[Q] Back damaged due to flip case? - One (M7) Q&A, Help & Troubleshooting

Hi everybody!
The past 3 months, i've been the proud owner of an HTC one, but something has been bothering me for some time now: even though i am very careful with my phone and keep the case on it at all times, the back has accumulated quite a lot of small 'craters'. These only seem to appear where the back should be protected by the hard part of my official htc one double dip flip case. I have checked time and time again if there was any sand in between, and there never was any, nor was there anything else in there.
I will try to post a decent picture later on, but i was wondering: what should i do? Do i have any chance to get a new device?
Click for pic
Thanks in advance,
Jeroen

JeroenVH said:
Hi everybody!
The past 3 months, i've been the proud owner of an HTC one, but something has been bothering me for some time now: even though i am very careful with my phone and keep the case on it at all times, the back has accumulated quite a lot of small 'craters'. These only seem to appear where the back should be protected by the hard part of my official htc one double dip flip case. I have checked time and time again if there was any sand in between, and there never was any, nor was there anything else in there.
I will try to post a decent picture later on, but i was wondering: what should i do? Do i have any chance to get a new device?
Click for pic
Thanks in advance,
Jeroen
Click to expand...
Click to collapse
Have had the same problem, it occurred when a few bits of debris got behind it., load of crap and I would avoid it.

dladz said:
Have had the same problem, it occurred when a few bits of debris got behind it., load of crap and I would avoid it.
Click to expand...
Click to collapse
Avoid trying to get a new one or just that ****ty case?

You should use a TPU case. I got myself the Cimo one. It's flexible and offer all around protection, except for the speaker grills. Just clean it inside as a precaution before putting your phone in there. Your flip case obviously got some debris inside which pressed against the soft aluminium back of the phone when you closed it and put it in your pocket or bag.

electronical said:
You should use a TPU case. I got myself the Cimo one. It's flexible and offer all around protection, except for the speaker grills. Just clean it inside as a precaution before putting your phone in there. Your flip case obviously got some debris inside which pressed against the soft aluminium back of the phone when you closed it and put it in your pocket or bag.
Click to expand...
Click to collapse
I decided to go for a little more protection and ordered myself the UAG navigator It'll take some weeks to get here though, so hopefully my back plate won't be screwed up entirely by then :/
Does anybody know if it's posible to polish it out a bit, etc?

Better use otterbox commuter series for better protection.
Sent from my HTC One using xda app-developers app

rerenznz said:
Better use otterbox commuter series for better protection.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I just did that last night. The OtterBox Commuter has the best protection v/s slimness.I got myself the black one. I really wanted the Glacier model but the colors in reality do not match what you see in the rendered pictures. The light grey is actually absolutely white and the darker grey is actually light grey. I don't want a white case as my phone is black for a reason - no worries about dust, etc making it look dirty.
http://www.otterbox.com/HTC-One-Com..._htc4-one_color=20&start=1&cgid=htc-one-cases

JeroenVH said:
Avoid trying to get a new one or just that ****ty case?
Click to expand...
Click to collapse
Avoid the case, it's crap. I've got the double dip too which has been fine although some people have said that it also has scratched their One, so take care with it.
A silicon case is obviously the safest choice but then again it's not going to be the prettiest either.
I've actually not got anything on mine at all now, I love the aesthetics of the phone and putting a case on it is just going to spoil that.
Have never dropped it yet (touch wood) and if I ever break it then i'll just get another one anyway so not really bothered too much.
PS: The urban cases are pretty good, you should check them out if youre looking for something rugged and decent looking.
http://www.urbanarmorgear.com/collections/htc-one

dladz said:
Avoid the case, it's crap. I've got the double dip too which has been fine although some people have said that it also has scratched their One, so take care with it.
A silicon case is obviously the safest choice but then again it's not going to be the prettiest either.
I've actually not got anything on mine at all now, I love the aesthetics of the phone and putting a case on it is just going to spoil that.
Have never dropped it yet (touch wood) and if I ever break it then i'll just get another one anyway so not really bothered too much.
PS: The urban cases are pretty good, you should check them out if youre looking for something rugged and decent looking.
http://www.urbanarmorgear.com/collections/htc-one
Click to expand...
Click to collapse
I just got my confirmation that the case has been sent
In 10 days, i won't have to worry anymore

Related

Screen Protection

Does anyone use the screen covers or anything like it? Or does anyone think its pointless? Need some guidance on what to do. Thanks!
professortrev said:
Does anyone use the screen covers or anything like it? Or does anyone think its pointless? Need some guidance on what to do. Thanks!
Click to expand...
Click to collapse
i didn't think i did when i got my first g1 but then my jeans put a few small scratches in the screen so when i got second phone a week ago i ordered the ZAGG invisibleshield for it, i haven't gotten it yet but should tomorrow or the next day, but i would definitely recommend getting one.
The absolute best protector I've ever used is the one made by Seidio. It's a dry install and the film is as smooth as the screen itself. I've also used the Zagg Invisible Shield..it's nearly inpenetrable, but it takes away much of the smoothness of the original screen, so your finger won't glide as smoothly. It's texture is also very much like orange peel. Also, you have to use a wet method to install this...it's not really a big deal, but some are weary of taking the risk.
Right now, I'm using the Clear Protector, which is a lot like Zagg, but smoother in texture. Kind of in between the two. Definitely closer to the Zagg though, and the install is done the same way.
For what it's worth, I've thought about it a lot recently. I'm so anal, that if any part of my phone got beat up i'd be irritated and looking to replace it. So if it falls hard enough to scratch the screen either way, it'll probably be getting replaced shortly thereafter... but I also have a dedicated pocket where I don't put anything in with my phone, so I don't have to worry about things like key scratches.
Cliff's notes: You probably don't need one if you're like me...but if you're not, look at the Seidio or Clear Protector.
@uansari1 completely off topic, but i noticed that i can't get the stock cupcake download off of google's code page, so thank you for uploading it somewhere else
i use the screen protectors from tmobile for the mt3g on my g1. they fit perfect and work really well. 10 bucks for 2 was a little steep i thought, but i got to cover both my g1's so it was worth it!
david1171 said:
i didn't think i did when i got my first g1 but then my jeans put a few small scratches in the screen so when i got second phone a week ago i ordered the ZAGG invisibleshield for it, i haven't gotten it yet but should tomorrow or the next day, but i would definitely recommend getting one.
Click to expand...
Click to collapse
I have the ZAGG full body cover. It's not bad. The protection is great, it ever saved me from cracking my screen a few times butcause of the way it's bonded. The only things I don't care for is the fact that it kinda looks like an orange peel, (you understand when you put it on), and your fingers stick to, rather than glide across the screen.
david1171 said:
@uansari1 completely off topic, but i noticed that i can't get the stock cupcake download off of google's code page, so thank you for uploading it somewhere else
Click to expand...
Click to collapse
You're welcome.
Thanks everyone for their input. I think I'm going to get the Seidio one.
Anyone use their case?
http://www.seidioonline.com/product-p/csr2tmg1-bk.htm
s15274n said:
Anyone use their case?
http://www.seidioonline.com/product-p/csr2tmg1-bk.htm
Click to expand...
Click to collapse
its o.k. it adds noticeable bulk
s15274n said:
Anyone use their case?
http://www.seidioonline.com/product-p/csr2tmg1-bk.htm
Click to expand...
Click to collapse
Make sure you read the directions... Seidio puts a nice tab on their protectors to make installation a breeze. Just make sure your screen is totally dust-free first.

Review: U-BOP BoldFLEX Silicone Skin for HD2

Hi all,
My new silicon case just arrived.
If you're wondering, or looking, it's this one.
I thought I give a small review
Ordered the case via U-Bop's Amazone shop on dec 10, arrived today dec. 17. Not bad for normal airmail shipping I guess. total price 11,23£ shipping included.
Now, about the case:
Grip feels good, not slippery but the nice feel of rubber but a little smoother.
All cut-outs seem ok, there's enough room in the front for all sensors located around the speaker on the top. I was a bit scared that the bottom "rounding" would interfere when you try to use the hardware keys but that is ok*.
On the left side, where your volume buttons are, the case has a special bevelled surface so you still feel where the buttons are. Very nice touch I think making it easy to find the volume buttons without have to make a cutout for the buttons which would result in another dust-gathering trap
The down side of things then: although the case is advertised as being "skin-tight" and "form-fitting" the truth is: it sits to loosely to my liking. I would think that if you make something that is supposed to be form-fitting and skin-tight etc then it would need at least some effort to slip my HD2 in there and it would be as tight as .... well think "men in tights" (was the first thing that slipped in my mind) ...
Honestly. I think if I drop my phone it would be well protected for the first bounce.... but I'm scared it might just be thrown out of the case on impact!
It just feels a bit to 'light' and not much of the tight etc is noticeable.
Another small think I immediately notices was that the moment I had slipped it on and carried it around for a few hours in my pocket, dust appeared out of nowhere, clinging on to my screen where I had never seen it before?!? Strange as I always carry it in my pocket and I can't really remember ever having dust there that clearly... I'll see if that clears after a few days use.
I took some pictures and a small movie to give a general idea of what I mean.
So overal:
the PRO's
- good feel
- anti slip
- drop protection (100% for the first impact... guess % goes down with each consecutive bounce )
- all sensors, camera, flash leds, 3.5mm jack and micro USB are reachable
- volume keys can still be located through touch feeling
- cheap
the CONS
- not at all skin tight as advertised
- dust-magnet?
hope you liked the review. I'm interested en opinions of people using other types of silicon cases that do feel skin tight and secure so let me know what you have!
link to youtube for the movie : http://www.youtube.com/watch?v=YZ3fMmOg-zs
Thanks for the review. It looks cool for the most part other than it's not skin tight...
To be honest, I'm getting more and more dissatisfied by the day
Taking the phone out of the pocket is a sure way to get at least 1 corner of the silicone case dislodged from the phone. Sometimes even the two top corners come off so you end up fetching the phone without case
And I can also confirm that the case is a dust magnet in the meantime... so no good there either...
I think I will be filing for the 14 day money back guarantee on this one and trying another one...
DicE
galaxys said:
Thanks for the review. It looks cool for the most part other than it's not skin tight...
Click to expand...
Click to collapse
Yep I'd have to agree 100% with your review, bought one of these cases on ebay and initially thought it was good, but as you say it's not skin tight it's more "underpants tight"...so the case does come off sometimes when you take the phone out of your pocket as it sticks to your pocket...and if you are looking for a static dust magnet this wouldn't go amiss...
Just an idea guys, but does silicone shrink when exposed to heat? If so, you could try bathing it in hot water to shrink it a little... ?
Grtz
Lukas
shrink? you sure about that? Haven't tried that.
case could do with a wash though since it has been sucking in dust like a black whole for the past couple of days so... let me give that a try
If we're sure of one thing then it's that it wont break the case
DicE
Lukasss said:
Just an idea guys, but does silicone shrink when exposed to heat? If so, you could try bathing it in hot water to shrink it a little... ?
Grtz
Lukas
Click to expand...
Click to collapse
DicEvsTytnII said:
shrink? you sure about that? Haven't tried that.
case could do with a wash though since it has been sucking in dust like a black whole for the past couple of days so... let me give that a try
If we're sure of one thing then it's that it wont break the case
DicE
Click to expand...
Click to collapse
Did you try it? Coz now I'm curious myself...
Lukasss said:
Just an idea guys, but does silicone shrink when exposed to heat? If so, you could try bathing it in hot water to shrink it a little... ?
Grtz
Lukas
Click to expand...
Click to collapse
I very much doubt it will shrink. They use silicone like this as baking trays!!

Case-Mate Barely There Review

Hi, first of all this is my first review at all
I´ve to say that this is in my opinion the best way to protect the camera and so save the smart design of the beloved hd2.
but ... there are some bad points I wanne mention,
if you want a case that you put on once and never/only a few times pull off, this is your way,
but if you do it like me peal off every day to put in a cradle you have to face some scratches on the original rubber on the hd2.
For me it was clear that i´ve to protect the camera and still have a sleak design.
The Case itselve comes in a plastic box with some micro fiber cleaning cloth and a screen protector.
There are no edges or bur that could hurt the hd2.
The whole case is covered with a rubber finish just like the hd, but i dont think so resistant (no scratches jet).
The screen protection is not so good, after two days there are a lot of scratches on it, so maybe I´ll peal it off.
It fits the screen nicely and there are no issues with the aproximate sensor
Here are some pictures right from germany to you
How did you manage to scratch the screen protector? What are you writing with?
yea ... thats the big question.. I´m writing with my fingers and this protector get scratched, many many little ones, but there are even big scratches on it, think my pocket does this.... by the way only the phone in pocket... I´ll take a picture for u
That scratch on the corner of your HD2, is it from pulling the case off and on multiple times? It looks pretty ugly that scratch, but case looks very nice.
I think many of us have a need sometimes to pull it down becose sometimes we must reset it by pulling the battery out :\
Smartmob said:
That scratch on the corner of your HD2, is it from pulling the case off and on multiple times? It looks pretty ugly that scratch, but case looks very nice.
I think many of us have a need sometimes to pull it down becose sometimes we must reset it by pulling the battery out :\
Click to expand...
Click to collapse
yes its from pulling on and off, but i think its not soooo ugly cause you dont see it if case is on
for me its more important to cover the camera
Smartmob said:
That scratch on the corner of your HD2, is it from pulling the case off and on multiple times? It looks pretty ugly that scratch, but case looks very nice.
I think many of us have a need sometimes to pull it down becose sometimes we must reset it by pulling the battery out :\
Click to expand...
Click to collapse
I've got the Silver mirror-finish version of this case - it's very nice
Might add however that it's ridiculously snug - just got it today and now having trouble trying to get the case off
Is there a reason as to why Case-Mate states it will only fit the International version? Not the soon to be released Tmobile version?
Sheldonjace said:
Is there a reason as to why Case-Mate states it will only fit the International version? Not the soon to be released Tmobile version?
Click to expand...
Click to collapse
I believe the intl version is a tad taller if I'm not mistaken...
I have the case as well (silver version). The case looks really sleek on the HD2. Nice and slim just what I want.
However I find it extremely difficult to take it off. It's just too tight. Any tips to take it off?
luffyp said:
I have the case as well (silver version). The case looks really sleek on the HD2. Nice and slim just what I want.
However I find it extremely difficult to take it off. It's just too tight. Any tips to take it off?
Click to expand...
Click to collapse
remove it often and it will be easier
I just ordered one silver chrome and a leather case. Cant wait to see them
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=370334220926&ssPageName=STRK:MEWAX:IT
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290389814273&ssPageName=STRK:MEWAX:IT
Oh, Im having trouble to remove this case off also. For the 1st time, it already scratch the rubber on my HD2. Really looks ugly. I love the look of this case, but I dont want my HD2 to have scratch. Should I return it?
KPatrone said:
I believe the intl version is a tad taller if I'm not mistaken...
Click to expand...
Click to collapse
Actually it is the t-mobile version that is about 1/4 " taller and maybe even a hair thicker at the top.
Bababooey said:
Actually it is the t-mobile version that is about 1/4 " taller and maybe even a hair thicker at the top.
Click to expand...
Click to collapse
Yup, its a bummer I had ordered my case before getting the phone. O well, same exact thing happened when tmobile released the touch pro2. I order my protection before the phone because I dont want anything to happen to it, but then my protection ends up not fitting : (
wonder when they will be releasing the one for TMOUS
vikramdhani said:
wonder when they will be releasing the one for TMOUS
Click to expand...
Click to collapse
why is this one some milimeters bigger?
the hardware is the same or is there some "dead man switch" build in ?
if u dont pay your bill it will blow up xD
Thanks for sharing! It looks good except the corner =)
NightFire123 said:
why is this one some milimeters bigger?
the hardware is the same or is there some "dead man switch" build in ?
if u dont pay your bill it will blow up xD
Click to expand...
Click to collapse
Do some research.
nuron said:
Do some research.
Click to expand...
Click to collapse
T-Mobile HD2 is 1.5mm taller. Seems to be because of the logo on top. For gel/silicone cases it might not be a problem, but for hard cases and fitted cases - it is. It does not fit.
Barely any fingernails left!
I purchased the black rubber version and it is very unobtrusive and tight fitting - but that's my problem - it's too tight. I feel I am in more danger of damaging my phone trying to remove this case than actually dropping it! I am considering cutting slits in the four corners of this case to make removal easier.It's a pity because I really like the look of the case itself.
Alan

Metal bezel and scratches

The Nexus 4 is very likely to be my next phone, replacing my old HTC Desire. Anyway, I have one big concern about the new Nexus.
I have had a LG Device once. It also had a silver-shiny bezel, just like the nexus 4. And exactly this bezel attracted scratches like a magnet. You could barely look at it without producing a scratch. It was kind of like the backside of the old iPod touches (if you know what I mean).
Sounds weird, but this is my biggest concern about the phone till yet. I don't want to have a phone which is scratched all over immediately...
Just my thoughts, anyway....
Seriously?
seriously.Probably sounds a bit crazy, but I have had a really worse experience with this. The mentioned older LG device with the metal bezel looked really awfull after few weeks of usage (and I really took care of where I put it etc.)....like it's been used for a few years already...
theoneofgod said:
Seriously?
Click to expand...
Click to collapse
He has forsaken the worship of Google and expressed an independent thought doubting the perfection of this device! BURN HIM
Seriously though don't those who have handled it say the outside is soft? It sounds like some sort of rubbery plastic not metal. Could be wrong.
Get a case/bumper
eep2378 said:
Get a case/bumper
Click to expand...
Click to collapse
don't think that'd work out for the front of the device...but even if, I'm not a fan of cases at all, why should I buy a many-hundreds-of-dollars/euros-device and than put it into a case for a few dollars/euros? My old phone survived my jeans also pretty well, the screen hasn't any spotable scratch - and it isn't even gorilla glass or anything comparable...
Perfect example of one of the many things duct-tape can fix.
I have no idea how easily the Nexus 4 will scratch. Guess we'll find out.
I don't think its metal, looks like plastic with chrome paint, but yes if metal it can get dings like the iPhone5.
I've also read that it's a rubbery feeling plastic which doesn't seem like it's scratch too easily.
Sent from my PG86100 using Tapatalk 2
eksasol said:
I don't think its metal, looks like plastic with chrome paint, but yes if metal it can get dings like the iPhone5.
Click to expand...
Click to collapse
platic with that chrome paint thing is even worse, it's just like butter. Metal is far better in that kind of stuff, the Desire's frame is some kind of painted metal, too. Got 2 noticable scratches in there, though, but that's not too bad for like 2 and a half years of daily usage with no case...
EDIT:
sporez said:
I've also read that it's a rubbery feeling plastic which doesn't seem like it's scratch too easily.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
I think that only counts for the black plastik frame, not the silver one
haloimplant said:
He has forsaken the worship of Google and expressed an independent thought doubting the perfection of this device! BURN HIM
Seriously though don't those who have handled it say the outside is soft? It sounds like some sort of rubbery plastic not metal. Could be wrong.
Click to expand...
Click to collapse
Indeed. Like all other phones are indestructible.
Nascor said:
don't think that'd work out for the front of the device...but even if, I'm not a fan of cases at all, why should I buy a many-hundreds-of-dollars/euros-device and than put it into a case for a few dollars/euros? My old phone survived my jeans also pretty well, the screen hasn't any spotable scratch - and it isn't even gorilla glass or anything comparable...
Click to expand...
Click to collapse
the bumper is slightly raised on the front and in the back to help protect. not guaranteed. i hate cases as well, however, i think i will be giving a bumper a try.
Yeah, I don't like the chrome ring either. My old Vibrant had it and it looked terrible after a couple of months. The paint started to chip and made the phone look really old. Plus it's kind of an outdated design cue. The N4 would have looked much more sleek without it.
Even in Google's promo shots the ring looks black, not silver. Looks much nicer, IMO.
You could always paint the silver ring black like many nexus 7 users have done
Sent from my Desire HD using xda app-developers app
manlisten said:
Even in Google's promo shots the ring looks black, not silver. Looks much nicer, IMO.
Click to expand...
Click to collapse
found that pretty interesting, too. Don't they like their own phone? On Googles pics, chrome thing is almost invisible, while on hands on shots you can clearly see it:
https://play.google.com/store/devices/details?id=nexus_4_16gb
VS
http://www.theverge.com/2012/10/29/3569540/google-nexus-4-preview-price-release-date
sassyness77 said:
You could always paint the silver ring black like many nexus 7 users have done
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
but you would have a deformed phone :cyclops:
I'm not a fan of the tacky fake chrome, but I'll probably just get a case/bumper for it anyway.
Wait to see how it is constructed, I normally just let my phones get scratched on their cases and then when come to selling just buy the parts and replace them, it's always as cheap as buying cases.
Bump for awareness. Someone please reply if you know about the quality/material/durability of the bezel. The strange thing is that they designed the bezel like that, to make sure the screen is safe, when put down. One would think that they made it out of a durable material/finish.
Edit: I'm quite sure that it's impossible to replace parts, when damaged. Since the battery door is sealed, I reckon you're f****d when you drop your phone and the bezel gets scratched up. This could be an issue to me, for sure.
gideonMorrison said:
Edit: I'm quite sure that it's impossible to replace parts, when damaged. Since the battery door is sealed, I reckon you're f****d when you drop your phone and the bezel gets scratched up. This could be an issue to me, for sure.
Click to expand...
Click to collapse
It looks like the back cover is held on only with two screws. Standard screws not some proprietary kind. So in theory (without actually having a device to work with) it should be possible to easily replace the back cover assuming you found a new one. The back cover on this phone has all sorts of circuitry built into it so it might be quite difficult to find a new one.
It is also possible that the warranty sticker is on the bottom of that back cover, so when you take it off you rip off the warranty sticker. We will have to wait for a teardown to see if this is the case.

[Q] Future damage on HTC One

I can't decide between the HTC One and the GS4 for one reason only: body damage. All the reviews so far have been about the usual stuff, but no one mentions what possibly could happen in the future. Now, all my previous phones have been plastic, and the scratches and damages have been minimal. But I was just wondering, with the metal and all, how badly it would get affected? Would the body degrade after a year?
Some reports say that the S4 is worse than the One or Iphone 5 in terms of durability. But i want to hear from the users themselves what the reality is.
P.S: I won't use a case, because i'm not about to buy a good phone and ruin its looks with a case.
Appreciate your honest feedback!
Thanks
kingzain900 said:
I can't decide between the HTC One and the GS4 for one reason only: body damage. All the reviews so far have been about the usual stuff, but no one mentions what possibly could happen in the future. Now, all my previous phones have been plastic, and the scratches and damages have been minimal. But I was just wondering, with the metal and all, how badly it would get affected? Would the body degrade after a year?
Some reports say that the S4 is worse than the One or Iphone 5 in terms of durability. But i want to hear from the users themselves what the reality is.
P.S: I won't use a case, because i'm not about to buy a good phone and ruin its looks with a case.
Appreciate your honest feedback!
Thanks
Click to expand...
Click to collapse
I had an S3 prior to my One, and have vowed not to go plastic again, as after 12 months my S3 especially the back was covered in ugly scratches, even the plastic case I had on for a month scratched the S3.
The One is made from an aluminium alloy since Aluminium as a pure metal I am sure is way too soft, I think Al-Mg-Si is probably the elements but I dont know the mix.
http://en.wikipedia.org/wiki/Aluminium_alloy
Try this one
http://www.5stareasyofficesupplies....master-Yellow-Phone-Sim-Free&IdProduct=879095
Sent from my HTC One using Tapatalk 2
schrickm5 said:
I had an S3 prior to my One, and have vowed not to go plastic again, as after 12 months my S3 especially the back was covered in ugly scratches, even the plastic case I had on for a month scratched the S3.
The One is made from an aluminium alloy since Aluminium as a pure metal I am sure is way too soft, I think Al-Mg-Si is probably the elements but I dont know the mix.
http://en.wikipedia.org/wiki/Aluminium_alloy
Click to expand...
Click to collapse
Oh I didn't know that the S3 could get that bad. Most people have said that plastic handles it well. Thanks for your help though.
seanicca said:
Try this one
http://www.5stareasyofficesupplies....master-Yellow-Phone-Sim-Free&IdProduct=879095
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
What a wonderful on-topic post! Thank you soooo much for your kind help and tip. You have solved all my problems.
After having my One for a week , I have managed to bump into the corner of the table and that corner tap into the camera area and shattered the lens cover and damaged the camera modules, it wasn't hard but with sheer bad luck it dented the surrounded area (hardly visible due to no scratches) but it's there.
dethree said:
After having my One for a week , I have managed to bump into the corner of the table and that corner tap into the camera area and shattered the lens cover and damaged the camera modules, it wasn't hard but with sheer bad luck it dented the surrounded area (hardly visible due to no scratches) but it's there.
Click to expand...
Click to collapse
Oh jeez that sucks! I hope you had warranty.
kingzain900 said:
What a wonderful on-topic post! Thank you soooo much for your kind help and tip. You have solved all my problems.
Click to expand...
Click to collapse
Seriously, if people thought about what could happen in the future no one would buy anything. Like you I don't really like cases but after paying nearly £500 on this phone I decided to buy a nillkin case off eBay for under £5 and it hardly adds any bulk to the phone, I've still had people ask what phone I've got and been impressed
http://www.ebay.co.uk/itm/Black-Nillkin-Matte-Back-Hard-Cover-Case-LCD-Guard-HTC-One-M7-LTE-64GB-32GB-/130869235452?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D7468025070692046485%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D130869235452%26
seanicca said:
Seriously, if people thought about what could happen in the future no one would buy anything. Like you I don't really like cases but after paying nearly £500 on this phone I decided to buy a nillkin case off eBay for under £5 and it hardly adds any bulk to the phone, I've still had people ask what phone I've got and been impressed
http://www.ebay.co.uk/itm/Black-Nillkin-Matte-Back-Hard-Cover-Case-LCD-Guard-HTC-One-M7-LTE-64GB-32GB-/130869235452?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D7468025070692046485%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D130869235452%26
Click to expand...
Click to collapse
Ah that's a really nice case. Thanks. Minimal and clean. I was looking at a DoubleDip case as well but it seems a bit odd. This is definitely cheaper and better.

Categories

Resources