Hello folks,
First I must say that before I post this thread I searched for days to find out a solution, I tried everything I know about to fix my issue without luck.
What happened:
I was on cyanogenmod 10.1.2 (4.2.2) with semaphore kernel 3.0 everything running flawless for month nothing much to say.
I dismounted my external SDcard 16go to switch for another one 32go while the phone was on (I did this multiples times before without issues) but when I mounted it back I had a "searching for error" notification so I waited for a time and my phone gone off alone.
I power it on back but my screen just show "Galaxy S I9000" logo and nothing else happen. So I waited for a time, removed the battery, and power it on again but no luck, my phone seems to have a bootloop I thought.
I decided to flash back to stock rom in order to fix it (I did this before when I got bootloop with froyo, gingerbread, ics ... good old day )
My phone is an international I9000 PRO (belgium)
I flashed a XXJVU stock rom with repartition on PIT 512(because of different partition format from cyanogenmod) with ODIN, everything is running fine from ODIN, no errors, the phone reboot but still no luck : stuck with the Galaxy S I9000 screen, nothing else happen.
I can get download mode but no recovery mode, so I tried to flash a semaphore ICS kernel: no luck again, no recovery available.
I started to get worried and tried everything possible from http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
Still no luck my phone is stuck to this Galaxy S I9000 screen. I can't get recovery mode, only download mode.
I flashed another stock rom :GT_I9000_XWJW5_XDJV1_OXXJVC_Sbl because of the sbl as I thought my boot partition was screwed but still no luck, no boot past the Galaxy S I9000 screen.
I just have the download mode available that is all.
My battery is at 100%
ODIN flash without any errors
What can I do in order to fix it? and if I can't, can I try to save my internal SDcard documents (photos, pdf, doc ...)? Can I mount my internal SDcard from download mode to fix this loop? or to save my important documents?
I am sorry for my basic english, I thank you in advance to anyone who try to help me.
Negatho said:
H
I dismounted my external SDcard 16go to switch for another one 32go while the phone was on (I did this multiples times before without issues) but when I mounted it back I had a "searching for error" notification so I waited for a time and my phone gone off alone. .
Click to expand...
Click to collapse
Remove your External SD card and try, could be wrong format, as it needs to be formatted in phone first.
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
I've already did that in the first time.
Now I retired everything from the phone (sim card and SDcard) to flash a stock rom in order to fix this bootloop but still no luck.
I couldn't pass that Galaxy S I9000 screen, nothing happen.
I don't have any recovery mode available now, only download mode.
When I flash a stock rom (I tried JVU, JW5 full stock) ODIN says nothing wrong, everything seems to go fine, but the phone is stuck at start screen.
Negatho said:
I've already did that in the first time.
Now I retired everything from the phone (sim card and SDcard) to flash a stock rom in order to fix this bootloop but still no luck.
I couldn't pass that Galaxy S I9000 screen, nothing happen.
I don't have any recovery mode available now, only download mode.
When I flash a stock rom (I tried JVU, JW5 full stock) ODIN says nothing wrong, everything seems to go fine, but the phone is stuck at start screen.
Click to expand...
Click to collapse
follow this guide to flash the JVU with PIT
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
I did follow your guide (pretty nice guide by the way)
Here is my ODIN output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> cache.rfs
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
The phone reboot but still stuck at Galaxy S GT-I9000 screen. I still don't have a recovery mode, only download mode available.
I couldn't flash a CF-Root kernel because the first flash did not complete the first run (I guess) and even if I flash a CF-Root kernel (jvu, I tried it before) I still don't have a recovery mode.
I feel so sad, maybe my internal SD is screwed ... I had this phone since 3 years, did alot of flash before, got it bricked, saved it multiple times without any issue, strong device but now I think it's done, the end
Now, if you know a way to read the internal SD without recovery mode you are a god
I think I will give up.
Negatho said:
I feel so sad, maybe my internal SD is screwed ... .
Click to expand...
Click to collapse
well, you can always use external SD card, when your internal SD card is fried...just read this and related links in it , first to digest the issue and try when you are SURE how you would proceed, the easiest is having a single SD card partitioned into two to act like its the internal and external.
The problem here seems you had made a swap, and that needs to be undone
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Related
guyz..i have a big problem right now..my NOte is on LA1..so to root it..i must
downgrade it first right?so i use the mobile odin and downgarde it to KK1...so after
following the procedure..after all been set up..i hit start...then i wait for about 1
hours..suddenly the box became red n said failed...i try to restart my phone then
there goes the message said firmware upgrade encounter an issue and ask me to
recovery mode using kies..how do i settle this problem guys...been searching for
hours how to overcome it..hope u guys can help me..me very newbies on
android..thanx in advance..
Press vol.down + home button + power. This will take you to download mode. Then flash a stock Rom using pc odin
Sent from my GT-N7000 using xda premium
thanx for the fast reply..thats what im doing now...past 1 hour already..my device got stuck at this since then.....
<ID:0/028> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXLA1_N7000OLBKL2_N7000DXKL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> cache.img
<ID:0/028> NAND Write Start!!
<ID:0/028> factoryfs.img
whats wrong???
you need root so you have downgrade it with mobile odin???
You wr not rooted how you have used mobile odin?
Sent from my GT-N7000 using xda premium
Try a different stock Rom
Sent from my GT-N7000 using xda premium
dr.ketan...i've read the post that said newer kernel cant be root unless it's been downgrade...mine is la1..so i download the file of kk1 to downgrade my note..im not using mobile odin(my bad..wrongly describe)...im using pc odin
Then its ok
Read your first post, it is confusing
Anyway juat check your pc, have kies installed but not running in nackground, close any other pc sync sw running, disable firewall/antivirus if running
Put once device into recovert, clear cahe , delvic cache, wipe data
N retry, i believe problem is at your pc side.
Sent from my GT-N7000 using xda premium
right now my phone cant go into recovery mode...just download mode...its keeps showing the triangle icon(yellow) between phone n pc...rite now downloading another stock rom file...trying to do what indie suggested....
p/s-recovery mode=push volume up+home+power rite?i tried it...can't get in to recovery mode....T_T
Ya right way to get recovery
if not success just try another pc
Gudluck
Sent from my GT-N7000 using xda premium
please ...i have same porblem on my note ,,when upgrading using odin i have a massege FACTORYFS ,,and then HIDDEN and at las FAIL!! can u help me ..
@ brother,,,
flash to stock rom N7000XXKKA_N7000OXXKK5_AUT.zip
i got success flashing..
i have same problem in my note using pc odin hang in hidden option show, plz adv thnk for valuable advice urgent
Same problem
I having this same issue... Done what you did with no avail.. Just sent it in to samsung service centre.. They say will take a couple of days.. I lied, told them I woke up in the morning note couldn't switch on , took out battery and replace now ended this way.. Will wait for their call soon....
same problem here. tried to flash with a downgraded rom to root and now i get the yellow triangle.
tried flashing with pc odin and i get this
"<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> zImage
<ID:0/010> NAND Write Start!!
<ID:0/010> boot.bin
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?
select USB debugging ON (setting - Application - development)
then connect to PC n Check your device manager(my computer - Rt click - property - device manager)
Is samsung device connected correctly( shouldn't have yellow mark)
refer this image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If not connected correctly n having yellow mark, Reinstall drivers from here
If your OS is 32bit or 64bits
- connect your device to direct mainboard USB slot(back side pc) n without any extension cable
-Close any antivirus running
-close kies
hey ketan...i cant activate usb debugging as my phone wont boot anything.. just get the samsung galaxy note writting with yellow triangle.
ill try installing drivers again
---------- Post added at 06:21 PM ---------- Previous post was at 06:19 PM ----------
ive managed to install CF-Root-SGN_XX_SER_LA6-v5.0-CWM5 as my phone is LA6.. then i go to install a rom and it fails!
---------- Post added at 06:24 PM ---------- Previous post was at 06:21 PM ----------
yes device is fine in device manager "Samsung Mobile USB CDC Composite Device" No yellow triangles!
Have you try to install any Custom Kernel (CF root or any) with PC Odin?? Otherwise yellow triangle shoudn't appear
Go to recovery (vol up +Home+ power), wipe cache
If still errr wipe data
then restart
Still error reflash
origionaly i tried to downgrade the rom so i could root it. i ried what you said but i cant seem to get any option to wipe data and clear cache!
Press vol up + home + power
When screen appear, release power n keep holding rest of two buttons
You will enter in recovery n able to see wipe cache n wipe data option
Sent from my GT-N7000 using xda premium
cant seem to get it to show up, i dont have CWM installed otherwise i would use that to do it.! any suggestions
I know that this is probably another post in a series of desperate to get back to ICS for GB, but please understand me, I did not want to get my phone is a brick
I used the CheckROM NoteHD ™ V6. I tried to go to Criskelo LPY V3's ICS ICS. I restarted my phone into recovery and I flash: AbyssNotekernel42RedTouchCustomLogo.zip
Then I reboot and recovery (the recovery RedTouch) I did factory reset, wipe and wipe cahce Dalvik cache and then and flash Criskelo LPY V3's ICS ICS. When the flash ended (I did not have any information about errors) successfully I restarted my phone. My phone Restarted a few times and finally started to Criskelo's ICS ICS LPY V3.
But I wanted to return to the previous rom. Perhaps I did wrong, but I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip (I thought that this way I can upload my copy of the rom GB) .... but after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3
Just notice another problem, not sure if it is when I tried binary updating SU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screen was made by another user, but for me it is exactly the same.
Everything indicates that I have root - titanium works and I can copy and delete any file in the system
Now the question:
How should I go back to GB (whether it is better not to do it?). Please help me what should I do step by step?
Don't panic mate!
Go into Recovery
Flash abyss 4.2 or Franco 10
FULL WIPE (factory reset,cache,davnik cache)
Restore backup or even better Flash a clean GB ROM
Edit: of course you can use PC Odin in download mode and flash a pre-rooted GB From.
Sent from my GT-N7000 using Tapatalk 2
sotiris20 said:
Don't panic mate!
Go into Recovery
Flash abyss 4.2 or Franco 10
FULL WIPE (factory reset,cache,davnik cache)
Restore backup or even better Flash a clean GB ROM
Edit: of course you can use PC Odin in download mode and flash a pre-rooted GB From.
Click to expand...
Click to collapse
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
kamilloo83 said:
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
Click to expand...
Click to collapse
Its not the "wrong way".Flash a clean Rom now,not your backup. Maybe your backup file is corrupted. If you want try Pc-Odin as I said before. Your choice...
Anyway, hope you'll figure it out.
Sent from my GT-N7000 using Tapatalk 2
OK I trust you
Will it be ok as I flash in PC ODIN from:
http://forum.xda-developers.com/showthread.php?t=1424997
it:
Older ROMs (Directly Rootable)
N7000XXKKA ------ 2.3.6 2011 November------- N7000PLSKK1 -----------------Poland (PLUS) ----------------------- Download
and next I'll be root, and I will be able to upload the recovery CheckROM NoteHD ™ V6
kamilloo83 said:
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
Click to expand...
Click to collapse
After flashing the AbyssNotekernel42RedTouchCustomLogo.zip you rebooting the phone or rebooting the recovery ?
abhisahara said:
After flashing the AbyssNotekernel42RedTouchCustomLogo.zip you rebooting the phone or rebooting the recovery ?
Click to expand...
Click to collapse
not because the flash: AbyssNotekernel42RedTouchCustomLogo.zip is not succesfully -> my phone freezes during this operation, and then restarts
addition, one user wrote:
Entropy512 said:
Don't flash a GB kernel from recovery! Odin/Heimdall it! If you are unable to flash kernels with Odin/Heimdall, you may be suffering from eMMC damage.
Click to expand...
Click to collapse
I sincerely fear you may have the dreaded Superbrick mate. All the symptoms are there.
He can still ODIN, right? I haven't read where he said he can't access download mode. He was just trying to do stuff in recovery. Can we confirm you can not access download mode either?
chasmodo said:
I sincerely fear you may have the dreaded Superbrick mate. All the symptoms are there.
Click to expand...
Click to collapse
I am afraid that most
What do you think should I do to try to flash with the hope of GB?
andreww88 said:
He can still ODIN, right? I haven't read where he said he can't access download mode. He was just trying to do stuff in recovery. Can we confirm you can not access download mode either?
Click to expand...
Click to collapse
you're right, I have not written anywhere that I can not enter download mode .. but have not tried ... charge the phone at the moment - in the evening I'll be ready ....
or should I do as I wrote above - this example ROM, and my description is OK?
kamilloo83 said:
you're right, I have not written anywhere that I can not enter download mode .. but have not tried ... charge the phone at the moment - in the evening I'll be ready ....
or should I do as I wrote above - this example ROM, and my description is OK?
Click to expand...
Click to collapse
Okay cool, that's fairly good news because if you CAN enter download mode you are not bricked and you can ODIN a pre-rooted GB rom or a stock GB rom. If your phone will charge, let it charge up and then ODIN away.
andreww88 said:
Okay cool, that's fairly good news because if you CAN enter download mode you are not bricked and you can ODIN a pre-rooted GB rom or a stock GB rom. If your phone will charge, let it charge up and then ODIN away.
Click to expand...
Click to collapse
ufff... I hope...
ask again:
Will it be ok as I flash in PC ODIN from:
http://forum.xda-developers.com/show....php?t=1424997
it:
Older ROMs (Directly Rootable)
N7000XXKKA ------ 2.3.6 2011 November------- N7000PLSKK1 -----------------Poland (PLUS) ----------------------- Download
and next I'll be root, and I will be able to upload the recovery CheckROM NoteHD ™ V6 ??? ....
Yes, that is thread you need to follow.
You can root by following Dr.Ketan's steps too.
OPERATION FAIL:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WHAT IS WRONG?
kamilloo83 said:
OPERATION FAIL:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WHAT IS WRONG?
Click to expand...
Click to collapse
Not sure. Can you try another ROM file on that thread? That doesn't look promising, but maybe someone else can help that knows more.
andreww88 said:
Not sure. Can you try another ROM file on that thread? That doesn't look promising, but maybe someone else can help that knows more.
Click to expand...
Click to collapse
I must download anotheher ROM... one moment...
kamilloo83 said:
I must download anotheher ROM... one moment...
Click to expand...
Click to collapse
Maybe even try LPF ICS?
It might just have been a bad download, but the MD5 checked good it looks like so I don't know. I'd like someone else to say something to try to help.
Try repartitioning the device. To do so use simply set the right pit file in odin.
rupalazzi said:
Try repartitioning the device. To do so use simply set the right pit file in odin.
Click to expand...
Click to collapse
can I use it with ROM: N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5
together in PC ODIN?
I tried to restore my SGN image using CWM but after the phone boot, it just stuck at welcome screen. After a long wait, I decided to reflash my rom.
When I tried to flash the ROM, it just stuck at
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXLP9_N7000OLBLP6_N7000DXLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> cache.img
<ID:0/012> NAND Write Start!!
<ID:0/012> factoryfs.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried using ICS and GB. Same result. If I'm going into Recovery Mode, this error come out.
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Help me please..
Please tell me you were not on ics when you tried to restore using cwm?
Sent from my GT-N7000 using xda premium
I'm on ICS. Even the image that I want to restore also on ICS as well.
Last time I try, I received this error
<ID:0/018> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXLP9_N7000OLBLP6_N7000DXLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> cache.img
<ID:0/018> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can't someone make somthing like this for the Samsung GT-N7000, Samsung I9220?http://forum.xda-developers.com/archive/index.php/t-1506330.html
Where you on the stock ics kernal?
Try downloading and flashing a pre rooted gb rom http://forum.xda-developers.com/showthread.php?t=1535025 in PC ODIN.
Preferably the whipe version.
carbonassassin said:
Where you on the stock ics kernal?
Click to expand...
Click to collapse
I'm not sure but I'm using stock ROM
rilpromen said:
Try downloading and flashing a pre rooted gb rom http://forum.xda-developers.com/showthread.php?t=1535025 in PC ODIN.
Preferably the whipe version.
Click to expand...
Click to collapse
Let me try.
You can back-up and wipe cache and dalvik cache with any kernel. Full wipe and restore should be done only with abyss kernel.
J3batDerhaka said:
I'm not sure but I'm using stock ROM
Let me try.
Click to expand...
Click to collapse
There's a chance you may have corrupted you emmc, read up about the emmc hard brick bug NOW before you do anything else
Sent from my GT-N700 running LiquidSmooth and Carbon Tweaks
rilpromen said:
Try downloading and flashing a pre rooted gb rom http://forum.xda-developers.com/showthread.php?t=1535025 in PC ODIN.
Preferably the whipe version.
Click to expand...
Click to collapse
failed.
carbonassassin said:
There's a chance you may have corrupted you emmc, read up about the emmc hard brick bug NOW before you do anything else
Sent from my GT-N700 running LiquidSmooth and Carbon Tweaks
Click to expand...
Click to collapse
where do i find article about emmc hard brick bug? i tried to find it in XDA but couldn't find it.
Read here about brickbug...
http://forum.xda-developers.com/showthread.php?t=1659768
Theres also a thread on repartitioning the data partition to bypass any corrupted sectors mentioned in that thread.
Sent from my GT-N7000 using xda premium
tqvm..
sorry. my english not so good. so, i quite lost and couldn't understand.
Basically, theres a bug in most ics kernels that will corrupt your data memory to the point where the only way to fix it is to return your device to samsung for a motherboard replacement... Or you can repartition the chip so you miss out the bad memory sectors, usually you'll lose about 3 or 4gb of space.
The only way to tell if this has happened will be to flash a stock gb rom and kernel using pc odin, check dr. Ketans thread in the stickies of rom development section to get a gb rom. If that still gets stuck at factoryfs.img then its likely youre bricked and will need to get your warranty replacement.
Dont do any more wipes or restores while on ics!!!
Sent from my GT-N7000 using xda premium
Heres another thread on brickbug...
http://forum.xda-developers.com/showthread.php?t=1633938
Sent from my GT-N7000 using xda premium
wah!! TQ for the explanation. After I tried to installed GB, it still stuck at factoryfs.img. Maybe I need to send my phone to Samsung.
Try connecting the usb cable directly in one of the ports in the back of the pc (directly in the motherboard) then try reflashing.
Me too
stuck
went from stock ics kernel via mobile odin ever root.
tried to change to mid rom (previously been on)
cwm install zip abyss kernel
restore midteam1.4.2
copies a lot of files ok
says can't restore /system!
sometimes says can't restore /data!
still have cwm
availably working is
cwm
abyss red touch thing
(I've already tried format /data -as it was already fubared- seems fine no error echo, obviously not fix)
pc odin
likewise mine gets stuck completely as previously described.
how do we send to samsung? how much cost?
rilpromen said:
Try connecting the usb cable directly in one of the ports in the back of the pc (directly in the motherboard) then try reflashing.
Click to expand...
Click to collapse
I tried to every USB port at my PC and notebook. Still not working.
quatzar said:
Me too
stuck
went from stock ics kernel via mobile odin ever root.
tried to change to mid rom (previously been on)
cwm install zip abyss kernel
restore midteam1.4.2
copies a lot of files ok
says can't restore /system!
sometimes says can't restore /data!
still have cwm
availably working is
cwm
abyss red touch thing
(I've already tried format /data -as it was already fubared- seems fine no error echo, obviously not fix)
pc odin
likewise mine gets stuck completely as previously described.
how do we send to samsung? how much cost?
Click to expand...
Click to collapse
Where are you from? I'm not so sure in Malaysia do they care about rooting or not because my experience, I sent rooted Galaxy Tab to Samsung and they just fix the device FOC within warranty period. I'm going to send my SGN by this week.
Hi Everyone
VIDEO:
https://www.youtube.com/watch?v=94vIeinaddQ
i will show you how to root the Samsung galaxy mini 2 S6500D
and i will move step by step in this tut as i will Root my device as well, I've Unrooted it so i can show you every step
ok, so first of all there is some files that you need to download first:
1- you must have the ADB drivers for your phone and you do that by downloading Samsung kies
just google it and you will find it
2- download this rar file here
Ok so lets get started
- After Downloading Samsung Kies connect your Phone to the pc so the Kies can detect it and install its drivers.
- grab your phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
( its really advisable to be fully charged, or at least 90% or so ) things can get really bad if the phone turns off while rooting :silly:
- Trun off the phone,Boot your phone in ( Download mode ) you can do that by pressing Vol (down) and Home and power key all at once, after that you should get to this screen:
just press the volume up to ignore the warning To proceed.
Then connect your phone to the pc and open Odin3 v1.85.exe from the rar(mini2.rar) that you downloaded and extracted
then press the PDA button and choose the other file called ( clockworkmod-5.0.2.8.tar.md5 )
ok, before we continue you should take care of something
if you get Exactly this screen, then you did something wrong
as you see in the rec circle Odin did NOT detect your phone
-its either not connected probably or its drivers is not installed
so make sure you check both of these things
now if you get THIS screen with Oding detecting your phone then you are ready to go
press the PDA button and load the file called ( clockworkmod-5.0.2.8.tar.md5 )
then press start,If you see pass with green background make sure you did it right
after that CLOSE, you must COLSE odin, just exit it.
Now turn off your phone again and boot it in ( REcovery mode ) you can do this by pressing both of the volume buttons and the home and power key, so basically you just press all the buttons at the same time.
as you see it will say GT7500 but its ok, :highfive:
You should get this screen
remember your phone is still connected to the pc the whole process
Now open the other file
AGAIN, if you get this kind of error ( device not found )
Then you you probably did the same thing and proceed without making sure of finishing the prev.step.
But if you did it correctly, you should see this:
it MIGHT (probably will) fail the first time, just exit and run the file again to make sure.
Then you are ready to go
now you will be automatically on the first option ( reboot system now ) just press the home key and the phone will reboot
open the app menu and you should see ( super user ) installed on your phone
to make sure you are rooted just go to the google store and search Titanum backup
install it and you will see it Require the super user request to proceed,
or you can just search for any root checker app as well
https://play.google.com/store/apps/details?id=burrows.apps.rootchecker
many thanks to the people who find out the way to root the phone :highfive:
i just LOOOVE to create Tutorials :good: :victory:
if you have any questions feel free to ask in the comments )
Good tutorial.
I'm glad that we have a dev forum for mini II. First stiky posts must be: how to root, how to install a custom ROM, how to go back to stock.
help! i rooted and then installed rom toolbox and now i accidentaly clicked reboot to recovery in rom toolbox. and now i always boot to recovery please help
rhisendark said:
help! i rooted and then installed rom toolbox and now i accidentaly clicked reboot to recovery in rom toolbox. and now i always boot to recovery please help
Click to expand...
Click to collapse
just flash back to stock rom via odin
you can find stock rom at sammobile.com
and remember its always best to make backup before installing roms.
Sent from my GT-S6500D using xda app-developers app
joey_W said:
just flash back to stock rom via odin
you can find stock rom at sammobile.com
and remember its always best to make backup before installing roms.
Sent from my GT-S6500D using xda app-developers app
Click to expand...
Click to collapse
lol i did same thing nearly took nani back up with rom toolbox boot me to cwm to get back ups.. well it did good but it doesnt boot normaly to system after back up keep geting me in recovery mode and cant get in download mode to flash a firmware to fix it need help |! any advice, walktho... will be cool. thx..
--
i just took it in DL mode looks everything going good right now installing S6500XXLD2 to jump in peters mod.
--
had problem whil flashing XXLD2 odin gave error like this phone still at download mode and progress stop arond %95ish. now i need a serious help ..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500XXLD2_S6500XXLD2_S6500DBTLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img.ext4
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> fat.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
phone says in download mode Secure check fail : ID 0xc
--
phone still on at download mode stuck at loading screen with that secure check fail thingy.. i ll keep it up dont mess up any thing till someone gives a hand
hayta77 said:
lol i did same thing nearly took nani back up with rom toolbox boot me to cwm to get back ups.. well it did good but it doesnt boot normaly to system after back up keep geting me in recovery mode and cant get in download mode to flash a firmware to fix it need help |! any advice, walktho... will be cool. thx..
--
i just took it in DL mode looks everything going good right now installing S6500XXLD2 to jump in peters mod.
--
had problem whil flashing XXLD2 odin gave error like this phone still at download mode and progress stop arond %95ish. now i need a serious help ..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500XXLD2_S6500XXLD2_S6500DBTLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img.ext4
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> fat.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
phone says in download mode Secure check fail : ID 0xc
--
phone still on at download mode stuck at loading screen with that secure check fail thingy.. i ll keep it up dont mess up any thing till someone gives a hand
Click to expand...
Click to collapse
My meant your problem from cable usb or port usb you pc try orther usb or orther pc.. CMIIW
Sory for my bad english
Sent from my GT-S6500D using xda app-developers app
..
It's working great
But how to revert back to original recovery??
Just flash a stock rom.
Wysyłane z mojego GT-S6500D za pomocą Tapatalk 2
Thanks for this great tutorial :laugh:
I've made a Video
S6500L
Hello am asking around with no answers but whats the difference with the S6500L and the other models and will this rooting process and the other roms work on it? Thanks in advance
Thx for the TUT, 2 quick question.
Do you have a list with apps can uninstalled safe?, or know the link in the forum with this info?
It will increase the bin counter(number) after installing CWM and rooting?
nikobadboy said:
It will increase the bin counter(number) after installing CWM and rooting?
Click to expand...
Click to collapse
yes after installing CWM using odin
Thanks , this vid help me a lot couse this is my first android phone
Sent from my GT-S6500D using xda app-developers app
I cant find Odin3 v1.85.exe in mini2 rar are (clockworkmod-5.0.2.8.tar.md5 and RootMe) and in Root me are (run me and a folder named "files")
Ok I google it and I downloadit!
Now I can not boot in Recovery mode, I try and try but it boots normaly and not in Recovery.
And again I din't disconect my USB cable before I try to boot in Recovery, so it didn't, but with the cable disconectid it was all good and now my phone is root.
Everyone please see the video.
THANX MAN!!!
nice work
Sent from my Optimus Net using xda app-developers app
How to Unroot ?
Hi , it is great rooting tutorial so thanks
But i really want to know how did you unroot your phone
Because my friend want to it with his phone so pleas help
thx m8 good tutorial for first time users. :good::highfive:
Regards
MB from Holland
Require help to revive my bricked Samsung 8.9 3G. Any assistance/advice would be greatly appreciated. Background
of issue faced are as follows:
Attempted factory reset failed. Ended up in Kernel Panic Upload Mode. Unable to startup, unable to shutdown.
Booted into download mode, flashed stock 4.0.4 ROM (obtained within forum from omarainea) with Odin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQJ_P7300XFVLP4_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Process completes but tablet is stuck at boot animation of Samsung logo.
Performed power on/off to find error screen stating "Power Reset or Unknown Upload Mode". Once again unable
to start up or shutdown.
I would try flashing a custom recovery with ODIN, and using that to flash a custom rom.
upconvert said:
I would try flashing a custom recovery with ODIN, and using that to flash a custom rom.
Click to expand...
Click to collapse
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Downloaded recovery.img from CWM website. Applied conversion tool found in forum :
http://forum.xda-developers.com/showthread.php?t=2281287
Proceeded to flash with Odin, only to be met with failure.
Am I doing something wrong?
Also, I read somewhere that bootloader has to be unlocked for Odin to be able to flash recovery. Could that possibly be the issue and if
so how do I unlock the bootloader on this device?
tangene said:
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Downloaded recovery.img from CWM website. Applied conversion tool found in forum :
http://forum.xda-developers.com/showthread.php?t=2281287
Proceeded to flash with Odin, only to be met with failure.
Am I doing something wrong?
Also, I read somewhere that bootloader has to be unlocked for Odin to be able to flash recovery. Could that possibly be the issue and if
so how do I unlock the bootloader on this device?
Click to expand...
Click to collapse
Try it with the .tar from the stickies in the android development forum.
Attempted to flash ClockworkMod Recovery v5.5.0.4 found in http://forum.xda-developers.com/showthread.php?t=1312218
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Tablet then reboots directly to download mode. Unable to enter newly installed recovery, unable to shutdown.
Retried several times to same result.
Are you doing the right key combo to get to recovery? Restart tab, as soon as the 8.9 logo pops up, press and hold volume down (the one closer to the power button). When bootloader screen comes up press volume down one more time to select recovery, and volume up once to select. Sorry if this is obvious, just wanted to make sure.
Correct me if I'm wrong but power+vol down basically brings you to a screen where you're given a choice
between download mode (denoted by a blinking green Andy) and recovery mode (Andy coming out of a box).
I select recovery, tried all buttons, no response. The "icon" flashes for a moment when key is pressed but
nothing happens.
That's correct. It sounds like your bootlader might be borked. Unfortunately, idk how to flash a new one without a working recovery. Sorry.
You might be able to flash a bootloader.zip in odin as a pda. I have never tried this, and I have no idea if it will work, or if it will further break your tab.
Am I correct that you have a p7300? If it is a p7300 or a p7310, this is the right bootloader:
http://forum.xda-developers.com/showpost.php?p=32802991&postcount=1085
upconvert said:
That's correct. It sounds like your bootlader might be borked. Unfortunately, idk how to flash a new one without a working recovery. Sorry.
You might be able to flash a bootloader.zip in odin as a pda. I have never tried this, and I have no idea if it will work, or if it will further break your tab.
Am I correct that you have a p7300? If it is a p7300 or a p7310, this is the right bootloader:
http://forum.xda-developers.com/showpost.php?p=32802991&postcount=1085
Click to expand...
Click to collapse
I read some replies about flashing this bootloader, and it seems like it works
but I noticed that @kallt_kaffe mentioned that you should flash the bootloader using the bootloader option instead of the PDA:
kallt_kaffe said:
Unzip and flash with Odin (using the Bootloader option instead of the PDA option that you use when you flash a full rom)
Click to expand...
Click to collapse
so I'am not sure but I think you should try to use the bootloader option first
good luck
Thanks for all the help I've gotten from both of you, I've managed to get CWM to work on my tab.
Now what? How exactly would I fix my problem using CWM from this point forward and what files would I need to do so?
tangene said:
Thanks for all the help I've gotten from both of you, I've managed to get CWM to work on my tab.
Now what? How exactly would I fix my problem using CWM from this point forward and what files would I need to do so?
Click to expand...
Click to collapse
Flashing the bootloader was the solution ???
I can think of two things
ether you should try to flash a stock Tar ROM by Odin
or you should transfer any flashable Zip ROM by USB adb connection and flash it through CWM
omarainea said:
Flashing the bootloader was the solution ???
I can think of two things
ether you should try to flash a stock Tar ROM by Odin
or you should transfer any flashable Zip ROM by USB adb connection and flash it through CWM
Click to expand...
Click to collapse
Actually I'm not sure whether it's the bootloader OR the fact that I switched to a laptop and a different USB from the one I was
using before.
That said, I have tried flashing the ROM you gave me the link to in mail. Didn't work. As before the installation completed only to be stuck at
the Samsung logo upon reboot.
How would I proceed with the flashable zip ROM USB adb thing with CWM? And what files would I need? Pardon my ignorance but I'm just
pretty new to all this.
You need to use cwm to flash a custom rom. There are several in the android development section. You need to download the rom.zip and gapps.zip from one of those threads, and put them on the internal storage of your tab. Hopefully, when you hook it up to a pc it will pop up as a media player or storage device, and you can just drag and drop them on there. If not, you may need to set up adb and push the files over to the tab.
Once you get the files on there, normally one would do a nandroid backup. In your case, without a working rom, I don't think that will be usefull. You need to wipe (format) system, data, cache, and dalvik, then install the rom.zip, then the gapps.zip.
I am having similar issues with my tab, flashed an official rom from sam mobile through odin, just hangs on the samsung boot screen. Could it be a boot loader issue?
upconvert said:
You need to use cwm to flash a custom rom. There are several in the android development section. You need to download the rom.zip and gapps.zip from one of those threads, and put them on the internal storage of your tab. Hopefully, when you hook it up to a pc it will pop up as a media player or storage device, and you can just drag and drop them on there. If not, you may need to set up adb and push the files over to the tab.
Once you get the files on there, normally one would do a nandroid backup. In your case, without a working rom, I don't think that will be usefull. You need to wipe (format) system, data, cache, and dalvik, then install the rom.zip, then the gapps.zip.
Click to expand...
Click to collapse
Device doesn't register as a storage device. No idea how to push files over with ADB or even how I would access ADB with
the Samsung 8.9. Could someone take the trouble to give me some step-by-step idiot proof instruction I could follow?
Ok, sorry for being late, I was collecting information and doing some experiences
on my tab to get all the details you need
So, to transfer a file through adb USB connection while in recovery you should
Install ADB Drivers and use the ADBGUI to copy the files to the tab
First of all mount /sdcard from the mount and unmount section in CWM, connect your tab through USB cable while in CWM and then
when you open the ADBGUI tool it should automatically detect your tab and show you figures like number 1 in the screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you see any figures in the same place, then your device is connected through adb
now open the Basic Commands tab (number 2)
Select File and browse it to the ROM.Zip you want to flash (number 3)
[it is recommended to be small file cuz you might need to do this more than once]
I use for this matter a Stripped CM9 (67MB) just to boot and then I transfer through normal USB any ROM I want
write (/sdcard) in (number 4) to guide the tool to put the file on the sdcard
click Push File (number 5) and wait for 2 - 6 minutes [it depends on the size of the file]
now the file should be on your sdcard
just flash it and reboot
I hope I am not exaggerating in this guide
Hey All,
Just managed to get mine to stock! . I was having the issue of it hanging on the Samsung Boot screen, but I managed to fix this by, flashing CWM through odin AFTER flashing the stock rom. Then entering CWM and doing a factory reset/wipe and wiping dalvik cache. Tablet booted perfectly into stock 4.04! Now just need to flash stock recovery and everything is back to stock
TwinCalibre said:
Hey All,
Just managed to get mine to stock! . I was having the issue of it hanging on the Samsung Boot screen, but I managed to fix this by, flashing CWM through odin AFTER flashing the stock rom. Then entering CWM and doing a factory reset/wipe and wiping dalvik cache. Tablet booted perfectly into stock 4.04! Now just need to flash stock recovery and everything is back to stock
Click to expand...
Click to collapse
That was easy,,,,
I created This Zip from the last Stock Framewok
you just need to flash it through CWM
Note: this is a stock kernel so you if you install it you won't be able to flash anything anymore
but you'll still be able to enter it and do wipe data and cache only
Enjoy
Thankyou!!! Ill flash it now and report back
---------- Post added at 06:23 PM ---------- Previous post was at 06:18 PM ----------
omarainea said:
That was easy,,,,
I created This Zip from the last Stock Framewok
you just need to flash it through CWM
Note: this is a stock kernel so you if you install it you won't be able to flash anything anymore
but you'll still be able to enter it and do wipe data and cache only
Enjoy
Click to expand...
Click to collapse
Works absolutely perfectly! Thank you so much for your help! This is going on Ebay now
There doesn't seem to be an option in CWM mount/storage for me to mount /sdcard. Options available for selection:
mount /efs
mount /system
unmount /cache
mount /data
mount /preload
format /system
format /data
format /preload
ADB Drivers and GUI installed though.