Database Develop

[Q] Dynamic Kat 1.4 Lost root

Since I'm mostly a lurker and I rarely run into issues that someone hasn't already run into, I don't have the post count to post on the actual Dynamic 1.4 thread. But I'm a little stumped. I seem to have lost root, and when I run anything in SS I get multiple I/O errors referencing data/data/chainfire su files.
I came from knoxraid. Installed new safestrap. wiped. Installed 1.0 from SS then 1.4 from SS. Set up the phone. Restored apps. Set up my favorite xposed modules. All was good for a few hours then I noticed I didn't get a full screen call ID on a call. I went in to check xposed and all the modules were unchecked. I tried to install/update but it said xposed wasn't compatible with my version. So I uninstalled xposed and tried reinstalling. Now it errors on install with "Can't install, free up space and try again" I have plenty of space, but I noticed the last I/O error I get in SS refers to data/data/xposed something or other. So I did the whole wipe and start with 1.0 process over, but nothing changed. No root. And I don't know if the I/O errors are keeping SS from wiping system when it installs, so I'm wary about installing another rom just to see if it works. But I can still boot into SS.
So I'm not sure which direction to go from here.
The errors are:
E:error: I/O error
E:error opening '/data/data/eu.chainfire.supersu/logs'
E:error opening '/data/data/de.robv.android.xposed.installer'
" " " /data/data/eu.chainfire.supersu/requests
fix permissions didn't work. An extra error was "unable to chmod data/data/eu.chainfire.supersu/requests"
I can't access those files using file explorer in SS.

Well if anyone runs into a similar issue- I wasn't able to install any applications after that as well.
A wipe from stock recovery fixed it. Although it wiped a lot more than I had anticipated

Was the installation on the stock slot? That is where it needs to be. Get your post count up so you can join us!

bri315317 said:
Was the installation on the stock slot? That is where it needs to be. Get your post count up so you can join us!
Click to expand...
Click to collapse
Yeah I made sure to use stock slot. And everything was fine for a few hours. I really don't think it had anything to do with the rom. I'm leaning towards and install/enable/unistall/disable process that I was burning through on xposed, since the locked up files were su and xposed. And I had other apps downloading and installing in the background. I just gotta learn to slow down. Got everything set up today and it's running beautifully. I was on your Dynamic GPE for JB and it was my favorite. I gave the KK version of knoxraid a shot but got super excited when I saw SS had updated and I could go back to dynamic without odin.
It was fun now that it's fixed. I hadn't been into stock recovery since the old DX days. I didn't realize a data wipe from there took out just about everything on internal storage. Good thing I had the important stuff backed up.
I've been following your work for a while. And you sir, are fantastic. :good:

Cyanogenmod 13??????

Will cyanogenmod 13 come to the kindle fire hd 7 (Tate)?

Yep, @BuQQzz and I (mostly him, haha) are working on porting CM13 to this device, as well as the 8.9" (jem). I'm not exactly sure when a usable build will be uploaded, but it should be in the not-so-distant future.

I'm running 12.1 on mine and even though the rom is very lean the Kindle is always running slow. I have 2 questions concerning this. One, based on what you're seeing so far during development, is the rom running at a better speed?
Two, what steps can I take to make sure I am running the best I can for the best results?
The system was wiped completely. I did a super clean install, I've made a backup and moved it to my desktop (in case I need to push it), and I usually only do an update about once every two weeks. Mainly due to the fact that I have to jump through all the hoops of reinstalling Google Play Services, Google games, and the SuperSU beta.
If there are other things you think may help please give suggestions and advice. I can add external storage, however at the moment I do not have an SD card in the slot. To me since storage and RAM are two different things I am thinking it would make little difference to add external storage since I have very few apps downloaded on it.

Jaybone073 said:
I'm running 12.1 on mine and even though the rom is very lean the Kindle is always running slow. I have 2 questions concerning this. One, based on what you're seeing so far during development, is the rom running at a better speed?
Two, what steps can I take to make sure I am running the best I can for the best results?
The system was wiped completely. I did a super clean install, I've made a backup and moved it to my desktop (in case I need to push it), and I usually only do an update about once every two weeks. Mainly due to the fact that I have to jump through all the hoops of reinstalling Google Play Services, Google games, and the SuperSU beta.
If there are other things you think may help please give suggestions and advice. I can add external storage, however at the moment I do not have an SD card in the slot. To me since storage and RAM are two different things I am thinking it would make little difference to add external storage since I have very few apps downloaded on it.
Click to expand...
Click to collapse
1) The ROM currently doesn't even boot up at this point. It's an issue with SELinux that we're working to resolve.
2) I would suggest that you avoid having too many apps on the device - doing so tends to make app optimization take longer (which usually occurs after an OTA or a manual cache wipe). Also, try not to have too many xposed modules or other android mods on your device - if modules or frameworks conflict with each other or the base system, system stability and speed can be negatively impacted. As for the issues with having to reflash gapps, xposed, etc. after an OTA, I use CM Downloader (which is available on the Play Store) to automatically handle flashing other zips after the CM base ROM.
You're right - storage and RAM are two different things. Unless you're low on storage and/or need to share files between multiple devices, I wouldn't see a need for an SD card. Also, I'm fairly certain that the 2012 HD 7" (tate) doesn't have an SD card slot (are you using a 5th generation device?). This discussion is for the 2012 HD 7" models, not for other (or later) models; flashing a ROM meant for another device can and most likely will brick your kindle.

monster1612 said:
1) The ROM currently doesn't even boot up at this point. It's an issue with SELinux that we're working to resolve.
2) I would suggest that you avoid having too many apps on the device - doing so tends to make app optimization take longer (which usually occurs after an OTA or a manual cache wipe). Also, try not to have too many xposed modules or other android mods on your device - if modules or frameworks conflict with each other or the base system, system stability and speed can be negatively impacted. As for the issues with having to reflash gapps, xposed, etc. after an OTA, I use CM Downloader (which is available on the Play Store) to automatically handle flashing other zips after the CM base ROM.
You're right - storage and RAM are two different things. Unless you're low on storage and/or need to share files between multiple devices, I wouldn't see a need for an SD card. Also, I'm fairly certain that the 2012 HD 7" (tate) doesn't have an SD card slot (are you using a 5th generation device?). This discussion is for the 2012 HD 7" models, not for other (or later) models; flashing a ROM meant for another device can and most likely will brick your kindle.
Click to expand...
Click to collapse
I stand corrected. There is no external slot. I was mistaking the back logo panel as a possible external storage cover. My son has had the device for quite some time and he asked dad (me) to give it the "works". The device was running atrocious and much slower than it does now. I've had it for about 2 months and after installing the 2nd bootloader, rooting, twrp recovery..... You get the idea, I had it very stable and clean. It's been running quite well on 12.1 and I am pleased to see development still happening for such an older device.
As far as apps go, I have only installed what he likes. A few games (about 4) and a couple of social ones like Instagram and facebook for him. The real slowdown was actually with Facebook continually not updating and having errors. A recent reboot has fixed that. It also appears that the occasional reboot is actually helping the rom settle in.
I had previously tried the CyanDelta Updater on the play store and it didn't work well. I will now give CM Downloader a try to see of that keeps me from having to reflash the GApps and other apk that seem to force close that I had previously mentioned.
Thanks for the quick response and advice.

Jaybone073 said:
I stand corrected. There is no external slot. I was mistaking the back logo panel as a possible external storage cover. My son has had the device for quite some time and he asked dad (me) to give it the "works". The device was running atrocious and much slower than it does now. I've had it for about 2 months and after installing the 2nd bootloader, rooting, twrp recovery..... You get the idea, I had it very stable and clean. It's been running quite well on 12.1 and I am pleased to see development still happening for such an older device.
As far as apps go, I have only installed what he likes. A few games (about 4) and a couple of social ones like Instagram and facebook for him. The real slowdown was actually with Facebook continually not updating and having errors. A recent reboot has fixed that. It also appears that the occasional reboot is actually helping the rom settle in.
I had previously tried the CyanDelta Updater on the play store and it didn't work well. I will now give CM Downloader a try to see of that keeps me from having to reflash the GApps and other apk that seem to force close that I had previously mentioned.
Thanks for the quick response and advice.
Click to expand...
Click to collapse
If you go into the CM Downloader app settings, you should be able to add in the zips (maximum of 6) you want flashed after a ROM update. Once that's complete, all you need to do is download an update and initialize the install process from within the app, and it'll handle flashing the zips. From personal experience on CM nightlies for jem (the 8.9" version), I tend to see stability break down after about 24 hours of device uptime without a reboot, so reboots do help significantly.

Any progress so far?

Pix12 said:
Any progress so far?
Click to expand...
Click to collapse
Currently, the generated zips take longer than cm12.1 to flash (but they still flash successfully). As for a functional ROM, that hasn't happened yet - it refuses to boot after about 5 seconds. last_kmsg says it's an SELinux issue.

How to have a clean Android without any Google app? Install AOSP?

Hi everyone,
I have a Sony Z3 compact I just received, model D5803 running Android 6.0.1 with Firmware 23.5.A.0.575.
I really dislike Google and want to run a phone with the minimum of proprietary software (I guess blobs to communicate with the hardware are mandatory). I guess AOSP (any version, but a recent one would be better ) with F-Droid is a good solution.
Unfortunately when checking the sony website but it tells my the bootloader is not unlockable. What should I do? I'm running Ubuntu and have adb and fastboot installed.

I found [this topic](https://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714) which tells it roots the phone (and has a GNU/Linux script) but how does that help me to install a Rom, for example the AOSP provided by Sony at /open-devices/list-of-devices-and-resources/ if the bootloader is still locked? What are TWRP and busybox, is that supposed to help?

Flaburgan said:
I found [this topic](https://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714) which tells it roots the phone (and has a GNU/Linux script) but how does that help me to install a Rom, for example the AOSP provided by Sony at /open-devices/list-of-devices-and-resources/ if the bootloader is still locked? What are TWRP and busybox, is that supposed to help?
Click to expand...
Click to collapse
TWRP is a custom recovery that allows you to flash a ROM and other files, that are stored on the normal internal or external storage.
Busybox is a binary that gives you command line tools that are often included in a Linux install and some of which aren't included on normal Android. These are commands that other things may make use of, or that you can make use of at a terminal app or run from Tasker or similar app.
You want to look at backing up your TA partition, which stores your DRM keys, before unlocking the bootloader to install a custom ROM because some functionality, camera quality and anti-distortion, sound quality, and some other stuff which I don't remember, won't work if you go back to the stock ROM unless you have these keys backed up and then restored later. You need to unlock the bootloader in order to flash a custom ROM and doing this erases, permanently, these DRM keys, so they need to be backed up and then put back later if you relock the bootloader and flash a stock ROM.
If you look in the Original Development section, Jaguar Aries ROM has no Google Apps, had the latest patches up to Febuary, and had the best battery life of any custom ROM I've seen for this phone, right on par with stock. There are some builds of Lineage OS that are probably closer to being up to date as well and may have a better camera than Jaguar. The developer of Jaguar has moved on to another phone. That said, if you aren't experienced and don't know what TWRP is, then installing it is an extra step from other ROMs as well since it requires you to setup a firewall app to permit connections on data or wifi before you can use the wifi or data at all. I doubt Lineage OS has this, but presume that battery life would not be good.
Also, if you install microg apps, you can still use things such as cell and wifi based location, google push services, and ... I don't remember what else, however it hasn't been updated recently and many apps will complain and refuse to run saying that you need to update google play services, especially annoying for anything that uses push especially. Microg essentially sits in the place of where some functionality of Google Apps would and fills in some blanks.
When you don't have Google Apps installed, many paid apps will refuse to run as well, specifically the ones you paid for, because they can't verify the purchase with Google servers. There should be a **** list for any developers that don't cooperate when this is a problem for a user. I've only had one app developer help me on this, ever.

Thanks for your detailed answer!
You need to unlock the bootloader in order to flash a custom ROM and doing this erases, permanently, these DRM keys, so they need to be backed up and then put back later if you relock the bootloader and flash a stock ROM.
Click to expand...
Click to collapse
Does that mean that I can't use the DRM keys with another ROM? So I will never have the full quality of my hardware? Would using the AOSP rom provided by Sony solve that problem?
On which version of Android Jaguar Aries ROM is based? I searched for a lineageOS image but didn't find any for the Z3 Compact.
I had another z3c which died and was running Firefox OS, I'm fine with not having access to the Google Play store, I plan to install F-Droid and use only FOSS apps. In fact I would even prefer to go back to Firefox OS even if it is not maintained anymore, its UX is so much better than Android... That said, thanks for telling me about Microg, I didn't know it and that's true that many apps use Play services especially for push. Even Signal had that as a dependency (fortunately not anymore). Still, I would avoid any data coming out from my phone to by sent to Google servers, so I will probably avoid it.

Flaburgan said:
Thanks for your detailed answer!
Does that mean that I can't use the DRM keys with another ROM? So I will never have the full quality of my hardware? Would using the AOSP rom provided by Sony solve that problem?
On which version of Android Jaguar Aries ROM is based? I searched for a lineageOS image but didn't find any for the Z3 Compact.
I had another z3c which died and was running Firefox OS, I'm fine with not having access to the Google Play store, I plan to install F-Droid and use only FOSS apps. In fact I would even prefer to go back to Firefox OS even if it is not maintained anymore, its UX is so much better than Android... That said, thanks for telling me about Microg, I didn't know it and that's true that many apps use Play services especially for push. Even Signal had that as a dependency (fortunately not anymore). Still, I would avoid any data coming out from my phone to by sent to Google servers, so I will probably avoid it.
Click to expand...
Click to collapse
When you unlock the bootloader the DRM keys get erased permanently, so you'd need to root the phone and back up the partition where they are held before unlocking it. As far as I know, every custom ROM needs to have the bootloader unlocked. If there is an alternative way to install a ROM on a locked bootloader then it would be one of those scenarios where its installed while keeping the stock one, and I don't know if this has been done on the Z3c or not.
I also don't know if Sony's AOSP requires unlocking the bootloader or not.
Jaguar is based on 5.1.1
Its a mix of AOSP, Lineage, and was getting monthly backports of the latest security patches until Febuary when the developer no longer had a Z series phone for his own use. The only criticism it met was that the developer never released the source code for the entire ROM, just the kernel. He never replied to why that was. A lot of the custom ROMs out there are like this, so its still a case of who you choose to trust when it comes to this a lot of times. I liked it because the battery life was really good and assuming the security was what was advertised then that was also a real plus.
Many apps, by the way, were working fine with microg push but then with updates to apps, they complained about needing to update google services framework, which obviously was spoofed and microg hasn't been updated, and it happened to a lot of apps in a short period of time, so I assume there was a change enforced by Google for their requirements in the Play Store. If you just want it for location, for example if you use Osmand maps, then you don't have to enable the feature for push notifications nor have a google account associated with the phone, and it all works as user installed apps, so it can be undone without any real fear of the system getting modified after you try it out. There's a microg repo that can be added to fdroid. The location is based on either databases you download to the phone, which aren't very good, or also you can opt for cell location from Mozilla servers, and if you have to have wifi based location as well then you can hook into the Apple servers but the latter doesn't sound like something you want, if you want to do any of it at all that is.
I think most likely that GPS location would work without any need for microg.
The post you linked to with the Linux script installs TWRP to the /data partition, then you root it, then you back up the DRM keys after its rooted, then unlock the bootloader, install normal TWRP, and go from there. In Linux you'lle want to use the dd command to back up the DRM keys as all that's available on the forum is a Windows script (I think). There is info on it somewhere but it would be hard to find it. If you search my posts the thread will come up somewhere in the history. Anyway, the reason I broght this up is because the script in the thread for installing TWRP and rooting didn't work properly. I don't remember why, but I had to go through it line by line and enter the commands in from a termnial to get it right, I think there was some bad syntax. If you can't figure it out, quote one of my posts and ask, that way I get a notification that I was replied to, I think I have a fixed version of it on my drive somewhere if it causes a problem.
For the DRM keys you want to backup the TA partition bit for bit to a file. I backed up my Fota partition as well as I was unclear what role it plays. You also want to keep a copy of that particular Sony ROM file, and the two kernels involved, to flash with Flashtool in case you relock and restore so you can get root access to restore the partition while the bootloader is locked again.

May I ask why are you going FOSS only? if that's because privacy concerns, then FF OS is not the best solution... Because any Cloud-based OS is a little bit creepy, doesn't matter if it's ChromeOS from Google, or FirefoxOS from Mozilla.
There are plenty of Linux distros dedicated to run on Android phones, but it's not the best UX.
And yes, you can enjoy clean AOSP install (LOS is fine) without flashing G-Apps. But you won't have Google play at all! F-Droid is fine but you won't find there Gmail alternatives, you can't find Gmail even on Amazon AppStore... Sadly if you install Gmail then you'll find out that it installed bunch of google apps and hidden services behind the scenes... So only option is to use Gmail web app.
But then again, F-Droid is fine, there are many FOSS alternatives to youtube and other apps.
And if privacy (and security) is your concern, use LOS privacy guard / Android's builtin Permission Manager, and on Rooted ROMs you can use AFwall firewall which is the best.
Good luck

GadgetAvi said:
Because any Cloud-based OS is a little bit creepy, doesn't matter if it's ChromeOS from Google, or FirefoxOS from Mozilla.
Click to expand...
Click to collapse
Firefox OS is not a Cloud-based OS at all. It runs perfectly without internet connection.
GadgetAvi said:
F-Droid is fine but you won't find there Gmail alternatives, you can't find Gmail even on Amazon AppStore...
Click to expand...
Click to collapse
Be sure that if I don't want Google on my phone, my e-mails are already **not** on GMail...

Ok, if so, then you'll be fine with any AOSP clean rom. LOS is great, and F-Droid as well. Cheers!

PantsDownJedi said:
The post you linked to with the Linux script installs TWRP to the /data partition, then you root it, then you back up the DRM keys after its rooted, then unlock the bootloader, install normal TWRP, and go from there. In Linux you'lle want to use the dd command to back up the DRM keys as all that's available on the forum is a Windows script (I think).
Click to expand...
Click to collapse
I ran the commands and the phone is now booted on TWRP from the /data partition. I did a backup with TWRP of all proposed options (Boot, TrimArea, Recovery, System, Cache and Data). Is that "TrimArea" enough to have a backup of the DRM keys? The other topic talks about Backup-TA but looking at their github https://github.com/DevShaft/Backup-TA/releases it looks very old and unmaintained.
The current TWRP I'm running is 3.1.0-0.

Also, it looks like I'm not root (at least, su is not available). Do I have to install SuperSu by giving this zip https://download.chainfire.eu/696/supersu/ to TWRP?

Flaburgan said:
I ran the commands and the phone is now booted on TWRP from the /data partition. I did a backup with TWRP of all proposed options (Boot, TrimArea, Recovery, System, Cache and Data). Is that "TrimArea" enough to have a backup of the DRM keys? The other topic talks about Backup-TA but looking at their github https://github.com/DevShaft/Backup-TA/releases it looks very old and unmaintained.
The current TWRP I'm running is 3.1.0-0.
Click to expand...
Click to collapse
I don't know. I haven't looked at a TWRP backup to see what format it is. Back when Clockwork Mod was all that was available, it merely made a tar.gz of partitions. Ideally you want a bit for bit image of the TA partitions to make sure it was exactly what it was when you restore it. I don't know if that's necisarry, or if TWRP does this anyway, but using the dd command is still prudent.
You want to either use a terminal emulator app or run 'adb shell' at a linux terminal (much easier), run 'su' once in the phone environment, allow it at the phone supersu app popup, and then do it like this.
https://forum.xda-developers.com/showpost.php?p=61307511&postcount=6
And store a copy of the image file where it won't get lost.
Edit: Sorry, I didn't see the other post. Yes, you need to flash that supersu zip file. When you try to access root from an app or the command line, it will have a popup on the phone screen asking you if you want to allow access or not, so when you run it from a terminal, 'adb shell' to get into the phone OS, there will be a popup for allowing that often times. Then 'su' there's a popup from the supersu app you just flashed. Then 'cd' to the sdcard or external sd. Then the 'dd' command. The dd command in what I linked to is inevitbaly what all those .bat files in the Windows TA Backup thing does after it does a bit of looking around to find the TA partition for a particular phone model.
The md5sum part of what I linked to compares the partitionn itself to the image file you just wrote, you just look at it to see that there are two of them (that it didn't fail) and that they are the same.
The last part pulls the image file to the hard drive, but there are other ways to accomplish this obviously. If you have a cloud storage you can upload it there, or send it as an email attahment, put it on the external sd, etc etc.
Also, in many cases, once you unlock the bootloader to flash something else, you'lle need to install TWRP again from the command line, pushing it straight to a phone partition. You'lle need help with this if you haven't done it before.

[MODULE] Google Contacts Storage (works with Google Phone)

DESCRIPTION
If you have the Pixel Experience module installed on your phone and installed Google Phone from the Play Store or ever tried to use a patched Google Phone version (such as this one), you may have noticed that Google Phone force closes when you try to search for a contact or while opening the keypad. This Magisk module attempts to fix that and it works by replacing your non-AOSP contacts storage with Google's own version, the one supported by Google Phone.
IMPORTANT NOTES
Supports Android versions from Android 7 (Nougat) to Android P.
It will remove any phone/dialer/contacts/people applications from your phone (if supported) because they are incompatible with Google's Contacts Storage.
You should only install this module if you want/need to use Google Phone and Google Contacts.
TESTED/SUPPORTED DEVICES
HTC 10 (Sense based ROMs).
Note: It should work with other devices but I have no means no test them myself, I can only rely on the community to test this for me.
SPECIAL INSTRUCTIONS
Install the Magisk module as usual but DO NOT reboot your device just yet.
Go into "Settings » Accounts & Sync" and disable "Automatically sync data".
Go into "Settings » Apps" a, look for "Contacts Storage" (it's a system app) and clear application data.
Reboot your device now!
Go into "Settings » Accounts & Sync" and enable "Automatically sync data".
Google Phone should now work without force closing, hopefully.
Note: If you ever want/need to disable this module, you should also follow the procedure above (disable module, disable data synchronization, clear contacts storage data, reboot, and re-enable contacts synchronization).
DISCLAIMER
Install this module at your own risk.
Developer is not responsible for what you do on your device.
Please take all necessary precautions (like a nandroid backup) before installing this module.
DOWNLOADS
Google-Contacts-Storage-v0.0.0-TESTING.4.zip
XDA:DevDB Information
Google Contacts Storage, Tool/Utility for the XDA Community Apps
Contributors
rfgamaral
Version Information
Status: Testing
Current Beta Version: v0.0.0-TESTING.4
Beta Release Date: 2018-08-02
Created 2018-08-01
Last Updated 2018-08-02

@rfgamaral after installing magisk module and rebooting i keep getting android.process.acore has stopped.
I cannot get rid of it. By pressing ok all the time i managed to arrive to Apps but there is no Contact Storage app to clear data/cache after the reboot.

stathis95194 said:
@rfgamaral after installing magisk module and rebooting i keep getting android.process.acore has stopped.
I cannot get rid of it. By pressing ok all the time i managed to arrive to Apps but there is no Contact Storage app to clear data/cache after the reboot.
Click to expand...
Click to collapse
I also got that error when developing this module but I never got it after installing/enabling it, only after disabling it.
For some reason, the system does not recognize the /system/priv-app/ContactsProvider/ContactsProvider.apk (although the file is there). I'm not sure how to fix this to be honest, so I recommend you restore your backup to get you back to a working state. Maybe try the whole process again (makre sure you follow every single step) and instead of rebooting the system after installing the module, reboot to recovery and wipe dalvik/ART and cache. If that doesn't help, restore the device again until a solution for this problem is found.
Like I said, I also had this problem and because I live on the edge, I didn't make a backup of my system (idiot me). I had to make the system recognize the ContactsProvider.apk file and wen into recovery, deleted, copied it back from my ROM, set proper folder/file permissions, wiped dalvik/ART and cache and rebooted, the problem was gone. I installed my module again and it worked. But I'm honestly afraid to disable it and get that error back.
Which is weird because I'm replacing this file systemlessly, that's the whole point of Magisk. Maybe I'm doing something wrong, I'm no expert... We'll probably need help from someone with more knowledge on the whole Android system. But for the record, I currently have the version available on this thread installed on my phone. I have the Pixel Experience module installed and installed Google Phone from the store, it doesn't force close and all features seem to be working. I just need to get this module stable.

@stathis95194 Were you able to restore your device? I hope so... I've uploaded a new test version, didn't change much, not sure if it fixes anything.

rfgamaral said:
@stathis95194 Were you able to restore your device? I hope so... I've uploaded a new test version, didn't change much, not sure if it fixes anything.
Click to expand...
Click to collapse
Yeap I always take a nandroid before messing with the phone. Let me try the new version and report
Sent from my HTC 10 using Tapatalk

@rfgamaral soooo after flashing 0.0.4 i faced the same issue with android.process.acore has stopped popping all the time.
This time i took a different approach and didn't restore my nandroid. Instead i dirty flashed my LeeDroid rom.
Rebooted and lo and behold, stock dialer and contacts were missing and google phone was working perfectly. No crashing on searching (nearby places is working)
Now i need to test caller id and spam filter
I will keep testing and let you know.

stathis95194 said:
@rfgamaral soooo after flashing 0.0.4 i faced the same issue with android.process.acore has stopped popping all the time.
This time i took a different approach and didn't restore my nandroid. Instead i dirty flashed my LeeDroid rom.
Rebooted and lo and behold, stock dialer and contacts were missing and google phone was working perfectly. No crashing on searching (nearby places is working)
Now i need to test caller id and spam filter
I will keep testing and let you know.
Click to expand...
Click to collapse
Awesome, glad you got it working.
Now I just need to understand why installing this module crashes android.process.acore... But it's a bummer that this is happening, a little price to pay, I guess? At least until a fix is found... That and that whole install procedure which is required to avoid other different crashes because of incompatible storages.

Hi
I'm running 2.42.400.3 on U11.
I installed this and google phone from
https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218
Dialer kept crashing so I installed your mod.
After that,com.android .phone keeps crashing.
I unistalled it and then I got acore crashing.
I restored feom nandroid but for some reason kept getting the acore crash, so I completely uninstalled magisk.
Now.... everything works. Even the dialer.
I'm really not sure what happened but.... thanks

gunnerhk said:
Hi
I'm running 2.42.400.3 on U11.
I installed this and google phone from
https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218
Dialer kept crashing so I installed your mod.
After that,com.android .phone keeps crashing.
I unistalled it and then I got acore crashing.
I restored feom nandroid but for some reason kept getting the acore crash, so I completely uninstalled magisk.
Now.... everything works. Even the dialer.
I'm really not sure what happened but.... thanks
Click to expand...
Click to collapse
That's really weird, on so many levels... :/

Screenshot as proof :laugh:

[ROM][TMOBILE][S7_SM-G930T][Oreo 8.0 Rooted][WifiCalling]

Updated version of this ROM: [ROM][TMOBILE][S7_SM-G930T][Oreo 8.0 Rooted][WifiCalling]G930TUVU4CRI2
ROM last updated: 10/30/2018
Introduction:
HUGE thanks to the guys that got this going like root & figuring out hybrid stocks! This ROM is a complete rewrite of my ROM [ROM][TMOBILE][S7_SM-G930T][Oreo Rooted] That ROM doesnt have WifiCalling & I couldn't get it to work for the life of me, so I rewrote it. I started with stock, and slowly stepped back making changes, reinstalling each time, confirming it still worked. About 200 installs later & 1000s of changes, this is the result. Yes, it took a LONG time. Hope you enjoy it! Don't forget to say Thanks so I know it is actually helpful to others, and continue doing this!
Description:
Stock Tmobile Oreo 8.0 modified (G930TUVU4CRF1)
EXTREMELY debloated! Nearly bare minimum, while still retaining hardware functionality. Eg, Samsung Gallery & Camera exist so we get 4k recording, and there aren't errors when we pull up the Gallery to edit, etc. Yes, this means NO Samsung or Android Pay. There could be more apps to debloat but Im out of time for now! (Please provide suggestions if interested)
Everything possible I replace Samsung with Google
Solid ROM. It was actually kind of slow for me, but I'm curious how this works for others.
Xposed is part of the guide, which will give you infinite customization & tweak-ability
If you hate Samsung SW and just want a solid working ROM with very few install options to get you up and running this is for you.
This will delete all of your data on the phone! (Not external SD card) This is the only way so don't ask. Backup your data!
Features:
Tmobile Wifi Calling works, along with Visual Voicemail & Mobile Hotspot
Many Aroma Installer app options
(Optional) KevinsFavorites option in Aroma. I'm not sure I'd recommend it due to my tastes. If you're looking for some good common apps tho, it includes: Amazon, AmazonMusic, AquaMail, Gmail, GoogleDrive, GoogleKeep, GooglePhoto, Hangouts, IFTTT, Pandora, RootBrowserClassic, TitaniumBackup, Uber, & Wink (If you install these and want to remove them later, use TitaniumBackup (or similiar) to uninstall
Root Features: See Downloads->Recommended Root Zip & say Thanks!
Debloated
De-Knoxed
Decrypted /data/ partition
OTAs disabled
Speed & Build Prop Tweaks
Dual speaker
Ruthless Launcher
Apps
AdAway
AOD Clock Face Themes
CPUSpy
DisableService
Kernel Adiutor
Samsung Video Editor and Trimmer
Xposed
Many more...
Download Links:
Base.7z & Oreo_Kevin71246Modded_v3.#.#.zip
Installation:
This will delete all of your data! If you continue, you acknowledge that the Author is NOT responsible for anything that happens to your phone!
Summary (for Pros)
Flash Oreo stock
Root
Flashfire
Oreo_Kevin71246Modded_v3.1.##, Auto-mount, Mount /system read/write Option
Go through Aroma setup. When finished, it should boot to Recovery (if not do this). Do a "Wipe data/factory reset"->Reboot
Detailed Steps
Install Stock Oreo:
Download mode & Setup
Make sure you have latest device drivers setup on your PC
Enable USB Debugging on phone in Developer Settings
Boot phone into Download Mode:
Turn off your device
Press and hold Volume Down + Home + Power button
When you see the warning screen, release buttons & press Vol UP. Phone should say "Downloading..."
Download and unzip Base.7z to PC (This contains stock Oreo, ODIN, & root)
ODIN
Open ODIN on PC (\Base\Odin_313.exe)
Connect USB from PC to phone. ID:COM in Odin should turn Blue with a COM port
Select AP, BL, CP and CSC files from the \Oreo_Stock\Base\ folder for corresponding files
Select HERO2QLTE_USA_VZW.pit
Select Start
Finished: Phone will reboot & show Carrier screen for 3-5mins. Wait until Setup screen & go through quickly (bare minimum) since you'll wipe it again. Once in Android, go to Settings->Display->Screen resolution->WQHD->Apply
Root Instructions: (+Flashfire, SuperSU)
Reboot phone into Download mode
Odin
AP: Select \Base\Root\AP_SM_G930_OREO_ENG_BOOT.tar
Start-> Wait for phone to boot to Android OS
Root
Double-click \Base\Root\cmd-here.exe & Type: root.bat [enter]
Option: 1 (Install Root No tweaks) (Or pick whatever you want)
*Note: With this system root, do not update su binary. Disable notifications for SuperSU app. Don't flash any superuser zips in recovery that are not made by jrkruse
Install Custom Hybrid ROM & Xposed
Download & copy Oreo_Kevin71246Modded_v##.zip to phone
Flashfire
Open Flashfire on phone
Red + symbol->Flash Zip or OTA->Oreo_Kevin71246Modded_v#, Auto-mount, Mount /system read/write Option->Check mark
Click Lighting bolt at bottom-> OK
Phone will reboot to Aroma. Go through setup. (See above for what's in KevinsFavorites)
When finished, allow Aroma to exit.
It should reboot into Recovery (If not, do this: immediately hold Vol-Up btn+Home btn until you see recovery on screen. If you missed it, try again: hold Vol-Down+Pwr btn ~10sec until phone restarts & immediately hold Vol-Up btn+Home btn until you see recovery on screen.)
In recovery: Factory Reset->Yes->Restart phone
*Wait 5-10min on loading screens
Go thru Android setup. Ignore "Xposed Installer has stopped" error
Followup-Steps:
Set Dialer: Phone Settings->Apps->Menu->Default Apps->Calling App->Select Phone
Recommendations:
Xposed
Setup Xposed: Xposed Installer app:Install framework option & restart phone
Xposed Installer app: Settings button (3 lines)->Download->Search "GravityBox [O]"->Click it->Versions tab->Download->Install->Back arrow (upper left)->Settings->Modules->Check box next to GravityBox [O]->Restart phone
GravityBox [O] Tweaks: (Open GravityBox app)
Battery indicator: Statusbar tweaks->Battery settings->Turn on Master switch->Battery indicatory style: None->Battery percent text...->Back
Clock: Statusbar tweaks->Clock settings->Turn on Master switch->Center clock...
Firefds Kit [O] Tweaks: (Install same way as Gravity box)
This is a supplement to Gravitybox. Things of note: Advanced power menu, call recording, & disable bluetooth toggle popup, etc
Known Issues:
Visual Voicemail may fail to register, but restart phone and give it a few hours. It works eventually.
RCS (Rich Communication Services/AdvancedMessages/Chat) texts don't show up in Android Messages & Textra, etc apps (This is an issue on stock as well!!)
Fix: (Use Samsung Messages)
How to Install Samsung Messages via ADB (Easiest way though is just reinstall!):
Download Messaging_SEP81.zip, unzip, & manually copy apk to phone via usb/Windows My Computer
adb shell (Get into shell to run beow commands)
su (Run as root)
mount -o rw,remount /system (Mount system read/write since default it read-only)
chmod 755 /system/priv-app/Messaging_SEP81 (Set permissions on folder)
chmod -R 644 /system/priv-app/Messaging_SEP81 (Set permissions on apk file)
ls -l /system/priv-app/Messaging_SEP81 (Check permissions - Should be: -rw-r--r-- 1 root root - not sure what 1 & 2 is)
ls -l /system/priv-app | grep "Messaging" (Check permissions - Should be: drwxr-xr-x 2 root root)
reboot (Reboot device)
Changelog:
Version 3.1.32: First stable build
Ver 3.1.36:
-Disabled encryption on /data/ partition to resolve "Bluetooth paired devices deleted after reboot" issue & so mods play nicer with ROM
-Fixed "Device not supported" error on Google Phone app
Ver 3.1.37:
-Added most of the apps I replaced or added as options in Aroma Installer now
Credits:
- @jrkruse & @klabit87 for Root
- @partcyborg for helping jrkruse
- @jrkruse for his similar ROMs as guides & help
- @Lanc-City for assistance in ROM modding
- @gustco for eng boot.img
- @Raymonf for modified odin
- @amarullz for Aroma Installer
- @Chainfire for FlashFire & SuperSU
- @rovo89 for Xposed
- @JaeKar99 for the cool & colorful boot animation
- @mrRobinson for AdAway ADAway.org
- Brandon Valosek for CPUSpy
- WangQi for DisableService
- Willi Ye for Kernel Adiutor
- @shubby for Ruthless Launcher
- @Craz Basics for Dual Speaker Mod
...
- Please PM me if you were forgotten!

Some screenies:

Saved2

Saved3

Well nice job!

jrkruse said:
Well nice job!
Click to expand...
Click to collapse
...but your'e the best! (You & I both know I couldnt have done it without all your other work!)
Once I FINALLY got WifiCalling to work, I thought... Imagine ALL the S7 XDA members out there with crappy Tmobile signal across Rural America that could TOTALLY use Wifi Calling!!! Haha, but seriously!! & that thought was the birth of this thread

kevin71246 said:
...but your'e the best! (You & I both know I couldnt have done it without all your other work!)
Once I FINALLY got WifiCalling to work, I thought... Imagine ALL the S7 XDA members out there with crappy Tmobile signal across Rural America that could TOTALLY use Wifi Calling!!! Haha, but seriously!! & that thought was the birth of this thread
Click to expand...
Click to collapse
Is this Ufirm firmware?

jrkruse said:
Is this Ufirm firmware?
Click to expand...
Click to collapse
I have so many FW packages on my PC at this point, from so many places that I used while trying to get this to work, but I think it might be a package from one of your threads(?) Since I'm not exactly sure what you're asking regarding "Ufirm FW", I'll elaborate hoping that answers your question. (Tho I'm thinking you mean the U variation/unlocked. So based on these stock files below I guess the answer is no.) If you're question is really, "is it possible to get tmobile wifi calling to work on a U model #", then I'd have to really think about that. But at this point I don't have an answer. I can tell you a million dependencies about it tho! (I seriously have hundreds of revisions I made while testing, & notes. The symbolic & meta links in Aroma initially broke it, as I found out after a week or so of testing - wish I knew a bit more about them, and why they're all there, then I'd know what was wrong about them...)
High-level process:
1)Flash Base/Stock/Oreo Rom:
- AP_G930TUVU4CRF1.tar
- BL_G930TUVU4CRF1.tar
- CP_G930TUVU4CRF1.tar
- CSC_TMB_G930TTMB4CRF1.tar
- HEROQLTE_USA_VZW.pit
2)Root with your method
3)Flash Xposed framework & my ROM (it's a "start with stock then remove what we don't want" type of Aroma/Edify script)

jrkruse said:
Is this Ufirm firmware?
Click to expand...
Click to collapse
BTW, any idea how to prevent the "verification failed" error I mention in the OP steps, after flashing Xposed framework? I tried flashing dm-noverity but no luck. At least my guide covers it at this point tho... Thanks again

kevin71246 said:
BTW, any idea how to prevent the "verification failed" error I mention in the OP steps, after flashing Xposed framework? I tried flashing dm-noverity but no luck. At least my guide covers it at this point tho... Thanks again
Click to expand...
Click to collapse
If you choose the keep safestrap option during root the it will flash the system/vendor/etc/ fstab.qcom that totally removes data encryption but when that fstab.qcom is flashed it also requires a data wipe for phone to boot then when you install xposed you won’t see that error but either way you end up wiping data so your choice
Sent using some kind of device I modified

It works perfectly!!
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!

First, I want to thank you so much kevin71246. I tried your previous version as I was sick and tired of how sluggish my phone felt after the last two T-Mobile OTA updates. So far the experience on the phone has been great but I wanted to post about an issue I had with that version to see if anyone else has come across it or can figure out what is going on. The reason I am making this a reply in this thread instead of your other is because I will be flashing this update shortly but I want to get the ball rolling on the issue first.
I went through the whole process, installing the minimum with Google Apps, though I did restore everything previously installed once I log in with my Goggle Account. I am unsure if this contributed to the problem but I will not be restoring apps on the next try. It seems no matter what process I attempt to connect my Ticwatch E to my S7 the Wear OS app will not recognize it which causes the watch to get stuck in the setup phase, making it useless. This was after multiple and different connection attempts, resets, reboots and factory (watch only) restores. The watch will show up under bluetooth and create the initial connection but it will not stay connected. Anyone have any idea? Is this ROM missing something?
Edit: Mid way through the install, I wanted to note that I checked for the issue after doing the "Install Stock Oreo" but before Root and everything worked as it should. Wear OS sees the watch instantly and Bluetooth connects fine.
Edit: So I am a day into using the ROM and I am still having issues. While it will connect and work perfectly fine now, when ever I do a reboot of the phone the watch no longer connects. I will just get constant Bluetooth Connection Requests, every single time the watch tries to get data, and it never actually connects. To fix this I need to do a complete reset of the watch and do the whole setup process again. As you can imagine this is no good, expecting to wipe my watch every time my phone reboots makes it still almost useless.

charredchar said:
First, I want to thank you so much kevin71246. I tried your previous version as I was sick and tired of how sluggish my phone felt after the last two T-Mobile OTA updates. So far the experience on the phone has been great but I wanted to post about an issue I had with that version to see if anyone else has come across it or can figure out what is going on. The reason I am making this a reply in this thread instead of your other is because I will be flashing this update shortly but I want to get the ball rolling on the issue first.
I went through the whole process, installing the minimum with Google Apps, though I did restore everything previously installed once I log in with my Goggle Account. I am unsure if this contributed to the problem but I will not be restoring apps on the next try. It seems no matter what process I attempt to connect my Ticwatch E to my S7 the Wear OS app will not recognize it which causes the watch to get stuck in the setup phase, making it useless. This was after multiple and different connection attempts, resets, reboots and factory (watch only) restores. The watch will show up under bluetooth and create the initial connection but it will not stay connected. Anyone have any idea? Is this ROM missing something?
Edit: Mid way through the install, I wanted to note that I checked for the issue after doing the "Install Stock Oreo" but before Root and everything worked as it should. Wear OS sees the watch instantly and Bluetooth connects fine.
Edit: So I am a day into using the ROM and I am still having issues. While it will connect and work perfectly fine now, when ever I do a reboot of the phone the watch no longer connects. I will just get constant Bluetooth Connection Requests, every single time the watch tries to get data, and it never actually connects. To fix this I need to do a complete reset of the watch and do the whole setup process again. As you can imagine this is no good, expecting to wipe my watch every time my phone reboots makes it still almost useless.
Click to expand...
Click to collapse
I believe I know what the issue is, I'm testing a fix (for THIS ROM) as we speak. Stay tuned. Maybe tomorrow if I have time and it works I'll update the OP. BTW, this ROM and my other ROM are TOTALLY different. Thanks for the feedback!

FranMLG said:
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
Click to expand...
Click to collapse
What do you mean by this? "but if you do not pull them, let me know"
And tell me more about Viper4Android, and if it works solid for you on this ROM...then I'll consider adding it. Thanks!

New version, see change log in OP for details.

Yeah i.a give this a shot in a little. Do I need to root phone or can I just flash through Odin. Sorry not used to this locked bootloader crap..... s8crj1 are the last 6 digits of the software I'm on. I did receive the latest update will this effect me installing this. Sorry as I said not used to this locked bootloader crap.

jrkruse said:
If you choose the keep safestrap option during root the it will flash the system/vendor/etc/ fstab.qcom that totally removes data encryption but when that fstab.qcom is flashed it also requires a data wipe for phone to boot then when you install xposed you won’t see that error but either way you end up wiping data so your choice
Sent using some kind of device I modified
Click to expand...
Click to collapse
Hi, why you have to flash this - HEROQLTE_USA_VZW.pit on 930t, is it ROM specified? if I do and don't then what are pro and cons?
---------- Post added at 01:36 PM ---------- Previous post was at 01:26 PM ----------
josh2020glacier said:
Yeah i.a give this a shot in a little. Do I need to root phone or can I just flash through Odin. Sorry not used to this locked bootloader crap..... s8crj1 are the last 6 digits of the software I'm on. I did receive the latest update will this effect me installing this. Sorry as I said not used to this locked bootloader crap.
Click to expand...
Click to collapse
since bootloader is locked you can't use TWRP so you have to use Flashfire to install this ROM, as you know flashfire required root so you have to setup the base per OP and then root the base then install the ROM and then root it again, read the first page I don't think you will get a instructions more detailed then his

Okay so I just realised I was posting comments on the old thread, my bad. Coming back to the question, can the boot animation be changed? I've messed with the qmg files in an attempt to replace the weird, nauseating rainbow animation but even after overwriting the latter, it persists. Looking forward to a reply kek

Alkan3 said:
Okay so I just realised I was posting comments on the old thread, my bad. Coming back to the question, can the boot animation be changed? I've messed with the qmg files in an attempt to replace the weird, nauseating rainbow animation but even after overwriting the latter, it persists. Looking forward to a reply kek
Click to expand...
Click to collapse
Nauseating rainbow? LOL. Sorry. This is much more of a general question though, that wouldn't exactly pertain to this ROM specifically. And given I don't have an answer, I'd try searching BootAnimation How-Tos to get this customized. The ONLY thing I did regarding this was replaced the existing files with the rainbow ones. That's it. Apologies in advance.

Just discovered an issue: RCS (Rich Communication Services / Chat) texts don't show up in Android Messages app. See "Known Issues" in OP for a solution. BTW I posted a new ROM version a few days back that allows many choices in Aroma Installer. Make sure to pick Samsung Messages (instead of Google), so you get RCS chat text messages!