Database Develop

[ROM][DISCONTINUED]!!PureBlur v1.2-based on the latest HKTW 2.3.4 official update!!

This is my first ROM!
WORKING NOW!!
DO NOT download the ROM UNLESS you know what you are doing!
I am not responsible for any bricked!!
Screenshot gone! (just stock blur UI)
Features:
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI (Thanks zomgno1)
Zipaligned
Deodexed
Rooted
4 points multi-touch with 15 seconds crack
EXT4
faux123's kernel [email protected]
Click to expand...
Click to collapse
Installation guide:
1. press Vol-down while booting and navigate to "Android recovery" Press Vol-up for going into Clockworkmod Recovery (Custom CWM-based Recovery 5.0.2.3-atrix4.1 recommended)
2. BACKUP FIRST!!!
3. Wipe data/factory reset
4. Wipe cache
5. Wipe dalvik cache
6. install the ROM
7. Reboot to enjoy the overclocked Blur!
Click to expand...
Click to collapse
Changelog:
Next update:
---
v1.2
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI
Download update v1.2
v1.1.1
Removed Carrier name from status bar
1% battery mod
Download update v1.1.1
v1.1
Delete DSP manager
Add EXT4 support
multi-touch hack with 15 seconds crack
v1.0
Initial release
Click to expand...
Click to collapse
Known issue(s):
Click to expand...
Click to collapse
Thanks to faux123, Diviance, zomgno1(HDMI hack) and also Motorola
Click to expand...
Click to collapse
For those who suffer from widget problem, please install the stock kernel. Since I don't know if your device compatible with HK stock kernel.
DOWNLOAD (v1.1)
DOWNLOAD WEBTOP

I was about to download the original sbf and deodex it.
You save my time.
Many thanks
Sent from my MB860 using XDA App

Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium

supermerkin said:
Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
HKTW got special settings for crystal talk

does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...

So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium

totti123456 said:
does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...
Click to expand...
Click to collapse
I would assume so. The missing widgets problem appears to be linked to faux's kernel, which this has. In faux's thread even people on CM7 that use his kernel experience the widget problem.

supermerkin said:
So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
It is no necessary to back to stock.
I had CM7 before. After Wipe data, cache, then install, no problem at all.

Lol did you remove the download link?

I'll try it again. Maybe I'll do a restore shook the way back to after I unlocked and rooted before flashing and see what happens.
Sent from my MB860 using xda premium

So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium

supermerkin said:
So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
So, this is the reason I removed the ROM and now I'm try to make it OK
SORRY!

This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)

alistair3149 said:
This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)
Click to expand...
Click to collapse
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.

No worries, at least I'm not bricked. Just post the update and I'll try it again later.
Sent from my MB860 using xda premium

nok07635 said:
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.
Click to expand...
Click to collapse
It is not your fault,
this rom is for ME860,
but Atrix international should be okay

can you release a version with stock kernel? i dont need to overclock, just want a stable deodexed custom rom... thanks!

Boot up success but I am using AURA ROM developer Diviance's updater-script. I must ask his permission to release!
BTW I try to reboot the phone to see if the widgets missing. Honestly, No problem with BlurHome launcher

The widget problem seems to occur at a random time. It took a few days worth of rebooting to happen to me on homebase. After it happened the only permanent fix was to revert to stock kernel.
Sent from my MB860 using Tapatalk

hi.İ want to ask:
which languages are supported your rom?

[SCRIPT]Wipe All Zip

This was popular on other phones. This is a zip that will wipe cache, data, system and dalvik. This is meant to be a quick pre-wipe for flashing roms. You would flash this first and then the rom right after. This wipes data but will not wipe the /data/media folder. So your pics, music etc... will be safe. Basically everything in /sdcard will not be wiped.
DO NOT FLASH THIS WITHOUT FOLLOWING IT UP WITH A ROM OR YOUR PHONE WILL NOT BOOT
If you do it by mistake just boot into recovery and install a Rom.
SOME ROMS REQUIRE A BUILDPROP CHECK BEFORE IT WILL INSTALL. DON'T USE THE SYSTEM WIPE ZIPS WITH THOSE ROMS AS THE BUILDPROP WILL BE ERASED. Thanks To Shoulon
Downloads:
Download Wipe All Zip
MD5: 6d275bdc3d02816fdaba78d41c576b34
Download Wipe All With Permissions Fix Zip Thanks to Shoulon for letting me know and to mattrb for creating the script.
MD5: 8ede6880f0f7c40d4ad17b83b4e5883f
Download Wipe All But Data Zip
MD5: 6491ff8e1529ef2c491600c07a64b5cb
Download Wipe All But Data With Permissions Fix Zip Thanks to Shoulon for letting me know and to mattrb for creating the script.
MD5: d8d63ee2c6f4d9da7cf65f58a83c8a41
Download Kernel Cleaner Zip - Wipes Cache, Dalvik And Fixes Permissions
MD5: 0de097b7d0a58c1304e884435b904080
Mirrors:
Skydrive
Copy

Installation Instructions:
Installing Custom Recovery
How To Use Odin
How To Use ADB To Install A Custom Recovery
Custom Recovery Method
How To Install A Zip With CWM
How To Install A Zip With TWRP

I LOVE scripts like this. Just makes it easier to say "Flash this", instead of telling someone what all options to check. Thanks a lot!

Thank you in behalf of all of us lazy guys
Sent from my SPH-L720 using Tapatalk 2

Does this wipe the internal sd?

Awesome.. Any chance you can make a "kernel cleaning" script. Just wiping cache, dalvik, and fixing permissions?
Sent from my SPH-L720 using Tapatalk 2

TheAxman said:
Does this wipe the internal sd?
Click to expand...
Click to collapse
No.
Sent from my SPH-L720 using xda premium

jsmcmahon89 said:
Awesome.. Any chance you can make a "kernel cleaning" script. Just wiping cache, dalvik, and fixing permissions?
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
I'll look at it.
Sent from my SPH-L720 using xda premium

Some ROMs require a build.prop check before flashing, perhaps a disclaimer regarding that should left in the OP?
Also here's the kernel cleaning zip provided on KToonsez SGSIII kernel thread. if it helps add that script to the OP. (it wipes cache dalvik and fixes permissions)
http://forum.xda-developers.com/showthread.php?t=1800576
made by mattrb. vvvv

crawrj said:
No.
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
Thank you kind sir...I will be using this shortly...
Sent from my SAMSUNG-SGH-I337 using xda premium

Shoulon said:
Some ROMs require a build.prop check before flashing, perhaps a disclaimer regarding that should left in the OP?
Also here's the kernel cleaning zip provided on KToonsez SGSIII kernel thread. if it helps add that script to the OP. (it wipes cache dalvik and fixes permissions)
http://forum.xda-developers.com/showthread.php?t=1800576
made by mattrb. vvvv
Click to expand...
Click to collapse
OK I will do that. I have never installed a Rom that required that so I had no idea. And thanks for the permissions fix.

crawrj said:
OK I will do that. I have never installed a Rom that required that so I had no idea. And thanks for the permissions fix.
Click to expand...
Click to collapse
Ive only ever seen the build.prop checking in some aosp variant roms. Might be why.
Sent from my SPH-L720 using xda premium

Shoulon said:
Some ROMs require a build.prop check before flashing, perhaps a disclaimer regarding that should left in the OP?
Also here's the kernel cleaning zip provided on KToonsez SGSIII kernel thread. if it helps add that script to the OP. (it wipes cache dalvik and fixes permissions)
http://forum.xda-developers.com/showthread.php?t=1800576
made by mattrb. vvvv
Click to expand...
Click to collapse
Just to make it clear DON'T INSTALL THE SCRIPT AS IT IS POSTED! Wait for me to update the original script with the permissions fix.
Edit: OK the fix permissions version has been added to the OP. I have never needed to fix permissions before so I made two versions to choose from.

Nice, thanks Crawrj! Any chance of a "wipe all no data" version?

Just_s said:
Nice, thanks Crawrj! Any chance of a "wipe all no data" version?
Click to expand...
Click to collapse
It is in the OP now.

crawrj said:
It is in the OP now.
Click to expand...
Click to collapse
FAST!!! Wow, thanks again! The no data version comes in very handy for psuedo-dirty installs.

crawrj - The fix permissions part is because some people make kernels and include a Control app. Like Ktoonsez, all his kernels include his KTweaker app to adjust gov, IO, volts ect.... so you gotta fix perms when flashing his kernel since the app goes in System/app

Shoulon said:
crawrj - The fix permissions part is because some people make kernels and include a Control app. Like Ktoonsez, all his kernels include his KTweaker app to adjust gov, IO, volts ect.... so you gotta fix perms when flashing his kernel since the app goes in System/app
Click to expand...
Click to collapse
Ahhh got it. Thanks for the info.
Sent from my SPH-L720 using xda premium

Thanks crawj. Your work was appreciated in the E4GT forum. I see your continuing that here in the GS4 forum. Thank you

So am I correct thinking this zip will work on my sprint s3?
L710 Rockin The Peoples Rom

Most popular apps and mods for L7

I post these apps and mods because they are the most popular, so you will not need any time to make unnecessary requests.
in this rar file there are: 1) 4.2 clock
2) 4.2.2 keyboard
3) 6.0.3.2 cwm recovery
4) framaroot 1.4.1 (apk for root your phone) all rights to "alephzain"
1-2) the 4.2 clock and 4.2.2 keyboard are installable with cwm recovery. i use these in cm10.
3) i install it with Nandroid Manager. download it from playstore or another market it is not free app
4) it is a simple apk for root your phone, i use it with v20d rom.
LINK: http://db.tt/AcBCgsAV

michelemascia7 said:
I post these apps and mods because they are the most popular, so you will not need any time to make unnecessary requests.
in this rar file there are: 1) 4.2 clock
2) 4.2.2 keyboard
3) 6.0.3.2 cwm recovery
4) framaroot 1.4.1 (apk for root your phone) all rights to "alephzain"
1-2) the 4.2 clock and 4.2.2 keyboard are installable with cwm recovery. i use these in v20d rom, and cm10.
3) i install it with Nandroid Manager. download it from playstore or another market it is not free app
4) it is a simple apk for root your phone, i use it with v20d rom.
LINK: https://www.dropbox.com/s/nnul0hj998sk688/APPS&MODS_by_michelemascia7.rar
Click to expand...
Click to collapse
The oc and keyboard didnt work

It dosen't work me either,clock and keyboard force to close.
Sent from my LG-P700 using xda premium

which rom are you using? you did wipe cache and dalvik cache first or after flash apps?

michelemascia7 said:
which rom are you using? you did wipe cache and dalvik cache first or after flash apps?
Click to expand...
Click to collapse
V20D
Sent from my LG-P700 using xda app-developers app

caiejay said:
V20D
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
okok I now have cm10 and it works. but it is possibile that I remember bad, maybe I had used in the V20A. the clock instead remember perfectly well that worked

what are the changes from cwm 6.0.3.2

ubuntuh said:
what are the changes from cwm 6.0.3.2
Click to expand...
Click to collapse
I do not know :/ some changes in the interface command. try it and find out what other changes . but I think nothing special

exure beeyers
ubuntuh said:
what are the changes from cwm 6.0.3.2
Click to expand...
Click to collapse
Compared to 6.0.2.8, you can choose the path you want, nothing more(external card have a path to redirect or direct to internal memory).6.0.2.8 redirect to external card directly ,without possibility to choose.That I remarked.

bogdan109 said:
Compared to 6.0.2.8, you can choose the path you want, nothing more(external card have a path to redirect or direct to internal memory).6.0.2.8 redirect to external card directly ,without possibility to choose.That I remarked.
Click to expand...
Click to collapse
yes, with the changes of interface commands mean that. sorry for misunderstanding

Op, will framaroot work in v20a?
Sent from my LGP705G - PACman using Tapatalk.

vaikz said:
Op, will framaroot work in v20a?
Sent from my LGP705G - PACman using Tapatalk.
Click to expand...
Click to collapse
sorry, i don't know :/ i tried it only v20D. try it and let me know but it should work!

I have read sooooo many posts with links dead, this is one of them.

AsianFoodRules said:
I have read sooooo many posts with links dead, this is one of them.
Click to expand...
Click to collapse
Sorry, i upload now the files. I don t know because the link was deleted :/
OK now work
Sent from my LG-P700 using xda premium

The keyboard doesn't work on V20D, I flashed it through CWM and it says it flashed but when I go back into my phone there is no difference.
I formatted cache and dalvik cache before flashing the keyboard.
Same thing with the clock.
Delivered from my V20D running at 1.4GHz

SteveBenz said:
The keyboard doesn't work on V20D, I flashed it through CWM and it says it flashed but when I go back into my phone there is no difference.
I formatted cache and dalvik cache before flashing the keyboard.
Same thing with the clock.
Delivered from my V20D running at 1.4GHz
Click to expand...
Click to collapse
OK thanks for informations! Yet I remember that at least the clock worked. Now change the description
Sent from my LG-P700 using xda premium

michelemascia7 said:
OK thanks for informations! Yet I remember that at least the clock worked. Now change the description
Sent from my LG-P700 using xda premium
Click to expand...
Click to collapse
Oh okay, that sucks, I was looking forward to the keyboard

A newbie using JB 4.1.2 and get some serious problems (need help)

I was updated my note with official JB 4.1.2 using odin pc and got pda from samfirmware.com
It has been 4 days since updated and now my note get laggy-performance (gsming,tasking,graphics) and drain battery fast. Bad graphic while play a game and 'unexpected error is occured' pop-up shown are make me mad, regret with this jb update.
I had asked this before and get some advices, such as get kernel (a lot of it kinds), custom rom, etc. I dont even know about that at all. it just make me more confused. So, please tell me about some stuff around this problem and kernel-rom-etc.
Thanks a lot for your coming to notice and help me any futher.
Sent from my GT-N7000 using xda premium

Ok first of all i dont think this thread shouls be in the general fprum , it should be in the Q&A forum
Anywayz i tried stock 4.1.2 after 10 minutes i changed it
I recomment try JonROM or Live note these are the best the i have tried they are fast , stable , battery friendly
Sent from my GT-N7000 using xda premium

Warnahly said:
Ok first of all i dont think this thread shouls be in the general fprum , it should be in the Q&A forum
Anywayz i tried stock 4.1.2 after 10 minutes i changed it
I recomment try JonROM or Live note these are the best the i have tried they are fast , stable , battery friendly
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sure we know what is 'general' means. You right this thread should be in the q&a forum, but this content also have general issue that all newbie like me could learn from answers. However thanks for that concern and I have post this at there.
Btw, what is stock and ROM means? Just like i have told that i really blind with all this strange things around android. So please give me some teach.
Sent from my GT-N7000 using xda premium

teukubahran said:
Sure we know what is 'general' means. You right this thread should be in the q&a forum, but this content also have general issue that all newbie like me could learn from answers. However thanks for that concern and I have post this at there.
Btw, what is stock and ROM means? Just like i have told that i really blind with all this strange things around android. So please give me some teach.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Stock firmware is the original samsung firmwares not edited not rooted not tweaked nothing
ROM could be many thing TW is like samsung based firmware but has a few extra touches like rooting some tweaks and apps that requires root stuff like that
And another kind is on CyanogenMod this sort of roms offers speed more smoothnes and lot better performance than touchwiz but still with it you cant use s-pen features like on the stock and some other bugs
And there are AOKP they are similiar in looks like CyanogenMod but with a really masive customizations available in there
So thats the main thing you should kniw
Sent from my GT-N7000 using xda premium

Please read the forum rules before posting.
Questions go in the Q&A section.
Thread moved.
Towle
XDA Moderator

Towle said:
Please read the forum rules before posting.
Questions go in the Q&A section.
Thread moved.
Towle
XDA Moderator
Click to expand...
Click to collapse
Yeah okay. Sorry I miss the rules. Warnahly also told me before.
Sent from my GT-N7000 using xda premium

Warnahly said:
Stock firmware is the original samsung firmwares not edited not rooted not tweaked nothing
ROM could be many thing TW is like samsung based firmware but has a few extra touches like rooting some tweaks and apps that requires root stuff like that
And another kind is on CyanogenMod this sort of roms offers speed more smoothnes and lot better performance than touchwiz but still with it you cant use s-pen features like on the stock and some other bugs
And there are AOKP they are similiar in looks like CyanogenMod but with a really masive customizations available in there
So thats the main thing you should kniw
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Oooh I see. enough introduction for this time (first time definetely) .
So stock was the thing that I updated right. According to you, what thing that I should have to update to solve problems?
Sent from my GT-N7000 using xda premium

teukubahran said:
Oooh I see. enough introduction for this time (first time definetely) .
So stock was the thing that I updated right. According to you, what thing that I should have to update to solve problems?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
you can try wiping /system /preload /data /cache /dalvik cache and flash the stock rom again or you can try custom roms of your choice after reading from here. (dont ask which is the best, just read reviews, watch youtube videos and decide for yourself)
Edit: you can flash philz kernel first from here first and then do all the wipes:
http://forum.xda-developers.com/showthread.php?t=1901191

treacherous_hawk said:
you can try wiping /system /preload /data /cache /dalvik cache and flash the stock rom again or you can try custom roms of your choice after reading from here. (dont ask which is the best, just read reviews, watch youtube videos and decide for yourself)
Edit: you can flash philz kernel first from here first and then do all the wipes:
http://forum.xda-developers.com/showthread.php?t=1901191
Click to expand...
Click to collapse
Will lost all data (int,ext) happen while do wiping like you said?
And i have other question, which better i do first for installizing, rom or kernel?
Thanks
Sent from my GT-N7000 using xda premium

Look, you're having problems with the stock ROM, after the update. Now u have some choices,
1)Going back to ICS using sammobile and ODIN.
2)Flashing the PhilZ kernel using the link given by treacherous_hawk and then doing those wipes and again install JB using ODIN, like you did earlier. yes it'll wipe all the data so better back up the phone on PC before doing the wipes.
3) Use custom ROMs. You can read about the custom ROMs in the Android development forum, there are methods to root with the CWM recovery and then how to install custom ROMs.

Varad297 said:
Look, you're having problems with the stock ROM, after the update. Now u have some choices,
1)Going back to ICS using sammobile and ODIN.
2)Flashing the PhilZ kernel using the link given by treacherous_hawk and then doing those wipes and again install JB using ODIN, like you did earlier. yes it'll wipe all the data so better back up the phone on PC before doing the wipes.
3) Use custom ROMs. You can read about the custom ROMs in the Android development forum, there are methods to root with the CWM recovery and then how to install custom ROMs.
Click to expand...
Click to collapse
Yesterday I had flashing philz kernel XXLT6 and then did rooted with rootsuperuser file (install at cwm).
And now when turn on phone, opening 'galaxy note n7000' show with caution sign, that sign was never shown before. Is it safe for my note? Was it true behave?
What should i have to do? with right step actually. What first, what then, what last.
FYI: my pda stock rom DXLSE
Sent from my GT-N7000 using xda premium

teukubahran said:
Yesterday I had flashing philz kernel XXLT6 and then did rooted with rootsuperuser file (install at cwm).
And now when turn on phone, opening 'galaxy note n7000' show with caution sign, that sign was never shown before. Is it safe for my note? Was it true behave?
What should i have to do? with right step actually. What first, what then, what last.
FYI: my pda stock rom DXLSE
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
you got the yellow exclamation mark because you used the .tar file for philz kernel. if you use the .zip file and flash it from stock recovery you automatically get root and no yellow triangle. You can remove the yellow triangle using the "triangle away" app from play store( paid version, if you consider donating) or search for free version on XDA. use that to get rid of yellow triangle.

That is the yellow triangle you've got. Don't worry mate. It's just a symbol, if u wanna get rid of it, go to the Android development forum here and there will be a thread for how to remove yellow triangle, read that. The sign is nothing to be worried about. Now you have rooted, you can flash the various custom ROMs and be extremely carefull to follow the instructions in the ROM thread before you flash.

Hmm okay guys.
So um, what should i have to do first? Wiping data and then install new stock rom or reinstall kernel firstly or what?
I was read in android dev.thread and got nothing exactly the same with my problems. I need some right step to doing stuff (philz kernel, wipe data, update new stock), so that nothing bad will happen to note.
Thanks brfore
Sent from my GT-N7000 using xda premium

teukubahran said:
Hmm okay guys.
So um, what should i have to do first? Wiping data and then install new stock rom or reinstall kernel firstly or what?
I was read in android dev.thread and got nothing exactly the same with my problems. I need some right step to doing stuff (philz kernel, wipe data, update new stock), so that nothing bad will happen to note.
Thanks brfore
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
if you are not on safe kernel, you should install safe kernel first like philz (which i guess you already did) boot into recovery mode and do all the wipes (if you do not want to save any data). put the phone in download mode connect to computer, open pc odin, click pda select the stock rom from save location and click start. Once finished put the philz kernel on ext sd card (the one corresponding to your stock rom) and go to stock recovery and install zip from ext card and select the philz kernel .zip file and you should be good to go.

treacherous_hawk said:
if you are not on safe kernel, you should install safe kernel first like philz (which i guess you already did) boot into recovery mode and do all the wipes (if you do not want to save any data). put the phone in download mode connect to computer, open pc odin, click pda select the stock rom from save location and click start. Once finished put the philz kernel on ext sd card (the one corresponding to your stock rom) and go to stock recovery and install zip from ext card and select the philz kernel .zip file and you should be good to go.
Click to expand...
Click to collapse
Once finished wiping, we should choose 'reboot system' or just 'power off' , and go to download mode after that?
Sent from my GT-N7000 using xda premium

Do wiping clear all contact in all messenger types?

teukubahran said:
Do wiping clear all contact in all messenger types?
Click to expand...
Click to collapse
If the contacts are in phone memory they would get deleted.. If you go to mounts/storage and choose the last option mount usb while connected to computer and delete everything on internal memory (not on external sd) you will be able to clear up usb storage space too but then you will lose what's app data (example)..
Sent from my GT-N7000 using xda app-developers app

treacherous_hawk said:
If the contacts are in phone memory they would get deleted.. If you go to mounts/storage and choose the last option mount usb while connected to computer and delete everything on internal memory (not on external sd) you will be able to clear up usb storage space too but then you will lose what's app data (example)..
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Will happen lost all external sd data?

Anyway, i did it and all game data saved were lost. Whereas I pasted the back up data from pc. Why this happened abd what the solutions?
Sent from my GT-N7000 using xda premium

Any thoughts?

Dear all;
Today i finally decided to unlock the bootloader and s-off the device..but after these..my wifi was not working ...and still stucked at the turning on wifi phase.
Factory reset wiping cache did not help
I found out that i should flash a newnstock rom...but to be honest i did not find the stock 4.3 for the european device (ruu).. i found some zips but the recovery stopped at verifying package when i said install from phone...so to be honest i have no clue how to proceed
How to flash it what to do? The guides are not always complete or the links were not working... i need help i will post the info on my device..
Would you be so kind and tell me what to do?
In details of course)
Thank you very very much
Sent from my gf's GT-I9300 using xda app-developers app

Which rom are you running?

Its the normal stock 4.2.2 i never flashed its rom its the normal ota i got previously
But see attachments
Sent from my GT-I9300 using xda app-developers app

zimilaci said:
Its the normal stock 4.2.2 i never flashed its rom its the normal ota i got previously
But see attachments
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Umh, download from mike's thread the stock rom and flash this.
Or flash only the boot.img from fastboot.
Seems a kernel "issue"
Sent from One with Tapa4

Well i am afraid i need more than that....i mean where can i find that guide..and how to flash it? Which method applies for my case?
Please be beginner friendly thanks for your help in advance.
Sent from my GT-I9300 using xda app-developers app

zimilaci said:
Well i am afraid i need more than that....i mean where can i find that guide..and how to flash it? Which method applies for my case?
Please be beginner friendly thanks for your help in advance.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Umh, download the stock rom from mike's thread.
Now, do a nandroid backup from recovery and after flash the rom.
I think there isn't any stock rom for your version main, so the easiest solution is this
However, you've tried to erase the cache from fastboot with the command: fastboot erase cache
??
Sent from One with Tapa4

Well i tried the wipe cache/ factory reset etc etc..
In the morning (cause its 2:23 am) i will try the nandbackup(although i have no clue about that) and then a 4.3 stock flash would be reasonable or not?
Thanks
Sent from my GT-I9300 using xda app-developers app

Defo kernel issue.
- Get odexed from here
http://android-revolution-hd.blogspot.no/p/android-revolution-hd-mirror-site-var.html?m=1
Or whatever you desire
- Put the downloaded Rom on to your SD.
- Enter cwm/twrp recovery and do a nand (=backup of current ROM)
- install zip of new stock Rom.
Reboot when done.
Either this or just flash bulletproof kernel from flar. see if it gets sorted.
Sent from my HTC One using XDA Premium 4 mobile app

Sindroid said:
Defo kernel issue.
- Get odexed from here
http://android-revolution-hd.blogspot.no/p/android-revolution-hd-mirror-site-var.html?m=1
Or whatever you desire
- Put the downloaded Rom on to your SD.
- Enter cwm/twrp recovery and do a nand (=backup of current ROM)
- install zip of new stock Rom.
Reboot when done.
Either this or just flash bulletproof kernel from flar. see if it gets sorted.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well I installed TWRP, did a backup, with the default selection, after that I booted, and copied the files.,
Then I copied the odexed file to the device, booted into recovery, and installed it.
Now Wifi Works , and everything is on the "latest" release and still stock.
My question is:
What ROM-s can I try out? Only Odexed? Or Google Editions as well (from the link you provided) and if yes...
I just make a backup from the current setup, and copy it, and then recovery from the backup am I right?
But mainly my problem has been solved... So thank you very much !

Odexed or deodexed, whatever rocks your socks.. if you are gonna do some themeing of icons you need deodexed.
You are S-off and are free to flash loads of stuff.
Google edition? Sure test it out if you want to.
Sure, just back up current Rom and keep it safe on your phone if you can. Any problems occurs you can just restore it.
Sent with pigeons.