Related
Whenver I'm charging via wall charger or USB my captivate is super duper SLOOOWWW. It takes forever to switch screens, the keyboard doesn't function correctly, and my bluetooth won't sync. As soon as I disconnect the charge everything is back to normal.
Any ideas?
No replies? Sooo...Am I the ONLY one?
be patient for answers here
Ive noticed it charges slowly but I have not noticed it being slow while charging.
The theoretical output of the charger is .7 amps, and thats not very much in the smartphone world these days. When I am using it and it is plugged in, it charges roughly a percent every eight minutes. The .7 amps must be just enough to cover the phone being on and in use.
I am currently looking around for chargers in the 1 amp range. My old tilt 2 charger works great for that and i definitely saw a charge time improvement. I would love to have one with a greater than 1amp output but I dont think you can find them anywhere
Are you running SetCPU with set profiles ?
If Yes : that is the problem , adjust profile.
If Not : must be something else, not a common behavior.
I read this on another forum but someone mentioned changing the default usb setting from Kies to something something else may help.
Sent from my Galaxy S using XDA App
matthewpapa said:
I am currently looking around for chargers in the 1 amp range. My old tilt 2 charger works great for that and i definitely saw a charge time improvement. I would love to have one with a greater than 1amp output but I dont think you can find them anywhere
Click to expand...
Click to collapse
Ordered these the other day. Just combine them with a USB cable.
http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10826&cs_id=1082602&p_id=3523&seq=1&format=2
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10311&cs_id=1031106&p_id=6767&seq=1&format=2
ladiesgod said:
No replies? Sooo...Am I the ONLY one?
Click to expand...
Click to collapse
No, mine doesnt do that. It runs the same whether its plugged into the wall charger or not.
derek4484 said:
No, mine doesnt do that. It runs the same whether its plugged into the wall charger or not.
Click to expand...
Click to collapse
same, get your phone replaced whole you still can
Jack45 said:
Ordered these the other day. Just combine them with a USB cable.
http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10826&cs_id=1082602&p_id=3523&seq=1&format=2
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10311&cs_id=1031106&p_id=6767&seq=1&format=2
Click to expand...
Click to collapse
if u had an iphone charger can we use that , that has 1A rating too ?
anilkuj said:
if u had an iphone charger can we use that , that has 1A rating too ?
Click to expand...
Click to collapse
As long as the output is 5 volts, you're o.k.
My captivate runs the same while charging but the actual process of charging the phone takes forever it seems. I've only had it a couple days now and I have to get used to killing some tasks while charging because I actually think the battery life was decreasing as it charged.
Incidentally, the display is the real killer on the battery...most tasks don't really eat as much battery life in comparison.
Recent Nokia chargers will work with a slight mod to the plug where it fits the phone,
After Pimping out my phone it works fine while charging now. Yea screen eats up like 82% of batteries resources...OUCH!
Just search for Motorola P513 on Amazon. Rapid rate car charger! And, belive me, it's perfect fit! Now on sale for $5.85 (was $29.99).
Sent from my SAMSUNG-SGH-I897 using XDA App
I agree with the device charging slowly (but then again it doesn't help that I'm using it while it charges) but I have not had any performance issues.
Sent from my Samsung Galaxy S
for those of you who have a old iphone/ipod touch charger block, use that instead.
its rated for 5V/1A output, higher than the 5V/.7A output on the default samsung charging block.
that should charge the phone much faster
I have the same issue with charging, no matter what charger I use (iPhone, Tilt, USB), it's all VERY painfully slow. I've been as high as 1% per 6 minutes (rare - when using Nokia charger (1.2A I believe) to 1% per 13 minutes via USB.
I'm thinking it might be something internal to the actual phone. The iPhone didn't take this long even with USB charging through a computer or LCD monitor. Heck, the iPhone on average was 90 seconds per 1% of battery. I could have a nearly dead phone and be fully charged and ready in less than an hour and a half.
Anyone else think the same?
yea i think it might be something related to the phone indeed. this is, in my opinion, the biggest problem. i'm always on the go and i depend on my phone so much that if it doesn't charge fast enough i'm screwed.
let me make a post in the galaxy s forum and see if there's battery charging problems
Everyone else is charging.
littleasian said:
yea i think it might be something related to the phone indeed. this is, in my opinion, the biggest problem. i'm always on the go and i depend on my phone so much that if it doesn't charge fast enough i'm screwed.
let me make a post in the galaxy s forum and see if there's battery charging problems
Click to expand...
Click to collapse
which thread is that? I'm curious to track that one as well. I have gotten 4 other people to purchase the Captivate from the iPhone and we are all on the same boat..even with a 1.2A charger from my N97 (which only lasted 3 weeks with me...but can't wait for the N8), it takes about 4 hours to charge the battery...something's wrong there. It shouldn't take less to drain the battery than to charge it!
I've had the Droid 3 for about 10 days now, and I've been encountering an intermittent problem with charging the phone.
Last night, I plugged in my phone so that it would charge overnight. I made sure that the connections to both the phone and the outlet were firm, and upon plugging it in, my phone's battery icon and lock screen both indicated that it was charging. However, when I woke up this morning, I discovered that the battery had actually continued to discharge overnight. Despite this, the battery icon and lock screen both continued to say that the battery was charging.
I've run into this problem three times this past week. It's entirely possible that I just have a defective device, but I wanted to check and make sure that nobody else was experiencing this issue before taking it back to Verizon.
Check the task manager for programs using lots of cpu. I've found that using google maps nav in the car dock while charging still in fact uses more power than it could charge. Your issue is with the screen off though so check for background apps.
Sent from my DROID3 using XDA App
I have had this problem 2 times and I have had the phone for about the same time. I plugged it in at like 40% watched a movie screen never came on till the movie was over I looked at my screen and the battery was at 11%. I was thinking maybe just a bad connection untill I looked at the notification bar and it said it was charging!
I just got my Droid 3 yesterday and last night, the first night of use, it did the same thing. Even if I go into battery usage and look at the graph it'll say charging but the power level will be going down. Very frustrating.
A Verizon rep I spoke with recommended trying a different charger. Sounds reasonable enough, so I'll give that a shot and post back after a few nights of use.
What is the current rating of the chargers you guys are using? (i.e. 850 mA, 1 A, etc). A good rule of thumb is not use anything less than 1 A (1000 mA).
The Motorola-supplied charger is 850mA.
RandomEncounter said:
A Verizon rep I spoke with recommended trying a different charger. Sounds reasonable enough, so I'll give that a shot and post back after a few nights of use.
Click to expand...
Click to collapse
This sounds logical. I had this same problem two phones that happened to have a slide-out keyboard (Shift, G2) and the problem vanished when I used a different charger. I just read today that 100s of people were having this problem today in a news feed.
I was having the issue too, so I used a 2A charger that came with my Huawei tablet...no more issues! (Charge time is about 1.5 hours too!)
pplude said:
I was having the issue too, so I used a 2A charger that came with my Huawei tablet...no more issues! (Charge time is about 1.5 hours too!)
Click to expand...
Click to collapse
I'd be careful about using higher amperage chargers. Don't want to be burning out the charging circuitry. Not saying you will.. just be careful using a charger not designed specifically for the device.
Apparently the new Moto LiPo batteries have another level of overcharge protection. To be safe, I'm going to use an ohm-meter about once a week or so to check the internal contacts (a higher ohm rating would suggest damage).
pplude said:
Apparently the new Moto LiPo batteries have another level of overcharge protection. To be safe, I'm going to use an ohm-meter about once a week or so to check the internal contacts (a higher ohm rating would suggest damage).
Click to expand...
Click to collapse
Good to know. I found one of those chargers for $6, I'm considering getting one now.
http://www.bargaincell.com/huaweiid...e-p-509461.html?cPath=58893_59091_59092_59093
elkay said:
Good to know. I found one of those chargers for $6, I'm considering getting one now.
http://www.bargaincell.com/huaweiid...e-p-509461.html?cPath=58893_59091_59092_59093
Click to expand...
Click to collapse
That's not the one I have, I'm using the USB-output charger from the S7 SLIM, then the Moto supplied USB cable.
Well, it's been a few days, and I haven't experienced the problem since switching to a different charger. Granted, the problem was intermittent, so it's difficult to know for certain if the charger was in fact the issue, but I'm content with this solution.
I've been using my iPad's 5.1V 2.1A charger without issues for a few days. It charges the extended battery from 10% to full in a little over an hour.
That's the dual-core proc for ya. Wonder why the Xoom uses a proprietary charger? dual-core devices nom battery.
Jewremy said:
That's the dual-core proc for ya. Wonder why the Xoom uses a proprietary charger? dual-core devices nom battery.
Click to expand...
Click to collapse
No? Dual core is more efficient, it shuts down one of the processors when it's not in use. Dual core means nothing about power efficiency. As a matter of fact, it can have an advantage. Each core uses less power, and combined, they can use less power than a similarly powerful chipset.
I've also run into some issues on my 5 day old Droid 3. It seems to be when disconnected from the charger. I have two regular Moto chargers for this, and tried a 1A HTC charger, which this thing will not charge from.
I tried using different micro USB cables, which didn't help, either. I was trying to move the phone around while charging, and seemed to encounter the issue. Either it's a connector issue for the mUSB, or the (especially short and stiff) charging cables have broken conductors inside, and we're getting a bad batch of cords.
Possibly the D3 has its own issue with charging, but I didn't have a problem until this morning. regular mUSB cords won't work for me at all, as I've tried all I have.
Given this issue, I'm wondering how widespread this is, and if it's something to take the phone back for. I took me a few hours (over 3) of waiting and fiddling with it, but it's at least charging now.
I had this issue to. I used a different charger and cord to charge my phone at night woke up the next day no charge. I went to work pluged in to my wall charger and still no charge. I did a factory reset thinking that might work but it did not. I was going to take it to a verizon store after work so on the way there I pluged in to my car charger an it started to charge so I skipped the store. When I got home I used a different cord and wall charger and it also worked. I did notice that when I plugged in the night before that a small little white light was lit up for a second in between the charging port and hdmi. I know there is a light there but never seen it light up before. So maybe that was behind all of this. Not had a problem sense.
Sent from my DROID3 using XDA App
The amperage you see stated PS units has no effect on your phone. That's not how many amps leaves the unit to charge your battery. That's how much the PS unit can handle as a draw. In reality the reason the stock ones are only 850 only means that the manufacture used spec parts for the PS unit. i would think that Motorola's minimum spec was 850 and so that's what the PS units manufacture used.
The higher the number means nothing other than you can bet the 1AMP one is going to out last the 850.
Of course the last statement is highly speculative because i have no idea what the amp rating for the phone is. But what i do know is that all the parts are made in china and you can bet they are not going to overbuild anything.
If the amp range is 675-832, which is the number I would expect then if the phone draws more than 850 for an extended period of time the units internal fuse could blow. Unless of course you purchased a third party unit that has an external fuse. Then you can jsut replace the fuse and not have to worry about going out to buy Chinese garbage. lolz
but then again i bet this Droid 3 is made in china, oh well. I like it anyway
My Nexus 7's battery was dead at arrival. I'm trying to charge it up now and it's MOVING SO SLOW?
Am i the only one?
Also I tried charging with my phone's microusb cord (cuz it's WAY longer) and it wasn't charging at all? Did anybody have any luck using NON-OEM usb cords?
Its probably the cord. The Nexus 7 charger is 5 volts 2 AMPS which is higher than the usual 1 amp chargers. Just wait and see
Sent from my i777 using xda app-developers app
Mine seemed to be charging very slowly, too. On the other hand, it also drains very slowly!
What everyone else is saying plus it will go quicker after a few initial charges.
Sent from my Nexus 7 using Tapatalk 2
Bigger gas tank takes longer to fill.
Sent from my Nexus 7 using Tapatalk 2
The initial charge for me took forever... Like 7 hours almost to fully charge.
The second time I charged it, from about 40% it only took like 2 hours to fully charge
Sent from my HTC Incredible S using Tapatalk 2
Nexus 7 is apparently very finicky regarding what chargers and what cables will do the job - some of mine work (e.g. $4.74 Motorola http://www.amazon.com/gp/product/B004EYSKM8/ref=oh_details_o05_s00_i00 ) some don't (Griffin iPad charger for instance, which is a powerful charger and works for Everything else I've tried)
Along the same lines, if you have it attached to a generic car charger and are using it for GPS, the charger barely keeps up with power use.
Yes it charges slowly. Yes you have to use the charger that came with the unit.
jskahan846 said:
Along the same lines, if you have it attached to a generic car charger and are using it for GPS, the charger barely keeps up with power use.
Click to expand...
Click to collapse
That's better then my SGS2 phone. I had about 20% left on it, but needed to use it as a GPS on a business trip. Plugged it into a car charger, and loaded up Navigation. The phone indicated charging, but the battery level kept dropping (albeit a little slower). By the time we got to our destination (~30mins away) I only had 7% left.
Crazy.
Would the Nexus 7 charger be OK with my Galaxy Nexus or will there be issues? I don't need two chargers at the same time.
Rik.
Sent from my Nexus 7 using Tapatalk 2
aindow said:
Would the Nexus 7 charger be OK with my Galaxy Nexus or will there be issues? I don't need two chargers at the same time.
Rik.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I charged my Gnex with the N7 charger two nights ago, had no issues but i don't know if it is safe.
As long as the voltages are the same, and the amps are = or > than what the device needs, you should be OK. The device will only pull the amperage it needs. Voltage is what needs to be the exact (but I don't think this matter over USB, since it's all 5v - matters more with generic A/C adapters). If you don't have enough amps, it could result in slow/failed charging, but too much doesn't matter.
It seems to picky with cables. I also used a longer USB I had lying around. I left it charging for 30 minutes. I came back and it only went up 1% I switched back to the cable that came with it and it started to charge it normally.
I'm not sure why its happening but its weird
Sent from my Nexus 7 using xda premium
tricky
The nexus 7 need "compatible" usb cables, i have one that is working great and it's for usb charging only, no data .
The nexus 7 battery is 4325 Mah so a 2Amp charger will charge the battery in a little more than 2 hours (calculate the 325mah over and add the standby battery discharging when you charge it while at ON)
So the tips are:
1. Find a good 2Amp usb charger
2. Find a compatible cable, try some no data cable or maybe usb3 or again try, try try...
Awesome Tablet
I picked up a 6 ft generic Micro USB cable from Amazon for around $2, and I've been using it to charge my Nexus 7 virtually since I bought it after it launched on the Google Play store, because it's much longer than the OEM Asus cord.
The problem though, it was hard to plug in, so I filed down the bumps [on the bottom of the connector, or, on the Nexus 7, the side facing you when you plug it in--because the N7's micro usb port is up side down ] a tad bit too much so now it's a little to lose. So sometimes when I adb into it, and move it a little bit, it will lose the PC connection [but never the charging connection] intermittently.
Also, it charges fine, except when I'm playing MC3, or Bad Piggies HD. With those apps, it will say Charging, but will actually slowly discharge [slower than on battery, so apparently there's not enough power to tread water, and it sinks slightly]. It's plays HD 720P mkv files fine [with MxPlayer], and stays fully charged at 100%.
Same thing here
thevuman said:
The initial charge for me took forever... Like 7 hours almost to fully charge.
The second time I charged it, from about 40% it only took like 2 hours to fully charge
Sent from my HTC Incredible S using Tapatalk 2
Click to expand...
Click to collapse
My nexus takes about 7-8 hours to charge, and thats using the original charger that it came with. Used it now for a week without any improvement. Also my battery time with lowest backlight, gps off and so on is around 4-5 hours which feels abit low. wtf is going on?
Any usb charger should work.
The problem is the charge controler IC in the N7, it is REALLY picky with voltages.
My N7 OEM cord is a much heavier gauge then my NS or GN cord, on top of that the NS and GN cords are twice the length.
We had a really long thread on G+ about this, we even figured out the observer effect was screwing us when we had an ammeter on it.
TL;DR:
If the cord is too long or not heavy enough the N7 only pulls like 800mA (It can be less if the charger/cord is really ****, we had 300something mA with one combo)
The 2A OEM charger isn't 2A, but it's close enough.
microUSB plugs NEEDS to be 5mm or longer for them to mate in the plug properly, OEM is like 7mm
Some other crap I can't remember at 5am
So yeah, it's picky.
Use what it came with. It came with it for a reason.
Just got this in the mail from monoprice today and it's charging like a beauty.
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
Looks like it's back ordered now.
Sent from my Galaxy Nexus using Tapatalk 2
I'm using the stock 3.0 use cable that came with it, but within the past week or so, my charging times has doubled. Has anyone else had this issue with their phone (Note 3, AT&T, rooted but stock rom)?
Sent from where the wind begins....
You say you're using the stock cable, are you using the stock charger also? It's 2 amps which is higher then most other chargers.
Yes, the charger and cable are both the original ones that came with the phone.
Sent from where the wind begins....
I don't know why it's taking longer, but you could buy one of those USB current meters on ebay for about $4 shipped from China, and actually measure the charge rate of your USB cable. You'll be surprised how some cables are inferior than the other even though they work fine for data.
Also, I don't think the included USB 3.0 cable provides faster charge time. I just use USB 2.0 cable and wireless Qi charging at home. If I use a good USB 2.0 cable, I get up to 1.5A charge rate. When I use a Samsung genuine but thin USB 2.0 cable, charge rate goes up to 1A. Since our battery is 3000mAh, it'll take little more than 3 hours with the thin cable. I usually charge whenever and as often so I don't know how long it really takes.
I think it may be a hardware issue, as I noticed last night that after 3 hours, my phone was actually losing juice while plugged in to the charger. I also noticed that while lying in the table, the screen was going on & off on its own. When I played around with the cable where it plugs into the phone, it would vibrate intermittently. So I'm now guessing it's a problem with the port on the phone.
Sent from where the wind begins....
Try a different cable first. It is cheaper. My son's note 2 was doing exactly the same thing. Cable looked fine but swapping to a new cable solved the problem.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Check your wake lock
Kamau54 said:
I'm using the stock 3.0 use cable that came with it, but within the past week or so, my charging times has doubled. Has anyone else had this issue with their phone (Note 3, AT&T, rooted but stock rom)?
Sent from where the wind begins....
Click to expand...
Click to collapse
Hey, I had the same problem. I installed wake lock detector and found that carrieriq was slowly eating up my battery. I also installed cpuspy and found that all my cores were running at full speed. After all the trouble shooting I did, I eventually wiped my phone then installed my apps one by one... I figured out that setcpu or any program like that would get stuck on preformance, even if you set it to on demand, it won't stick. Thus leaving your CPU running at full speed...
rixking said:
Hey, I had the same problem. I installed wake lock detector and found that carrieriq was slowly eating up my battery. I also installed cpuspy and found that all my cores were running at full speed. After all the trouble shooting I did, I eventually wiped my phone then installed my apps one by one... I figured out that setcpu or any program like that would get stuck on preformance, even if you set it to on demand, it won't stick. Thus leaving your CPU running at full speed...
Click to expand...
Click to collapse
Battery drain isn't the problem though, it's the phone not charging. A good example is 2 nights ago. The phone was at 76% when I plugged it in and went to bed. It vibrated, the charging icon came on, and the led was red¦ everything showing the phone was charging. But when I got up the next morning, the battery had actually lost 8% juice.
What I found I have to do is put a rubber band around the phone and charging cable so that it's pulling the cable up harder into the charging port. So that means that it's either a cable issue, or the port.
Sent from where the wind begins....
Mad383Max said:
Try a different cable first. It is cheaper. My son's note 2 was doing exactly the same thing. Cable looked fine but swapping to a new cable solved the problem.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've got a couple 2.0 cables around here someplace. I'll give them a shot if I can dig them up.
Thanks.
Sent from where the wind begins....
Hey Peeps
Anyone else getting slow charging on SM-T810?
Using the bundled charger, I am getting average of only 680mA .... Definitely nothing over 950mA and that is even when screen is off...
Using the same charger and cable on my sony xperia Z3 easily achieve 1400mA ...
Same sort of numbers with other chargers etc... So pretty sure it is device not charger...
Sent from my D6653 using XDA Free mobile app
I just tested and am getting around 1500 mA. That is with my nexus 6 charger.
Bundled charger gives me around 1460 mA.
Are you certain it`s not the app that is wrong as the S2 is new and the app might not have been updated yet, Try the Samsung charging app below, you have to keep pressing the refresh button on the free version.
https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent.free&hl=en
John.
lu99ke said:
Hey Peeps
Anyone else getting slow charging on SM-T810?
Using the bundled charger, I am getting average of only 680mA .... Definitely nothing over 950mA and that is even when screen is off...
Using the same charger and cable on my sony xperia Z3 easily achieve 1400mA ...
Same sort of numbers with other chargers etc... So pretty sure it is device not charger...
Sent from my D6653 using XDA Free mobile app
Click to expand...
Click to collapse
The charging rate can be anything from 300mAh to the maximum the power adapter can output, the tablet will determine the amount of power it will accept, and will jump from fast to slow charge depending on how much more power is needed until it reach 100%.
Thanks guys - obviously does not seen to be wide issue.
I tried the Samsung app above ... Sort of showed similar values ....
I did a charge from 69% to full and it took about 1.5 hours... So would be maybe 5 hours to charge fully?? Unless the device does much quicker charging at very low battery??
I will do a full discharge down to say 5% and then charge from there and see how I go.
Thanks again
Sent from my D6653 using XDA Free mobile app
I would install battery monitor widget from 3c on the play store.
A pretty comprehensive battery app and will give you a full history and time line of charging and discharging cycles.
lu99ke said:
Thanks guys - obviously does not seen to be wide issue.
I tried the Samsung app above ... Sort of showed similar values ....
I did a charge from 69% to full and it took about 1.5 hours... So would be maybe 5 hours to charge fully?? Unless the device does much quicker charging at very low battery??
I will do a full discharge down to say 5% and then charge from there and see how I go.
Thanks again
Sent from my D6653 using XDA Free mobile app
Click to expand...
Click to collapse
Normally it will trickle charge slow once it reach approximate 80%, and is normally fast if the unit is almost power empty.
It's annoying. I've tried both ipad chargers and a 2.4A charger, but it will go to slow charging mode with anything else than the bundled charger.
Apoxx said:
It's annoying. I've tried both ipad chargers and a 2.4A charger, but it will go to slow charging mode with anything else than the bundled charger.
Click to expand...
Click to collapse
Yeah i have found exactly the same!! Must be some sort of Samsung handshake protocol...
There is another thread on this that I have mentions about this, just use a good quality charger, or just go for a Qualcomm QC 2.0 charger from any known brand like htc, aukey, xpower, lots to name, just searh Qualcomm site for a full list.
It won't used the QC2.0, but all should work just like the OEM Samsung one
the ipad charger should be pretty high quality though, so I don't get why it's being so picky.
Apoxx said:
the ipad charger should be pretty high quality though, so I don't get why it's being so picky.
Click to expand...
Click to collapse
If you also followed the tab S thread, it's also been mentioned, Samsung tabs S are also picky, and yes all apple stuff don't work.
Should I rephrase it and say some good quality charger will work, even branded ones like sony may not even work, but my intital testing, most QC 2.0 charger will work.
The issue is that I'm trying to find one charger that will charge both my tab s2 and my iphone 6+ quickly. Any idea how qc chargers fare with iphones? The bundled tab s2 charger only gave my iphone 0.4A (it charges the tablet at 1.5A)
I have both sony and asus chargers with included cables work perfectly with iphones and sony xperia z3 and nexus 7... Hopeless with S2.... But s2 charger works fine with them..
lu99ke said:
I have both sony and asus chargers with included cables work perfectly with iphones and sony xperia z3 and nexus 7... Hopeless with S2.... But s2 charger works fine with them..
Click to expand...
Click to collapse
Odd, my old Nexus 7 2012 charger fast-charges my S2 710 without any issue at all. I had it spare as the N7 died on me (the S2 is its replacement) and was initially wondering myself as I had a few supposedly 2A chargers at home which only slow-charged the S2 (or indeed under Android 5.0.2 said it wasn't charging at all, even though it evidently was, but 5.1.1 has fixed that).
That said this is a charger without fixed cable (but with a decent USB cable) and I know from Raspberry Pi experience that the cable is almost as important as the charger for getting decent charging (ie enough current) to the device on the far end.
I would make sure the USB cable is a decent one intended for charging.
Proper charging USB cables have the shield connected at both ends for use as ground which is why they are notably thicker.
ashyx said:
I would make sure the USB cable is a decent one intended for charging.
Proper charging USB cables have the shield connected at both ends for use as ground which is why they are notably thicker.
Click to expand...
Click to collapse
I agree, a good quality cable is required, as well as the charger itself, I'm using a magnetic cable and a reversible micro USB cable with a OEM Samsung, Aukey and Xpower charger, I don't get the speed of the QC 2.0, but it isn't suppose to as the S2 is not QC 2.0 compatible, but it does charge pretty quick, it also charges my ipod 4, and my nw-ZX2 work without any problems.
I get the "slow charging" message when using the Galaxy Tab S2 bundled charger.
If I use the charger from my Note 4 (Exynos) I get faster charging and no "slow" warning.
Did Samsung bundle it with the slow charger??
I can confirm that samsung did in fact bundle the tab s2 WITHOUT a quick charge usb charger.
I also thought the tab s2 didnt come with quick charge. I have extremely slow charge times but my battery lasts for DAYS... I can fully charge it, put it in airplane mode and check on it after 2 days and be at 98-99% battery.
I also use the quick charge cable AND the quick charge usb adapter that came with my note 5 and the tab still slow charges..
Here the same problem use Samsung charger and cable charge from 20% to 100% in 6 hrs and when use HUAWEI cable with Samsung charger It charged in 2 hrs
I guess Samsung have poor quality cable *-*
Sent from my SM-T815 using Tapatalk