration and confusion) the cappy with another wrong ROM, the I900. I managed to get it back into DL mode and tried flashing stock eclair or 2.2 froyo via ODIN. For some reason, whenever I start the flash (press start on Odin with the froyo 2.2 file on PDA), the progress fails at the factory section. I don't know much about jigs yet, but any tips would be greatly appreciated.
thanks
Chord in the back of the PC directly attached to the motherboard NO EXTERNAL HUBS, right click on Odin run as admin.
Once you have it working READ AND UNDERSTAND WHAT YOU'RE DOING, BEFORE DOING ANYTHING ELSE TO YOUR PHONE
This is probably the easiest guide on how to make one. Layman Jig First one I did I butchered a pare car charger to make it. You can just grab one from MobileTechVideos.com for about $8.
AlphaJ1 said:
Hi Guys,
I have a similar problem. I am a total noob-I've had my I896 cappy (Canadian Rogers based) for about a year now; i fiddled with it on Saturday and also got the bootloop. I freaked out, and managed to further flash (out of frustration and confusion) the cappy with another wrong ROM, the I900. I managed to get it back into DL mode and tried flashing stock eclair or 2.2 froyo via ODIN. For some reason, whenever I start the flash (press start on Odin with the froyo 2.2 file on PDA), the progress fails at the factory section. I don't know much about jigs yet, but any tips would be greatly appreciated.
thanks
Click to expand...
Click to collapse
Hi guys,
Thanks for the link.
From what I understand, a jig is an improvised connection that allows your phone to go into DL mode. What if my phone is still capable of going into DL mode? My apologies, as I am at work.
Im not sure what you mean with your question. What the jig does is give the signal for it to go to download mode as was intended by samsung. Same theory on how your phone knows its connected to your computer, or the wall or the car charger. Its by manipulating the current between 2 pins. Keep in mind your phone should always be capable of going in to download mode assuming the hardware is working and your bootloaders are in working order.
I believe I read it on a different website that as long as your phone can go into download mode, then it is only "soft-bricked," meaning it can still be recovered using ODIN. I don't know If I was misinformed or not. I guess my question is, since my phone is still able to go into download mode, but the flash is still failing, did I DL the wrong ROM, or was the copy of Froyo 2.2 I DL'd corrupt? If so, is there a reliable source/site where I can download Froyo or Eclair?
I hope that makes more sense.
Read my post after yours...
studacris said:
Chord in the back of the PC directly attached to the motherboard NO EXTERNAL HUBS, right click on Odin run as admin.
Once you have it working READ AND UNDERSTAND WHAT YOU'RE DOING, BEFORE DOING ANYTHING ELSE TO YOUR PHONE
Click to expand...
Click to collapse
^What he said. If that fails could be a faulty cable.
AlphaJ1 said:
I believe I read it on a different website that as long as your phone can go into download mode, then it is only "soft-bricked," meaning it can still be recovered using ODIN. I don't know If I was misinformed or not. I guess my question is, since my phone is still able to go into download mode, but the flash is still failing, did I DL the wrong ROM, or was the copy of Froyo 2.2 I DL'd corrupt? If so, is there a reliable source/site where I can download Froyo or Eclair?
I hope that makes more sense.
Click to expand...
Click to collapse
You are correct, if you can get into download mode you are not bricked. Make sure you are using the usb cord that came with your phone, plugged directly into the back of your computer. Make sure your SIM card is out, you're logged in as an administrator, and that you start odin before you plug your phone in.
If it still doesn't work, try another computer and/or another cord.
Why do people say take sim out? Ive never taken it out and had no issues. Just curious.
That is a practice from way back in the winmo days, sometimes the flash would corrupt the Sim itself. Not the case anymore for the most part. I'm with you never take mine out either.
Thanks guys, I will try this at home; hopefully it works.
prbassplayer said:
Why do people say take sim out? Ive never taken it out and had no issues. Just curious.
Click to expand...
Click to collapse
I say it because, while I've never had it screw up the SIM itself, I had a situation where I forgot to remove it and then couldn't get odin to complete a flash on several attempts, resulting in a soft brick that I couldn't flash out of. As soon as I removed the sim, Odin flashed without an issue.
Coincidence? Maybe, although I didn't change anything else. If it possibly keeps me from repeating this terrifying event, though, I'll just keep doing it
apbthe3 said:
I say it because, while I've never had it screw up the SIM itself, I had a situation where I forgot to remove it and then couldn't get odin to complete a flash on several attempts, resulting in a soft brick that I couldn't flash out of. As soon as I removed the sim, Odin flashed without an issue.
Coincidence? Maybe, although I didn't change anything else. If it possibly keeps me from repeating this terrifying event, though, I'll just keep doing it
Click to expand...
Click to collapse
Did you get a red "FAIL" message on ODIN? Because thats what I got several times. My buddy also tried and he got the same thing. The green progress bar completes up till about 80 percent and gives up on me. I'll try taking out the SD and SIM cards when I get home, hopefully it works.
Hi guys, little update:
I found this on the forums and used it:
http://forum.xda-developers.com/showthread.php?t=731989
Anyways, this worked after my second try. Interestingly enough, it worked once i removed the Sim card, which is what apbthe3 suggested..great! I'm just glad my phone is no longer bricked. Minor issue though, my phone is now an AT&T phone, but unfortunately, I am a Canadian Samsung user. New problem now. My phone is no longer rooted (never was actually, but was bricked in the process), I'm happy it works, but i need to know if there are any Canadians out there that know how to revert my device back to Rogers.
Any help would be great. Anyways, the link I provided works great, so its a great resource for our American friends.
Why don't you look at Cognition 4.x.x? Froyo stock ish looking rom tweaked out the ass very fast. Good rom.
Look in development. There are a couple of threads there just for Rogers users.
Hi everyone,
I have in the past switched roms on my Galaxy S before, therefore the issue of bricking my phone is something that doesn't intimidate me too much. However, this time i'm really stumped, and I turn to the gurus here at the forums, hoping a solution can be found.
I had just gotten my phone back from getting its screen repaired (which makes this especially irritating), and my carriers had flashed my phone back to their stock version of android, meaning gingerbread with a lot of bloatware. I decided straight away that I wanted to root my phone today, although I was away from my PC. I had my laptop with me (Macbook Air), but I had never done any flashing from it before, not to mention ever using Heimdall before (I had always flashed with Odin). I downloaded everything, and then I made my first mistake: I flashed a speed mod kernel (I believe it was a froyo kernel), and after reboot my phone wouldn't go past the splash screen. I could still get into recovery and download mode. Then I decided to try playing it safe, and I downloaded stock firmware packages for Heimdall fro the forums here. I tried flashing JVS on my phone, going exactly by the instructions written in that same thread that I found the packages, but the flash didn't succeed. Instead, I got an error message saying the PIT file didn't reach the end of the transfer (or something like that...) and the phone rebooted. After that attempt, the phone went black. Nothing works anymore except for download mode. Now I thought that as long as download mode works, I'll be ok, so I tried flashing different packages through Heimdall, and eventually when I got home I tried using Odin on my PC. The problem is, my PC doesn't recognize my phone anymore (even though the drivers are installed and I never had an issue with that before), so I'm pretty much stuck with a brick for now.
I really don't want to go back to my carrier again, and hope to get my phone back in working order without paying too much. I still think there's hope as long as download mode works.
Does anybody have any suggestions what I might be able to do? Since my PC doesn't recognize my phone (and therefore Odin doesn't either), the only semi-working option left is using Heimdall somehow, but as to how to use it, I'm in the dark.
I would really appreciate any help you guys can give me. Thanks a lot!
Aaron
first try reinstalling the drivers and try again. if you can get download mode, should be repaired.
Thank you very much!!!
I knew that download mode was a good sign, but I started freaking out as soon as Odin wouldn't recognize my phone, since it never has had that problem. Reinstalling the drivers did the trick, and flashing worked.
Sometimes the simplest solution is the best. Again, thanks a lot!
commandozzz said:
Thank you very much!!!
I knew that download mode was a good sign, but I started freaking out as soon as Odin wouldn't recognize my phone, since it never has had that problem. Reinstalling the drivers did the trick, and flashing worked.
Sometimes the simplest solution is the best. Again, thanks a lot!
Click to expand...
Click to collapse
We are here to help.
hey guys i have a captivate that i tried flashing and was successful then i tried again and the screen went black. im not sure if my battery died during the process or what but idk what to do. I cant get into recovery mode, i can only get into downloading mode but none of the odin's ive downloaded have recognized my device today. they worked fine yesterday. then i tried "hemidall one click" to try and get it back to stock but no luck. also when i try to power on I get the "Cornkernel" loading screen since that was the kernel i had loaded when it was working, but it fills the bar then shuts off. so it seems like im going to be at the mercy of a computer program since i am unable to access anything on the phone, right? I recently upgraded to gingerbread before all of the flashing of the new roms. all i want is to get back to either froyo or gingerbread, i dont really care, heck ill even take 2.1 at this point. if anyone knows whats going on and can help me thatd be great.
Thanks
Remember to use a rear usb hub for destop and run as admin. Heimdall will mess up your odin drivers.
You may also want to check out the captivate connection issues thread.
Also, to clarify further on prbassplayer's point about Heimdall, it will write its drivers over the drivers assigned to the USB port you are plugged into when it detects your phone. So if you have 4 USB ports and you use port 3 for Heimdall, it would look like this:
1 - Odin port
2 - Odin port
3 - Heimdall port
4 - Odin port
All this means is that you'll need to be aware of the port you used with Heimdall, or just reinstall the odin drivers (they'll overwrite the Heimdall setup).
OK so i tried what you mentioned in that thread on the connection issue and unfortunately it didn't work. is there a way i could start fresh? like delete all the drivers from my computer and then try it again, or do u not think that would work? im open to any ideas/suggestions right now because i hate having an extra paperweight and the thought of buying a new phone.
Don't know if this'll help or even why it worked for me but, when I had problems with odin recognizing my phone, I reinstalled/repaired samsung kies and odin would work for at least one flash.
Note: used full odin (not oneclick)
Good luck
hey guys thanks a bunch i finally got it to work. i had to use a different computer like you said. What a great feeling to have a functional phone again..
Thanks Again!!
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
blackjack54 said:
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
Click to expand...
Click to collapse
Kies sucks lol
look at my sig the first "go to" has the One Click Odin file to get you to stock and rooted 2.3 ...should take no more then 5 mins to do it
the link on that page for the 1 click odin doesnt work.
Try looking >>HERE<<. There are more one clicks there than you will ever need (hopefully)
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
blackjack54 said:
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
Click to expand...
Click to collapse
if you have never flashed GB bootloaders, you need to. Just oonce will work from that time forward. After you flash bootloaders, it's best to avoid them. A bad bootloader flash is one of the few things that will turn a Captivate into a paperwight. About which GB to use, I would say KK4. Its the same as the Official KK4 that was released. So to recap, flash bootloaders only once, then use no bootloader packages after that.
Im not sure if I unlocked them or not honestly. I know i had the phone rooted at one point and was running Cerberus rom. is there any way for me to check?
If you don't know, flash them.
ok i apologize in advance if this is a stupid obvious question..i got the odin one click and i was looking at the page u referred to me to and im wondering what the kernel is for? you cant place it in the odin one click obviously so is that just to keep things together or do i actually need it?
The kernel links are just to use if you want to root the stock rom. You have to use full Odin for those. Stick with the one click until you feel more comfortable in flashing AND do a lot research before your next flash.
so i got the KK1 gingerbread working and everything seems to work fine but now my data doesnt work. So I cant get ATT 3g or edge or anything the only internet i recieve is wifi. anyone know why this is? or how to fix it. ive tried a reboot and nothing ive tried changing the settings under network settings.