Database Develop

Legend S-OFF is out

You can find it on:
http://alpharev.nl/
HBOOT 1.0+ is NOT supported
MOD EDIT: No shouting please!

Boot from ISO and follow instructions yea? Is it safe to boot from USB?

i have 1.0

it works

Damn, why not at my device....?!
http://forum.xda-developers.com/showpost.php?p=10176241&postcount=130

aikon96 said:
Damn, why not at my device....?!
http://forum.xda-developers.com/showpost.php?p=10176241&postcount=130
Click to expand...
Click to collapse
Nand backup CM 6.1, pull the backup to your PC (just to be sure). Install a rooted stock ROM, then try.

ogo2 said:
it works
Click to expand...
Click to collapse
I can't get it to work.. can't access fastboot in step 1 tried power for several minutes..

whitetigerdk said:
I can't get it to work.. can't access fastboot in step 1 tried power for several minutes..
Click to expand...
Click to collapse
Here is the same with Hboot: 0.43.0001. its get complete freezed until I remove the battery, but its not bricked

Suppe123 said:
Here is the same with Hboot: 0.43.0001. its get complete freezed until I remove the battery, but its not bricked
Click to expand...
Click to collapse
Jeeeezz-US! You were lucky...

Ok maybe we should use this thread
Suppe123 said:
Here is the same with Hboot: 0.43.0001. its get complete freezed until I remove the battery, but its not bricked
Click to expand...
Click to collapse
Same problem, haven't been able to find a solution so far

when cell is in hboot usb plug, before turn in fastboot try to navigate with vol+ and vol - and when you see it isn't freeze, push anykey of pc and when it says turn your phone into fastboot do it.

juanporrero said:
when cell is in hboot usb plug, before turn in fastboot try to navigate with vol+ and vol - and when you see it isn't freeze, push anykey of pc and when it says turn your phone into fastboot do it.
Click to expand...
Click to collapse
Tried that, even tried going into fastboot, and back to HBOOT doesn't work either
I've got bootloader 0.43.001 I had the keep it simple froyo rom installed when trying. I'll try the keep it simple eclair rom now

JonasDroid said:
Tried that, even tried going intofastboot, and back to HBOOT doesn't work either
I've got bootloader 0.43.001 I had the keep it simple froyo rom installed when trying.
Click to expand...
Click to collapse
Same thing is here

does this mean we can now change the partitions sizes?

eclair rom didn't help either, didn't really expect it to help but it was worth the try.
Any other suggestions? looks like much off us have this problem
How did you burn the iso (the ones with the fastboot problem)?
I burned it using the build in windows image burner onto a CD. I might try a USB later on but I'll stop trying for now

i do it with azure

Threadstarter,
Can you provide us a complete steps (Tutorial)on how to S-OFF the Hboot ? I totally do not understand, as i have never flash such thing before. I'm using the rooted HTC official Froyo ROM found in xda forum

foosoomin said:
Threadstarter,
Can you provide us a complete steps (Tutorial)on how to S-OFF the Hboot ? I totally do not understand, as i have never flash such thing before. I'm using the rooted HTC official Froyo ROM found in xda forum
Click to expand...
Click to collapse
Burn the iso and boot from it. The rest of the instructions are given to you as you go
Swyped from my HTC Legend

Is it normal that you need to press the power at the right time 2ce?
I managed to get past the first by some pretty stupid method which I'm not going to make public if I'm not sure that it works (cause it's pretty risky)
But that same method doesn't work the second time in step 2/3.
Or isn't it supposed to ask for that a 2nd time?
So I had to pull my battery out in the 2nd step and it showed a message that it was unable to flash the HBoot but luckily the old was still intact.

S-OFF on first try
I used unetbootin to make a usb boot pen, then boot into tiny core, followed instructions and S-OFF

can someone help

i am taking my phone back to sprint today and idk what i have to do so they dont know i messed with it, do i unroot it and how would i go about doing that or can i reset it, or could i just flash like a stock rom??
thanks and any help will really help

xxxk15 said:
i am taking my phone back to sprint today and idk what i have to do so they dont know i messed with it, do i unroot it and how would i go about doing that or can i reset it, or could i just flash like a stock rom??
thanks and any help will really help
Click to expand...
Click to collapse
you could try just a stock rom.. are you returning it and never getting it back, or just getting it worked on?? if you are never getting it back it would probably be a good idea just to RUU it and take it back completly stock..

i am selling it back to sprint and getting the evo... and where do i do the ruu flash at?? i tried to flash it in recovery but it did not work and i cant figure out how to flash it in fastboot.. could you explain it??

xxxk15 said:
i am selling it back to sprint and getting the evo... and where do i do the ruu flash at?? i tried to flash it in recovery but it did not work and i cant figure out how to flash it in fastboot.. could you explain it??
Click to expand...
Click to collapse
are you s-off or s-on?? if you dont know what that is, assume you are s-on.. i will give you scenarios for both..
s-on use this LINK
s-off use this LINK
again if you dont know what s-off is assume you are s-on..

pstevep said:
are you s-off or s-on?? if you dont know what that is, assume you are s-on.. i will give you scenarios for both..
s-on use this LINK
s-off use this LINK
again if you dont know what s-off is assume you are s-on..
Click to expand...
Click to collapse
how do you know which one you are?? the s off i cant figure out how to use it and on s on i dont have that one command on my fastboot

like on s off it tells me to do this command and i dont know where i should be for this, in fastboot??

sorry for all the questions i am not the best with electronics and also in s on i dont have this command "Run the command "fastboot oem rebootRUU""

xxxk15 said:
sorry for all the questions i am not the best with electronics and also in s on i dont have this command "Run the command "fastboot oem rebootRUU""
Click to expand...
Click to collapse
you have to have the phone connected to the computer, and run those commands through adb in your command prompt, thats where that comes in to play.. those are typed commands..

xxxk15 said:
how do you know which one you are?? the s off i cant figure out how to use it and on s on i dont have that one command on my fastboot
Click to expand...
Click to collapse
you know you are s-off or s-on by what it says at the top of your screen when you are in fastboot mode on your phone..

like in my fastboot menu i only have (Hboot mood, Reset Device, and restart to hboot) and none of those are helping. idk if i need a newer recovery menu i have RA- heroc-v1.5.2

xxxk15 said:
like in my fastboot menu i only have (Hboot mood, Reset Device, and restart to hboot) and none of those are helping. idk if i need a newer recovery menu i have RA- heroc-v1.5.2
Click to expand...
Click to collapse
see the above posts before yours.. takes a computer..

on fastboot it only says like my radio # and date but nothing about s on or s off

pstevep said:
see the above posts before yours.. takes a computer..
Click to expand...
Click to collapse
ok sorry man i am just trying to do this before i go in like 10 minutes but dont understand any of it but thanks for all your help

xxxk15 said:
on fastboot it only says like my radio # and date but nothing about s on or s off
Click to expand...
Click to collapse
if you have never flashed anything to make yourself s-off, then you would be s-on.. you would have to have read about it and known that you were doing it.. so assume you are s-on..
have you ever ran adb on your computer with the phone??
you have to attach the phone to your computer go in to command prompt, and then follow the steps in the link for s-on..
if you have never used adb before i will have to find you a link, but off the top of my head i dont have the steps (at work)..

xxxk15 said:
ok sorry man i am just trying to do this before i go in like 10 minutes but dont understand any of it but thanks for all your help
Click to expand...
Click to collapse
all else fails just put a sense rom on it.. they probably wont know the difference anyway.. your warranty is already past on the hero anyway so that shouldnt matter.. i wouldnt worry about it.. just ROM it and let it go..

pstevep said:
if you have never flashed anything to make yourself s-off, then you would be s-on.. you would have to have read about it and known that you were doing it.. so assume you are s-on..
have you ever ran adb on your computer with the phone??
you have to attach the phone to your computer go in to command prompt, and then follow the steps in the link for s-on..
if you have never used adb before i will have to find you a link, but off the top of my head i dont have the steps (at work)..
Click to expand...
Click to collapse
i have used the command prompt before but not that well with it i will just try to get it through but thanks

All you have to do is go to www.HTC.com, navigate to the hero cdma section, and download and install the 2.1 update.
You will be unrooted and completely back to stock. You don't need all this fastboot and command stuff. Some people over complicate stuff on here.
Sent from my HERO200 using XDA App

MrDowntown12 said:
All you have to do is go to www.HTC.com, navigate to the hero cdma section, and download and install the 2.1 update.
You will be unrooted and completely back to stock. You don't need all this fastboot and command stuff. Some people over complicate stuff on here.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
i wasnt trying to ovre complicate anything.. he asked how to flash it.. thats the answer i gave.. he asked a similar question in another thread..

Why would anyone root and flash if they don't COMPLETELY understand this... then waste pst's time trying to help him. READ the damn board, this I know for a fact has been discussed in MANY threads.
And there is a difference with flash. Sorry the more techies here know this and think differently.
®patience is a virtue©

MattCrystal said:
Why would anyone root and flash if they don't COMPLETELY understand this... then waste pst's time trying to help him. READ the damn board, this I know for a fact has been discussed in MANY threads.
And there is a difference with flash. Sorry the more techies here know this and think differently.
®patience is a virtue©
Click to expand...
Click to collapse
[email protected] and sig. Relax, we were all new at one time or another, and what may be simple to you may be difficult to others.
-----
Sent from my CDMA Hero. I got some hot Ginger-on-Hero action here!

[Q] Help flashing blackrose hboot

So this has been mind breaking for me. I failed to flash the blackrose hboot everytime i trie and on every rom. It gets to the point where it has sent it files and then it says <waiting for device>. This happens on stock, BuglessBeast, rcadsmixhd 2.3 & 1.6 and hypersense (i like sense ). Anyone has any advice . Btw it did not brick it.

the problem your having isn't actually related to which rom your using on your phone. its that its not being detected as an adb device. you need to make sure that your drivers are installed and you see it in device manager as an ADB interface under Android Phone.

m0_t3 said:
the problem your having isn't actually related to which rom your using on your phone. its that its not being detected as an adb device. you need to make sure that your drivers are installed and you see it in device manager as an ADB interface under Android Phone.
Click to expand...
Click to collapse
Ehm, usb debugging is enabled and detected by the software at first. It gets to the point that it sends its hboot and after that it says something like error: deviceoffline and then stuck on waiting for device forever.

it could be that another program like PDAnet is interfering.
do you use any other programs on your PC that would use adb?

m0_t3 said:
it could be that another program like PDAnet is interfering.
do you use any other programs on your PC that would use adb?
Click to expand...
Click to collapse
well maybe htc sync but that was closed and its process was killed by taskmanager. No other programs i can think of.

well if your drivers are fine and there is nothing causing some form of interruption then. its probably an issue coming from the phone.
since you've tried it with so many different roms am guessing you didnt bother running/installing any apps
try it without the SD card inserted maybe.
thinking i should try and see if i can't replicate your issue find out what the issue is.

m0_t3 said:
well if your drivers are fine and there is nothing causing some form of interruption then. its probably an issue coming from the phone.
since you've tried it with so many different roms am guessing you didnt bother running/installing any apps
try it without the SD card inserted maybe.
thinking i should try and see if i can't replicate your issue find out what the issue is.
Click to expand...
Click to collapse
SO without my sd card it did not make any difference, apart from that it now mixes the message: adb server is out of date. Killing... and then waiting for device again.

the first time i installed blackrose i didn't use this method but maybe you can try flashing the hboot manually, which is what i normally do now, find it more straight forward.
[edit]
is your bootloader unlock?

m0_t3 said:
the first time i installed blackrose i didn't use this method but maybe you can try flashing the hboot manually, which is what i normally do now, find it more straight forward.
[edit]
is your bootloader unlock?
Click to expand...
Click to collapse
Ehm obviously yes how i can flash roms other wise? How do i flash this hboot then. BTW i have slcd nexesus one phone if that matters

http://forum.xda-developers.com/showthread.php?t=1270589
download the manual version zip file from there. the instructions are contained inside the zip.
he removed the caution about slcd N1's so i think that shouldn't be a problem anymore.

m0_t3 said:
http://forum.xda-developers.com/showthread.php?t=1270589
download the manual version zip file from there. the instructions are contained inside the zip.
he removed the caution about slcd N1's so i think that shouldn't be a problem anymore.
Click to expand...
Click to collapse
WOW you are awesome sir thank you now it works i wish you could click the thanks button 30.000 times.

race55 said:
Ehm obviously yes how i can flash roms other wise? How do i flash this hboot then. BTW i have slcd nexesus one phone if that matters
Click to expand...
Click to collapse
You can easily flash ROMs without unlocking the bootloader. All that is required is to root the original OS and install a custom recovery using a program like ROM Manager.
But I believe the phone is detected differently when in fastboot mode. Did you verify that the phone is still properly recognized in device manager when in fastboot mode?
What happens if you put the device into fastboot mode (holding the trackball when powering on) and you type fastboot devices at your command prompt?

Awesome.
Glad to help ^_^
Sent from my Nexus One using xda premium

Not directly related but I had to use BREditor and create a new hboot with the 200/16/220 layout and flash that. I just could not get the ICS roms to flash otherwise... strange...

bassmadrigal said:
You can easily flash ROMs without unlocking the bootloader. All that is required is to root the original OS and install a custom recovery using a program like ROM Manager.
But I believe the phone is detected differently when in fastboot mode. Did you verify that the phone is still properly recognized in device manager when in fastboot mode?
What happens if you put the device into fastboot mode (holding the trackball when powering on) and you type fastboot devices at your command prompt?
Click to expand...
Click to collapse
It gives me attached device: Ht9 and thencq lot of numbers
Sent from my HTC Nexus One using XDA App

race55 said:
It gives me attached device: Ht9 and thencq lot of numbers
Click to expand...
Click to collapse
Well, that definitely means that your device is recognized. Did you get it working?

bassmadrigal said:
Well, that definitely means that your device is recognized. Did you get it working?
Click to expand...
Click to collapse
Ehm using manual method it worked. It was kinda confusing because in the blackrose thread it says that u must use manual for osx. He should update his post

race55 said:
Ehm using manual method it worked. It was kinda confusing because in the blackrose thread it says that u must use manual for osx. He should update his post
Click to expand...
Click to collapse
If you throw a post at the end stating what you had to do, he would probably update his original post.

Not directly related but I had to use BREditor and create a new hboot with the 200/16/220 layout and flash that. I just could not get the ICS roms to flash otherwise... strange...
Click to expand...
Click to collapse
ICS is too big for the stock ROM space on the N1, so you need to make those alterations so it can fit. texasice did make a striped down version that works on stock though.

race55 said:
Ehm obviously yes how i can flash roms other wise? How do i flash this hboot then. BTW i have slcd nexesus one phone if that matters
Click to expand...
Click to collapse
If you are like me, you have been flashing ROMS on your phone for years before you ever unlocked the bootloader. I didn't do it until about 6 months ago because I needed to flash Blackrose. Also, don't bite the hand that is trying to feed you.

[Q] Bricked my HTC ONE - please help will reward

All,
New to htc and flashing, and try doing at 3am didn't help either. hope someone can help. Will paypal $50 to anyone that can help. Thanks in advance.
Here's what i did
using One_S_All-In-One_Kit_v3.5 for all my modding
got token
unlocked bootloaded
didn't flash any recovery
flash a new .img kernel, but i used a boot.img from a zip file (home2wake zip) - don't ask why, i wasn't thinking lol
phone rom was all black, keeps rebooting
i managed to flash recovery, recovery-clockwork-6.0.3.1-m7wls.img
then wanted to restore stock rom
so i downloaded, this rom, http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
flashed zip using recovery
went through the rom custom installation of what i wanted installed.
After that it rebooted and stuck on green htc screen
i can get back into boot loader, but can't load recovery, can't factory reset, any option i select, the screen flash and sends me back to bootloader
rom won't load, can't get into recover, computer not detecting phone
Please help!!!

Check out this maybe a RUU will help -
http://forum.xda-developers.com/showthread.php?t=2251800

Why did you use one s kit, I'm confused
Sent from my HTCONE using xda premium

you can try to load ADB Fastboot on your PC, then connect your phone via usb, be sure to have all of the drivers.
in bootloader, if it reads FASTBOOT USB, then you can us
fastboot flash recovery (Name of recovery).img
once that is done you should be able to at least get back into recovery....
check the link for recovery file
http://forum.xda-developers.com/showthread.php?t=2236418

I am no expert, but my guess would be to go back to stock boot / recovery: http://forum.xda-developers.com/showthread.php?t=2236418
Relock your phone: fastboot oem lock
Install the RUU: http://forum.xda-developers.com/showthread.php?t=2250904
And in the future don't use an All-In-One-Kit meant for another phone (The One S in your case)
p.s. Another thread that may help get you back to square one: http://forum.xda-developers.com/showthread.php?t=2251800

thanks all,
will try all the suggestions above tonight, will let you guys know how it goes. i used the all one s because it was gui and easy and lots of extra and functions. but i guess the extra made it worst.
Right now when i plug in my phone the computer doesn't detect anything, hopefully the adb can talk to it to flash a new recovery/rom/kernel.

Pm me
Sent from my HTCONE using Tapatalk 2

It wasn't the extras that messed it up. It was the fact you were using an AIO that isn't for your device. That's a big no no.
Sent from my HTCONE using xda app-developers app

gu12u7 said:
thanks all,
will try all the suggestions above tonight, will let you guys know how it goes. i used the all one s because it was gui and easy and lots of extra and functions. but i guess the extra made it worst.
Right now when i plug in my phone the computer doesn't detect anything, hopefully the adb can talk to it to flash a new recovery/rom/kernel.
Click to expand...
Click to collapse
Once you get back to stock with the RUU, use Hassoon2000's all in one kit...n00b proof!

P_M_G said:
Once you get back to stock with the RUU, use Hassoon2000's all in one kit...n00b proof!
Click to expand...
Click to collapse
i was using this, all of the recovery on there were for samsung s3/s4/and special edition. so i couldn't get to the recovery. Then i started tweaking around with the extras and flashed a boot.img to a kernel. failed

Android Revolution ROM is not for the sprint htc one. fyi

First you'll need this file http://forum.xda-developers.com/showthread.php?t=2250904
Extract to someplace you can find it, maybe the desktop
if you power the phone down then hold the vol - button does it boot into bootloader?
if so make sure you have the htc fastboot drivers installed from htc sync
if your on a windows machine from command prompt navigate to the platform-tools folder
for example
mine is in C:/users/ray/downloads/adt-bundle-windows-x86_64/adt-bundle-windows-x86_64/sdk/platform-tools
in command prompt issue the command
fastboot oem lock
once the bootloader is re-locked
issue the command
fastboot oem rebootRUU
the phone should reboot into a black screen with greenish htc letters
find the setup.exe file from the ruu file and run it.
if all goes well you should be back to stock with a locked bootloader.
good luck

Awesome, unbricked it! Thank you wranglerray!!!!!!
Also thanks to everyone that replied, but it was wranglerray detailed step that helped me through it. awesome community.
as promised, send me your paypal account wranglerray, i'll send you the $50

Let this thread be a lesson that 1) don't mess with your phone if you don't know what you're doing and 2) don't flash a GSM ROM on your Sprint phone because it wipes your boot and recovery partition (on GSM phones, it wipes data and system but sprints partitions are different).
Sent from my HTCONE using Tapatalk 2

-viperboy- said:
Let this thread be a lesson that 1) don't mess with your phone if you don't know what you're doing and 2) don't flash a GSM ROM on your Sprint phone because it wipes your boot and recovery partition (on GSM phones, it wipes data and system but sprints partitions are different).
Sent from my HTCONE using Tapatalk 2
Click to expand...
Click to collapse
failing is learning. but more like read all the instructions before messing with your phone.

P_M_G said:
Once you get back to stock with the RUU, use Hassoon2000's all in one kit...n00b proof!
Click to expand...
Click to collapse
Isn't that a One X only kit?

gu12u7 said:
Awesome, unbricked it! Thank you wranglerray!!!!!!
Also thanks to everyone that replied, but it was wranglerray detailed step that helped me through it. awesome community.
as promised, send me your paypal account wranglerray, i'll send you the $50
Click to expand...
Click to collapse
That's what these forums are all about no need to send money. Glad I could help you.

gu12u7 said:
failing is learning. but more like read all the instructions before messing with your phone.
Click to expand...
Click to collapse
Failing after making a bunch of random attempts to do something doesn't constitute learning. Next time you should make sure you actually understand what it is that you are trying to do before you do it, and maybe then you won't end up almost completely wiping your phone clean.
You're lucky that the international One's and Sprint Ones partitions aren't like the Sprint/international S3, or else you would've overrided your bootloader as well and had a brick on your hands.

Major root issues HELP! partial brick?

*First of all, I'm posting here because I haven't had enough posts for the dev section yet..*
So...I've never had any issues rooting and installing ROMs.. not that I've done a TON, but two phones and 3 tablets, so I little ha..
Got my HTC One unlocked and rooted fine with the All-in-one tool, which worked good enough, but when I tried to get a ROM working is when I ran into issues.
I guess I'll tell the main issue first and then explain what happened..
Either only boots to bootloader/fastboot,
OR
Gets stuck on HTC logo and never leaves..
Am I screwed?
What I did that I think effed it...
After getting rooted and running, I tried to install RenovateROM_1.0...kept just randomly stopping and giving an error about "asset failed..." and just booted normally (no ROM)
I googled the hell out of that I tried editing the updater-script like I saw in so many places, and then I screwed up cause it was 3:30am and I was sick of trying.
I was gonna wipe the cache and data before I tried installing again, but I ended up wiping System in there and possibly Dalvik cache as well..
(I know that was stupid now!!!! Feel free to remind me haha..)
And now it's stuck.
If I try install a ROM, it says it completes, but won't boot past fastboot/bootloader.
If I re-flash my TWRP with fastboot, then reboot-bootloader, THEN reboot, it gets the HTC and stays.
Can someone please help me?
Thanks much in advance..
-Shaun

I did that too kinda (wiped everything on accident) Try to ADB sideload the Rom in the advanced options to TWRP otherwise you have to download the RUU and relock the phone up etc. And start over.
Sent from my HTCONE using xda app-developers app

Skyymiles said:
I did that too kinda (wiped everything on accident) Try to ADB sideload the Rom in the advanced options to TWRP otherwise you have to download the RUU and relock the phone up etc. And start over.
Click to expand...
Click to collapse
Thanks for the reply! Can you possibly link me to a decent tut on how to use RUU? I never have.
I guess I can just look too, but seems like they're always different depending on the phone!

Is that even a Sprint HTC One rom?

bigdaddy619 said:
Is that even a Sprint HTC One rom?
Click to expand...
Click to collapse
It's under Sprint HTC One Dev so I figured? Is that accurate or am I missing something?
I'm trying to start ADB sideload from twrp and it just sits at "Starting ADB sideload feature..."
and ADB says "error: no device found"
thanks for helping out!

burnface said:
It's under Sprint HTC One Dev so I figured? Is that accurate or am I missing something?
I'm trying to start ADB sideload from twrp and it just sits at "Starting ADB sideload feature..."
and ADB says "error: no device found"
thanks for helping out!
Click to expand...
Click to collapse
AFAIK there are 4 HTC One forums
HTC One
Sprint HTC One
AT&T HTC One
T-Mobile HTC One
You may have flashed a rom for another variant do you have a link I didn't see that rom listed

Your right bigdaddy, shaun you flashed a gsm rom i'm guessing from the unbranded forum.
Download the ruu from this thread
http://forum.xda-developers.com/showthread.php?t=2250904
boot your phone into bootloader and make sure your bootloader is in fastboot
extract that ruu file to somewhere you can find easily maybe the desktop
open your command prompt and navigate to your android sdk folder and run this fastboot command
fastboot oem lock
then after you've relocked the bootloader
run the command
fastboot oem rebootRUU
run the setup.exe from the ruu file and let it return you to stock

bigdaddy619 said:
AFAIK there are 4 HTC One forums
HTC One
Sprint HTC One
AT&T HTC One
T-Mobile HTC One
You may have flashed a rom for another variant do you have a link I didn't see that rom listed
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2241016&highlight=boot+img
That's where I got it, and it's under sprint.. my bad I guess!! Thanks for pointing that out, I'll work on it in a bit again!

burnface said:
http://forum.xda-developers.com/showthread.php?t=2241016&highlight=boot+img
That's where I got it, and it's under sprint.. my bad I guess!! Thanks for pointing that out, I'll work on it in a bit again!
Click to expand...
Click to collapse
ViperOne is a Sprint rom but you said
After getting rooted and running, I tried to install RenovateROM_1.0
Click to expand...
Click to collapse
So I assumed it was from one of the variants
Maybe sending -viperboy- a PM with a link to this thread maybe he can help get you going

that's actually vipers rom.
http://forum.xda-developers.com/showthread.php?t=2202696
I found this link on the m7 forum is this what you flashed? if so this for the non-branded gsm htc one and not the cmda sprint htc one
it also looks like you flashed the renovate rom initial release, That dev is using svn to update nightlies. I'm guessing the "sprint support" is in one of those updates and not the initial release

bigdaddy619 said:
ViperOne is a Sprint rom but you said
So I assumed it was from one of the variants
Maybe sending -viperboy- a PM with a link to this thread maybe he can help get you going
Click to expand...
Click to collapse
OOoohhhhhhhhh.................I'm an idiot!! Like I said, 3:30 and apparently didn't do enough checking around....right now I don't even care what I have on it for a ROM, I just want it to work so I don't feel like I ruined it already haa..
Should I still follow those steps to try fix?
Thank you guys so much!

Try the steps wranglerray posted here

bigdaddy619 said:
Try the steps wranglerray posted here
Click to expand...
Click to collapse
Awesome.. Well it says "Sending.............................." so after that process is done it should be stocked and locked? Or is there a final step?
Worked!! Thank you both bigdaddy19 and wranglerray! You helped my piece of mind immensely

TBO I have never ran an RUU haha
Check this How To Unroot and Flash your HTC One Stock!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
burnface said:
Awesome.. Well it says "Sending.............................." so after that process is done it should be stocked and locked? Or is there a final step?
Worked!! Thank you both bigdaddy19 and wranglerray! You helped my piece of mind immensely
Click to expand...
Click to collapse
Cool glad you got it going

burnface said:
Awesome.. Well it says "Sending.............................." so after that process is done it should be stocked and locked? Or is there a final step?
Worked!! Thank you both bigdaddy19 and wranglerray! You helped my piece of mind immensely
Click to expand...
Click to collapse
good deal. Just remember to read everything before flashing. And if your unsure ask. I've had very minimal issues with flashing and changing settings but when I have its been totally my fault for not completely reading an op. if you flash and go back to read a step you've missed its usually too late.

wranglerray said:
good deal. Just remember to read everything before flashing. And if your unsure ask. I've had very minimal issues with flashing and changing settings but when I have its been totally my fault for not completely reading an op. if you flash and go back to read a step you've missed its usually too late.
Click to expand...
Click to collapse
The sad part is I didn't think I had a question ha.. but definitely learned from it. Thanks
Sent from my HTCONE using Tapatalk 2

burnface said:
The sad part is I didn't think I had a question ha.. but definitely learned from it. Thanks
Sent from my HTCONE using Tapatalk 2
Click to expand...
Click to collapse
Yeah dude, you're lucky that the international rom you flashed had asserts in it to check device type, or you might've had an actual paperweight on your hands. Stick to the Sprint forums next time.

Yeah I scared myself for sure.. even this morning activating it scared me a little cause normally use the DEC, but it said 'not a valid Sprint ESN', and the HEX
worked great.
Any ideas why that would be?
Sent from my HTCONE using Tapatalk 2