I'm using US firmware, this FTF is created by using Flashtool with files from PCC.
This is for the 32 GB Wifi version, Flash with flashtool.
The usual applies, I am not responsible if it blows up your device. Use at your own risk.
'simlock.ta' and 'preset1.ta' are excluded.
This is my first time making a FTF so please be kind
Mega Link:
https://mega.co.nz/#!bdYBlC6K!Ba7WLzrcPcIGLYZSRwMdnhJ1wzNTXBMHSijs1juoM3A
Cheer!
Haven't flashed it yet since I'm at work but I'm sure it will work.
Thanks!!
:victory:
Anyone got a root solution for this ftf and locked bootloader without needing using OTA?
Ricky D said:
Anyone got a root solution for this ftf and locked bootloader without needing using OTA?
Click to expand...
Click to collapse
Some body has said that if you manage to config SuperSU as a system app, then you can maintain the root access. Some thing like this:
- You are on 4.1.2 rooted.
- Config SuperSU as a system app.
- Flash the ftf without wiping data with Flashtool.
- You still have root access.
I did not try the method above yet
FiDra said:
Some body has said that if you manage to config SuperSU as a system app, then you can maintain the root access. Some thing like this:
- You are on 4.1.2 rooted.
- Config SuperSU as a system app.
- Flash the ftf without wiping data with Flashtool.
- You still have root access.
I did not try the method above yet
Click to expand...
Click to collapse
I don't believe this is correct. It must be ota to keep root. Unless you upgrade, downgrade the kernel root, and then flash only the updated kennel back
Is this Generic US or Global??
Is there a difference between the two?
I flashed it and it is apparently Global. Is there any difference between the 2?
May be Generic US since I was using the Generic US 4.1.2
FiDra said:
May be Generic US since I was using the Generic US 4.1.2
Click to expand...
Click to collapse
Hmm, I created the FTF for the 4.2.2. My customization is Global. Not sure if I should post it. They look the same after flashing.
FiDra said:
I'm using US firmware, this FTF is created by using Flashtool with files from PCC.
This is for the 32 GB Wifi version, Flash with flashtool.
The usual applies, I am not responsible if it blows up your device. Use at your own risk.
'simlock.ta' and 'preset1.ta' are excluded.
This is my first time making a FTF so please be kind
Mega Link:
https://mega.co.nz/#!bdYBlC6K!Ba7WLzrcPcIGLYZSRwMdnhJ1wzNTXBMHSijs1juoM3A
Cheer!
Click to expand...
Click to collapse
CAN I USE THIS FOR MY JAPAN VER. ? Same is 32GB WIFI ONLY and with root at 4.12 now, thanks
Yes, it's safe to do that. But please make sure yours is SGPXX, not SO-XX.
Sent from my SGP312 using XDA Premium HD app
Related
I find in this forum and another site but it is not have
it is been specified here
http://www.ptcrb.com/vendor/complete/view_complete_request_guest.cfm?modelid=22402
Rep#1
Yeah I find in it but I want ftf File to flash rom
salution said:
Rep#1
Yeah I find in it but I want ftf File to flash rom
Click to expand...
Click to collapse
You can't get it before DoCoMo releases it...
Didn't you try to create ftf yourself?
salution said:
I find in this forum and another site but it is not have
Click to expand...
Click to collapse
Can you let me know if you find it?
Install 10.3.1.B.0.256 on Rotted SO-02E?
Has anyone figured out a way to install 10.3.1.B.0.256 on a rooted SO-02E yet?
I Rooted my Phone using EasyRootingToolkit_XPEIRAZ_SO-02E_v101, and would like to upgrade to 4.2.2 but the OTA install fails at about 15%
Thanks
Whiplash47 said:
Has anyone figured out a way to install 10.3.1.B.0.256 on a rooted SO-02E yet?
I Rooted my Phone using EasyRootingToolkit_XPEIRAZ_SO-02E_v101, and would like to upgrade to 4.2.2 but the OTA install fails at about 15%
Thanks
Click to expand...
Click to collapse
Having a similar issue here.
Any ideas?
Has anyone tried using DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip from this thread? Since it's possible to root 10.1.D.0.343 I would try upgrading to 10.3.1.B.0.256 first, then install 10.1.D.0.343 kernel using Flashtool, then root using DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip then install the new 10.3.1.B.0.256 kernel. I would create a 10.3.1.B.0.256.ftf and test it but I'm on a business trip in Australia at the moment and don't have the time.
Does any knowledgeable person have any update on this situation?
Any tips of what we Docomo users should do? I don't want to lose my root. And other users point out updating outright doesn't work anyway.
I'll pay a beer to whomever helps us Docomo sheep out
Firipu said:
Does any knowledgeable person have any update on this situation?
Click to expand...
Click to collapse
Have you looked at the DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip thread? The same procedure should apply since you can root 10.1.D.0.343's kernel.
1. Upgrade to 10.3.1.B.0.256 (you'll lose root at this point)
2. install 10.1.D.0.343's kernel
3. root using DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip
4. install 10.3.1.B.0.256 kernel
5. profit!!!
lancebuks said:
Have you looked at the DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip thread? The same procedure should apply since you can root 10.1.D.0.343's kernel.
1. Upgrade to 10.3.1.B.0.256 (you'll lose root at this point)
2. install 10.1.D.0.343's kernel
3. root using DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip
4. install 10.3.1.B.0.256 kernel
5. profit!!!
Click to expand...
Click to collapse
Thx, but my phone's bootloader is locked (as are all Docomo phones). I thought it was impossible to install a different kernel then. Not t mention that some people noted that the OTA upgade doesn't work if your pone is rooted. Haven't tried it myself though.
Losing root does not mean I lose CWM, right?
Edit: So I tried updating it, the update just stops after 2-3 minutes, the phone reboots and I get a message 'update failed, please try again'.
Firipu said:
Thx, but my phone's bootloader is locked (as are all Docomo phones). I thought it was impossible to install a different kernel then. Not t mention that some people noted that the OTA upgade doesn't work if your pone is rooted. Haven't tried it myself though.
Losing root does not mean I lose CWM, right?
Edit: So I tried updating it, the update just stops after 2-3 minutes, the phone reboots and I get a message 'update failed, please try again'.
Click to expand...
Click to collapse
it'll still work with the SO-02E locked bootloader. I too am on SO-02E locked bootloader docomo and have tested this method using 10.3.1.A.2.67. After installing 10.3.1.B.0.256 you'll have to reinstall 10.1.D.0.343's kernel using Flashtool then just use rootkit to root it and finally reinstall 10.3.1.B.0.256's kernel using Flashtool.
I usually create my own .ftf files and use Flashtool to upgrade. I can't test it since I'm in Australia at the moment but it should work as long as you have 10.1.D.0.343's kernel installed....just don't forget to reinstall 10.3.1.B.0.256 afterwards. You'll lose CMW/TWRP so you'll have to reinstall it afterwards.
I've been trying to do the OTA update. But it keeps failing. I was pretty confident with my old Galaxy Note, flashing new roms and kernels almost every day, but I can't seem to get the hang of fooling around with my Xperia Z. I'm really afraid of losing my NFC-Felica functions, I need them daily for my commute.
I think the update fails because of my root. I could reflash an original ROM, but then I will loose root and recovery if I understand it correctly. The update will probably work, but can I reflash 434 then to root it? (434 was Android 4.1.2 and the new firmware is 4.2.2).
I'm kinda confused (and very stupid apparently .
SO-02E 10.3.1.B.0.256 can be rooted
Follow this link if you want to root your SO-02E 10.3.1.B.0.256.
The site's in Japanese but just scroll a bit and click on rootkitZ_20131112.zip and install it.
Profit!!!
Step 1
lancebuks said:
Have you looked at the DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip thread? The same procedure should apply since you can root 10.1.D.0.343's kernel.
1. Upgrade to 10.3.1.B.0.256 (you'll lose root at this point)
2. install 10.1.D.0.343's kernel
3. root using DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip
4. install 10.3.1.B.0.256 kernel
5. profit!!!
Click to expand...
Click to collapse
The issue I am running into is that I cannot make the OTA Update (Step 1)work with or without losing the root.
If I could get to that point I'm pretty sure I could follow the procedure to to reroot the device, I just need to get the initial upgrade taken care of.
Any Thoughts?
Thanks
thanks
Whiplash47 said:
The issue I am running into is that I cannot make the OTA Update (Step 1)work with or without losing the root.
If I could get to that point I'm pretty sure I could follow the procedure to to reroot the device, I just need to get the initial upgrade taken care of.
Any Thoughts?
Thanks
Click to expand...
Click to collapse
I had exactly the same problem, impossible to remove the root correctly to make the OTA work. In the end I just used flashtool to put stock 434 back on the phone. The OTA worked perfectly after that. Especially now that you can root 256 it's a non issue. Make a backup with Titanium backup of your apps on your SD card before restoring it. You can use it to put all your apps back after you root 256. A bit annoying, but all in all it's the easiest way I've found.
Thanks
That worked. Thanks to everyone for all your help.
after rooting .256.. is it possible to install a custom rrecovery and a custom rom?
lancebuks said:
Follow this link if you want to root your SO-02E 10.3.1.B.0.256.
The site's in Japanese but just scroll a bit and click on rootkitZ_20131112.zip and install it.
Profit!!!
Click to expand...
Click to collapse
works on me.. thank you
I seem to be in the only country that can't get the 10.3.1.A.2.67 firmware yet. It's not showing up on my phone or using PC Companion. It tells me I have the latest version already (I have 10.1.1.A.1.310 on a ZR model C5502).
Is it possible to get a manual download from anywhere?
My phone is very new and I will want to root it, but I thought it would be sensible to get the .67 FW first, then root (hopefully using vRoot).
I have seen this download: C5503_10.3.1.A.2.67_RU.ftf whcih is posted here: http://www.xperiaguide.com/2013/09/...2-2-10-3-1-a-2-67-firmware-update-rolled-out/ but it says on that page...
NOTE :- As soon C5502 ftf file will be available, we will update the links. If you are desperate to use above file you can use it, it will do no harm. Cross flash it. Root your device. Then edit your build.prop back to C5502.
Click to expand...
Click to collapse
and I don't know what "cross flash it" means or how to "edit my build.prop back to C5502".
I'm also guessing that the "RU" means that the FW above is Russian. Not sure if that matters?
Any help very gratefully received. Thank you.
moocou said:
I seem to be in the only country that can't get the 10.3.1.A.2.67 firmware yet. It's not showing up on my phone or using PC Companion. It tells me I have the latest version already (I have 10.1.1.A.1.310 on a ZR model C5502).
Is it possible to get a manual download from anywhere?
My phone is very new and I will want to root it, but I thought it would be sensible to get the .67 FW first, then root (hopefully using vRoot).
I have seen this download: C5503_10.3.1.A.2.67_RU.ftf whcih is posted here: http://www.xperiaguide.com/2013/09/...2-2-10-3-1-a-2-67-firmware-update-rolled-out/ but it says on that page...
and I don't know what "cross flash it" means or how to "edit my build.prop back to C5502".
I'm also guessing that the "RU" means that the FW above is Russian. Not sure if that matters?
Any help very gratefully received. Thank you.
Click to expand...
Click to collapse
which country are you from. I flashed indian 5502 one so no editing
Thanks to akash4357
akash4357 said:
Here you go. C5502 Download
Click to expand...
Click to collapse
:good:
FTF for build 109. Tested and working on my tablet...
Untouched FTF:
Part 1: http://d-h.st/upk
Part 2: http://d-h.st/I7I
Flashable and Stripped FTF for Root:
Part 1: http://d-h.st/W5j
Part 2: http://d-h.st/0eI
:good:
Which customization is this? I suppose VMo US_CA_PR (1273-3867)?
Apollo89 said:
Which customization is this? I suppose VMo US_CA_PR (1273-3867)?
Click to expand...
Click to collapse
Customization version:
1273-3867_R1C
Active Customization:
1273-3751_R1C
Thanks. Works great.
Exactly what I was looking for. Just flash over existing 4.3 and keep existing apps and data.
Crash338 said:
FTF for build 109. Tested and working on my tablet...
Part 1: http://d-h.st/upk
Part 2: http://d-h.st/I7I
:good:
Click to expand...
Click to collapse
What about root? loose it?
Marv42 said:
What about root? loose it?
Click to expand...
Click to collapse
This is the untouched Sony FTF so if you flash with this, it will give you latest build by wiping your phone so root is lost. I created the zip file and stripped FTF for this firmware but didn't upload it. Let me know if you want it, Ill try uploading again... last time dev host was being a bit** about it.
Crash338 said:
This is the untouched Sony FTF so if you flash with this, it will give you latest build by wiping your phone so root is lost. I created the zip file and stripped FTF for this firmware but didn't upload it. Let me know if you want it, Ill try uploading again... last time dev host was being a bit** about it.
Click to expand...
Click to collapse
Yes, I want. It will be very nice, if you can upload it.
Simpy flashing with the Falshingtool and uncheck the wipes?
Thank you very much
Marv42 said:
Yes, I want. It will be very nice, if you can upload it.
Simpy flashing with the Falshingtool and uncheck the wipes?
Thank you ver much
Click to expand...
Click to collapse
No, on 4.3 it doesn't work like that.
1 - You need to flash back to 4.1.2 or 4.2.2 firmware with flashtool, 1 that will let you root your tablet with a 1 click root method from DoomLord.
2 - Install Recovery once rooted
3 - Upload the zip file to your SDCard and flash the zip from CWM or TWRP
4 - Power Off WITHOUT rebooting
5 - Flash with Flashtool the the stripped FTF
Boot and you will be rooted on the latest firmware.
Its the same way as in this thread ( http://forum.xda-developers.com/showthread.php?t=2588442 )except you will be using the latest files/firmware.
I'll upload the files later for whoever wants them ... getting off work in a few hours.
adielee said:
Thanks. Works great.
Exactly what I was looking for. Just flash over existing 4.3 and keep existing apps and data.
Click to expand...
Click to collapse
Did you previously have root and simply updated or just update without root without wiping?
Crash338 said:
No, on 4.3 it doesn't work like that.
1 - You need to flash back to 4.1.2 or 4.2.2 firmware with flashtool, 1 that will let you root your tablet with a 1 click root method from DoomLord.
2 - Install Recovery once rooted
3 - Upload the zip file to your SDCard and flash the zip from CWM or TWRP
4 - Power Off WITHOUT rebooting
5 - Flash with Flashtool the the stripped FTF
Boot and you will be rooted on the latest firmware.
Its the same way as in this thread ( http://forum.xda-developers.com/showthread.php?t=2588442 )except you will be using the latest files/firmware.
I'll upload the files later for whoever wants them ... getting off work in a few hours.
Click to expand...
Click to collapse
my device was rooted, I start the update from step 3. without any wipe. Update works and its still rooted.
Thankx
Crash338 said:
Did you previously have root and simply updated or just update without root without wiping?
Click to expand...
Click to collapse
Previously had root and kept root after update.
Just follow these steps:
1) copy zip to SDcard
2) go into recovery and install zip (without wiping anything)
3) turn off phone
4) flash kernel via flashtool
done.
adielee said:
Previously had root and kept root after update.
Just follow these steps:
1) copy zip to SDcard
2) go into recovery and install zip (without wiping anything)
3) turn off phone
4) flash kernel via flashtool
done.
Click to expand...
Click to collapse
Good to know, thanks!
Waiting for the 4.4 version (Rooted) :good:
Two quick questions... One why is there a part one and two??? Doesn't flash tool only let you select one zip.
Second if I'm fully stock I can still flash with flash tool no root needed.???
May sound stupid but I was told ftf files can be flashed without root via flashtool
Sent from my SGP312 using Tapatalk
David111jr said:
Two quick questions... One why is there a part one and two??? Doesn't flash tool only let you select one zip.
Second if I'm fully stock I can still flash with flash tool no root needed.???
May sound stupid but I was told ftf files can be flashed without root via flashtool
Sent from my SGP312 using Tapatalk
Click to expand...
Click to collapse
The package (FTF stripped and Zip for Root) is splited in two parts. Just download both parts, and decompress them with 7Zip, WinRar etc
Jonfensu said:
Waiting for the 4.4 version (Rooted) :good:
Click to expand...
Click to collapse
I created the ZIP and Stripped FTF 4.4 yesterday for my Xperia ZL phone. Has it also been released for the tablet?
I don't have PCC installed on the laptop I'm currently on...
Crash338 said:
I created the ZIP and Stripped FTF 4.4 yesterday for my Xperia ZL phone. Has it also been released for the tablet?
I don't have PCC installed on the laptop I'm currently on...
Click to expand...
Click to collapse
root and pcc update is possible only for lte version . for stock 4.4 update and flashable zip for wifi version you have to wait
ryany67 said:
root and pcc update is possible only for lte version . for stock 4.4 update and flashable zip for wifi version you have to wait
Click to expand...
Click to collapse
Gotcha, thanks
Thanks and question
Crash338 said:
FTF for build 109. Tested and working on my tablet...
Untouched FTF:
Part 1: http://d-h.st/upk
Part 2: http://d-h.st/I7I
Flashable and Stripped FTF for Root:
Part 1: http://d-h.st/W5j
Part 2: http://d-h.st/0eI
:good:
Click to expand...
Click to collapse
First of all thanks for the FTF.
My question is if it would work with an SGP312 from México?
My intention it´s to downgrade from 4.4.4 to 4.3
lalo_a13 said:
My question is if it would work with an SGP312 from México?
Click to expand...
Click to collapse
99% that it will work.
Hi everyone,
I know my title just explained everything
but i will explain in details now here
i bought an Xperia Z1 after burning my Xperia Z because of over heating it.:angel:
anyway
all what i wanted to do is rooting my Xperia Z WITHOUT installing another firmware UNLESS there's a way to not lose my data.
i guess what i have not is a half root, i have SuperSU installed
CWM installed BUT i can't access it. i only access it by flashing it again from the PC, its like one time use only :silly:
anyway i installed supersu and rooted the device
root checker says congratulations you have root access
busybox says install was not successful try another path AND i tried another path which leaded me to the same result
the problem is
I DON'T HAVE THE WRITE PERMISSION IN THE SYSTEM!!!
HELP?!
KitKat 4.4.2 Xperia Z1 LTE - 14.3.A.0.757
Reflash your pre rooted rom. I experienced the same problem. I couldnt get access to root. Flash on recovery.
Sent from my C6903 using Tapatalk
mahalkosijoy said:
Reflash your pre rooted rom. I experienced the same problem. I couldnt get access to root. Flash on recovery.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
am sorry but i didn't get you..
actually
i don't want to flash any rom on my device
i have a stock rom
with half a root
all what i need is
getting the write permission in the system
or if theres away to flash another rom without losing my data and my apps
am ready to do it!
Easiest way is to follow the link in my signature.
zerok911 said:
am sorry but i didn't get you..
actually
i don't want to flash any rom on my device
i have a stock rom
with half a root
all what i need is
getting the write permission in the system
or if theres away to flash another rom without losing my data and my apps
am ready to do it!
Click to expand...
Click to collapse
hmm. tell me how you rooted your phone, the method.
Sent from my C6903 using Tapatalk
mahalkosijoy said:
hmm. tell me how you rooted your phone, the method.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
i used this method provided in this link:
thebluewater. blogspot .ae /2014/05/ how-to-root-your-sony-xperia-z1-with .html
i had to make spaces in between
am not allowed to post links am still a new member..
gregbradley said:
Easiest way is to follow the link in my signature.
Click to expand...
Click to collapse
i really like your method, sir.
but am i going to lose my data and apps?
Not if you back them up first.
zerok911 said:
i used this method provided in this link:
thebluewater. blogspot .ae /2014/05/ how-to-root-your-sony-xperia-z1-with .html
i had to make spaces in between
am not allowed to post links am still a new member..
Click to expand...
Click to collapse
That link explain the same method from XDA but the other one, Unlock Bootloader and flash the Kernel, so did you Unlocked Your Bootloader?
zerok911 said:
I DON'T HAVE THE WRITE PERMISSION IN THE SYSTEM!!!
Click to expand...
Click to collapse
Hello.
I was experiencing the same problem after rooting 14.3.A.0.757 on my Xperia Z1. I searched the forums and found that the problem is due to Sony's RIC service. Correct me if I am wrong. Updating to the latest XZDualRecovery will solve the problem.
This is what I did: (I am assuming you have a working rooted 14.3.A.0.757)
Download the latest flashable zip from NUT's XZDualRecovery thread in Cross-Device Development and flash it via recovery. You have now upgraded your recovery to the latest version. Now you can mount system partition with r/w.
gregbradley said:
Not if you back them up first.
Click to expand...
Click to collapse
Okay thanks a lot sir
Its working 100%
But the camera is dead :crying:
I have managed to downgrade my Xperia z1 c6906 to 4.4.4 fw. 187 and rooted it.
I wondering now what steps I can take to have it updated to the latest fw and keep root. I used flash tool to flash the 4.4.4 onto my phone and then used towelroot to root it.
I'm also unsure which recovery I can install on the device that will work.
I've searched around for some solutions to no avail and a lot of links for downloads were broken.
Thanks for your help
vincent-h said:
I have managed to downgrade my Xperia z1 c6906 to 4.4.4 fw. 187 and rooted it.
I wondering now what steps I can take to have it updated to the latest fw and keep root. I used flash tool to flash the 4.4.4 onto my phone and then used towelroot to root it.
I'm also unsure which recovery I can install on the device that will work.
I've searched around for some solutions to no avail and a lot of links for downloads were broken.
Thanks for your help
Click to expand...
Click to collapse
Downgrading to KK isn't necessary. Use the EasyRoot tool instead.
Alternatively, you can grab a pre-rooted FTF through XperiFirm/XDA or build one yourself.
kentexcitebot said:
Downgrading to KK isn't necessary. Use the EasyRoot tool instead.
Alternatively, you can grab a pre-rooted FTF through XperiFirm/XDA or build one yourself.
Click to expand...
Click to collapse
Are you saying easyroot works on the latest 5.1.1 Sony firmware? Damn I'm an idiot.
I'll try to flashtool to the latest ftf from xperifirm and then easyroot it and go from there.
thanks!
vincent-h said:
Are you saying easyroot works on the latest 5.1.1 Sony firmware? Damn I'm an idiot.
I'll try to flashtool to the latest ftf from xperifirm and then easyroot it and go from there.
thanks!
Click to expand...
Click to collapse
I don't think easy root works on 5.1.1. I tried it myself.
So what you wanna do is to downgrade to 4.4.4 and use EasyRoot from there, where it really works.
Then you make a pre-rooted FTF file + the latest version you want. You'll need a recovery for your rooted phone.
Flash it, and ta-da, you just brought your roots into the latest version!
helpplease123 said:
I don't think easy root works on 5.1.1. I tried it myself.
So what you wanna do is to downgrade to 4.4.4 and use EasyRoot from there, where it really works.
Then you make a pre-rooted FTF file + the latest version you want. You'll need a recovery for your rooted phone.
Flash it, and ta-da, you just brought your roots into the latest version!
Click to expand...
Click to collapse
you are correct the method linked above didn't work to root.
I did however managed to root 5.1.1 by using kingroot, replacing kingroot with superSU using the terminal editor and then flashing the dual recovery.
I'm now happily rooted and running a custom rom.
vincent-h said:
you are correct the method linked above didn't work to root.
I did however managed to root 5.1.1 by using kingroot, replacing kingroot with superSU using the terminal editor and then flashing the dual recovery.
I'm now happily rooted and running a custom rom.
Click to expand...
Click to collapse
Yeah. I took the hassle myself to go back because the one click root apps seem to be shady and I do not trust them.
helpplease123 said:
Yeah. I took the hassle myself to go back because the one click root apps seem to be shady and I do not trust them.
Click to expand...
Click to collapse
Fair enough, this was my old sony phone and I just wanted to breathe new life and usability into it with some custom roms.
If you did go back to 4.4.4 I think you can just pre-root a ftf file and flash it if you want the latest fw
vincent-h said:
Fair enough, this was my old sony phone and I just wanted to breathe new life and usability into it with some custom roms.
If you did go back to 4.4.4 I think you can just pre-root a ftf file and flash it if you want the latest fw
Click to expand...
Click to collapse
yep, that's what I said in my last post. Btw, does your Xperia with Facebook work?
helpplease123 said:
yep, that's what I said in my last post. Btw, does your Xperia with Facebook work?
Click to expand...
Click to collapse
I have not tried that.
Like I said it was an old phone that I was just breathing new life into. Will likely become a home media controller device/ back up phone.
vincent-h said:
I have not tried that.
Like I said it was an old phone that I was just breathing new life into. Will likely become a home media controller device/ back up phone.
Click to expand...
Click to collapse
Can you try it for me? It is located in Settings>Accounts>Add Account>Xperia with Facebook. I think this used to work properly before Lollipop, but I wonder if it only happens to me.