Database Develop

About your Boot Img errors!

Hi, I have heard a few of you have been getting error when Flashing a boot img recovery and fastboot.
Today I noticed the same thing to my device. I fixed it....
Here's how
1. Download This KDZ
Clockwork Recovery Rom.kdz
2. Download KDZ_UPD_En
From Here: KDZ_upd_fw_en
3. Extract the KDZ zip you downloaded and run KDZ_Updater.exe
4. In the dropdown menu's select 3GQPT and If your phone is running select DIAG
5. Open the clockwork recovery rom.kdz hit the open button and find it in your file directories.
6. Then Select Update now.
[TIPS] - If you are using a PC use the back ports of the PC
- If the update fails restart your PC and do steps 4 and 5 again.
- If your update doesn't finish and your phone doesn't work, keep trying again
Wait for it to finish
After it has finished.
1. Your phone may not boot if you came from a custom rom. Reboot into fastboot and type Command in CMD: (Make Sure you have fastboot and fastboot drivers installed) (My fastboot is in C:\Android
cd C:\Android
fastboot -w (wipe all data)
2. Download CWM recovery img from here
3. Rename the img to recovery.img that you just downloaded
4. Copy that to where your fastboot is setup. eg mine is in C:\android
5. Type commands: fastboot flash recovery recovery.img
6. Then type Fastboot reboot
Now reflash you rom and you should have no errors

airbus360 said:
Hi, I have heard a few of you have been getting error when Flashing a boot img recovery and fastboot.
Today I noticed the same thing to my device. I fixed it....
Here's how
1. Download This KDZ
Clockwork Recovery Rom.kdz
2. Download KDZ_UPD_En
From Here: KDZ_upd_fw_en
3. Extract the KDZ zip you downloaded and run KDZ_Updater.exe
4. In the dropdown menu's select 3GQPT and If your phone is running select DIAG
5. Open the clockwork recovery rom.kdz hit the open button and find it in your file directories.
6. Then Select Update now.
[TIPS] - If you are using a PC use the back ports of the PC
- If the update fails restart your PC and do steps 4 and 5 again.
- If your update doesn't finish and your phone doesn't work, keep trying again
Wait for it to finish
After it has finished.
1. Your phone may not boot if you came from a custom rom. Reboot into fastboot and type Command in CMD: (Make Sure you have fastboot and fastboot drivers installed) (My fastboot is in C:\Android
cd C:\Android
fastboot -w (wipe all data)
2. Download CWM recovery img from here
3. Rename the img to recovery.img that you just downloaded
4. Copy that to where your fastboot is setup. eg mine is in C:\android
5. Type commands: fastboot flash recovery recovery.img
6. Then type Fastboot reboot
Now reflash you rom and you should have no errors
Click to expand...
Click to collapse
You are the best!!!
Gonna try it out!!
I got a problem!!
Everytime i type fastbot (something)
it says fastboot is not a command!!
Any help???
I didn't try it now cause i am in the middle of
doing the battery tweak!!!
But before thats what it said!!
I typed fastboot -w
and it said it is not a command!!!

androidboss7 said:
You are the best!!!
Gonna try it out!!
I got a problem!!
Everytime i type fastbot (something)
it says fastboot is not a command!!
Any help???
I didn't try it now cause i am in the middle of
doing the battery tweak!!!
But before thats what it said!!
I typed fastboot -w
and it said it is not a command!!!
Click to expand...
Click to collapse
Have u got adb installed? if not go to android developers com and download it. Then change you directory to where u installed adb, example, put it in your c drive and type cd C:\android-sdk\sdk\tools >Enter>
then do the commands

airbus360 said:
Have u got adb installed? if not go to android developers com and download it. Then change you directory to where u installed adb, example, put it in your c drive and type cd C:\android-sdk\sdk\tools >Enter>
then do the commands
Click to expand...
Click to collapse
Thanks and I so have fastboot installed but maybe not sdk!!
Edit: i did your steps from 1-6 and now my phone is stuck on the android boot logo!!!!
Is this2.1 stock?? Also there is no mode called 3 GQPT!!
I followed all the instrutions and now my phone is stuck on the android logo!!!
Please help!!! (Its been quite a while)
Edit2: Sorry my fault i didn't do fastboot -w!!
It would be good if you wrote that on your post!!!
And i am thinking of staying on stock 2.1 !!!

Please Help Tried Updating to 4.4 Kitkat Bricked

Ok so I tried updating my phone that was already rooted on Android 4.3 S-OFF to 4.4 kitkat with sinless rom sense. Transferred the rom zip to my phone, then proceeded to wipe the system and data, as well as davalik cache with clockworkmod recovery. Attempted to flash the rom and it aborted. Tried a few times and nothing worked. Didn't realize till after that my phone had no OS, and now all I can do is enter the bootloader. Can't enter recovery as the phone will enter clockworkmod then abort and reboot the phone. Not sure what to do at this point as I tried one of the guides and couldn't figure it out. If anyone can help me I'd greatly appreciate it. At least I backed everything up on my computer manually and am using my iPhone 4 until I can get this fixed. Thanks in advance.

Try reflashing recovery then if that works ad b push or usb otg a working Rom to your phone
Sent from my HTC One using Tapatalk

nathlynn22 said:
Try reflashing recovery then if that works ad b push or usb otg a working Rom to your phone
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
How do I reflash recovery when I can't access the filesystem? Do I need to setup ADB and connect to my phone via command line to initiate the transfer? Can you link me to a thread that explains how to setup ADB in a case like this? Thanks

You need to reflash cwm. I'll try find a link. But after recovery is working you would have to use ad b to sideload the Rom. Have you tried from bootloader fastboot erase cache?
Sent from my HTC One using Tapatalk

nathlynn22 said:
You need to reflash cwm. I'll try find a link. But after recovery is working you would have to use ad b to sideload the Rom. Have you tried from bootloader fastboot erase cache?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
My biggest issue is being able to reflash clockworkmod. If I could that out of the way, I already have the rom on the phone storage, so I should in theory be able to reflash I'd think.
I don't have the option to delete cache within the bootloader under fastboot

One Hype said:
How do I reflash recovery when I can't access the filesystem? Do I need to setup ADB and connect to my phone via command line to initiate the transfer? Can you link me to a thread that explains how to setup ADB in a case like this? Thanks
Click to expand...
Click to collapse
How did you get your One rooted, then?
You need to install ADB/Fastboot on your computer. Best to create a folder directly on C:
In that folder you also copy the .img of the recovery (you need latest TWRP for 4.4 ROMs)
Now, once ADB/Fastboot Folder is set up, the TWRP download is copied into the same folder, you go to your bootloader and connect the One via USB and select FASTBOOT (red letters) and once connected you see (USB)
You open a CMD window (START and type cmd) , in that window you point to the fastboot folder:
cd c:\fastboot (or whatever name you choose as in link above)
fastboot erase cache (enter)
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img (enter)
fastboot erase cache (enter)
you see the commands running in the cmd window
after that you can choose inside the recovery the ADVANCED option and SIDELOAD ADB
I have not done that, so you need to search the forum on how to do that.
Njoi
Screenshot to see the Fastboot folder on my laptop with the TWRP file in it
Just saw that you still have the .zip of your ROM on your internal storage. So just choose to install that and that's it! Be careful with the wiping option and only choose factory reset or cache/dalvik and never system!

hardstuffmuc said:
How did you get your One rooted, then?
You need to install ADB/Fastboot on your computer. Best to create a folder directly on C:
In that folder you also copy the .img of the recovery (you need latest TWRP for 4.4 ROMs)
Now, once ADB/Fastboot Folder is set up, the TWRP download is copied into the same folder, you go to your bootloader and connect the One via USB and select FASTBOOT (red letters) and once connected you see (USB)
You open a CMD window (START and type cmd) , in that window you point to the fastboot folder:
cd c:\fastboot (or whatever name you choose as in link above)
fastboot erase cache (enter)
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img (enter)
fastboot erase cache (enter)
you see the commands running in the cmd window
after that you can choose inside the recovery the ADVANCED option and SIDELOAD ADB
I have not done that, so you need to search the forum on how to do that.
Njoi
Screenshot to see the Fastboot folder on my laptop with the TWRP file in it
Just saw that you still have the .zip of your ROM on your internal storage. So just choose to install that and that's it! Be careful with the wiping option and only choose factory reset or cache/dalvik and never system!
Click to expand...
Click to collapse
Gotcha. Makes sense. Will try and let you know. Thanks so much!

Htc one kiktkat 4.4 update gone wrong
hardstuffmuc said:
How did you get your One rooted, then?
You need to install ADB/Fastboot on your computer. Best to create a folder directly on C:
In that folder you also copy the .img of the recovery (you need latest TWRP for 4.4 ROMs)
Now, once ADB/Fastboot Folder is set up, the TWRP download is copied into the same folder, you go to your bootloader and connect the One via USB and select FASTBOOT (red letters) and once connected you see (USB)
You open a CMD window (START and type cmd) , in that window you point to the fastboot folder:
cd c:\fastboot (or whatever name you choose as in link above)
fastboot erase cache (enter)
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img (enter)
fastboot erase cache (enter)
you see the commands running in the cmd window
after that you can choose inside the recovery the ADVANCED option and SIDELOAD ADB
I have not done that, so you need to search the forum on how to do that.
Njoi
Screenshot to see the Fastboot folder on my laptop with the TWRP file in it
Just saw that you still have the .zip of your ROM on your internal storage. So just choose to install that and that's it! Be careful with the wiping option and only choose factory reset or cache/dalvik and never system!
Click to expand...
Click to collapse
I did all what you said there its still takes me back to bootloader...
and that red message active cmdline overflow (1085bytes) still there...any soulutions to fix this please?

hardstuffmuc said:
How did you get your One rooted, then?
You need to install ADB/Fastboot on your computer. Best to create a folder directly on C:
In that folder you also copy the .img of the recovery (you need latest TWRP for 4.4 ROMs)
Now, once ADB/Fastboot Folder is set up, the TWRP download is copied into the same folder, you go to your bootloader and connect the One via USB and select FASTBOOT (red letters) and once connected you see (USB)
You open a CMD window (START and type cmd) , in that window you point to the fastboot folder:
cd c:\fastboot (or whatever name you choose as in link above)
fastboot erase cache (enter)
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img (enter)
fastboot erase cache (enter)
you see the commands running in the cmd window
after that you can choose inside the recovery the ADVANCED option and SIDELOAD ADB
I have not done that, so you need to search the forum on how to do that.
Njoi
Screenshot to see the Fastboot folder on my laptop with the TWRP file in it
Just saw that you still have the .zip of your ROM on your internal storage. So just choose to install that and that's it! Be careful with the wiping option and only choose factory reset or cache/dalvik and never system!
Click to expand...
Click to collapse
Just tried everything and it worked 100%! Can't thank you enough!

How to flash twrp recovery in Xiaomi Redmi 4a with MIUI 9? Lets see...

I have was trying to flash the TWRP recovery in my phone (Redmi 4a), but the recovery always got replaced after every reboot with the STOCK recovery.
I am now going to show how to flash this, beside the command line technique......(Although, some command line is necessary).....
1. Set adb and fastboot files in your Windows pc, fine
2. Now download the required twrp on to your pc and place it in adb-fastboot's folder.... or techies could path to that ****....
3. Enter bootloader with.....
adb reboot bootloader​4. Now boot to twrp using......
fastboot boot recovery.img​(I have named that twrp file as recovery)
5. Download super su zip, move it in phone, root your device....... reboot your device.......Now the second phase of process comes
6. Install twrp app in your phone, open it, copy the twrp image file to phone, tap on flash recovery
7. Select your twrp recovery in the phone and boom....... you have done it...... reboot to recovery by adb reboot recovery
I FORGOT TO MENTION, you should have your device unlocked, and I AM NOT RESPONSIBLE FOR ANY MISHAP and FOR THE STATE TO PLAY CRICKET WITH YOUR PHONE...... I am honest ....... IT WORKED FOR ME......

any tester n confirmed worked ?

No reason to do all those, you can flash recovery directly from fastboot with one command. The command:
Code:
fastboot boot recovery.img
just boot to that recovery one time. This is good for testing a recovery or use it for one time without install it.
If you want to flash a recovery you just need to use:
Code:
fastboot flash recovery recovery.img
Also for both commands isn't necessary to rename the recovery file or to put it adb folder, or root the device. Just need to specify the path and filename in place of "recovery.img". For e.g:
Code:
fastboot flash recovery C:\Phone\Recoveries\twrp_3.2.1.img

Can't boot into TWRP

Hi,
I've installed the Global Stable 10.0.2.0 via Mi Flash Tool on my Mi 8 and wanted to install TWRP the usual way, but it won't boot into TWRP.
Steps so far:
Code:
adb reboot bootloader
fastboot flash recovery twrp.img
--> all fine, it says writing ok
Code:
fastboot boot twrp.img
---> TWRP star screen but nothing else happens
or
Code:
fastboot reboot recovery
---> normal boot
or
Code:
adb reboot recovery
---> error occurs
I'm using a Windows 10 PC. Maybe you can help and tell where the mistake is.
Thanks

How To Guide [TUTORIAL] ULTIMATE How to flash GSI Trebble AND ROM and root on Xiaomi device on Windows (files needed included)

Hi, first of all, I'm not a dev or else just user who had difficulties to flash GSI on my phone... Was 7 years with a samsung galaxy Note 3, with twrp....So easy to flash....
with the help of @gr0ndpa, thanks to him.....
FLASH GSI​
Now I will explain how to flash easily with files attached
1/ first of all you need a phone and drivers installed, use xiaomi pc suite, unzip and install it
2/ you need to activate USB debug in dev options.
3/ dl platform tools folder unzip it and put in C
4/ run command and type
Code:
cd /adb
5/ then
Code:
adb devices
to check if phone recognised
6/
Code:
adb reboot bootloader
once in fast boot
7/
Code:
fastboot flash vbmeta vbmeta.img
wait finished type to enter in fastbootD
8/
Code:
fastboot reboot fastboot
9/
Code:
fastboot flash system
LiR 313.XXX.img
you will have a system error, but wait the flash begin in few seconds
at the end wait ok then
10/
Code:
fastboot reboot recovery
on stock recover
11/ wipe data and reboot with +/- and PWR
and you're done...
In case you want to flash custom kernel or patched boot image to root with magisk, you have to
12/
Code:
adb reboot bootloader
Copy kernel boot image to C drive and rename kernel boot image to boot.img.
13/
Code:
fastboot flash boot c:\boot.img
14/
Code:
fastboot reboot
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
You can check what I ve done on tuto ss...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++==================================================================================================================================================================================================================++
Flash ROM​
This now how to flash ROM on your device, it's convenient for all roms like LOS, corvus, awaken...
First you need all the proper drivers installed and unlocked bootloader, USB debugging all of that stuff.
Now open up a cmd/terminal , and put the files i sent and the ROM file in the folder from where you're opening the cmd/terminal and connect the phone (you may need to put ./ as an suffix for all the commands if you're on linux)
Type
Code:
adb reboot bootloader
Then type
Code:
fastboot devices
to see if everything is ok
Then type
Code:
fastboot flash boot_ab boot.img
(you can drag and drop the file instead of typing it)
After that's done type
Code:
fastboot flash vendor_boot_ab vendor_boot.img
(you can drag and drop this too if you want)
Code:
fastboot flash dtbo dtbo.img
(you can drag and drop this too if you want)
After that's done type
Code:
fastboot reboot recovery
This will boot you into a recovery and now you need to go to wipe and format data
After that go to apply update then adb sideload then
In the cmd type
Code:
adb sideload rom.zip
for example (you put the ROM zip here you can drag and drop it)
Wait for that to finish it will go to 47% and on the phone it will show step 1/2 then step 2/2
and when it's done it's gonna show an error
adb: failed to read command: No error
Then you can reboot to system

One more

Two more

This the tuto I follow to flash renoir, who have same characteristic than all Note 12 series... Tuesday I can confirm it works

I'm having a problem that my phone can't go to fastboot via CMD after I flash vbmeta.
Is is me doing wrong or also happen to you?