[Q] No recovery anymore after flashing tilal's 10.2 build - Sony Xperia T, TL, TX, V

Hi,
as the tilte sys, I don't have a recovery anymore after flashing tilal's 10.2 build. Do I have to flash a new boot.img with fastboot as in stock?

That's odd. You can extract the boot.img from the zip and flash the image with fastboot:
fastboot flash boot boot.img
fastboot reboot
If this not works you also can flash an older cm10.2 version: http://goo.im/devs/tilal6991/roms/mint/cm-10.2/
After doing this you should flash the last 10.2 again. I never have lost CWM.
Edit: Sorry, youst reading this: http://forum.xda-developers.com/showpost.php?p=44230652&postcount=9
Maybe you have to flash an boot.img from the last 10.1 nightlies.
Another idea was to install this recovery (tilal advised this): http://forum.xda-developers.com/showthread.php?t=2115726
Download GooManager from PlayStore and load/install TWRP. But be sure that there is no backup you want to recover with CWM. I havn't found a way to recover older backups done with CWM.

I flashed a twrp image and the tilal build again from there. After reboot the recovera is away again. Later I will try to flash the boot.img from inside the rom.

So I flashed boot.img from inside the rom with fastboot but I still don't have a recovery. Does the keys to hold at start have changed?

Ok, I read in the roms thread that recovery is broken. Recovery should be installed in a fota partition. Do I have to simply flash the twrp fota image or do I have to do some other steps before flashing this.
Sorry for this noob questions but I rather ask before I will brick my device.

The last link in my answer above gives you all needed informations..

Phone screen dead after installing cynagenmod
Hi guys,
i am in reaaly a very big trouble,
just bought an xperia tx and i somehow rooted it then got cwm mode. Now after i installed the cynagenmod 10.1 by cwm i directly rebooted the phone and now the screen is staying black n the phone is not booting. The notification led is blinking and after pressing the power button its vibrating but not booting.
People say i didnt clear cache so this is the problem.
I am a rookie in this so please give me a detailed guide.
Need urgent help please it would be very kind.

Indy500xl said:
Hi,
as the tilte sys, I don't have a recovery anymore after flashing tilal's 10.2 build. Do I have to flash a new boot.img with fastboot as in stock?
Click to expand...
Click to collapse
I think that your issue comes from the fact that the ROM comes with advanced recovery options disabled. HW buttons don't work to go into recovery with this build for some reason. Having said that, you can boot into recovery from within the ROM.
Go to Settings > Developer Options and in there you will have an option called "Advanced Reboot". When you check that and you try to reboot your device (hold power button until menu pops up), hit "Reboot" and you will be prompted with a few options, one of which is "Recovery".
I hope this helps.

egzthunder1 said:
I think that your issue comes from the fact that the ROM comes with advanced recovery options disabled. HW buttons don't work to go into recovery with this build for some reason. Having said that, you can boot into recovery from within the ROM.
Go to Settings > Developer Options and in there you will have an option called "Advanced Reboot". When you check that and you try to reboot your device (hold power button until menu pops up), hit "Reboot" and you will be prompted with a few options, one of which is "Recovery".
I hope this helps.
Click to expand...
Click to collapse
Yeah, thank you. That did it.

Related

[Q] [XT1072] Recovery black screen

Hey guys, I'm having a weird little problem here.
So I followed this guide here, unlocked my bootloader, everything fine.
So far so good. I flashed the mentioned TWRP Recovery through fastboot, no error messages, still looks like everything's fine.
But whenever I try to get from the fastboot screen on my phone into recovery mode, the screen stays black.
I tried restoring to stock, hoping that would add the original recovery back in. Nope, still black screen.
After that, I successfully flashed the recovery from this thread. Again, no error messages and everything looked fine. But still no luck. My recovery screen stays black for whatever reason.
I'm on Windows 8.1 64Bit and using the current Android SDK. The SDK setup had a little problem with finding Java JDK (64Bit) before I could set it up properly. But I solved that one by adding a system variable. Again, nothing out of the ordinary here, at least as far as I understand.
So what am I doing wrong?
I'd really like to get a custom rom with root on this baby. Don't wanna be stuck on stock. :/
Does anybody have an idea, how I could manage to access any kind of recovery in this case?
If the screen stay black then something went wrong
Fastboot gave you the OKAY on flashing ? Did you reboot your phone after you flashed the recovery ?
You don't have to, if you reboot you will have the stock one again = black screen.
Try like i did (assuming you correctly unlocked the bootloader, and installed MotorolaDeviceManager).
1) Get the right recovery for XT1072 from the author's post HERE.
2) Download the latest CM rom from HERE and latest CM gapps package from HERE.
3)Move the CM rom and the gapps zips on the SD or EMMC then reboot to bootloader.
4)Flash the recovery whit "fastboot flash recovery twrp-thea.img" and check if you got the OKEY from fastboot (DO NOT REBOOT YET).
5)Now pick up your phone and use VOL-DOWN to highlight RECOVERY then VOL-UP to start the recovery.
6)You should have the TWRP menu open now, go WIPE -> ADVANCED WIPE and check Dalvik/Data/Cache/System then swipe to wipe those 4 partitions.
7)Go back to main menu and select install, flash the CM12.1 zip then gapps zip and now you can reboot, first boot take a while so don't panic.
P.S.
I uploaded for you the latest untouched platform-tools folder (rev22) for windows if you wish to try this one, LINK, VirusTotal scan.
dr.nic said:
If the screen stay black then something went wrong
Fastboot gave you the OKAY on flashing ? Did you reboot your phone after you flashed the recovery ?
You don't have to, if you reboot you will have the stock one again = black screen.
Try like i did (assuming you correctly unlocked the bootloader, and installed MotorolaDeviceManager).
1) Get the right recovery for XT1072 from the author's post HERE.
2) Download the latest CM rom from HERE and latest CM gapps package from HERE.
3)Move the CM rom and the gapps zips on the SD or EMMC then reboot to bootloader.
4)Flash the recovery whit "fastboot flash recovery twrp-thea.img" and check if you got the OKEY from fastboot (DO NOT REBOOT YET).
5)Now pick up your phone and use VOL-DOWN to highlight RECOVERY then VOL-UP to start the recovery.
6)You should have the TWRP menu open now, go WIPE -> ADVANCED WIPE and check Dalvik/Data/Cache/System then swipe to wipe those 4 partitions.
7)Go back to main menu and select install, flash the CM12.1 zip then gapps zip and now you can reboot, first boot take a while so don't panic.
P.S.
I uploaded for you the latest untouched platform-tools folder (rev22) for windows if you wish to try this one, LINK, VirusTotal scan.
Click to expand...
Click to collapse
YOU ARE AMAZING!!!!!!!
SPENT LIKE 3 HOURS FAILING. AND FAILING. AND FAILING! NEARLY BLOODY BRICKED.
I'll stop capsing.
But this worked!!!!!!!!!!! (I think, currently rebooting after flashing)
THANK YOU!
I tried it again and this time it worked!
Beautiful! :good:

Can't install TWRP on S3 mini (GT-i8190N)

Hi all,
I'm trying to install Cyanogenmod following techbeasts.com tutorial but I'm stuck at the first step : installingTWRP (or CWM).
I followed precisely all the instructions (I allow debugging mode, I installed samsung drivers, I start the phone in download mode, I connect it with OEM cable, I start Odin, it sees the phone, I select the tar.md5 file.), Odin confirms it went well (green box writing "PASS"), but when I try to boot the recovery mode by holding Volume up + Home + Power it seems to boot another recovery software that doesn't offer a backup or a flashing options: "Android system recovery <3e>"
Can't get it to run TWRP or CWM... Can't install the supersu package.
What I'm I doing wrong? Can someone help?
Try to untick Auto Reboot option from odin. I had similiar issues and reason was if you have updated your phone with OTA-updates then it installs some kind of backup script. When your phone boots again after you had installed twrp it installs stock recovery during boot. So untick autoreboot, flash twrp and force boot straight to recovery without letting phone boot to OS. You can also try to pull battery out, put it back and then boot into recovery mode.
Sorry my english and try to understand.
adbhitman said:
Try to untick Auto Reboot option from odin. I had similiar issues and reason was if you have updated your phone with OTA-updates then it installs some kind of backup script. When your phone boots again after you had installed twrp it installs stock recovery during boot. So untick autoreboot, flash twrp and force boot straight to recovery without letting phone boot to OS. You can also try to pull battery out, put it back and then boot into recovery mode.
Sorry my english and try to understand.
Click to expand...
Click to collapse
Great it worked, thanks a lot !
But now I'm stuck on the next step : flashing CM11
I rooted my phone, booted TWRP, chose "install>cm11" (the zip downloaded from nova fusion) but it says "failed" after a few sec...
I would post my TWRP log but the forum prevents me doing so...
Well I get few things that you could check first.
1. Do factory reset for example from twrp. Factory reset is needed/recommended before installing custom rom from offical OS.
2. Sometimes just installing fails almost immediately if you have ticked check zip signature.
After you have installed new rom clear cache and davilk cache just in case. I'll do that every time if I install or update custom roms. Also don't forget to install right gapps package after you have installed rom.
Sorry my english and try to understand.
ok just realized i downloaded the wrong cm image (the odin one, not the recovery)
everything running smooth now
Okay happy to hear that everything is fine now. Happy playing with custom roms

Trying to install TWRP on my Nexus 6 - keeps reverting back to stock recover

I have tried a number of times to install TWRP (unrooted) on my Nexus 6. I am following the instructions from here
https://twrp.me/devices/motorolanexus6.html
I am noting the warnings here
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Once I issue the fastboot reboot command before the Nexus 6 shows anything on the display I press power and vol down and get into TWRP. It seems to what it's supposed to do (presumably patch the stock ROM) and then I reboot to Android.
But the next time I boot to recovery I end up with stock recovery again. I have tried this a number of times and while I can get TWRP installed it always reverts to stock recovery after the next restart.
Is there something else I have missed here in the instructions? They seem fairly clear.
Not that I think it matters but I am running 7.1.1 (flashed with the OTA image since I was not getting OTA updates)
Thanks
Instead of using the fastboot command to reboot to recovery after you have flashed TWRP do it manually. Been a while but I believe that should work.
Dont use the fastboot reboot command, use the volume keys to enter twrp recovery after flashing twrp in fastboot mode
Once you are in twrp swipe to allow changes and if needed change twrp settings, after that reboot into rom.
TMG1961 said:
Dont use the fastboot reboot command, use the volume keys to enter twrp recovery after flashing twrp in fastboot mode
Once you are in twrp swipe to allow changes and if needed change twrp settings, after that reboot into rom.
Click to expand...
Click to collapse
I have done that several times. This is the screen I see when TWRP is loading for the first time.
Not sure if those red messages are fatal or not
When I am in TWRP I can reboot to recovery and it gets back to TWRP but if I reboot to system and then try to enter TWRP on a reboot (holding power and volume up/down it boots into the Fastboot and when I choose Recovery mode I send up with stock recovery again.
Am running 7.1.1 myself and flashed the latest TWRP 3.1.1-0
Were did you download the twrp img from? I download mine from https://dl.twrp.me/shamu/ Once i downloaaded it i rename it to recovery.img
I use cmd on laptop andhook up the phone, then run adb reboot bootloader followed by fastboot flash recovery recovery.img, then i use the volume keys to get into twrp, swipe to allow changes and make changes to settings. Then reboot into rom.
TMG1961 said:
Am running 7.1.1 myself and flashed the latest TWRP 3.1.1-0
Were did you download the twrp img from? I download mine from https://dl.twrp.me/shamu/ Once i downloaaded it i rename it to recovery.img
I use cmd on laptop andhook up the phone, then run adb reboot bootloader followed by fastboot flash recovery recovery.img, then i use the volume keys to get into twrp, swipe to allow changes and make changes to settings. Then reboot into rom.
Click to expand...
Click to collapse
That is pretty much what I have been doing. The only difference is, the first time I did this (before I realised it wasn't working), I rebooted from adb and I did see the swipe to allow changes. But since then if I boot from abd or boot from the bootloader, I don't see the TWRP option to swipe to allow changes anymore.
I wonder if it's because the data is encrypted (standard on a N6?)
I checked the box to not show the swipe to allow modification. I have never decrypted my phone and twrp sticks. So not sure why yours isnt sticking.
TMG1961 said:
I checked the box to not show the swipe to allow modification. I have never decrypted my phone and twrp sticks. So not sure why yours isnt sticking.
Click to expand...
Click to collapse
Well the first time I did it I saw that message about allow modification and I agreed. Never seen it again.
The point of installing TWRP was to install a custom ROM. I wonder if I load the ROM image into the phone first, install TWRP and get into the first time, which I can, then install the ROM would that work?
lchiu7 said:
Well the first time I did it I saw that message about allow modification and I agreed. Never seen it again.
The point of installing TWRP was to install a custom ROM. I wonder if I load the ROM image into the phone first, install TWRP and get into the first time, which I can, then install the ROM would that work?
Click to expand...
Click to collapse
After using fastboot to flash TWRP, use the volume and power buttons​ to boot into TWRP, and allow modifications, then make a backup and reboot system. Go back to recovery and if all is well, then flash your ROM. Make sure you've got your TWRP issue fixed first though.
The same thing keeps happening to me. I can't seem to make twrp stick. I'd really appreciate some help.
Depending on what your doing, typically you have to manually boot into recovery after flashing twrp (from fastboot), don't use fastboot reboot xxxx. Use the power/volume key combo to reboot. Then accept either system modification or flash a systemless root solution. This will enable custom recovery to "stick". Otherwise, stock android will overwrite recovery on boot.
The TWRP thread has discussions about this. Starting at post 1044 should help.
mrcreativity said:
The same thing keeps happening to me. I can't seem to make twrp stick. I'd really appreciate some help.
Click to expand...
Click to collapse
Is your device encrypted before you flash TWRP?
Yes it is encrypted.
Anyway, I tried all the various methods and combinations but ended up going back to stock recovery. What worked was flashing SU after TWRP.
I'm running pure nexus now and enjoying it.

Missing Factory boot menu / factory mode menu on Roidmi2 (WT86047)

As described here (https://forum.xda-developers.com/showpost.php?p=73658433&postcount=1883) I installed the LineageOS 14.1.
But since then pressing Volume Up + Power buttons doesn't bring me to the factory boot menu anymore (in which I could statt TWRP), it stucks in the Mi-boot logo.
I already reflashed the ROM again and the current TWRP via fastboot but also via TWRP itself, but the problem still persists.
I can only acces TWRP if I start it via the TWRP app (and reboot) or via fastboot "from outside" (fastboot boot recovery.img).
Any idea how to fix it? Is there a factory recovery image fot the WT86047?
chaosp said:
As described here (https://forum.xda-developers.com/showpost.php?p=73658433&postcount=1883) I installed the LineageOS 14.1.
But since then pressing Volume Up + Power buttons doesn't bring me to the factory boot menu anymore (in which I could statt TWRP), it stucks in the Mi-boot logo.
I already reflashed the ROM again and the current TWRP via fastboot but also via TWRP itself, but the problem still persists.
I can only acces TWRP if I start it via the TWRP app (and reboot) or via fastboot "from outside" (fastboot boot recovery.img).
Any idea how to fix it? Is there a factory recovery image fot the WT86047?
Click to expand...
Click to collapse
Volume Up + Volume Down + Power Buttons
That helps to get into TWRP during boot. Thank you!
But how abot the original factory mode menu? Is it gone with the current TWRP on all Roidmi2 devices or just on mine?
chaosp said:
That helps to get into TWRP during boot. Thank you!
But how abot the original factory mode menu? Is it gone with the current TWRP on all Roidmi2 devices or just on mine?
Click to expand...
Click to collapse
Factory Mode Menu is exclusive to MIUI ROMs or ROMs who include the files or partition of FMM (correct me if I'm wrong), TWRP has nothing to do with FMM missing. Basically, devs of Redmi 2 custom ROMs don't include FMM, and LineageOS (you flashed it) certainly doesn't include FMM. So if you want FMM, better stay stock, or find a way to build a flashable zip that enables/install FMM in any ROM, regarding stock or custom.
Umm.. by Factory Mode Menu, are you talking about the menu that can do HW tests? or are you talking about stock recovery?
Just do the fastboot method, and it'll come back. I even flashed a custom MIUI (xiaomi.eu's Custom MIUI ROM) via TWRP and factory mode menu exist in it. Just to make sure, if you are going to flash xiaomi.eu's CusMIUI ROM, I suggest you to backup your efs and modem partition (modem-firmware) before flashing it, because installing that ROM flashes firmware's too, in some cases, the phone couldn't detect the SIM card, or signal lost because of incompatible bootloader firmwares. If you're familiar in editing updater-script, trying deleting the rows that flash firmware, and make sure to delete the firmware files too inside the zip. (<- Extra info, just incase, I don't want to be blamed for these type of problems)

Redmi 4X bootloop after installing TWRP?

Hi,
I'm having a bit of trouble. I had a brand new Redmi 4X, and I was advised to install TWRP, root it, and install the Xiaomi.eu rom until LineageOS is released. I unlocked the bootloader, flashed TWRP, managed to get into it once and now I can't do it again. When TWRP loaded it asked me for a password for decryption but it let me just skip it it seems (not sure if that is the problem) but now I can't boot normally, I can't boot into recovery, but fastboot seems to work okay. How do I go about fixing this?
I've tried reflashing TWRP but I still can't get to it, and I don't really know enough about this stuff to know where I've gone wrong.
UPDATE - I think this is to do with dm-verity and having the stock kernel installed. Now it's too late to undo what I've already done, so I hope to god that someone knows how to fix this.
UPDATE - Right, the problem is solved I think. I had to do an awful lot of googling, and I'm not entirely sure what it was specifically that fixed it. But I found a guide that taught me the fastboot command "fastboot boot twrp.img" which saved the day. Even when my phone wouldn't let me into recovery, it allowed me to flash a no-verity.zip which i think is what allowed me to boot, and it allowed me to flash superSU.zip and then the ROM I was aiming for. And now I've booted into the ROM successfully and hopefully I am rooted and all is well. Plus I can access TWRP as normal now.
Any help would be greatly appreciated
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
brljak83 said:
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
Click to expand...
Click to collapse
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
brokemyG2 said:
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
Click to expand...
Click to collapse
Hii
I just have been reading about this bootloop
Go over here and read all of the 6 pages..will not take much time but could help you out much
https://forum.xda-developers.com/xiaomi-redmi-4x/development/official-twrp-3-2-1-0-xiaomi-redmi-4x-t3718217
Hey, I have exactly the same problem. Latest stock rom, flashed twrp in fastboot and got into the boot loop. Nothing works. I can only enter fastboot. What exactly did you do then? What is this no-verity.zip? I can't find anything about it.
I had a problem
I unlocked bootloader then installed redwolf recovery and took a nandroid backup. After that i rebooted to system but stuck into bootloop, could not boot to recovery, could not boot into system, So the only thing worked was that i flashed fastboot rom with mi flasher. And syccessfully rebooted to system with bootloader locked and stock recovery. So, if anyone have same problem you can do the same. How do i install recovery safely again? Should i use TWRP only? Should i flash v3.1.0 with lazy flasher or v3.2 directly without lazy flasher? I don't want to stuck into bootloader again, have to get all data deleted.

Categories

Resources