Related
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
i know how you feel! i bought them when i got my hd2 and i got the top two-thirds of the protector on perfect but then the bottom third somehow got dust underneath, it really not that bad when the screen is on but its still annoying. cant wait to get my invisibleshield on it tho!
order this, the maximum protection from zagg....
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
I used invisishield on my ipod. Great stuff, but hard to get on perfect. 3 parts for a curved back and front only covers the LCD part? The front part sounds so unlike them. They normally have it going round buttons and everything.
But it's like putting tint on. You need to have a liquid to make slide just right.
i used invisible shield on my iphone, and it was fully protected. It did add grip to the device which i liked. Anyways, the maximum protection shield covered more than the normal full-body shield. It'll cover not only the LCD screen but all spaces around the hardware buttons and well as the speaker.
starstreak said:
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
Click to expand...
Click to collapse
I also got these same screen protectors and was dissapointed when it did not cover the entire screen.
Trick to putting on screen protectors.
1.) Make sure the screen is completely clean of all smudges etc.
2.) Use a can of air duster to remove any small dust particles that might be stuck on the phone. If you don't have that then just take a piece of tape and remove any dust particles or dirt from the screen. This is the most important part!
3.) Line up the screen protector on the screen where you want to place it.
4.) Peel back the backing of the screen protector as you lay the screen on the device. Start from the top of the device and work your way down. If need be take out a credit card or another hard piece of plastic of some sort to push out any air bubbles that may occur as you lay down the screen protector.'
5.) Enjoy a job well done.
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
My TMOUS HDC HD2 is definitely glass.
I didn't bother to use a screen protector (didn't even know there was one supplied)...it isn't necessary on a glass screen.
Its very hard to scratch glass...you would need a very sharp object, made out of a very hard material (harder than glass), applied with a lot of pressure. I've had my iPhone for 3 years, and the glass is flawless on it. The aluminum housing is scratched, dented, and dinged up, and the LCD panel has a little bit of bruising on the top left corner BEHIND the glass...but the glass itself is immaculate.
Apple actually pulled the screen protectors off the shelves from the Apple store because they felt they were unnecessary..and frankly anyone who pays for one on the HD2 or iPhone wasted their money.
You'll actually see more imperfections on the screen by applying a screen protector...they have a tendency to attract dust, bubble up, and flat out get dirty. The only maintenance you need to do on a glass screen is polish out smudges and finger prints.
The biggest peril to glass touch screens is cracks from falls....and if your HD2 suffers a big enough impact, a screen protector or 'invisible shield' won't do squat to keep it from cracking
glass or plastic..either way.. i was soooooooooooo confident i wouldnt scratch mine, until about a minute ago when i was in the process of wiping the glass(plastic) screen before putting on a screen protector, i noticed a little scratch...great. Should've put on a protector sooner...
From now on, I willl be putting on a screen protector unless the screen are made out of crystal sapphire or something..
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
We actually do not get an included screen protector. Only the black gel case, which imo is quite crappy... loose and flimsy
http://forum.xda-developers.com/showthread.php?p=6117793#post6117793 Check out oy instillation of the Invisible shield if you are considering buying one. I bought the Maximum Protection and it covers almost everything besides for around the buttons on the bottom, volume rocker, camera, Micro USB/ 3.5 Headphone jack, and the finger nail grove on battery cover. I also would like to note that my TMOUS HD2 did not include any screen protectors in the box.
Sorry imo I have to disagree with you about the included gel being loose mine fits quite snugly and until my zagg comes in I prefer to keep it in the gel...not as slick & keeps the screen(when face down) off the flat surface.
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
MAMeingast said:
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
Click to expand...
Click to collapse
I agree, I used to do this back in the day before Zagg came around. It works great.
I have read with other products people use a drop or water/soap water before applying a screen protector. Has anyone used this method on this device? i am concerned that the water will somehow ruin the device. I know it's only a drop or 2 but wanted to get some feedback first before i tried it.
Hi everyone,
I'm planning on purchasing the Nexus 5X in a few days, just need to find the right accessories for it (cables, cases, screen protectors).
I was wondering if anyone can recommend a screen protector that has a cutout for the proximity sensor.
Also, I seriously only found out today there is such a thing as tempered glass. After researching a bit, I learned of it's pros (actually protects your screen if the phone falls) and it's cons (can crack easily for no reason ,poses somewhat of a health risk if breaks).
Pros: http://temperedglassscreenprotector.org/
Cons: http://www.clear-coat.com/blog/why-we-dont-sell-tempered-glass-screen-protectors/
Strangely, all the screen protectors I find on Amazon are tempered glass.
So, which one should I buy (tempered or plastic), and can you recommend a specific screen protector?
I wouldn't say they crack easily, but that'll depend on a bunch of variables. All I can say is it looks good and feels much nicer than the PET/non tempered glass screen protectors. Spigen is a good brand to go with.
Read the thread below:
http://forum.xda-developers.com/showthread.php?t=3214188
I recommend the skinomi screen protector, it's not glass. It's the kind that feels like rubber and applied via water. I love these.
How you apply it with water? They can get to te mic's, no? You have safe way to do that?
Hi, Im very pleased with Nexus 5X Screen Protector, Spigen® [Crystal] Full HD, I used to have it on my Nexus 5 and I was so satisfied that I bought it again for my N5x. Feels like glass, perfecly cutted you have 3x screen protector included, dust removal and positionning tool to hlelp perfect use. At least two times saved my screen on my old nexus 5. And almost nobody noticed that Im using a screen protector....
I've played around with a few screen protectors over the years, including some tempered glass ones. I can show you some reviews I've written, if you're interested.
Most of the cheap glass options are /not/ multicoated. What that means is, while they might be very difficult to scratch, they will cause some reflections, way more than the bare screen. Also, one of the coatings applied in modern multicoating is an oleophobic coating. That means a layer which helps the glass reject oils, including the skin oils on your fingertips. So applying a glass screen protector usually means you'll have to clean your screen way more often, and also that it will be considerably more difficult to actually clean the screen.
If you're dead-set on a screen protector, I highly recommend you find yourself a multicoated option. These will be no less than $20 even on sale. They can be $30+ normally.
Personally, I trust Corning Gorilla Glass 3 as sufficient in this generation. You might get a scratch or two over a few year span, but, virtually everything your phone will meet won't be hard enough to damage the glass.
Pandages said:
I've played around with a few screen protectors over the years, including some tempered glass ones. I can show you some reviews I've written, if you're interested.
Click to expand...
Click to collapse
I would love to.
Pandages said:
Most of the cheap glass options are /not/ multicoated. What that means is, while they might be very difficult to scratch, they will cause some reflections, way more than the bare screen. Also, one of the coatings applied in modern multicoating is an oleophobic coating. That means a layer which helps the glass reject oils, including the skin oils on your fingertips. So applying a glass screen protector usually means you'll have to clean your screen way more often, and also that it will be considerably more difficult to actually clean the screen.
Click to expand...
Click to collapse
I don't really understand, you're talking about tempered glass screen protectors?
Pandages said:
If you're dead-set on a screen protector, I highly recommend you find yourself a multicoated option. These will be no less than $20 even on sale. They can be $30+ normally.
Click to expand...
Click to collapse
Can you give me some examples? Are the products recommended to me here (like the Spigen) multicoated?
elyashiv1994 said:
How you apply it with water? They can get to te mic's, no? You have safe way to do that?
Click to expand...
Click to collapse
You apply a thin layer them squeeze out the excess. It's incredibly easy to retry if you set it wrong the first time. You can push the water away from the mic and speaker and use a cloth to dab up any excess water.
buru898 said:
You apply a thin layer them squeeze out the excess. It's incredibly easy to retry if you set it wrong the first time. You can push the water away from the mic and speaker and use a cloth to dab up any excess water.
Click to expand...
Click to collapse
There is something that I can put in the mic to seal it? I don't want to take risk(especially when you have holes in top and bottom)
glass screen protector http://dx-box.com/nillkin-amazing-h-pro-anti-explosion-tempered-glass-screen-protector.html
I've been using glass screen protectors since May 2014. I swear by them. They don't crack easily like Clear Coat claims. I've only had to replace them twice. Once because an edge got pulled up months later so there was a air gap on one side. The second time, it actually did crack but that was after falls with a TPU case on. As many others have stated, with tempered glass screen protectors, that will crack before the actual glass of the screen does. And good ones don't shatter into little pieces like Clear Coat says. On the two replacements, I broke them fully and the pieces stay together. Also I really like the glass feel. Not sure how non-glass screen protectors feel though. Back when invisibleSHIELD was popular, that tacky feel wasn't nice.
Sent from my Nexus 5X using Tapatalk
Jill McAuliffe said:
glass screen protector http://dx-box.com/nillkin-amazing-h-pro-anti-explosion-tempered-glass-screen-protector.html
Click to expand...
Click to collapse
Thanks. Does it cover the proximity sensor?
Even though the image shows it is, some companies say that despite the image, their product does not cover the sensor.
EeZeEpEe said:
They don't crack easily like Clear Coat claims. ... And good ones don't shatter into little pieces like Clear Coat says.
Click to expand...
Click to collapse
Yeah it was obvious Clear Coat exaggerated on purpose... Still, I wanted to check with people here what they think.
EeZeEpEe said:
As many others have stated, with tempered glass screen protectors, that will crack before the actual glass of the screen does.
Click to expand...
Click to collapse
You mean, they will break before the screen glass when the phone falls?
A question for everyone... Is there a problem, with tempered glass of course, with seeing the screen outdoors when it's sunny, even in full brightness?
TheeWolf said:
Yeah it was obvious Clear Coat exaggerated on purpose... Still, I wanted to check with people here what they think.
You mean, they will break before the screen glass when the phone falls?
A question for everyone... Is there a problem, with tempered glass of course, with seeing the screen outdoors when it's sunny, even in full brightness?
Click to expand...
Click to collapse
Exactly. I think of it similar to a crumple zone in a car. It will absorb some of the force before the phone's glass does. Now of course, with a great amount of force like dropping it from 10 feet or throwing it, I'm sure both the screen protector and the phone's glass would break. Regular accidental drops should work out the way I described.
As for outdoor visibility, there's no noticeable decrease in brightness or increase in glare. All of the manufactures usually advertise something like 99.9% transparency.
Here's an interesting tempered glass screen protector review. Cued up exactly on the drop test to rocks and removal:
https://youtu.be/UnvC6EERMyI?t=2m21s
Keep in mind that plastic protects better than glass and plastic does not need to be replaced where as most drops will break a glass protector. It is made from a thin easily breakable material after all.
The reason to pay roughly 10x as much for glass is because it feels much nicer on your finger. Plastic can also cause rainbow like reflections and can be a bit harder to apply than one solid piece.
However glass costs a lot more upfront and in the long run to replace. A plastic protector is about $1 and if applied properly won't ever need to be replaced.
bblzd said:
Keep in mind that plastic protects better than glass and plastic does not need to be replaced where as most drops will break a glass protector. It is made from a thin easily breakable material after all.
The reason to pay roughly 10x as much for glass is because it feels much nicer on your finger. Plastic can also cause rainbow like reflections and can be a bit harder to apply than one solid piece.
However glass costs a lot more upfront and in the long run to replace. A plastic protector is about $1 and if applied properly won't ever need to be replaced.
Click to expand...
Click to collapse
Yes plastic ones don't break break or need to be replaced but I don't think they provide the same impact protection in absorbing drops. You'll probably have a screen broken under the intact plastic screen protector.
EeZeEpEe said:
Yes plastic ones don't break break or need to be replaced but I don't think they provide the same impact protection in absorbing drops. You'll probably have a screen broken under the intact plastic screen protector.
Click to expand...
Click to collapse
I have no background on the subject but just thinking about it logically, I don't think glass can be as protective as plastic.
For instance RhinoShield only offers plastic screen protectors. Their test videos show how easily GG would break from certain impacts and how much plastic protects it. Even the best tempered glass can only hope to be as strong as GG.
My basic understanding of the situation is glass protectors work because it breaks and saves the screen underneath, where as plastic works by actually strengthening the glass itself.
However for each time the glass protector breaks and needs to be replaced, the plastic would keep on trucking.
I think the misunderstanding arises when a user drops their phone with a glass protector and it breaks thus "saving" their screen. But what if they had plastic? Would the screen of broken then? What if they had no protector? We can't say for sure what the results would have been. However to the user that is a clear indication of the glass protector working, where as I would say that's only a clear indication of the glass protector breaking easily.
bblzd said:
However to the user that is a clear indication of the glass protector working, where as I would say that's only a clear indication of the glass protector breaking easily.
Click to expand...
Click to collapse
Right. That's how I see it as a user. Also, the clarity, feel, and scratch resistance can't be matched by plastic.
Sent from my Nexus 5X using Tapatalk
I've actually dropped my 5x naked just once so far and got lucky without any cracks, but I do believe if I had a glass SP it would've broken. In the end I think it's luck and a good case that will protect from a bad drop as the screen protector is mainly for scratch protection. I've kept my glass SP as a backup in case the factory oleophobic coating stops working as effectively.
Here.
IQ Shield LiQuidSkin - Huawei Nexus 6P Screen Protector (2015) & Warranty Replacements - HD Ultra Clear Film - Protective Guard - Extremely Smooth / Self-Healing / Bubble-Free Shield
They also have glass. Check em both.
http://www.amazon.com/B016CKR3QA/dp...055&sr=8-2&keywords=nexus+6p+screen+protector
My case is creating tiny scratches on the screen, just to make everyone aware the plastic around the "S" window is the culprit.
Maybe Elephone could consider changing the design of the case to resolve this issue.......
Duts001 said:
My case is creating tiny scratches on the screen, just to make everyone aware the plastic around the "S" window is the culprit.
Maybe Elephone could consider changing the design of the case to resolve this issue.......
Click to expand...
Click to collapse
got same issue... i placed the glass protector... now is the glass protector that take scratches.... btw i dont suggest anyone to buy the original elephone cover... is just a piece of **** useless ... and made very bad ... the ingenier behind must be a complete idiot!
I bought an original flip case but it doesn't close properly and the phone doesn't seem to fit in 100%.
Trying to use the side controls with the official flip case drove me nuts. Now using the silicone cover that came with the phone along with tempered glass screen instead - a massive improvement
The screen glass is not scratch resistant ... poor.
I have discarded the flip case, with the window, for three reasons.
1. The plastic surround to the window was scratching my screen , the outline of the window has been etched into the glass.
2. It is much easier to use the clear plastic backing case, for answering the phone, general use and removing the card tray,
The flip case is a very tight fit.
3. I wonder whether the magnet in the case, which is in very close proximity to the card tray, is affecting the SD card and causing dropping of the connection and resultant corruptions.
Since I started using the clear plastic case, I have had no SD card problems.
I had issues with the tempered glass and the silicone cover.
Switched from always using the original flip cover. It was too annoying, the volume plastic thing broke off and had to use some other plastic bit in there. Also in a car mount its just in the way.
The tempered glass i had on was damaged putting on the plastic case, had one in spare and so far that works. Ordered some other tempered films just in case.
I have tried many and finally found one that actually fits. Until now the best one I have seen is the non glass protector made by Skinobi (for those that like plastic ones use it). However in the glass department they all sucked. The Qoosea one fit but it's about as cheap as you can get construction wise. It's curved but it only has a small amount of basic adhesive along the edges. So basically pocket lint can get under the screen and get stuck there. Also since it doesn't fully sit on the screen sometimes using the screen itself can be a hassle due to poor touch detection. Well all I can say is thank god Top Ace came out with one recently and actually got it right.
It's curved glass, plenty of adhesive on the side that counts and by god it actually fits perfectly. Things line up where they are supposed too. Anyway figured this deserved it's own post since finding a glass protector for this phone can be a pita at times due to the curved edges. Posted a link below, hope it helps. https://www.amazon.com/gp/product/B01M3MZQTK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I got mine yesterday and I can confirm that yes, this one actually fits great. I bought 2 in case they don't make them anymore when the first one eventually breaks.
From the pictures and one of the latest reviews it looks like this screen protector covers up the light sensor. Are there any completely clear screen protectors that fully covers the front?
Just read one of the comment said it covers the sensor that the phone is unable to turn on the screen automatically during a call when you put it away from your face. Anyone can confirm it?
I bought one on Ebay and it arrived and had curvy edges, but the idiots had sent me one for the full-size Xperia X even though it was in a packet marked X Compact. Way too big. Now I have to fight for a refund.
itandy said:
Just read one of the comment said it covers the sensor that the phone is unable to turn on the screen automatically during a call when you put it away from your face. Anyone can confirm it?
Click to expand...
Click to collapse
Mine had the sensor cut out and everything was right where it was supposed to be. Maybe he got the wrong one not sure. I went with the black one and it was fine.
Halftrack said:
Mine had the sensor cut out and everything was right where it was supposed to be. Maybe he got the wrong one not sure. I went with the black one and it was fine.
Click to expand...
Click to collapse
Anyone know of a UK source for these or a seller who will post to the UK on Ebay/Aliexpress etc?
I too bought one that only sticks to the edge of the phone and it's already got a piece of dust underneath it! I love being able to swipe from the edge with the curved edges and I love the longevity of glass screen protectors, but it's horrible to use as it's just floating a bit off the surface of the phone and makes a click noise/feel when I tap. I asked a load of Ebay sellers and they all said their glass curved screen protectors only stick around the edge of the phone.
Thanks.
Hi,
I found this one on Devilscase when I checked the Aluminium bumber.
http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5258&list=class It's curved and seems to have the adhesive on the full screen (except the edges).
Did anyone tried it already out?
Cheers from Erfurt/Germany
mindaffecter said:
Hi,
I found this one on Devilscase when I checked the Aluminium bumber.
http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5258&list=class It's curved and seems to have the adhesive on the full screen (except the edges).
Did anyone tried it already out?
Cheers from Erfurt/Germany
Click to expand...
Click to collapse
Based on them saying all over the website "Please be noted the adhesive is visible on the edge of CURVED Glass Protector" I imagine these ones only have glue on the edges too.
If anyone is wondering, I've attached a photo of what happens if you use a generic glass Ebay curved screen protector that only has glue on the very edges for a fortnight! Lots of dust has crept in through the speaker holes etc - the white dots showing are all dust UNDER the screen protector. I'm going to buy a plastic one that will stick properly.
I bought this: https://www.amazon.com/dp/B01N8XMXGB
Seems like it just ran out of stock though.
edit: I asked the seller and they said they will not restock it, so I guess this will be the last time you'll see it.
mindaffecter said:
Hi,
I found this one on Devilscase when I checked the Aluminium bumber.
http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5258&list=class It's curved and seems to have the adhesive on the full screen (except the edges).
Did anyone tried it already out?
Cheers from Erfurt/Germany
Click to expand...
Click to collapse
I did. I paired it with the aluminum bumper and while the bumper is top quality as usual with devilcase products, I can't say the same for the screen protector.
The screen protector does fit perfectly but it collects dust behind it after few weeks and the responsiveness and consistency of the touchscreen are compromised.
I've been looking for an alternative to buy in Europe but found none. Topace is not an option as is in stock only on Amazon USA. If anyone has suggestions it would be greatly appreciated.
SANGER_A2 said:
I bought one on Ebay and it arrived and had curvy edges, but the idiots had sent me one for the full-size Xperia X even though it was in a packet marked X Compact. Way too big. Now I have to fight for a refund.
Click to expand...
Click to collapse
I had the same problem and got refunded. Ordered from different seller and got the correct sized one. The item itself is bad. It feels plastic, touch is not always responsive and swipe gesture for opening menu drawer is hard. I need to really press the edge before doing the slide. Screen feel more distance and it feels there are separation between the protector and the screen.
I replaced it with a generic plastic screen protector which actually feels better, easier to make slide gesture, seems more seamless. The ebay curved screen protector is really that bad. I am going to keep using the plastic one and cut a new one to fit it more properly. I also need to check how to prevent it is being lifted up accidentally from the dangling side. I can stand the dust on the dangling side, but i hate when it is lifted up and the lint is actually below the screen protector.
My experience
This is the reference for my second e-bay cover it does not have dust and has lasted much longer than my first that did.
My recollection is that there is adhesive everywhere.
232332938786
sappermajor said:
This is the reference for my second e-bay cover it does not have dust and has lasted much longer than my first that did.
My recollection is that there is adhesive everywhere.
232332938786
Click to expand...
Click to collapse
No. You are wrong. I bought one based on your recommendation and it's just another rubbish one that only only has glue in thin strip round the edges that will allow dust to creep in the speaker/camera holes and scratch the screen. More negative feedback to leave!
Why do not manufacturers produce a curved screen protector that's made properly!?! The glue can't be that expensive! [emoji36]
Sent from my F5321 using Tapatalk
Just wondering the sticky residue from a camera protector would damage the painted surface of the rear cameras on the S21 Ultra?
Jerryrig shows that this painted surface scratches pretty easily and just wondering if using a camera protector is a good idea or not?
Seen several people saying that camera protectors are hard to remove from the Ultra, broke, cracked and damaged the painted area trying to remove.
Have the Whitestone dome ones coming and think I'll hold off installing these.
felloffthetruck said:
Seen several people saying that camera protectors are hard to remove from the Ultra, broke, cracked and damaged the painted area trying to remove.
Click to expand...
Click to collapse
I was looking at the customer reviews for the LK, ESR, Spigen, and amFilm S21 Ultra camera screen protectors and I did not find anyone complaining about the damaged painted area when removing the protector. Where did you find these comments? I found some complaints about the blurriness of the photos, though.
aslg said:
I was looking at the customer reviews for the LK, ESR, Spigen, and amFilm S21 Ultra camera screen protectors and I did not find anyone complaining about the damaged painted area when removing the protector. Where did you find these comments? I found some complaints about the blurriness of the photos, though.
Click to expand...
Click to collapse
Seen several different ones on Amazon reviews. Here is one from the AmFilm camera protectors:
Avi lupo
1.0 out of 5 stars Unless you want to ruin your camera DO NOT BUY
Reviewed in the United States on January 28, 2021
Color: BlackVerified Purchase
These things are near impossible to take off. I misplaced mine and wanted to try reapplying a new one. While attempting to take it off it shattered into a million piece by piece, while still being glued onto my camera. Wanted to protect my camera but instead I had it scratched by the shattered protector. Took me over an hour to get it completely off, and by then the damage had already been done BUYER BEWARE
It already has a built in factory lens/camera protector. Nothing else other than a good case with a raised cam module guard is needed.
My 10+ is nearly a year and a half old. I live in a desert town; wind, sand, dust and grit. Zero damage to the plastic factory cam protector.
I use a Zizo Bolt case with a raised cam guard (do not use a case cam hole as a finger grip to take it out of your pocket!).
All I do is avoid touching it except to clean it occasionally with a dry microfiber cloth.
Just keep your fingers* off of it and you'll be fine.
They're replaceable anyway...
*dry finger/palms are abrasive. Enough so as to be able to polish glass. Any grit or sand on your finger can easily mar the surface.
I agree that the amfilm has very, very strong adhesive. It was hard to remove but thankfully it didn't crack and the paint didn't come off.
It caused condensation due to the gap between the protector and the lens glass so I had to take it out. And if you do want a camera protector, make sure the are cutouts for the camera holes. Kinda negates the protector but I suppose that's if you want to protect the metal frame.
I posted in the other thread, but mine shattered because of the adhesive and caused light scratches on the metal.
It's different from past generations since these camera bumps are metal. Old tempered glass adhesive isn't strong enough and they're using stronger stuff.
felloffthetruck said:
Just wondering the sticky residue from a camera protector would damage the painted surface of the rear cameras on the S21 Ultra?
Jerryrig shows that this painted surface scratches pretty easily and just wondering if using a camera protector is a good idea or not?
Seen several people saying that camera protectors are hard to remove from the Ultra, broke, cracked and damaged the painted area trying to remove.
Have the Whitestone dome ones coming and think I'll hold off installing these.
Click to expand...
Click to collapse
Possible, I do not know these products.
But as some one else said, the glass itself very probably don't need protection. The aluminium though, yeah.
I plan to get a dbrand skin which is just a sticker that will cover the metal part, and a case as well for when on a trip (remember those?) and such.
In my opinion, that should be enough.
I bought the whitestone protector, didn't think about taking it off...
felloffthetruck said:
Seen several different ones on Amazon reviews. Here is one from the AmFilm camera protectors...
Click to expand...
Click to collapse
Thanks! If I understood it right, the scratches on the aluminum camera housing were not caused by the strong glue but by the glass shards (glass is harder than aluminum).
I was thinking to protect just the camera housing with a dbrand camera skin. The black carbon fiber skin looks very nice on the phantom black S21 Ultra. It is also very cheap.
Did anyone have any issue removing dbrand skins from a metal camera housing?
These things are close to difficult to take off. I lost mine and needed to have a go at reapplying another one. While endeavoring to take it off it broke into 1,000,000 piece by piece,if you want while as yet being stuck onto my camera. Needed to safeguard my camera yet rather I had it but if you want to paint the mobile you can also use floor paint to paint the mobile and scratched by the broke defender. Took me more than an hour to get it totally off, and by then the harm had proactively been done Purchaser Be careful....
DaniellaAmato87 said:
These things are close to difficult to take off. I lost mine and needed to have a go at reapplying another one. While endeavoring to take it off it broke into 1,000,000 piece by piece,if you want while as yet being stuck onto my camera. Needed to safeguard my camera yet rather I had it but if you want to paint the mobile you can also use floor paint to paint the mobile and scratched by the broke defender. Took me more than an hour to get it totally off, and by then the harm had proactively been done Purchaser Be careful....
Click to expand...
Click to collapse
See my above post. The less you screw around with the builtin factory protector the better off it will be.