Database Develop

[ROM][KANG]Team Asylum AOKP Final[11-02-2012] - Asylum CM10 Final[11-04-12]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
built by antiochasylum
Disclamer
Everyone knows the risk of flashing. I have tested this rom on my device for days now But as always it is YOUR DEVICE, you make the decision to flash it.
So you want to Install? Follow these Steps
-be on a proper recovery, with MMC_CAP_ERASE disabled.
-download your poison(aokp or cm both links below)/gapps to int/ext sd card
-if you pick CM make sure to thank theripper!!!
-nandroid
-wipe data/cache
-flash asylum-aokp-jb-xx
-flash gapps
-flash hydracore v7
-reboot
If already on AOKP
-download rom/gapps to int/ext sd card
-wipe cache
-flash asylum-aokp-jb-build-xx
-flash gapps
-reboot
Download
Build 08 is back on goo.im! - I recommend using the Goo Manager APP, open it, Browse compatible ROM's and you'll see my name , OR Click here
Removed APK's Final
Please flash Hydracore v7 after flashing rom and gapps - STD version can be found Here - not doing this will result in a boot loop.
CM10 Downloads
Asylum CM10 Final - Here
Please flash Hydracore v7 after flashing rom and gapps - STD version can be found Here - not doing this will result in a boot loop.
Asylum CM10 Removed APK's Final Here
Credits
-My wife!(for not leaving me! )
-Entropy512
-Xplodwild
-codeworkx
-sixstringsg (for making the n7000 buildable on aokp's source)
-zX TheRipper Xz - script genious, builder of asylum cm
-teamhacksung
-team kang
-CyanogenMod
-sswagonman - tester, friend
-chasmodo - tester, friend, hosting
-chadrick.7 - tester, fellow texan
-nascar24usa
People who bought me a beer! , Thank you!! - Donations are cherished and loved
Chasmodo - AGAIN!! - AGAIN!!! - AGAIN!!!
zX TheRipper Xz - AGAIN!!
albert Rustanto - AGAIN!!
snabben - AGAIN!! - AGAIN!!
blady-jack
sswagonman - AGAIN!!
patos46
[David]
happiboi - AGAIN!!
skillz9669
phly-phantom
patrice lenglart - AGAIN!!
karapoutsoglou
laloutre
trahzebuck - AGAIN!!
sudisk
andreww88
ExilHh
nascar24usa
antonius0809 - AGAIN!!
sunny2303
ilovemoney
dtswk
mfractal
jon3sh
GeorgEveS
thechints
xecut
MrDSL
[user_99]
srasher
ahalford
Guitarfreak26
vet-note
dtswk
darkness_78
mikeemoz
Ending
Press thanks ​

Changelog
Code:
Final Build - CM10
-repo sync 11/3/2012 - 1600
-CM file manager is in removed apk's if you want it.
-the end of the frontier(on this device)
Final Build - AOKP
-repo sync 11/2/2012 - 1200
-the end of the frontier(on this device)
Build 09
-repo sync 10/21/10 - 1000
-all changes and merges from AOKP
-played with a few string in settings
Build 08
-repo sync 0900 - 10/14/2012
-updated to 4.1.2
-updated system files to work with R3P0 kernel- thanks Gavin!!
-the kernel might eat battery. This has been reported already. If you experience this flash a stock CM kernel from 10/12/2012 and before.
-it boots! Lol.
Build 07 - pulled.
-repo sync 10/5 - 1600hrs.
-cherry picked - remove lockscreen vibration
-blind builds(only option now)
Build 06
to lazy to post lol
Build 05
-most recent aokp changes 9/16/2012 - 1300
-project lard still
-you can now select launchers on boot, apex or nova.
-quick reply from the status bar cherry picked
-goo.im hosting! - use the goo manager app - easiest way.
Build 04
-most recent AOKP changes and merges 9/8/2012 - 1900hrs
-Project LARD
-option to schedule a daily reboot
-next build will be included in the app :P
Build 03
-most recent AOKP changes and merges 9/5/2012 - 1300hrs
Build 02
-most recent HydraCore kernel(not released yet) STD version.
-repo sync - 9/2/2012 - 1700hrs
-few changes from aokp
-ability to pick your own boot animation
-kill-all-button option in rom control
-if you are having issues connecting to google services, please wipe,
otherwise this should be no wipe.
Build 01 AOKP
-We are shifting gears here. I deleted CM10 off my machine. AOKP will be going forward. I like it better :P
-If you want CM10 - go [URL="http://forum.xda-developers.com/showthread.php?t=1865477"]here[/URL]
-repo sync with AOKP up to 8/29/2012 - 1700 hrs.
-kernel is 100% stock that was built inline. Pick your own(HydraCore is recommend)
-asylumized :P
Build 01 Beta - Starting JB
-First build with Aroma installer(myself and zX TheRipper Xz have tested the installer 1000x different
ways, and everything works, so please let us know if you encounter issues, if the installer freezes for
any reason, just reboot back into recovery and start again.
-Gapps are included in the install, make sure to check them on additional packages.
-Changelog is built into aroma.
The end of the ICS Line
Build 21
-This was built by zX TheRipper Xz - THANK HIM [url="http://forum.xda-developers.com/showpost.php?p=30133773&postcount=6844"]HERE[/url]
-This is officially the final ICS Build.
-Just brings changes up to CM Stable.
Build 20 - Final CM Build.
-Repo sync 7/29/12 - 0800am
-Not alot of changes, but more up to date.
-trying to make this one the best yet.
-Big Changes to kernel.
-GPU clock values are 100,266,400 - up from 100,166,300(thanks novic_dev for the help!)'
-CPU OC - up to 1.6ghz
-Added governors; wheatley, lulzactive, interactiveX, smartassV2, pegasusQ, lionheart.
-Default is Wheatley, this will eat battery faster, but its super smooth.
-Default scheduler is V[R]
-kernel dubbed bbqR3
-big thanks to novic_dev and morfic for the kernel help.
Build 19
-Repo sync 7/19/2012 - 1030am
-Brings all of RC2 plus more.
-Updated Apex
-Updated SuperSU
-Asylum BBQ kernel re-based on the smdk4210 kernel.
-Removed all the **** load of governors, will add back lulzactive next build.
-Added 1.6ghz OC.
Build 18
-Repo Sync - 7/15/2012 - 1100hrs
-New kernel - Anidroid code - modified for asylum, dubbed "asylum bbq" - Thanks novic_dev! Source code [url="http://github.com/antiochasylum"]here[/url]
-Adds a crap load of govenors
-Adds 1.6 overclock as well.
Build 17
-Repo Sync - 7/9/2012 - 1700hrs
-From this point forward most builds will only be a repo sync, which bring in all the most recent changes
at that given time.
-This build adds the option to change the soft keys time out, in device settings.
Build 16
-Repo sync - 7/5/2012 - 1430hrs
-Updated SuperSU
Build 15
-Repo Sync -6/30/2012 - 1400hrs
-Added Lock screen Skulls, compatiable with ALL versions of Asylum, past, present and future(second post)
-Add JB window animations
-Fixed a FC at Settings/Apps for some.
Build 14
-Repo sync -6/25/2012 - 1700hrs.
-Updated Apex
-Updated SuperSU
-Remove LTE
-Removed Siri(she's a bit¢h)
-Will be released another version today with bottom status bar
Build 13
-Repo Sync - 6/20/12 - 1700hrs
-Kick ass boot animation - thanks toxicthunder!
-Updated Apex
-Updated SuperSU
-SoD's should be fixed
-Ported Siri from iOS
-Added LTE
-Enabled "Apple Mod" - This will automatically allow you to wear a black turtle neck with jeans.
-Added "iPhone Look alike mode" - This will shrink your device into iPhone size, making people think you are cool and have an iPhone.
-More but cant remember.
Build 12
-Repo Sync 06/14/2012 - 1400hrs
-upstream changes
-This will be last release till after my b-day(6/16/2012)
Build 11
Repo sync 1700hrs. - 6/11/2012
Storages seemed to have switched again? Anyone confirm this?
Linaro merges.
PA merges.
SODs seem are gone on my device.
Build 10
Repo sync - 6/9/2012 - 1600hrs.
Brings some cool features.
SOD's appear to be OK, I have not experienced any.
Not a lot more - RL has me busy!
Build 09
Repo Sync 10:00am today, brings alot of changes.
Fixes recovery install location
Fixes lock screen wake up lag
Added App Widget picker - per request
Center Clock mod still works - flash in recovery.
More stuff but I cant remember Lol.
Build 08
Repo sync 5:30pm today
Fixes weather refresh, adds calendar to lock screen
Replaced the CM weather images with AOKP ones.
Fixed status bar not showing up when doing a clean install
Goo.im web hosting now, Woot!
added the ability hopefully to update through the goo.im app,
i'm still not showing up, but it says to wait a bit. We will see.
Build 07
Repo Sync 9:00am this morning.
New CM features(lockscreen)
Added my Avatar in an easter egg. Find it, let me know :P
Screen freeze unlock is still present, Its the touchScreen service not starting. Directly related to Wifi being on. If wifi is off, no freeze.
Build 06
This IS a new build - repo sync as of 3pm today.
Reloaded is gone, I'm porting it, but its a slow process. He did ALOT with that systemui
Disabled the cursor when using the stylus
Disabled the stupid dimming of the status bar icons(credit to MrDSL) for pointing this out. Looks WAY better.
Fixed the "Location set by GPS" icon.
Updated Apex to 1.2.1
Same smoothness and stability as always :)
I think that's all - like I said, not alot of time on this build :)
Build 05
This is [b]NOT[/b] a new build, this is build 03 from May 17th, in which reloaded ICS settings works like a champ.
Updated Apex Launcher to most recent version 1.2.0
Removed UMS.apk(mass storage crap)
Speaker phone fixed(thanks to xplodwild for this!)
Removed APKs from build 3 work fine. Since they are the same.
Tablet mode from build 3 as well.
Kernel is built as of 5/23 - 2:28pm.
Build 04
Removed Reloaded ICS, its based off an old SystemUI, new changes are causing a FC, I've PM'd the creator about this. Sorry for now.
AsylumICSWallpapers.apk can be downloaded for kick ass wallpapers - APK is located in media fire folder, download and install as normal.
Repo Sync as of 11:15am this morning. Most recent changes are included.
Apex 1.2.0 - Most recent. Its ALOT smoother than previous builds. Wallpaper scales correctly.
Removed mass storage.apk - was a pain in the ass.
Few other changes, but I'm sleepy and I need a nap lol, Chasmodo knows why :P
Build 03
More murdered out stuff
Apex Launcher is now default launcher
New default wallpaper - thanks to sswagonman
Mass storage working - VIA app, until I can get more time to actually look at this(app is a workaround)
A few speed tweaks here and there, should improve overall smoothness - could be a placebo effect as well lol
More but I dont remember all of them, I'm still not awake yet.
All CM Upstream changes listed below.
Settings: Hide Wifi-Direct Settings if not supported - [android_packages_apps_Settings]
telephony: Consolidate Qualcomm RIL implementations - [android_frameworks_base]
frameworks: Fix audio routing when plugged to docks - [android_frameworks_base]
trebuchet: Add config for workspace grid size - [android_packages_apps_Trebuchet]
sed: fix handling of s/// which has empty matches - [android_external_busybox]
camera: Add parameters for some Samsung cameras - [android_frameworks_base]
add RIL for Samsung devices with Qualcomm radios - [android_frameworks_base]
Update profile drawables - [android_frameworks_base]
CMWallpapers: replace old CM logo with Cid - [android_packages_apps_CMWallpapers]
phone: OCD strings fix - [android_packages_apps_Phone]
phone: OCD strings fix - [android_packages_apps_Phone]
phone: OCD strings fix - [android_packages_apps_Phone]
phone: OCD strings fix - [android_packages_apps_Phone]
phone: OCD strings fix - [android_packages_apps_Phone]
phone: OCD strings fix - [android_packages_apps_Phone]
phone: OCD strings fix - [android_packages_apps_Phone]
init: Increase maximum number of Android properties to 372 - [android_system_core]
Enable Wi-Fi Direct Settings Menu. - [android_packages_apps_Settings]
Add required permissions and files for data - [android_system_core]
Telephony: Add HSPAP to getTcpBufferSizesPropName - [android_frameworks_base]
SimUnlockScreen: Explicitly register themeChange receiver - [android_frameworks_base]
Build 02
Changed the boot animation as well - made the rom 2MB bigger until I finish mine.
camera: allow setting parameter "video-size" before recording starts (android_packages_apps_Camera)
Settings: Add Missed call and Voicemail to notification light settings (1/3) (android_packages_apps_Settings)
Framework: Add Missed call and Voicemail to notification light settings (2/3) (android_frameworks_base)
Phone: Add Missed call and Voicemail specific notification lights (3/3) (android_packages_apps_Phone)
Allow theming of framework UI elements. (android_frameworks_base)
Power widget: Resize ring_on and ring_vibrate_on drawbles slightly (android_frameworks_base)
Settings: Updated icons (android_packages_apps_Settings)
Power widget & tether: Restore ICS drawables, replace/create xhdpi drawables (android_frameworks_base)
Prevent Sym key from showing the IME picker (android_frameworks_base)
Update reboot and screenshot drawables (android_frameworks_base)
Added a setting to do nothing/snooze/dismiss an alarm by flipping the device. (android_packages_apps_DeskClock)
Use preferences from default launcher (android_packages_apps_Settings)
Fix for wrong selection of sms template (android_packages_apps_Mms)
opengl: remove tegra errata duplicates (android_frameworks_base)
Add Hungarian predictive dictionary support - settings item (android_packages_inputmethods_LatinIME)
Revert Hungarian keyboard to qwertz and add alternative qwerty layout (android_packages_inputmethods_LatinIME)
Add Hungarian accents (required for the predictive dictionary to work) (android_packages_inputmethods_LatinIME)
MemoryHeapBase: ifdef for gingerbread compatibility (android_frameworks_base)
telephony: CDMA: fix ERI display when device is in airplane mode (android_frameworks_base)
Additional fixes for button/keyboard backlight auto-brightness. (android_frameworks_base)
Modified Torch string references for cleaner UX (android_packages_apps_Torch)
PanoramaActivity: null pointer exception (android_packages_apps_Camera)
Camera: sanity check for camcorder frame format parameter (android_frameworks_base)
Extended quick controls for tablet-like controls on phones (android_packages_apps_Browser)
Update korean translation (android_packages_apps_Settings)
frameworks/base: surfaceflinger: Enable dither if needed (android_frameworks_base)
FontRenderer: do not leak mIndexBufferID (android_frameworks_base)
SurfaceTexture: Reset buffer values on disconnect. (android_frameworks_base)
Surfaceflinger: Add Src orientation for the layer (android_frameworks_base)
Handling EGL_BAD_ALLOC egl error as return from swap (android_frameworks_base)
SurfaceFlinger: Return the current transform value when queried (android_frameworks_base)
Add lookup in Call logs to lookupNumber (android_packages_apps_Contacts)
Settings: Data usage: Linear chart option and 2GB to 100MB vertical axis limit. (android_packages_apps_Settings)
use TARGET_RECOVERY_FSTAB location if defined (android_bootable_recovery)
Settings - Update Italian Translation thanks to Francesco Margiotta (android_packages_apps_Settings)
Fix sent SMS timestamp display (android_packages_apps_Mms)
browser: removed unused string on values-nl (android_packages_apps_Browser)
SystemUI: calculate height for tablet status_bar_settings_view (android_frameworks_base)
Power Widgets: Add blue-background highlight on selection (android_frameworks_base)
Camera: Added German translation for "fixed" and "face detection" (android_packages_apps_Camera)
LGEQualcommUiccRIL: Fix multi-PDP support (android_frameworks_base)
Build 01
Initial release

Extra's
CM 9 safe kernel to flash. There are no modules in this kernel, just the kernel. Flash while phone in download mode from Odin or Heimdall.
Find it here
Not sure if its OK to flash from your current kernel? - Your answer awaits you here - credit chasmodo
FAQ's - by sunny2303
1. Has this ROM been ported from any other device ROM (like Nexus 7)?
No, we at Asylum believe in original work and the developer has built this completely from scratch using CM10 sources, for details refer credits in OP of ROM thread
2. Which kernels are safe to directly wipe and flash Asylum JB from? (BTW, flashing instructions in the OP need updating too - chas)
a) any CM9 or CM10 based kernels (don’t know how to put the goddamn bullet, someone edit my edits, please - chas)
b) any NoteCore, SpeedMod v4 and above, Franco v4 and above
c) any GB kernel
3. Which kernels must be replaced before wiping and flashing Asylum JB?
a) any CF--Root ICS kernel (GB are OK) ------>This one should be moved to #2, but only if Anti and Ripper are ABSOLUTELY certain that Asylum/Aroma updater script does not issue any dangerous format commands (contact me for detailed explanation - chas)
b) you must flash a safe kernel (see #2) if you have rooted any stock ICS Rom using CWM.zip with superuser and busybox
c) SpeedMod v3 and below, Franco v3 and below
d) old leaked kernels such as LP1, LP5 and LP6
4. What does Aroma Installer do?
Aroma installer helps you customize ROM to suit your requirements, with installation of your choice, from the choices in built in ROM installation.
5. Do I wipe before or after running Aroma Installer?
Always wipe before running Aroma. You will lose all user apps Aroma has installed if you do a
factory reset after the flash is done.
6. Do I need to flash Gapps separately?
Yes
7. Is removed apks.zip a CWM flashable zip file?
No, to avoid bloating of your phone with apps which you may not need, you can copy specific apk file from removed apks.zip and paste it in /system/app, change permissions to rw-r—r--
8. How can I change DPI settings?
Aroma installer provides you an option during installation to choose your preferred dpi between 320, 240, 213 and 160.
If you have installed with one of these setting and wish to change to other, you can use tool like “ROM toolbox lite or pro” (available on play store)
Non standard dpi settings (other than ones mentioned above) may result in improper functioning of some apps & play store
9. How can I change governor & scheduler?
You will have to use a tool like “Set CPU” (available on play store) to unleash options of governor & scheduler that Asylum kernel offers (alternative: you can change governor from Settings/Performance/Processor/CPU Governor, and I/O scheduler using Rom Toolbox/Kernel Tweaks - Rom Toolbox was already recommended for DPI management -chas)
For more information about governor & scheduler, you may refer here. Please thank the OP if you found it helpful
10. Which are compatible kernels with Asylum JB?
Asylum kernel which comes in built with the ROM is the recommended kernel
In case you wish to try other kernels, you may try any CM10 based kernel available on Chasmodo’s kernel repository. Please do not forget to press “Thanks” button if you pick any kernels there ☺
11. What is Full wipe & what is Cache wipe using CWM?
Full wipe :
Step 1. Wipe Data/ Factory reset
Step 2. Wipe Cache partition
Step 3. Advanced – Wipe Dalvik Cache
Full wipe will erase data like applications and application settings etc though user data like media files and external sd card content will be untouched. However, keeping a backup on PC is recommended.
Cache wipe:
Only step 2 & 3 of above
All data including applications and application settings as well as user data will be left untouched, only cache will be cleared.
12. I am on another JB ROM is it safe to flash Asylum JB from there?
Absolutely yes, however we strongly recommend Full wipe option mentioned above if you come from any other ROM other than previous Asylum JB versions (from JB Beta 1 onwards)
13. Can I do a Full wipe and still get my apps after flashing Asylum JB?
Well… Yes. While you are on your previous ROM make a flashable zip of your apps using “App2zip” application (available on play store). Place it securely on your internal sd card ( keeping a back up on PC is recommended). Once you have flashed Asylum JB, simply go in recovery mode and flash the update.zip you would have created earlier OR
You can use Titanium Backup for backup and restore, but we recommend only application restore and not data. For heavy data applications like games, you may want to use restore app+data option but smooth functioning cannot be assured (most users however have found this working well).
14. My external SD card is missing?
Use ES file explorer which comes with Asylum JB
Go in settings
Check the option “Up to root”, press back
In explorer mode click “Up”
You will find ExtSdCard, that’s where contents of your external sd card are
15. Can I use different themes on Asylum JB?
Of course you can… download any compatible theme of your choice from Play Store
Go in System settings - Themes – Theme chooser, choose downloaded them – Select apply
If you are getting a “Theme error”, apply default system theme and then apply downloaded theme, ignore any error message if it shows. This should work 9/10 times, else contact the theme developer and ask him to customize the theme for this wonderful ROM ☺
16. Do applications like S-Note, S-Memo work on this ROM?
NO. Since this ROM has its roots from CM10 and abovementioned apps are Samsung proprietary apps these apps are not and will never work on Asylum JB probably.
Thanks to varied developers, we have able substitution available for most of these apps, if you care to browse play store ☺
17. I cannot connect the Note to my PC as mass storage (USB). What to do?
Nothing. Mass storage connection has been dumped from JB altogether. Use MTP connection
instead.
18. I cannot set my notification toggles. What do I do?
Change your DPI to 320, set the toggles, then change back to ani DPI you prefer and the
toggles will be there.
19. I have a question which has not been answered above?
First of all, thanks for reading entire FAQ list ☺
Come and join us on Asylum JB discussion thread and we will be happy to help you to the best of our knowledge based on inputs (screenshot, logcat etc) provided by you

Sexy.

downloading....

looks interesting... will follow, right now sticking to CM9 and waiting for AOKP

Where is difference to CM9 ? Only removed .apk´s ?

m3dd0g said:
Where is difference to CM9 ? Only removed .apk´s ?
Click to expand...
Click to collapse
Alot more than apk's

antiochasylum said:
Alot more than apk's
Click to expand...
Click to collapse
Tell me pls ...

Good to see a release from you anti. Definitely gonna give this a spin over the weekend, I'm a huge lover of slim roms.
Sent from my GT-N7000 using XDA Premium HD app

I was just starting to make a light CM9/AOSP ROM and you beat me to it! Look's like I'll just use yours

hi
where can i change the density.

quarkw said:
hi
where can i change the density.
Click to expand...
Click to collapse
Rom tool box from play store or edit build.prop

Hmm interesting, trying this out, but first time for a backup.

m3dd0g said:
Tell me pls ...
Click to expand...
Click to collapse
Seems like you got ignored.....
/CK

m3dd0g said:
Tell me pls ...
Click to expand...
Click to collapse
I think everything anyone needs to know is in the OP, flash or move along

m3dd0g said:
Tell me pls ...
Click to expand...
Click to collapse
Download it and compare it.
Café King said:
Seems like you got ignored.....
/CK
Click to expand...
Click to collapse
No he didn't. Its called overlooking. And why does it matter?

Finding Update Package...
Opening Update Package...
Installing Update...
Gets stuck here ... formatted data / cache
not sure what i did wrong ... i came from ICS Stock

dick8843 said:
Finding Update Package...
Opening Update Package...
Installing Update...
Gets stuck here ... formatted data / cache
not sure what i did wrong ... i came from ICS Stock
Click to expand...
Click to collapse
Awe ****, hope you didn't brick it. LPY recovery is borked.

im not sure .. i think i might have bricked it .... i can still get to CWM can you still do that on a bricked phone ? but i wipe and still get stuck when flashing a GB ROM ....

[ROM][CM9] ParanoidAndroid [Build 12] - Jellybean flavoured - PDroid - Smooth&Stable

[ROM][CM9] ParanoidAndroid [Build 12] - Jellybean flavoured - PDroid - Smooth&Stable
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My port of PARANOIDANDROID - a phone and tablet mode hybrid for CM9
If you like the ROM please press thanks, rate this thread with 5 stars
and consider to
buy me a beer here!
also consider donations to:
molesarecoming (ParanoidAndroid)
D4rKn3sSyS (ParanoidAndroid)
Ricardo Cerqueira (Cyanogenmod) ​​Feature Spotlight
ParanoidAndroid
Per app densities and per app layout (tablet/phone)
Change the dpi value for each app (or system element) the way you want.
HwaSettings
Enable and disable the 2D hardware accelleration on a per app basis.
As we still don't have a properly working hwa (thanks LG!) this tool makes the waiting easier.
For example: Just disable hwa for the Browser / Facebook to fix the rotation crash.
Jellybean flavoured
Jellybean theme, animations, transitions
You can find even more Jellybean features here:
Jellybean keyboard - - - Jellybean Lockscreen - - - Google Now
PDroid
Deny certain apps the access to specific ressources.
Highly Optimized
V6 supercharged, OOM groupings, lagfree, dalvik fixes, etc.
and a lot more
P990: automatic detection of SU660 BBs for automatic time (automatic NITZ fix)
a couple datadrop fixes
adb remount enabled
flashable zip for LG UI 3.0
flashable zip for AOKP weather icons
tons of other things I am too lazy too list​----------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------
Userthread in the General section:
[ROM][CM9] ParanoidAndroid [Userthread]​​----------------------------------------------------------------------------------------------------------------------------------​What is it?
PAD (Per App Density) - choose a custom density for each of your apps!
PAL (Per App Layout) - chose PhoneUI or TabletUI for each of your apps!
To be honest, this is not tablet mode at all, it has nothing to do with silly build.prop hacks.
This is the first and only Android rom to feature true Hybrid mode.
This rom lets you scale and project every app, every widget, even systemcomponents individually.
Remember, android is modular, everything is an app: Lockscreen, navigationbar, dialogs, popups, keyboards, widgets, and your regular apps of course.
Apps have the capability to switch into various designs or layouts according to the device they run on.
This can result in a complete new experience as many apps will transform to the better.
Now for every element that you like chose a mode (PhoneUI, Phablet/Nexus-7UI, TabletUI) and/or a size.
You are 100% independent of the system DPI which runs nicely in whatever value it has been assigned to.
You do not need to boot your phone into a certain DPI. Neither will most of the changes you apply require a reboot.
You will not suffer from the myriads of troubles which normally haunt you under build.prop tablet mode.
Your market, phone, etc. will all work, apps won't shrink on you unless you shrink them yourself.
This project will entirely transform your device, but retain the aesthetics and the feel of your phone.​
Thread Overview:
Post --- You're looking at it!
Post --- Downloads, Installation Instructions, Known Bugs & Changelog
Post --- Addons
Post --- Cherrypicks
Post --- Q&A by noahk423, ty!
You have a problem?
First consult the Known Bugs section!
Next read through the Q&A!
Still nothing? - it's time to use the search!
Okay, go ahead and post your problem - but please include as much information as possible!
Try to include a Logcat if you want quick help! (How to Logcat)
If you post something that is mentioned in the Known Bugs or the Q&A section you will get personally FACEPALMED:​
Original Links:
ParanoidAndroid original website
Galaxy Nexus
Samsung Galaxy S II
Walls, Themes, Guides etc. (Themes GNex only!)
Thanks to Donators:
aragorn7 (***)
xox101 (***)
scrm3r (**)
SREEPRAJAY (**)
SuperSkill (**)
nekke (**)
fnl (**)
mgl2 (*)
eyekool (*)
JulianTp (*)
phatpaw (*)
tehSecret (*)
Ska1i (*)
Nova163 (*)
jaspi72 (*)
Garfields 2X (*)
rzlatic (*)
theevilworm ()
fuxmen ()
Sjamaan ()
arroccoli ()
Sparazza*()
I add everyone here who has his xda name in the PayPal comment. It can take a couple days sometimes.
If you didn't do that or I somehow forgot you please send me a PM and I will make sure to add you asap!
Credits:
The CM Team and especially Ricardo Cerqueira, our CM device maintainer
D4rKn3sSyS and molesarecoming for the PARANOIDANDROID ROM
pastime1971 for his CM9 build and constant support. Thank you so much!
EaglesBlood Team for their data drop fix
owain for the screenshots, porting it to the G2x and his overall greatness
benee for the work on JB and the kernel
zeppelinrox for his V6 SuperCharger Script
noahk423 for creating and maintaining the Q&A
goo.im, Korumera, vadonka and dev-host for hosting!
Team Syndicate for their Theme
Someone forgotten in this list? Please send me a PM!

Known bugs: (build 12)
To refresh the HwaSettings database you need to clear it's data.
Some apps don't like non-stock DPI values and will FC. Solution: Settings - Paranoid Settings - List of apps and apply "PhoneUI" + "Stock DPI (Phone)"
This fixes 99% of all app FC's!
Same bugs as all CM9 ROMs for the 2x due to the missing LG blobs (no full Chrome / Opera support, no video recording etc.)
Downloads:
ROM + Hybrid Gapps: http://goo.im/devs/tonyp/
Gapps mirror: http://d-h.st/vyo
or use the GooManager (supports update notifications!)
Instructions:
Flash ROM + Hybrid Gapps
Advanced - Fix permissions
Reboot
Do another reboot!
You don't need to do a full wipe. Just flash and wipe cache + dalvik.
If you want to keep your customized densities then make a backup of your pad.prop file with the "ParanoidAndroid Backup" app!
If you're coming from another ROM a full wipe highly recommended. It might work without if you come from another CM9 based ROM but: don't even dare to post any bug reports when you didn't do a full wipe!
Don't restore system apps (like Settings) or system data (like Wifi data) with TitaniumBackup!
You'll find a new Settings entry "Paranoid Settings" where you can setup all the magic
By default I set it up to use the standard Phone UI and disabled the navigation bar which I don't need.
But you can enable it at Settings - System - Navigation bar!
If you want to use adb, here are my modded adb drivers for ICS.
If you have a problem please have a look at the Known bugs and Q&A before you post in this thread.
If you want me to look into an issue attach a logcat, I will most likely ignore bugreports without a logcat.
Changelog: (click on Build XX for more detailed information)
Code:
[U][URL="http://forum.xda-developers.com/showpost.php?p=32513469&postcount=1605"]Build 12[/URL][/U]:
[LIST]
[*]USSD fix
[*]memfree values baked into the framework (instead of the init.d script)
[*]back to arcee's kernel. hackfest one will be provided via flashable zip
[*]some small performance improvements
[*]synced to the latest CM9.1 sources
[/LIST]
[U][URL="http://forum.xda-developers.com/showpost.php?p=31115658&postcount=1342"]Build 11[/URL][/U]:
[LIST]
[*]I'm using the JB hackfest kernel from now on.
It's arcees kernel with a couple additions from benee (thx benee!)
zRAM is enabled by default with the so-called memfix script
[*]pad.prop cleanup (no pre-configuration anymore, only fixes included)
[*]Torch button readded to the navigation drawer widget
[*]Synced to the latest CM 9.1 sources
[/LIST]
[U][URL="http://forum.xda-developers.com/showpost.php?p=30833745&postcount=1208"]Build 10[/URL][/U]:
[LIST]
[*]from now on I build PA directly from source, no more ugly porting!
[*]this gives us great stability improvements and performance enhancements
[*]added a [b]Center Clock[/b] option for PhoneUI - I absolutely love it!
[*]added a setting for system volume as requested
[*]lots of bugfixes and enhancements
[LIST][*]enabled the mobile data limit function
[*]fixed the broken contacts widgets
[*]you can enable KSM now - but beware, it is battery hungry
[*]many many small bugfixes
[/LIST]
[*]based on ParanoidAndroid v1.6 (the latest ICS version)
[LIST][*]Improvements on frameworks, fixed all DPI related crashes
[*]SystemUI mode can be configured now
[*]Cleanup and speedup of hybrid code via native libs (~25%)[/LIST]
[*][COLOR="SeaGreen"][B]this build was a [b]lot[/b] more work than the changelog suggests
I had to redo almost everything from scratch![/B]
You can follow everything here:
[url]https://github.com/tonypp[/url][/COLOR]
[/LIST]
[U]Build 09[/U]:
[LIST]
[*]Let's flag the testbuilds as build 9 to prevent confusion
[*]from now on I build PA directly from source, no more ugly porting!
[*]this gives us great stability improvements and performance enhancements
[*]synced to the latest Cyanogenmod ICS sources
[*]based on ParanoidAndroid v1.6 (the latest ICS version)
[LIST][*]Improvements on frameworks, fixed all DPI related crashes
[*]SystemUI mode can be configured now
[*]Cleanup and speedup of hybrid code via native libs (~25%)[/LIST]
[/LIST]
[U][URL="http://forum.xda-developers.com/showpost.php?p=30322120&postcount=945"]Build 08[/URL][/U]:
[LIST]
[*][url=http://forum.xda-developers.com/showthread.php?t=1357056]PDroid[/url] included. To use it just download the [url=https://play.google.com/store/apps/details?id=com.privacy.pdroid&hl=en]app[/url] from the market.
[*]HwaSettings permission fix, manual chmod not needed anymore.
[*]P999: harshs kernel updated to 0208, linux 3.0.39
[*]various bugfixes and improvements
[/LIST]
[U][URL="http://forum.xda-developers.com/showpost.php?p=29954293&postcount=747"]Build 07[/URL][/U]:
[LIST]
[*]HwaSettings fully implemented
[*]please read the instructions in the [url=http://forum.xda-developers.com/showpost.php?p=29954293&postcount=747]build 7 feature announcment[/url]!
[/LIST]
[U][URL="http://forum.xda-developers.com/showpost.php?p=29906459&postcount=683"]Build 06[/URL][/U]:
[LIST]
[*]Datadrop fix included. Thanks to the EB-Team for sharing this to me!
[*]Modded the Phone.apk to fix incoming call screen layout
[*]Support for the [url=https://play.google.com/store/apps/details?id=com.s0up.goomanager]GooManager[/url] included
[*]Preparation for HwaSettings (will come with build 07)
[*]Synced to the latest CM source
[*]based on pastimes build 20120806
[/LIST]
[U][URL="http://forum.xda-developers.com/showpost.php?p=29543803&postcount=420"]Build 05[/URL][/U]:
[LIST]
[*]JellyBean flavoured (JB theme, JB animations, JB transitions etc.)
[*]Performance improvements
[*]Fixed call muting
[*]Fixed black vertical lines (are now grey like they should)
[*]Modded the Trebuchet launcher for a couple bugfixes
[*]Various small changes, fixes and improvements
[*]Synced to the latest CM source
[*]based on pastimes build 20120729
[/LIST]
[U][URL="http://forum.xda-developers.com/showpost.php?p=29180526&postcount=165"]Build 04[/URL][/U]: ([COLOR="DarkRed"]full wipe build![/COLOR])
[LIST]
[*]Wifi tethering working \o/
[*]P990: automatic SU660 BB detection for the NITZ fix (824 + 1120 + 420)
[*]adb remount working (-eng instead of userdebug build )
[*]Synced to the latest CM source
[*]Various smaller bugfixes and optimizations
[*]based on pastimes build 20120723
[/LIST]
[U]Build 03[/U]:
[LIST]
[*]skipped
[/LIST]
[U][URL="http://forum.xda-developers.com/showpost.php?p=28784403&postcount=65"]Build 02[/URL][/U]:
[LIST]
[*]V6 SuperCharged (100%)
[*]P990: automatic SU660 BB detection for the NITZ fix (824 + 1120 BB)
[*]pad.prop changes (density adjustments)
[*]Scrolling Cache set to "Default Disable"
[*]rebased to pastimes build 20120624
[/LIST]
[U]Build 01[/U]:
[LIST]
[*]ported ParanoidAndroid v1.5 (newer versions won't work w/o PA source)
[*]lagfree + dalvik fix included
[*]based on XXMrHyde's RC11 20120703
[/LIST]

addons
LG UI 3.0
LG UI 3.0 with the stock app drawer icon
LG UI 3.0 with this new icon (last screenshot)
Weather Widget
All credits to Impact7 and hei1125​
Lockscreen weather icons
AOKP weather icons (left image)
Tick weather icons (see here for the full iconset)
Thanks to Dark Emotion & AOKP & VR Team​
Downloads:
http://goo.im/devs/tonyp/
Mirror:
http://tonyp.hopto.org/

PA testbuilds
There are no new testbuilds anymore.
The Cyanogenmod team has stopped working on new features for CM9 - if you want to have state of the art builds then use my CM10 ParanoidAndroid ROM.
On the newest build I made the following cherrypicks:
I included the Center Clock option - you can choose it at System - Combined Bar - Clock Style
fix wifi sleep policy
bootmenu custom reboot logic
system volume
disable scrolling cache
Remove 10MB of useless video from builds
If you want to see more cherrypicks included then feel free to recommend them to me!

Q & A
Q&A
This Q&A has been written mainly by noahk423 from the G2x section.
If you appreciate his work please head over to the original post and leave him a Thanks there!
​
Q: Some apps Force Close for me
A: Some apps don't like non-stock DPI values and will FC.
If an app Force Closes go to Settings - Paranoid Settings - List of apps and apply "Stock DPI (Phone)" (or custom 240 which is the same thing).
For apps with widgets also check the "Force Scaling (widgets)" option. After a reboot your problems are gone.
This fixes 99% of all app FC's!
The next 0.5% are caused by restores from TitaniumBackup. Please try to avoid any unnecessary restores!
Q: My status bar disappeared?
A: Hold power button until Power Menu comes up, click Expanded Desktop.
Q: Video recording isn't working
A: Yes, that's LG's fault, we need the official ICS release for that. You can use "Videocam illusion" from the playstore. No HD but at least recording is working with it.
Q: Paranoid Android settings force closing?
A: Clear data for "Settings" and see if that works. If it doesn't, did you do a full wipe before installation? If you didn't, then that is most likely the problem.
Q: My Youtube videos won't play?
A: Turn phone to landscape mode, and turn off the HD option.
Q: I saw something about a hotfix in the thread, do I still need to flash that?
A: No, you only need to flash hotfixes if they're mentioned in the first post. If not the hotfixes are already baked in into the newest version.
Q: I don't have the on-screen navigation buttons? I want those bacause it looks nice in Tablet UI!
A: Go to Settings> System> Navigation bar> Softkeys, also works without Tablet UI.
Q: No USB mounting support for my SD card?
A: The stock kernel doesn't support UMS. Flash a custom one (like Harsh's) and go to Settings> Storage> Menu> USB computer connection.
Q: The Stock browser crashs from time to time.
A: Yes, the Stock browser crashes when turning from landscape to portrait. There is now a fix by tonyp here: http://bit.ly/R6afjw
Q: What are the major bugs in this ROM?
A: Nothing ROM related! There are only the typical ICS bugs. We need the official ICS release by LG to solve them. Examples are no video recording(Camera does work though).
Q: Does Chrome work?
A: Nope! Cnrome does not work because of missing drivers. We need the official ICS build for the Optimus 2x.
Q: My font size is rather small?
A: Increase either the default or the apps specific density at Settings> ParanoidSettings or go into Settings> System> Font Size> and choose another font size.
Q: I've changed some things in Paranoid Settings. After rebooting, these Settings now force close, what do I do?
A: Just reflash the ROM without wipe. This will fix it because it replaces the (modified)pad.prop in /system with an unmodified stock(as the ROM came) pad.prop.
Q: When switching through homescreens, I get a blue outline of the screen and I don't like it, how do I get rid of that?
A: Go to Settings> Launcher> General> Disable the "Tablet effects" option. Then go to the Homescreen settings an change the Transition effect to Standard.
Q: My alarm didn't ring today, so I was late for work, then I got fired, then my house got reposessed, then my car gave out of gas, so now I'm just sitting under a bridge with my phone and what little battery I have left. Why didn't my alarm go off?!
A: This was probably a bsod (black screen of death). All phones react different to different kernels, you have to try yourself which one works best for you. Don't undervolt! Undervolting increases the chance of bsods a lot. If this only happens during charging it's a charging bsod with an easy solution: Go into Settings - Developer Options and check "Stay awake"(No man's financial life was harmed in the making of the above question)
Q: Does the HDMI connection work?
A: Yes! The HDMI connection works at full 1080p HD, just not at 720p though(just like CM7, and any other ROM). Just plug it in and it recognizes it just fine!
Q: When using a root checker, I got a failed root check(saying I'm not getting root access). What do I do?
A: Try wiping the data of Superuser. If that doesn't work, try updating the SU binary, or the app itself. If that doesn't work, the ultimate solution is to wipe data(a complete data wipe/factory restore in CWM to be specific), and reinstall the ROM, this might not work however, a trick that has been used by a fellow Optimus 2x user, found that he had to erase all internal memory in "Mount Storage". But, in reality, there is NO need for a root checker if everything else Superuser related works, so don't worry!!
Q: Can you include the Optimus 4x lockscreen?
A: Unfortunately: No - and there's nothing I can do about that as long as the ParanoidAndroid team doesn't release it's source.
Q: Why isn't Opera working?
A: The newer versions aren't working on on P99x ICS unfortunately. You need to use Opera Mobile v11.5.3 or Opera Mini v6.5.2.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Extras/Fixes!
Some settings menus are not reachable in TabletUI and Portrait view, the problem is the too small screen size.
For example: Settings - Security - Screen lock - Pattern: The Next and Cancel buttons are missing in TabletUI.
There are three workarounds:
Most of the times it's enough to just tilt the device into landscape, the missing settings will appear due to a specific landscape layout.
Setting the Tablet DPI (128) does make it work, but it will get pretty tiny.
Last but not least: Apply PhoneUI (and if needed even a dpi of 240).
​

Nice mate awesome work I will make you those graphics
Sent from my HTC One X using XDA Premium HD app

well, well, well... finally arrive here for our device...

great job bro... one question... which kernel you recommend? I will test your room

heelo why when I download GAPPS I have massive speed about 1 kB/s ????

fuxmen said:
heelo why when I download GAPPS I have massive speed about 1 kB/s ????
Click to expand...
Click to collapse
http://d-h.st/vyo
Sent from my LG-P990 using xda app-developers app

Beta tester here, i'll post some feedbacks

The ROM is owesome!!!! Can't be more happy with it see hows battery.

great going Mate,
thrilled to see so much enthusiasm shown to our devices inspite of those S***** LG guys towards ICS.
THANKS TONY

Nice port !
works great with harsh kernel until now
(but I didn't get the first FC)
Thanks !
JJ

Im using with Jarvisv7, afte 1hour of light usage still 100% of battery Smooth as hell 1216Mhz Sometimes a little poor of space in two column view but who gives a ...

fuxmen said:
Sometimes a little poor of space in two column view but who gives a ...
Click to expand...
Click to collapse
I changed settings.apk from tablet to PhoneUI with 140 DPI custom. Now is it in single column view and much easier to read.
---------- Post added at 10:24 AM ---------- Previous post was at 10:21 AM ----------
How can I change dialer DPI (or what app does manage call answering screen) .. the fonts are huge and that ring is half under bottom of screen.
Thanks

Great to see PARANOIDANDROID also on O2X,
keep it up

So I've just set it up like I do on every Rom. It is already pretty awesome to have this Rom now on my Phone , thanks for that.

Quick question. Is it a good idea if i flash this lagfix after installing this rom?
http://forum.xda-developers.com/showthread.php?t=1730872

tiithe said:
[/COLOR]How can I change dialer DPI (or what app does manage call answering screen) .. the fonts are huge and that ring is half under bottom of screen.
Click to expand...
Click to collapse
Now I managed to get font to normal size, but call answering ring is still half hidden to bottom fo screen. Lockscreen ring position is OK.
Seems like contact picture frame is too big.

[ROM] [JB] ▬ ½ i l l u s i Θ n ▬

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

FAQ by sunny2303 and toxicthunder
--------------------------
What is an MD5 check-sum?
MD5 sum helps you identify any probable data loss issue which might have happened during the download process
and as a result of which you might be at a risk of flashing a incomplete/inaccurate download.
To mitigate this risk, simply check MD5 sum
(This can be easily checked with the help of ES file explorer/ Root explorer apps) and compare it with MD5 given on download site.
These 2 minutes can save 2 hours of reflashing for you.
What are the safe kernels that I have to be on, in order to flash this ROM?
CM9 / CM10 based kernels
any NoteCore, SpeedMod v4 and above, Franco v4 and above series of kernels.
any GB kernel.
I am coming from ABC - XYZ rom.
Is it safe to flash this ROM over it?
Yes ONLY when your ABC-XYZ reads -
Official CM10 or AOKP builds
CM10 or AOKP variant builds
Any other AOSP based ROM
I want to brick my device and then blame HI for it.
What do I do?
The best way to brick your device and blame HI for it is to flash HI over these kernels -
any CF--Root ICS kernel
SpeedMod v3 and below, Franco v3 and below
old leaked kernels and re-packs such as LP1, LP5, LPY and LP6 etc
What is Full Wipe & what is Cache Wipe using CWM?
Full wipe = Wipe Data / Factory Reset
This wipes all your user data like user applications, account settings, logins etc along with the cache partitions.
However, data stored in your sd-card like pictures, movies etc remain intact.
Cache wipe = User Applications and data remains untouched.
Only the cache you have previously accumulated gets purged.
What are Gapps? Why do I need them?
Please buy a Nokia or a BlackBerry.
Best wishes,
Toxic
Which version of Gapps should I flash? And when?
You can also download from Goo.im or other JB threads that provide the same.
You may flash them after you have installed the ROM (assuming you have done so after a Full Wipe).
Yet, I would personally request that you first flash the ROM and re-boot to see if all's well. Flashing Gapps + Kernel + other MODs seems to be giving issues on THIS rom.
Which kernels can I use with HI?
Since the ROM has been updated with the latest r3p0 drivers, it is essential that you use ONLY the kernel that comes with the ROM.
Where is the Email App? And the Exchange App?
Anything that you can't find will be provided in a .zip file called [COLOR="Green]RemovedAPKs[/COLOR].
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Download the zip and place in your device.
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Using a suitable File Manager to extract the zip.
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Copy the apks for applications which you want.
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Paste them under[B] /system/app[/B] folder.
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Change permissions to[B] rw-r--r--[/B] (simply set it same as any other app in the same folder)
[IMG]http://img217.imageshack.us/img217/1002/linekb.png[/IMG]
[SIZE="3"]I can't find S-Note or S-Memo in this ROM. [/SIZE]
Neither can I.
What is the default DPI in HI and how can I change it?
Default DPI in HI is 320. To modify this -
Open your File Browser that has root access.
Navigate to /system/build.prop and open it as a text file.
Scroll down to ro.sf.lcd_density and set it to any number of your choice. Recommended values are 240, 213, 160 etc.
Reboot.
In case there are errors or issues, no one is responsible but yourself. So unless you know what you are doing, please tread cautiously.
How do I choose themes on HI?
Download any compatible theme of your choice from the Play Store.
Go in System Settings --> Themes –-> Theme chooser.
Choose downloaded theme –-> Select Apply.
My Question is still unanswered. And I am a bit shy of asking on the threads, lest I should be stoned to death.
What do I do?
Read some motivational books that help you work on your self-confidence.
Come back to the thread and ask.
If it turns out that your question could be answered by simply using the search function,
or reading the first 4-5 posts - chances are you will still be stoned.
Motivational books are boring. I watched 300 instead.
Now I am all pumped-up to ask any question, no matter how pathetic.
Good. This gives us the opportunity to see how long you can withstand the stoning.
Your watching 300 should be of some help to you.
--------------------------

||||||**```~musssst read post~```**|||||||
IMPORTANT INFO
** Please search first and then read here/FAQ before asking the question in the thread - you might get ur answer. If not then ask away **
[*] Click Me for the Removed APKs zip.
Paste the desired apk from the zip to the /system/app folder using a root browser and set the permissions to -rw-r--r-- without fail :good:
[*] Kindly use the kernel which is already inbuilt in the rom. If you try to flash any other kernel that doesn't support the r3p0 mali drivers then it wont boot.:cyclops:
[*] The Andy 4.2 Clock app included in rom is different from the one provided in the removed apks zip. The removed apks zip contains the stock 4.1 clock app ​
Changelog:
Code:
[FONT="Franklin Gothic Medium"][SIZE="4"][B][COLOR="SeaGreen"]CP9 - HULK[/COLOR][/B][/SIZE][/FONT]
- The awesome themeing of ROM elements based on the [B]Marvel HULK[/B]!
- All synced till Nighty 9.2 (no new merges and extraordinary changes)
- Usual HI Tweaks
NT 9.2 - Nightly
- [B]Pure repo sync with AOKP gerrit. Check the AOKP gerrit for the recent changes. Cheery picks will be highlighted here[/B]
NT9.1 - Nightly
[B]- S-Pen gesture support (Thanks Steve Spear) (Swipe Right, Left, Up, Down, Double Tap and Long Press. Used Navbar actions so the spen can theoretically replace 6 buttons on the navbar.)[/B]
- Added option to show connected wifi network
- Added themes support to Mms (ala handcent theme ability)
- Cog Circle Mod Battery
- Additional HSPAP support
- Added setting to set Circles Lockscreen
- Added customizable options for Circles Lockscreen
- Restore correct volumes when headset is plugged
- Lefty Mode for NavBar
- NavRing: Long press actions
- Set Stock music layout for Lockscreen while enabling Circles style
- Fix volume track skip control with 3rd party applications
- Ability to set navbar width/height to 0 (off)
- Don't adjust volume when vol-downing to vibrate or silent
- Bluetooth: Making 48K as the default sampling rate for SBC encoding
- Other usual HI tweaks
CP 8.1 - Super Commando Dhruv Edition
[B]- Andy 4.2 Clock App included
- Andy 4.2 Camera with working Photosphere included (stock 4.1 camera is intact)
- Andy 4.2 Keyboard with gesture typing is included (select the "Android Keyboard" in Language & Input)
- Build themed on the Raj Comics superhero - Super Commando Dhruv (SCD)[/B]
[B]- Custom Vibrations[/B]
- Change network location provider package
- Resizable NavBar Widgets (Holo themed)
- Widget Picker color in Navbar
- Added back Quick Emoji
- Added timeout and instant lock option to slide lock
- Fix launch of home button when screen times out
- VPN Traffic Amount in Human Readable Format
- Added Fast Charge Toggle to Overlay (requires custom kernel)
- Added vibrate back to the stock toggles.
[B]- Custom Lockscreen targets[/B]
- Landscape while in call
- Fix H+ and added new navbar widget icon
- Add increasing volume option for alarm clocks (use DeskClock apk from latest removed apks zip)
- Fix menu button in landscape
[B]- Added Ram Bar in Recents screen (select the option)[/B]
- Fix landscape ring position (was cut-off)
- Fix Vibrations fragment when using dual-panel
- Make alternate GB layout look like GB
- Add Ring/Vib/Silent & Homescreen toggles to the lockscreen
- Enable audio & call related logs
- Lockscreen targets: make separate targets for Unlock and Homescreen
- Fix lockscreen wallpaper picking
- Added options to hide weather panel
[B]- Added Weather panel actions and clock/date derp[/B]
- Fixed Kill App
- Added group mms threading
CP7 - Ghost Rider
- [B]Kicka** bootanimation and theming of rom based on Marvel SuperHero GhostRider[/B]
- [B]Update to 4.1.2 (JZO54K) binaries from Google[/B]
- Block unsupported requests to avoid RIL wakelocks.
- Fix brightness bar on tabs.
- Un-hard-code default toggles and remove vibrate from default.
- Fixed 2G Toggle long-press action.
- [B]SystemUI: Custom Nav bar for Tablet UI.[/B]
- Alt Signal Layouts.
- [B]Add option for vibrate on expanding notification.[/B]
- Other bug fixes and optimizations.
CP6.1 - TRANSFORMERS
- [B]This build specifically addresses the RILJ wakelocks.[/B]
- Rest all CP6 merges are retained
- [B]Kindly use the kernel which is already inbuilt in the rom.
*If you try to flash any other kernel that doesn't support the r3p0 mali drivers then it wont boot.
*Wait till the kernels are updated by their devs to support the drivers and then you can flash anyone u like[/B]
CP6 - Transformers
- The awesome themeing of ROM elements based on the [B]Hasbro's Transformers[/B]!
- New bootanimation
- Add xhdpi sysbar images and add correct size icons for other resolutions
- Calculator now contain New Features
- [B]Added CPU boosting interface[/B]
* Boost CPU to max during scrolling
* Boost CPU to max on activity start/resume
- Update Sensors/Camera to VRLG7 blobs
- Fix Share to Clipboard Icon
- SystemUI: add screenshot to navbar
- [B]Add option for switching between UMS and MTP/PTP mode[/B]
- [B]Allow mounting of multiple volumes via mass storage[/B]
- Fix recents opening when waking the device with the home button without lockscreen
- Fix automatic brightness
- [B]Adds the ability to force dual panel at any dpi[/B]
*This allows tablet mode with single panel and also allows regular phoneUI with dual panel
*This will only affect apps with dependencies to framework-res.apk , in other words gapps email.apk etc are not affected
- SmsUsageMonitor: Increase default # of sms sent in checking period
- [B]Update with mali r3p0 libraries[/B]
- libmedia: Fix for LPA audio loss issue
- ROMControl option for Default App Picker Alternate Style
- New Notification Toggles. Thanks Cyberboob
- Usual HI tweaks and custom rings
CP5 - Spiderman
- Spiderman Edition, Dedicated to Bangsti
- New Spiderman Theme
- Latest AOKP merges till 25th Sept 12
- Nova Launcher upgraded to version 1.3.1
- Added weather key for samsung cameras
- Fixed setting of custom icons for navbar targets
- Fix error when attempting to enter Phone setting
- Stopwatch & Countdown timer added
- Update Google repos to android-4.1.1_r6
- New Bootanimation
- Fix NavBar ring's center layout on lowered DPIs
- Fix NP check in CPUSettings
- Some tweaks to suppress the memory leakage
- In input added option to toggle pointer icon when using stylus - by default pointer is off
- Made all icons look the same as the Google Now icon in the NavRing
- Added USB mass storage notification to tablet status bar
- Disable touch while using the stylus
- QuickReply: multi SMS reply WIP
- Cleaned up ROMControl and reorganized the Lockscreen
- Fixed the random numbers showing up when setting a DPI
CP4.1 - IronMan2
- Update fix to counter the app FC issues
- Latest AOKP changes till - 17th Sept
CP4 - IronMan
- The awesome themeing of ROM elements based on the Marvel SuperHero IronMan!
- AOKP changes till - 15th Sept
- Force TabletUI at any dpi and DPI changer
- Allow Rotation of Lockscreen
- Custom Vibrations
- Allow full theming of Contacts & MMS via theme chooser
- Let the T9 dialer search through nickname and company
- Timer Snapshot & Volume Zoom support in Camera
- Add ability to answer call with hardware home button
- Add daily reboot option - (use this option if in case u experience severe memory leak)
- Fix for phone rebooting when unlocking in landscape
- Fix for NavBar Hide
- Custom HI wall and tones
- Other usual HI tweaks

niyazidk said:
I have su installed after i flash the rom. When i try to update su binary, i get an error massage because su cant get root acces. Anyway now i made a hard reset and updated su from market. The result is the same.
https://mail-attachment.googleuserc...344028288674&sads=0TdBJuEqtB9jamNHEju9b50PmkM
Click to expand...
Click to collapse
niyazidk said:
I did it as you write, but i am not prompted to gain root acces. I was on cm9 before this without this problem and flashed abys kernel before flashed this. I am going to sleep... : (
Click to expand...
Click to collapse
niyazidk said:
Her is the solution... flash it in recovery
Click to expand...
Click to collapse
You guys just require everything to be flashable! Some clear instructions but no one want to follow them Its hard to read than to flash ?
Hope you guys know there are two root access granting apps - Superuser by chainsdd and SuperSu by chainfire.
By default the SuperSu is there in the rom. When u open it it will give you update binary pop up and when u click on continue it will say operation failed.
So just hit the play store and install the Superuser (for those who have hard time finding it on store here) After that open Superuser once and update if it asks to.
Now go ahead and open SuperSu and it will ask for root access now....grant it and done. Now all the root access will be given by Superuser and not SuperSu.
Hope this helps Try reading and following the steps...they are easier than flashing
P.S.- Will be fixed in the next version. Added to the to-do list and working on it and other fixes (basis Preview 3 by xplodwild)

Bug report : Remove navigation bar in settings does not work

aalupatti said:
Bug report : Remove navigation bar in settings does not work
Click to expand...
Click to collapse
Yeah thanks. Added for the next version fix. Already figured out the way to remove it. Just need to test

WoW. Congrats. Better Comes. Best To Come. Downloading Now. Will post Results in Discussion Thread Later.

On which preview it is based?

toxicthunder said:
sorry guys, unfortunately it was way past mid-night when I uploaded this - hence couldn't complete the OP.
Working on next build, as well as the OP.
One more thing, before trying out solutions to any bugs or issues, please consult with people who have the necessary know-how regarding the topic - Asylum inmates need not be told. This is just for the newer users.
If you try to be a smartass and pass on stupid advice (like Abyss is safer than CM9) I will report you immediately.
Cheers!
Click to expand...
Click to collapse
We don't want excuses toxic we want no we demand results and etas and Siri and smemo too lol
from the padded cell tucked away in the dark

Hey, thank you for another jellybean port. You guys make our notes better and better
One thing tho, I notice that stock launcher is Nova launcher. Is there anyway that we can get stock jelly bean launcher?

Siri is a must if you can't provide that just give up. LOL
Sent from asylum east wing wardens office.

Morning Toxic
is it worth to flash the version 0.1 after the test or shall I wait for the next one?
I'm still on JB had FC with Tapatalk and Playstore.
Bluetooth is working well.
edit
Don't need Siri she's to arrogant

Everyone, just a small request from me - please use the discussion thread so that we can keep this thread clean.
Thanks
Sent from my GT-N7000 using xda app-developers app

vet-note said:
Morning Toxic
is it worth to flash the version 0.1 after the test or shall I wait for the next one?
I'm still on JB had FC with Tapatalk and Playstore.
Bluetooth is working well.
edit
Don't need Siri she's to arrogant
Click to expand...
Click to collapse
No need. Nothing much changed.
Sent from my GT-N7000 using xda app-developers app

I hope this will be fix gps, will be my daily for sure.

Guys I want to know if u also face the same problem or I only screwed up something. Start the Android Hotspot and try connecting any other phone or tablet or lappy and see if it gets connected and the 3G or 4G watever gets shared over there.
In my case hotspot opens up fine but m unable to connect anything to it.
No one reported the issue hence thought of asking
BOOMED from my BOMBASTIC NOTE

I never use hotspot but I just tried and I faced the same issue as you.

abhisahara said:
Guys I want to know if u also face the same problem or I only screwed up something. Start the Android Hotspot and try connecting any other phone or tablet or lappy and see if it gets connected and the 3G or 4G watever gets shared over there.
In my case hotspot opens up fine but m unable to connect anything to it.
No one reported the issue hence thought of asking
BOOMED from my BOMBASTIC NOTE
Click to expand...
Click to collapse
It's a known issue. reported it on preview 1. I need it lol

I really don´t like to repeat myself, but on which preview is it based?

[ROM][old|new bl] ParanoidAndroid v2.6 - build 13 [May 20] [linaro][stable][smooth]

ParanoidAndroid CM10
- this is for you, if you want a stable ROM without the need to flash another update each day -
- no cutting edge 10.1 features but therefore almost bugfree daily driver experience -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
ParanoidAndroid:
Hybrid Engine - choose custom DPIs and Layouts for each app - see post 4
Center Clock option
Transparent Statusbar option
Brightness slider in the notificationbar option & different notification toggle styles
See through lockscreen
etc.
PDroid included to protect your privacy
HwaSettings included (read the Q&A in post 2 why)
adb remount command unlocked (to be able to adb push to /system etc.)
standard softkey vibration lowered
ships with the awesome kowalski kernel by pengus77
opensourced: https://github.com/tonypp
NEW: automatic NITZ fix for automatic time
NEW: linaro smoothness
NEW: lockscreen selection (Blackberry 10 / Optimus 4x / ICS etc.)
NEW: allow to select text in gtalk
NEW: statusbar color and transparency
​
If you like the ROM please press thanks, rate this thread with 5 stars
and consider to
buy me a beer here!
also consider donations to:
Ricardo Cerqueira (Cyanogenmod)
molesarecoming (ParanoidAndroid)
D4rKn3sSyS (ParanoidAndroid)
​​
CREDITS:
arcee for being our CM device maintainer. Without him none of this would exist!
molesarecoming & D4rKn3sSyS for founding and inventing ParanoidAndroid.
pengus77 for his awesome work at the kernel and new bootloader.
marsgod for fixing the callbug on the old bootloader.
wkpark for the cracked ICS bootloader, the ramhack idea, and all is valid input.
goo.im and vadonka for providing me great hosting services.

Q&A:
What are the known bugs?
There are a couple CM10 bugs present.
The most noticable are:
CM Camera isn't working great. Use the ported ICS Camera as a workaround
Low brightness after unlocking the screen. This is a CM issue with an easy workaround: Turn on all animation and transition scales at Settings - Developer Options.
transparent notification dropdown & statusbar isn't working (or at least not sticking a reboot) (fixed for build 05)
Auto brightness is flawky
HDMI rotation error
Please consult this post for more information about the bugs.
Not all of them are still present, some have already been fixed in the meantime (wifi drain, bluetooth, notification lights)
I got a bug which is not listed here, how do I report it?
First: Try to search for your bug, I don't add each and every stupid minibug to the known bugs list, but it's most likely already mentioned in the thread.
If you didn't find anything then report your bug. I ignore bug reports which don't contain logs, so you should study my [Reference] How to get useful logs thread.
If you want to report a sudden/hot reboot then you need to follow this format for the bugreport.
Can I post in here if I want to chitchat and talk with you guys, recommend my new app discoveries or ask questions which are only slightly related to PA?
No, please use the Userthread for stuff like that.
While everyone knows that I don't mind a couple funny or offtopic posts, we shouldn't drift off too far in the dev thread.
But every post in the Userthread is welcome - especially your tipps & tricks or app recommendations!
Is there any reason why I should use this ROM instead of others?
Well, use whatever ROM you want. This ROM isn't for people who always want to have the newest of the newest - so if you're one of that kind then just move on.
The biggest difference to other ROMs currently out there: This ROM is stable. I'm using it myself as a daily driver.
I really hate threads of people who push out ROMs without testing them or at least reading the users feedback (*cough* jellybam *cough*).
Why the f*** did it took you so long to release PA?
Simple. My PA ROM has always been as stable as possible. I didn't consider CM10 stable enough until now for being eligable to have another ROM out besides the official CM10 ROMs.
The OP is too long, can I ask what I need to know without reading it? And do I really need to search before asking?
Sure, go ahead and ask without searching or reading. I did spent lots of time on a detailed OP and answering questions in the thread, so I can just spent some more time answering every question again and again, right?
As the people who are targeted by this entry probably won't read this anyways but just post there's no need to expand further.
Oh but I'm looking forward to create a hall of fame shame of all those stupid posts :fingers-crossed:
Hahahaha you included HwaSettings again? Why would you do that, we do have fully working hwa, didn't you know?
Ah a smartass. But did you know that hwa increases the application's RAM demands?
The author of the HwaSettings app writes the following:
royale1223 said:
Basicaly you can deny hwui to any app that targets API 10 or below, any app that uses Holo.Light theme(Eg: Gmail : No gradient needed, but you have to be carefull because apps like Google+ and Github relies on hwui for animations/effects) or any app that doesn't have a UI. You see when hwui is not denies some libs are loaded :
Code:
07-17 14:20:37.968: D/libEGL(4041): loaded /system/lib/egl/libGLES_android.so
07-17 14:20:37.976: D/libEGL(4041): loaded /system/lib/egl/libEGL_POWERVR_SGX530_125.so
07-17 14:20:37.991: D/libEGL(4041): loaded /system/lib/egl/libGLESv1_CM_POWERVR_SGX530_125.so
07-17 14:20:37.991: D/libEGL(4041): loaded /system/lib/egl/libGLESv2_POWERVR_SGX530_125.so
If you deny hwui, these are not loaded. So denying hwui for one or two apps won't make a diffrence, but disabling hwui for many apps can save you some memory or even some battery.
Click to expand...
Click to collapse
As we're running low on RAM with our phone I thought it might be a good idea to include the app, then you can disable hwa for some apps or system parts and post your feedback here.
Additionally here's an interesting post by Dianne Hackborn about hwa.
Oh, that sounds great! But why are my newly downloaded apps not listed within the HwaSettings app?
That's a bug of the app unfortunately. You need to reset it at Settings - Apps (swipe to all, choose HwaSettings and delete data).
Is this the newest version of PA?
No, unfortunately not. The new and improved version (AOSPA 3.0) which source has been dropped in January 2013 is based on AOSP - which we need to port to the 2x first. So the new app in the PlayStore won't work with this "PACM" ROM.
But this ROM does contain all CM10 stuff including the latest CM-based PA hybrid engine.
I heared there's PDroid 2.0 - why is the old version included?
I'm monitoring the new threads of course. PDroid 2.0 is by another author than the original one. Development is currently stalled thus I'm stickying to the original and well tested version for now.

Downloads:
ROM:
Download: http://tonyp.basketbuild.com
Make sure to download the correct version for your bootloader!
For detailed instructions about CM on the new bl see this thread by pengus77
Mirror: http://goo.im/devs/tonyp
Gapps:
Standard CM10 Gapps
You know what you get. Official Gapps package.
Lite by KonstaT
Only the minimum needed files for the Google Services - no additional stuff for facelock, thinkfree, Now, TTS etc.
Aroma Multipack by tantrums
Aroma installer with TONS of customizations and options. Really worth a try.
Inverted by justin860
Aroma installer if you like black backgrounds. You need the 4.1.2 package, and follow the instructions!
gtalk videochat fix
Additionally, if needed - the gtalk videochat fix by wfd
gapps with faceunlock & Gtalk video
Gapps package with working faceunlock & gtalk video by Metallica
Kernel:
kowalski kernel thread
This ROM comes with the kowalski kernel by by pengus77.
For new versions (which come regularly) check out his thread!
Various:
my modded adb drivers
To be able to use adb in CWM at Windows.
Instructions:
Coming from another ROM:
Make sure you're using a correct recovery. I recommend TWRP, but you can use CWM as well of course.
If you're on the new bl make sure you use the CWM by pengus, not the old ones!
No need for a full wipe you're coming either from a official CM10 old bl or from a CM10 new bl ROM.
Any other ROM: Do a full wipe! Apperantly even needed if you come from CM10.1.
Just do the wipe, you will be thankful afterwards when everything does run better.
Format /system
Choose the correct ROM for your bootloader
Flash ROM + Gapps (from the ones I linked above AND NOT MY NONNEON 4.2 ONE!!!!)
Flash the latest kowalski kernel!
Reboot
Don't restore system apps (like Settings) or system data (like Wifi data) with TitaniumBackup!
You'll find a new Settings entry "Paranoid Settings" - to get a first impression of PA choose "Launch" and then "tonyp's profile".
If you want to use adb in recovery, here are my modded adb drivers for ICS.
Updating from a previous version:
Backup your PA Settings (at Settings - Paranoid Settings - Tools)
Download new build
Flash ROM (you don't need to do a full wipe - or any other wipes)
Flash the latest kowalski kernel!
Reboot
done
Changelog:
Code:
[U]Build 13[/U]:
[LIST]
[*] fixed searchkey hardwarebinding
[*] enabled notification dropdown transparency
[*] better autobrightness ROM support
[*] pengus77 call muting & call forwarding fixes (thx a lot!)
[*] added new Hardwarekeys binding options backported from my CM10.1 ROM
- Switch to last app
- Screen Off
- Power Menu
- Open custom app
- Screenshot
- Kill app (replaces the menu in the dev options)
- Quickmemo
[*] tonyp memory management backported from CM10.1 and enabled by default
(more advanced and less aggressive than the one in PA12)
[*] camera storage selection
[*] force clear cache by longpressing the clear all button on recent apps
This one is from my not-yet-released CM10.1 build 04b.
Do not overuse this feature, it's only there to get rid of lags!
[*] GPS updates by crypted
[*] Dalvik: disabled bytecode verification
[*] backported my theme fixes for the text-only battery style
[*] merged the latest CM10 updates - which aren't many as CM10 is almost dead
[*] kernel updated to kk 122
[/LIST]
[U]Build 12[/U]:
[LIST]
[*]I backported the CM10.1 clock app to CM10. This should help with missed alarms (plus contains more features and has a nicer look)
[*]Reverted the brightness testing stuff which caused some erratic behaviour
[*]added a warning dialog when enabling the CRT dialog that you shall not complain about it's broken-ness
[*]toolchain reverted to the previous 4.6.2. linaro one. I'll post some toolchain testing builds soon
[*]removed the KSM option
[*]removed the PerformanceSettings warning dialog
[*]kowalski kernel updated to kk 116
This should fix the recent reboots
[/LIST]
[U]Build 11[/U]:
[LIST]
[*]remove defective init..rc cpu parameters
[*]enable development settings by default
[*]disable auto rotate toggle by default (2/2)
[*]force crt animation to be disabled by default
[*]disable auto rotate toggle by default (1/2)
[*]update weather api calls
[/LIST]
[U]Build 10[/U]:
[LIST]
[*]kernel updated to kk 120
[COLOR="DarkRed"][B]Note[/B]: This build is incompatible with kernels < 119! You won't be able to change brightness manually with older kernels.[/COLOR]
[*]low brightness after unlocking bug completely fixed (even without the animations)
[*]auto brightnes should work again - but it's handled in the kernel (like in ICS) so you can't adjust it.
It still doesn't work perfectly - but at least better than before.
[*]0% battery shutdown bug should be fixed.
[*]I fixed call rejecting on SU660 BBs for real - I missed one constellation where it could still fail
[*]disabled the crt animation by default (hopefully) for real
There were four spots in the source where it's been activated, I think I tracked down all of them now
[*]removed live wallpapers
[*]xda member jojosch93 send me a couple German translations for the Launcher and Settings which I included
[/LIST]
[U]Build 09[/U]:
[LIST]
[*]under-the-hood stability & memory related fixes
[*]Selfported AOSP 4.2-based launcher replaces the Xperia one
[*]SuperSU replaced with new Superuser
[*]cherry-picked option to disable low battery warning and/or sound
[*]cherry-picked option to disable the bootanimation
[*]purgeable assets enabled by default
[*]Lumberjack replaced by SysLog
[*]merged upstream with CM10
[*]updated kernel to kk 115 and KowalskiManager to 017r
[/LIST]
[U]Build 08[/U]:
[LIST]
[*]tonyp: P990: fix call rejecting on SU660 Basebands
[*]tonyp: init: allow graphics to kill the bootanimation
[*]tweak for default ADJ values
[*]telephony: neighboring cells are now handled properly
[*]gnu linker (ld) updated to be able to enable the "--icf=safe" flag again
[*]bionic: Add ARMv7 optimized string handling routines
[*]option to enable the notification rotate toggle
[*]updated kernel to kk 109 and KowalskiManager to 015r
[/LIST]
[U]Build 07[/U]:
[LIST]
[*]Performance control build from source now (buggy UV section removed)
[*]massive sources cleanup
[*]further improvements for the PA launch profiles
[*]lots of stuff from build 06 reverted while trying to get rid of the
data corruption bug, which turned out had been the kernels fault
Together with some under-the-hood changes the following got reverted:
[LIST][*]bionic: Add ARMv7 optimized string handling routines
[*]option to enable the notification rotate toggle
[*]option to control visibility of soft keys in tablet status bar[/LIST]
[*]Kernel updated to (non OC) kk 100p2
[/LIST]
[U]Build 06[/U]:
[LIST]
[*]dpi backup script added, custom dpi settings will survive ROM flashes now
[*]bionic: Add ARMv7 optimized string handling routines
[*]ADJ values reseted to AOSP default
[*]option to enable the notification rotate toggle
[*]option to control visibility of soft keys in tablet status bar
[*]newbl version: RIL replaced with the correct v28g newbl one
[*]Kernel updated to (non OC) exp 003 (prerelease)
[/LIST]
[U]Build 05[/U]:
[LIST]
[*]build with linaro 4.6.2 and loads of build optimization flags.
Smoothness here we come!
[*]loads of stability fixes from various sources (even cm10.1 backports)
including stuff like wakelock and memleak fixes!
[*]Xperia Launcher replaces Trebuchet
[*]added possibility to select text in Gtalk
[*]option to disable volume adjust beep
[*]Statusbar color and transparency fixed (survives a reboot now)
[*]Allow purging of asset bitmaps
[*]"Android is Updating, Optimising Applications" shows more infos
[*]new lockscreen selection (Optimus 4x, Blackberry 10 etc.)
no complaints please, I'm aware of the minor flaws it still has.
[*]option to enable CRT animation (sometimes flawky!)
[*]new PA tonyp 2013 profile added
[*]Stock UI profile fixed (why did noone notice this? lol)
[*]ibjpeg-turbo replaces jpeg
[*]Kowalski Kernel updated to build 100 (OC).
Slow charging fixed on the oldbl! thanks so much pengus!
[*]lots of more stuff
[/LIST]
[U]Build 04[/U]:
[LIST]
[*]implemented a method to automatically apply the NITZ automatic time fix.
Automatic time will work out of the box for all Basebands now!
All SU660, v28, V30 and future ICS Basbands get detected automatically.
There's no need to manually add "telephony.test.ignore.nitz" anymore! :)
[*]Reverted to stock CM RIL. But the test with v30a has been successfull.
Advanced users can get the RILs here: [url=http://goo.im/devs/tonyp/P990-stuff/Basebands/RIL]RIL Downloads[/url]
[*]Kowalski Kernel & Manager updated to 011p3
011p3 fixes the lags, slowdowns and crashes from the previous version.
[/LIST]
[U]Build 03[/U]:
[LIST]
[*]fixed the Launch menu in Paranoid Settings
[*]loads of cherrypicked and backward-ported fixes for dhcp & wpasupplicant
Too many commits to list here. This should improve the wifi stability.
Thanks to tetsuo55 & pengus77 for their help & testing.
[*]KowalskiManager added
[*]Kowalski Kernel updated to 011
[*]re-enabled auto brightness (which is still flawky like with all CM ROMs)
[*]AOSP bootanimation (the logcat showed an error when showing the old one)
[*]iwconfig / iwlist added to enable TX power changing
[*]PDroid.apk "hacked" to disable notifications by default
[*]Cherrypicked [url=http://review.cyanogenmod.org/#/c/28689/]criticalBatteryShutdownLevel[/url]
[*]removed VideoEditor for real this time
[/LIST]
[U]Build 02[/U]:
[LIST]
[*]v30a RIL replaces the old v28 one (RIL modified for the oldbl)
[*]fixed the Toggle 2G button
[*]kernel updated to pengus 009p2
[*]PerformanceControl, Lumberjack & BarcodeScanner apps added
[*]Bluetooth crosshair pointer replaced with win pointer
[*]unset Phasebeam as default wallpaper
[*]PA Colors profile deleted (only useful for the navbar)
[*]Enabled installation of non market apps by default
[*][strike]VideoEditor removed[/strike]
[*]2G icon replaces GPS one in the tonyp profile
[*]stabilization improvement
[*]disabled KSM (can cause problems)
[/LIST]
[U]Build 01[/U]:
[LIST]
[*]initial build
[*]Changes compared to my old CM10 hackfest build 8:
[LIST][*]full hardware accellertion, videocam, camera etc.
[*]I fixed the need to flash gapps after every update
[*]CM Filemanager added
[/LIST]
[*]Changes compared to official CM10:
[LIST][*]Notification lights (more or less) fixed (use: always on)
[*]Bluetooth, Wifi, Wifi AP etc. fixed thanks to pengus77's kernel.
[/LIST]
[/LIST]

I'm new to ParanoidAndroid. I flashed it and see no difference, what to do now?
I suggest to go to Settings - ParanoidAndroid - Launch - and choose "tonyp's profile".
That's the setup I'm currently using, with the following config:
Standard DPI for apps & system at 190 DPI
Tablet UI for Settings, Browser, Gmail,
6 Holo Toggles in the Notification Dropdown menu and a brightness slider
How to change the dpi (size) and layout of an app
The 1280px layout has been removed from Youtube's newer versions. But these pictures still show the How To!
How to set the workspace mode

noteworthy posts
I get asked the same question about my personal tips and recommendations very often.
Thus I started to add some of my answers from within this thread here, to help you find the answers quickly.
Top tips:
My advanced ROM configurations
Greenify app tip
How to get useful logs
Everything else:
Solution for the brightness low after unlocking bug
Does the bootloader matter?
GPS problems? Not for me
Why I am using 420 BB
Extract parts of backups with AppExtractor v2.0
IData corruption in the kernel? It's been fixed! read here
Why the CRT effect is flawky

This is great. rom and kernel from two guys who have risen o2x.
Thanks.

Well i can't wait to try this)i missed the less vibration)
GO PENGUINS!)
Sent from my LG-P990 using xda premium

Great! Thank you! The best ROM is back!
Gesendet von meinem LGP990 mit CM10.

link
@tonyp the link to [email protected] kernel thread is missing

Okay, both builds are pushed to the server
http://goo.im/devs/tonyp/ParanoidAndroid-P990
They do contain the kowalski 007 kernel, so you don't need to flash the kernel on top.
But I'm sure pengus will release another kernel build soon as he's damn fast - especially for a penguin

Thanks tonyp for your work.
I Am now downloading.
maybe my last rom.
I am getting a iphone 4s.
Sent from my LG-P990 using xda app-developers app

tonyp said:
Okay, both builds are pushed to the server
http://goo.im/devs/tonyp/ParanoidAndroid-P990
They do contain the kowalski 007 kernel, so you don't need to flash the kernel on top.
But I'm sure pengus will release another kernel build soon as he's damn fast - especially for a penguin
Click to expand...
Click to collapse
It's the size that marks the difference... you know that
The smaller the penguin, the faster he codes hahaha

tonyp said:
Okay, both builds are pushed to the server
http://goo.im/devs/tonyp/ParanoidAndroid-P990
They do contain the kowalski 007 kernel, so you don't need to flash the kernel on top.
But I'm sure pengus will release another kernel build soon as he's damn fast - especially for a penguin
Click to expand...
Click to collapse
Just so you know Tony, the link here works fine, But the link in your OP for new bootloader comes up with a message saying OOPS can not find.
Will flash this shortly, just charging the phone up.

pengus77 said:
It's the size that marks the difference... you know that
The smaller the penguin, the faster he codes hahaha
Click to expand...
Click to collapse
So pengus77 if we wil make you smaller in length you wil make faster a kernel ?
Rom works good
Sent from my LG-P990 using xda app-developers app

winstonxl2 said:
So pengus77 if we wil make you smaller in length you wil make faster a kernel ?
Rom works good
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
It's the cage concept... i only grow depending on the amount of space i have available around me. And the space is small, so i'm forced at my computer. Give me a bigger space, i will grow, and find other things to do

Gonna try this tomorrow, so much good stuff around lately!

Well, Thank you both of you for providing a stable ROM/Kernel for the O2X because those last days all I'm seeing is half-baked ROMs/Kernels or just "i-wanna-be-dev" copy/paste ROMs.
So thanks again.

BigD18t said:
Just so you know Tony, the link here works fine, But the link in your OP for new bootloader comes up with a message saying OOPS can not find.
Click to expand...
Click to collapse
Working now, I am downloading it.

Does anyone have problems with turning wifi on? If yes please flash pengus77's new kernel on top - that will fix it:
http://d-h.st/users/pengus77?fld_id=9540
Strange enough, worked perfectly fine for me on yesterdays build, on the new one today it didn't - although there were no changes in the kernel repo. Using the new bl version.
But maybe it's just at my end.

[ROM][5.1.1_r34][p6800/p6810](6April2016-Build1.8)SlimLP 5.1.1-.beta.0.15-UNOFFICIAL

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimRom is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and Gerrit.
Code:
/* #include <std_disclaimer.h>
*
* Your tablet's warranty is now void.
* This is a custom ROM developed by p3dboard.
* You are flashing this on your Samsung Galaxy Tab 7.7 at your own peril.
* I am not responsible for hard bricks, damages to SD Cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* I would definitely help you out if you are stuck somewhere, provided that you give
* me clear details of the mishap.
* Don't ask for ETA's cause there is a thing called "LIFE" outside XDA.
*/
SlimLP is currently in beta stage, some settings are already in place, much is still missing and would come with time. Stay tuned!
I am also new to development, so not as experienced as Daniel, and I also don't have a lot of extra time, so I'll do what I can, and fix what I can as I learn over time. But I wanted to contribute something new, and from Daniels survey, Slim was the second most popular rom after Carbon.
WHAT'S INCLUDED: (This is just a standard blurb, some of these SLIM extra's are not in their Beta yet)
Android Lollipop
Slim Center
Slim Launcher
Slim File Manager
Slim Heads Up
The Real Dark Slim User Interface
SlimPIE (inspired by ParanoidAndroid's PIE with a light touch of Slim)
Smart Card Service
Adaptive Backlight
Adaptive Brightness
Smart Lock
Privacy Guard
Sounds Tweaks(Audio FX and Music FX)
Status Bar Tweaks
Battery Saver Mode
Removed Bloatwares
Notification Reminder/Snoozer
Drawer Shortcuts
Lockscreen Shortcuts
Custom Quick Settings Tiles
Improved Performance
Camera - True View
Camera - Smart Capture
and Much More!
WHAT'S WORKING:
Camera
Video Recording
Wi-Fi
Bluetooth
ADB
Proximity Sensor
External SD Card
Internal SD Card
Video Playback
Speaker
Airplane Mode
RIL(Mobile and Data Network)
Compass - Can require calibration before being reasonably accurate (moving tablet around in a figure 8 a few times) - Might be a way to recalibrate this?
Automatic Brightness Sensor
GPS
POSSIBLY WORKING - TESTING REQUIRED:
Mobile Hotspot (can someone with a p6800 tell me if it works for them?)
BUGS/NOT WORKING:
Wifi Driver Bug that can reboot (ES Explorer Direct Send between two devices)
QS Torch Tile (Quick Settings Torch)
Touch Keyboard at initial boot - you need to either not flash GAPPS immediately or cancel the Setup with GAPPS flashed, then go into SETTINGS -> LANGUAGE&INPUT -> Current Keyboard and then turn on Hardware Input - After that the AOSP keyboard works - need to figure out how to fix this.
HOW TO INSTALL:
1. Download the ROM and the GApps and place them on your SD Card/Internal Storage.
2. Reboot tablet into TWRP recovery.
3. Wipe data, cache(factory reset), dalvik/art cache and system.
4. Flash the ROM and the GApps.
5. Reboot System. (First boot takes 5-6 minutes. Be patient.)
UPGRADING: If you are upgrading from a previous SlimLP build (not Kit kat Slim rom's, as you will get some issues)
1. Download the ROM, place it on your SD Card/Internal Storage.
2. Reboot tablet into TWRP recovery.
3. Flash the ROM
4. Reboot System.
SOURCES:
Daniel_HK's GitHub
SlimRoms Website
Google+
My code change notes - Download "Slimlp Changes to compile.txt" - How to compile after you have read and understood Daniels Instructions on compiling Rom's - read - read - read - something I didn't and don't always seem to do
CREDITS:
SlimROMs Team
@daniel_hk
and others I may have forgotten.
DOWNLOADS AND CHANGELOG IN THE SECOND POST
XDA: DevDB Information
SlimLP 5.1.1 by SlimRoms, ROM for the Samsung Galaxy Tab 7.7
Contributors
@p3dboard
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Galaxy Tab 7.7 (p6800,p6810)
Based On: AOSP
Version Information
Status: Build #1.8
Latest Build Release Date: 2016-04-06
Created 2015-09-15
Last Updated 2015-10-28

Change Log and Downloads
Slim Gerrit - Slim Rom's change log
4 April 2016
SlimLP Beta 0.15 - Build #1.8 - Build Date 20160406 - Download ROM from this URL
- Updated Source Code to Beta 0.15 (Patch Level is up to February 2016 in Security - Possibly this is the last update Slim might make for Android 5.1.1, CM 12.1 sources have been updated to April 2014, but not Slim so far)
- P6800 & P6810 builds completed (just the NoZram version)
- Added Daniel's Performance Control app, but it errors out when going to the Battery tab, I'll leave it in their incase anyone wants to use the CPU / Governor controls - but if you want to tweak memory, use another app like Trickster Mod from the play store.
- Returned Davlik Memory settings back to stock in this build, as if you don't have too many apps installed that run background services, you can open apps that use larger Ram values.
I decided to recompile a newer build as I wanted a Rom with a more recent security patch level that also had Google Play Movies working, Android 6.0 currently has issues the the L3 DRM blobs. It's still got the same old issues as mentioned in the first post with workarounds as above - Touch keyboard, and the QS Flashlight not working, along with the reboot bug if you try to transfer data over Wifi using Es Explorer. But apart from that its pretty stable.
28 Oct 2015
SlimLP Beta 0.10 - Build #1.7 - Build Date 20151028 - Download ROM from this URL
- Updated Source Code to Beta 0.10
- Making two version of the build, one with zRam and one without - you can choose which one you feel performs better
- Updated RIL libraries for p6800 from Daniels latest CM 12.1 build (October 2015 build)
- p6800 rom's uploading now for Build 1.7, zRam and no-zRam version
- The no zRam version still supports zRam but its not turned on by default. If you have the app Trickster Mod from the playstore, (there's probably others) you can turn the zRam off any time you want to while running the rom. If you turn it off and then back on in Trickster Mod however, the new zRam partition is only 10% of the memory, which is smaller then the 256mb zRam I am turning on at boot.
- P6810 Zram build uploaded, uploading non-zram p6810 rom version now, compiling p6800 rom.
- P6810 beta 0.10 compile completed (no zRam version), uploading, compiling p6810 zram build. Once this finishes building, i'll start the p6800 build
- Synced SlimLP Beta 0.10 source code, starting compile of P6810 rom
- I'll make two builds of each for the next rom, one with Zram turned on and one without.
- I still haven't had time to look at the Keyboard issue or the QS torch icon, got to many things on at the moment - so just doing source code updates
14 Oct 2015
SlimLP Beta 0.9 - Build #1.6.2 - Build Date 20151014 - Download ROM from this URL
- Added missing blob libsec-ril.so file for p6800
- Added a 256mb zram swap partition (cm12.1 i9100 nightly just implemented this as they said it can help with low memory situations, so I've added it to see if it helps us at all - give me feedback, we can always turn it off).
@4:05pm - p6800 build is uploaded.
@3:35pm - p6800 build complete, checked that libsec-ril.so was in the /system/lib folder. Uploading now (about 30min it should be there)
@8:44am - build 1.6.2 for p6810 with 256mb zram uploading now. I am building the p6800 rom now.
@8:25am - I just discovered I missed adding /system/lib/libsec-ril.so to the p6800 build (builds 1.6 and 1.6.1) - so stick with 1.5.1 until I fix this on the p6800, so Mobile services won't be available. I'll recompile the rom for the p6800 today.
13 Oct 2015
SlimLP Beta 0.9 - Build #1.6.1 - Build Date 20151013 - Download ROM from this URL
- New Stagefright security patch and October 1st Android Security patches (see Slim Gerrit changes for today for the latest list of changes)
- Bug in this build: P6800 rom missing RIL blob - mobile / data won't work
@6:43pm - p6810 build completed, uploading now.
@4:55pm - p6800 build 1.6.1 compiled, uploading now. Compiling the p6810 build now.
@4:00pm - i just noticed that the slimlp source just received the new stagefright security fix, i've synced the new source code updates and am compiling build 1.6.1, it also has the other Google security updates for October. Building p6800 rom now.
SlimLP Beta 0.9 - Build #1.6 - Build Date 20151012/13 - Download ROM from this URL
- Sources updated to SlimLP Beta 0.9
- Bluetooth built using Daniels new Bluetooth packages that allow Bluedroid and Bluez to co-exist
- Daniels USB-OTG update (from his sources)
- Bug in this build: P6800 rom missing RIL blob - mobile / data won't work
@3:08pm - p6800 build is up.
@2:20pm - p6800 build 1.6 compile completed. Uploading now (should be about 30min)
@8:23am - p6810 build 1.6 is uploaded
@8:20am - I'm uploading the p6810 build at the moment, then I'll start compiling the p6800 build
12 Oct 2015
- I've just downloaded SlimLP Beta 0.9 source code and sync'd Daniels latest device tries, starting on compile for the p6810 (Android 5.1.1_r20)
- I'm also going to test adding persist.sys.debug.multi_window=true to /system/build.prop - which might only be a Marshmallow (Android 6.0) setting, but I'll see if it works in 5.1.1_r20 of SlimLP Beta 0.9 source code
- I'm also going to test building Daniel's updated Bluetooth Package from his Github that allows it to co-exist with Bluedroid Bluetooth, rather then removing it.
- I haven't had any time to look at the Torch QS tile or the keyboard fault in the last two weeks, eventually I'll get onto those.
1 Oct 2015
SlimLP Beta 0.8 - Build #1.5.1 - Build Date 20151001 - Download ROM from this URL
- Modified /system/build.prop Davlik values again based on some more testing. dalvik.vm.heapgrowthlimit=64m. Previous build 1.5 tends to be laggy when launching multiple apps. You can test Build 1.5 and 1.5.1 and decide which settings give better performance if you like. If you know how to modify build.prop with root access, you don't need to reflash the rom, just set the Build.prop values.
@11:00am - p6810 build also uploaded.
@10:20am - p6800 build uploaded. p6810 build uploading now.
@9:17am - p6800 build compiled. Uploading. Compiling p6810 build now.
@8:00am - I think the new Davlik values are a bit excessive. I think increasing to dalvik.vm.heapgrowthlimit=64m, instead of dalvik.vm.heapgrowthlimit=100m, provides better responsiveness, but still enough for background apps like facebook (which uses around 60m of ram). For example, with the 64m value, opening a hyperlink from Gmail in Chrome works nicely, but at 100m, it's very laggy. My previous builds had this value set at 48m.
I think these values are better - I'll put a build 1.5.1 up soon, for those who want to try the different values (or you can manually set it yourself in Build.prop if your comfortable).
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=320m
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=2m
30 Sept 2015
SlimLP Beta 0.8 - Build #1.5 - Build Date 20150930 - Download ROM from this URL
- Updated Device Tree's from Daniel, Mobile Hotspot should be fixed for p6800 users
- GPS fixed
- Modified /system/build.prop Davlik values based on Article about Ram and Davlik settings, seems to be giving better performance, Games like Asphalt 8 seem to be smoother, more Ram seems to be generally available.
@7:14pm - p6800 rom uploaded
@6:34pm - p6800 build completed, uploading now, should be there in 30min
@6:15pm - P6810 Build #1.5 is uploaded. P6800 build still compiling..
@6:10pm - playing with Facebook installed in the background, dalvik.vm.heapsize=256m is more friendly for Facebook (dalvik.vm.heapgrowthlimit=100m is what helps Facebook to run more smoothly as a background process) in that games like Asphalt 8 are still playable with the 256m value, rather than dalvik.vm.heapsize=320m. But dalvik.vm.heapsize=320m / 384m is better for Real Racing 3 on High detail level, medium and low detail are fine with 256m.
@5:30pm - finished p6810 compile, uploading p6810 rom. Compiling p6800 rom now.
@3:35pm - doing a recompile of the p6800/p6810 with the adjusted Davlik VM settings, after which I will upload the rom's
@3:30pm - I finished my Davlik memory testing, I'm going with these values for my Build 1.5, a bit larger for the dalvik.vm.heapsize, as games like Real Racing 3 benefit from the larger value, and probably the Chrome Web browser does as well. The article recommended dalvik.vm.heapsize=174m, which is probably better if you have lots of smaller apps, but I'll optimize for some bigger apps using dalvik.vm.heapsize=320m. The dalvik.vm.heapgrowthlimit=100m seems to have given back more base memory, I can get over 460m of free Ram at times now.
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=100m
dalvik.vm.heapsize=320m
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
@8:35am - Test Build 1.5 - GPS works - so Non-Pie blob support is working again! Just testing the new Davlik memory settings now.
@8:00am - p6810 build 1.5 test build completed, if it's working ok I'll upload it as Build 1.5, otherwise I'll have to investigate why the Non-Pie support is not working.
29 Sept 2015
- 7:50pm - Starting build 1.5 for p6810 - will test to make sure GPS is working before doing p6800 build.
-I've manually updated the Bionic libraries with the Non-Pie support, as the Bionic libraries in SlimLP Beta 0.8 had more changes to them then just the non-pie support additions from the previous library which Daniel had given me, which was basically the same Bionic Library as SlimLP Beta 0.7 with the Non-Pie additions.
- Found interesting article on Davlik Heap values and ART https://01.org/android-ia/user-guides/android-memory-tuning-android-5.0-and-5.1 - I am going to test build my next one with their recommended settings to see the difference in performance (they say this benefits facebook as well due to the way it uses memory).
28 Sept 2015
- Looks like Daniel pushed another change to danielhk/proprietary_vendor_samsung_smdk4210 for the Hotspot after I did the Build 1.4 yesterday - https://github.com/danielhk?tab=activity - so I think that when I compile Build 1.5, this will hopefully fix the hostpot as well. I
- Build's 1.3 and 1.4 have issues with GPS again. I will have to do a recompile, it seems like the non-pie support was not enabled for GPS in those builds. Builds 1.1 and 1.2 the GPS works fine.
27 Sept 2015
SlimLP Beta 0.8 - Build #1.4 - Build Date 20150927 - Download ROM from this URL
- Updated Device Tree's from Daniel, Ambient Sensor should be fixed
- Mobile Hotspot doesn't seem to be fixed
- GPS has broken (non-pie support) - It has on my p6810 - will have to do a recompile for Non-Pie support that got missed some how
@10:15pm - The compile with CONFIG_KEYBOARD_SEC_DOCK=m or CONFIG_KEYBOARD_SEC_DOCK=n failed due to the fact that this causes other issues with the Kernel code. The code would need some adjustments to make this work for us. Anyway, I'll keep on investigating trying to turn the initial value to on for the Hardware switch in the Language and Input settings error. I checked Daniels omnirom build, and he's not turning on the hardware switch, so he must be specifically enabling the Touch Keyboard in the code even if a hardware keyboard is listed as present (I have seen some old code examples of people doing this, but some of the variables are not present in the SlimLP code - so I can't just copy their examples without finding the rest of the additional code needed).
@10:00pm - I got a reply from a Galaxy Tab 2 developer, he told me how they overcame this same issue, they got the commit included into Cyanogenmod to make the Keyboard Dock driver a module, so for anyone who needs it, the module can be started as an init.d module. I am doing a compile now to see if this fixes the keyboard driver, if so I'll make it build # 1.5...
http://review.cyanogenmod.org/#/c/83499/
espresso10: build KEYBOARD_SEC_DOCK as module Our sec_keyboard driver does not properly unregister the input device when no dock is detected, which makes the system believe that a physical keyboard is present at all times, which prevents the software keyboard from being shown. Some user own a Keyboard-Dock and meight miss the ability to use the dock if it gets disabled completely. Building it as module gives the user the ability to add a simple init.d script to start the module at boot if they need it.
/kernel/samsung/smdk4210/arch/arm/configs/cyanogenmod_p6800_defconfig
Code change CONFIG_KEYBOARD_SEC_DOCK=y -> CONFIG_KEYBOARD_SEC_DOCK=m
/kernel/samsung/smdk4210/arch/arm/configs/cyanogenmod_p6810_defconfig
Code change CONFIG_KEYBOARD_SEC_DOCK=y -> CONFIG_KEYBOARD_SEC_DOCK=m
@9:41pm - p6800 build compiled, uploading now.
@7:47pm - p6810 build compiled and uploading, building p6800
SlimLP Beta 0.8 - Build #1.3 - Build Date 20150926 - Download ROM from this URL
- SlimLP Source code updated to Beta 0.8
- GPS has broken (non-pie support) - It has on my p6810 - will have to do a recompile for Non-Pie support that got missed some how
@3:04pm - p6800 build 1.3 uploaded. P6810 build 1.4 commenced.
@2:35pm - resetting Code base and Resyncing Daniels Device Library changes for Build 1.4 (Hotspot fix and Ambient Display fix)
@2:30pm - P6800 SlimLP Beta 0.8 build finished, uploading now (build 1.3)
@ 8:00am - P6810 SlimLP Beta 0.8 build finished and uploaded. Building P6800 rom. (My Rom build # 1.3)
- I've just looked at Daniels new Omnirom Change Log for 20150926 build and his new sources (which came out just after I started this new build) fixes the Wifi Hotspot and the Ambient Display issues. Once the first build of Beta 0.8 is compiled, I'll resync my Sources to get his updates and then build 1.4, which will include these fixes.
26 Sept 2015
5:30pm - I've just updated my SlimLP code base to Beta 0.8, and am recompiling my p6810 build. I'll leave it compile tonight and compile a p6800 build after that.
Next week I'll keep on tracking down this Soft Keyboard bug, where it's not initially enabled (I'm only going to try set the initial Toggle value to on - not try and resolve the false positive on the driver believing that there's a keyboard docked).
5:00pm - My testing has confirmed that this code only removes the hardware option (set to false and the hardware option re-appears), it doesn't set the hardware toggle to on. But I might be able to use this bit of code to help me start to find the option. I just need to find where the Default Value of this toggle switch is set, and then adjust the default to be turned on, instead of off.
2:30pm - I just had a chance to test the build, the value of config_forceDisableHardwareKeyboard = true, completely hid the Hardware option from the Input and Settings area, preventing the value from being changed. I am just trying a test build with the value of False, but I don't think this is going to turn on the value.... I'll have to try see if I can find where the Hardware Setting is kept (probably in the same part of the code) and work on some sort of fix.
8:30am - I've made a p6810 test build to see if it fixes the keyboard. I'll test it later today as I have to go out now.
I've set the config_forceDisableHardwareKeyboard to true via an overlay file (which overrides the default value of false - which I believe turns off the fix and makes things behave as if the extra code was not included). From what I understand from my reading, the keyboard issue is present because the default driver is wrongly reporting that a Keyboard dock is present. Which if you plug in a keyboard via usb, you see that it behaves like one is, the softkeyboard just gives you word predictions on screen, but no keyboard. So I think that is right. Changing that Hardware option in input corrects this wrong assumption and then the soft keyboard appears.
25 Sept 2015
10:43pm @ I think i might have found some code to fix the soft keyboard not working at startup issue at https://gerrit.omnirom.org/#/c/903/2
Edit: Looking over Cyanogenmod code, they have already implemented this fix, but SlimLP hasn't added it to their code base, so I have added it to the source code and am doing a compile now. The only thing I think I need to work out is if I need a true / false value for the config_forceDisableHardwareKeyboard parameter, but once I have that worked out, hopefully this should fix it.
24 Sept 2015
SlimLP Beta 0.7 - Build #1.2 - Build Date 20150924 - Download ROM from this URL
- Media DRM fixed for Google Play Movies / Youtube DRM based content (libraries from p3100)
- increased dalvik.vm.heapsize=320m - Hopefully should provide a bit more memory for Facebook / Facebook Messenger
@9:30pm - p6800 build is uploaded
@8:43pm (10:43am GMT)- Compile finished for p6800, uploading now
@7:00pm - Build #1.2 - Compiled p6810 build and am uploading. Compiling p6800 build
@10am - I fixed the Play Movies streaming issue. Using libdrmdecrypt.so from p3100 (https://github.com/TheMuppets/proprietary_vendor_samsung/tree/cm-12.1/p31xx/common/system/lib) - goes in the /system/lib, also the three libwv*.so files from (https://github.com/TheMuppets/proprietary_vendor_samsung/tree/cm-12.1/p31xx/common/system/vendor/lib) in the /system/lib folder, the libdrmwv...so file from (https://github.com/TheMuppets/propr...ee/cm-12.1/p31xx/common/system/vendor/lib/drm) in the /system/lib/drm folder and finally, in /vendor/lib/mediadrm (the vendor folder should really be a link to /system/vendor, not a seperate folder as it currently is in our builds), the libwvdrmengine.so from (https://github.com/TheMuppets/propr...-12.1/p31xx/common/system/vendor/lib/mediadrm).
- Next build if I will try incorporate this fix
23 Sept 2015
- I was having a bit of a play last night with Google Play Movies, as to why it doesn't stream. It seems that Lollipop (as compared to kitkat) requires /vendor/lib/mediadrm/libwvdrmengine.so and possibly a few other components. I have gotten a copy of this file from the exynos 4412 smdk files, but there are a few more components missing (this might not even be compatible with our exynos 4210 but its worth a try). But with this file in place, it no longer gives the device is unsupported message, it tries to start streaming and errors out. I had a quick look in the log and I think it also wanted another crypto .so driver file, so I'll see if I can find that driver as well. There's a large collection of samsung blobs at https://github.com/TheMuppets/proprietary_vendor_samsung
20 Sept 2015
- 1:25pm - 3:25am GMT - I tested GPS on my P6810 (wifi model) and it now works!
- 7:51am - 9:51pm GMT - p6800 build is uploaded.
Daniel has given me some feedback on the i815 and some other things I was wondering about, so I'll go read over his instructions and my code some time next week and see if I can work this out. Once I have it compiling i'll make an update. Thanks @daniel_hk
- 7:24am - 9:24pm GMT - uploading p6800 build. It should be there in the next 20 minutes.
19 Sept 2015 - 11:18pm - I've uploaded the P6810 build of the rom, I'm waiting on the p6800 build to finish compiling - going to sleep now, so that will probably be in the morning. I've had a report from a tester that the Package Installer was crashing on the p6800 build when trying to manually install an APK package. I haven't had this happen on my P6810 build, so if someone can test the new build and let me know if this is an issue still that would be great.
SlimLP Beta 0.7 - Build #1.1 - Build Date 20150919 - Download ROM from this URL
- Rebuilt rom with Bionic Library supplied by Daniel that has Non-Pie Blob / Driver support
- GPS working
- Manually copied RIL Libraries into /system/lib folder from Daniels latest Omnirom Build - Hopefully for the p6800 this should enable RIL / Sim Card support - Files copied from Omnirom build are as follows:
/system/lib/libreference-ril.so
/system/lib/libril.so
/system/lib/librilutils.so
/system/lib/libsecril-client.so
/system/lib/libsecril-client-sap.so
/system/bin/rild
19 Sept 2015 @ 7:14am - Checked my PC this morning and it failed with the same compile error again for the i815. I'll have to keep on looking.
18 Sept 2015 @7:55pm - 9:55am GMT - Clearing out my build folders to try a fresh compile of the i815 code in case some of the p6800/p6810 build code is causing issues. I'll probably post an update tomorrow on how this went. Once I can compile the i815 code properly, I'll start looking at the other issues.
Update: 10:48pm - it may have gotten past the error below now, during the build I noticed the following in the output... still a number of hours to go before the i815 compile finishes.
Code:
build/core/Makefile:46: warning: overriding recipe for target '/home/peter/android/slimlp/out/target/product/i815/system/lib/hw/sensors.exynos4.so'
build/core/base_rules.mk:550: warning: ignoring old recipe for target '/home/peter/android/slimlp/out/target/product/i815/system/lib/hw/sensors.exynos4.so'
15 sept 2015 @10:42pm - 12:42am GMT - My compile of the i815 code hit an error, I'll have to track it down tomorrow if I get a chance
Code:
make: *** No rule to make target '/home/peter/android/slimlp/out/target/product/i815/obj/SHARED_LIBRARIES/libinvensense_hal_intermediates/export_includes', needed by '/home/peter/android/slimlp/out/target/product/i815/obj/SHARED_LIBRARIES/sensors.exynos4_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
15 sept 2015 @5:38pm - 7 :38am GMT - p6800 rom uploaded
Around 7hr 15 min for my old e5400 CPU to compile the 21gb of output per device specific folder to build the p6800 rom (there's a common output, and then device specific output). I'm just about to start the i815 build... just moving my cm12.1 code folder off the drive to an external disk so I have enough room to build the i815 rom.
15 Sept 2015 @ 10:52am - 12:52am GMT - I've uploaded the p6810 rom, I'm currently compiling the p6800 rom and when that's done I'll compile an i815 rom
SlimLP Beta 0.7 - Build #1.0 - Build Date 20150915 - Download ROM from this URL
- Built from SlimLP Beta 0.7 Sources
- Bluetooth Fixed
- OpenGL ES values set to 2.0 values in /system/etc/build.prop
- Davlik VM settings adjusted to possible better values
- Compiled from Daniel's Github sources - check the local_manifest.xml to see which sources where used
- GPS and ASOP keyboard bugs still present, QS tile for torch not working.
- Google Play Movies only work if you download locally first then play, not streamed - I have tested this on other Android 5.1.1 roms on my p6810 and it's the same on all of them at the moment.
- GPS.exynos4.so (GPS driver) from Galaxy S2 i9100 / CM 12.1 rom in this build (it may or may not work with our Exynos 4 processor, but it's a PIE build of the GPS blob for Exynos 4, which means that I didn't need to modify the BIONIC libraries for Non-Pie support). I've uploaded the GPS exynos 4 blob to my Androidhost.com folder for Slim as well - Next build I try for my p6810, I'll use Daniel's older GPS blob's and enable non-pie. However with this PIE based GPS blob, I don't get any GPS Client communication errors / socket not open errors. So I might simply need a different gps config file for this to work
GApps:
Official SlimRoms GApps

Questions and Answers
Testing- Just a note at the moment, I only have a p6810 (wifi only model) so my testing is limited to this. I am compiling p6800 and i815 rom's based on @daniel_hk's github source tree's, doing the modifications that I do for my p6810 to compile. So if you want to test and let me know about p6800 and i815 issues that would be great
i815 - Hopefully in a week or two I'll have time to make a build once I sort out a compile error. Daniel's given me some feedback, I just need to find some time to look over it.
QS Torch - I'll try work out the code for this QS torch tile setting soon
Memory Settings - Interesting article on Davlik Heap values and ART on android 5.0 and 5.1 https://01.org/android-ia/user-guide...id-5.0-and-5.1. Give me some feedback on performance as i still think we can tweak ram a bit more.
No time frames on anything, I'll just do what I can when I can.

Sim card not detected
I tried the new rom on p6800 with no sim card error.

Thanks for reporting back, at least I know that it boots on the p6800. Next build I do for the p6800/p6810 I'll be enabling the Non-PIE blob support which should help with some of the older driver libraries for things like GPS and possibly the RIL library which might fix this error for you as well.

hot spot not working on p6800
dear sir,
I just flash the new 1.1 rom on p6800. Every thing was fine except the hotspot.
My phone can detect the hot spot by p6800, but cannot get connected.
Thank you so much for such a great works.

Wait so is beta 0.7 the newest or alpha 1.1
On beta0.7 now and very smooth

philipnzw said:
Wait so is beta 0.7 the newest or alpha 1.1
On beta0.7 now and very smooth
Click to expand...
Click to collapse
Beta 0.7 is the slim ROM teams designation of their ROM build status. Alpha 1.1 is just my own designation to say it's my test builds, that being my second build, once I have the bugs sorted I will call it stable.

p3dboard said:
Beta 0.7 is the slim ROM teams designation of their ROM build status. Alpha 1.1 is just my own designation to say it's my test builds, that being my second build, once I have the bugs sorted I will call it stable.
Click to expand...
Click to collapse
Aha
It's quite stable already

philipnzw said:
Aha
It's quite stable already
Click to expand...
Click to collapse
I've changed my personal Labelling to Build #, instead of Alpha, that way its less confusing

p3dboard said:
Questions and Answers
QS Torch - I'll try work out the code for this QS torch tile setting soon
Click to expand...
Click to collapse
i think this could be an issue with slimroms in general.
it wasnt working on slimbean last time i tried it and its currently not working on slimkat either. (im on daniels slimkat)
p3dboard said:
Automatic Brightness Sensor - Have to do some more testing - Turning off Automatic Brightness, allows for a greater range of brightness
Click to expand...
Click to collapse
this issue is also present on daniels CarbonLP for me. either its related or somethings wrong with my p6800 thats duplicated on your p6810.
even tho its stable according to some, i think ill wait for a gps update before trying this out.
its times like these i wish we could have the dual/multi boot functionality.
way better and easier for the community to help test out the new/experimental builds.
especially for people like me whos using the p6xx as a daily driver.
good luck to you sir.

HM i will try it and lett you know how it go on my P6800,the lollipop 5.1.1 from daniel,i dont know what is wrong,when the wi-fi is turned on,i cann not tell you how much the difference in performance is,when i turn it on,it become laggy unbearably,so i will check with this................

Still holding up well after installing some xposed modules
Turning on awesome player seemed to help with YouTube crashing randomly
Also, uploading a picture with fb messenger app crashes everything (need to hold down power button)
Think Daniel's roms didn't have this issue.

I might need to increase the maximum memory amount for apps in the Build.prop,i set it to 256m, the default is 384m, but i dropped that lower as when some apps got to that size the rom's can become sluggish. I have had another app (real racing 3) lock up while trying to upload a game profile. I will play with the values some more. These are set in the build.prop file under /system/etc i have posted about them before in one of the other rom threads. If you are comfortable playing with the settings you could put them back to stock values and see if that fixes things for you and you can let me know. Thanks, Peter

Lag
p3dboard said:
I might need to increase the maximum memory amount for apps in the Build.prop,i set it to 256m, the default is 384m, but i dropped that lower as when some apps got to that size the rom's can become sluggish. I have had another app (real racing 3) lock up while trying to upload a game profile. I will play with the values some more. These are set in the build.prop file under /system/etc i have posted about them before in one of the other rom threads. If you are comfortable playing with the settings you could put them back to stock values and see if that fixes things for you and you can let me know. Thanks, Peter
Click to expand...
Click to collapse
Something to REPORT,i dont know it this just on my tab or not,but,it doesn't matter do i use CyanogenMod 12 or Carbon,or this SlimLP,yesterday wehn i instaled Carbon,after 30min when i installed all my apps,the last one that i installed was Facebook,and when i set it,then it become unbelievably Lagg,and i then installed SlimLP,and didnt installed other apps just Facebook,and this Lagged to,just now it just restarted alone.......................is this just because of FB or what is it,i just cann not take it any more,when i see it,the best android was 4.0.1

Definitely Lollipop rom's are more memory hungry than Kitkat Rom's. I am enquiring with one or two other rom maintainers who say they have implemented some optimizations for devices with 1 Gb Ram, to see what changes they are adding to improve performance. So far the best performing Rom i find is still Slimkat 8.2, Android 4.4.4, but it maybe possible to tweak lollipop for better performance. I have read on the Galaxy s2 forum that Facebook is an app with issues on the s2 CyanogenMod 12.1 rom as well. I will do a bit of testing and hopefully with some input from some others we might be able to fix this, we really need a lollipop rom with low memory overheads. Have you tried Facebook on Daniel's omnirom builds? They are the closest to stock Android, and may work better
Edit: i just installed Facebook on my s2 phone with CyanogenMod 12.1 (Android 5.1.1) and it seems to be ok, just wanted to test it on another 1gb ram device. The s2 has about 20mb more usable ram than our galaxy tab 7.7 due to lower screen resolution. Anyway, we will see what we can do to try improve things, a bit of trial and error,playing around

p3dboard said:
Definitely Lollipop rom's are more memory hungry than Kitkat Rom's. I am enquiring with one or two other rom maintainers who say they have implemented some optimizations for devices with 1 Gb Ram, to see what changes they are adding to improve performance. So far the best performing Rom i find is still Slimkat 8.2, Android 4.4.4, but it maybe possible to tweak lollipop for better performance. I have read on the Galaxy s2 forum that Facebook is an app with issues on the s2 CyanogenMod 12.1 rom as well. I will do a bit of testing and hopefully with some input from some others we might be able to fix this, we really need a lollipop rom with low memory overheads. Have you tried Facebook on Daniel's omnirom builds? They are the closest to stock Android, and may work better
Click to expand...
Click to collapse
no,i didnt try omnirom,i just used Daniel's Cyanogenom and Carbon,and this Slim,but when i charge my p6800 i will instal omni and try it.

LeonardoD93 said:
no,i didnt try omnirom,i just used Daniel's Cyanogenom and Carbon,and this Slim,but when i charge my p6800 i will instal omni and try it.
Click to expand...
Click to collapse
Might wanna try fb lite
Always avoided the main app on lollipop roms,after fb the whole system just lags like mad
Fb lite is like a smaller version of the main app,the user interface is absolutely horrible,but hey it works~

Just letting you all know that I have a fix for the Google Play movies not streaming DRM based content. I've posted about it in my Change Log.

philipnzw said:
Still holding up well after installing some xposed modules
Turning on awesome player seemed to help with YouTube crashing randomly
Also, uploading a picture with fb messenger app crashes everything (need to hold down power button)
Think Daniel's roms didn't have this issue.
Click to expand...
Click to collapse
I just tested Facebook Messenger with the davlik memory value set at 320m, and it uploaded a photo fine in my test, no crash. So it may be a memory limitation. SlimLP seems to be lighter on Ram, it may even be ok with 384m, but 320m seems to working ok for me. Next build, I'll increase the /system/build.prop Ram value to at least 320m, possibly 384m.