ClockWorkMod Recovery 6.0.3.7
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working - Everything
Download from DevDB
Warning : Only works on cyanogenmod mod based roms, IT WON'T WORK ON STOCK BASED ROM'S, i have just warned you !
Installation :
put zip in sd card.
reboot into cwm
install zip > cwm-6.0.0.7
Sources :
Device Source
Recovery Source
Kernel Source
Credits :
Koush
Cyanogenmod
androidarmv6 Team
XDA:DevDB Information
ClockWorkMod Recovery 6.0.3.7, a Tool/Utility for the Samsung Galaxy Ace S5830
Contributors
ankur850
Version Information
Status: Stable
Stable Release Date: 2013-10-15
Created 2013-10-15
Last Updated 2013-10-16
Reserved
First!
Testing it Now !
Recovery works(of course ). Really very quickly it gets backup. Even so, I will use the PX
Touch based version?
Good job!
Thanks!
:good:
AWESOME WORK BRO.
REQUEST:-
If possible, kindly port latest TWRP recovery for our ACE.
Thanks for this recovery.
GOD BLESS & TC.
CHEERS.
Yesterday I flashed TWRP from the forum and bricked my device (not for recovery, but I wanted to return to CWM via odin ;p - not hard brick)
Sent from my GT-S5830 / Wysłane z mojego GT-S5830
Where is the download link? :laugh:
aleeexxhh said:
Where is the download link? :laugh:
Click to expand...
Click to collapse
On the top of page there is a black bar and there is a dowload tab. I didn't know that too
Not working for me. I flashed your recovery and rebooted my phone in recovery mode and appears a completely blue screen. Then if I press Home button the blue screen disappears and the phone reboots in normal mode.
Now that I can't boot in recovery mod I can't flash anything and I should flash my phone with Odin but I haven't windows.
Who can help me?
rapkiller91 said:
Not working for me. I flashed your recovery and rebooted my phone in recovery mode and appears a completely blue screen. Then if I press Home button the blue screen disappears and the phone reboots in normal mode.
Now that I can't boot in recovery mod I can't flash anything and I should flash my phone with Odin but I haven't windows.
Who can help me?
Click to expand...
Click to collapse
are you sure you flash recovery in galaxy ace ? Allow it some seconds to boot, after blue screen it blink black screen two or three times. Recovery working fine.
GalaxyAce User said:
:good:
AWESOME WORK BRO.
REQUEST:-
If possible, kindly port latest TWRP recovery for our ACE.
Thanks for this recovery.
GOD BLESS & TC.
CHEERS.
Click to expand...
Click to collapse
Your Request accepted, successfully ported TWRP 2.6.
Will post it.
ankur850 said:
are you sure you flash recovery in galaxy ace ? Allow it some seconds to boot, after blue screen it blink black screen two or three times. Recovery working fine.
Click to expand...
Click to collapse
Same for me,,, only BLUE SCREEN,, whats wrong ?? its blink black screen before blue screen...
any solutions ????
---------- Post added at 07:18 PM ---------- Previous post was at 07:12 PM ----------
rapkiller91 said:
Not working for me. I flashed your recovery and rebooted my phone in recovery mode and appears a completely blue screen. Then if I press Home button the blue screen disappears and the phone reboots in normal mode.
Now that I can't boot in recovery mod I can't flash anything and I should flash my phone with Odin but I haven't windows.
Who can help me?
Click to expand...
Click to collapse
install cwm manager.apk,, and flash your recovery ..... work for me.. :good:
press thanks if i help you
Oh, one question:
Can I flash it from stock recovery? Or I must use cwm v4/v5 (px also works )
ankur850 said:
Your Request accepted, successfully ported TWRP 2.6.
Will post it.
Click to expand...
Click to collapse
:good:
THAT'S AWESOME NEWS.
THANKS FOR ACCEPTING MY REQUEST.
THANKS ONCE AGAIN.
---------- Post added at 07:00 PM ---------- Previous post was at 06:58 PM ----------
BRO You & your team is awesome.
Thanks for your amazing work for our ACE.
CHEERS.
ankur850 said:
are you sure you flash recovery in galaxy ace ? Allow it some seconds to boot, after blue screen it blink black screen two or three times. Recovery working fine.
Click to expand...
Click to collapse
I flashed recovery in Galaxy Ace s5830. I followed your suggestion and waited for about one minute with the blue screen but nothing happened!
I've never had this kind of problem with my phone. I hope I can solve it without Odin.
What if I use CWM Manager to solve this?
---------- Post added at 02:46 PM ---------- Previous post was at 02:44 PM ----------
Rhievaldo said:
Same for me,,, only BLUE SCREEN,, whats wrong ?? its blink black screen before blue screen...
any solutions ????
---------- Post added at 07:18 PM ---------- Previous post was at 07:12 PM ----------
install cwm manager.apk,, and flash your recovery ..... work for me.. :good:
press thanks if i help you
Click to expand...
Click to collapse
where can I find cwm manager apk?
rapkiller91 said:
where can I find cwm manager apk?
Click to expand...
Click to collapse
from cwm recovery .zip (/system/app)
baran0119 said:
from cwm recovery .zip (/system/app)
Click to expand...
Click to collapse
Do I need to reflash with odin and then use cwm manager or I can use cwm manager with my non-working cwm recovery?
---------- Post added at 05:38 PM ---------- Previous post was at 05:28 PM ----------
Rhievaldo said:
Same for me,,, only BLUE SCREEN,, whats wrong ?? its blink black screen before blue screen...
any solutions ????
---------- Post added at 07:18 PM ---------- Previous post was at 07:12 PM ----------
install cwm manager.apk,, and flash your recovery ..... work for me.. :good:
press thanks if i help you
Click to expand...
Click to collapse
OK!I flashed witch CWM Manager and..........IT WORKS! thank you Rhievaldo! I feared to brick my phone and it didn't happen! wooooo!
does work format sd-ext to ext4 ?
thanks for your work!
tomaasz
Related
This is Cyanogenmod 10.1 for desire C
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
How to install?
Do a FULL WIPE first. Full Wipe means format /system, /data, /cache.
Now flash ROM and then GAPPS through recovery.
After flashing, do NOT reboot phone. Instead POWER OFF the device and boot to bootloader.
Extract the boot.img from rom and flash it using fastboot flash boot boot.img command.
Reboot.
Download Links:
ROM
gapps
Credits:
@Jelly Android
@cute_prince
@dominos_liberty
@penguin449
@for811
any one else? just pm me
reserved
Hello
download link with @Jelly Android *updater-script are up
Testing now
Sent from my HTC Desire C using xda premium
Can you give me bug list too?
dominos_liberty said:
Can you give me bug list too?
Click to expand...
Click to collapse
Course just downloading
---------- Post added at 11:25 PM ---------- Previous post was at 11:03 PM ----------
Shad0wPanda said:
Course just downloading
Click to expand...
Click to collapse
Sorry about this im having trouble flashing boot.img
---------- Post added at 11:39 PM ---------- Previous post was at 11:25 PM ----------
@dominos_liberty
Cant boot stuck on white htc screen shomething wrong with kernel.
hahaha me too i finished my build this morning x) i will test your build and mine and compare bug
for811 said:
hahaha me too i finished my build this morning x) i will test your build and mine and compare bug
Click to expand...
Click to collapse
please can i have some help
Shad0wPanda said:
Course just downloading
---------- Post added at 11:25 PM ---------- Previous post was at 11:03 PM ----------
Sorry about this im having trouble flashing boot.img
---------- Post added at 11:39 PM ---------- Previous post was at 11:25 PM ----------
@dominos_liberty
Cant boot stuck on white htc screen shomething wrong with kernel.
Click to expand...
Click to collapse
You can consult android jelly on how he got booting,
since this rom is not booting I'm requesting moderator on closing this thread, ones android jelly share his build we'll reopen this till then we discuss in the thread in general
dominos_liberty said:
You can consult android jelly on how he got booting,
since this rom is not booting I'm requesting moderator on closing this thread, ones android jelly share his build we'll reopen this till then we discuss in the thread in general
Click to expand...
Click to collapse
Do you think you could me with a porting problem? Please
Shad0wPanda said:
Do you think you could me with a porting problem? Please
Click to expand...
Click to collapse
pm me ur problem
Finally guys we got cm10.1 booting on desire C confirmed by @for811 cheers
download links are on op for those who wants some experimentation
for now there are too many force closes but they will be solved
for811 said:
[/COLOR]
i have goud news for you!! its boot!
but all proces is stoped and it reboot
Click to expand...
Click to collapse
the most important for the moment is to solve all force close process, because the rom reboot about 1min...
I think I know why its happening, can u flash cm10 boot image and see if it boots or not?
We cute_prince were also reset every 1 minute, like he did to fix BoardConfig.mk :cyclops:
saider said:
We cute_prince were also reset every 1 minute, like he did to fix BoardConfig.mk :cyclops:
Click to expand...
Click to collapse
its restting because I forgot to update some video files, I'm publishing a new built and I'm sure it will not reset. And yes one more good news for u guys, your old kernel did not had ion support for graphics where as this kernel does
Testers: here is the link of new build, please report ASAP, http://www.mediafire.com/download/tx0rotc92pxyhxy/cm-10.1-20130620-UNOFFICIAL-golfu-build2.zip
dominos_liberty said:
its restting because I forgot to update some video files, I'm publishing a new built and I'm sure it will not reset. And yes one more good news for u guys, your old kernel did not had ion support for graphics where as this kernel does
Testers: here is the link of new build, please report ASAP, http://www.mediafire.com/download/tx0rotc92pxyhxy/cm-10.1-20130620-UNOFFICIAL-golfu-build2.zip
Click to expand...
Click to collapse
i have reboots
what about force closes? and logcat if possible
Downloading....
EDIT: someone upload it to a faster site?
EDIT2: still getting force close (and reboot)
It is unofficial repack of PhilzRecovery 5 for Galaxy Grand. I made it with 4.2.2 "SER" Recovery Image. Please try and report bugs.
Original Thread : http://forum.xda-developers.com/showthread.php?t=2201860
Download Links
Odin
>https://docs.google.com/file/d/0B_SFFvHY6sAFMVczNi1aTFAwb2M/edit?usp=sharing
Flashable Version Made by @balliboxer Thanks..
>http://d-h.st/joj
Mohanshbhr said:
(1). Some GUI Ratio at Bottom.
Click to expand...
Click to collapse
hello, Thank you for the image !
How did you get the touch resources ?
Edit :
Philz recovery is GPL'ed you are violating the copyright ....please ask permission from Philz (author)
Tested it... recovery works fine... the bottom bar with soft keys needs to be in correc position... also the soft bar at thr bottim dont work... everything else is working fine... more functionalities added which is good.. :good:
---------- Post added at 11:28 AM ---------- Previous post was at 11:26 AM ----------
One small request.... custom kernel with oc possible for 4.2.2 "SER" rom?
chotu222 said:
hello, Thank you for the image !
How did you get the touch resources ?
Edit :
Philz recovery is GPL'ed you are violating the copyright ....please ask permission from Philz (author)
Click to expand...
Click to collapse
actually i made it long time ago and i asked philz to make it for grand but he did not responded so i didnt publish it...
anyways good work!!
k2wl said:
actually i made it long time ago and i asked philz to make it for grand but he did not responded so i didnt publish it...
Click to expand...
Click to collapse
how did you make it ? touch sources with him
Any flashable version for this cwm ? It would be nice if there is.....
Sent from my GT-I9082 using xda premium
chotu222 said:
how did you make it ? touch sources with him
Click to expand...
Click to collapse
non touch version ...
This is way better. Advanced backup is awesome. GUI theming .... the aroma file manager is not functioning but doesnt matter because i have a cwm zip of AFM. And about the touch keys on screen .. who cares if its not working !!!
chotu222 said:
hello, Thank you for the image !
How did you get the touch resources ?
Edit :
Philz recovery is GPL'ed you are violating the copyright ....please ask permission from Philz (author)
Click to expand...
Click to collapse
Lol... Let me download before this gets shut... Nice work mohan though but permission will be good..
To err is human; to forgive is divine
Guys please install this recovery and check every option,, backup restore,, Philz Settings etc,,, i pmed Phil and he said that when we got bug fixed he will add grand to supported devices...
don't download ,, i m going to uplaod new recovery with bottom row fixed
Mohanshbhr said:
don't download ,, i m going to uplaod new recovery with bottom row fixed
Click to expand...
Click to collapse
ok
To err is human; to forgive is divine
New Recovery with fixed bottom bar,, link updated,, @balliboxer bro please make flashable version...
Mohanshbhr said:
New Recovery with fixed bottom bar,, link updated,, @balliboxer bro please make flashable version...
Click to expand...
Click to collapse
Hey i am on aokp rom by k2wl ...philz recovery is not working ...it stops at boot logo
And rom also doesn't boot
Edit:
tried both by odin and flashable zip
chotu222 said:
Hey i am on aokp rom by k2wl ...philz recovery is not working ...it stops at boot logo
And rom also doesn't boot
Edit:
tried both by odin and flashable zip
Click to expand...
Click to collapse
i cant say about aokp because i did not used aokp once,,, i made it with "ser" firmware recovery.img ,, i think its 4.2 recovery image thats why its not working with aokp,, some please verify that its not working with aokp ,,if it got confirmed that its not working with aokp than i will do somthing...
Mohanshbhr said:
i cant say about aokp because i did not used aokp once,,, i made it with "ser" firmware recovery.img ,, i think its 4.2 recovery image thats why its not working with aokp,, some please verify that its not working with aokp ,,if it got confirmed that its not working with aokp than i will do somthing...
Click to expand...
Click to collapse
it is ramdisk issue i think...u can't use 4.2.2 recovery for general use if u want to use aokp ,cm,slim or pa or any other 4.1.2.
i have my version of cwm on ser 4.2.2 but it can be used only with official or leaked 4.2.2 roms and not with general 4.1.2 or aokp /cm.
that is a sole reason i avoided it .
Very nice recovery I'm very happy to have it
Nice recovery..
Please any one post link for aroma file manager.
Stores backup by default on the mobile memory ! Any way to change it to SD card ?
---------- Post added at 07:57 PM ---------- Previous post was at 07:56 PM ----------
Mohanshbhr said:
New Recovery with fixed bottom bar,, link updated,, @balliboxer bro please make flashable version...
Click to expand...
Click to collapse
What bottom bar ? Everything works superbly for me ? What is this issue ?
Mohanshbhr said:
It is unofficial repack of PhilzRecovery 5 for Galaxy Grand. I made it with 4.2.2 "SER" Recovery Image. Please try and report bugs.
Original Thread : http://forum.xda-developers.com/showthread.php?t=2201860
Download Links
Odin
>https://docs.google.com/file/d/0B_SFFvHY6sAFMVczNi1aTFAwb2M/edit?usp=sharing
Flashable Version Made by @balliboxer Thanks..
>http://d-h.st/joj
Click to expand...
Click to collapse
Many Many thanx @mohanbhshr .. u have made a magical work....no words to describe it..one more reqest sir..plz do something about USB OTG function...waiting from ages ....
Sent from my GT-I9082 using XDA Premium 4 mobile app
Omni M
Welcome to the Omnirom Marshmallow thread for vibrant. I would like to thank @sooti without him this wouldn't have been possible. He put a lot of work into bringing Marshmallow to the Galaxy S1.
What is omniRom?
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Warning!! make sure you have a good charge in your battery, also do not disconnect battery during boot, or you will be stuck in bootloop until you use odin to flash a new kernel
Steps to install:
format data partition to f2fs in TWRP the perform a Full wipe using TWRP (and I mean full wipe! system, data, cache etc)
Install ROM
Install attached gapps
reboot and wait, it takes a long time to boot and once it does its very slow the first time so be patient
recommended: set overclock to 1400 mhz and minimum to 200 to avoid some of the lag, also reboot after setup is complete to clear some memory that wizard uses and caches
Credits
All my credits goes to sooti who work hard to bring Android M for us.
and to falconscrest123 i edit his rom to make this
also to Thanhtho96 for testing the rom
Download
ROM
gapps 6.0
Original thread
Here
Note
After flashing rom first time usage seems to be slow so be patience. If some one got lots of force closing or process stops messages just do factory reset i solves the problem. Here there is no delay in call
Screenshots
Link Updated!!!!
Audiracecar90 said:
Link Updated!!!!
Click to expand...
Click to collapse
I waited more than an our but the phone not boot. Now back with odin...
Boot fine i here
---------- Post added at 10:41 PM ---------- Previous post was at 10:41 PM ----------
Do you change data to ?f2fs
Thanhtho96 said:
Boot fine i here
---------- Post added at 10:41 PM ---------- Previous post was at 10:41 PM ----------
Do you change data to ?f2fs
Click to expand...
Click to collapse
Yes I did.
selmandeli said:
Yes I did.
Click to expand...
Click to collapse
Ok should u remove SD card and try flashing because sd card not works in M it also causes issue
selmandeli said:
Yes I did.
Click to expand...
Click to collapse
As thantho told there is no issue with booting because we both test the rom and upload it. Ok no problem if same boot loop occurs means try to flash this kernel after install rom in TWRP. Here
finally mama super
Babloo1989 said:
finally mama super
Click to expand...
Click to collapse
Thanks bro
Mine vibrant boots rom and works quick, really no delay in caller,but there are some lags:
- volume buttons upside down
- in calls i hear only on speaker mode
- long press of home button does not opening recent apps (in galaxy s tread i found solution to enable software keys, works fine)
- make a try to return to epicboy's build 5.1.1 but twrp says mine vibrant is i9000, how can i fix it?
Big shoutouts for the rom, it's great, hope it get so stable in use than my previous
Marshmallow baby!
OggyRock said:
Mine vibrant boots rom and works quick, really no delay in caller,but there are some lags:
- volume buttons upside down
- in calls i hear only on speaker mode
- long press of home button does not opening recent apps (in galaxy s tread i found solution to enable software keys, works fine)
- make a try to return to epicboy's build 5.1.1 but twrp says mine vibrant is i9000, how can i fix it?
Big shoutouts for the rom, it's great, hope it get so stable in use than my previous
Marshmallow baby!
Click to expand...
Click to collapse
Try to flash Iyahman kernel via odin and try other roms. these all problem is due to kernel issue ok when we got clean kernel all problem solved
where can I find twrp for the vibrant I can't seem to find it and it shows as not supported.
djeddieone said:
where can I find twrp for the vibrant I can't seem to find it and it shows as not supported.
Click to expand...
Click to collapse
bro since there's a kernel issue vibrant's twrp doesn't works after flashing this ROM.. So you have to odin back to stock and again do flashing..
BTW i'm kinda surprised to see you bro.. I didn't knew this stuff.. 3 years ago i have seen one of your video on youtube channel.. This would've not happened without that video of yours.. Keep the good work up bro god bless you
thanks man I thought I had lost my old vibrant I found it today and brought it out to play. I had to watch some of my own videos just get back on track lol... I flashed cm 10.1 then resurrection rom 5.0 just to get twrp then flashed omni 5.1 and got it to boot up. I get some many request for more videos that decided to bring the phone back out to try and do some newer updated videos for people that need help.
BTW i'm kinda surprised to see you bro.. I didn't knew this stuff.. 3 years ago i have seen one of your video on youtube channel.. This would've not happened without that video of yours.. Keep the good work up bro god bless you [/QUOTE]
---------- Post added 02-01-2016 at 12:02 AM ---------- Previous post was 01-01-2016 at 11:28 PM ----------
Babloo1989 said:
bro since there's a kernel issue vibrant's twrp doesn't works after flashing this ROM.. So you have to odin back to stock and again do flashing..
BTW i'm kinda surprised to see you bro.. I didn't knew this stuff.. 3 years ago i have seen one of your video on youtube channel.. This would've not happened without that video of yours.. Keep the good work up bro god bless you
Click to expand...
Click to collapse
From your experience which is the most stable 5.1 Rom? I see there's problems with the 6.0.1 omni Rom
djeddieone said:
thanks man I thought I had lost my old vibrant I found it today and brought it out to play. I had to watch some of my own videos just get back on track lol... I flashed cm 10.1 then resurrection rom 5.0 just to get twrp then flashed omni 5.1 and got it to boot up. I get some many request for more videos that decided to bring the phone back out to try and do some newer updated videos for people that need help.
BTW i'm kinda surprised to see you bro.. I didn't knew this stuff.. 3 years ago i have seen one of your video on youtube channel.. This would've not happened without that video of yours.. Keep the good work up bro god bless you
Click to expand...
Click to collapse
---------- Post added 02-01-2016 at 12:02 AM ---------- Previous post was 01-01-2016 at 11:28 PM ----------
From your experience which is the most stable 5.1 Rom? I see there's problems with the 6.0.1 omni Rom[/QUOTE]
bro i suggest CodeROM 5.1.1 it is very stable..
It really whips the lama's ass!
I love this ROM so far.
Problems I've got:
- I'm receiving calls with no sound (fortunately it's a secondary/testing phone).
- The hardware buttons Home and Back are inverted.
- I cannot get the multitasking menu long-pressing any button.
Apart from that, everything look fine.
Congratulations, and thanks for this great port!
thanks I will give it a try can't wait for this 6.0.1 rom to be fully working.
SuperJMN said:
I love this ROM so far.
Problems I've got:
- I'm receiving calls with no sound (fortunately it's a secondary/testing phone).
- The hardware buttons Home and Back are inverted.
- I cannot get the multitasking menu long-pressing any button.
Apart from that, everything look fine.
Congratulations, and thanks for this great port!
Click to expand...
Click to collapse
Im really sorry this problem occurs due to kernel messed up im not able to make complete kernel because im not developer just i know some ways to port do only but ill find the solution quickly and update this rom as soon as possible
djeddieone said:
thanks I will give it a try can't wait for this 6.0.1 rom to be fully working.
Click to expand...
Click to collapse
Hi bro surprised to see you Im also the person who flash the roms by watching your videos link
https://www.youtube.com/watch?v=wMQQDpqVNBk
After that ill watch some information and try porting bro. Ya omni 6.0.1 have many issues due to kernel im not able to get pure kernel but ill try that thaks for your presence
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Warning
This recovery will TRIP your Knox Counter and your warranty will be void.
This recovery is only for Samsung Galaxy A8 (SM-A800F) Exynos Octa 5430 variant running 5.1.1 (Lollipop).
This project is discontinued move toward twrp thread http://forum.xda-developers.com/samsung-a-series/orig-development/recovery-twrp-2-7-1-0-a8-sm-a800f-t3283494/post64588475#post64588475
Tested Safely on following devices.
Samsung Galaxy A8 (SM-A800F)
Instructions
Follow the instructions carefully.
Step 1 :
Install Samsung Drivers and connect your device to PC. let it install drivers and if its updating let it update. your device drivers should be perfectly installed without a single failure.
Link to Samsung Drivers
Step 2 :
Download Odin 3 you can use 3.07 or 3.09
You can download Odin from here
Download the CWM Recovery
Step 3:
Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy A8 Logo
Press vol up to confirm
Step 4:
Now that you are in Odin Mode connect your device via USB cable.
Now open Odin3 3.09 or 3.07 that you have downloaded.
If there is a pop-up like Installing ADB drivers let it get finished it usually updates.
Make sure the COM : xx (xx is usb port number it can be any number so don’t worry about it, just verify COM is lit up)
Now select AP and browse to where you have .tar file and select it
Make Sure only Default Auto Reboot and F. Reset Time is ticked and nothing. verify twice only these 2 are ticked.
Untick Auto Reboot if you are installing recovery for first time!
Click Start and wait for the process to end. DO NOT Interrupt during this time.
Once it says PASS. BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON.
Done.
Credits:
@Koush i.e. Koushik Dutta for his recovery.
@paveenash for testing recovery!
@DigiGoon for his compressed sources
Contributors
androidlover5842, shubham540
Source Code: https://github.com/Grace5921/device_samsung_a8elte
Kernel Source Code: https://github.com/Grace5921/Kernel_samsung_a8elte
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: Cyanogenmod
Version Information
Status: Stable
Created 2015-12-30
Last Updated 2016-01-03
Not Working SM-A800S, Please Build TWRP. THKS
tunglethanh90 said:
Not Working SM-A800S, Please Build TWRP. THKS
Click to expand...
Click to collapse
what did you see blank screen? And i am compiling twrp right now i am not sure it will work because i have stcok kernel and wrong fstab files
for a800f working
---------- Post added at 01:38 PM ---------- Previous post was at 01:37 PM ----------
thanks a lot
paveenash said:
for a800f working
---------- Post added at 01:38 PM ---------- Previous post was at 01:37 PM ----------
thanks a lot
Click to expand...
Click to collapse
really working ?? can you send me screen shots because i have to attach in thread and tell me bugs also please
Storage not mounted
---------- Post added at 05:00 PM ---------- Previous post was at 04:59 PM ----------
Fix that one
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
Not showing storage in recovery and unable to mount
paveenash said:
Storage not mounted
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
Not showing storage in recovery and unable to mount
Click to expand...
Click to collapse
internal or external or both ?? and please quote me
paveenash said:
Storage not mounted
Click to expand...
Click to collapse
try this and tell me
androidlover5842 said:
try this and tell me
Click to expand...
Click to collapse
that problem resolved
backup not working(error while making image of data)
but internal mounted successfully
thanks for thread
if possible give custom rom for a8
i hate this samsung ui
paveenash said:
that problem resolved
backup not working(error while making image of data)
but internal mounted successfully
thanks for thread
if possible give custom rom for a8
i hate this samsung ui
Click to expand...
Click to collapse
ok i will port cm13 to this device
androidlover5842 said:
try this and tell me
Click to expand...
Click to collapse
The download links are down?I recieved error on the links u gave.
I did not use the google drive link because the mediafire link is the updated ones right?
In any case you need any files let me know(SM-A800F).
AMDFusion said:
The download links are down?I recieved error on the links u gave.
I did not use the google drive link because the mediafire link is the updated ones right?
In any case you need any files let me know(SM-A800F).
Click to expand...
Click to collapse
you mean you can't download from drive you need mediafire link
androidlover5842 said:
you mean you can't download from drive you need mediafire link
Click to expand...
Click to collapse
No what I mean is, is the Google drive link is the recovery with the updated version? Or mediafire is the latest? Because I can't download the links at mediafire but on Google drive it's fine.
So which link is the latest updated recovery?
AMDFusion said:
No what I mean is, is the Google drive link is the recovery with the updated version? Or mediafire is the latest? Because I can't download the links at mediafire but on Google drive it's fine.
So which link is the latest updated recovery?
Click to expand...
Click to collapse
Google drive link is up to date link can you tell me result after trying !
androidlover5842 said:
Google drive link is up to date link can you tell me result after trying !
Click to expand...
Click to collapse
Sure!
I will keep you updated with how it goes.
AMDFusion said:
Sure!
I will keep you updated with how it goes.
Click to expand...
Click to collapse
thanks
tunglethanh90 said:
Not Working SM-A800S, Please Build TWRP. THKS
Click to expand...
Click to collapse
http://forum.xda-developers.com/sam...nt/recovery-twrp-2-7-1-0-a8-sm-a800f-t3283494
androidlover5842 said:
thanks
Click to expand...
Click to collapse
can you test this one http://forum.xda-developers.com/sam...nt/recovery-twrp-2-7-1-0-a8-sm-a800f-t3283494
paveenash said:
that problem resolved
backup not working(error while making image of data)
but internal mounted successfully
thanks for thread
if possible give custom rom for a8
i hate this samsung ui
Click to expand...
Click to collapse
How come yours worked?mine not?
androidlover5842 said:
http://forum.xda-developers.com/sam...nt/recovery-twrp-2-7-1-0-a8-sm-a800f-t3283494
Click to expand...
Click to collapse
TS,it doesnt work on mine.Stuck at Samsung Logo showing RECOVERY IS NOT SEANDROID ENFORCING.
Tried both TWRP and CWM.What could possibly wrong?
AMDFusion said:
How come yours worked?mine not?
TS,it doesnt work on mine.Stuck at Samsung Logo showing RECOVERY IS NOT SEANDROID ENFORCING.
Tried both TWRP and CWM.What could possibly wrong?
Click to expand...
Click to collapse
your android is booting wait i am attaching stock recovery also
Samsung Galaxy J7 (SM-J700T/T1) Variants
(MM 6.0 KERNEL)This Kernel is based on samsung official kernel source J700TUVU1APD2
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Features :
-selinux is set to permissive
-samsung root restrictions removed
How to flash [no need to have root] :
Code:
* You should turn on oem unlock in developer settings before flashing *
* Download the odin format kernel zip *
* Extract it *
* Enable oem unlock in the developer options *
* Enter download mode *
* Flash the extracted [boot.tar.md5] file using odin *
* Enjoy *
Downloads :
v1 [image format]
HTML:
http://www.mediafire.com/download/j2a3m54txr3aedd/permissive+selinux+and+root+restrictions+removed+kernel+for+j700t.zip
v1 [odin format]
HTML:
http://www.mediafire.com/download/f6epn6k8951j6x4/odin-permissive-kernel-j700t-t1.zip
Please Conider donating if you appreciate my work, Ty :highfive:
reserved
I love it!!! Thanks so much for the work and I can't to see what's to come!!!!
Thank you for your work and your help. Trying it shortly.
-sent from this device using this app.
!Led*Eyes! said:
I love it!!! Thanks so much for the work and I can't to see what's to come!!!!
Click to expand...
Click to collapse
OriginalShinken1 said:
Thank you for your work and your help. Trying it shortly.
-sent from this device using this app.
Click to expand...
Click to collapse
thanks alot for you guys , it wouldn't be possible without u
This also works for J700T (T-MOBILE)
-sent from this device using this app.
Since my J700T needs to be rooted to be able to flash this kernel, is there a solid way to root the j700t yet?
caasanova said:
Since my J700T needs to be rooted to be able to flash this kernel, is there a solid way to root the j700t yet?
Click to expand...
Click to collapse
Oh my god all you need is to flash my kernel then twrp and after that the supersu zip it's very simple it's not my problem that you don't read the topic carefully
messi2050 said:
Oh my god all you need is to flash my kernel then twrp and after that the supersu zip it's very simple it's not my problem that you don't read the topic carefully
Click to expand...
Click to collapse
Flashify requires root
caasanova said:
Flashify requires root
Click to expand...
Click to collapse
odin flashable file added
how to flash instructions updated no need for preroot now enjoy
Quick question. Do I flash the kernel through Odin first or trwp?
mario1634 said:
Quick question. Do I flash the kernel through Odin first or trwp?
Click to expand...
Click to collapse
The kernel
Thanks @messi2050, but i have a question.. how to get rid of VoLTE in the status bar, next to my 4glte icon?
305county said:
Thanks @messi2050, but i have a question.. how to get rid of VoLTE in the status bar, next to my 4glte icon?
Click to expand...
Click to collapse
Go to the phone app and go to settings and click it off
mario1634 said:
Go to the phone app and go to settings and click it off
Click to expand...
Click to collapse
Thank you for your input, but i only want to stop the icon from appearing, i dont want to turn it off completely... It wasnt there before i flashed the kernel..
Flashing Kernel
messi2050 said:
odin flashable file added
Click to expand...
Click to collapse
So am i to understand that i should be able to flash the Kernel with Flashify and then i can flash in TWRP? Am currently having an issue getting TWRP on my J700T and im hoping with this Kernel and using Flashify that this will solve all.
Will this kernel give the j7ooT SUB host capabilities?
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
amt325 said:
Will this kernel give the j7ooT SUB host capabilities?
Click to expand...
Click to collapse
USB capabilities?
I want to install LUKs Manager app on my J7. Stock roms of course will not work. Will this ROM do the trick? Also, I have rooted and installed TWRP. Will I still be able to flash this ROM? If so, what will I need to do again, if anything, after flashing said ROM?
amt325 said:
Will this kernel give the j7ooT SUB host capabilities?
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
USB capabilities?
Click to expand...
Click to collapse
Good question. Haven't tried but I might just do that right now...
I've tried a flash drive and a keyboard. Works. I assume a mouse too.
Also tried a external DVD drive and a vcr......both didn't work.
(Kidding on vcr.)
sent from the interwebs on dis here device using m'fanger....
---------- Post added at 09:57 PM ---------- Previous post was at 09:51 PM ----------
TributeUser said:
I want to install LUKs Manager app on my J7. Stock roms of course will not work. Will this ROM do the trick? Also, I have rooted and installed TWRP. Will I still be able to flash this ROM? If so, what will I need to do again, if anything, after flashing said ROM?
Click to expand...
Click to collapse
Just to be clear, this is a kernel that this thread is about. If your device is not a j700t (T-Mobile) or j700t1 (metro pcs) then no. It should not work for you.
And not trying to sound condescending at all here, but a kernel is the software that your Rom interacts with the hardware. Kernels are very device specific and flashing the wrong one can leave you with a paperweight.
So my question to you is what device do you have?
sent from the interwebs on dis here device using m'fanger....