Database Develop

[Version: v4b] SEX1 Android Kernel

This is the bug fixed version of the “v4a” kernel that should work for all Android distributions for Kovsky (Xperia X1).
Change log:
+ Upgraded to GIT commit e83e7c3fccf8423bd0cf489f852f830ca6e80259
+ Kernel debugging and certain associated options for OS compatibility
Release Notes:
I’m providing two versions of “v4b” for regular and advanced users. At this time the only difference is the keyboard and buttons driver either being build inside the kernel (regular version) or outside in the modules (advanced version). In future versions there may be additional differences, but they will be detailed in my release notes.
Keyboard and buttons modules HOW-TO has been explained in other threads, if you’re thinking to yourself that you have no idea what I’m talking about I suggest sticking to the “regular version”.
Known Issues:
You will require the November 29 3D driver found at this thread: http://forum.xda-developers.com/showthread.php?t=852937. If you don’t install this your device will function completely normal outside of 3D games and applications. IMPORTANT NOTE: don’t install the gralloc driver as it will cause the screen driver to eventually lockup (otherwise known as SoD).
The camera has been fixed in the kernel source code, but the libraries in Android have no support for it. It’s not an easy fix, and it’s not going to be fixed anytime soon so support has not been built into the kernel.
Keyboard and buttons will eventually fail, this isn’t new but using a method posted in this forum for reloading the drivers (advanced version only) works!
The battery driver is very accurate up until about 50% left being reported in Android. After which it becomes somewhat unstable, reports incorrectly and may force shutdown (softly) your device. My best suggestion; consider 40-50% left as 0.
Smart feedback is appreciated.

thanks alot i will tested and back with feedback soon

are android camera libraries particular to each device or can we use libraries from other devices?

Here is the guide for advanced kernel, which allows you to wake keyboard with 1 click instead of rebooting the device. Guide is for freshly installed android (so no just updating the kernel).
1. Extract autostart.sh from the included archive and place it to your SD card
2. Install android like normal.
Until step 9, keys won't work, except for camera and power button. If you screw up, press camera button to return to the home screen.
3. If you don't have it in your release, install "Terminal Emulator" from market
4. Launch "Terminal Emulator". Soft keyboard should pop up.
5. Type "su" (everything without quotes from now on). Press enter. Symbol on the left should change to #.
6. Type "mkdir /data/opt" and press Enter.
7. Type "mv /sdcard/autostart.sh /data/opt" and press Enter.
8. Type "chmod 777 /data/opt/autostart.sh" and press Enter.
9. Type "sh /data/opt/autostart.sh" and press Enter. Software keyboard should disappear now and keys should be working.
10. Go into the market and search for "Autostart (Root)". Install that application
From here, your android is working. If you wish to add 1-click keypad fix, then continue reading, otherwise you can close this page.
11. Install application "GScript Lite" from market.
12. Open GScript Lite.
13. Press left softkey (menu) and select "Add Script".
14. Type any name, like "Fix Keyboard".
15. Tick "Needs SU?" and press "Load File".
16. Type this into bottom window:
Code:
#!/bin/sh
rmmod microp-keypad
rmmod microp-ksc
insmod /lib/modules/microp-ksc.ko
insmod /lib/modules/microp-keypad.ko
17. Press save.
18. Return to the homescreen
19. Hold your thumb to get "Add to home screen" menu.
20. Select Shortcuts --> GScript Lite --> Script that you just created.
And now, each time your keyboard or front keys stops working, simply press camera key and tap on that icon you've just created
P.S.: this is not my work, i have just adapted what users seandean and yaana created. All credits go to them.
For the kernel, first impressions are OK. Testing with release "Only T E S T E R S [New CM6.0 Full + Barebone][29-11-2010]" release + nov29 3D driver. Artefacts still present when turning device on. I will report more after testing it out a bit more.

Camera Libraries
CowMix said:
are android camera libraries particular to each device or can we use libraries from other devices?
Click to expand...
Click to collapse
HTC Touch Diamond Camera library is pefect.
http://gitorious.org/~jbruneaux/linux-on-qualcomm-s-msm/linux-msm-home-work
http://www.youtube.com/watch?v=vhz0sPjT2UA

Im testing it now on CM6.1 Barebone with 3D drivers and autostart.sh
Wifi works
GSM works
fps2d: 28FPS
Neocore-no sound: not tested
Camera is not working
3G works
Bluetooth not tested
GPS works
Notification leds work with charge state (when start android attached charger)

i cant use this kernel..
when run haret, it comes error and then boot to WM back..
it said "can't mount fs......"
help me..
is it something wrong??
im using CM6.1

are you using windows 7 OR vista ?
if use this OS , you need to remove SD card and use card reader then recopy the kernel files , use v4b advnaced with autostart.sh
regards

im using ubuntu 10 and win xp..
i try to port it same as i port the other kernel..
but the other kernel work and not getting error when running haret,but with this one i got error..
thanks for quick reply..

matejdro said:
Here is the guide for advanced kernel, which allows you to wake keyboard with 1 click instead of rebooting the device. Guide is for freshly installed android (so no just updating the kernel).
1. Extract autostart.sh from the included archive and place it to your SD card
2. Install android like normal.
Until step 9, keys won't work, except for camera and power button. If you screw up, press camera button to return to the home screen.
3. If you don't have it in your release, install "Terminal Emulator" from market
4. Launch "Terminal Emulator". Soft keyboard should pop up.
5. Type "su" (everything without quotes from now on). Press enter. Symbol on the left should change to #.
6. Type "mkdir /data/opt" and press Enter.
7. Type "mv /sdcard/autostart.sh /data/opt" and press Enter.
8. Type "chmod 777 /data/opt/autostart.sh" and press Enter.
9. Type "sh /data/opt/autostart.sh" and press Enter. Software keyboard should disappear now and keys should be working.
10. Go into the market and search for "Autostart (Root)". Install that application
From here, your android is working. If you wish to add 1-click keypad fix, then continue reading, otherwise you can close this page.
11. Install application "GScript Lite" from market.
12. Open GScript Lite.
13. Press left softkey (menu) and select "Add Script".
14. Type any name, like "Fix Keyboard".
15. Tick "Needs SU?" and press "Load File".
16. Type this into bottom window:
Code:
#!/bin/sh
rmmod microp-keypad
rmmod microp-ksc
insmod /lib/modules/microp-ksc.ko
insmod /lib/modules/microp-keypad.ko
17. Press save.
18. Return to the homescreen
19. Hold your thumb to get "Add to home screen" menu.
20. Select Shortcuts --> GScript Lite --> Script that you just created.
And now, each time your keyboard or front keys stops working, simply press camera key and tap on that icon you've just created
P.S.: this is not my work, i have just adapted what users seandean and yaana created. All credits go to them.
For the kernel, first impressions are OK. Testing with release "Only T E S T E R S [New CM6.0 Full + Barebone][29-11-2010]" release + nov29 3D driver. Artefacts still present when turning device on. I will report more after testing it out a bit more.
Click to expand...
Click to collapse
you can skip the steps 14 to 16 by downloading the attached file and pressing load file when you are in the new script page. so instead of typing all those comands you can just load this file and save it.

I have tried that, but for some reason it showed me blank screen instead of script file browser.

matejdro said:
I have tried that, but for some reason it showed me blank screen instead of script file browser.
Click to expand...
Click to collapse
it works for me most of the times but it sometimes restart the device maybe typing it out is the best way

im testing the android right now and it is a good one but i got one problem.
when i unlock my screen i got a rare screen sometimes whit green dots and sometimes whit stripes. anyone knows how to fix that?

xorium said:
im testing the android right now and it is a good one but i got one problem.
when i unlock my screen i got a rare screen sometimes whit green dots and sometimes whit stripes. anyone knows how to fix that?
Click to expand...
Click to collapse
its a known issue no it hasnt been fixed yet this problem started from v4a

kerfooly said:
its a known issue no it hasnt been fixed yet this problem started from v4a
Click to expand...
Click to collapse
okey tanks for the info

how van i connect from in android to my pc for data exchange between my sd card?
when i plug it in my computer says that i dont have the driver?

Hi!
I have been testing Android and various Kernels for a while. And I have got no good answer to a question I have. I cant get bluetooth headset to work. Cant pair them. The answer I got is that its not fixed and that it is kernel issue. Bluetooth seems to work but not to connect pheriperals.
Is there a plan for this to work or is it a thing for the future?
Its the one thing before it can actually be used for day to day work. Lotus Traveler is now released for Android so sync should work.

today i got a isseu i runned android from yesterday evening until this afternoon that my buttons dont work again. only the camera button. how can i fix this? or is it retyping the codes again?

Here working very good on CM6.1
During boot there is a line containing something like:
[KOVSKY]: is ac online == 0
or (if charger is plugged in)
[KOVSKY]: is ac online == 1
Maybe it is possible to set this parameter to be '1' at boot? So the charger would work either it is connected or not while runnig 'haret.exe'

why its not going to work for me!!!!!?????????
why it is so hard to port????
its say cannot mount partition,cannot mount fs....bla...bla...bla...
HELP ME PLEASE WITH THIS V4B KERNEL..
IM STUCK AT HARET AND THEN BOOT TO WINMO BACK..
TRYING 10000000000000 TIMES TO PORT IT..

(25/3)Best and most stable rom ever[ext2][daily-use]

Simply it's the best rom combination to be the most stable rom i have ever used and now am using it daily with no problems :-
(you may find it difficult but i swear u will be very happy with the results just give it a try)
Download rom:-
http://www.multiupload.com/T589I4WUX9
__________________________________________
Installation ...
1- Create (ext2) partation on your card ...
like in this video....
http://www.neopeek.com/viewtopic.php?f=16&t=146
2- Copy contents from the rar file to SD card ...
3- Open folder npkinstall and run install.exe
4- After restart open haret.exe normaly ...
5- download better keyboard from attachements and put it in ur androidapps folder in sd card
__________________________________________
you must do this to make ur button work and to be able to restart it by one press
open terminal emulator then type the following :-(press enter when u write the letters in each line)
Code:
su
mkdir /data/opt
cp /sdcard/autostart.sh /data/opt
chmod 755 /data/opt/autostart.sh
Then install autostart.apk (found in the rom source folder)
When your buttons stop functioning, you have to run a script from GScript that reinstalls the modules so they work once more. Perform these steps:
Install GScript.apk
Open GScript Lite and press <menu> button, then <add script>
Press the <Load file> button.
The script you need is located autmatically and is called "XPEROID Gscript Button restarter script.sh"
Select it and then in the new screen press <Save>
You can now return to your homescreen and add a shortcut to the script so you can reset your buttons easily. To do this do the following:
Press <menu> and then <add> to add widgets.
Select <shortcut> from the list and then locate and select <GScript Lite>
Then select the "XPEROID Gscript Button restarter script" and you now have a shortcut on your homescreen to reset your buttons.
_________________________________________________
thanks to "needo" for pure froyo rom main topic address
http://forum.xda-developers.com/showthread.php?t=941059
thanks to Duckly for the "keyboard as a module kernel" main topic address
http://forum.xda-developers.com/showthread.php?t=978309
thanks to tiad8 for the 3d files main topic address
http://forum.xda-developers.com/showthread.php?t=852937
note guys it's just a collective topic to make it easy for the noobs and am one of them don't be angry coz i got ur work and edited it a lil bit,,,
__________________________________________________
u can find the apps needed for keyboard restarting in androidapps folder
__________________________________________________
this allows u to get :-
Battery Life ( woooooooow so nice)
Bluetooth ( u can accept items efficiently i havent tried to send)
Wifi (nice but not so fast)
Baclight Control
Landscape Support
Phone ( WHEN u accept a call and u find no sound from the ear speaker just press the speaker button two times after u answer ur call)
Browser ( nice )
3D (playing angry birds lite so smoooooooooth)
working 3.5mm jack
SMS
_________________________________________________

Keyboard not working
Hi
I formated the SD-Card, went trough the installation as described, but when it comes to add my Googleaccount I have no way to enter any data since there seams no Softkeyboard installed and also the Hardwarekeyboard does not work.
Any information, how I can proceed?
Regards
agadir9866

unfortunately the buttons dont work after installing

semiran said:
unfortunately the buttons dont work after installing
Click to expand...
Click to collapse
read first post!!!

It seems like you forgot to say that some keyboard application should be downloaded and placed on SD card before taping a script code that you have posted in Emulator, because at the time of first run there is no possibility to tape anything at all (HW keyboard doesn't work without running the script, but the script itself cannot be run without it) Anyway it is useless because there is no way to run Edit command within Gscript, because... HW keys don't work!
Please, correct your first post keeping in mind that HW keys don't work without some doing.
Anyway, it could be a really good thing, it runs so smooth!

so i should copy
Better KB.apk
Ginger KB.apk
Smart KB.apk
SwiftKey KB.apk
to the root of the sd card first before i run haret is that correct?

Here is the guide wich allows you to wake keyboard with 1 click instead of rebooting the device. Guide is for freshly installed android (so no just updating the kernel).
1. Move autostart.sh from the included Folder and place it to your SD card
2. Install android like normal.
Until step 8, keys won't work, except for camera and power button. If you screw up, press camera button to return to the home screen.
3. Launch "Terminal Emulator". Soft keyboard should pop up.
4. Type "su" (everything without quotes from now on). Press enter. Symbol on the left should change to #.
5. Type "mkdir /data/opt" and press Enter.
6. Type "mv /sdcard/autostart.sh /data/opt" and press Enter.
7. Type "chmod 777 /data/opt/autostart.sh" and press Enter.
8. Type "sh /data/opt/autostart.sh" and press Enter. Software keyboard should disappear now and keys should be working.
9.Install application "autostart.apk"
From here, your android is working. If you wish to add 1-click keypad fix, then continue reading ...
10. Install application "GScript Lite".
11. Open GScript Lite.
12. Press left softkey (menu) and select "Add Script".
13. Load (XPEROID Gscript Button restarter script.sh)
14. Press save.
15. Return to the homescreen
16. Hold your thumb to get "Add to home screen" menu.
17. Select Shortcuts --> GScript Lite --> Script that you just created.
And now, each time your keyboard or front keys stops working, simply press camera key and tap on that icon you've just created
P.S.: this is not my work, i have just adapted what users seandean and yaana created. All credits go to them.

ON screen soft keyboard not present?
I can notate that screen keyboard is not present/installed?
And for the keyboard you can connect the phone through adb shell navigate to /sdcard/ and do the next:
chmod 775 autostart.sh
sh autostart.sh
Then you can do the configuration above ;-)

Hi , everything sounds good.
I am going to install / try directly when i am free of work
Most steps are normal steps when installing Android on X1.
However i do not understand what is meant by:
"open terminal emulator then type the following". Could someone explain how to do this (open terminal emulator)?
Is this done when having booted in Android? And if yes, how can i do this
Many MANY thanks in advance.
Willp ost results when i have had the time to test tonight
EDIT: ok tried it....looks VERY smooth, however i cna not get terminal emulator to do naything..
The peeps above are right... no soft Keyboard is present.
Any easy solution to this? (asume i have to install a soft kb first i gues...think i will give that a try.

Well i got this version up and running .
I just installed a software tobo myself and then i went through all the steps required.
Have not yet had much time to check the possibilities and speed.
but first impressions are good
(before this one i had the honeycomb V2 Android running. this one "feels" better.
Wifi: still unstable (on/off at random, like in every build i installed)
Speed: looks VERY good
Battery: hard to say, going to see how long he will be up today.
Charging: Still have to connect in winmo in order to be able to load
Software: Market etc. running very good.
Going to test upcoming time and report in

Hi
I formated the SD-Card, went trough the installation as described, but when it comes to add my Googleaccount I have no way to enter any data since there seams no Softkeyboard installed and also the Hardwarekeyboard does not work.
Any information, how I can proceed?
Regards
agadir9866
Click to expand...
Click to collapse
well sth have gone wrong i thought there is a software keyboard in the rom
ok u can find the app in the 1st post attachement
u have to download the SW keyboard and put it in androidapps folder in ur sd card
for the hardware butons u have to do all the steps accurately
u didn't do this steps
you must do this to make ur button work and to be able to restart it by one press
open terminal emulator then type the following :-(press enter when u write the letters in each line)
Code:
su
mkdir /data/opt
cp /sdcard/autostart.sh /data/opt
chmod 755 /data/opt/autostart.sh
Then install autostart.apk (found in the rom source folder)
When your buttons stop functioning, you have to run a script from GScript that reinstalls the modules so they work once more. Perform these steps:
Install GScript.apk
Open GScript Lite and press <menu> button, then <add script>
Press the <Load file> button.
The script you need is located autmatically and is called "XPEROID Gscript Button restarter script.sh"
Select it and then in the new screen press <Save>
You can now return to your homescreen and add a shortcut to the script so you can reset your buttons easily. To do this do the following:
Press <menu> and then <add> to add widgets.
Select <shortcut> from the list and then locate and select <GScript Lite>
Then select the "XPEROID Gscript Button restarter script" and you now have a shortcut on your homescreen to reset your buttons.
Click to expand...
Click to collapse
____________________

It seems like you forgot to say that some keyboard application should be downloaded and placed on SD card before taping a script code that you have posted in Emulator, because at the time of first run there is no possibility to tape anything at all (HW keyboard doesn't work without running the script, but the script itself cannot be run without it) Anyway it is useless because there is no way to run Edit command within Gscript, because... HW keys don't work!
Please, correct your first post keeping in mind that HW keys don't work without some doing.
Anyway, it could be a really good thing, it runs so smooth!
Click to expand...
Click to collapse
thx dude i edited it

Well i got this version up and running .
I just installed a software tobo myself and then i went through all the steps required.
Have not yet had much time to check the possibilities and speed.
but first impressions are good
(before this one i had the honeycomb V2 Android running. this one "feels" better.
Wifi: still unstable (on/off at random, like in every build i installed)
Speed: looks VERY good
Battery: hard to say, going to see how long he will be up today.
Charging: Still have to connect in winmo in order to be able to load
Software: Market etc. running very good.
Going to test upcoming time and report in
Click to expand...
Click to collapse
thx dude waiting ur feedback

so i should copy
Better KB.apk
Ginger KB.apk
Smart KB.apk
SwiftKey KB.apk
to the root of the sd card first before i run haret is that correct?
Click to expand...
Click to collapse
just copy the kb in attachements to ur androidapps folder in ur sd card

anyone else has trouble with automatic reboots and freezes of this stable rom... :S
had this installed and tried it today, but it rebooted over 10 times already!

Yes, launcherpro doesn't really works properly?
proces android.process.acore
Click to expand...
Click to collapse
and the phone reboots like every 5 min...

anyone else has trouble with automatic reboots and freezes of this stable rom... :S
had this installed and tried it today, but it rebooted over 10 times already!
Click to expand...
Click to collapse
Yes, launcherpro doesn't really works properly?
proces android.process.acore
and the phone reboots like every 5 min...
Click to expand...
Click to collapse
well guys i swear am using this build without any problems it's so smoooth
i haven't experienced this problem so plz make sure u obeyed the instructions and u made the ext2 partition

bob 4ever said:
well guys i swear am using this build without any problems it's so smoooth
i haven't experienced this problem so plz make sure u obeyed the instructions and u made the ext2 partition
Click to expand...
Click to collapse
I really followed the instructions as in the first post, I also made the ext2 partition, so I don't know

plz give it a 2nd try and tell me

Ok, installing again as we speak.. but thats only because it has dutch language support
(ok, ok, ánd because of full launcherpro version
ánd beautifull widgets (even while i dont use the widgets)
but it would be so much perfect if...
- keyboard would be installed on start (since no soft-keyboard is installed by default)
- kernel will be updated to last (Duckly's Kernel [3-9-2011]) (it also contains changelog = No Sleep Of Death)
- maby overclock to 650 Mhz (or is it already overclocked?
- betterterminal ssh would be fixed, or deleted, because both times i installed it didnt work..
(java.io.IOException: Unexpected http status code 404 Expected 200)
Jhonnie's own graphic request:
- auto-install startupcleaner would be banished,
it has a hideous icon in top! Juch! (and it can't uninstall it )
- bootanimation.zip will be changed to gingerbread's one
- why it got the fancy transitions between screens? fast, but may be to kinky.....
(can i disable the transitions in android install??)
Q's:
1.can some1 tell me how i do install drivers for ADB/debug usb?
2.does the android setup (first boot) always crash?
3.if you add autostart to AndroidApps, does it really autostart keyboard drivers,
or is this a one-time install android ever..?

[GUIDE][ICS & HC] How to enable V6 SuperCharger script on Ideapad K1

This guide will show you how to install the V6 SuperCharger script on the Ideapad K1. This script was created by zeppelinrox. I am in no way responsible for any part of this script. This guide is just how I chose to install and configure the script on my K1. Please feel free to experiment with different options, this was meant as a basic setup.
This will work on
Ideapad K1 Honeycomb Rooted 120109 R2 (Must have the R2 update)
http://forum.xda-developers.com/showthread.php?t=1564002
-or-
Ideapad K1 CM9 port
http://forum.xda-developers.com/showthread.php?t=1528775
Before starting please read the entire first post here:
http://forum.xda-developers.com/showthread.php?t=991276
If you like the script make sure you hit "Thanks" on that thread
Keypresses will be in BLUE
Honeycomb specific instructions will be in RED
CM9 specific instructions will be in GREEN
Download the latest version of the V6 SuperCharger script here:
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
If using CM9, download the modified services.jar file and flash via recovery before starting the guide:
http://goo.im/devs/khanning/k1/modded_services-jar_K1_CM9_ALPHA-1.6.zip
1.
If using adb
Code:
adb remount
adb push V6_SuperCharger_for_Android-Update9_RC8.2.sh /system/xbin
adb shell
If using a terminal emulator
Code:
su
mount -o rw,remount /system
mv /sdcard/Download/V6_SuperCharger_for_Android-Update9_RC8.2.sh /system/xbin
2.
Code:
chmod 755 /system/xbin/V6*
3.
Code:
/system/xbin/V6*
--
Is Home is Locked in Memory?
If it is, Enter Y for Yes, any key for No...
Just say "No" if you don't know: [ENTER]
--
Press the Enter Key... and Come Get Some!! [ENTER]
--
Scrolling Speed Options...
==========================
1 (fast), 2 (normal), 3 (slow)
Please select scrolling speed (1 - 3): I chose 2 here, but you can select any [2] [ENTER]
--
Do you want to use Build.prop...
...or create /data/local.prop?
Enter (B)uild.prop or any key for local.prop: [ENTER]
--
Run Fix Emissions on boot?
Enter N for No, any key for Yes: [ENTER]
--
Press The Enter Key... [ENTER]
--
Integrate? Enter Y for Yes, any key for No: [y] [ENTER]
--
Enter Y for Yes, any key for No: You decide, this is the V6 SuperCharger animation when you run the script
--
...Press the Return or Any Key: [ENTER]
--
Apply SuperMinFree Calculator Settings?
Enter Y for Yes, any key for No: [y] [ENTER]
--
Press The Enter Key... [ENTER]
--
================================================
...SuperClean & ReStart!
================================================
Press The Enter Key... [ENTER]
--
Do you want to SuperClean & ReStart now?
Enter Y for Yes, any key for No: If your using Honeycomb you MUST follow the step below before saying yes here. [y] [ENTER]
FOR HONEYCOMB
if using adb
Open another terminal window and run
Code:
adb shell rm -r /data/firstboot
if using a terminal emulator
Open another terminal tab by tapping the "+" in the top right corner and run
Code:
su
rm -r /data/firstboot
Now go back to the first terminal window and press [y] [ENTER] to run SuperClean and reboot
Click to expand...
Click to collapse
Thats it!! The V6 SuperCharger script should now be enabled.
To check that it's running:
The script sleeps for 90 seconds before it starts the service so make sure the system has been fully loaded for at least 90 seconds.
1.
Code:
adb shell
or
open a terminal emulator then
Code:
su
2.
Code:
/system/xbin/V6*
--
Is Home is Locked in Memory?
If it is, Enter Y for Yes, any key for No...
Just say "No" if you don't know: [ENTER]
--
Press the Enter Key... and Come Get Some!! [ENTER]
Click to expand...
Click to collapse
3. Now make sure you see:
================================================
SuperCharger Level: 100% SuperCharged!
================================================
If so, your all set. If not, smack your face against the keyboard and come join me in freenode IRC room #ideapad-k1
Thanks to zeppelinrox for creating the V6 SuperCharger script. Please be sure to hit "Thanks" at this thread if you like his work.

Can you notice a difference? It was debatable if it helped on the Nook Color, how's it look on the K1 with much better hardware.

Thanks a lot....I just ****ed up my K1 with this **** a second time.
I did stick 100% to your directions....all went fine till the reboot...and then I get thousands of force closes....cant do anything.
I did it the original way in the v6 topic.
I did it your way.
Edit:
Damn I forgot this:
FOR HONEYCOMB
if using adb
Open another terminal window and run
Code:
adb shell rm -r /data/firstboot
if using a terminal emulator
Open another terminal tab by tapping the "+" in the top right corner and run
Code:
su
rm -r /data/firstboot
Now go back to the first terminal window and press [y] [ENTER] to run SuperClean and reboot
---------- Post added at 11:21 PM ---------- Previous post was at 10:41 PM ----------
Update:
thanks it runs....the last part was the problem....will test over the weekend.

Does this really work? That original thread reads (and looks) like an infomercial, LOL. Does your Google Play Store still work properly afterwards?
I installed RAM Manager Pro on mine and was using it for a little while, but then I started noticing that I couldn't update any of my apps through the Play Store. They would constantly say "Downloading..." and nothing would happen. They never got to a KB download counter. When I uninstalled RAM Manager Pro, app updates started working again for me.

ssl123 said:
Does this really work? That original thread reads (and looks) like an infomercial, LOL. Does your Google Play Store still work properly afterwards?
I installed RAM Manager Pro on mine and was using it for a little while, but then I started noticing that I couldn't update any of my apps through the Play Store. They would constantly say "Downloading..." and nothing would happen. They never got to a KB download counter. When I uninstalled RAM Manager Pro, app updates started working again for me.
Click to expand...
Click to collapse
Yes, it works fine. I just installed 1 app and updated a bunch
send by K1

It works. I also just updated some apps and installed a new game from play store (yes I did force the update). Firefox runs faster. Everything "feels" more fluid.
sent from my Ideapad K1 with Tapatalk v2

Twist79 said:
Firefox runs faster. Everything "feels" more fluid.
Click to expand...
Click to collapse
Thanks for the info and thank you Khanning for everything you've done to make the K1 a better device!

Makes a great differance even with rooted HC rom which is already very stable and fast.... Thanks KHanning

[Q] v6 supercharger

hi frnds how to use v6 supercharger script i tried but it shows normal ram memory 60.
k explain what i do
* Open script manager
* Click on v6_Supercharger_for_android-update**.pdf, a new window will appear just click on su(icon will now be green) and press Run
* Superuser request will come, press allow
* Now a lot of stuff will be written, at first you just have to press enter
* If you are smart enough you won't choose anything wrong, so go on until you see : Please Enter Option (1-31) --> you choose(write): 10
* Few moments later this will appear: Apply SuperMinFree Calculator Settings? --> you choose no (write: n )
* Now you'll see ,,Running Cust-OOMizer..'' and slot 1 will appear. Enter these values:
- Slot 1: 6
- Slot 2: 18
- Slot 3: 5
- Slot 4: 50
- Slot 5: 60
- Slot 6: 70
after that just press enter and wait
* When you see this: ,,Because I may SNAP and call you names! ;-] ''
but it does nt increase my ram memory ...plz help me
i used
rom-GINGERDX v 031b
kernel-Alfs

vardhan21 said:
hi frnds how to use v6 supercharger script i tried but it shows normal ram memory 60.
k explain what i do
* Open script manager
* Click on v6_Supercharger_for_android-update**.pdf, a new window will appear just click on su(icon will now be green) and press Run
* Superuser request will come, press allow
* Now a lot of stuff will be written, at first you just have to press enter
* If you are smart enough you won't choose anything wrong, so go on until you see : Please Enter Option (1-31) --> you choose(write): 10
* Few moments later this will appear: Apply SuperMinFree Calculator Settings? --> you choose no (write: n )
* Now you'll see ,,Running Cust-OOMizer..'' and slot 1 will appear. Enter these values:
- Slot 1: 6
- Slot 2: 18
- Slot 3: 5
- Slot 4: 50
- Slot 5: 60
- Slot 6: 70
after that just press enter and wait
* When you see this: ,,Because I may SNAP and call you names! ;-] ''
but it does nt increase my ram memory ...plz help me
i used
rom-GINGERDX v 031b
kernel-Alfs
Click to expand...
Click to collapse
1-download latest script
2-run v6supercharger.sh as root(not pdf file!)
It'll ask 3 or 4 questions & then you're done
3-reboot
Sent from my E15i using Tapatalk 2

vardhan21 said:
hi frnds how to use v6 supercharger script i tried but it shows normal ram memory 60.
k explain what i do
* Open script manager
* Click on v6_Supercharger_for_android-update**.pdf, a new window will appear just click on su(icon will now be green) and press Run
* Superuser request will come, press allow
* Now a lot of stuff will be written, at first you just have to press enter
* If you are smart enough you won't choose anything wrong, so go on until you see : Please Enter Option (1-31) --> you choose(write): 10
* Few moments later this will appear: Apply SuperMinFree Calculator Settings? --> you choose no (write: n )
* Now you'll see ,,Running Cust-OOMizer..'' and slot 1 will appear. Enter these values:
- Slot 1: 6
- Slot 2: 18
- Slot 3: 5
- Slot 4: 50
- Slot 5: 60
- Slot 6: 70
after that just press enter and wait
* When you see this: ,,Because I may SNAP and call you names! ;-] ''
but it does nt increase my ram memory ...plz help me
i used
rom-GINGERDX v 031b
kernel-Alfs
Click to expand...
Click to collapse
Use your brain & read OP of supercharger thread:banghead:
Sent from my X8

im using miniCM 2.0.7 stock kernel, can i apply this v6 supercharger?

@ Vardhan21
V6 supercharger wont increase your RAM!!!
RAM is a physical memory and cannot be increased by some scripts.
These scripts optimize the memory so that your RAM will be better managed by Android.
@ astig_king24
You can use v6 supercharger with any rom and any phone
Sent from my X8 using xda app-developers app

Enhance L7

I want to write this post to speak about my experience with l7 of my girlfriend. In this moment her l7 is fast and nice.
What I did?
Install v20a by homero: http://forum.xda-developers.com/showthread.php?t=2214717
Make format (restore settings) by setting of the phone
Wait that phone reboot and set correct language and make first access
Go in to cwm recovery (with android terminal emulator write: su , click enter, write reboot recovery , click enter) and make wipe data, wipe cache and advanced-wipe dalvik cache
If initial android settings appears again (because "wipe data") choose correct language and make first access
Now install 20b rooted http://forum.xda-developers.com/showthread.php?t=2239786 (I install 20a before because it has more language; but if you update 20b over 20a you don't lose choosed language also if it isn't present in 20b)
Install root explorer to make some changes
From system/app delete browser (I suggest to install dolphin mini e set desktop mode user agent) ,youtube (you can install from play store and don't have in system) and weather (I use beautiful widget) ; if you have maps, gmail, polaris office, delete them and download and install from play store (or you can copy and paste them in sdcard, delete from system and reinstall); I use quickpic as gallery and mx player as video player
From notification bar you can edit and unflag in QSlide options "Calendar" because doesn't work; for browser(deleted before) is not a problem, because after reboot it will not appear more
I install seeder 1.4 to reduce lag: http://forum.xda-developers.com/showthread.php?t=2237776 , open, enable rng and set "start automatically on boot"
I install v6 supercharger in this manner: download this http://www.mediafire.com/?8ei5qbzy5s0bp68, unzip and copy in sdcard.
From android terminal emulator digit su , click enter, digit sh sdcard/SuperCharger_Starter_Kit/StartMeUp.sh , click enter. Choose YES to different options.
After download http://www.mediafire.com/?sdytjb056bje98a , install lg drivers if you don't have, choose debugUsb from developer options, connect phone in "charge only" mode. Start downloaded exe file from your pc and press enter when it asks; when it ask about "adb", choose "No".Follow steps (choose die(D) for kernel mode if it ask, 1 for scrolling if it ask) and click YES to others;when a superSU popup will appear in your phone, click OK (phone will restart); go until ask about multitask mod (choose No, so process will end).
Copy this in sdcard http://www.mediafire.com/view/?ngomnmpbs3ya9ol and from android terminal emulator write su ,click enter, write sh sdcard/99SuperCharger.sh , click enter.
Will start superchanger configuration; choose "YEs" to different option (1 for scrolling if it ask, die(D) for kernel mode if it ask);when you can choose option from 1-33 choose 5. After finish, close terminal emulator.
With script manager (browser as root if it ask) go in data/99SuperCharger.sh and press su, boot and save
Install kickasskernelizer: http://www.mediafire.com/view/?4zf6hbko51gf8nh .As v6 supercharger, copy in sdcard, from terminal emulator write su , press enter, write sh sdcard/S98KickAssKernelizer.sh , press enter.
Choose K (kernelizer) and choose yes for IO scheduler tweeks. With script manager (browser as root if it ask) go in data/S98KickAssKernelizer.sh and press su, boot and save
Enable hardware acceleration: http://forum.xda-developers.com/showthread.php?t=2231523
Install rambooster and for the first time open and make boost now (will appear on the top a red icon, so when you want free ram you tap there)
Reboot phone and wait scanning of storage
Yout phone will be fast and updated

simply.. install cm10 with oc kernel and seeder
That is it

CM10 has working camera? All hardware working fine? thanks
how ever someone can prefer "LG style" over CM10 UI, like my girlfrind

CM10 camera is working great on my L7. The only thing is that it saves the pictures in the internal memory, and I cannot configure it to save on SD card.
No hardware problem, but if you are on V20 you need to flash V10 bootloader to make radio and wifi work. Did that and works great.
The only issue with CM10 seems to be the random reboot. Some say it no longer occurs with V6 supercharger's hard rock kernel. Had mine supercharged 50% and still occurs. Since yesterday it's 100% supercharged and haven't got any reboots but to be fair the phone was not used too much, just a couple of phone calls and some facebook.

In cm10 you can't configure storage of camera
You can't run radio tm
You can't play all vedio extensions
You can't record at background
Sent from my LG-P700 using xda premium

Have you successfully run the fm radio m
Sent from my LG-P700 using xda app-developers app

mine worked smoothly with V6 and crossbreader, even in the crappy carrier rom (is the only one for p708g )

fenomeno83 said:
I want to write this post to speak about my experience with l7 of my girlfriend. In this moment her l7 is fast and nice.
What I did?
Install v20a by homero: http://forum.xda-developers.com/showthread.php?t=2214717
Make format (restore settings) by setting of the phone
Wait that phone reboot and set correct language and make first access
Go in to cwm recovery (with android terminal emulator write: su , click enter, write reboot recovery , click enter) and make wipe data, wipe cache and advanced-wipe dalvik cache
If initial android settings appears again (because "wipe data") choose correct language and make first access
Now install 20b rooted http://forum.xda-developers.com/showthread.php?t=2239786 (I install 20a before because it has more language; but if you update 20b over 20a you don't lose choosed language also if it isn't present in 20b)
Install root explorer to make some changes
From system/app delete browser (I suggest to install dolphin mini e set desktop mode user agent) ,youtube (you can install from play store and don't have in system) and weather (I use beautiful widget) ; if you have maps, gmail, polaris office, delete them and download and install from play store (or you can copy and paste them in sdcard, delete from system and reinstall); I use quickpic as gallery and mx player as video player
From notification bar you can edit and unflag in QSlide options "Calendar" because doesn't work; for browser(deleted before) is not a problem, because after reboot it will not appear more
I install seeder 1.4 to reduce lag: http://forum.xda-developers.com/showthread.php?t=2237776 , open, enable rng and set "start automatically on boot"
I install v6 supercharger in this manner: download this http://www.mediafire.com/?8ei5qbzy5s0bp68, unzip and copy in sdcard.
From android terminal emulator digit su , click enter, digit sh sdcard/SuperCharger_Starter_Kit/StartMeUp.sh , click enter. Choose YES to different options.
After download http://www.mediafire.com/?sdytjb056bje98a , install lg drivers if you don't have, choose debugUsb from developer options, connect phone in "charge only" mode. Start downloaded exe file from your pc and press enter when it asks; when it ask about "adb", choose "No".Follow steps (choose die(D) for kernel mode if it ask, 1 for scrolling if it ask) and click YES to others;when a superSU popup will appear in your phone, click OK (phone will restart); go until ask about multitask mod (choose No, so process will end).
Copy this in sdcard http://www.mediafire.com/view/?ngomnmpbs3ya9ol and from android terminal emulator write su ,click enter, write sh sdcard/99SuperCharger.sh , click enter.
Will start superchanger configuration; choose "YEs" to different option (1 for scrolling if it ask, die(D) for kernel mode if it ask);when you can choose option from 1-33 choose 5. After finish, close terminal emulator.
With script manager (browser as root if it ask) go in data/99SuperCharger.sh and press su, boot and save
Install kickasskernelizer: http://www.mediafire.com/view/?4zf6hbko51gf8nh .As v6 supercharger, copy in sdcard, from terminal emulator write su , press enter, write sh sdcard/S98KickAssKernelizer.sh , press enter.
Choose K (kernelizer) and choose yes for IO scheduler tweeks. With script manager (browser as root if it ask) go in data/S98KickAssKernelizer.sh and press su, boot and save
Enable hardware acceleration: http://forum.xda-developers.com/showthread.php?t=2231523
Install rambooster and for the first time open and make boost now (will appear on the top a red icon, so when you want free ram you tap there)
Reboot phone and wait scanning of storage
Yout phone will be fast and updated
Click to expand...
Click to collapse
Sir, whenever I enter the 'digit su' it would always say '/system/bin/sh: digit: not found'
How can I fix this? Please Help. Thanks.

cloud26 said:
Sir, whenever I enter the 'digit su' it would always say '/system/bin/sh: digit: not found'
How can I fix this? Please Help. Thanks.
Click to expand...
Click to collapse
Just type "su"..