Database Develop

[DEV] ALL in ONE for Galaxy Note N7000 (BLN,CRT-ON/OFF, PowerMenu,and more)update

Hi world
here it is for N7000
All the development to make your note more usable
I made also a varity of choices for u
flash Homam's files via RECOVERY and enjoy
u must be on deodexed ROM and always make nandroid backup befor using any file
I am not responsible of any damage that caused by any of my files
---------------------------------------------------------
*Extended Power Menu
- Deodexed KKA ROM**
http://www.multiupload.com/VYU3UXRHP4
-Deodexed KKA ROM with SMS-BLN support, CRT-ON/OFF, %battery and ICS menu animation**
http://www.multiupload.com/CQA6VKA8MV
-Deodexed KL3 ROM with SMS-BLN support, CRT-ON/OFF**
http://www.multiupload.com/RX9JSCMNC8
***********************************************************
*Remove SMS from CallLog (social hub fixed)
- Deodexed KKA ROM**
http://www.multiupload.com/N4IKCQJLXE
***********************************************************
bLED MODE: (for all ROMs till KL3)
http://forum.xda-developers.com/attachment.php?attachmentid=815064&stc=1&d=1323785313
***********************************************************
Phone.apk noise suppression disabled by default & no ascending ringtone
KL3
http://forum.xda-developers.com/attachment.php?attachmentid=822212&d=1324314013
***********************************************************
This is how to delete Yellow Triangle from the boot image which appears due to flashing custom Kernel via ODIN
follow the steps below:
*download this APK into your device and install it as any application
http://www.multiupload.com/BL9BNEXB7K
*Start the app and choose "Dump current kernel to SDcard
*Reboot into DOWNLOAD mode
*Download the stock kernel which match your ROM only
-KL3
http://www.multiupload.com/LXIXMBHIWT
*Flash the stock kernel via ODIN
*After rebooting go back to the same application that we used it to dump the kernel
*Choose "Flash kernel from SDcard"
*Reboot
*You are done
***********************************************************
I am glad for any donation u make which will support me to provide more
and nothing bad will happen if u press THANKS BUTTON before DOWNLOAD link
credit as always to me
***********************************************************
Thanks Menu
@Brightidea (my teacher)
@Heliccant (Ktool)
@watch_mania (bLED mode)
@MoWeb (Phone noise suppression disable & no ascending ringtone)
***********************************************************
Homam,,

reserved for future dev

first...... Thanks a lot...

How do you know if you have a deodexed rom? I'm on stock kka with cfroot and cwm
Sorry for being a noob lol

Really Big News for note users.
Tried the power menu mod
Works great....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7000 using Tapatalk

nuclearmonkeyuk said:
How do you know if you have a deodexed rom? I'm on stock kka with cfroot and cwm
Sorry for being a noob lol
Click to expand...
Click to collapse
Stock rom isn't deodexed.
Sent from my GT-N7000 using xda premium

drgopoos said:
Really Big News for note users.
Tried the power menu mod
Works great.... View attachment 819363
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Much better if the icons are modified as well to corresponds default icons...

Any chance of getting the crt on/off animation but without the battery mod? I hate that thing.

Thank u mister.Very usefull!
Can u please make these modes compatible with the latest official filmaware XXKL3?

thanks for the lovely mod. works flawlessly

drgopoos said:
Really Big News for note users.
Tried the power menu mod
Works great.... View attachment 819363
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
i confirm..
it works great..btw i have KK9

Ok so i'm on Rocket ROM v8 based on KKA and when ever i try and flash in recovery i get a syslink error
Any ideas?
Edit: Forget that phone has rebooted with everything working lol.. confused

Nice Thread !
But could you Add the bLED Notification MOD ?
We could make this whole thread a collection of the greatest mods but bLED is missing, i think it it awesome
Maybe also those Thunderbolt-Tuneups

Do we have some for the new KL3?

i need KL3 dump files ,,, someone upload it plz

Homam Ageel said:
i need KL3 dump files ,,, someone upload it plz
Click to expand...
Click to collapse
which files you need?
the dump is very big and takes a long time for the up
alternatively you can download this:
http://forum.xda-developers.com/showthread.php?t=1393979
is like the stock but deodexed

alesscam said:
which files you need?
the dump is very big and takes a long time for the up
alternatively you can download this:
http://forum.xda-developers.com/showthread.php?t=1393979
is like the stock but deodexed
Click to expand...
Click to collapse
that is much better
i will make the modification on the new files and upload soon

Thanks Man...

Seeing as you have not provided any documentation as to what initiates you took to enable CRT on here, I read your SGS 2 threat and presume its in the services.jar.
I have a modded rom already on deoxed KK1 and have no desire to install a totally new framework.
So should it be ok to just replace the services.jar on my system to enable crt-on animation?

cybermessiah said:
Seeing as you have not provided any documentation as to what initiates you took to enable CRT on here, I read your SGS 2 threat and presume its in the services.jar.
I have a modded rom already on deoxed KK1 and have no desire to install a totally new framework.
So should it be ok to just replace the services.jar on my system to enable crt-on animation?
Click to expand...
Click to collapse
It should work..
make nandroid backup just un case

[ROM][ARC/S][3/24] Advance Stock ROM v1.0 | Stock Only 2 Star! | -= [4.0.2.A.0.69] =-

-=Advance Stock ROM v.1.0=-​
This Version Is Stock -= [4.0.2.A.0.69] =- And Its Fast As Light... For Unlock And Lock Bootloaders. Enjoy Your Fast Arc..
Supported Kernels:
DooMKernel v20 = Supported [ Runs More Smoother Zram ]
DooMKernel v18 = Supported
DooMKernel vXX = Supported
StockPlus 1.X - 1.9 = Not Tested
Download Links :
Version 1.0:
Advance Stock ROM v.1.0
Add-Ons:
Creating It..
ChangeLog:
Version 1.0
Pre-Rooted
Added SEMC Tweak
init.d Tweal
Balance Tweak
Lag Killer
HTK Tweak
Updated Market
Pre-Super Charge [ Experimental ]
Kernel Tweak { Experimental }
Auto Root Fix [ Init.d ]
Lag Nullifier
Stock ROM
ScreenShot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Reserved.............

Reserved Again.. ...

Actually, my ROM already done this kind of job. This is kinda redundant, you should focus more on your existing ROMs in my opinion. No offense.

doomed151 said:
Actually, my ROM already done this kind of job. This is kinda redundant, you should focus more on your existing ROMs in my opinion. No offense.
Click to expand...
Click to collapse
Yeah... I Know DuDe... But I Have 3 Member Helping Me To Manage ThosE Other ROM... I Had A hard Time On The Script-Update..

how can i flash this ROM with a looked bootloader

ChaosFirZen said:
Yeah... I Know DuDe... But I Have 3 Member Helping Me To Manage ThosE Other ROM... I Had A hard Time On The Script-Update..
Click to expand...
Click to collapse
I don't think stealing an edify script is hard.

Hahaha... I Dont Steal Script.. =)))...

slimmer2 said:
how can i flash this ROM with a looked bootloader
Click to expand...
Click to collapse
Try.. Cuase Im Unlocked Maybe YES Try.. ...

I Just Followed The Steps On The Kitchen ROM.. And U Teach Me How To Script The SuperUser Remeber @Doomed151.. I Never Steal Script..

Hi Master, i tell u one think why you create this Rom dnt be waste time already this Rom in the form try to focus ur Xperia S Rom or something Script like, sorry for that just tell u my opinion (after all ur wish)

Kkkk... ... Im Updating This ROM every 3 Week.. The Xperia S Rom is Every 1 Week.. And Its A Deal..

did u have yet Xperia s Master or maybe thinking to buy this one

Im Thing To Buy Xperia S To Develop ROM To.. BTW>.. My Xperia S AOSP ROM Is Allmost Finish I Have NEw Defaultheme.apk at MooDeD~Gb Please See.. Afzi.. ..

right now i am using cm9 working great but mass-storage not working they all rom in pc i was downloading 30.0 rom but still its in the system, i tell u in night, right now i dnt have card reader how sent to file in the card but i try An tell u (can u tell me why u make Rom to big size, comprise the file size)

ChaosFirZen said:
I Just Followed The Steps On The Kitchen ROM.. And U Teach Me How To Script The SuperUser Remeber @Doomed151.. I Never Steal Script..
Click to expand...
Click to collapse
ChaosFirZen said:
Hahaha... I Dont Steal Script.. =)))...
Click to expand...
Click to collapse
Line 22, 23, 26 and 27. Are you sure those aren't coincidence?
As far as I can remember, the kitchen doesn't generate scripts like that. Heck, I even used a stopwatch to measure how long it took to copy the files to time the progress bar properly.
I'm not mad or angry, but at least you should've asked for permission.

I Didn't Steal It,,, Heck.. Its Found On... SE-Tweaked Kinda.. BTW.. You.. Can.. MAke To On The Kitchen.. =)..

And I Dind't Know That Its YOur Script.. -.-"
And BTW ... The Script Is In SE-Tweaked Here.. Is The Proof I Dont Know That is is yours...
http://www.mediafire.com/?ulxlh49ta96le2x

we know ur the senior member doomed151 in this filed just to co-prate Doomed why u angry or angrybirds Master Doomed con-down (r u scary to him) he maintain 4 Rom good job but all ready i told him this one already in form

[email protected] Sorry... =((((((((((( I Dindt Know Thats Your Script...

[DEV][DASH-M]Latest..Speed Up Ur Phone ..Die Hard Batterry..AmaZing Preformance

Hello People
At Begining I have to say That
"Dash-Mod has a great part Which Based on FREEX by zeeplinrox Really thanks zeep for Your free x That says "Used Ram Isnt bad and might be better Than Unused ' i confirm'
And ..
Iam glad to present you dash mod rc2 fixing bugs with 4.4.x Introducing:
-Dash-M-RC2: The main file which had a great part to kill lag,and gives u smooth , better preformance ,a Die Hard Battery (Stayed With my Tassve for 6 Hours of hard working With 3G On ,used bluetooth,played games and more(it deserves a try)),improves sd speed ,screen sinsevity ..scorling , img quality ,network preformance and more....
-DM_BuildPropTweeks:adds a set of build.prop usefull tweeks that Reduces boot time alot and have a part in scorling preformance, img quality and more + Ihave added a feauture to that tool which Backs up ur current build.prop file in folder called "Dash" in your sd root so if you got proplems after flashing build.prop tweeks
U can replace it with the Backed up build.prop via aroma file manager/adb/zip..etc.
-DM_CacheTweek: Improves cache preformance and helpfull for those who have proplems in cache as it Joins Dalvik.Cache into Cache(if cache is enough to hold it).
-DM_undocache: From its name it undo what CacheTweek has done For Who Had Proplems after apllying it like FCs..
-Uninstaler_RC2: Removes Every Thing Done By Dash-M-RC2
Lets Talk More About "Dash-M-RC2:
That Incudes :-
-Android Treminal ( will be used latter in instructions)
-Dash Binaris
+Init.d Tweeks Including
-12Dash_zipaligndata: Zipalligns data every 24 hrs -11Dash_zipalign:zipallign system every 24 hrs
-10Dash_touchscreen:improves touch sensevity
-09Dash_sqlite_optimize: _optimizes Apps Databases
-08Dash_sd: Configures sd speed and sets read ahed to 2048
-07Dash_netwroktweeks: Some improvements to networks
-06Dash_mainfree: Configures your device for Hardest multitasking
-05Dash_cleaner:Cleanes Unnessecary ..tmp..thumb etc(safe wont touch sd)
-04Dash_cache: Included In DM_CacheTweeks That is meant to Move DalvikCache into Cache
-03Dash_boot:_Does some cleanes and improvements during boot -02Dash_batteryceleb:Celebrates battery -01Dash_battery : Die Hard Battery Mod
-Syctel.tweeks: A Part Of DieHard Battery And Nwtwork Improvements
Click to expand...
Click to collapse
+Entropy Bins:
To Activate rngd/entropy go to triminal and write
Code:
su
Dash
Dissactivate
Code:
su
Undash
Check if Dash Is Running Correctly
Code:
su
Dash-M
Click to expand...
Click to collapse
Note For KK 4.4.x users it depends on luck For Cache and build.prop tweeks works on some phones but not on others .
Instructions
-Flash Dash-M-RC2 (Must)
-Flash DM_BuildPropTweeks (Optinal)
-Flash DM_CacheTweek (Optinal)
Terms Of Sharing
Wanna share??
-U can share it but dont give download links Just Link to That Thread And They Come To Download it from here
Wanna Include In Your Rom?
-u can ,but give me a credit and Link to That Thread
DownloaDS-Official Thread

Screen shots of Hard Tasking and harder Task manager(stock) on a low specification Phone i wont be Lier if i told it never laged
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Not working. Phone is stuck at bootlogo. No other scripts were installed. Installed it on the rom KitKatUI v2.0 by SlimShaddy

Put original build.prop in its place

myaservip said:
Put original build.prop in its place
Click to expand...
Click to collapse
which place, you mean inside the Dash-M_RC2.zip?

Nup
Folder in sd
Called
Dash

myaservip said:
Nup
Folder in sd
Called
Dash
Click to expand...
Click to collapse
I have put the original build.prop in system folder to Dash folder in sd card, then flashed Dash-M_RC2.zip but no success. there are no other scripts in int.d folder which would conflict with it. I removed them. I tried flashing it on stock rom before and it booted successfully. But when about trying on this rom i got this problem.

Dont clear init.d
Dash cleares its way

myaservip said:
Dont clear init.d
Dash cleares its way
Click to expand...
Click to collapse
Tried the same way before and same problem.

Logcat!!

having same problem.... phone stuck at bootsplash(not even bootanimation).... tried helium as well as diamond edition...

Dont try on 4.4.3+

myaservip said:
Dont try on 4.4.3+
Click to expand...
Click to collapse
i tried on ics as well as gb rom.... no luck..
what could be the problem?

bharath_58 said:
i tried on ics as well as gb rom.... no luck..
what could be the problem?
Click to expand...
Click to collapse
logcat

How can i provide a logcat?
Its not booting...
Sent from my GT-S5570 using Tapatalk 2

When u hear usb connect sound "on pc" your phone is ready for Adb

myaservip said:
When u hear usb connect sound "on pc" your phone is ready for Adb
Click to expand...
Click to collapse
I dont know how to use adb... sorry...
Sent from my GT-S5570 using Tapatalk 2

[Guide / LP 5.1.1] Decompile and recompile your apk (Windows) (Update 10/09)

1) Use Advanced ApkTool v4.1.0 and install it on your computer,
2) Download apktool v2.0.1 and rename it apktool.jar,
2) Replace the old apktool.jar by the new one in 1-BDfreak,
3) Launch Advanced ApkTool, install the framework, decompile your apk, do your modifications, recompile with sign and zipalign,
4) Open your new apk (with winrar for instance) and replace the META-INF folder and androidmanifest.xml by the ones of your old apk.
That's all

thanks..can you tell me what zipalign means and does? because previously i was just doing recompile and sign and i wasnt getting any problems

arismelachrinos said:
thanks..can you tell me what zipalign means and does? because previously i was just doing recompile and sign and i wasnt getting any problems
Click to expand...
Click to collapse
Just google it
zipalign is an archive alignment tool that provides important optimization to Android application (.apk) files. The purpose is to ensure that all uncompressed data starts with a particular alignment relative to the start of the file. Specifically, it causes all uncompressed data within the .apk, such as images or raw files, to be aligned on 4-byte boundaries. This allows all portions to be accessed directly with mmap() even if they contain binary data with alignment restrictions. The benefit is a reduction in the amount of RAM consumed when running the application.

Nice guide bro. Btwn signing and zip align is not necessary..

Brothers
Tray AWESOME tool @Ticklefish
Tickle My Android 10.2 - The Best Android Theming Tool...EVER!! by
Its sign app without any problems
I have used this method, but soon as you copy from the original application AndroidManifest.xml that some values do not work. This also limits the modification miozliwosci app
Better use apktool v2.0.0 SnapShot
@Ticklefish again thanks YOU ARE AWESOME

Ambor said:
Brothers
Tray AWESOME tool @Ticklefish
Tickle My Android 10.2 - The Best Android Theming Tool...EVER!! by
Click to expand...
Click to collapse
Thanks bro, I'll try it !!

Yes @Ambor bro.. Just now tried @Ticklefish 's tool with Lolipop.. Its awsom... Loving it..

Everything OK but can't decompile my themes with any of this softwares. I installed framework from my z2's new 5.1.1 still can't decompile. Any solution

Toxizen said:
Everything OK but can't decompile my themes with any of this softwares. I installed framework from my z2's new 5.1.1 still can't decompile. Any solution
Click to expand...
Click to collapse
Are you getting any errors?
Sent from my D5803 using Tapatalk

Ticklefish said:
Are you getting any errors?
Sent from my D5803 using Tapatalk
Click to expand...
Click to collapse
Yes and I also get error while signing too. error 26 or something

Toxizen said:
Yes and I also get error while signing too. error 26 or something
Click to expand...
Click to collapse
If you can share those errors, it'll help solve what the problem is.

Error
Ticklefish said:
If you can share those errors, it'll help solve what the problem is.
Click to expand...
Click to collapse
Sorry for my late reply . I wasn't at home .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Toxizen said:
Sorry for my late reply . I wasn't at home .
Click to expand...
Click to collapse
Did you install SemcGenericUxpRes.apk?

Ticklefish said:
Did you install SemcGenericUxpRes.apk?
Click to expand...
Click to collapse
Yes I did everything. But same problem with my themes. But it managed to decompile my Systemui.apk. So I am thinking it might be the problem with my apk file only so I provide it here. Test and let me know why this is happening please.
But nice tool u made.
https://drive.google.com/file/d/0B4TWfrb9-m18anlOT1UtdmlzamM/view?usp=docslist_api

Toxizen said:
Yes I did everything. But same problem with my themes. But it managed to decompile my Systemui.apk. So I am thinking it might be the problem with my apk file only so I provide it here. Test and let me know why this is happening please.
But nice tool u made.
https://drive.google.com/file/d/0B4TWfrb9-m18anlOT1UtdmlzamM/view?usp=docslist_api
Click to expand...
Click to collapse
Oh, you used TMA! I didn't spot it...
I'm having the same problem decompiling your file. Looks like there's a resource that can't be decoded. Sorry about that.

Update 10/09
OP updated for 5.1.1.

nreuge said:
OP updated for 5.1.1.
Click to expand...
Click to collapse
Well i have found TMA is better and amazing.. There is no need to replace anything in apks after recompile. Just recompile apk with same sign option in TMA. Lot of awsom options available in TMA. You should try that mate.. A big thanks to @Ticklefish ma broooooo

Rajeev said:
Well i have found TMA is better and amazing.. There is no need to replace anything in apks after recompile. Just recompile apk with same sign option in TMA. Lot of awsom options available in TMA. You should try that mate.. A big thanks to @Ticklefish ma broooooo
Click to expand...
Click to collapse
Ok my friend, good to know that. I'll try
Thanks !!

[GUIDE] Xposed Framework On Samsung Lollipop ROMs

Orginal guide from SamsungViet.vn
You will need the following:
Edit core-libart.jar
Edit services.jar
Donwload XposedInstaller_3.0-alpha2.apk, xposed-sdk21-arm.zip at here, and dont forget thank to @rovo89
Click to expand...
Click to collapse
Step 1: Decomplie core-libart.jar. Extract core-libart.jar.zip (attachment) and copy all files to core-libart.jar.out/smali/. Recomplie core-libart.jar.
Step 2: Decomplie services.jar. Search all files in services.jar.out/smali contain this string:
Code:
Ljava/lang/String;->clear()V
And remove all lines contain string above. Recomplie services.jar.
Step 3: Install/Copy XposedInstaller_3.0-alpha2.apk into /system/priv-app/XposedInstaller/ (Create if not exists)
Step 4: Reboot to recovery, flash all modified files and xposed-sdk21-arm.zip.
Step 5: Reboot and enjoy
BOOTLOOP OR FAIL?? NOTHING TO SAY UNLESS YOU HAVE THIS INFORMATION
Your device name
Your rom BASE
Full Logcat
Tested on DarkLord S6 Port and DarkLord N4 Port for Galaxy Note 3.
Buy me a cup of tea
​

1. Cant install apps?
Try move XposedInstaller.apk to /system/priv-app/ like this http://forum.xda-developers.com/showpost.php?p=60852580&postcount=59

Nice Bro I will try it later today. I gonna test it on SimplRom v3.2 on Note 4

Thanks, could you attach already modified file?

I'd be interested to know if this results in module compatibility identical to what non-stock roms currently have.

Great work. Thanks man
A few questions:
- Is a deodexed rom necessary?
- Do I have to set SELinux to Permissive, like on non-touchwiz roms?
- What else do I have to pay attention for?
Will test after I know the requirements.

And you just lost 99.9999% of the users interested. Extracting and recompiling jars? Even if it does work, you'd better expect thousands of how-do-I comments...

GerasVille said:
Great work. Thanks man
A few questions:
- Is a deodexed rom necessary?
- Do I have to set SELinux to Permissive, like on non-touchwiz roms?
- What else do I have to pay attention for?
Will test after I know the requirements.
Click to expand...
Click to collapse
U must deodex rom
Beefheart said:
I'd be interested to know if this results in module compatibility identical to what non-stock roms currently have.
Click to expand...
Click to collapse
Sent from my SM-G9250

I'm doing a backup, then test right now

Great work @darkera13

Here you can find a tutorial how to recompile a .jar file.

So I can install it on a S5 with Roma Phoenix? Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ldeveraux said:
And you just lost 99.9999% of the users interested. Extracting and recompiling jars? Even if it does work, you'd better expect thousands of how-do-I comments...
Click to expand...
Click to collapse
This guide is for rom maker/coocker. So stay tune.

HungryDazeDP said:
Thanks for your work!
Can smb please make a more detailed guide?
Click to expand...
Click to collapse
+1
yes please

Unfortunately, I got boot loop on Deodexed BOD3 SM-G900F.
What I removed are these every red lines - whole line contains "Ljava/lang/String;->clear()V":
Code:
[COLOR="SeaGreen"].line 6983[/COLOR]
[COLOR="Red"]invoke-virtual {v2}, Ljava/lang/String;->clear()V[/COLOR]

@nambavuong, Sorry for my ignorance but as I perform this procedure. I have no knowledge base.
I need a tool to manipulate the files to be modified and after install it from recovery?
or
you only have to install DarkLordS6.Xposed.Fix.zip and xposed-sdk21-arm.zip and restart?

faoineag said:
So I can install it on a S5 with Roma Phoenix? ThanksView attachment 3322345
Click to expand...
Click to collapse
Yes.
Read all OP
you will need
- Auto Deodex tool
- Advanced ApkTool http://forum.xda-developers.com/showthread.php?t=2639400
- WinGrep
And following guide

HungryDazeDP said:
Thanks for your work!
Can smb please make a more detailed guide?
Click to expand...
Click to collapse
+1 too

Sorry all, please redownload attachment, has a mistake at the first uploaded.

ghoster76 said:
Unfortunately, I got boot loop on Deodexed BOD3 SM-G900F.
What I removed are these every red lines - whole line contains "Ljava/lang/String;->clear()V":
Code:
[COLOR="SeaGreen"].line 6983[/COLOR]
[COLOR="Red"]invoke-virtual {v2}, Ljava/lang/String;->clear()V[/COLOR]
Click to expand...
Click to collapse
Yup, remove all. And please redownload attachment (fix bug).