Database Develop

Help me please...galaxy tab Exclamation mark

i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....

water30 said:
i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....
Click to expand...
Click to collapse
what did you do to get to this screen? Is this after or before you upgraded firmware?

GANJDROID said:
what did you do to get to this screen? Is this after or before you upgraded firmware?
Click to expand...
Click to collapse
after upgrade firmware odin show reset but the my tab not reset then i just manual reset (i can take this method for my galaxys ) after that.....

Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again

i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?

primeroz said:
i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?
Click to expand...
Click to collapse
Read my above post. Go into download mode (volume down + home + power) you'll still have the same image but the phone WILL be in download mode. Then flash your previous firmware and you're sorted.
Sent from my GT-P1000

You probably got that by messing with the kernel. Fund the zImage from the firmware, extract it with a .tar extractor then use something like heimdall to flash the kernel and it should work.
Sent from my GT-P1000 using Tapatalk

Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.

Help please
slaia said:
Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.
Click to expand...
Click to collapse
Having the same problem too... anyone can help?

If you see Phone-!-Pc on the Tab screen it is the download mode.
You can reflash it using Odin, however, you will need to do full Rom flash. I had similar problem and solved it by replashing.
I followed the latest guide published in this forum and Roto-JME rom with reformatting of internal sd.

Phone ! PC error FML!!!
GANJDROID said:
Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again
Click to expand...
Click to collapse
Where can i download the JM6 zip??

Hey guys,
I tried to manually update my tab to Gingerbread today via Odin, but it kept hanging on select partition (I discovered I used the wrong PIT for the firmware I was going to flash, but as I didn't select the firmware yet that shouldn't be a problem). At last I decided to quit Odin (which might have been stupid...) and try it again. Then it kept haning even earlier, so I tried to restart the device in download mode. However, whatever I try it keeps giving the Phone ! PC sign. If I try to just boot, if I try to go into recovery mode or if I try to go into download mode. I saw a lot of possible ways to solve the problem, but my PC doesn't recognize the tab anymore. If I connect it, it does give the "usb device connected" sound, but there is a popup which sais "USB Device not recognized. One of the USB Devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message". I already tried to reinstall the driver but it doesn't work. Also Odin and Heimdall don't detect any device.
Does anyone know a solution for this problem? Maybe taking the battery out? (for which I have to buy a new triangle screwdriver, so I need to know if it could possibly work first. It takes some weeks to order such a thing I think...)
EDIT: I played around a bit with the drivers again, and suddenly both Heimdall and Odin recognized it. However Odin stopped recognizing it again. Then I pressed "read PIT" in Heimdall, which worked. After that the device started booting up to the Samsung logo animation and then powered off again. Now it doesn't do anything anymore, not even showing the Phone ! PC screen. I'll charge it overnight (maybe it's gone empty during the process), so I hope that helps.....

In some strange way, the phone works again..... So never mind my post above.

[Q] Samsung Galaxy Ace S5830D - Semi-bricked - Need Help!

Hey All,
So I'm in the process of helping a friend with his Galaxy Ace from Koodo. As it turns out the phone looks like it's semi-bricked but we may be mistaken all together so here goes:
My buddy tried using SuperOneClick to root his device however half way through the process, it froze and when he restarted his device, it hangs at the Samsung logo during the startup boot sequence.
1. When using a combination of UP Arrow + Home button + Power, he receives a message stating:
"RAMDUMP Mode
(ARM9 mode)"
In this mode he cannot do very much however his PC does recognize the device. Odin does not work in this mode.
2. When using a combination of DOWN arrow + Home button + Power, he received 2 different screens. The first is a bright pink colored screen that states:
"Warning!
A custom OS can cause critical problem in phone and installed applications. If you want to download a custom OS, press Volume UP key. Otherwise, press Volume DOWN key to cancel."
Pressing the down arrow brings him back to the frozen Samsung logo on startup however when pressing the UP arrow, the phone goes into "Downloading..." mode. In this mode, Odin DOES work.
-----------------------------------------------------------------------------
Now for the troubleshooting we've done. We managed to find a few articles online that asked us to use the Odin tool. We downloaded a few different sets of the files needs (Cooper.ops, CODE, MODEM, CSC & BOOT). Odin then detects the phone in 'Downloading..." mode and proceeds to installing the rom. It completes successfully however it does not reboot. The screen simply flashes with the Samsung logo again.
The original firmware build before the device stopped working ended with TLKI4.
-----------------------------------------------------------------------------
1. Can anyone suggest anything else we can try?
2. Do you know if the bootloader needs to be flashed first and if so, how?
Note: We can not take the device back to Koodo as it was purchased on Kijiji and no receipt was provided. It's the GT-S5830D.
Thanks in advance,

1- boot into recovery and try to wipe data and cache. u can enter recovery mode by pressing home+power.
2- it doesnt matter, u already flashed new bootloader by flashing the phone via odin.
btw does the "D" in "GT-S5830D" bring any different in hardware with international regular GT-S5830 that most of us here use?
if its different by somehow, u shouldnt flash generic international GT-S5830 rom into it. i know for sure that galaxy ace korean version cannot use generic rom from international galaxy ace.

yep there are some 5830D specific roms on sammobile.. try them instead of generic ace

madman_amit said:
yep there are some 5830D specific roms on sammobile.. try them instead of generic ace
Click to expand...
Click to collapse
Can you point me to a certain rom/boot loader to download from sammobile? I was there earlier this morning however I didn't see any mention of Canada anywhere and I left before I messed things up further.
Even if you could just tell me which one it is I have to download, I'll do the rest myself.
Thanks a bunch!

an0nym0us_ said:
1- boot into recovery and try to wipe data and cache. u can enter recovery mode by pressing home+power.
2- it doesnt matter, u already flashed new bootloader by flashing the phone via odin.
btw does the "D" in "GT-S5830D" bring any different in hardware with international regular GT-S5830 that most of us here use?
if its different by somehow, u shouldnt flash generic international GT-S5830 rom into it. i know for sure that galaxy ace korean version cannot use generic rom from international galaxy ace.
Click to expand...
Click to collapse
There is no option to wipe the device. In fact, I have had other Galaxy S models and I'm pretty familiar with the screen however the Ace does not load into that recovery. Either it goes to "Downloading.." or "RAMDUMP (Arm9 mode)".
Thanks

well seems like sammobile haven't got for 5830L
but not to worry alternative site has one specifically rare rom of "D"
download it from this link
http://hotfile.com/dl/137128537/a629597/GT-S5830D_TLS_S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4.rar.html
which you originally were using.. no other things for D
password : sampro.pl
Happy Flashing
---------- Post added at 12:10 AM ---------- Previous post was at 12:09 AM ----------
merrybob said:
There is no option to wipe the device. In fact, I have had other Galaxy S models and I'm pretty familiar with the screen however the Ace does not load into that recovery. Either it goes to "Downloading.." or "RAMDUMP (Arm9 mode)".
Thanks
Click to expand...
Click to collapse
he was talking about recovery menu which can be accessed pressing down home button while booting.. if device is in bootloop then try to wipe data from recovery first as that might help

madman_amit said:
well seems like sammobile haven't got for 5830L
but not to worry alternative site has one specifically rare rom of "D"
download it from this link
http://hotfile.com/dl/137128537/a629597/GT-S5830D_TLS_S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4.rar.html
which you originally were using.. no other things for D
password : sampro.pl
Happy Flashing
---------- Post added at 12:10 AM ---------- Previous post was at 12:09 AM ----------
he was talking about recovery menu which can be accessed pressing down home button while booting.. if device is in bootloop then try to wipe data from recovery first as that might help
Click to expand...
Click to collapse
Thanks buddy! I tried that exact ROM however it didn't seem to work either. I used the 'Coopers_V1.0.ops" file under the "OPS" option in Odin and the "S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4_HOME.tar.md5" file under the "One Package" option. Like I said before, the flash went through in "Downloading..." mode, and Odin said "PASS" however, when it came time for the phone to reboot itself, the screen started flashing and did nothing new. Same Samsung logo appears and it seems to hang right there.
Also I dont think the device has a same recovery menu anymore because even though I hold down the Home + Power buttons, it does nothing. It simply flases the screen at the Samsung logo screen.
Any other tips for me to try? Thanks again!

wierd that u cannot enter recovery mode while u can enter download mode and successfully flash it using odin.
even if u messed up recovery when u first use superoneclick earlier, flashing via odin should also flash it with new fresh recovery. so how long did u hold the home+power? i'm asking just to be sure. maybe u not hold it long enough for recovery mode to kick in.

an0nym0us_ said:
wierd that u cannot enter recovery mode while u can enter download mode and successfully flash it using odin.
even if u messed up recovery when u first use superoneclick earlier, flashing via odin should also flash it with new fresh recovery. so how long did u hold the home+power? i'm asking just to be sure. maybe u not hold it long enough for recovery mode to kick in.
Click to expand...
Click to collapse
I held it down for more than a minute just to make sure. As soon as I put the battery back in and try and restart the phone, it goes into an infinite loop at the Samsung screen.
Even I find it odd that the phone will go into Downloading mode but not recovery.
Any other suggestions?

try to install qtadb (google for it). connect the phone with pc via usb, launch qtadb and boot the phone. qtadb should display some logcat. paste the logcat output here. maybe we might have a clue whats wrong by looking into the logcat
but even if phone still stuck, just wait a few moment. if qtadb had access to the phone system via its native filemanger, it means u can use adb. use adb to reboot phone into recovery

an0nym0us_ said:
try to install qtadb (google for it). connect the phone with pc via usb, launch qtadb and boot the phone. qtadb should display some logcat. paste the logcat output here. maybe we might have a clue whats wrong by looking into the logcat
but even if phone still stuck, just wait a few moment. if qtadb had access to the phone system via its native filemanger, it means u can use adb. use adb to reboot phone into recovery
Click to expand...
Click to collapse
As far as I can tell QtADB isn't even detecting the phone. I have tried to complete the procedure over and over however no show. I may not have installed ADB correctly though so I'll give it a shot again a little later.
Thanks!

edited due to same soloution already posted.

tengo uno en las misma ay solucion

[Q] Stuck at Samsung logo after trying to upgrade my note to N7000XXLPY

Hello,
I wanted to update my Note to official german ICS (N7000XXLPY) using Odin. After going through th whole process:
extracting, wiping, putting in download mode, chosing N7000XXLPY in PDA and starting, it took some 5 to 8 minutes until odin finished with
"REMOVED!" and the phone restarted with new ICS boot animation.
Now it's stucked on SAMSUNG logo. I've tried to reboot a few times but nothing changes. ANy help would be apreciated.
Thanks,
BruXav
Sorry for posting my q on wrong place!!
ps: the rookie I am forgot to enable debug mode before going through this :-(

BruXav said:
Hello,
I wanted to update my Note to official german ICS (N7000XXLPY) using Odin. After going through th whole process:
extracting, wiping, putting in download mode, chosing N7000XXLPY in PDA and starting, it took some 5 to 8 minutes until odin finished with
"REMOVED!" and the phone restarted with new ICS boot animation.
Now it's stucked on SAMSUNG logo. I've tried to reboot a few times but nothing changes. ANy help would be apreciated.
Thanks,
BruXav
Sorry for posting my q on wrong place!!
ps: the rookie I am forgot to enable debug mode before going through this :-(
Click to expand...
Click to collapse
Lol I answered you there and also said post in relevant thread, sorry

Thank you for your help and patience ;-)
When I do the combo home+power+volume down I can only volume up to enter downloading mode or cancel. I go to download but what to do next?
It says downloading...do not turn off target but nothing about factory reset.
Thank you so much!!!
Sorry I'm new here

I had same problem.. Boot into CWM, not download mode, and factory reset worked for me.
Sent from my GT-N7000 using Tapatalk 2

Thanks but how do you get in CWM mode if you can't get into the phone?
Any other button combo I don't know?
The only thing I ca do is reboot in download mode

CWM = Vol UP + Home + Power

BruXav said:
Thanks but how do you get in CWM mode if you can't get into the phone?
Any other button combo I don't know?
The only thing I ca do is reboot in download mode
Click to expand...
Click to collapse
To go to CWM mode u have to press Volume UP+Home+Power..
Not Volume down..
Volume down will get u into download mode..
Then factory reset..

octavian90 said:
I had same problem.. Boot into CWM, not download mode, and factory reset worked for me.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks but how do you do that if you can't get into the phone? Any button combo?
Thanks

spacenbeyond said:
To go to CWM mode u have to press Volume UP+Home+Power..
Not Volume down..
Volume down will get u into download mode..
Then factory reset..
Click to expand...
Click to collapse
Thanks! I did the right move and it's up and running!! I love this new Android world, my GN, this forum and the rocking stuff you guys post!!!
Thaaaaaaaaaaank you guys!!!!!

i got the same problem and factory reset does not work
what to do now?
Update: I was on 2.3.5 before update, flashing 2.3.6 now, will flash with 4.0.3 after that, will see if that helps.

2.3.6 worked fine, 4.0.3 did not. hung on boot loggo, did factory reset and rebooted end let it be on over the night. still stuck...

maidenone said:
2.3.6 worked fine, 4.0.3 did not. hung on boot loggo, did factory reset and rebooted end let it be on over the night. still stuck...
Click to expand...
Click to collapse
Did you update this way to official ICS?
http://forum.xda-developers.com/showpost.php?p=25947847&postcount=4
If you already did above, then try this:
0. Disconnect USB
1. Power off
2. Hold vol+ & home & power, let go of power once you see Samsung logo
3. You'll be in a special recovery mode. From here you can choose factory reset.

hp79 said:
Did you update this way to official ICS?
http://forum.xda-developers.com/showpost.php?p=25947847&postcount=4
If you already did above, then try this:
0. Disconnect USB
1. Power off
2. Hold vol+ & home & power, let go of power once you see Samsung logo
3. You'll be in a special recovery mode. From here you can choose factory reset.
Click to expand...
Click to collapse
hung on boot loggo, did factory reset and rebooted end let it be on over the night. still stuck...
Yes, i did the above, three times.
Did you read my post? ^_^, sorry if i did not explain it clearly.
Thanks anyway

maidenone said:
hung on boot loggo, did factory reset and rebooted end let it be on over the night. still stuck...
Yes, i did the above, three times.
Did you read my post? ^_^, sorry if i did not explain it clearly.
Thanks anyway
Click to expand...
Click to collapse
Yeah, I thought maybe you skipped something. I had CheckROM v6 on mine, it's was gingerbread rom. I did a PC Odin upgrade using the stock ICS, and everything was still there working. I did do another factory reset tonight from the settings and not in the recovery menu. Could it be a corrupted download of stock ICS? Some people were saying if you had a custom ICS before, this method won't work. Are you able to put back stock gingerbread?

I have this same problem. Cant get past samsung logo. I tried flashing several times, did factory reset, just wont work. I flashed using heimdall, not odin, would that make a difference?

Flashed back to 2.3.6, that works fine. Tried reflashing official ics, same problem, stuck at samsung logo. Factory reset in cwm does not work. Any ideas?

Hey buddy, I had the same problem tonight when I tried to restart my phone after a build.prop update - changing the wifi interval from 15 to 120... doh!
Got stuck at the boot screen and so out of desperation I decided to wipe, it didnt work. I was still stuck.
So I flashed XXLC1 (Open Euro) from http://forum.xda-developers.com/showthread.php?t=1424997 with PC Odin and it came back ok . I lost root though but thats no biggie, at least I have a working phone now.
Hope that helps you. Good Luck!

Galaxy S + 9001 stuck in bootloop - can't flash with Odin

Hi.
I have a Galaxy S+ I9001. I had cranyum rom installed on it. One day it just restarted and after it got stuck in bootloop.
It onlyshows SAMSUNG logo, and then restarts and so on...
I can't get into recovery using 3 button combo, but I can get into download mode.
The problem is that it appears to write ok with Odin Multi downloader 4.43, but when it gets to the reboot part, the phone just power off and gets to the same bootloop. If I disconnect the usb cable, it shows a vertical battery icon, then black screen, again battery icon, and so on... Tryed with a different battery witch was charged to 100% before flashing because I tought that it was running low on battery, but the result was the same.
Tryed many different firmware and same behavior.
Is it possible to be a hardware problem?
Any suggestions?
Thanks.

try to flash clockworkmod then flash anther rom >>>> it worked for me in same issue like you have !
---------- Post added at 12:36 AM ---------- Previous post was at 12:31 AM ----------
or try this
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Boot-loop

It does't matter what I try to fash to the phone via Odin. It says thet the flash was successful, and goes to the same bootloop.
Tryed flashing different roms, feamod recovery, clockworkmod, bootloader. Nothing changes.

So flash full rom wit pit and then root it again then do what ever u like
Sent from another galaxy powered by CM10 & Syiah

The problem is that it's a Galaxy S Plus - I9001. I can't flash it with PIT file. That's only for Galaxy S - I9000.
Does the pit file works for Galaxy S+ also? All that I found with pit file was for Galaxy S.
I can flash mine with AriesOPS, but that doesn't do the trick. Same bootloop after flashing.

cturcu2004 said:
The problem is that it's a Galaxy S Plus - I9001. I can't flash it with PIT file. That's only for Galaxy S - I9000.
Click to expand...
Click to collapse
First remove battery and press power for a min, remove sim card and ext SD card and than reinsert battery and go into download mode Download the CWM 6.0 recovery, link on My Android Collections below and try to get recovery First, than go into recovery , In recovery WIPE (wipe data/factory reset + wipe cache partition + format /system) enter advanced and wipe dalvik cache too than flash the ROM

I allready tried to do that. It flashes ok with odin multi downloader 4.43, but when it goes to restart, the phone gets back in the loop, and I can't get it to recovery via vol up+power (with or without usb connected). It just gets to the same boot loop in witch displays just the SAMSUNG logo for about one second, the restarts, and so on.

cturcu2004 said:
I allready tried to do that. It flashes ok with odin multi downloader 4.43, but when it goes to restart, the phone gets back in the loop, and I can't get it to recovery via vol up+power (with or without usb connected). It just gets to the same boot loop in witch displays just the SAMSUNG logo for about one second, the restarts, and so on.
Click to expand...
Click to collapse
Don't let it restart after flash by unticking auto reboot and than pull out battery after flash, reinsert battery and use combo key to enter recovery

Still no luck. Same behavior. Nothing changed.

cturcu2004 said:
Still no luck. Same behavior. Nothing changed.
Click to expand...
Click to collapse
ok, try switch to this flasher and do a wipe at the same time http://forum.xda-developers.com/showthread.php?t=1574149

Unfortunately, from what I have read, that flasher is used with the phone started and connected to the pc in debugging mode.
I've just tryed anyway. Nothing to lose
Nothing changed.
I really believe that it's a hardware problem.

So, any other ideeas? Or it's really bricked?

cturcu2004 said:
So, any other ideeas? Or it's really bricked?
Click to expand...
Click to collapse
No, its not bricked, the solution may lie in the technique , have you tried these http://forum.xda-developers.com/showthread.php?t=1660596 , :victory:BUT First it may wise IF used another PC or Lap top, just to be sure and also download a Broodplank ROM to flash

What is a broodplank ROM?
Sent from my GT-I9000 using xda app-developers app

The problem it's that in the link that you provided, I must have access to recovery witch I do not have.
Or to use ADB, witch is possible if the phone goes after the Samsung logo at startup, but mine restarts exactly after the logo without going further.
Sent from my GT-I9000 using xda app-developers app

cturcu2004 said:
What is a broodplank ROM?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Broodplank is the developer of BroodROM, just look at the signature of the link I gave you earlier for his ROM's

cturcu2004 said:
I can't get into recovery using 3 button combo, but I can get into download mode.
Click to expand...
Click to collapse
Umm.. correct me if I'm wrong here, wasn't that a 2 button combo in I9001? I have personally flashed my friends I9001 and it was, like [vol+, power on]?

You are right is two buttons combo.
It's just an expression.
But it does not work anyway.
Sent from my GT-I9000 using xda app-developers app

xsenman said:
Broodplank is the developer of BroodROM, just look at the signature of the link I gave you earlier for his ROM's
Click to expand...
Click to collapse
Will have a look to see if that helps.
Thanks.
Sent from my GT-I9000 using xda app-developers app

Have you tried holding the button combo a little longer? Don't get this the wrong way, from my experience I know that getting to recovery on i9001 can be a little pain in the a$$ and I really don't know why. Sometimes it works and sometimes it doesn't.

Help, don't know how to reinstall OS

Hello to all,
I have some issues with my samsung galaxy s advance i9070 working with stock JB JZO54K.I9070XXLQE. With the rooted phone, I wanted to install CWM and followed the procedure, as I entered in recovery mode and accessed the first .zip file. It started to install. Next step was to press the home screen button and touch the display till the screen will show the new recovery interface. But nothing happened. I forgot to mention that I did wipe data/factory reset, wipe cache before starting anything.
My phone started normaly but it seems something wrong happened as it was showing some errors about google apps and almost all google apps disappeared. I shut down system and try again the same procedure, but still nothing happened. Same errors...so I wanted to flash the JB 4.1.2 stock ROM with Odin to get rid of those errors. So after I downloaded from sammobile the firmware, flash it, everything went ok till the phone had to reboot...it remained at the black screen showing the samsung i9070 white logo. I waited for Odin to show pass and disconected. Tried to restart but nothing happens. Still that black screen showing the samsung i9070 white logo. I reflash it second time with Odin using other JB 4.1.2 stock ROM. The problem is the same.
What can I do ? How can I fix the problem? I can enter only in download mode.
I'm new with the android OS. Pls help !

Fireblad3 said:
Hello to all,
I have some issues with my samsung galaxy s advance i9070 working with stock JB JZO54K.I9070XXLQE. With the rooted phone, I wanted to install CWM and followed the procedure, as I entered in recovery mode and accessed the first .zip file. It started to install. Next step was to press the home screen button and touch the display till the screen will show the new recovery interface. But nothing happened. I forgot to mention that I did wipe data/factory reset, wipe cache before starting anything.
My phone started normaly but it seems something wrong happened as it was showing some errors about google apps and almost all google apps disappeared. I shut down system and try again the same procedure, but still nothing happened. Same errors...so I wanted to flash the JB 4.1.2 stock ROM with Odin to get rid of those errors. So after I downloaded from sammobile the firmware, flash it, everything went ok till the phone had to reboot...it remained at the black screen showing the samsung i9070 white logo. I waited for Odin to show pass and disconected. Tried to restart but nothing happens. Still that black screen showing the samsung i9070 white logo. I reflash it second time with Odin using other JB 4.1.2 stock ROM. The problem is the same.
What can I do ? How can I fix the problem? I can enter only in download mode.
I'm new with the android OS. Pls help !
Click to expand...
Click to collapse
Try to wipe cache and do factory reset now again.

Flash again stock firmware with Odin, if you are able to enter ONLY in download mode. Download again stock firmware and compare the dimensions of files to see if there any difference.
Maybe you flashed a corrupt file.
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
shut_down said:
Try to wipe cache and do factory reset now again.
Click to expand...
Click to collapse
He can't enter in recovery. Only Download Mode.

R_a_z_v_a_n said:
Flash again stock firmware with Odin, if you are able to enter ONLY in download mode. Download again stock firmware and compare the dimensions of files to see if there any difference.
Maybe you flashed a corrupt file.
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
He can't enter in recovery. Only Download Mode.
Click to expand...
Click to collapse
Yes, i can only enter download mode. After comparing the stock firmwares, I'll try to flash again with Odin. It mathers what version of Odin I'm using ? What should I do if it still won't reboot ?

Flash and leave phne connected until reboot and apear the screen with Google account. I don't see any reason to not boot and hope you have luck.

R_a_z_v_a_n said:
Flash and leave phne connected until reboot and apear the screen with Google account. I don't any reason to not boot and hope you have luck.
Click to expand...
Click to collapse
I'll try and return...hope it'll work cause I read all kind of crap on google but didn' find an answer

Hey...I've finally managed to flash it with stock JB and the system starts normaly...You were right about the dimension of the firmware package, thanks a lot. That's one part of the problem solved. The other part of it is that the phone still refuses to go into recovery mode. What is to be done now ?
Is there a way of flashing with Odin a Recovery Mod ? CWM ?

Turn off the phone, pull out the battery for few seconds and after that press in the same time buttons : Power + Volume Up + Home.
Remember IN THE SAME TIME must press all three buttons and wait until you feel a short vibration.
Powered by CM10.1

R_a_z_v_a_n said:
Turn off the phone, pull out the battery for few seconds and after that press in the same time buttons : Power + Volume Up + Home.
Remember IN THE SAME TIME must press all three buttons and wait until you feel a short vibration.
Powered by CM10.1
Click to expand...
Click to collapse
Thank you so much. I've done it like you said and worked.
Now my phone is prepared and also rooted it.
What's the next step to install CWM corectly ?

Follow this guide...
http://forum.xda-developers.com/showthread.php?t=2198341
Powered by CM10.1

Fireblad3 said:
Thank you so much. I've done it like you said and worked.
Now my phone is prepared and also rooted it.
What's the next step to install CWM corectly ?
Click to expand...
Click to collapse
1-Download and install Universal kernel Flasher from http://forum.xda-developers.com/showthread.php?t=2137598
2-Download CoCore E kernel From http://forum.xda-developers.com/showthread.php?t=2140597
3-Extract kernel.bin.md5 from CoCore zip
4-Use UKF to flash that

Thank you, I followed http://forum.xda-developers.com/showthread.php?t=2198341 and all went perfectly.
Now I want to mount external sd card as my phone memory so that all the apps install there (specially the games like nfs, gta ...) What is the easyest way to do that ?

Here the thread with your needs.
http://forum.xda-developers.com/showthread.php?t=2154811&highlight=swap

R_a_z_v_a_n said:
Here the thread with your needs.
http://forum.xda-developers.com/showthread.php?t=2154811&highlight=swap
Click to expand...
Click to collapse
Thanks again. I'll try it right away. It could be a problem if I have already an Ext2 and a fat32 partition on my external sd card ?

Please, read carefully that thread for all the explanations.

R_a_z_v_a_n said:
Please, read carefully that thread for all the explanations.
Click to expand...
Click to collapse
I have read all the pages, but it dosen't says anything about partitions..It means the memory card should be a normal fat32 partition ?

Sorry, but you must ask in that thread. I don't use that setting and don't know to much about.

I have solved it like this : made a single FAT32 partition. Installed the .zip for change memory, reboot and now my device is showing my 32Gb memory card as internal memory and also installing apps on it. I noticed that some apps or part of them still go in the system partition (not USB storage) cause it fills some of that space too.