What's new?
V4.05: Not much news, everybody is working on Android 4.4 KitKat. This version has only updated to newest CM10.2 sources.
WARNING:
When flashing V4.05 after full wipe the setup assist will crash. You need to flash V4.04, then setup everything, then flash V4.05 without full wipe. Only wipe cache and dalvik-cache. then it works.
SOLUTION
When the initial setup manager hangs press volume up or down.
When the volume bar appears press the icon on the left of the bar and settings will open.
In settings enable WiFi and connect to a WiFi network manually
Press the home button and initial setup manager will start again, but this time it will not hang.
To enable the navigation buttons in the status bar:
Settings->Interface->Expanded desktop->select "Status bar visible"
Settings->Interface->Status bar->check "Enable Navigation in status bar"
Press power button to get power menu ->click on "Expanded desktop"
To enable brightness control by swyping on the status bar:
Settings->Display->Brightness->disable automatic brightness control
Settings->Interface->Status bar->check “Brightness control”
What's this about?
This is the next release of my Ganbarou GT series of ROMs.
It is based on Android 4.3 and CM10.2 source code and flavoured to my own needs.
I build this ROM from sources for the Galaxy Tab 10.1 (GT-P7500/GT-P7501/GT-P7510/GT-P7511), the Galaxy S4 (GT-I9505) and (if my wife gives it back to me) the Galaxy Note (GT-N7000).
What's the difference to Cyanogenmod CM10.2?
There is no official CM10.2 ROM for the Galaxy Tab 10.1.
Initial differences to generic CM10.2 are:
Ganbarou wallpaper
Ganbarou bootanimation
Ganbarou About screen (Ganbarou changelog, Ganbarou version, Ganbarou easter egg)
Reboot and Recovery on top level of power menu
Navigation buttons can be placed left, right or centered on the lower bar
Added TitaniumBackup (in appsdata) for quick restore after you installed a new ROM
Added GooManager for updates of the ROM
Added JellyBean 4.3 compatible Google apps
Edited APN list to cover Softbank Japan
Adds free hosts file
Removed Cyanogenmod initialisation app
Removed Cyanogenmod updater
Removed Cyanogenmod wallpapers
Removed all live wallpapers
What are your risks with this ROM?
Code:
#include std_disclaimer.h;
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you do not understand the instructions how to flash the ROM move on
* and don't blame me if your device is bricked afterwords.
*/
How to install:
Get the ROM
From my homepageFrom Goo.IMFrom MegaFrom XDA-developers projects
Copy it to your internal SDcard
Reboot the tablet into recovery mode (CWM or TWRP, both works if you have the latest version)
In case you come from a ROM that is not Android 4.3 then a factory reset / full wipe is necessary. I recommend a full wipe in any case to get a clean installation.
Flash the ROM
Wipe cache and dalvik-cache
Reboot
Where can I download the ROM?
Obviously you skipped the "How to install" section. Check a few lines above for the instructions and download links.
If you are interested to build the ROM fresh from sources you can checkout my repository on Github.
Credits
Code:
Cyanogenmod (source)
infamousAOKP (kernel)
Changelog
Code:
Changelog V4.05
Update: latest CM10.2 sources.
Code:
Changelog V4.04
Update: latest CM10.2 sources.
Fix for tablet: WiFi connection problems (thanks to [URL="http://forum.xda-developers.com/showthread.php?t=2399999"]aaccount[/URL] findings)
Added build for GT-I9300 (Samsung Galaxy S3 Int.)
Changelog V4.03
Update: latest CM10.2 sources.
Update: New Android version: V 4.3.1.
Feature Tablet: Statusbar navigation menu button only visible if necessary.
Feature Tablet: Statusbar navigation back button changes when keyboard is open.
V4.02
Update: latest CM10.2 sources.
Feature Tablet: Navigation bar on right side of top bar in expanded desktop mode if enabled in Settings
Feature Tablet: Brightness control by swiping on status bar enabled for tablets
Update Tablet: Use latest infamous kernel source
V4.01 2013-09-19
Update: latest CM10.2 sources.
Update: latest ads free hosts file
BugFix: Camera now working on Galaxy Tab 10.1
V4.00 2013-09-14
Initial: first build based on CM10.2.
Feature: Ganbarou wallpaper
Feature: Ganbarou bootanimation
Feature: Ganbarou About screen (Ganbarou changelog, Ganbarou version, Ganbarou easter egg)
Feature: Reboot and Recovery on top level of power menu
Feature: Navigation buttons can be placed left, right or centered on the lower bar
Screenshots:
No big differences to CM10.2.
3G problem
Modem 3G is not working
Thanks
netman said:
Modem 3G is not working
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45577300. Don't know why copying this post and pasting it here made my post ended up at the cm10.2 thread. So here's the link instead.
Sent from my GT-P7500 using Tapatalk HD
netman said:
Modem 3G is not working
Thanks
Click to expand...
Click to collapse
Working fine on my tablet, as you can see on the screenshot in my first post. What modem do you have installed at the moment? Maybe you need to update the modem to the latest version?
Ok guys here i bring you the TabletUI back on GTab and android 4.3. I hope it works, cant test it at the moment.:angel: I attached two versions. The 2nd one is for reflashing of the boring PhabletUI. Try it out and give some feedback.
BeeGee_Tokyo said:
Working fine on my tablet, as you can see on the screenshot in my first post.
Click to expand...
Click to collapse
I can confirm, modem works fine here.
hanspampel said:
Ok guys here i bring you the TabletUI back on GTab and android 4.3. I hope it works, cant test it at the moment.:angel: I attached two versions. The 2nd one is for reflashing of the boring PhabletUI. Try it out and give some feedback.
Click to expand...
Click to collapse
Hello hanspampel,
Thanks for your work. Didn't try your patch yet, it is too late here.
You patched my source or the compiled ROM? Is it switchable or permanent? Can you share with me what you changed? I can try to bring it back to my ROM if it doesn't mess up the syncing with the original CM sources.
I patched your ROM. Its not switchable, its hardcoded. Like it was on CM10.1. So no chance of in app changing or something else. This is why i attached the PhabletUI too.
Ive found the code here.
Just got a message that the camera is not working. I confirmed on my tablet that it is true. Anbody out there with the camera working?
I am sorry for the problem. Will try to fix it asap and post a new version.
3g problem solved
eushaun99 said:
http://forum.xda-developers.com/showthread.php?p=45577300. Don't know why copying this post and pasting it here made my post ended up at the cm10.2 thread. So here's the link instead.
Thanks for the help. Problem is solved and now working
Click to expand...
Click to collapse
I'm looking to install this rom, any experiencies with it?
lexvandoef said:
I'm looking to install this rom, any experiencies with it?
Click to expand...
Click to collapse
After I fixed the bug with the camera I am running it since several weeks without problems.
BeeGee_Tokyo said:
After I fixed the bug with the camera I am running it since several weeks without problems.
Click to expand...
Click to collapse
Cool thnx for the effort! Have you compared it to CM10.1? I'm currently running cm10.1 on my galaxy tab 10.1 and I recently switched from cm10.1 to cm10.2 on my S4. I experienced more snappiness with 10.2 on the S4, I was wondering if this would give me a similar performance boost on my galaxy tab .
lexvandoef said:
Cool thnx for the effort! Have you compared it to CM10.1? I'm currently running cm10.1 on my galaxy tab 10.1 and I recently switched from cm10.1 to cm10.2 on my S4. I experienced more snappiness with 10.2 on the S4, I was wondering if this would give me a similar performance boost on my galaxy tab .
Click to expand...
Click to collapse
I am doing the Ganbarou ROM for the Galaxy Tab 10.1, the Galaxy Note and the Galaxy S4, because I own all three devices and I have the same good experience on all three devices.
BeeGee_Tokyo said:
I am doing the Ganbarou ROM for the Galaxy Tab 10.1, the Galaxy Note and the Galaxy S4, because I own all three devices and I have the same good experience on all three devices.
Click to expand...
Click to collapse
Yeah, I read that, cool bro!
But did you, by chance, compare it's performance to the performance on the previous version of android (4.2.2)? Is it snappier, of just on par?
lexvandoef said:
Yeah, I read that, cool bro!
But did you, by chance, compare it's performance to the performance on the previous version of android (4.2.2)? Is it snappier, of just on par?
Click to expand...
Click to collapse
My personal feeling is that Android 4.3 is snappier than 4.2.2. I didn't run any benchmarks and speed tests on the ROMs, as I always prefer to feel it in person. And I still think 4.3 is faster than 4.2.2.
But never forget, even if 4.3 is now officially released, there will come a lot of improvements before Android 5.0 is available as source! You might see some situations where the OS is slowing down or even crashing! But that is what Android is about! Continous improvement, release by release! And OPENSOURCE!!!!!!!!!!!!!!!!!!!!!!!!!!! That makes the difference to iOS and WindowsMobile (or whatever they call it now).
I flashed your rom, it looks ok since my first launch but please, fix your boot animation
kordellas said:
I flashed your rom, it looks ok since my first launch but please, fix your boot animation
Click to expand...
Click to collapse
Boot animation is working fine on my tablet. What recovery app are you using? I heard on Phils recovery on Android 4.3 the boot animation is not showing. Please update to CWM or TWRP recovery and it will show. That is a known problem.
Yeah i know, cool that you built this one, I'm gonna flash this tonight on my 10.1 tab en will be coming her regularly .
BeeGee_Tokyo said:
Boot animation is working fine on my tablet. What recovery app are you using? I heard on Phils recovery on Android 4.3 the boot animation is not showing. Please update to CWM or TWRP recovery and it will show. That is a known problem.
Click to expand...
Click to collapse
I didn't know our tab had PhilZ recovery.
Sent from my GT-P7500 using Tapatalk HD
Related
Development for this ROM has stopped.
Thread is therefor closed.
New thread with Android 4.3 ROM will come soon.
This ROM is my first trial to build a Android 4.2.1 ROM for the Samsung Galaxy Tab 10.1.
It is based on CyanogenMod 10.1 but flavored with my small own changes as usual.
GApps for JB 4.2 is included in the ROM.
FLASH THIS ROM ON YOUR OWN RISK! YOUR WARRANTY WILL BE GONE AFTER YOU FLASHED THIS ROM.
ONLY THE ROM FOR THE GALAXY TAB 10.1 3G (GT-P7500) IS TESTED BY ME. THE OTHER ROM VERSIONS ARE NOT TESTED.
Click to expand...
Click to collapse
Please check the XDA discussion thread for CM10.1 for additional requirements to use this ROM. Check there if you come from a ICS ROM, as you will need a new bootloader.
Click to expand...
Click to collapse
IMPORTANT:
IF YOU ARE NOT COMING FROM CM10.1 OR A GANBAROU 3.x ROM YOU NEED A FULL WIPE BEFORE INSTALLING THIS ROM!
BACKUP YOUR SD-CARD! THE WAY THE SD-CARD IS MOUNTED HAS CHANGED!
Click to expand...
Click to collapse
Reported bugs:
Gmail crash after flashing the ROM:
Update of Gmail from Google market should fix the problem.
Powerwidget in notification screen is not changeable.
Click to expand...
Click to collapse
Tips:
After flashing the tablet seems not to boot:
Give it time. I mean a long time!!! It will boot. First time I flashed this ROM I thought it would not work, but it just takes a long time to boot. The bootanimation will be seen only short time, then the screen turns black. Just wait until the setup screen pops up. But it should take longer than 5 minutes. If the bootanimation is shown for a long time and the tablet does not boot, try
1) reflash the ROM
2) check that the zip file was not damaged during download (you can find the md5 checksums for all ROMs on my homepage)
How to get Developer options in Settings:
Click on Build number several times until it says that you are a developer
How to enable MTP:
Settings->Storage->Menu (3 dots top right)->USB computer connection->Tick Media device (MTP)
Organisation SD-card:
The original content of your SD-card is now in sdcard0/0
This is related to users management and I cannot change it.
LongPress on home button, then move finger up opens Quick Launch (CM10.1 feature):
Access QuickLaunch when the navigation bar is not centered:
First train your thumb to access the QuickLaunch panel with the navigation bar centered. Press the home button, then move your thumb up and the Quick Launch will appear. After you got used to it move your Navigation Bar to the left or right (whatever you prefer). Press the home button and move your finger up. Then press again just above the Samsung logo in the middle and the Quick Launch will appear. Still working on a better solution.
Show Pie-chart control when in expanded desktop mode:
First you have to setup the position of the pie-chart navigation in settings and activated the expanded desktop. After activating you move your finger slowly from the outside of the screen into the screen to activate the pie chart (works on all 4 sides). Just try it and be patient to get used to it!
Click to expand...
Click to collapse
Changelog
Changelog V3.12 2013-06-11:
Update: Latest CM10.1 sources.
Bugfix: Settting for tablet_ui are back
Bugfix: GPS is working again
Click to expand...
Click to collapse
Changelog V3.11 2013-06-01:
Update: Latest CM10.1 sources.
Kernel: Switch back to Infamous Kernel
Feature: Profiles are available again
Changelog V3.10 2013-05-09:
Update: Latest CM10.1 sources.
BugFix: Settings->System on Galaxy Note (N7000)
BugFix: Battery drain problem. All credits go to grzwolf from Android-Hilfe.de. Check thread http://www.android-hilfe.de/5550736-post684.html
New: Bootanimation
Changelog V3.09 2013-04-27:
Update: Latest CM10.1 sources.
Feature: Added TV like screen-off animation.
Feature: Added Ganbarou changelog in Settings->About tablet.
Changelog V3.08 2013-04-17:
Update: Latest CM10.1 sources.
BugFix: Fixed bug in System Settings.
Kernel: Switched to INFAMOUSAOKP kernel.
Changelog V3.07 2013-04-07:
Update: Latest CM10.1 sources.
New Feature from CM: Expanded desktop. Hides both navigation bar and status bar to give more space to the application. Enable and setup in Settings->System. Activate in power menu. Check screenshots below.
Changelog V3.06 2013-03-24:
Update: Latest CM10.1 sources.
Bugfix: Switch from TabletUI to PhoneUI is available again.
New feature: LongPress on home button, then move finger up opens Quick Launch (CM10.1 feature) Difficult to do when Navbar is left or right and not centered, but possible. See screenshots below and read tip above.
Changelog V3.05 2013-03-17
Update: Latest CM10.1 sources (Android 4.2.2 R1).
Update: Small cosmetic change in Settings->System.
Changelog V3.04 2013-03-10
Update: Latest CM10.1 sources (Android 4.2.2 R1).
Update: Latest pershot kernel..
New feature: Added option to select position of Navigation bar (left, center, right) in the “standard” Phablet UI.
Bugfix: Corrected problem with TabletUI not working.
Cleanup: Updated rom_stats to send current country, even if it is a WiFi tablet.
Cleanup: Updated rom_stats to send WiFi if it is a WiFi tablet instead of unknown provider
Cleanup: Updated ads-free hosts file (credits to BSDgeek_Jake)
Changelog V3.03 2013-02-24:
Update: Latest CM10.1 sources (Android 4.2.2 now!)..
New feature: Added ROMstats to get some feedback how often my ROM is used. (Check here for more details)
Bugfix: MTP should now automatically be on after flashing.
Cleanup: Developer options and Performance tabs in Settings are now visible by default
Cleanup: Removed many developer options that are not important for most users
Changelog V3.02 2013-02-10:
Feature: Added default boot into Tablet UI or Phone UI depending on build.prop entry tablet.mode.
Bugfix: Fixed missing battery percentage.
Bugfix: Fixed wallpaper selection for lockscreen
Changelog V3.01 2013-02-02:
SystemUI: Added possibility to switch between tablet style and phone style.
Bugfix: Reboot from power menu is working now.
Updated to latest CM10.1 source.
Changelog V3.00 2013-01-20:
Ganbarou changes in Settings: Removed profiles, updates, statistics, changelog. Enabled screen on while charging even if a max time to lock is defined.
Ganbarou changes in Framework: Changed default wallpapers and power menu. Reboot & Reboot into Recovery direct accessible from power menu.
Ganbarou has GApps included!
Click to expand...
Click to collapse
Downloads:
From my homepage
From Goo.IM
Alternate download Teddy. Many thanks to Teddy for the mirror.
From GoogleDrive
Click to expand...
Click to collapse
Source:
All available on Github. Make sure you checkout my read-me files which describes how to make the ROM and explains the tools I use.
Repository - make sure you checkout branch jb-4.2
Tools - will be checked out with the repository, but please check the read-me file for additional information
Click to expand...
Click to collapse
Credits:
pershoot for his hard work
Cyanogen for his amazing ROM
CyanogenMOD Team for their awesome work
SGT7 for the code to switch between TabletUI and PhoneUI
mcbyte_it for the ROM statistics application
grzwolf for the bugfix in the kernel.
Infamous team for their Infamous Kernel!
Click to expand...
Click to collapse
Thank you so much for your work!!! Keep it up!
Just GREAT WORK
Runs like a charm! Many THX for sharing!
Up and running
One Bug!? Mine will not shut down and reboot on Power Menu! I need App Quick Boot to restart....
Shutdown works for me, restart doesn't.
Petteri said:
One Bug!? Mine will not shut down and reboot on Power Menu! I need App Quick Boot to restart....
Click to expand...
Click to collapse
teddybaerd said:
Shutdown works for me, restart doesn't.
Click to expand...
Click to collapse
:angel: Really How could that happen
Found a small typo in the source code where I changed the power menu looks. That causes Reboot not to work. Will make update next weekend and correct it.
Haha, sh*t happens. Not that prob. How can I fix it?
teddybaerd said:
Haha, sh*t happens. Not that prob. How can I fix it?
Click to expand...
Click to collapse
As shown at Android-Hilfe.de you need to change the source code and then recompile the ROM. It is not possible to fix it on the finished ROM.
Where are Developer Options in Settings!? Couldn`t find points for example: USB-Debugging, etc...
EDIT: ahhhhh, sorry i forget the Trick on JB 4.2!
OK for everyone who wants to activate Developer Options:
Go to Settings-About Phone and tip 7times on Build Number, this activates it!
Modem
Modem is full functional, call and receiving calls? Thanx
Petteri said:
Where are Developer Options in Settings!? Couldn`t find points for example: USB-Debugging, etc...
EDIT: ahhhhh, sorry i forget the Trick on JB 4.2!
OK for everyone who wants to activate Developer Options:
Go to Settings-About Phone and tip 7times on Build Number, this activates it!
Click to expand...
Click to collapse
That's under "Tricks" in post #1
sogol said:
Modem is full functional, call and receiving calls? Thanx
Click to expand...
Click to collapse
Sorry, I have a data-only SIM card and a phone. I am not testing phone functions on the tablet.
BeeGee_Tokyo said:
That's under "Tricks" in post #1
Sorry, I have a data-only SIM card and a phone. I am not testing phone functions on the tablet.
Click to expand...
Click to collapse
Thank you for answering
Hi BeeGee, I enjoyed your previous works. I dare to ask a favour...
I wonder if you can investigate the well-known Veetle HD video problem of CM10/10.1 based roms. Maybe you'll find a way to solve this strange thing: why videos in HD mode start for a second and then suddenly stop.
Thanks and excuse me if my question is of minor importance, but that app is very important to me.
Respect and keep up the good work! :good:
Hi BeeGee just wondering when you say "CyanogenMod 10.1 but flavored with my small own changes as usual".
What are the advantages with your Flavors over CyanogenMod 10.1.
Pep
jonsat said:
Hi BeeGee, I enjoyed your previous works. I dare to ask a favour...
I wonder if you can investigate the well-known Veetle HD video problem of CM10/10.1 based roms. Maybe you'll find a way to solve this strange thing: why videos in HD mode start for a second and then suddenly stop.
Thanks and excuse me if my question is of minor importance, but that app is very important to me.
Respect and keep up the good work! :good:
Click to expand...
Click to collapse
Sorry, I do not know the Veetle HD problem. Is Veetle a specific video player for Android? Id can't find it in the market. Please give me some more details.
Pep71 said:
Hi BeeGee just wondering when you say "CyanogenMod 10.1 but flavored with my small own changes as usual".
What are the advantages with your Flavors over CyanogenMod 10.1.
Pep
Click to expand...
Click to collapse
Mainly written in the Changelog of post #1:
Removed some stuff (like report to CM, profiles, changelog, wallpapers)
Changed power-off menu so that reboot and recovery are direct accessible
Added my own wallpaper selection
Added Gapps into the ROM
BeeGee_Tokyo said:
Sorry, I do not know the Veetle HD problem. Is Veetle a specific video player for Android? Id can't find it in the market. Please give me some more details.
Mainly written in the Changelog of post #1:
Removed some stuff (like report to CM, profiles, changelog, wallpapers)
Changed power-off menu so that reboot and recovery are direct accessible
Added my own wallpaper selection
Added Gapps into the ROM
Click to expand...
Click to collapse
Thank you....... Sorry I missed that
Installing as I type.
Pep
Pep71 said:
Thank you....... Sorry I missed that
Installing as I type.
Pep
Click to expand...
Click to collapse
I got reported a problem about Gmail crashing after dlashing this ROM. You might need to update GMail through Google market, that should fix the problem.
BeeGee_Tokyo said:
Sorry, I do not know the Veetle HD problem. Is Veetle a specific video player for Android? Id can't find it in the market. Please give me some more details.
Click to expand...
Click to collapse
Hi BeeGee, Veetle is a video streaming app, similar to Netflix, to watch videos broadcasted by users.
https://play.google.com/store/apps/details?id=com.veetle.android.lite
Maybe is unavailable in your area? Check also veetle.com.
Thanks!
jonsat said:
Hi BeeGee, Veetle is a video streaming app, similar to Netflix, to watch videos broadcasted by users.
https://play.google.com/store/apps/details?id=com.veetle.android.lite
Maybe is unavailable in your area? Check also veetle.com.
Thanks!
Click to expand...
Click to collapse
I finally found it and had a quick check on it. The logcat shows that veetle is waiting for some response which seems not to come and then it ends the play. A report is send in the background to veetle.com. So I guess that they are aware of the problem. Not sure if I can do anything in the ROM to solve the problem. Veetle might have a problem with Android 4.2. I saw on the Google market that a lot of users are complaining about problems.
Sorry, I don't think I can help here.
PS:
I tried it on my Galaxy Note which is running Android 4.1 (CM10 based) and Veetle works there without problems.
Unfortunately I do not have a Android 4.2 ROM for my Note yet.
Maybe the problem is a combination of Android 4.x and tablet? Or a problem of the proprietary camera drivers coming from older Android version?????
So I'm a new dev and I just compiled Paranoid Android fresh from the source and if anyone wants they can give this ROM a try.
PARANOID ANDROID 3.1 for i9300 only!!
Things known that are semi broken-->
Hybrid Properties (you tell me)
How to flash-->
Unfortunately a wipe is REQUIRED even if you're coming form 4.2/4.1 etc!!!!!!!
Update your recovery to the latest version. Pre 4.2 recoveries can mess up your sd card. TWRP is recommended
THERE IS NO OFFICAL GAPPS FOR 4.2.2 YET
Do not restore system apps, system data and Google apps. This can cause bootloops and other problems due to mismatches from CM to AOSP and Android version 4.1.2 to 4.2.
Downloads ---->
Gapps
http://goo.im/gapps/gapps-jb-20121212-signed.zip
The ROM
https://www.dropbox.com/s/9riglqizo174p8y/pa_i9300-3.10-01MAR2013-201020(vibs).zip?m
FEATURES (Copied from PA change logs)
Hybrid engine ported, Per App DPI and Per App Layout
Tablet UI back from the dead
Per app color
Quicksettings -> Quicktoggles (first draft, more to follow)
New recents implementation
We fixed the aosp lag in the recents view, well, most of it
New SystemUI Icons that can cope with transparent bars, thanks go to John Xionidis
See through Lockscreen is back
Transparent bars + Launcher2 modified to cope with it
4.2 Walls and Sounds
Google stock apps
Extended Desktop
Credits--->
PA
AOKP
Google
And gokussjx (for amazing compiling tutorial)
Be aware that this rom has lots of bugs.
Please back up.
Disclaimer:
I'm not responsible for anything that happens to your phone. THIS IS FOR i9300 only
PARANOID ANDROID IS PARANOID ANDROID'S CODE I JUST SIMPLY COMPILED THE ROM.
First!
Second!
Features? Whats different from original paranoid? screenshots? more informations would be nice.
installation error
So this has the expandable Pie Notifications?
Nice. :good:
Didn't work. Full wipe. Omega 43. Trying again.
Question/Concern
marcinq24 said:
installation error
Click to expand...
Click to collapse
Are you using latest version of TWRP? / CWM?
Did you wipe?
Indigoreli said:
First!
Click to expand...
Click to collapse
THX for spam ... :crying:
Answer
jjshinobi said:
Didn't work. Full wipe. Omega 43. Trying again.
Click to expand...
Click to collapse
Check to see if your TWRP is updated to the latest version.
How do I access hands free activation on this Rom? We just bought this phone and it had this Rom on it already and we can't get the line to activate.
Sent from my EVO using xda app-developers app
TheMasahiro said:
Features? Whats different from original paranoid? screenshots? more informations would be nice.
Click to expand...
Click to collapse
You have all information needed in OP. This is a raw pa compilation.
Hi all,
Sbrissen and darkman kindly allowed me the use of their hard work to port CM10.2 rom to our N8020. These have recently become nightly official builds thanks to Sbrissen whose work it is I am porting.
At this time there is no way to add tablet mode..but I will look into it.
Head on over to the original threads to say thanks and/or donate and just hit the button for me as I don't do donations.
here's Sbrissens original thread: http://forum.xda-developers.com/showthread.php?t=2413149
Also, thanks darkman for his install script which I modified the UI messages on and this uses the original optus modem software from my stock tablet rom.
Many thanks to @wwwcase for finding the fix to the apn and play store bugs and to @Simon94 for his very real dev work on our device
Please remember I am not a dev and have only modified the basic stuff to work on our variation of the note 10.1 and as such will ignore requests. I have a very busy real life and will only keep up with original releases at my own pace.
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
From the original thread...
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 10.2 to your Galaxy Note 10.1 N8020, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Reboot
BUGS
-no way to enable tablet ui which is being phased out anyway (doh).
-Occasional graphic glitches loading apps (minor).
-let me know
-no pie controls working
-no torch working
DOWNLOADS
NIGHTLIES
21/8/2013 nightly ROM http://d-h.st/l6R
26/8/2013 nightly ROM http://d-h.st/cIe
30/08/2013 nightly ROM http://d-h.st/JFV
2/9/2013 NIGHTLY http://d-h.st/4al
3/9/2013 nightly ROM http://d-h.st/lsc
6/09/2013 nightly ROM http://d-h.st/0Fv
8/9/2013 nightly ROM http://d-h.st/qSR
14/9/2013 nightly ROM http://d-h.st/fle
9/10/2013 nightly ROM http://d-h.st/SmL
5/11/2013 NIGHTLY ROM 3/11/2013 reuploaded with fixed play store and apn settings http://d-h.st/cEv
Gapps: http://goo.im/gapps
SU should be fixed now (thanks to Sbrissen) but if you have any problems you need to do a couple of things to activate it.
Activate the developer options menu item and thus activate the menu item for the USB debugging, you have to open your phone’s settings menu. Then navigate to the “About phone” settings page. There you will find a sub-item called “build number”. If you click 7 times on the build number item, the developer options will be unlocked. After successful activation you will find the item developer options in the usual place in the Android settings menu. To enable superuser active, switch on usb debugging and make sure root access is set for apps and adb. Reboot may be necessary. Your root should be back now!
PLEASE HIT THANKS IF I HELPED
It's great to see CM 10.2 for this device already. Any idea if this might work on the 8013?
direwolf1 said:
It's great to see CM 10.2 for this device already. Any idea if this might work on the 8013?
Click to expand...
Click to collapse
No sorry, the lte version has different partitioning and is incompatible with the gsm/wifi versions...sorry mate!
Hello,
the ROM works fine! Thanks your for your work!
After using it for some days I recognized the following things:
1. App flashlight does not work
2. Cyanogen File Manager: ONLY "Save rights" are available in preferences (grey)
Superuser access and rooting works and I have done all the other couple of things to activate it.
3. Is there any possibility to use samsung keyboard? Its not implemented and I don´t know, which files and APK´s are necessary
martesch said:
Hello,
the ROM works fine! Thanks your for your work!
After using it for some days I recognized the following things:
1. App flashlight does not work
2. Cyanogen File Manager: ONLY "Save rights" are available in preferences (grey)
Superuser access and rooting works and I have done all the other couple of things to activate it.
3. Is there any possibility to use samsung keyboard? Its not implemented and I don´t know, which files and APK´s are necessary
Click to expand...
Click to collapse
Just type in sammy keyborad for cm 10 in the search bar.there are some flashable keyboards you will find
Portugal
I´m from Portugal and I have a 4G Samsung Galaxy Tab 10.1 wich is the definition of Mobile network settings that I have to use
Thank you very much for this rom
S Note
where can I find S Note apk to work with this rom
AF1969 said:
where can I find S Note apk T9 work with this rom
Click to expand...
Click to collapse
You wont find it. It has not been ported yet.
S—Pen
When (+/—) this rom will suport S—Pen?
When you port it I guess...lol
Sent from my GT-I9300 using Tapatalk 4
Great News!
Thanks for your good work!
I tried the new ROM 4.3 and I had the following problem:
1.The extern BT keyboard (Witspad, bluetooth 3.0 interface) has no function, although the device drivers are loaded and active (preferences menu)
When using ROM 4.2.2 no problems at all!
Any idea?
Will this work on an 8013 wifi...?
Philly Jim said:
Will this work on an 8013 wifi...?
Click to expand...
Click to collapse
I have no idea. Try and see? But take a backup first!
Sent from my GT-N8020 using Tapatalk 4
cm-10.2-20130903-NIGHTLY wont boot up Full wipe/cache wipe/flashing previous version first and wiping wont do it either.
webbimato said:
cm-10.2-20130903-NIGHTLY wont boot up Full wipe/cache wipe/flashing previous version first and wiping wont do it either.
Click to expand...
Click to collapse
I will look into it and fix it, sorry. Did not have time to test this time..
UPDATE, mistake in build.prop which I fixed now. Thanks for catching that and I will stop being lazy in future
New build is uploaded now. Enjoy!
Sent from my GT-N8020 using Tapatalk 4
No, you're not lazy. You are the only hope for our tablets Thank you for your time to port CM love to 8020. I was making the change for tablet z just because no one was offering cyanogenmod. It was probably the last time I was going to check the situation when I noticed cm10.1 port and I started using my tablet again
Oh and latest 4/9/13 works! Yay!
smegg said:
Hi all,
Please remember I am not a dev and have only modified the basic stuff to work on our variation of the note 10.1 and as such will ignore requests. I have a very busy real life and will only keep up with original releases at my own pace.
Click to expand...
Click to collapse
Hey just remember that the "modifier" allso are important. A big thanks
I only have one question, how stabel is the last version?
tnielsen said:
Hey just remember that the "modifier" allso are important. A big thanks
I only have one question, how stabel is the last version?
Click to expand...
Click to collapse
Seems solid as a rock to me! Sbrissen has done a superb job!
Sent from my GT-N8020 using Tapatalk 4
Problems with phone network
I have a problem my N8020 says that the phone company is Verizon Wireless, but I'm using Telia Denmark and it is not possible to get online.
It shows the icon as if there is a Verizon Wireless but i'm in Denmark and there is no Verizon here and my SIM card is from Telia
What's new?
V4.05: Not much news, everybody is working on Android 4.4 KitKat. This version has only updated to newest CM10.2 sources.
WARNING: CM10.2 / Android 4.3 has problems with the APN settings. If you cannot get 3G data connection, you need to add the APN manually. Follow the advice in this post on XDA.
To enable the navigation buttons in the status bar:
Settings->Interface->Expanded desktop->select "Status bar visible"
Settings->Interface->Status bar->check "Enable Navigation in status bar"
Press power button to get power menu ->click on "Expanded desktop"
To enable brightness control by swyping on the status bar:
Settings->Display->Brightness->disable automatic brightness control
Settings->Interface->Status bar->check “Brightness control”
What's this about?
This is the next release of my Ganbarou GT series of ROMs.
It is based on Android 4.3 and CM10.2 source code and flavoured to my own needs.
I build this ROM from sources for the Galaxy Tab 10.1 (GT-P7500/GT-P7501/GT-P7510/GT-P7511), the Galaxy S4 (GT-I9505) and (if my wife gives it back to me) the Galaxy Note (GT-N7000).
What's the difference to Cyanogenmod CM10.2?
There is no official CM10.2 ROM for the Galaxy Tab 10.1.
Initial differences to generic CM10.2 are:
Ganbarou wallpaper
Ganbarou bootanimation
Ganbarou About screen (Ganbarou changelog, Ganbarou version, Ganbarou easter egg)
Reboot and Recovery on top level of power menu
Navigation buttons can be placed left, right or centered on the lower bar
Added TitaniumBackup (in appsdata) for quick restore after you installed a new ROM
Added GooManager for updates of the ROM
Added JellyBean 4.3 compatible Google apps
Edited APN list to cover Softbank Japan
Adds free hosts file
Removed Cyanogenmod initialisation app
Removed Cyanogenmod updater
Removed Cyanogenmod wallpapers
Removed all live wallpapers
What are your risks with this ROM?
Code:
#include std_disclaimer.h;
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you do not understand the instructions how to flash the ROM move on
* and don't blame me if your device is bricked afterwords.
*/
How to install:
Get the ROM
From my homepageFrom Goo.IMFrom MegaFrom XDA-developers projects
Copy it to your internal SDcard
Reboot the tablet into recovery mode (CWM or TWRP, both works if you have the latest version)
In case you come from a ROM that is not Android 4.3 then a factory reset / full wipe is necessary. I recommend a full wipe in any case to get a clean installation.
Flash the ROM
Wipe cache and dalvik-cache
Reboot
Where can I download the ROM?
Obviously you skipped the "How to install" section. Check a few lines above for the instructions and download links.
If you are interested to build the ROM fresh from sources you can checkout my repository on Github.
Credits
Code:
Cyanogenmod (source)
infamousAOKP (kernel)
Changelog
Code:
Changelog V4.05
Update: latest CM10.2 sources.
Code:
Changelog V4.04
Update: latest CM10.2 sources.
Fix for tablet: WiFi connection problems (thanks to [URL="http://forum.xda-developers.com/showthread.php?t=2399999"]aaccount[/URL] findings)
Added build for GT-I9300 (Samsung Galaxy S3 Int.)
Changelog V4.03
Update: latest CM10.2 sources.
Update: New Android version: V 4.3.1.
Feature Tablet: Statusbar navigation menu button only visible if necessary.
Feature Tablet: Statusbar navigation back button changes when keyboard is open.
V4.02
Update: latest CM10.2 sources.
Feature Tablet: Navigation bar on right side of top bar in expanded desktop mode if enabled in Settings
Feature Tablet: Brightness control by swiping on status bar enabled for tablets
Update Tablet: Use latest infamous kernel source
V4.01 2013-09-19
Update: latest CM10.2 sources.
Update: latest ads free hosts file
BugFix: Camera now working on Galaxy Tab 10.1
V4.00 2013-09-14
Initial: first build based on CM10.2.
Feature: Ganbarou wallpaper
Feature: Ganbarou bootanimation
Feature: Ganbarou About screen (Ganbarou changelog, Ganbarou version, Ganbarou easter egg)
Feature: Reboot and Recovery on top level of power menu
Feature: Navigation buttons can be placed left, right or centered on the lower bar
Screenshots:
No big differences to CM10.2.
thanks new rom downloading... some screen sot
galaxys s said:
thanks new rom downloading... some screen sot
Click to expand...
Click to collapse
No visual differences to CM10.2 ROMs. My mods are under the hood. See differences list.
herna said:
Just to ask: you can call it a custom ROM? The differences are so little referred to Cyanogenmod 10.2, just added bootanimation and wallpapers, and added apps, that are not enough changes for be a ROM like ParanoidAndroid, PAC-man ROM, SlimROM or CarbonROM. Just my opinion. And also you released all versions today for all devices, it has not sense to say you compile for so much devices.
Enviado desde mi GT-N7000 usando Tapatalk 4
Click to expand...
Click to collapse
PACman, SlimROM, CarbonROM are developer teams with several members, I am a single person team. And there are changes like Navbar moveable on tablet ROMs, Recovery Reboot on top of shut-down menu and other things as you can see in the changelog. Wait for more.
And I own the Galaxy Tab 10.1, the Galaxy Note and the Galaxy S4, so it is logical to publish ROMs for all the devices I own. Every compilation for the 6 devices takes me 1.5 hours, not to talk about the time it takes to test them.
If you have a problem with that, just do changes to the source by yourself, compile and test them successfully, and then post here again.
Didn't read any restriction here on XDA that do not allow me to post my ROMs.
Please take one of the mentioned ROMs and stop spamming my thread.
Thank you!
V4.02 available
What's new?
V4.02: New changes are for tablets, see change log below, updated to newest CM10.2 sources.
WARNING: CM10.2 / Android 4.3 has problems with the APN settings. If you cannot get 3G data connection, you need to add the APN manually. Follow the advice in this post on XDA.
To enable the navigation buttons in the status bar:
Settings->Interface->Expanded desktop->select “Status bar visible”
Settings->Interface->Status bar->check “Enable Navigation in status bar”
Press power button to get power menu ->click on “Expanded desktop”
To enable brightness control by swyping on the status bar:
Settings->Display->Brightness->disable automatic brightness control
Settings->Interface->Status bar->check “Brightness control”
Android V4.3.1 == Ganbarou V4.03
Update: latest CM10.2 sources.
Update: New Android version: V 4.3.1.
Feature Tablet: Statusbar navigation menu button only visible if necessary.
Feature Tablet: Statusbar navigation back button changes when keyboard is open.
Updated to newest CM10.2 sources and Android 4.3.1. Improved behaviour of the navigation integration to the status bar. Menu button will be only visible if necessary and back button icon changes if keyboard is visible.
Download links in first post
New version 4.04
What's new?
V4.04: Updated to newest CM10.2 sources and Android 4.3.1.Fixed WiFi problems for Galaxy Tab 10.1. Added build for Samsung Galaxy S3 aka GT-I9300.
WARNING: CM10.2 / Android 4.3 has problems with the APN settings. If you cannot get 3G data connection, you need to add the APN manually. Follow the advice in this post on XDA.
Changelog
Code:
Changelog V4.04
Update: latest CM10.2 sources.
Fix for tablet: WiFi connection problems (thanks to [URL="http://forum.xda-developers.com/showthread.php?t=2399999"]aaccount[/URL] findings)
Added build for GT-I9300 (Samsung Galaxy S3 Int.)
Are you sure you're allowed to include Google apps on your ROM?
Sent from my GT-N7000 using Tapatalk
projeto56 said:
Are you sure you're allowed to include Google apps on your ROM?
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Are you sure you are allowed to flash Google Apps on top of a custom ROM?
Are you sure you are allowed to flash a custom ROM to your Galaxy Note?
Cmon man. I really mean it. Doesn't it goes against Google rules?
Loved your ROM name BTW
Sent from my GT-N7000 using Tapatalk
projeto56 said:
Cmon man. I really mean it. Doesn't it goes against Google rules?
Loved your ROM name BTW
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Why do you think Cyanogenmod ROMs come without Google apps? Because Google warned them not to include the Gapps. But that's because Cyanogemod ROMs are flashed on 10 thousands of android devices and some of them don't have originally the Gapps on them.
My ROM is flashed just 500 times and all devices are coming originally with Gapps installed. Therefor I don't think it is illegal.
Awesome
Much easier to update
Sent from my GT-N7000 using Tapatalk
About OmniROM
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This roms works for the Samsung Galaxy Music GT-S6010/L and probably the DUOS variants too but this rom won't get dual sim working (only cm 11). Also the rom is buggy.
Source
Tree: https://github.com/Alonso1398/android_device_samsung_ivoryss/tree/omni-4.4
Kernel: https://github.com/Alonso1398/muZic_kernel_ivoryss/tree/cm-11.0
Vendor files: https://github.com/Alonso1398/proprietary_vendor_samsung_ivoryss
Patches:
Patch to hardware/broadcom/libbt for bluetooth to work: https://gist.github.com/pawitp/7891380.
Patch to frameworks/native to workaround hwc issues: (first replace with the cyanogenmod source and edit slightly to avoid compilation errors, then apply the patches):https://gist.github.com/pawitp/7891444 (replace each time it says CAPRI with RHEA) and https://github.com/PAC-man/android_frameworks_native/commit/0c81fda74f6e7f9dc5f48bd00e4dbeaef12fdbc2.
Patch to frameworks/av to fix audio/video issues: https://gist.github.com/pawitp/7945188
Patch to hardware/libhardware/include/hardware/audio.h for microphone to work: https://gist.github.com/dhinesh77/7206ec7900bee32e4c51/revisions and https://gist.github.com/Alonso1398/5235627ad9c73692b1d0 to system/core
Credits/thanks
Dhinesh77's device tree and work
Pawitp's patches
Omnirom Team
XDA forum
Agaphetos for his mdpi/ldpi omniroom bootanimation
Requirements
-Have Stock 4.1 or other rom (but not stock 4.0)
-TWRP recovery. Not tested yet with cwm.
Installation Instructions
-Make a backup just in case
-Wipe data/factory reset
-Install the rom
-Optionally install gapps (choose the package that suits you better)
-Install optionally supersu and root
Bugs/What's not working?
-Probably other features I may not use frequently
-Bluetooth half working
-Screen recording
-Activity indicator option
Download links
MEGA: https://mega.nz/#!kBxHSZIY!FmVERxhKPb07Ww4HDYGB7jYCl7Dy4pfDfiDzoOzJgGk
Dropbox: https://www.dropbox.com/s/4gchpvhgho6f52x/Omnirom 4.4 ivoryss final release.zip?dl=0
You can download other versions here
Changelog
RC 4 (final release)
-Not sure what fixed, but rom is smoother now
-Use correct overscroll glow (grey) and text select handle (blue) instead the orange ones. I think they were used from gingerbread.
-Removed OpenDelta.apk because it was not necessary for us
RC 3
-Make lockscreen widget bigger (clock will now look complete)
-Enable lockscreen widget options in low ram mode
-Some kernel perfomance improvements
RC 2
-Fix microphone
RC 1
-Fixed ril related issues (fixes calls, network search and mobile network)
-Enabled low ram and enabled lock screen widgets on low ram mode
Beta 1
-Initial release
Some notes
-If you want to use the max widget on lock screen, you must disable low ram and after enabling it, you can enable low ram again
-There is no theme engine on this rom, however you can use xposed module hk themer however not all themes will work.
Ok, this is the first not CM based rom for our phone however it is not ready for daily use. If I were able to fix bugs and be as stable as CM 11, i think could bring other roms like slimkat, dirty unicorns, etc...
Also I haven't forgot lollipop, cwm for lollipop showed a black screen and then rebooted and the rom didn't flashed on twrp (I will have to update it and I hope that was the problem) so it won't be coming soon. Also I'm building omni 4.4 because I want omni 5.X, so I may learn to fix bugs before moving directly to 5.X
Edit: Fixed ril related problems (mobile network, calls and network search) (credits to k2wl). Still need to check video recording and also should apply patche to fix system update service wake lock. A RC will be available soon . Also about lollipop progress, updated twrp (will post it soon) but still gave flashing errors, I think I will try cm 12.0 instead of 12.1
Edit2: mmm I think the system update service thing wasn't on omnirom... also noticed that microphone is not working even with dhinesh77 patch :-/
ok fixed microphone and on cm 12 too. Now it is mostly stable and maybe the next attempt should be slimkat
Ok, posted RC 3 for Omnirom and sadly I think it'll be my last omni 4.4 version soon I will stop development because i won't have too much free time. So before that, I'll release a cm 11 version with the lockscreen widget bigger and kernel perfomance changes. Then I MAY release a cm 12.1 (just source updates) and omni 5.1 version. I won't bring marshmallow (sorry about that guys ). Then that would be my good bye. It was a pleasure trying to bring some excitement to this device and give alternatives to the stock touchwiz rom. Also sorry for not being able to fix bluetooth, it gave unusual problems.
Alonso1398 said:
Ok, posted RC 3 for Omnirom and sadly I think it'll be my last omni 4.4 version soon I will stop development because i won't have too much free time. So before that, I'll release a cm 11 version with the lockscreen widget bigger and kernel perfomance changes. Then I MAY release a cm 12.1 (just source updates) and omni 5.1 version. I won't bring marshmallow (sorry about that guys ). Then that would be my good bye. It was a pleasure trying to bring some excitement to this device and give alternatives to the stock touchwiz rom. Also sorry for not being able to fix bluetooth, it gave unusual problems.
Click to expand...
Click to collapse
Thank you! I had been thinking of asking you to do a CM11 refresh with a source update because there have been a lot of security fixes in the interim but I didn't because I know you're short on time (and RC5 does work perfectly apart from that lockscreen widget issue) but thank you for all your time, effort and hard work on this tiny little device. Brilliant work! :good:
Will be looking forward to that CM11 refresh. Thank you! :good:
rahimali said:
Thank you! I had been thinking of asking you to do a CM11 refresh with a source update because there have been a lot of security fixes in the interim but I didn't because I know you're short on time (and RC5 does work perfectly apart from that lockscreen widget issue) but thank you for all your time, effort and hard work on this tiny little device. Brilliant work! :good:
Will be looking forward to that CM11 refresh. Thank you! :good:
Click to expand...
Click to collapse
Posted new cm 11. And your welcome, I enjoyed working with this device:good:
Edit: There another few things I want to do with kitkat. I think I can fix the overscroll color (gray instead of orange) and maybe something related to smoothness