I love active notifications however I feel that Sensor is way to sensitive. If im sitting at a desk and its moves just a little bit it turns on. I'm hoping in the future will have a way to lower this sensitivity, anyone else experiencing this?
seanrobot said:
I love active notifications however I feel that Sensor is way to sensitive. If im sitting at a desk and its moves just a little bit it turns on. I'm hoping in the future will have a way to lower this sensitivity, anyone else experiencing this?
Click to expand...
Click to collapse
It's not always the touch, could have been a light change or noise too. That being said don't worry about it deciding to wake up the active notification is very low battery draw.
tw1tch175 said:
It's not always the touch, could have been a light change or noise too. That being said don't worry about it deciding to wake up the active notification is very low battery draw.
Click to expand...
Click to collapse
It's distracting, though. I don't get how this is the solution for receiving too many notifications during the day. For me, it's actually more stressful to see the clock/notifications coming in and out every 30 secs.
I'm not meaning to criticize, just wondering... is having a screen going on and off really nicer for everyone but me?
Ivan Fuentes Hagar said:
It's distracting, though. I don't get how this is the solution for receiving too many notifications during the day. For me, it's actually more stressful to see the clock/notifications coming in and out every 30 secs.
I'm not meaning to criticize, just wondering... is having a screen going on and off really nicer for everyone but me?
Click to expand...
Click to collapse
Well I agree in your situation it might be easier to have it less often I think the majority of cases are people pulling it out of a pocket or they keep it face down on a desk so it's less of an issue. Once we have some real development this is very possibly something that will be tweaked keeping the phone face down may help you for now.
Related
Is there a way to turn off the flicky wrist screen on thing on my G watch R? I use the "always-on screen" feature and dont need the display to light up fully every time i look at the watch....!
Best regards/ Henke
If you mute it, it turns that off. But then it is muted so I do not know if that is any good to you.
seepage said:
If you mute it, it turns that off. But then it is muted so I do not know if that is any good to you.
Click to expand...
Click to collapse
Well i would still like to get the notification vibration, but its a start...!!
Thanks!
Best regards/ Henke
944s2power said:
Well i would still like to get the notification vibration, but its a start...!!
Thanks!
Best regards/ Henke
Click to expand...
Click to collapse
Most people seem to be using always on. Why? if you list your hand to look it comes on. It will make the battery last for a shorter time and what about screen burn? I may just be overthinking this.
seepage said:
Most people seem to be using always on. Why? if you list your hand to look it comes on. It will make the battery last for a shorter time and what about screen burn? I may just be overthinking this.
Click to expand...
Click to collapse
ive done some playing around with screen always on / off and it really doesnt seem to make that much difference to battery 6:30am - 10:30pm and i have 50% battery left with screen always on. u might be able to get a few more % having it off but i didnt notice much difference in testing.
not sure about screen burn tho...
seepage said:
Most people seem to be using always on. Why? if you list your hand to look it comes on. It will make the battery last for a shorter time and what about screen burn? I may just be overthinking this.
Click to expand...
Click to collapse
I am worried about the screen burn-in issue. The phone based on the same P-OLED display technology G Flex suffers from this problem. I can see that the quality of GWaR's panel is improved but the burn in problem should exist as long as it's oled.
Another small thing I noticed is when you use stock watch faces, their always on screen content will randomly shift a little every minute, to avoid screen burn(so LG is aware of this problem). Thus worrying about the screen burn is not over-thinking. I turned off the always-on function when I use 3rd party watch faces. (EDIT: 3rd-party watch faces can shift itself too, seems like it's a system-wide screen saving mechanism)
TeroZ said:
(EDIT: 3rd-party watch faces can shift itself too, seems like it's a system-wide screen saving mechanism)
Click to expand...
Click to collapse
yes, it is - the Samsung Gear Live has the same feature - lets hope it helps in the long run...
Yeees
This is doing my head in, whats the point in an always on ambient mode, if the bloody thing turns on every time i move my arm. Pointless.
And mute it to stop it, then makes wearing it pointless?
This needs to be addressed asap!
944s2power said:
Is there a way to turn off the flicky wrist screen on thing on my G watch R? I use the "always-on screen" feature and dont need the display to light up fully every time i look at the watch....!
Click to expand...
Click to collapse
jrvenge said:
This is doing my head in, whats the point in an always on ambient mode, if the bloody thing turns on every time i move my arm. Pointless.
And mute it to stop it, then makes wearing it pointless?
This needs to be addressed asap!
Click to expand...
Click to collapse
+1
dew.man said:
+1
Click to expand...
Click to collapse
Well, the darn thing dosn't always turn on when i look at my watch, and i like the way it looks when always on, and don't want an all black display when others look at my Beutiful watch...!!! ??
944s2power said:
Well, the darn thing dosn't always turn on when i look at my watch, and i like the way it looks when always on, and don't want an all black display when others look at my Beutiful watch...!!! ??
Click to expand...
Click to collapse
LOL I think you misunderstood my post. I am in 100% agreement with both of you in that we need to be able to disable the "auto on" behavior without muting notifications.
Merely expressing my agreement...
dew.man said:
LOL I think you misunderstood my post. I am in 100% agreement with both of you in that we need to be able to disable the "auto on" behavior without muting notifications.
Merely expressing my agreement...
Click to expand...
Click to collapse
+1 ??? Sorry for that.. Always read too quickly for my own good..!! ?
Just got my watch yesterday and this is also making me crazy... That's why I came to the forum in the first place. We need a setting to turn off the wake up movement gesture
Same thing here, it should be a fundamental control to turn this feature off. I'm a little worried about battery life on mine too, for some reason I'm just barely squeaking 24 hours on a full charge with no more than 12 notifications per day???
Patience my friends. Apparently there is a new update on the way, some lollipop for wear which has this much needed feature implemented.
More details here: http://phandroid.com/2014/11/11/android-wear-5-0-lollipop-features-revealed-smartwatch/
ro_explorer said:
Patience my friends. Apparently there is a new update on the way, some lollipop for wear which has this much needed feature implemented.
More details here: http://phandroid.com/2014/11/11/android-wear-5-0-lollipop-features-revealed-smartwatch/
Click to expand...
Click to collapse
Are you referring to "Theater Mode"? That turns the screen off. We want the screen to be on but in the dim state.
I'm referring to this:
I found that ambient display is useless.
I was thinking that whenever I got notification, the ambient display will lit the screen and then OFF ... then lit ... then OFF.
You know, kind of asking attention.
It is NOT.
It lit ONCE, then OFF forever, until I pick up the phone (of course).
The problem with this, if I leave the phone on my desk for quite long, I won't know if there was notification arrived, unless I pick up the phone.
So, what's the use of this ambient display?
Damn, LED notification would be much useful!
gogol said:
I found that ambient display is useless.
I was thinking that whenever I got notification, the ambient display will lit the screen and then OFF ... then lit ... then OFF.
You know, kind of asking attention.
It is NOT.
It lit ONCE, then OFF forever, until I pick up the phone (of course).
The problem with this, if I leave the phone on my desk for quite long, I won't know if there was notification arrived, unless I pick up the phone.
So, what's the use of this ambient display?
Damn, LED notification would be much useful!
Click to expand...
Click to collapse
So you can either see the notification come in first time when it lights up. Or you can quickly pick the phone up to see if there are any notifications without it fully waking up.
LED is easier though!
I prefer they don't lit it on and off constantly because it is distracting when you are in a meeting and it drains your battery. Though having an option would be nice
Yeah, I agree it is a useless battery wasting feature (though the impact to battery is minimal). Thankfully the LED can be enabled with Light Flow even though that is flawed as well since the app will randomly get killed and the light won't work.
Ambient Display would be perfect if it flashed continuously until you check it and if it worked in priority mode, which it doesn't if you have priority mode set up like the old silent mode. If you don't want your phone making noise or vibrating but still need to see notifications it is pretty worthless.
you are dead on sir.
gogol said:
I found that ambient display is useless.
I was thinking that whenever I got notification, the ambient display will lit the screen and then OFF ... then lit ... then OFF.
You know, kind of asking attention.
It is NOT.
It lit ONCE, then OFF forever, until I pick up the phone (of course).
The problem with this, if I leave the phone on my desk for quite long, I won't know if there was notification arrived, unless I pick up the phone.
So, what's the use of this ambient display?
Damn, LED notification would be much useful!
Click to expand...
Click to collapse
I was told Google is moving away from using led notification, but yet they designed a phone? with one built in but totally useless at this point. Hopefully the next update will address this.
Mine flashes continually until I check things... Every ten seconds or so. It is wonderful... Not sure what is up with your guys' one time notifications...
ambient display is alrite.... It doesn't work that well though. It does not consistently work when you pick up the phone. I would much rather have them activate the LED since it's already there.
you. me. and many more
tsy87 said:
ambient display is alrite.... It doesn't work that well though. It does not consistently work when you pick up the phone. I would much rather have them activate the LED since it's already there.
Click to expand...
Click to collapse
I'm setting this gripe in many circles outside of xda hopefully they will address it in the next update. Lots of corporate people want that portion which was always a part of android and even non android phones of the past.
EmperorX said:
Mine flashes continually until I check things... Every ten seconds or so. It is wonderful... Not sure what is up with your guys' one time notifications...
Click to expand...
Click to collapse
So does mine
vvveith said:
I was told Google is moving away from using led notification, but yet they designed a phone? with one built in but totally useless at this point. Hopefully the next update will address this.
Click to expand...
Click to collapse
in all fairness, Moto made the phone, whether for Android Silver or whatever other reason, it wasnt designed ground up with Google or originally planned as a Nexus.
I like ambient. Works great for me. and being an Amoled display, only the pixels being used light up, so battery is minimal
users report otherwise.
CraigP17 said:
in all fairness, Moto made the phone, whether for Android Silver or whatever other reason, it wasnt designed ground up with Google or originally planned as a Nexus.
I like ambient. Works great for me. and being an Amoled display, only the pixels being used light up, so battery is minimal
Click to expand...
Click to collapse
Acording to the battery threads I've read, ambient display sucks battery.
mzimand said:
So does mine
Click to expand...
Click to collapse
What are you guys using? Lightflow?
vvveith said:
Acording to the battery threads I've read, ambient display sucks battery.
Click to expand...
Click to collapse
Does the device wake up from deep sleep for it? If yes it sure does suck a lot of battery. Especially if it is supposed to flash up in intervals to remind you of the notification.
jawmail said:
What are you guys using? Lightflow?
Click to expand...
Click to collapse
I just tested it... it flashes up every 30 seconds or so. As soon as as you click on it the screen is on without any delay. So I guess it screws your battery hard by making it wake up each time? It would mean that as soon as you have a notification your device would wake up every 30 seconds.
I can't get Lightflow to work at all. Do you need a kernel that has LED support?
jawmail said:
What are you guys using? Lightflow?
Click to expand...
Click to collapse
I am just using the regular ambient feature built into the stock rom. I am encrypted, rooted with stock kernel on stock 5.0.1. I have not messed with any AOSP roms .
jawmail said:
I can't get Lightflow to work at all. Do you need a kernel that has LED support?
Click to expand...
Click to collapse
Rooted and use root access for the LED activated in Lightflow.
Lightflow screws up ambient tough. It constantly flashes as if it has an notification, even if it only shows the clock. This WILL kill your battery in my opinion...
Led notification will drain batttery fast?
Via my NeXus™ 7FHD on XDA Premium app
I actually like it more than Active Display. Active was much more sensitive to movements which for really annoying.
Sent from my Nexus 6 using Tapatalk
Alienfreak said:
Rooted and use root access for the LED activated in Lightflow.
Lightflow screws up ambient tough. It constantly flashes as if it has an notification, even if it only shows the clock. This WILL kill your battery in my opinion...
Click to expand...
Click to collapse
I don't know what settings you set to make it do that.
Light Flow doesn't do that here. Cooperates fine with Ambient.
I know there are people (Lightflow Dev) who are working on getting the built-in led working, and I think that's great. I wonder if there are any devs working on making Ambient Display more useful...? I'm going to shut off the Ambient Display today and mess around with an app I used to use on the Galaxy S called NoLed. It puts dots or icons on the screen and could notify me of anything... might be the ticket here.
For the life of me I cannot use my N6 no-handed, even for just a moment. The 5-10 seconds I need to hold my phone up between my shoulder and my face to free both hands.......it never fails that I cause an issue with a live phone call. Obviously the larger screen (larger touch-sensitive area) and the screen being on for some reason during the call.......I always either put the phone call on hold, or even put the current call on hold and manage to dial one of my starred contacts. It is driving me up the damn wall. I am not a huge fan of the L phone interface (the starred favorites especially), I much prefer the KK layout.
Anyone else having as hard of a time as me? I'm wondering if the screen being off during the call would cure this. I guess I could manually cut it off when going to no-hands.......but figured it should do it on its own. Anyone care to either give me some suggestions, or even punch me for my ignorance and tell me what I am doing wrong?
Love everything about the phone, and also loving LiquidSmooth.......just hoping the development gets into high gear soon.
The screen is suppose to be off during calls, that's what the proximity sensor is for. Are you sure you are not hitting the power button while in call, i find it to be sensitive??If its not turning itself off when you put it up to your face, flash back to full stock. Still not working, then its probably a hardware issue???
Sent from my Nexus 6 using XDA Free mobile app
holeindalip said:
The screen is suppose to be off during calls, that's what the proximity sensor is for. Are you sure you are not hitting the power button while in call, i find it to be sensitive??If its not turning itself off when you put it up to your face, flash back to full stock. Still not working, then its probably a hardware issue???
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I forgot to reply I had this issue while stock as well. I wasn't looking to 'fix' this issue with a different ROM either, I just like the capabilities and development done in the ROM's themselves. Can't say I didn't hope something would change though.....
I only experience this with my left hand, LOL. Right handed, no issues with the screen turning off.
wilson289 said:
I only experience this with my left hand, LOL. Right handed, no issues with the screen turning off.
Click to expand...
Click to collapse
Well that is certainly odd lol.....
Anyone else? Surely I'm not the only one....... :silly:
Does anyone else have this issue? Every time you lock/unlock the brightness auto adjusts again (and it adjusts pretty low)
So even if I manually set it to 100% and lock/unlock it will be down to 25% again. Doesn't seem like it's learning at all
carloandreaguilar said:
Does anyone else have this issue? Every time you lock/unlock the brightness auto adjusts again (and it adjusts pretty low)
So even if I manually set it to 100% and lock/unlock it will be down to 25% again. Doesn't seem like it's learning at all
Click to expand...
Click to collapse
Seems like it takes a lot of time to learn. I don't use it anyway I prefer having control on it
carloandreaguilar said:
Does anyone else have this issue? Every time you lock/unlock the brightness auto adjusts again (and it adjusts pretty low)
So even if I manually set it to 100% and lock/unlock it will be down to 25% again. Doesn't seem like it's learning at all
Click to expand...
Click to collapse
Seems like a bug honestly, because it goes TOO LOW. I tried to lock the device several times to see if the "learning" of the slider improves, but it still goes back to the same spot... I'm gonna keep it deactivated until they fix it.
Android Pie has AI in basically everything and it learns for you, just keep adjusting the brightness manually and in a few days it'll know how you like your brightness and adjust it for you.
I care about to go low! And now I can't go below 19% with Adaptive ON, it's to high for a dark room.
jaycedam said:
Seems like a bug honestly, because it goes TOO LOW. I tried to lock the device several times to see if the "learning" of the slider improves, but it still goes back to the same spot... I'm gonna keep it deactivated until they fix it.
Click to expand...
Click to collapse
Actually I've been reading similar things about this on the pixel so it might just be the way it is. Might take long for it to learn. I read someone say it's always fun when he first unlocks it
And I found this link of people claiming it is like this the first few days until you train it better
https://www.reddit.com/r/GooglePixe...daptive_brightness_work_for/#thing_t1_e3yv49m
carloandreaguilar said:
And I found this link of people claiming it is like this the first few days until you train it better
https://www.reddit.com/r/GooglePixe...daptive_brightness_work_for/#thing_t1_e3yv49m
Click to expand...
Click to collapse
Yeah it could be the new implementation of the AI, I'm gonna use it for a few days to see if it gets better
This has started happening to me since yesterday. I've been using Pie for a month now (December update). What I've noticed is that it goes down to about 25% every time I cover the brightness sensor with my finger (usually when watching YT) and it stays there no matter what. It's pretty annoying having to always adjust it like that. Using "Sensors Monitor" app I see that the sensor is working correctly so it's a software "feature".
Any suggestions on how to mitigate it besides using "Velis Auto Brightness" app?
How do we know its 'AI'? Has it 'adapted' for anyone till now? That brings us tk the question, what was wrong with Auto Brightness in Oreo? Just because there's piece of code that's new, doesn't mean its versatile.
glasseffects said:
How do we know its 'AI'? Has it 'adapted' for anyone till now? That brings us tk the question, what was wrong with Auto Brightness in Oreo? Just because there's piece of code that's new, doesn't mean its versatile.
Click to expand...
Click to collapse
Three words.
Mar ket ing
Ashik_salim_ said:
Three words.
Mar ket ing
Click to expand...
Click to collapse
Yeah, and some of us would be fixing what was intentionally broke. Interesting, what would Android be without the community working as the underdog?
Oh, and AI (its Computational Intelligence) is the new cheaper, efficient corporate slave working to enslave the many.
is there a way to stop the external ( peak screen ) from turning on so frequently, it seen too sensitive
jaime4272 said:
is there a way to stop the external ( peak screen ) from turning on so frequently, it seen too sensitive
Click to expand...
Click to collapse
I agree it's a bit annoying compared to other Motorola models where Moto display at least can be set to quiet times. Last model I used where this function worked more smoothly was Moto Z4.
Already raised this to Motorola team as feedback, hopefully it can be fixed in upcoming software updates.
They don't give a f...
They persistently force users to use their own ****e version of AOD called Peek Display which is a total crap in practical usage. This damn thing used to light up every time I hit any bump while driving my car, I eventually had to turn this damn thing off!
Totally iritating, I'm really surprised they still implement this stuff in current form, and so few people complain.