Database Develop

[Q] Having trouble connecting LGOB to the PC Suite [Q]

Whenever I try to connect my Lg Optimus Black to the PC Suite it isn't recognised...
Any ideas?
TomByrne94

What operating system are you using on your PC? I wasn't able to correctly install the drivers under Vista, I've only managed to get the thing running on an XP system.

Windows 7, i've installed the drivers a few different times now and they seemed to work each time...

Problem resolved.

TomByrne94 said:
Problem resolved.
Click to expand...
Click to collapse
Any chance of sharing the solution, in case any other person is having the same issue and lands on this page after a search? Thanks!

I just reinstalled the drivers a load of times and made sure that mass storage mode wasn't enabled...

Bluetooth drivers for windows 7

Hi All,
I am not able to connect my Optimus black via blutooth to my Windows 7 laptop. I get some driver error. Can anyone please guide me to the place where I can get the bluetooth drivers for OB with Windows 7.
Thanks in advance.

raj_malhotra said:
Hi All,
I am not able to connect my Optimus black via blutooth to my Windows 7 laptop. I get some driver error. Can anyone please guide me to the place where I can get the bluetooth drivers for OB with Windows 7.
Thanks in advance.
Click to expand...
Click to collapse
Are other device with bluetooth can connect with your laptop?

Yes, perfectly

Driver setup attached
I have attached a bluetooth driver installer zip file with this post.
Download it and install it. It should work fine.

Did not work :-(. I am using Windows 7 enterprise. It find the phone and try to pair it also, but fails to find the drivers. I have even tried to reboot after instaling the drivers you have sent but did not work.
Any other suggestion? or link to the drivers?

I use Windows 7 Enterprise, and doesn't have problem with bluetooth, send/recieve to/from Phone/Laptop.
Perhaps your problems come from your laptop.

Strange, I follow the normal steps to install / pair the device but when it looks for the driver it gives the error for the driver :-(.
Any other suggestion to make this wor?
thanks

If your laptop can connect/pair with other Bluetooth device, then it should fine i presume..
How about connect OB with your USB cable, is it work?

[Q] missing drivers Qualcomm msm device nokia 820

I tried to make a recovery as I have a problem with my phone Nokia 820 Lumia
I fault for everything reinstalled but I'm missing a file called
qualcomm msm device without it I can do anything
drivers for windows 7 32bits
Please help me

mysterious lambada said:
I tried to make a recovery as I have a problem with my phone Nokia 820 Lumia
I fault for everything reinstalled but I'm missing a file called
qualcomm msm device without it I can do anything
drivers for windows 7 32bits
Please help me
Click to expand...
Click to collapse
If you are looking for the drivers this might be the right one: http://forum.xda-developers.com/showthread.php?t=1669498
There is a full instruction about how installing it. I hope this is the answer you searched for.

[Q] my nokia x2 has a boot loop.. it always keep restarting!

Please help my nokia x2 software 2.1.0.13 ..I installed Google services and root...after I turned it off it just keep restarting..I flash it with Nokia care suite with V( 2.1.0.11 and 2.1.0.12 and 2.1.0.13 ) but all these versions have the same issue and no use just keep restaring.. I tried to wipecash and reset factory.. I also used nokia software updater.. thanks in advance

omerx2 said:
Please help my nokia x2 software 2.1.0.13 ..I installed Google services and root...after I turned it off it just keep restarting..I flash it with Nokia care suite with V( 2.1.0.11 and 2.1.0.12 and 2.1.0.13 ) but all these versions have the same issue and no use just keep restaring.. I tried to wipecash and reset factory.. I also used nokia software updater.. thanks in advance
Click to expand...
Click to collapse
I think you should take one more try on 2.1.0.13.. and confirm it thAT this is 2.1.0.13....

omerx2 said:
Please help my nokia x2 software 2.1.0.13 ..I installed Google services and root...after I turned it off it just keep restarting..I flash it with Nokia care suite with V( 2.1.0.11 and 2.1.0.12 and 2.1.0.13 ) but all these versions have the same issue and no use just keep restaring.. I tried to wipecash and reset factory.. I also used nokia software updater.. thanks in advance
Click to expand...
Click to collapse
I have had similar issue, my phone sometimes started after leaving my phone for several minites. But there was no network. I googled and found that this happens because of corrupted imei partition. Gave it to nokia care they fixed it free under warrenty.

I downgraded it with V 2.0.0.11 but after selecting language it hangs on (please wait) then restart again..I downloaded Rm-1013 2.1.0.13 059V782 via (nokia software updater for retail) and just has boot loop...do you suggest me a soultion please? thanks

Oh, maybe cuz with( V 2.0.0.11 ) it starts normaly but when after selecting language it hangs on (please wait)for a long time then reboot but when I flashed it with (2.1.0.12 and 2.1.0.13) it complete sucessfully ...but loop boot again....please tell me how to fix it. If you already know .Cuz I have no Nokia Care
in here......thanks in advance

Mine's not starting.
My phone was stuck on bootloop so I tried to flash it, nut in during the process, the phone just went off. Now it's not even booting into recovery. Help please! All it shows is QHSUSB_BULK in my devices and printers. Anything useful would be really appreciated.

install Nokia Care Suite Select (NO CONNECTION) and uncheck Automatic product selecting plug in your phone then flash it..

Doesn't work
omerx2 said:
install Nokia Care Suite Select (NO CONNECTION) and uncheck Automatic product selecting plug in your phone then flash it..
Click to expand...
Click to collapse
I tried already. I didn't work. My phone isn't even responding to any thing I do again. Doesn't come on. All it shows is QHSUSB_BULK in devices and printers. I also can't flash because my phone doesn't show the Nokia logo that allows me start the flashing process.

so.your phone is bricked ! take it to nokia care or a technician who has tools box or dongle ..it cannot be fixed with at home.. or check this http://forum.xda-developers.com/nokia-x2/general/tutorial-unbrick-nokia-x2-t2905280

in my case, the problem started after trying to update super su..
omerx2 said:
Please help my nokia x2 software 2.1.0.13 ..I installed Google services and root...after I turned it off it just keep restarting..I flash it with Nokia care suite with V( 2.1.0.11 and 2.1.0.12 and 2.1.0.13 ) but all these versions have the same issue and no use just keep restaring.. I tried to wipecash and reset factory.. I also used nokia software updater.. thanks in advance
Click to expand...
Click to collapse
I have had the same problem with my nokia x2 About 2 months ago.I had tried everything you mentioned above but nothing worked.The handset kept restarting and there were no signal on both of my sim cards.So, i unrooted my device using nokia xtools and gave it to nokia care.I told them that the problem started after trying to update it
Then they replaced my x2's whole motherboard under warrenty.It took almost 2 month to get my x2 Back and now it's working fine.
Best of luck bro...trust me there's no other way to fix this without nokia care.

your phone may work like in the following screenshot.. you need nokia bb5 Best tool box

USB connection on windows 10 phone not recognised

Hi,
I recently updated to windows 10 and when I connect my Z1 (5.0.2) windows doesn't recognise it...
I installed Sony PC companion but still nothing.
When I plug it in windows does detect that there's someting connected and when I check in devices and printers
it shows the model number C6903 under unspecified devices. I tried installing drivers in device manager but can't find any that works...
Has anyone else encountered this problem and was able to fix this?
Thanks!!

anyone know how to fix this?

Install flashtool drivers and don't forget to see "Windows 8 fix"
(I know you are using windows 10 but windows 8 fix is working as well for windows 10)

UltraWelfare said:
Install flashtool drivers and don't forget to see "Windows 8 fix"
(I know you are using windows 10 but windows 8 fix is working as well for windows 10)
Click to expand...
Click to collapse
Got the same problem on Windows 10 since yesterday..
MTP mode works
MSC not, Internal storage is not recognised?
What to do?